diff options
Diffstat (limited to 'arch/arm/mach-omap2/prm44xx.c')
| -rw-r--r-- | arch/arm/mach-omap2/prm44xx.c | 145 |
1 files changed, 1 insertions, 144 deletions
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a2a04bfa9628..00165558fc4d 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,7 +1,7 @@ /* * OMAP4 PRM module functions * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2011 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley @@ -24,12 +24,6 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" -/* - * Address offset (in bytes) between the reset control and the reset - * status registers: 4 bytes on OMAP4 - */ -#define OMAP4_RST_CTRL_ST_OFFSET 4 - /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -56,140 +50,3 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } - -/* Read a PRM register, AND it, and shift the result down to bit 0 */ -/* XXX deprecated */ -u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask) -{ - u32 v; - - v = __raw_readl(reg); - v &= mask; - v >>= __ffs(mask); - - return v; -} - -/* Read-modify-write a register in a PRM module. Caller must lock */ -/* XXX deprecated */ -u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg) -{ - u32 v; - - v = __raw_readl(reg); - v &= ~mask; - v |= bits; - __raw_writel(v, reg); - - return v; -} - -u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 reg) -{ - return omap4_prm_rmw_inst_reg_bits(bits, bits, inst, reg); -} - -u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg) -{ - return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg); -} - -/** - * omap4_prm_is_hardreset_asserted - read the HW reset line state of - * submodules contained in the hwmod module - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to check - * - * Returns 1 if the (sub)module hardreset line is currently asserted, - * 0 if the (sub)module hardreset line is not currently asserted, or - * -EINVAL upon parameter error. - */ -int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift) -{ - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift)); -} - -/** - * omap4_prm_assert_hardreset - assert the HW reset line of a submodule - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to assert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * place the submodule into reset. Returns 0 upon success or -EINVAL - * upon an argument error. - */ -int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - mask = 1 << shift; - omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg); - - return 0; -} - -/** - * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to deassert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * take the submodule out of reset and wait until the PRCM indicates - * that the reset has completed before returning. Returns 0 upon success or - * -EINVAL upon an argument error, -EEXIST if the submodule was already out - * of reset, or -EBUSY if the submodule did not exit reset promptly. - */ -int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - void __iomem *rstst_reg; - int c; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET; - - mask = 1 << shift; - - /* Check the current status to avoid de-asserting the line twice */ - if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0) - return -EEXIST; - - /* Clear the reset status by writing 1 to the status bit */ - omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg); - /* de-assert the reset control line */ - omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg); - /* wait the status to be set */ - omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask), - MAX_MODULE_HARDRESET_WAIT, c); - - return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; -} - -void omap4_prm_global_warm_sw_reset(void) -{ - u32 v; - - v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); - v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK; - omap4_prm_write_inst_reg(v, OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); - - /* OCP barrier */ - v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); -} |
