summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap/gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
-rw-r--r--arch/arm/plat-omap/gpio.c160
1 files changed, 134 insertions, 26 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d3c8ea7eecfd..f55f99ae58ae 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -11,7 +11,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -95,6 +94,8 @@
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_SYSSTATUS 0x0014
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
+#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
@@ -111,8 +112,6 @@
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
-#define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff)
-
struct gpio_bank {
void __iomem *base;
u16 irq;
@@ -217,11 +216,13 @@ static inline int gpio_valid(int gpio)
{
if (gpio < 0)
return -1;
+#ifndef CONFIG_ARCH_OMAP24XX
if (OMAP_GPIO_IS_MPUIO(gpio)) {
- if ((gpio & OMAP_MPUIO_MASK) > 16)
+ if (gpio >= OMAP_MAX_GPIO_LINES + 16)
return -1;
return 0;
}
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx() && gpio < 16)
return 0;
@@ -530,6 +531,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
return;
}
__raw_writel(gpio_mask, reg);
+
+ /* Workaround for clearing DSP GPIO interrupts to allow retention */
+ if (cpu_is_omap2420())
+ __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
}
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -537,6 +542,49 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
}
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+ void __iomem *reg = bank->base;
+ int inv = 0;
+ u32 l;
+ u32 mask;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_MASKIT;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_MASK;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_IRQENABLE1;
+ mask = 0xffff;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_IRQENABLE1;
+ mask = 0xffffffff;
+ break;
+ default:
+ BUG();
+ return 0;
+ }
+
+ l = __raw_readl(reg);
+ if (inv)
+ l = ~l;
+ l &= mask;
+ return l;
+}
+
static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
{
void __iomem *reg = bank->base;
@@ -620,6 +668,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
}
}
+static void _reset_gpio(struct gpio_bank *bank, int gpio)
+{
+ _set_gpio_direction(bank, get_gpio_index(gpio), 1);
+ _set_gpio_irqenable(bank, gpio, 0);
+ _clear_gpio_irqstatus(bank, gpio);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+}
+
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int gpio_wake_enable(unsigned int irq, unsigned int enable)
{
@@ -630,9 +686,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
if (check_gpio(gpio) < 0)
return -ENODEV;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
- spin_unlock(&bank->lock);
return retval;
}
@@ -654,7 +708,9 @@ int omap_request_gpio(int gpio)
}
bank->reserved_map |= (1 << get_gpio_index(gpio));
- /* Set trigger to none. You need to enable the trigger after request_irq */
+ /* Set trigger to none. You need to enable the desired trigger with
+ * request_irq() or set_irq_type().
+ */
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
#ifdef CONFIG_ARCH_OMAP15XX
@@ -714,9 +770,7 @@ void omap_free_gpio(int gpio)
}
#endif
bank->reserved_map &= ~(1 << get_gpio_index(gpio));
- _set_gpio_direction(bank, get_gpio_index(gpio), 1);
- _set_gpio_irqenable(bank, gpio, 0);
- _clear_gpio_irqstatus(bank, gpio);
+ _reset_gpio(bank, gpio);
spin_unlock(&bank->lock);
}
@@ -736,10 +790,12 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
u32 isr;
unsigned int gpio_irq;
struct gpio_bank *bank;
+ u32 retrigger = 0;
+ int unmasked = 0;
desc->chip->ack(irq);
- bank = (struct gpio_bank *) desc->data;
+ bank = get_irq_data(irq);
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
#ifdef CONFIG_ARCH_OMAP15XX
@@ -760,18 +816,22 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
#endif
while(1) {
u32 isr_saved, level_mask = 0;
+ u32 enabled;
- isr_saved = isr = __raw_readl(isr_reg);
+ enabled = _get_gpio_irqbank_mask(bank);
+ isr_saved = isr = __raw_readl(isr_reg) & enabled;
if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
isr &= 0x0000ffff;
- if (cpu_is_omap24xx())
+ if (cpu_is_omap24xx()) {
level_mask =
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT0) |
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
+ level_mask &= enabled;
+ }
/* clear edge sensitive interrupts before handler(s) are
called so that we don't miss any interrupt occurred while
@@ -782,19 +842,55 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
/* if there is only edge sensitive GPIO pin interrupts
configured, we could unmask GPIO bank interrupt immediately */
- if (!level_mask)
+ if (!level_mask && !unmasked) {
+ unmasked = 1;
desc->chip->unmask(irq);
+ }
+ isr |= retrigger;
+ retrigger = 0;
if (!isr)
break;
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
struct irqdesc *d;
+ int irq_mask;
if (!(isr & 1))
continue;
d = irq_desc + gpio_irq;
+ /* Don't run the handler if it's already running
+ * or was disabled lazely.
+ */
+ if (unlikely((d->depth ||
+ (d->status & IRQ_INPROGRESS)))) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ /* The unmasking will be done by
+ * enable_irq in case it is disabled or
+ * after returning from the handler if
+ * it's already running.
+ */
+ _enable_gpio_irqbank(bank, irq_mask, 0);
+ if (!d->depth) {
+ /* Level triggered interrupts
+ * won't ever be reentered
+ */
+ BUG_ON(level_mask & irq_mask);
+ d->status |= IRQ_PENDING;
+ }
+ continue;
+ }
+
desc_handle_irq(gpio_irq, d, regs);
+
+ if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ d->status &= ~IRQ_PENDING;
+ _enable_gpio_irqbank(bank, irq_mask, 1);
+ retrigger |= irq_mask;
+ }
}
if (cpu_is_omap24xx()) {
@@ -804,13 +900,22 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
}
- /* if bank has any level sensitive GPIO pin interrupt
- configured, we must unmask the bank interrupt only after
- handler(s) are executed in order to avoid spurious bank
- interrupt */
- if (level_mask)
- desc->chip->unmask(irq);
}
+ /* if bank has any level sensitive GPIO pin interrupt
+ configured, we must unmask the bank interrupt only after
+ handler(s) are executed in order to avoid spurious bank
+ interrupt */
+ if (!unmasked)
+ desc->chip->unmask(irq);
+
+}
+
+static void gpio_irq_shutdown(unsigned int irq)
+{
+ unsigned int gpio = irq - IH_GPIO_BASE;
+ struct gpio_bank *bank = get_gpio_bank(gpio);
+
+ _reset_gpio(bank, gpio);
}
static void gpio_ack_irq(unsigned int irq)
@@ -859,7 +964,9 @@ static void mpuio_unmask_irq(unsigned int irq)
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irqchip gpio_irq_chip = {
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .shutdown = gpio_irq_shutdown,
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
@@ -867,10 +974,11 @@ static struct irqchip gpio_irq_chip = {
.set_wake = gpio_wake_enable,
};
-static struct irqchip mpuio_irq_chip = {
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
.ack = mpuio_ack_irq,
.mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq
+ .unmask = mpuio_unmask_irq
};
static int initialized;
@@ -898,7 +1006,7 @@ static int __init _omap_gpio_init(void)
else
clk_enable(gpio_ick);
gpio_fck = clk_get(NULL, "gpios_fck");
- if (IS_ERR(gpio_ick))
+ if (IS_ERR(gpio_fck))
printk("Could not get gpios_fck\n");
else
clk_enable(gpio_fck);
@@ -1057,8 +1165,8 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
case METHOD_GPIO_24XX:
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+ wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+ wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
default:
continue;
OpenPOWER on IntegriCloud