diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3evm.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 111 |
1 files changed, 28 insertions, 83 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d43464a303..c452b3f3331a 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct regulator_consumer_supply omap3evm_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3evm_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3evm_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply), + .consumer_supplies = omap3evm_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply), + .consumer_supplies = omap3evm_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3evm_vmmc1_supply.dev = mmc[0].dev; - omap3evm_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = { .setup = omap3evm_twl_gpio_setup, }; -static struct twl4030_usb_data omap3evm_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3evm_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3evm_audio_data; - -static struct twl4030_codec_data omap3evm_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3evm_audio_data, -}; - -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_evm_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_evm_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), - .consumer_supplies = omap3_evm_vpll2_supplies, -}; - /* ads7846 on SPI */ -static struct regulator_consumer_supply omap3evm_vio_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply omap3evm_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; /* VIO for ads7846 */ static struct regulator_init_data omap3evm_vio = { @@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply), + .consumer_supplies = omap3evm_vio_supply, }; #ifdef CONFIG_WL12XX_PLATFORM_DATA @@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) -static struct regulator_consumer_supply omap3evm_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply), + .consumer_supplies = omap3evm_vmmc2_supply, }; static struct fixed_voltage_config omap3evm_vwlan = { @@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { #endif static struct twl4030_platform_data omap3evm_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, - .madc = &omap3evm_madc_data, - .usb = &omap3evm_usb_data, .gpio = &omap3evm_gpio_data, - .codec = &omap3evm_codec_data, - .vdac = &omap3_evm_vdac, - .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, .vmmc1 = &omap3evm_vmmc1, .vsim = &omap3evm_vsim, @@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = { static int __init omap3_evm_i2c_init(void) { + omap3_pmic_get_config(&omap3evm_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3evm_twldata.vdac->constraints.apply_uV = true; + omap3evm_twldata.vpll2->constraints.apply_uV = true; + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); @@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END |
