diff options
Diffstat (limited to 'arch/arm/mach-orion5x')
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/board-dt.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/include/mach/irqs.h | 64 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/irq.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/lsmini-setup.c | 280 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/tsx09-common.c | 4 |
8 files changed, 39 insertions, 325 deletions
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2412efb6cdd9..08d2be2ea41f 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL Buffalo Linkstation Live v3 (LS-CHL) platform. config MACH_LINKSTATION_MINI - bool "Buffalo Linkstation Mini" - select I2C_BOARDINFO + bool "Buffalo Linkstation Mini (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - Buffalo Linkstation Mini platform. + Buffalo Linkstation Mini (LS-WSGL) platform. config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index a40b5c9a58c4..a1e0fbe6a7a1 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 79f033b1ddff..d0871786dd8a 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -16,7 +16,6 @@ #include <linux/of_platform.h> #include <linux/cpu.h> #include <linux/mbus.h> -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 09d2a26985da..f267e58a8283 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -236,9 +236,7 @@ static int __init dns323_read_mac_addr(void) } iounmap(mac_page); - printk("DNS-323: Found ethernet MAC address: "); - for (i = 0; i < 6; i++) - printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + printk("DNS-323: Found ethernet MAC address: %pM\n", addr); memcpy(dns323_eth_data.mac_addr, addr, 6); diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h index a6fa9d8f12d8..2431d9923427 100644 --- a/arch/arm/mach-orion5x/include/mach/irqs.h +++ b/arch/arm/mach-orion5x/include/mach/irqs.h @@ -16,42 +16,42 @@ /* * Orion Main Interrupt Controller */ -#define IRQ_ORION5X_BRIDGE 0 -#define IRQ_ORION5X_DOORBELL_H2C 1 -#define IRQ_ORION5X_DOORBELL_C2H 2 -#define IRQ_ORION5X_UART0 3 -#define IRQ_ORION5X_UART1 4 -#define IRQ_ORION5X_I2C 5 -#define IRQ_ORION5X_GPIO_0_7 6 -#define IRQ_ORION5X_GPIO_8_15 7 -#define IRQ_ORION5X_GPIO_16_23 8 -#define IRQ_ORION5X_GPIO_24_31 9 -#define IRQ_ORION5X_PCIE0_ERR 10 -#define IRQ_ORION5X_PCIE0_INT 11 -#define IRQ_ORION5X_USB1_CTRL 12 -#define IRQ_ORION5X_DEV_BUS_ERR 14 -#define IRQ_ORION5X_PCI_ERR 15 -#define IRQ_ORION5X_USB_BR_ERR 16 -#define IRQ_ORION5X_USB0_CTRL 17 -#define IRQ_ORION5X_ETH_RX 18 -#define IRQ_ORION5X_ETH_TX 19 -#define IRQ_ORION5X_ETH_MISC 20 -#define IRQ_ORION5X_ETH_SUM 21 -#define IRQ_ORION5X_ETH_ERR 22 -#define IRQ_ORION5X_IDMA_ERR 23 -#define IRQ_ORION5X_IDMA_0 24 -#define IRQ_ORION5X_IDMA_1 25 -#define IRQ_ORION5X_IDMA_2 26 -#define IRQ_ORION5X_IDMA_3 27 -#define IRQ_ORION5X_CESA 28 -#define IRQ_ORION5X_SATA 29 -#define IRQ_ORION5X_XOR0 30 -#define IRQ_ORION5X_XOR1 31 +#define IRQ_ORION5X_BRIDGE (1 + 0) +#define IRQ_ORION5X_DOORBELL_H2C (1 + 1) +#define IRQ_ORION5X_DOORBELL_C2H (1 + 2) +#define IRQ_ORION5X_UART0 (1 + 3) +#define IRQ_ORION5X_UART1 (1 + 4) +#define IRQ_ORION5X_I2C (1 + 5) +#define IRQ_ORION5X_GPIO_0_7 (1 + 6) +#define IRQ_ORION5X_GPIO_8_15 (1 + 7) +#define IRQ_ORION5X_GPIO_16_23 (1 + 8) +#define IRQ_ORION5X_GPIO_24_31 (1 + 9) +#define IRQ_ORION5X_PCIE0_ERR (1 + 10) +#define IRQ_ORION5X_PCIE0_INT (1 + 11) +#define IRQ_ORION5X_USB1_CTRL (1 + 12) +#define IRQ_ORION5X_DEV_BUS_ERR (1 + 14) +#define IRQ_ORION5X_PCI_ERR (1 + 15) +#define IRQ_ORION5X_USB_BR_ERR (1 + 16) +#define IRQ_ORION5X_USB0_CTRL (1 + 17) +#define IRQ_ORION5X_ETH_RX (1 + 18) +#define IRQ_ORION5X_ETH_TX (1 + 19) +#define IRQ_ORION5X_ETH_MISC (1 + 20) +#define IRQ_ORION5X_ETH_SUM (1 + 21) +#define IRQ_ORION5X_ETH_ERR (1 + 22) +#define IRQ_ORION5X_IDMA_ERR (1 + 23) +#define IRQ_ORION5X_IDMA_0 (1 + 24) +#define IRQ_ORION5X_IDMA_1 (1 + 25) +#define IRQ_ORION5X_IDMA_2 (1 + 26) +#define IRQ_ORION5X_IDMA_3 (1 + 27) +#define IRQ_ORION5X_CESA (1 + 28) +#define IRQ_ORION5X_SATA (1 + 29) +#define IRQ_ORION5X_XOR0 (1 + 30) +#define IRQ_ORION5X_XOR1 (1 + 31) /* * Orion General Purpose Pins */ -#define IRQ_ORION5X_GPIO_START 32 +#define IRQ_ORION5X_GPIO_START 33 #define NR_GPIO_IRQS 32 #define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index cd4bac4d7e43..086ecb87d885 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -42,7 +42,7 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) stat = readl_relaxed(MAIN_IRQ_CAUSE); stat &= readl_relaxed(MAIN_IRQ_MASK); if (stat) { - unsigned int hwirq = __fls(stat); + unsigned int hwirq = 1 + __fls(stat); handle_IRQ(hwirq, regs); return; } @@ -51,7 +51,7 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) void __init orion5x_init_irq(void) { - orion_irq_init(0, MAIN_IRQ_MASK); + orion_irq_init(1, MAIN_IRQ_MASK); #ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq(orion5x_legacy_handle_irq); diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c deleted file mode 100644 index a6493e76f96d..000000000000 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * arch/arm/mach-orion5x/lsmini-setup.c - * - * Maintainer: Alexey Kopytko <alexey@kopytko.ru> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * Linkstation Mini Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define LSMINI_NOR_BOOT_BASE 0xf4000000 -#define LSMINI_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data lsmini_nor_flash_data = { - .width = 1, -}; - -static struct resource lsmini_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = LSMINI_NOR_BOOT_BASE, - .end = LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device lsmini_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &lsmini_nor_flash_data, - }, - .num_resources = 1, - .resource = &lsmini_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data lsmini_eth_data = { - .phy_addr = 8, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -static struct i2c_board_info __initdata lsmini_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - -/***************************************************************************** - * LEDs attached to GPIO - ****************************************************************************/ - -#define LSMINI_GPIO_LED_ALARM 2 -#define LSMINI_GPIO_LED_INFO 3 -#define LSMINI_GPIO_LED_FUNC 9 -#define LSMINI_GPIO_LED_PWR 14 - -static struct gpio_led lsmini_led_pins[] = { - { - .name = "alarm:red", - .gpio = LSMINI_GPIO_LED_ALARM, - .active_low = 1, - }, { - .name = "info:amber", - .gpio = LSMINI_GPIO_LED_INFO, - .active_low = 1, - }, { - .name = "func:blue:top", - .gpio = LSMINI_GPIO_LED_FUNC, - .active_low = 1, - }, { - .name = "power:blue:bottom", - .gpio = LSMINI_GPIO_LED_PWR, - }, -}; - -static struct gpio_led_platform_data lsmini_led_data = { - .leds = lsmini_led_pins, - .num_leds = ARRAY_SIZE(lsmini_led_pins), -}; - -static struct platform_device lsmini_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &lsmini_led_data, - }, -}; - -/**************************************************************************** - * GPIO Attached Keys - ****************************************************************************/ - -#define LSMINI_GPIO_KEY_FUNC 15 -#define LSMINI_GPIO_KEY_POWER 18 -#define LSMINI_GPIO_KEY_AUTOPOWER 17 - -#define LSMINI_SW_POWER 0x00 -#define LSMINI_SW_AUTOPOWER 0x01 - -static struct gpio_keys_button lsmini_buttons[] = { - { - .code = KEY_OPTION, - .gpio = LSMINI_GPIO_KEY_FUNC, - .desc = "Function Button", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSMINI_SW_POWER, - .gpio = LSMINI_GPIO_KEY_POWER, - .desc = "Power-on Switch", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSMINI_SW_AUTOPOWER, - .gpio = LSMINI_GPIO_KEY_AUTOPOWER, - .desc = "Power-auto Switch", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data lsmini_button_data = { - .buttons = lsmini_buttons, - .nbuttons = ARRAY_SIZE(lsmini_buttons), -}; - -static struct platform_device lsmini_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsmini_button_data, - }, -}; - - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data lsmini_sata_data = { - .n_ports = 2, -}; - - -/***************************************************************************** - * Linkstation Mini specific power off method: reboot - ****************************************************************************/ -/* - * On the Linkstation Mini, the shutdown process is following: - * - Userland monitors key events until the power switch goes to off position - * - The board reboots - * - U-boot starts and goes into an idle mode waiting for the user - * to move the switch to ON position - */ - -static void lsmini_power_off(void) -{ - orion5x_restart(REBOOT_HARD, NULL); -} - - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -#define LSMINI_GPIO_USB_POWER 16 -#define LSMINI_GPIO_AUTO_POWER 17 -#define LSMINI_GPIO_POWER 18 - -#define LSMINI_GPIO_HDD_POWER0 1 -#define LSMINI_GPIO_HDD_POWER1 19 - -static unsigned int lsmini_mpp_modes[] __initdata = { - MPP0_UNUSED, /* LED_RESERVE1 (unused) */ - MPP1_GPIO, /* HDD_PWR */ - MPP2_GPIO, /* LED_ALARM */ - MPP3_GPIO, /* LED_INFO */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_GPIO, /* LED_FUNC */ - MPP10_UNUSED, - MPP11_UNUSED, /* LED_ETH (dummy) */ - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_GPIO, /* LED_PWR */ - MPP15_GPIO, /* FUNC */ - MPP16_GPIO, /* USB_PWR */ - MPP17_GPIO, /* AUTO_POWER */ - MPP18_GPIO, /* POWER */ - MPP19_GPIO, /* HDD_PWR1 */ - 0, -}; - -static void __init lsmini_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(lsmini_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&lsmini_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&lsmini_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - LSMINI_NOR_BOOT_BASE, - LSMINI_NOR_BOOT_SIZE); - platform_device_register(&lsmini_nor_flash); - - platform_device_register(&lsmini_button_device); - - platform_device_register(&lsmini_leds); - - i2c_register_board_info(0, &lsmini_i2c_rtc, 1); - - /* enable USB power */ - gpio_set_value(LSMINI_GPIO_USB_POWER, 1); - - /* register power-off method */ - pm_power_off = lsmini_power_off; - - pr_info("%s: finished\n", __func__); -} - -#ifdef CONFIG_MACH_LINKSTATION_MINI -MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") - /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */ - .atag_offset = 0x100, - .init_machine = lsmini_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index 7189827d641d..24b2959719fa 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -101,9 +101,7 @@ static int __init qnap_tsx09_check_mac_addr(const char *addr_str) addr[i] = byte; } - printk(KERN_INFO "tsx09: found ethernet mac address "); - for (i = 0; i < 6; i++) - printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6); |
