diff options
Diffstat (limited to 'arch/arm/mach-pxa/ssp.c')
| -rw-r--r-- | arch/arm/mach-pxa/ssp.c | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c new file mode 100644 index 000000000000..4d826c021315 --- /dev/null +++ b/arch/arm/mach-pxa/ssp.c @@ -0,0 +1,363 @@ +/* + * linux/arch/arm/mach-pxa/ssp.c + * + * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King + * + * Copyright (C) 2003 Russell King. + * Copyright (C) 2003 Wolfson Microelectronics PLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * PXA2xx SSP driver. This provides the generic core for simple + * IO-based SSP applications and allows easy port setup for DMA access. + * + * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * + * Revision history: + * 22nd Aug 2003 Initial version. + * 20th Dec 2004 Added ssp_config for changing port config without + * closing the port. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/arch/ssp.h> +#include <asm/arch/pxa-regs.h> + +#define PXA_SSP_PORTS 3 + +static DECLARE_MUTEX(sem); +static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; + +static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ssp_dev *dev = (struct ssp_dev*) dev_id; + unsigned int status = SSSR_P(dev->port); + + SSSR_P(dev->port) = status; /* clear status bits */ + + if (status & SSSR_ROR) + printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); + + if (status & SSSR_TUR) + printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port); + + if (status & SSSR_BCE) + printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port); + + return IRQ_HANDLED; +} + +/** + * ssp_write_word - write a word to the SSP port + * @data: 32-bit, MSB justified data to write. + * + * Wait for a free entry in the SSP transmit FIFO, and write a data + * word to the SSP port. + * + * The caller is expected to perform the necessary locking. + * + * Returns: + * %-ETIMEDOUT timeout occurred (for future) + * 0 success + */ +int ssp_write_word(struct ssp_dev *dev, u32 data) +{ + while (!(SSSR_P(dev->port) & SSSR_TNF)) + cpu_relax(); + + SSDR_P(dev->port) = data; + + return 0; +} + +/** + * ssp_read_word - read a word from the SSP port + * + * Wait for a data word in the SSP receive FIFO, and return the + * received data. Data is LSB justified. + * + * Note: Currently, if data is not expected to be received, this + * function will wait for ever. + * + * The caller is expected to perform the necessary locking. + * + * Returns: + * %-ETIMEDOUT timeout occurred (for future) + * 32-bit data success + */ +int ssp_read_word(struct ssp_dev *dev) +{ + while (!(SSSR_P(dev->port) & SSSR_RNE)) + cpu_relax(); + + return SSDR_P(dev->port); +} + +/** + * ssp_flush - flush the transmit and receive FIFOs + * + * Wait for the SSP to idle, and ensure that the receive FIFO + * is empty. + * + * The caller is expected to perform the necessary locking. + */ +void ssp_flush(struct ssp_dev *dev) +{ + do { + while (SSSR_P(dev->port) & SSSR_RNE) { + (void) SSDR_P(dev->port); + } + } while (SSSR_P(dev->port) & SSSR_BSY); +} + +/** + * ssp_enable - enable the SSP port + * + * Turn on the SSP port. + */ +void ssp_enable(struct ssp_dev *dev) +{ + SSCR0_P(dev->port) |= SSCR0_SSE; +} + +/** + * ssp_disable - shut down the SSP port + * + * Turn off the SSP port, optionally powering it down. + */ +void ssp_disable(struct ssp_dev *dev) +{ + SSCR0_P(dev->port) &= ~SSCR0_SSE; +} + +/** + * ssp_save_state - save the SSP configuration + * @ssp: pointer to structure to save SSP configuration + * + * Save the configured SSP state for suspend. + */ +void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp) +{ + ssp->cr0 = SSCR0_P(dev->port); + ssp->cr1 = SSCR1_P(dev->port); + ssp->to = SSTO_P(dev->port); + ssp->psp = SSPSP_P(dev->port); + + SSCR0_P(dev->port) &= ~SSCR0_SSE; +} + +/** + * ssp_restore_state - restore a previously saved SSP configuration + * @ssp: pointer to configuration saved by ssp_save_state + * + * Restore the SSP configuration saved previously by ssp_save_state. + */ +void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp) +{ + SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE; + + SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE; + SSCR1_P(dev->port) = ssp->cr1; + SSTO_P(dev->port) = ssp->to; + SSPSP_P(dev->port) = ssp->psp; + + SSCR0_P(dev->port) = ssp->cr0; +} + +/** + * ssp_config - configure SSP port settings + * @mode: port operating mode + * @flags: port config flags + * @psp_flags: port PSP config flags + * @speed: port speed + * + * Port MUST be disabled by ssp_disable before making any config changes. + */ +int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) +{ + dev->mode = mode; + dev->flags = flags; + dev->psp_flags = psp_flags; + dev->speed = speed; + + /* set up port type, speed, port settings */ + SSCR0_P(dev->port) = (dev->speed | dev->mode); + SSCR1_P(dev->port) = dev->flags; + SSPSP_P(dev->port) = dev->psp_flags; + + return 0; +} + +/** + * ssp_init - setup the SSP port + * + * initialise and claim resources for the SSP port. + * + * Returns: + * %-ENODEV if the SSP port is unavailable + * %-EBUSY if the resources are already in use + * %0 on success + */ +int ssp_init(struct ssp_dev *dev, u32 port) +{ + int ret, irq; + + if (port > PXA_SSP_PORTS || port == 0) + return -ENODEV; + + down(&sem); + if (use_count[port - 1]) { + up(&sem); + return -EBUSY; + } + use_count[port - 1]++; + + if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) { + use_count[port - 1]--; + up(&sem); + return -EBUSY; + } + + switch (port) { + case 1: + irq = IRQ_SSP; + break; +#if defined (CONFIG_PXA27x) + case 2: + irq = IRQ_SSP2; + break; + case 3: + irq = IRQ_SSP3; + break; +#else + case 2: + irq = IRQ_NSSP; + break; + case 3: + irq = IRQ_ASSP; + break; +#endif + default: + return -ENODEV; + } + + dev->port = port; + + ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev); + if (ret) + goto out_region; + + /* turn on SSP port clock */ + switch (dev->port) { +#if defined (CONFIG_PXA27x) + case 1: + pxa_set_cken(CKEN23_SSP1, 1); + break; + case 2: + pxa_set_cken(CKEN3_SSP2, 1); + break; + case 3: + pxa_set_cken(CKEN4_SSP3, 1); + break; +#else + case 1: + pxa_set_cken(CKEN3_SSP, 1); + break; + case 2: + pxa_set_cken(CKEN9_NSSP, 1); + break; + case 3: + pxa_set_cken(CKEN10_ASSP, 1); + break; +#endif + } + + up(&sem); + return 0; + +out_region: + release_mem_region(__PREG(SSCR0_P(port)), 0x2c); + use_count[port - 1]--; + up(&sem); + return ret; +} + +/** + * ssp_exit - undo the effects of ssp_init + * + * release and free resources for the SSP port. + */ +void ssp_exit(struct ssp_dev *dev) +{ + int irq; + + down(&sem); + SSCR0_P(dev->port) &= ~SSCR0_SSE; + + /* find irq, save power and turn off SSP port clock */ + switch (dev->port) { +#if defined (CONFIG_PXA27x) + case 1: + irq = IRQ_SSP; + pxa_set_cken(CKEN23_SSP1, 0); + break; + case 2: + irq = IRQ_SSP2; + pxa_set_cken(CKEN3_SSP2, 0); + break; + case 3: + irq = IRQ_SSP3; + pxa_set_cken(CKEN4_SSP3, 0); + break; +#else + case 1: + irq = IRQ_SSP; + pxa_set_cken(CKEN3_SSP, 0); + break; + case 2: + irq = IRQ_NSSP; + pxa_set_cken(CKEN9_NSSP, 0); + break; + case 3: + irq = IRQ_ASSP; + pxa_set_cken(CKEN10_ASSP, 0); + break; +#endif + default: + printk(KERN_WARNING "SSP: tried to close invalid port\n"); + return; + } + + free_irq(irq, dev); + release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); + use_count[dev->port - 1]--; + up(&sem); +} + +EXPORT_SYMBOL(ssp_write_word); +EXPORT_SYMBOL(ssp_read_word); +EXPORT_SYMBOL(ssp_flush); +EXPORT_SYMBOL(ssp_enable); +EXPORT_SYMBOL(ssp_disable); +EXPORT_SYMBOL(ssp_save_state); +EXPORT_SYMBOL(ssp_restore_state); +EXPORT_SYMBOL(ssp_init); +EXPORT_SYMBOL(ssp_exit); +EXPORT_SYMBOL(ssp_config); + +MODULE_DESCRIPTION("PXA SSP driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); + |
