diff options
Diffstat (limited to 'arch/arm/mach-nomadik/cpu-8815.c')
| -rw-r--r-- | arch/arm/mach-nomadik/cpu-8815.c | 71 |
1 files changed, 1 insertions, 70 deletions
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 13e0df9c11ce..cce2c9dfb5d1 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,15 +25,11 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/platform_data/clk-nomadik.h> -#include <linux/clocksource.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/mtd/fsmc.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -113,50 +109,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) writel(1, srcbase + 0x18); } -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -static void __init cpu8815_timer_init_of(void) -{ - struct device_node *mtu; - void __iomem *base; - int irq; - u32 src_cr; - - /* We need this to be up now */ - nomadik_clk_init(); - - mtu = of_find_node_by_path("/mtu@101e2000"); - if (!mtu) - return; - base = of_iomap(mtu, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(mtu, 0); - - pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(base); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, base); - - clocksource_of_init(); -} - -static struct fsmc_nand_timings cpu8815_nand_timings = { - .thiz = 0, - .thold = 0x10, - .twait = 0x0A, - .tset = 0, -}; - -static struct fsmc_nand_platform_data cpu8815_nand_data = { - .nand_timings = &cpu8815_nand_timings, -}; - /* * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects * to simply request an IRQ passed as a resource. So the GPIO pin needs @@ -190,15 +142,6 @@ static int __init cpu8815_eth_init(void) device_initcall(cpu8815_eth_init); /* - * TODO: - * cannot be set from device tree, convert to a proper DT - * binding. - */ -static struct mmci_platform_data mmcsd_plat_data = { - .ocr_mask = MMC_VDD_29_30, -}; - -/* * This GPIO pin turns on a line that is used to detect card insertion * on this board. */ @@ -232,24 +175,13 @@ static int __init cpu8815_mmcsd_init(void) } device_initcall(cpu8815_mmcsd_init); - -/* These are mostly to get the right device names for the clock lookups */ -static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, - NULL, &cpu8815_nand_data), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, - NULL, &mmcsd_plat_data), - { /* sentinel */ }, -}; - static void __init cpu8815_init_of(void) { #ifdef CONFIG_CACHE_L2X0 /* At full speed latency must be >=2, so 0x249 in low bits */ l2x0_of_init(0x00730249, 0xfe000fff); #endif - of_platform_populate(NULL, of_default_bus_match_table, - cpu8815_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * cpu8815_board_compat[] = { @@ -259,7 +191,6 @@ static const char * cpu8815_board_compat[] = { DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") .map_io = cpu8815_map_io, - .init_time = cpu8815_timer_init_of, .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, |
