diff options
Diffstat (limited to 'arch/arm/mach-omap2')
25 files changed, 71 insertions, 55 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d54969be0a54..5de6eac0a725 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -26,13 +26,13 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ae2963a98041..5dac974be625 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = { OMAP_MUX_MODE0), }; -static struct omap_board_data serial1_data = { +static struct omap_board_data serial1_data __initdata = { .id = 0, .pads = serial1_pads, .pads_cnt = ARRAY_SIZE(serial1_pads), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 73fa90bb6953..63de2d396e2d 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = { { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, }; -static int omap_ethernet_init(void) +static int __init omap_ethernet_init(void) { int status; @@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = -EINVAL, .nonremovable = true, .ocr_mask = MMC_VDD_29_30, + .no_off_init = true, }, { .mmc = 1, @@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f3beb8eeef77..b124bdfb4239 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -27,13 +27,13 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/smc91x.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/gpio.h> #include <plat/led.h> #include <plat/usb.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c63115bc1536..77456dec93ea 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -63,8 +63,6 @@ #define SB_T35_SMSC911X_CS 4 #define SB_T35_SMSC911X_GPIO 65 -#define NAND_BLOCK_SIZE SZ_128K - #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> #include <plat/gpmc-smsc911x.h> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 08f08e812492..c3a9fd35034a 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -48,6 +48,7 @@ #include "mux.h" #include "control.h" +#include "common-board-devices.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL, }; -static int cm_t3517_init_usbh(void) +static int __init cm_t3517_init_usbh(void) { int err; @@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void) #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition cm_t3517_nand_partitions[] = { { .name = "xloader", diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index cf520d7dd614..34956ec83296 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -61,8 +61,6 @@ #include "timer-gp.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index be71426359f2..7f21d24bd437 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -54,8 +54,6 @@ #include "pm.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void) beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); + gpio_free_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + switch (beagle_rev) { case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); @@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void) omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1d10736c6d3c..2a0bb4818cae 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -30,6 +30,7 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -41,7 +42,6 @@ #include <plat/board.h> #include <plat/common.h> -#include <mach/gpio.h> #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> @@ -57,8 +57,6 @@ #define PANDORA_WIFI_NRESET_GPIO 23 #define OMAP3_PANDORA_TS_GPIO 94 -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition omap3pandora_nand_partitions[] = { { .name = "xloader", diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 82872d7d313b..5f649faf7377 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -56,8 +56,6 @@ #include <asm/setup.h> -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP3_AC_GPIO 136 #define OMAP3_TS_GPIO 162 #define TB_BL_PWM_TIMER 9 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 90485fced973..0cfe2005cb50 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -687,7 +687,7 @@ static void __init omap4_panda_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1555918e3ffa..175e1ab2b04d 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -24,6 +24,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c/twl.h> @@ -45,7 +46,6 @@ #include <plat/common.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -65,8 +65,6 @@ #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 -#define NAND_BLOCK_SIZE SZ_128K - #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 #define OVERO_SMSC911X2_CS 4 diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f6247e71a194..990366726c58 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = { .name = "V28_A", .min_uV = 2800000, .max_uV = 3000000, + .always_on = true, /* due VIO leak to AIC34 VDDs */ .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, @@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index c7c6beb1ec24..d4683ba5f721 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = { { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, }; -static void zoom_lcd_panel_init(void) +static void __init zoom_lcd_panel_init(void) { zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index e94903b2c65b..94ccf464677b 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -85,17 +85,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request(gpio_pendown, "TS PenDown"); - if (err) { - pr_err("Could not obtain gpio for TS PenDown: %d\n", err); - return; - } - - gpio_direction_input(gpio_pendown); - gpio_export(gpio_pendown, 0); + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } + gpio_export(gpio_pendown, 0); - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + } ads7846_config.gpio_pendown = gpio_pendown; diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index eb80b3b0ef47..679719051df5 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,6 +1,8 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#define NAND_BLOCK_SIZE SZ_128K + struct twl4030_platform_data; struct mtd_partition; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7b8558564591..5b8ca680ed93 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -97,7 +97,7 @@ static int __init omap4_l3_init(void) WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); - return PTR_ERR(od); + return IS_ERR(od) ? PTR_ERR(od) : 0; } postcore_initcall(omap4_l3_init); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b2f30bed5a20..66868c5d5a29 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, int power_on, int vdd) { u32 reg; + unsigned long timeout; if (power_on) { reg = omap4_ctrl_pad_readl(control_pbias_offset); @@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, OMAP4_MMC1_PWRDNZ_MASK | OMAP4_USBC1_ICUSB_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); - /* 4 microsec delay for comparator to generate an error*/ - udelay(4); - reg = omap4_ctrl_pad_readl(control_pbias_offset); + + timeout = jiffies + msecs_to_jiffies(5); + do { + reg = omap4_ctrl_pad_readl(control_pbias_offset); + if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK)) + break; + usleep_range(100, 200); + } while (!time_after(jiffies, timeout)); + if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ @@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, if (c->no_off) mmc->slots[0].no_off = 1; + if (c->no_off_init) + mmc->slots[0].no_regulator_off_init = c->no_off_init; + if (c->vcc_aux_disable_is_sleep) mmc->slots[0].vcc_aux_disable_is_sleep = 1; diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index f119348827d4..f757e78d4d4f 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -18,6 +18,7 @@ struct omap2_hsmmc_info { bool nonremovable; /* Nonremovable e.g. eMMC */ bool power_saving; /* Try to sleep or power off when possible */ bool no_off; /* power_saving and power is not to go off */ + bool no_off_init; /* no power off when not in MMC sleep state */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index a4ab1e364313..c7fb22abc219 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val, void omap_mux_write_array(struct omap_mux_partition *partition, struct omap_board_mux *board_mux) { + if (!board_mux) + return; + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { omap_mux_write(partition, board_mux->value, board_mux->reg_offset); @@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio( u16 omap_mux_get_gpio(int gpio) { struct omap_mux_partition *partition; - struct omap_mux *m; + struct omap_mux *m = NULL; list_for_each_entry(partition, &mux_partitions, node) { m = omap_mux_get_by_gpio(partition, gpio); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 137f321c029f..2132308ad1e4 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags); /** * omap4_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table + * @board_subset: Board specific mux table + * @board_wkup_subset: Board specific mux table for wakeup instance * @flags: OMAP package type used for the board */ -int omap4_mux_init(struct omap_board_mux *board_mux, int flags); +int omap4_mux_init(struct omap_board_mux *board_subset, + struct omap_board_mux *board_wkup_subset, int flags); /** * omap_mux_init - private mux init function, do not call diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c index 9a66445112ae..f5a74daab2ff 100644 --- a/arch/arm/mach-omap2/mux44xx.c +++ b/arch/arm/mach-omap2/mux44xx.c @@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { #define omap4_wkup_cbl_cbs_ball NULL #endif -int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags) +int __init omap4_mux_init(struct omap_board_mux *board_subset, + struct omap_board_mux *board_wkup_subset, int flags) { struct omap_ball *package_balls_core; struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball; @@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags) OMAP_MUX_GPIO_IN_MODE3, OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE, OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE, - omap4_wkup_muxmodes, NULL, board_subset, + omap4_wkup_muxmodes, NULL, board_wkup_subset, package_balls_wkup); return ret; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e03429453ce7..293fa6cd50e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data) { struct omap_hwmod *temp_oh; - int ret; + int ret = 0; if (!fn) return -EINVAL; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index abc548a0c98d..e1c69ffe0f69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_iva_seq1_hwmod, /* kbd class */ -/* &omap44xx_kbd_hwmod, */ + &omap44xx_kbd_hwmod, /* mailbox class */ &omap44xx_mailbox_hwmod, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index f47813edd951..58775e3c8476 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev) /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - if (!dev) + if (!dev) { + iounmap(ctrl_base); return 0; + } phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { |
