diff options
Diffstat (limited to 'arch/arm/mach-omap2')
32 files changed, 8 insertions, 2195 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6ab656cc4f16..2b8e47788062 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -217,12 +217,6 @@ config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 default y - select OMAP_PACKAGE_CBB - -config MACH_CRANEBOARD - bool "AM3517/05 CRANE board" - depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" @@ -263,12 +257,6 @@ config MACH_CM_T35 select MACH_CM_T3730 select OMAP_PACKAGE_CUS -config MACH_CM_T3517 - bool "CompuLab CM-T3517 module" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_CM_T3730 bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 3a6463f88ea2..fb78744f546b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -182,7 +182,6 @@ obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o @@ -251,13 +250,8 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o -obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o -obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o - -obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o - obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o # Platform specific device init code @@ -287,7 +281,4 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),) obj-y += hwspinlock.o endif -emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o -obj-y += $(emac-m) $(emac-y) - obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c deleted file mode 100644 index 6a6935caac1e..000000000000 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (C) 2011 Ilya Yanok, Emcraft Systems - * - * Based on mach-omap2/board-am3517evm.c - * Copyright (C) 2009 Texas Instruments Incorporated - * Author: Ranjith Lohithakshan <ranjithl@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/err.h> -#include <linux/davinci_emac.h> -#include "omap_device.h" -#include "am35xx.h" -#include "control.h" -#include "am35xx-emac.h" - -static void am35xx_enable_emac_int(void) -{ - u32 v; - - v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); - omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ -} - -static void am35xx_disable_emac_int(void) -{ - u32 v; - - v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); - omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ -} - -static struct emac_platform_data am35xx_emac_pdata = { - .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET, - .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET, - .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET, - .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE, - .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR, - .version = EMAC_VERSION_2, - .interrupt_enable = am35xx_enable_emac_int, - .interrupt_disable = am35xx_disable_emac_int, -}; - -static struct mdio_platform_data am35xx_mdio_pdata; - -static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, - void *pdata, int pdata_len) -{ - struct platform_device *pdev; - - pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len); - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - oh->class->name, oh->name); - return PTR_ERR(pdev); - } - - return 0; -} - -void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) -{ - struct omap_hwmod *oh; - u32 v; - int ret; - - oh = omap_hwmod_lookup("davinci_mdio"); - if (!oh) { - pr_err("Could not find davinci_mdio hwmod\n"); - return; - } - - am35xx_mdio_pdata.bus_freq = mdio_bus_freq; - - ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, - sizeof(am35xx_mdio_pdata)); - if (ret) { - pr_err("Could not build davinci_mdio hwmod device\n"); - return; - } - - oh = omap_hwmod_lookup("davinci_emac"); - if (!oh) { - pr_err("Could not find davinci_emac hwmod\n"); - return; - } - - am35xx_emac_pdata.rmii_en = rmii_en; - - ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, - sizeof(am35xx_emac_pdata)); - if (ret) { - pr_err("Could not build davinci_emac hwmod device\n"); - return; - } - - v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - v &= ~AM35XX_CPGMACSS_SW_RST; - omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); - omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ -} diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h deleted file mode 100644 index 15c6f9ce59a2..000000000000 --- a/arch/arm/mach-omap2/am35xx-emac.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2011 Ilya Yanok, Emcraft Systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 - -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) -void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en); -#else -static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {} -#endif diff --git a/arch/arm/mach-omap2/am35xx.h b/arch/arm/mach-omap2/am35xx.h deleted file mode 100644 index 95594495fcf6..000000000000 --- a/arch/arm/mach-omap2/am35xx.h +++ /dev/null @@ -1,46 +0,0 @@ -/*: - * Address mappings and base address for AM35XX specific interconnects - * and peripherals. - * - * Copyright (C) 2009 Texas Instruments - * - * Author: Sriramakrishnan <srk@ti.com> - * Vaibhav Hiremath <hvaibhav@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_AM35XX_H -#define __ASM_ARCH_AM35XX_H - -/* - * Base addresses - * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules - */ -#define AM35XX_IPSS_EMAC_BASE 0x5C000000 -#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000 -#define AM35XX_IPSS_HECC_BASE 0x5C050000 -#define AM35XX_IPSS_VPFE_BASE 0x5C060000 - - -/* HECC module specifc offset definitions */ -#define AM35XX_HECC_SCC_HECC_OFFSET (0x0) -#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000) -#define AM35XX_HECC_RAM_OFFSET (0x3000) -#define AM35XX_HECC_MBOX_OFFSET (0x2000) -#define AM35XX_HECC_INT_LINE (0x0) -#define AM35XX_HECC_VERSION (0x1) - -#define AM35XX_EMAC_CNTRL_OFFSET (0x10000) -#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) -#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) -#define AM35XX_EMAC_MDIO_OFFSET (0x30000) -#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ - AM35XX_EMAC_MDIO_OFFSET) -#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) -#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ - AM3517_EMAC_CNTRL_RAM_OFFSET) -#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000) - -#endif /* __ASM_ARCH_AM35XX_H */ diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c deleted file mode 100644 index 8168ddabaeda..000000000000 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Support for AM3517/05 Craneboard - * http://www.mistralsolutions.com/products/craneboard.php - * - * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com> - * Author: R.Srinath <srinath@mistralsolutions.com> - * - * Based on mach-omap2/board-am3517evm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/mfd/tps65910.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/omap-gpmc.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "common-board-devices.h" -#include "board-flash.h" - -#include "am35xx-emac.h" -#include "mux.h" -#include "control.h" - -#define GPIO_USB_POWER 35 -#define GPIO_USB_NRESET 38 - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = GPIO_USB_NRESET, - .vcc_gpio = GPIO_USB_POWER, - .vcc_polarity = 1, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static struct mtd_partition crane_nand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 14 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 40 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct tps65910_board tps65910_pdata = { - .irq = 7 + OMAP_INTC_START, - .en_ck32k_xtal = true, -}; - -static struct i2c_board_info __initdata tps65910_board_info[] = { - { - I2C_BOARD_INFO("tps65910", 0x2d), - .platform_data = &tps65910_pdata, - }, -}; - -static void __init am3517_crane_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, tps65910_board_info, - ARRAY_SIZE(tps65910_board_info)); -} - -static void __init am3517_crane_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - board_nand_init(crane_nand_partitions, - ARRAY_SIZE(crane_nand_partitions), 0, - NAND_BUSWIDTH_16, NULL); - am3517_crane_i2c_init(); - - /* Configure GPIO for EHCI port */ - if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { - pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", - GPIO_USB_NRESET); - return; - } - - if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) { - pr_err("Can not configure mux for GPIO_USB_POWER %d\n", - GPIO_USB_POWER); - return; - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); -} - -MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = am3517_crane_init, - .init_late = am35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c deleted file mode 100644 index 1c091b3fa312..000000000000 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ /dev/null @@ -1,373 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-am3517evm.c - * - * Copyright (C) 2009 Texas Instruments Incorporated - * Author: Ranjith Lohithakshan <ranjithl@ti.com> - * - * Based on mach-omap2/board-omap3evm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/platform_data/pca953x.h> -#include <linux/can/platform/ti_hecc.h> -#include <linux/davinci_emac.h> -#include <linux/mmc/host.h> -#include <linux/usb/musb.h> -#include <linux/platform_data/gpio-omap.h> - -#include "am35xx.h" -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "am35xx-emac.h" -#include "mux.h" -#include "control.h" -#include "hsmmc.h" - -#define LCD_PANEL_PWR 176 -#define LCD_PANEL_BKLIGHT_PWR 182 -#define LCD_PANEL_PWM 181 - -static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("s35390a", 0x30), - }, -}; - -/* - * RTC - S35390A - */ -#define GPIO_RTCS35390A_IRQ 55 - -static void __init am3517_evm_rtc_init(void) -{ - int r; - - omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - - r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); - if (r < 0) { - printk(KERN_WARNING "failed to request GPIO#%d\n", - GPIO_RTCS35390A_IRQ); - return; - } - - am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); -} - -/* - * I2C GPIO Expander - TCA6416 - */ - -/* Mounted on Base-Board */ -static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = { - .gpio_base = OMAP_MAX_GPIO_LINES, -}; -static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1A), - }, - { - I2C_BOARD_INFO("tca6416", 0x21), - .platform_data = &am3517evm_gpio_expander_info_0, - }, -}; - -/* Mounted on UI Card */ -static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = { - .gpio_base = OMAP_MAX_GPIO_LINES + 16, -}; -static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = { - .gpio_base = OMAP_MAX_GPIO_LINES + 32, -}; -static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = { - { - I2C_BOARD_INFO("tca6416", 0x20), - .platform_data = &am3517evm_ui_gpio_expander_info_1, - }, - { - I2C_BOARD_INFO("tca6416", 0x21), - .platform_data = &am3517evm_ui_gpio_expander_info_2, - }, -}; - -static int __init am3517_evm_i2c_init(void) -{ - omap_register_i2c_bus(1, 400, NULL, 0); - omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo, - ARRAY_SIZE(am3517evm_i2c2_boardinfo)); - omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo, - ARRAY_SIZE(am3517evm_i2c3_boardinfo)); - - return 0; -} - -static const struct display_timing am3517_evm_lcd_videomode = { - .pixelclock = { 0, 9000000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 3, 0 }, - .hback_porch = { 0, 2, 0 }, - .hsync_len = { 0, 42, 0 }, - - .vactive = { 0, 272, 0 }, - .vfront_porch = { 0, 3, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 11, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data am3517_evm_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 16, - - .display_timing = &am3517_evm_lcd_videomode, - - .enable_gpio = LCD_PANEL_PWR, - .backlight_gpio = LCD_PANEL_BKLIGHT_PWR, -}; - -static struct platform_device am3517_evm_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &am3517_evm_lcd_pdata, -}; - -static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device am3517_evm_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &am3517_evm_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device am3517_evm_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &am3517_evm_tfp410_pdata, -}; - -static struct connector_atv_platform_data am3517_evm_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device am3517_evm_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &am3517_evm_tv_pdata, -}; - -static struct omap_dss_board_info am3517_evm_dss_data = { - .default_display_name = "lcd", -}; - -static void __init am3517_evm_display_init(void) -{ - gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm"); - - omap_display_init(&am3517_evm_dss_data); - - platform_device_register(&am3517_evm_tfp410_device); - platform_device_register(&am3517_evm_dvi_connector_device); - platform_device_register(&am3517_evm_lcd_device); - platform_device_register(&am3517_evm_tv_connector_device); -} - -/* - * Board initialization - */ - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 500, - .set_phy_power = am35x_musb_phy_power, - .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_set_mode, - .reset = am35x_musb_reset, -}; - -static __init void am3517_evm_musb_init(void) -{ - u32 devconf2; - - /* - * Set up USB clock/mode in the DEVCONF2 register. - */ - devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); - - /* USB2.0 PHY reference clock is 13 MHz */ - devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE); - devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN - | CONF2_DATPOL; - - omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); - - usb_musb_init(&musb_board_data); -} - -static __init void am3517_evm_mcbsp1_init(void) -{ - u32 devconf0; - - /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ - devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; - omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = 57, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* USB OTG DRVVBUS offset = 0x212 */ - OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - - -static struct resource am3517_hecc_resources[] = { - { - .start = AM35XX_IPSS_HECC_BASE, - .end = AM35XX_IPSS_HECC_BASE + 0x3FFF, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am3517_hecc_device = { - .name = "ti_hecc", - .id = -1, - .num_resources = ARRAY_SIZE(am3517_hecc_resources), - .resource = am3517_hecc_resources, -}; - -static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { - .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, - .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, - .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, - .mbx_offset = AM35XX_HECC_MBOX_OFFSET, - .int_line = AM35XX_HECC_INT_LINE, - .version = AM35XX_HECC_VERSION, -}; - -static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) -{ - am3517_hecc_device.dev.platform_data = pdata; - platform_device_register(&am3517_hecc_device); -} - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 127, - .gpio_wp = 126, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 128, - .gpio_wp = 129, - }, - {} /* Terminator */ -}; - -static void __init am3517_evm_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - am3517_evm_i2c_init(); - - am3517_evm_display_init(); - - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - - /* Configure GPIO for EHCI port */ - omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - am3517_evm_hecc_init(&am3517_evm_hecc_pdata); - - /* RTC - S35390A */ - am3517_evm_rtc_init(); - - i2c_register_board_info(1, am3517evm_i2c1_boardinfo, - ARRAY_SIZE(am3517evm_i2c1_boardinfo)); - /*Ethernet*/ - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); - - /* MUSB */ - am3517_evm_musb_init(); - - /* McBSP1 */ - am3517_evm_mcbsp1_init(); - - /* MMC init function */ - omap_hsmmc_init(mmc); -} - -MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = am3517_evm_init, - .init_late = am35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c deleted file mode 100644 index 794756df8529..000000000000 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-cm-t3517.c - * - * Support for the CompuLab CM-T3517 modules - * - * Copyright (C) 2010 CompuLab, Ltd. - * Author: Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/omap-gpmc.h> -#include <linux/rtc-v3020.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/mmc/host.h> -#include <linux/can/platform/ti_hecc.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "am35xx.h" - -#include "mux.h" -#include "control.h" -#include "hsmmc.h" -#include "common-board-devices.h" -#include "am35xx-emac.h" - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led cm_t3517_leds[] = { - [0] = { - .gpio = 186, - .name = "cm-t3517:green", - .default_trigger = "heartbeat", - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data cm_t3517_led_pdata = { - .num_leds = ARRAY_SIZE(cm_t3517_leds), - .leds = cm_t3517_leds, -}; - -static struct platform_device cm_t3517_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cm_t3517_led_pdata, - }, -}; - -static void __init cm_t3517_init_leds(void) -{ - platform_device_register(&cm_t3517_led_device); -} -#else -static inline void cm_t3517_init_leds(void) {} -#endif - -#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE) -static struct resource cm_t3517_hecc_resources[] = { - { - .start = AM35XX_IPSS_HECC_BASE, - .end = AM35XX_IPSS_HECC_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ti_hecc_platform_data cm_t3517_hecc_pdata = { - .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, - .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, - .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, - .mbx_offset = AM35XX_HECC_MBOX_OFFSET, - .int_line = AM35XX_HECC_INT_LINE, - .version = AM35XX_HECC_VERSION, -}; - -static struct platform_device cm_t3517_hecc_device = { - .name = "ti_hecc", - .id = 1, - .num_resources = ARRAY_SIZE(cm_t3517_hecc_resources), - .resource = cm_t3517_hecc_resources, - .dev = { - .platform_data = &cm_t3517_hecc_pdata, - }, -}; - -static void cm_t3517_init_hecc(void) -{ - platform_device_register(&cm_t3517_hecc_device); -} -#else -static inline void cm_t3517_init_hecc(void) {} -#endif - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static struct omap2_hsmmc_info cm_t3517_mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 144, - .gpio_wp = 59, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; -#else -#define cm_t3517_mmc NULL -#endif - -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -#define RTC_IO_GPIO (153) -#define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (53) -#define RTC_CS_GPIO (163) -#define RTC_CS_EN_GPIO (160) - -struct v3020_platform_data cm_t3517_v3020_pdata = { - .use_gpio = 1, - .gpio_cs = RTC_CS_GPIO, - .gpio_wr = RTC_WR_GPIO, - .gpio_rd = RTC_RD_GPIO, - .gpio_io = RTC_IO_GPIO, -}; - -static struct platform_device cm_t3517_rtc_device = { - .name = "v3020", - .id = -1, - .dev = { - .platform_data = &cm_t3517_v3020_pdata, - } -}; - -static void __init cm_t3517_init_rtc(void) -{ - int err; - - err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, - "rtc cs en"); - if (err) { - pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); - return; - } - - platform_device_register(&cm_t3517_rtc_device); -} -#else -static inline void cm_t3517_init_rtc(void) {} -#endif - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) -#define HSUSB1_RESET_GPIO (146) -#define HSUSB2_RESET_GPIO (147) -#define USB_HUB_RESET_GPIO (152) - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = HSUSB1_RESET_GPIO, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = HSUSB2_RESET_GPIO, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static int __init cm_t3517_init_usbh(void) -{ - int err; - - err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, - "usb hub rst"); - if (err) { - pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); - } else { - udelay(10); - gpio_set_value(USB_HUB_RESET_GPIO, 1); - msleep(1); - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&cm_t3517_ehci_pdata); - - return 0; -} -#else -static inline int cm_t3517_init_usbh(void) -{ - return 0; -} -#endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct mtd_partition cm_t3517_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data cm_t3517_nand_data = { - .parts = cm_t3517_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), - .cs = 0, -}; - -static void __init cm_t3517_init_nand(void) -{ - if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) - pr_err("CM-T3517: NAND initialization failed\n"); -} -#else -static inline void cm_t3517_init_nand(void) {} -#endif - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* GPIO186 - Green LED */ - OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* RTC GPIOs: */ - /* IO - GPIO153 */ - OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* WR# - GPIO154 */ - OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* RD# - GPIO53 */ - OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS# - GPIO163 */ - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS EN - GPIO160 */ - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* HSUSB1 RESET */ - OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* HSUSB2 RESET */ - OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* CM-T3517 USB HUB nRESET */ - OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */ - OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init cm_t3517_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - cm_t3517_init_leds(); - cm_t3517_init_nand(); - cm_t3517_init_rtc(); - cm_t3517_init_usbh(); - cm_t3517_init_hecc(); - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); - omap_hsmmc_init(cm_t3517_mmc); -} - -MACHINE_START(CM_T3517, "Compulab CM-T3517") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t3517_init, - .init_late = am35xx_init_late, - .init_time = omap3_gptimer_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 644ff3231bb8..e79c80bbc755 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3634,10 +3634,6 @@ int __init omap3xxx_clk_init(void) omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); - } else if (soc_is_am33xx()) { - cpu_mask = RATE_IN_AM33XX; - } else if (cpu_is_ti814x()) { - cpu_mask = RATE_IN_TI814X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3681,7 +3677,7 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0)) + if (omap_rev() >= OMAP3430_REV_ES2_0) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c deleted file mode 100644 index c78e893eba7d..000000000000 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * OMAP2xxx APLL clock control functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - - -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx.h" -#include "cm-regbits-24xx.h" - -/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ -#define EN_APLL_STOPPED 0 -#define EN_APLL_LOCKED 3 - -/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ -#define APLLS_CLKIN_19_2MHZ 0 -#define APLLS_CLKIN_13MHZ 2 -#define APLLS_CLKIN_12MHZ 3 - -/* Private functions */ - -/** - * omap2xxx_clk_apll_locked - is the APLL locked? - * @hw: struct clk_hw * of the APLL to check - * - * If the APLL IP block referred to by @hw indicates that it's locked, - * return true; otherwise, return false. - */ -static bool omap2xxx_clk_apll_locked(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 r, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - r = omap2xxx_cm_get_pll_status(); - - return ((r & apll_mask) == apll_mask) ? true : false; -} - -int omap2_clk_apll96_enable(struct clk_hw *hw) -{ - return omap2xxx_cm_apll96_enable(); -} - -int omap2_clk_apll54_enable(struct clk_hw *hw) -{ - return omap2xxx_cm_apll54_enable(); -} - -static void _apll96_allow_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll96_auto_low_power_stop(); -} - -static void _apll96_deny_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll96_disable_autoidle(); -} - -static void _apll54_allow_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll54_auto_low_power_stop(); -} - -static void _apll54_deny_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll54_disable_autoidle(); -} - -void omap2_clk_apll96_disable(struct clk_hw *hw) -{ - omap2xxx_cm_apll96_disable(); -} - -void omap2_clk_apll54_disable(struct clk_hw *hw) -{ - omap2xxx_cm_apll54_disable(); -} - -unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - return (omap2xxx_clk_apll_locked(hw)) ? 54000000 : 0; -} - -unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - return (omap2xxx_clk_apll_locked(hw)) ? 96000000 : 0; -} - -/* Public data */ -const struct clk_hw_omap_ops clkhwops_apll54 = { - .allow_idle = _apll54_allow_idle, - .deny_idle = _apll54_deny_idle, -}; - -const struct clk_hw_omap_ops clkhwops_apll96 = { - .allow_idle = _apll96_allow_idle, - .deny_idle = _apll96_deny_idle, -}; - -/* Public functions */ - -u32 omap2xxx_get_apll_clkin(void) -{ - u32 aplls, srate = 0; - - aplls = omap2xxx_cm_get_pll_config(); - aplls &= OMAP24XX_APLLS_CLKIN_MASK; - aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; - - if (aplls == APLLS_CLKIN_19_2MHZ) - srate = 19200000; - else if (aplls == APLLS_CLKIN_13MHZ) - srate = 13000000; - else if (aplls == APLLS_CLKIN_12MHZ) - srate = 12000000; - - return srate; -} - diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index a4282e79143e..1cf9dd85248a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -177,7 +177,6 @@ struct clksel { u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); void omap3_dpll_allow_idle(struct clk_hw_omap *clk); void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index a090225ceeba..125c37614848 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -22,12 +22,7 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); -unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, - unsigned long parent_rate); -unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw, - unsigned long parent_rate); unsigned long omap2xxx_clk_get_core_rate(void); -u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); void omap2xxx_clkt_vps_check_bootloader_rates(void); @@ -46,11 +41,5 @@ int omap2430_clk_init(void); #endif extern struct clk_hw *dclk_hw; -int omap2_enable_osc_ck(struct clk_hw *hw); -void omap2_disable_osc_ck(struct clk_hw *hw); -int omap2_clk_apll96_enable(struct clk_hw *hw); -int omap2_clk_apll54_enable(struct clk_hw *hw); -void omap2_clk_apll96_disable(struct clk_hw *hw); -void omap2_clk_apll54_disable(struct clk_hw *hw); #endif diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index a96d901b1d5d..ef62ac9dcd05 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -370,16 +370,6 @@ u32 omap2xxx_cm_get_core_pll_config(void) return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); } -u32 omap2xxx_cm_get_pll_config(void) -{ - return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); -} - -u32 omap2xxx_cm_get_pll_status(void) -{ - return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); -} - void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) { u32 tmp; diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index c89502b168ae..83b6c597b0e1 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -60,8 +60,6 @@ extern int omap2xxx_cm_fclks_active(void); extern int omap2xxx_cm_mpu_retention_allowed(void); extern u32 omap2xxx_cm_get_core_clk_src(void); extern u32 omap2xxx_cm_get_core_pll_config(void); -extern u32 omap2xxx_cm_get_pll_config(void); -extern u32 omap2xxx_cm_get_pll_status(void); extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm); diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b9ad463a368a..cc5aac784278 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -72,27 +72,6 @@ static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) return v; } -static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx) -{ - return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx); -} - -static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx) -{ - return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); -} - -static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) -{ - u32 v; - - v = am33xx_cm_read_reg(inst, idx); - v &= mask; - v >>= __ffs(mask); - - return v; -} - /** * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield * @inst: CM instance register offset (*_INST macro) diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 0e58e5a85d53..fc712240e5fd 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -36,26 +36,6 @@ /* Static rate multiplier for OMAP4 REGM4XEN clocks */ #define OMAP4430_REGM4XEN_MULT 4 -/* Supported only on OMAP4 */ -int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return -EINVAL; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= mask; - v >>= __ffs(mask); - - return v; -} - void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk) { u32 v; diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 6a3be2bebddb..a1ee8066958e 100644 --- a/arch/arm/mach-omap2/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -86,200 +86,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) return 0; } -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t) -{ - if (!req_dev || !dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the device to a - * powerdomain, then go through the list of current max lat - * constraints on that powerdomain and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. Conceivably, this code should also determine - * whether to actually disable the device clocks or not, - * depending on how long it takes to re-enable the clocks. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_max_sdma_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux PM QOS params, this code should scan the - * list of maximum CPU and DMA latencies and select the - * smallest, then set cpu_dma_latency pm_qos_param - * accordingly. - * - * For future Linux PM QOS params, with separate CPU and DMA - * latency params, this code should just set the dma_latency param. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) -{ - if (!dev || !c || r < 0) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", - dev_name(dev), r); - - /* - * Code in a real implementation should keep track of these - * constraints on the clock, and determine the highest minimum - * clock rate. It should iterate over each OPP and determine - * whether the OPP will result in a clock rate that would - * satisfy this constraint (and any other PM constraint in effect - * at that time). Once it finds the lowest-voltage OPP that - * meets those conditions, it should switch to it, or return - * an error if the code is not capable of doing so. - */ - - return 0; -} - /* * DSP Bridge-specific constraints */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void) -{ - pr_debug("OMAP PM: DSP request for OPP table\n"); - - /* - * Return DSP frequency table here: The final item in the - * array should have .rate = .opp_id = 0. - */ - - return NULL; -} - -void omap_pm_dsp_set_min_opp(u8 opp_id) -{ - if (opp_id == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); - - /* - * - * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we - * can just test to see which is higher, the CPU's desired OPP - * ID or the DSP's desired OPP ID, and use whichever is - * highest. - * - * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP - * rate is keyed on MPU speed, not the OPP ID. So we need to - * map the OPP ID to the MPU speed for use with clk_set_rate() - * if it is higher than the current OPP clock rate. - * - */ -} - - -u8 omap_pm_dsp_get_opp(void) -{ - pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); - - /* - * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock - * - * CDP12.14+: - * Call clk_get_rate() on the OPP custom clock, map that to an - * OPP ID using the tables defined in board-*.c/chip-*.c files. - */ - - return 0; -} - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) -{ - pr_debug("OMAP PM: CPUFreq request for frequency table\n"); - - /* - * Return CPUFreq frequency table here: loop over - * all VDD1 clkrates, pull out the mpu_ck frequencies, build - * table - */ - - return NULL; -} - -void omap_pm_cpu_set_freq(unsigned long f) -{ - if (f == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", - f); - - /* - * For l-o dev tree, determine whether MPU freq or DSP OPP id - * freq is higher. Find the OPP ID corresponding to the - * higher frequency. Call clk_round_rate() and clk_set_rate() - * on the OPP custom clock. - * - * CDP should just be able to set the VDD1 OPP clock rate here. - */ -} - -unsigned long omap_pm_cpu_get_freq(void) -{ - pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); - - /* - * Call clk_get_rate() on the mpu_ck. - */ - - return 0; -} /** * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled @@ -363,9 +173,3 @@ int __init omap_pm_if_init(void) { return 0; } - -void omap_pm_if_exit(void) -{ - /* Deallocate CPUFreq frequency table here */ -} - diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 1d777e63e05c..109bef5538eb 100644 --- a/arch/arm/mach-omap2/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h @@ -50,14 +50,6 @@ int __init omap_pm_if_early_init(void); */ int __init omap_pm_if_init(void); -/** - * omap_pm_if_exit - OMAP PM exit code - * - * Exit code; currently unused. The "_if_" is to avoid name - * collisions with the PM idle-loop code. - */ -void omap_pm_if_exit(void); - /* * Device-driver-originated constraints (via board-*.c files, platform_data) */ @@ -132,163 +124,6 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); -/** - * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @req_dev: struct device * requesting the constraint, or NULL if none - * @dev: struct device * to set the constraint one - * @t: maximum device wakeup latency in microseconds - * - * Request that the maximum amount of time necessary for a device @dev - * to become accessible after its clocks are enabled should be no - * greater than @t microseconds. Specifically, this represents the - * time from when a device driver enables device clocks with - * clk_enable(), to when the register reads and writes on the device - * will succeed. This function should be called before clk_disable() - * is called, since the power state transition decision may be made - * during clk_disable(). - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the powerdomain enclosing this - * device into. - * - * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the - * wakeup latency restriction for this device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t); - - -/** - * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency - * @dev: struct device * - * @t: maximum DMA transfer start latency in microseconds - * - * Request that the maximum system DMA transfer start latency for this - * device 'dev' should be no greater than 't' microseconds. "DMA - * transfer start latency" here is defined as the elapsed time from - * when a device (e.g., McBSP) requests that a system DMA transfer - * start or continue, to the time at which data starts to flow into - * that device from the system DMA controller. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the CORE powerdomain into. - * - * Since system DMA transfers may not involve the MPU, this function - * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do - * so. Similarly, this function will not affect device wakeup latency - * -- use set_max_dev_wakeup_lat() to affect that. - * - * Multiple calls to set_max_sdma_lat() will replace the previous t - * value for this device. To remove the maximum DMA latency for this - * device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_sdma_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev - * @dev: struct device * requesting the constraint - * @clk: struct clk * to set the minimum rate constraint on - * @r: minimum rate in Hz - * - * Request that the minimum clock rate on the device @dev's clk @clk - * be no less than @r Hz. - * - * It is expected that the OMAP PM code will use this information to - * find an OPP or clock setting that will satisfy this clock rate - * constraint, along with any other applicable system constraints on - * the clock rate or corresponding voltage, etc. - * - * omap_pm_set_min_clk_rate() differs from the clock code's - * clk_set_rate() in that it considers other constraints before taking - * any hardware action, and may change a system OPP rather than just a - * clock rate. clk_set_rate() is intended to be a low-level - * interface. - * - * omap_pm_set_min_clk_rate() is easily open to abuse. A better API - * would be something like "omap_pm_set_min_dev_performance()"; - * however, there is no easily-generalizable concept of performance - * that applies to all devices. Only a device (and possibly the - * device subsystem) has both the subsystem-specific knowledge, and - * the hardware IP block-specific knowledge, to translate a constraint - * on "touchscreen sampling accuracy" or "number of pixels or polygons - * rendered per second" to a clock rate. This translation can be - * dependent on the hardware IP block's revision, or firmware version, - * and the driver is the only code on the system that has this - * information and can know how to translate that into a clock rate. - * - * The intended use-case for this function is for userspace or other - * kernel code to communicate a particular performance requirement to - * a subsystem; then for the subsystem to communicate that requirement - * to something that is meaningful to the device driver; then for the - * device driver to convert that requirement to a clock rate, and to - * then call omap_pm_set_min_clk_rate(). - * - * Users of this function (such as device drivers) should not simply - * call this function with some high clock rate to ensure "high - * performance." Rather, the device driver should take a performance - * constraint from its subsystem, such as "render at least X polygons - * per second," and use some formula or table to convert that into a - * clock rate constraint given the hardware type and hardware - * revision. Device drivers or subsystems should not assume that they - * know how to make a power/performance tradeoff - some device use - * cases may tolerate a lower-fidelity device function for lower power - * consumption; others may demand a higher-fidelity device function, - * no matter what the power consumption. - * - * Multiple calls to omap_pm_set_min_clk_rate() will replace the - * previous rate value for the device @dev. To remove the minimum clock - * rate constraint for the device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); - -/* - * DSP Bridge-specific constraints - */ - -/** - * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table - * - * Intended for use by DSPBridge. Returns an array of OPP->DSP clock - * frequency entries. The final item in the array should have .rate = - * .opp_id = 0. - */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void); - -/** - * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge - * @opp_id: target DSP OPP ID - * - * Set a minimum OPP ID for the DSP. This is intended to be called - * only from the DSP Bridge MPU-side driver. Unfortunately, the only - * information that code receives from the DSP/BIOS load estimator is the - * target OPP ID; hence, this interface. No return value. - */ -void omap_pm_dsp_set_min_opp(u8 opp_id); - -/** - * omap_pm_dsp_get_opp - report the current DSP OPP ID - * - * Report the current OPP for the DSP. Since on OMAP3, the DSP and - * MPU share a single voltage domain, the OPP ID returned back may - * represent a higher DSP speed than the OPP requested via - * omap_pm_dsp_set_min_opp(). - * - * Returns the current VDD1 OPP ID, or 0 upon error. - */ -u8 omap_pm_dsp_get_opp(void); - - /* * CPUFreq-originated constraint * @@ -296,33 +131,6 @@ u8 omap_pm_dsp_get_opp(void); * functions. */ -/** - * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr - * - * Provide a frequency table usable by CPUFreq for the current chip/board. - * Returns a pointer to a struct cpufreq_frequency_table array or NULL - * upon error. - */ -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); - -/** - * omap_pm_cpu_set_freq - set the current minimum MPU frequency - * @f: MPU frequency in Hz - * - * Set the current minimum CPU frequency. The actual CPU frequency - * used could end up higher if the DSP requested a higher OPP. - * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No - * return value. - */ -void omap_pm_cpu_set_freq(unsigned long f); - -/** - * omap_pm_cpu_get_freq - report the current CPU frequency - * - * Returns the current MPU frequency, or 0 upon error. - */ -unsigned long omap_pm_cpu_get_freq(void); - /* * Device context loss tracking diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2af58570cb65..bb41dc2b580e 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3384,91 +3384,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_enable_clocks - enable main_clk, all interface clocks - * @oh: struct omap_hwmod *oh - * - * Intended to be called by the omap_device code. - */ -int omap_hwmod_enable_clocks(struct omap_hwmod *oh) -{ - unsigned long flags; - - spin_lock_irqsave(&oh->_lock, flags); - _enable_clocks(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_disable_clocks - disable main_clk, all interface clocks - * @oh: struct omap_hwmod *oh - * - * Intended to be called by the omap_device code. - */ -int omap_hwmod_disable_clocks(struct omap_hwmod *oh) -{ - unsigned long flags; - - spin_lock_irqsave(&oh->_lock, flags); - _disable_clocks(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete - * @oh: struct omap_hwmod *oh - * - * Intended to be called by drivers and core code when all posted - * writes to a device must complete before continuing further - * execution (for example, after clearing some device IRQSTATUS - * register bits) - * - * XXX what about targets with multiple OCP threads? - */ -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) -{ - BUG_ON(!oh); - - if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", - oh->name); - return; - } - - /* - * Forces posted writes to complete on the OCP thread handling - * register writes - */ - omap_hwmod_read(oh, oh->class->sysc->sysc_offs); -} - -/** - * omap_hwmod_reset - reset the hwmod - * @oh: struct omap_hwmod * - * - * Under some conditions, a driver may wish to reset the entire device. - * Called from omap_device code. Returns -EINVAL on error or passes along - * the return value from _reset(). - */ -int omap_hwmod_reset(struct omap_hwmod *oh) -{ - int r; - unsigned long flags; - - if (!oh) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - r = _reset(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return r; -} - /* * IP block data retrieval functions */ @@ -3729,52 +3644,12 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) return oh->_mpu_rt_va; } -/** - * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh - * @oh: struct omap_hwmod * - * @init_oh: struct omap_hwmod * (initiator) - * - * Add a sleep dependency between the initiator @init_oh and @oh. - * Intended to be called by DSP/Bridge code via platform_data for the - * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge - * code needs to add/del initiator dependencies dynamically - * before/after accessing a device. Returns the return value from - * _add_initiator_dep(). - * - * XXX Keep a usecount in the clockdomain code - */ -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh) -{ - return _add_initiator_dep(oh, init_oh); -} - /* * XXX what about functions for drivers to save/restore ocp_sysconfig * for context save/restore operations? */ /** - * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh - * @oh: struct omap_hwmod * - * @init_oh: struct omap_hwmod * (initiator) - * - * Remove a sleep dependency between the initiator @init_oh and @oh. - * Intended to be called by DSP/Bridge code via platform_data for the - * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge - * code needs to add/del initiator dependencies dynamically - * before/after accessing a device. Returns the return value from - * _del_initiator_dep(). - * - * XXX Keep a usecount in the clockdomain code - */ -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh) -{ - return _del_initiator_dep(oh, init_oh); -} - -/** * omap_hwmod_enable_wakeup - allow device to wake up the system * @oh: struct omap_hwmod * * @@ -3895,33 +3770,6 @@ int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name) } /** - * omap_hwmod_read_hardreset - read the HW reset line state of submodules - * contained in the hwmod module - * @oh: struct omap_hwmod * - * @name: name of the reset line to look up and read - * - * Return the current state of the hwmod @oh's reset line named @name: - * returns -EINVAL upon parameter error or if this operation - * is unsupported on the current OMAP; otherwise, passes along the return - * value from _read_hardreset(). - */ -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name) -{ - int ret; - unsigned long flags; - - if (!oh) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - ret = _read_hardreset(oh, name); - spin_unlock_irqrestore(&oh->_lock, flags); - - return ret; -} - - -/** * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname * @classname: struct omap_hwmod_class name to search for * @fn: callback function pointer to call for each hwmod in class @classname @@ -4031,86 +3879,6 @@ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) } /** - * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup - * @oh: struct omap_hwmod * - * - * Prevent the hwmod @oh from being reset during the setup process. - * Intended for use by board-*.c files on boards with devices that - * cannot tolerate being reset. Must be called before the hwmod has - * been set up. Returns 0 upon success or negative error code upon - * failure. - */ -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh) -{ - if (!oh) - return -EINVAL; - - if (oh->_state != _HWMOD_STATE_REGISTERED) { - pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n", - oh->name); - return -EINVAL; - } - - oh->flags |= HWMOD_INIT_NO_RESET; - - return 0; -} - -/** - * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ - * @oh: struct omap_hwmod * containing hwmod mux entries - * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup - * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup - * - * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux - * entry number @pad_idx for the hwmod @oh, trigger the interrupt - * service routine for the hwmod's mpu_irqs array index @irq_idx. If - * this function is not called for a given pad_idx, then the ISR - * associated with @oh's first MPU IRQ will be triggered when an I/O - * pad wakeup occurs on that pad. Note that @pad_idx is the index of - * the _dynamic or wakeup_ entry: if there are other entries not - * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these - * entries are NOT COUNTED in the dynamic pad index. This function - * must be called separately for each pad that requires its interrupt - * to be re-routed this way. Returns -EINVAL if there is an argument - * problem or if @oh does not have hwmod mux entries or MPU IRQs; - * returns -ENOMEM if memory cannot be allocated; or 0 upon success. - * - * XXX This function interface is fragile. Rather than using array - * indexes, which are subject to unpredictable change, it should be - * using hwmod IRQ names, and some other stable key for the hwmod mux - * pad records. - */ -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) -{ - int nr_irqs; - - might_sleep(); - - if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 || - pad_idx >= oh->mux->nr_pads_dynamic) - return -EINVAL; - - /* Check the number of available mpu_irqs */ - for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++) - ; - - if (irq_idx >= nr_irqs) - return -EINVAL; - - if (!oh->mux->irqs) { - /* XXX What frees this? */ - oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic, - GFP_KERNEL); - if (!oh->mux->irqs) - return -ENOMEM; - } - oh->mux->irqs[pad_idx] = irq_idx; - - return 0; -} - -/** * omap_hwmod_init - initialize the hwmod code * * Sets up some function pointers needed by the hwmod code to operate on the diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 5b42fafcaf55..fcfdd85aad62 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -703,13 +703,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); - -int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -int omap_hwmod_disable_clocks(struct omap_hwmod *oh); - -int omap_hwmod_reset(struct omap_hwmod *oh); -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); @@ -724,11 +717,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); - int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); @@ -740,10 +728,6 @@ int omap_hwmod_for_each_by_class(const char *classname, int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); - -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); - extern void __init omap_hwmod_init(void); const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 11468eea3871..4e8e93c398db 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -29,8 +29,6 @@ #include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> -#include "am35xx.h" - #include "soc.h" #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -50,6 +48,8 @@ * elsewhere. */ +#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000 + /* * IP blocks */ @@ -3459,15 +3459,6 @@ static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { - { - .pa_start = AM35XX_IPSS_MDIO_BASE, - .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> davinci mdio */ /* * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; @@ -3478,25 +3469,15 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_mdio_hwmod, .clk = "emac_fck", - .addr = am35xx_mdio_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { - { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, }, - { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, }, - { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START }, - { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START }, - { .irq = -1 }, -}; - static struct omap_hwmod_class am35xx_emac_class = { .name = "davinci_emac", }; static struct omap_hwmod am35xx_emac_hwmod = { .name = "davinci_emac", - .mpu_irqs = am35xx_emac_mpu_irqs, .class = &am35xx_emac_class, /* * According to Mark Greer, the MPU will not return from WFI @@ -3519,15 +3500,6 @@ static struct omap_hwmod_ocp_if am35xx_emac__l3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { - { - .pa_start = AM35XX_IPSS_EMAC_BASE, - .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> davinci emac */ /* * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; @@ -3538,7 +3510,6 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_emac_hwmod, .clk = "emac_ick", - .addr = am35xx_emac_addrs, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 1a19fa096bab..8e903564ede2 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } - -void ti81xx_musb_phy_power(u8 on) -{ - void __iomem *scm_base = NULL; - u32 usbphycfg; - - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); - if (!scm_base) { - pr_err("system control module ioremap failed\n"); - return; - } - - usbphycfg = readl_relaxed(scm_base + USBCTRL0); - - if (on) { - if (cpu_is_ti816x()) { - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; - usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC; - } else if (cpu_is_ti814x()) { - usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN - | USBPHY_DPINPUT | USBPHY_DMINPUT); - usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); - } - } else { - if (cpu_is_ti816x()) - usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE; - else if (cpu_is_ti814x()) - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; - - } - writel_relaxed(usbphycfg, scm_base + USBCTRL0); - - iounmap(scm_base); -} diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 3d7eee1d3cfa..190fa43e7479 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -19,7 +19,6 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> -#include "am35xx.h" #include "common.h" #include "common-board-devices.h" #include "dss-common.h" diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 33c8846b4193..a69e9a33cb6d 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -13,7 +13,7 @@ */ #include <linux/of.h> -#include <asm/pmu.h> +#include <asm/system_info.h> #include "soc.h" #include "omap_hwmod.h" @@ -37,7 +37,8 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) { int i; struct omap_hwmod *oh[3]; - char *dev_name = "arm-pmu"; + char *dev_name = cpu_architecture() == CPU_ARCH_ARMv6 ? + "armv6-pmu" : "armv7-pmu"; if ((!oh_num) || (oh_num > 3)) return -EINVAL; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 7fb033eca0a5..78af6d8cf2e2 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -115,7 +115,6 @@ static int _pwrdm_register(struct powerdomain *pwrdm) } pwrdm->voltdm.ptr = voltdm; INIT_LIST_HEAD(&pwrdm->voltdm_node); - voltdm_add_pwrdm(voltdm, pwrdm); skip_voltdm: spin_lock_init(&pwrdm->_lock); @@ -484,87 +483,6 @@ pac_exit: } /** - * pwrdm_del_clkdm - remove a clockdomain from a powerdomain - * @pwrdm: struct powerdomain * to add the clockdomain to - * @clkdm: struct clockdomain * to associate with a powerdomain - * - * Dissociate the clockdomain @clkdm from the powerdomain - * @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT - * if @clkdm was not associated with the powerdomain, or 0 upon - * success. - */ -int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) -{ - int ret = -EINVAL; - int i; - - if (!pwrdm || !clkdm) - return -EINVAL; - - pr_debug("powerdomain: %s: dissociating clockdomain %s\n", - pwrdm->name, clkdm->name); - - for (i = 0; i < PWRDM_MAX_CLKDMS; i++) - if (pwrdm->pwrdm_clkdms[i] == clkdm) - break; - - if (i == PWRDM_MAX_CLKDMS) { - pr_debug("powerdomain: %s: clkdm %s not associated?!\n", - pwrdm->name, clkdm->name); - ret = -ENOENT; - goto pdc_exit; - } - - pwrdm->pwrdm_clkdms[i] = NULL; - - ret = 0; - -pdc_exit: - return ret; -} - -/** - * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm - * @pwrdm: struct powerdomain * to iterate over - * @fn: callback function * - * - * Call the supplied function @fn for each clockdomain in the powerdomain - * @pwrdm. The callback function can return anything but 0 to bail - * out early from the iterator. Returns -EINVAL if presented with - * invalid pointers; or passes along the last return value of the - * callback function, which should be 0 for success or anything else - * to indicate failure. - */ -int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, - int (*fn)(struct powerdomain *pwrdm, - struct clockdomain *clkdm)) -{ - int ret = 0; - int i; - - if (!fn) - return -EINVAL; - - for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++) - if (pwrdm->pwrdm_clkdms[i]) - ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); - - return ret; -} - -/** - * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in - * @pwrdm: struct powerdomain * - * - * Return a pointer to the struct voltageomain that the specified powerdomain - * @pwrdm exists in. - */ -struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm) -{ - return pwrdm->voltdm.ptr; -} - -/** * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain * @pwrdm: struct powerdomain * * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 11bd4dd7d8d6..28a796ce07d7 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -212,11 +212,6 @@ int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), void *user); int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, - int (*fn)(struct powerdomain *pwrdm, - struct clockdomain *clkdm)); -struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm); int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index cfde3f4a03cc..ed8a3d8b739a 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -145,7 +145,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); extern int __init omap3xxx_prm_init(void); -extern u32 omap3xxx_prm_get_reset_sources(void); int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits); void omap3xxx_prm_iva_idle(void); void omap3_prm_reset_modem(void); diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index f7512515fde5..714329565b90 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -39,7 +39,6 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); extern int __init omap44xx_prm_init(void); -extern u32 omap44xx_prm_get_reset_sources(void); #endif diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index bc897231bd10..e4562b2b973b 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (soc_is_am35xx()) { - oh_name = "am35x_otg_hs"; - name = "musb-am35x"; - } else if (cpu_is_ti81xx()) { - oh_name = "usb_otg_hs"; - name = "musb-ti81xx"; - } else { - oh_name = "usb_otg_hs"; - name = "musb-omap2430"; - } + oh_name = "usb_otg_hs"; + name = "musb-omap2430"; oh = omap_hwmod_lookup(oh_name); if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 4ba2ae759895..3395365ef1db 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -68,5 +68,3 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 3783b8625f0f..cba8cada8c81 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -224,37 +224,6 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, } /** - * omap_change_voltscale_method() - API to change the voltage scaling method. - * @voltdm: pointer to the VDD whose voltage scaling method - * has to be changed. - * @voltscale_method: the method to be used for voltage scaling. - * - * This API can be used by the board files to change the method of voltage - * scaling between vpforceupdate and vcbypass. The parameter values are - * defined in voltage.h - */ -void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) -{ - if (!voltdm || IS_ERR(voltdm)) { - pr_warn("%s: VDD specified does not exist!\n", __func__); - return; - } - - switch (voltscale_method) { - case VOLTSCALE_VPFORCEUPDATE: - voltdm->scale = omap_vp_forceupdate_scale; - return; - case VOLTSCALE_VCBYPASS: - voltdm->scale = omap_vc_bypass_scale; - return; - default: - pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n", - __func__); - } -} - -/** * omap_voltage_late_init() - Init the various voltage parameters * * This API is to be called in the later stages of the @@ -316,90 +285,11 @@ static struct voltagedomain *_voltdm_lookup(const char *name) return voltdm; } -/** - * voltdm_add_pwrdm - add a powerdomain to a voltagedomain - * @voltdm: struct voltagedomain * to add the powerdomain to - * @pwrdm: struct powerdomain * to associate with a voltagedomain - * - * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This - * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if - * presented with invalid pointers; -ENOMEM if memory could not be allocated; - * or 0 upon success. - */ -int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) -{ - if (!voltdm || !pwrdm) - return -EINVAL; - - pr_debug("voltagedomain: %s: associating powerdomain %s\n", - voltdm->name, pwrdm->name); - - list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); - - return 0; -} - -/** - * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm - * @voltdm: struct voltagedomain * to iterate over - * @fn: callback function * - * - * Call the supplied function @fn for each powerdomain in the - * voltagedomain @voltdm. Returns -EINVAL if presented with invalid - * pointers; or passes along the last return value of the callback - * function, which should be 0 for success or anything else to - * indicate failure. - */ -int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, - int (*fn)(struct voltagedomain *voltdm, - struct powerdomain *pwrdm)) -{ - struct powerdomain *pwrdm; - int ret = 0; - - if (!fn) - return -EINVAL; - - list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) - ret = (*fn)(voltdm, pwrdm); - - return ret; -} - -/** - * voltdm_for_each - call function on each registered voltagedomain - * @fn: callback function * - * - * Call the supplied function @fn for each registered voltagedomain. - * The callback function @fn can return anything but 0 to bail out - * early from the iterator. Returns the last return value of the - * callback function, which should be 0 for success or anything else - * to indicate failure; or -EINVAL if the function pointer is null. - */ -int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), - void *user) -{ - struct voltagedomain *temp_voltdm; - int ret = 0; - - if (!fn) - return -EINVAL; - - list_for_each_entry(temp_voltdm, &voltdm_list, node) { - ret = (*fn)(temp_voltdm, user); - if (ret) - break; - } - - return ret; -} - static int _voltdm_register(struct voltagedomain *voltdm) { if (!voltdm || !voltdm->name) return -EINVAL; - INIT_LIST_HEAD(&voltdm->pwrdm_list); list_add(&voltdm->node, &voltdm_list); pr_debug("voltagedomain: registered %s\n", voltdm->name); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index f7f2879b31b0..e64550321510 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -23,10 +23,6 @@ struct powerdomain; -/* XXX document */ -#define VOLTSCALE_VPFORCEUPDATE 1 -#define VOLTSCALE_VCBYPASS 2 - /* * OMAP3 GENERIC setup times. Revisit to see if these needs to be * passed from board or PMIC file @@ -55,7 +51,6 @@ struct omap_vfsm_instance { * @name: Name of the voltage domain which can be used as a unique identifier. * @scalable: Whether or not this voltage domain is scalable * @node: list_head linking all voltage domains - * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vc: pointer to VC channel associated with this voltagedomain * @vp: pointer to VP associated with this voltagedomain * @read: read a VC/VP register @@ -71,7 +66,6 @@ struct voltagedomain { char *name; bool scalable; struct list_head node; - struct list_head pwrdm_list; struct omap_vc_channel *vc; const struct omap_vfsm_instance *vfsm; struct omap_vp_instance *vp; @@ -163,8 +157,6 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_voltdm_pmic *pmic); -void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method); int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); @@ -175,11 +167,6 @@ extern void omap54xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); -int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), - void *user); -int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, - int (*fn)(struct voltagedomain *voltdm, - struct powerdomain *pwrdm)); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); void voltdm_reset(struct voltagedomain *voltdm); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); |
