diff options
Diffstat (limited to 'arch/arm/mach-omap2/clock34xx.c')
| -rw-r--r-- | arch/arm/mach-omap2/clock34xx.c | 261 |
1 files changed, 17 insertions, 244 deletions
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index d4217b93e10b..6febd5f11e85 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,13 +2,14 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2009 Nokia Corporation + * Copyright (C) 2007-2010 Nokia Corporation * - * Written by Paul Walmsley - * Testing and integration fixes by Jouni Högander + * Paul Walmsley + * Jouni Högander * * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, + * Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,49 +17,23 @@ */ #undef DEBUG -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/limits.h> -#include <linux/bitops.h> -#include <plat/cpu.h> #include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> -#include <asm/div64.h> -#include <asm/clkdev.h> #include "clock.h" #include "clock34xx.h" -#include "sdrc.h" -#include "prm.h" -#include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" -#define CYCLES_PER_MHZ 1000000 - -/* - * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks - * that are sourced by DPLL5, and both of these require this clock - * to be at 120 MHz for proper operation. - */ -#define DPLL5_FREQ_FOR_USBHOST 120000000 - -/* needed by omap3_core_dpll_m2_set_rate() */ -struct clk *sdrc_ick_p, *arm_fck_p; - /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator * * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift * from the CM_{I,F}CLKEN bit. Pass back the correct info via @@ -66,13 +41,15 @@ struct clk *sdrc_ick_p, *arm_fck_p; */ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, void __iomem **idlest_reg, - u8 *idlest_bit) + u8 *idlest_bit, + u8 *idlest_val) { u32 r; r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); *idlest_reg = (__force void __iomem *)r; *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; } const struct clkops clkops_omap3430es2_ssi_wait = { @@ -87,6 +64,7 @@ const struct clkops clkops_omap3430es2_ssi_wait = { * @clk: struct clk * being enabled * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator * * Some OMAP modules on OMAP3 ES2+ chips have both initiator and * target IDLEST bits. For our purposes, we are concerned with the @@ -97,7 +75,8 @@ const struct clkops clkops_omap3430es2_ssi_wait = { */ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, void __iomem **idlest_reg, - u8 *idlest_bit) + u8 *idlest_bit, + u8 *idlest_val) { u32 r; @@ -105,6 +84,7 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, *idlest_reg = (__force void __iomem *)r; /* USBHOST_IDLE has same shift */ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; } const struct clkops clkops_omap3430es2_dss_usbhost_wait = { @@ -119,6 +99,7 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = { * @clk: struct clk * being enabled * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator * * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via @@ -126,13 +107,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = { */ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, void __iomem **idlest_reg, - u8 *idlest_bit) + u8 *idlest_bit, + u8 *idlest_val) { u32 r; r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); *idlest_reg = (__force void __iomem *)r; *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; } const struct clkops clkops_omap3430es2_hsotgusb_wait = { @@ -141,213 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = { .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, .find_companion = omap2_clk_dflt_find_companion, }; - -const struct clkops clkops_noncore_dpll_ops = { - .enable = omap3_noncore_dpll_enable, - .disable = omap3_noncore_dpll_disable, -}; - -int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) -{ - /* - * According to the 12-5 CDP code from TI, "Limitation 2.5" - * on 3430ES1 prevents us from changing DPLL multipliers or dividers - * on DPLL4. - */ - if (omap_rev() == OMAP3430_REV_ES1_0) { - printk(KERN_ERR "clock: DPLL4 cannot change rate due to " - "silicon 'Limitation 2.5' on 3430ES1.\n"); - return -EINVAL; - } - return omap3_noncore_dpll_set_rate(clk, rate); -} - - -/* - * CORE DPLL (DPLL3) rate programming functions - * - * These call into SRAM code to do the actual CM writes, since the SDRAM - * is clocked from DPLL3. - */ - -/** - * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Program the DPLL M2 divider with the rounded target rate. Returns - * -EINVAL upon error, or 0 upon success. - */ -int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) -{ - u32 new_div = 0; - u32 unlock_dll = 0; - u32 c; - unsigned long validrate, sdrcrate, _mpurate; - struct omap_sdrc_params *sdrc_cs0; - struct omap_sdrc_params *sdrc_cs1; - int ret; - - if (!clk || !rate) - return -EINVAL; - - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) - return -EINVAL; - - sdrcrate = sdrc_ick_p->rate; - if (rate > clk->rate) - sdrcrate <<= ((rate / clk->rate) >> 1); - else - sdrcrate >>= ((clk->rate / rate) >> 1); - - ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); - if (ret) - return -EINVAL; - - if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { - pr_debug("clock: will unlock SDRC DLL\n"); - unlock_dll = 1; - } - - /* - * XXX This only needs to be done when the CPU frequency changes - */ - _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; - c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; - c += 1; /* for safety */ - c *= SDRC_MPURATE_LOOPS; - c >>= SDRC_MPURATE_SCALE; - if (c == 0) - c = 1; - - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); - pr_debug("clock: SDRC CS0 timing params used:" - " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); - if (sdrc_cs1) - pr_debug("clock: SDRC CS1 timing params used: " - " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - - if (sdrc_cs1) - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - else - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - 0, 0, 0, 0); - - return 0; -} - -/* Common clock code */ - -/* - * As it is structured now, this will prevent an OMAP2/3 multiboot - * kernel from compiling. This will need further attention. - */ -#if defined(CONFIG_ARCH_OMAP3) - -struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, -}; - -/* - * Set clocks for bypass mode for reboot to work. - */ -void omap2_clk_prepare_for_reboot(void) -{ - /* REVISIT: Not ready for 343x */ -#if 0 - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -#endif -} - -void omap3_clk_lock_dpll5(void) -{ - struct clk *dpll5_clk; - struct clk *dpll5_m2_clk; - - dpll5_clk = clk_get(NULL, "dpll5_ck"); - clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); - clk_enable(dpll5_clk); - - /* Enable autoidle to allow it to enter low power bypass */ - omap3_dpll_allow_idle(dpll5_clk); - - /* Program dpll5_m2_clk divider for no division */ - dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); - clk_enable(dpll5_m2_clk); - clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); - - clk_disable(dpll5_m2_clk); - clk_disable(dpll5_clk); - return; -} - -/* REVISIT: Move this init stuff out into clock.c */ - -/* - * Switch the MPU rate if specified on cmdline. - * We cannot do this early until cmdline is parsed. - */ -static int __init omap2_clk_arch_init(void) -{ - struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck; - unsigned long osc_sys_rate; - - if (!mpurate) - return -EINVAL; - - /* XXX test these for success */ - dpll1_ck = clk_get(NULL, "dpll1_ck"); - arm_fck = clk_get(NULL, "arm_fck"); - core_ck = clk_get(NULL, "core_ck"); - osc_sys_ck = clk_get(NULL, "osc_sys_ck"); - - /* REVISIT: not yet ready for 343x */ - if (clk_set_rate(dpll1_ck, mpurate)) - printk(KERN_ERR "*** Unable to set MPU rate\n"); - - recalculate_root_clocks(); - - osc_sys_rate = clk_get_rate(osc_sys_ck); - - pr_info("Switched to new clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_rate / 1000000), - ((osc_sys_rate / 100000) % 10), - (clk_get_rate(core_ck) / 1000000), - (clk_get_rate(arm_fck) / 1000000)); - - calibrate_delay(); - - return 0; -} -arch_initcall(omap2_clk_arch_init); - - -#endif - - |
