diff options
Diffstat (limited to 'arch/arm/plat-samsung')
29 files changed, 76 insertions, 1141 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a9d52167e16e..91c2d72e689b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -37,14 +37,6 @@ if PLAT_SAMSUNG comment "Boot options" -config S3C_BOOT_WATCHDOG - bool "S3C Initialisation watchdog" - depends on S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" help @@ -125,12 +117,6 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - config S5P_GPIO_DRVSTR bool help diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 51afedda9ab6..8f456bed4fa0 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <linux/amba/pl330.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -62,7 +63,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -878,51 +878,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* MFC */ - -#ifdef CONFIG_S5P_DEV_MFC -static struct resource s5p_mfc_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_MFC), -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif /* CONFIG_S5P_DEV_MFC */ - /* MIPI CSIS */ #ifdef CONFIG_S5P_DEV_CSIS0 @@ -1552,6 +1507,9 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1590,6 +1548,9 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1628,6 +1589,9 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 71d58ddea9c1..ec0d731b0e7b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -23,23 +23,15 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct device *dev, char *ch_name) { dma_cap_mask_t mask; - void *filter_param; dma_cap_zero(mask); dma_cap_set(param->cap, mask); - /* - * If a dma channel property of a device node from device tree is - * specified, use that as the fliter parameter. - */ - filter_param = (dma_ch == DMACH_DT_PROP) ? - (void *)param->dt_dmach_prop : (void *)dma_ch; - if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else return (unsigned)dma_request_channel(mask, pl330_filter, - filter_param); + (void *)dma_ch); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h deleted file mode 100644 index ba028f1ed30b..000000000000 --- a/arch/arm/plat-samsung/include/plat/common-smdk.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void smdk_machine_init(void); diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S deleted file mode 100644 index f3a9cff6d5d4..000000000000 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ /dev/null @@ -1,87 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/debug-macro.S - * - * Copyright 2005, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/regs-serial.h> - -/* The S5PV210/S5PC110 implementations are as belows. */ - - .macro fifo_level_s5pv210 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S5PV210_UFSTAT_TXMASK - .endm - - .macro fifo_full_s5pv210 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S5PV210_UFSTAT_TXFULL - .endm - -/* The S3C2440 implementations are used by default as they are the - * most widely re-used */ - - .macro fifo_level_s3c2440 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - -#ifndef fifo_level -#define fifo_level fifo_level_s3c2440 -#endif - - .macro fifo_full_s3c2440 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2440_UFSTAT_TXFULL - .endm - -#ifndef fifo_full -#define fifo_full fifo_full_s3c2440 -#endif - - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH] - .endm - - .macro busyuart, rd, rx - ldr \rd, [\rx, # S3C2410_UFCON] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_full \rd, \rx - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [\rx, # S3C2410_UTRSTAT] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm - - .macro waituart,rd,rx - ldr \rd, [\rx, # S3C2410_UFCON] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_level \rd, \rx - teq \rd, #0 - bne 1003b - b 1002f -1001: - @ idle waiting for non fifo - ldr \rd, [\rx, # S3C2410_UTRSTAT] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 114178268b75..ce6d7634b6cb 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -18,7 +18,6 @@ struct samsung_dma_req { enum dma_transaction_type cap; - struct property *dt_dmach_prop; struct s3c2410_dma_client *client; }; diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index d384a8016b47..abe07fae71db 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,6 @@ * use these just as IDs. */ enum dma_ch { - DMACH_DT_PROP = -1, DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b885322717a1..9ae507270785 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,55 +15,7 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ -/* S3C_FB_MAX_WIN - * Set to the maximum number of windows that any of the supported hardware - * can use. Since the platform data uses this for an array size, having it - * set to the maximum of any version of the hardware can do is safe. - */ -#define S3C_FB_MAX_WIN (5) - -/** - * struct s3c_fb_pd_win - per window setup data - * @xres : The window X size. - * @yres : The window Y size. - * @virtual_x: The virtual X size. - * @virtual_y: The virtual Y size. - */ -struct s3c_fb_pd_win { - unsigned short default_bpp; - unsigned short max_bpp; - unsigned short xres; - unsigned short yres; - unsigned short virtual_x; - unsigned short virtual_y; -}; - -/** - * struct s3c_fb_platdata - S3C driver platform specific information - * @setup_gpio: Setup the external GPIO pins to the right state to transfer - * the data from the display system to the connected display - * device. - * @vidcon0: The base vidcon0 values to control the panel data format. - * @vidcon1: The base vidcon1 values to control the panel data output. - * @vtiming: Video timing when connected to a RGB type panel. - * @win: The setup data for each hardware window, or NULL for unused. - * @display_mode: The LCD output display mode. - * - * The platform data supplies the video driver with all the information - * it requires to work with the display(s) attached to the machine. It - * controls the initial mode, the number of display windows (0 is always - * the base framebuffer) that are initialised etc. - * - */ -struct s3c_fb_platdata { - void (*setup_gpio)(void); - - struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - struct fb_videomode *vtiming; - - u32 vidcon0; - u32 vidcon1; -}; +#include <linux/platform_data/video_s3c.h> /** * s3c_fb_set_platdata() - Setup the FB device with platform data. diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h deleted file mode 100644 index e21a89bc26c9..000000000000 --- a/arch/arm/plat-samsung/include/plat/irq.h +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/irq.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C24XX CPU IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) - -/* these are exported for arch/arm/mach-* usage */ -extern struct irq_chip s3c_irq_level_chip; -extern struct irq_chip s3c_irq_chip; - -static inline void s3c_irqsub_mask(unsigned int irqno, - unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) - __raw_writel(mask | parentbit, S3C2410_INTMSK); - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void s3c_irqsub_unmask(unsigned int irqno, - unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void s3c_irqsub_maskack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void s3c_irqsub_ack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -/* exported for use in arch/arm/mach-s3c2410 */ - -#ifdef CONFIG_PM -extern int s3c_irq_wake(struct irq_data *data, unsigned int state); -#else -#define s3c_irq_wake NULL -#endif - -extern int s3c_irqext_type(struct irq_data *d, unsigned int type); diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h deleted file mode 100644 index 2f7c17de8ac8..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-iic.h +++ /dev/null @@ -1,56 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 I2C Controller -*/ - -#ifndef __ASM_ARCH_REGS_IIC_H -#define __ASM_ARCH_REGS_IIC_H __FILE__ - -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ - -#define S3C2410_IICREG(x) (x) - -#define S3C2410_IICCON S3C2410_IICREG(0x00) -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) -#define S3C2410_IICADD S3C2410_IICREG(0x08) -#define S3C2410_IICDS S3C2410_IICREG(0x0C) -#define S3C2440_IICLC S3C2410_IICREG(0x10) - -#define S3C2410_IICCON_ACKEN (1<<7) -#define S3C2410_IICCON_TXDIV_16 (0<<6) -#define S3C2410_IICCON_TXDIV_512 (1<<6) -#define S3C2410_IICCON_IRQEN (1<<5) -#define S3C2410_IICCON_IRQPEND (1<<4) -#define S3C2410_IICCON_SCALE(x) ((x)&15) -#define S3C2410_IICCON_SCALEMASK (0xf) - -#define S3C2410_IICSTAT_MASTER_RX (2<<6) -#define S3C2410_IICSTAT_MASTER_TX (3<<6) -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) -#define S3C2410_IICSTAT_MODEMASK (3<<6) - -#define S3C2410_IICSTAT_START (1<<5) -#define S3C2410_IICSTAT_BUSBUSY (1<<5) -#define S3C2410_IICSTAT_TXRXEN (1<<4) -#define S3C2410_IICSTAT_ARBITR (1<<3) -#define S3C2410_IICSTAT_ASSLAVE (1<<2) -#define S3C2410_IICSTAT_ADDR0 (1<<1) -#define S3C2410_IICSTAT_LASTBIT (1<<0) - -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) - -#define S3C2410_IICLC_FILTER_ON (1<<2) - -#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h deleted file mode 100644 index 930ea8b88ed3..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-onenand.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * - * Copyright (C) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __SAMSUNG_ONENAND_H__ -#define __SAMSUNG_ONENAND_H__ - -#include <mach/hardware.h> - -/* - * OneNAND Controller - */ -#define MEM_CFG_OFFSET 0x0000 -#define BURST_LEN_OFFSET 0x0010 -#define MEM_RESET_OFFSET 0x0020 -#define INT_ERR_STAT_OFFSET 0x0030 -#define INT_ERR_MASK_OFFSET 0x0040 -#define INT_ERR_ACK_OFFSET 0x0050 -#define ECC_ERR_STAT_OFFSET 0x0060 -#define MANUFACT_ID_OFFSET 0x0070 -#define DEVICE_ID_OFFSET 0x0080 -#define DATA_BUF_SIZE_OFFSET 0x0090 -#define BOOT_BUF_SIZE_OFFSET 0x00A0 -#define BUF_AMOUNT_OFFSET 0x00B0 -#define TECH_OFFSET 0x00C0 -#define FBA_WIDTH_OFFSET 0x00D0 -#define FPA_WIDTH_OFFSET 0x00E0 -#define FSA_WIDTH_OFFSET 0x00F0 -#define TRANS_SPARE_OFFSET 0x0140 -#define DBS_DFS_WIDTH_OFFSET 0x0160 -#define INT_PIN_ENABLE_OFFSET 0x01A0 -#define ACC_CLOCK_OFFSET 0x01C0 -#define FLASH_VER_ID_OFFSET 0x01F0 -#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ - -#define ONENAND_MEM_RESET_HOT 0x3 -#define ONENAND_MEM_RESET_COLD 0x2 -#define ONENAND_MEM_RESET_WARM 0x1 - -#define CACHE_OP_ERR (1 << 13) -#define RST_CMP (1 << 12) -#define RDY_ACT (1 << 11) -#define INT_ACT (1 << 10) -#define UNSUP_CMD (1 << 9) -#define LOCKED_BLK (1 << 8) -#define BLK_RW_CMP (1 << 7) -#define ERS_CMP (1 << 6) -#define PGM_CMP (1 << 5) -#define LOAD_CMP (1 << 4) -#define ERS_FAIL (1 << 3) -#define PGM_FAIL (1 << 2) -#define INT_TO (1 << 1) -#define LD_FAIL_ECC_ERR (1 << 0) - -#define TSRF (1 << 0) - -#endif diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h deleted file mode 100644 index 0f8263e93eea..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) -#define S3C2410_INTP S3C2410_RTCREG(0x30) -#define S3C2410_INTP_ALM (1 << 1) -#define S3C2410_INTP_TIC (1 << 0) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1 << 0) -#define S3C2410_RTCCON_CNTSEL (1 << 2) -#define S3C2410_RTCCON_CLKRST (1 << 3) -#define S3C2443_RTCCON_TICSEL (1 << 4) -#define S3C64XX_RTCCON_TICEN (1 << 8) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1 << 7) - -/* S3C2443: tick count is 15 bit wide - * TICNT[6:0] contains upper 7 bits - * TICNT1[7:0] contains lower 8 bits - */ -#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) -#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) -#define S3C2443_TICNT1_PART(x) (x & 0xff) - -/* S3C2416: tick count is 32 bit wide - * TICNT[6:0] contains bits [14:8] - * TICNT1[7:0] contains lower 8 bits - * TICNT2[16:0] contains upper 17 bits - */ -#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) -#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1 << 6) -#define S3C2410_RTCALM_YEAREN (1 << 5) -#define S3C2410_RTCALM_MONEN (1 << 4) -#define S3C2410_RTCALM_DAYEN (1 << 3) -#define S3C2410_RTCALM_HOUREN (1 << 2) -#define S3C2410_RTCALM_MINEN (1 << 1) -#define S3C2410_RTCALM_SECEN (1 << 0) - -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) - -#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h deleted file mode 100644 index e34049ad44cc..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C Platform - SDHCI (HSMMC) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C_SDHCI_REGS_H -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ - -#define S3C_SDHCI_CONTROL2 (0x80) -#define S3C_SDHCI_CONTROL3 (0x84) -#define S3C64XX_SDHCI_CONTROL4 (0x8C) - -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) - -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) - -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) - -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) - -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) - -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) - -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) - -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) - -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) - -#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 29c26a818842..f05f2afa440d 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,281 +1 @@ -/* arch/arm/plat-samsung/include/plat/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_CLKSHIFT (10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C6400_UCON_CLKMASK (3<<10) -#define S3C6400_UCON_CLKSHIFT (10) -#define S3C6400_UCON_PCLK (0<<10) -#define S3C6400_UCON_PCLK2 (2<<10) -#define S3C6400_UCON_UCLK0 (1<<10) -#define S3C6400_UCON_UCLK1 (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_CLKSHIFT (10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_CLKMASK (1 << 10) -#define S3C2410_UCON_CLKSHIFT (10) -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -/* S3C64XX interrupt registers. */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -#define S3C64XX_UINTM_RXD (0) -#define S3C64XX_UINTM_TXD (2) -#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) -#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) - -/* Following are specific to S5PV210 */ -#define S5PV210_UCON_CLKMASK (1<<10) -#define S5PV210_UCON_CLKSHIFT (10) -#define S5PV210_UCON_PCLK (0<<10) -#define S5PV210_UCON_UCLK (1<<10) - -#define S5PV210_UFCON_TXTRIG0 (0<<8) -#define S5PV210_UFCON_TXTRIG4 (1<<8) -#define S5PV210_UFCON_TXTRIG8 (2<<8) -#define S5PV210_UFCON_TXTRIG16 (3<<8) -#define S5PV210_UFCON_TXTRIG32 (4<<8) -#define S5PV210_UFCON_TXTRIG64 (5<<8) -#define S5PV210_UFCON_TXTRIG128 (6<<8) -#define S5PV210_UFCON_TXTRIG256 (7<<8) - -#define S5PV210_UFCON_RXTRIG1 (0<<4) -#define S5PV210_UFCON_RXTRIG4 (1<<4) -#define S5PV210_UFCON_RXTRIG8 (2<<4) -#define S5PV210_UFCON_RXTRIG16 (3<<4) -#define S5PV210_UFCON_RXTRIG32 (4<<4) -#define S5PV210_UFCON_RXTRIG64 (5<<4) -#define S5PV210_UFCON_RXTRIG128 (6<<4) -#define S5PV210_UFCON_RXTRIG256 (7<<4) - -#define S5PV210_UFSTAT_TXFULL (1<<24) -#define S5PV210_UFSTAT_RXFULL (1<<8) -#define S5PV210_UFSTAT_TXMASK (255<<16) -#define S5PV210_UFSTAT_TXSHIFT (16) -#define S5PV210_UFSTAT_RXMASK (255<<0) -#define S5PV210_UFSTAT_RXSHIFT (0) - -#define S3C2410_UCON_CLKSEL0 (1 << 0) -#define S3C2410_UCON_CLKSEL1 (1 << 1) -#define S3C2410_UCON_CLKSEL2 (1 << 2) -#define S3C2410_UCON_CLKSEL3 (1 << 3) - -/* Default values for s5pv210 UCON and UFCON uart registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -#ifndef __ASSEMBLY__ - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - unsigned int clk_sel; - - unsigned int has_fracval; - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[4]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - +#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h index 21d8594d37ca..7b542f7b7938 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -19,7 +19,7 @@ /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) +#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; #endif } diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h deleted file mode 100644 index 55b0e5f51e97..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2410 machine directory - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#ifdef CONFIG_CPU_S3C2410 - -extern int s3c2410_init(void); -extern int s3c2410a_init(void); - -extern void s3c2410_map_io(void); - -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2410_init_clocks(int xtal); - -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#define s3c2410a_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h deleted file mode 100644 index cbae50ddacc8..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2412.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(void); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); - -extern void s3c2412_restart(char mode, const char *cmd); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#define s3c2412_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h deleted file mode 100644 index f27399a3c68d..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2416.h +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> - * - * Header file for s3c2416 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2416 - -struct s3c2410_uartcfg; - -extern int s3c2416_init(void); - -extern void s3c2416_map_io(void); - -extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2416_init_clocks(int xtal); - -extern int s3c2416_baseclk_add(void); - -extern void s3c2416_restart(char mode, const char *cmd); - -extern void s3c2416_init_irq(void); -extern struct syscore_ops s3c2416_irq_syscore_ops; - -#else -#define s3c2416_init_clocks NULL -#define s3c2416_init_uarts NULL -#define s3c2416_map_io NULL -#define s3c2416_init NULL -#define s3c2416_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h deleted file mode 100644 index 71b88ec48956..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2443 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2443 - -struct s3c2410_uartcfg; - -extern int s3c2443_init(void); - -extern void s3c2443_map_io(void); - -extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2443_init_clocks(int xtal); - -extern int s3c2443_baseclk_add(void); - -extern void s3c2443_restart(char mode, const char *cmd); - -extern void s3c2443_init_irq(void); -#else -#define s3c2443_init_clocks NULL -#define s3c2443_init_uarts NULL -#define s3c2443_map_io NULL -#define s3c2443_init NULL -#define s3c2443_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h deleted file mode 100644 index ea0c961b7603..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c244x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2440 and S3C2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -extern void s3c244x_map_io(void); - -extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c244x_init_clocks(int xtal); - -#else -#define s3c244x_init_clocks NULL -#define s3c244x_init_uarts NULL -#endif - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); - -extern void s3c2440_map_io(void); -#else -#define s3c2440_init NULL -#define s3c2440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); - -extern void s3c2442_map_io(void); -#else -#define s3c2442_init NULL -#define s3c2442_map_io NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 9b87f38fc4f4..ce1d0f785efd 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,62 +18,9 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include <linux/platform_data/mmc-sdhci-s3c.h> #include <plat/devs.h> -struct platform_device; -struct mmc_host; -struct mmc_card; -struct mmc_ios; - -enum cd_types { - S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ - S3C_SDHCI_CD_EXTERNAL, /* use external callback */ - S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ - S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ - S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ -}; - -/** - * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI - * @max_width: The maximum number of data bits supported. - * @host_caps: Standard MMC host capabilities bit field. - * @host_caps2: The second standard MMC host capabilities bit field. - * @cd_type: Type of Card Detection method (see cd_types enum above) - * @ext_cd_init: Initialize external card detect subsystem. Called on - * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is a callback to the sdhci-s3c driver - * that triggers the card detection event. Callback arguments: - * dev is pointer to platform device of the host controller, - * state is new state of the card (0 - removed, 1 - inserted). - * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on - * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is the same callback as for ext_cd_init. - * @ext_cd_gpio: gpio pin used for external CD line, valid only if - * cd_type == S3C_SDHCI_CD_GPIO - * @ext_cd_gpio_invert: invert values for external CD gpio line - * @cfg_gpio: Configure the GPIO for a specific card bit-width - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio or - * card speed information. -*/ -struct s3c_sdhci_platdata { - unsigned int max_width; - unsigned int host_caps; - unsigned int host_caps2; - unsigned int pm_caps; - enum cd_types cd_type; - - int ext_cd_gpio; - bool ext_cd_gpio_invert; - int (*ext_cd_init)(void (*notify_func)(struct platform_device *, - int state)); - int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, - int state)); - - void (*cfg_gpio)(struct platform_device *dev, int width); -}; - /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data * @pd: The default platform data for this device. * @set: Pointer to the platform data to fill in. @@ -206,7 +153,7 @@ static inline void s3c6400_default_sdhci2(void) { } /* S5P64X0 SDHCI setup */ -#ifdef CONFIG_S5P64X0_SETUP_SDHCI +#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO static inline void s5p64x0_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC @@ -241,7 +188,7 @@ static inline void s5p64x0_default_sdhci1(void) { } static inline void s5p6440_default_sdhci2(void) { } static inline void s5p6450_default_sdhci2(void) { } -#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ +#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */ /* S5PC100 SDHCI setup */ @@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name) break; } } - #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 959bcdb03a25..ab34dfadb7f9 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -11,10 +11,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; +#include <linux/usb/samsung_usb_phy.h> extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..0fceb4273824 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,15 +16,15 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/cpu.h> #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 002b1472293b..53210ec4e8ec 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -27,6 +27,7 @@ #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-irq.h> +#include <mach/irqs.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 5ec104b5408b..a93fb6fb6606 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -18,10 +18,50 @@ #include <linux/of.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> -#include <plat/irqs.h> #include <plat/mfc.h> +static struct resource s5p_mfc_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_MFC), +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50a..fafdb059043a 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index 103e371f5e35..ff1a76011b1e 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/irqchip/arm-vic.h> +#include <mach/irqs.h> #include <mach/map.h> #include <plat/regs-timer.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index bdf6dadf8790..a030e7301da8 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -25,6 +25,9 @@ #include <asm/asm-offsets.h> #include <asm/hardware/cache-l2x0.h> +#define CPU_MASK 0xff0ffff0 +#define CPU_CORTEX_A9 0x410fc090 + /* * The following code is located into the .data section. This is to * allow l2x0_regs_phys to be accessed with a relative load while we @@ -51,6 +54,12 @@ ENTRY(s3c_cpu_resume) #ifdef CONFIG_CACHE_L2X0 + mrc p15, 0, r0, c0, c0, 0 + ldr r1, =CPU_MASK + and r0, r0, r1 + ldr r1, =CPU_CORTEX_A9 + cmp r0, r1 + bne resume_l2on adr r0, l2x0_regs_phys ldr r0, [r0] ldr r1, [r0, #L2X0_R_PHY_BASE] diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c index 147459327601..66df315990a7 100644 --- a/arch/arm/plat-samsung/setup-mipiphy.c +++ b/arch/arm/plat-samsung/setup-mipiphy.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -50,8 +51,10 @@ int s5p_csis_phy_enable(int id, bool on) { return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN); } +EXPORT_SYMBOL(s5p_csis_phy_enable); int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) { return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN); } +EXPORT_SYMBOL(s5p_dsim_phy_enable); |
