diff options
Diffstat (limited to 'arch/arm/mach-mmp/pxa910.c')
| -rw-r--r-- | arch/arm/mach-mmp/pxa910.c | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c new file mode 100644 index 000000000000..453f8f7758bf --- /dev/null +++ b/arch/arm/mach-mmp/pxa910.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-mmp/pxa910.c + * + * Code specific to PXA910 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> + +#include <asm/mach/time.h> +#include <mach/addr-map.h> +#include <mach/regs-apbc.h> +#include <mach/regs-apmu.h> +#include <mach/cputype.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/dma.h> +#include <mach/mfp.h> +#include <mach/devices.h> + +#include "common.h" +#include "clock.h" + +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = +{ + MFP_ADDR_X(GPIO0, GPIO54, 0xdc), + MFP_ADDR_X(GPIO67, GPIO98, 0x1b8), + MFP_ADDR_X(GPIO100, GPIO109, 0x238), + + MFP_ADDR(GPIO123, 0xcc), + MFP_ADDR(GPIO124, 0xd0), + + MFP_ADDR(DF_IO0, 0x40), + MFP_ADDR(DF_IO1, 0x3c), + MFP_ADDR(DF_IO2, 0x38), + MFP_ADDR(DF_IO3, 0x34), + MFP_ADDR(DF_IO4, 0x30), + MFP_ADDR(DF_IO5, 0x2c), + MFP_ADDR(DF_IO6, 0x28), + MFP_ADDR(DF_IO7, 0x24), + MFP_ADDR(DF_IO8, 0x20), + MFP_ADDR(DF_IO9, 0x1c), + MFP_ADDR(DF_IO10, 0x18), + MFP_ADDR(DF_IO11, 0x14), + MFP_ADDR(DF_IO12, 0x10), + MFP_ADDR(DF_IO13, 0xc), + MFP_ADDR(DF_IO14, 0x8), + MFP_ADDR(DF_IO15, 0x4), + + MFP_ADDR(DF_nCS0_SM_nCS2, 0x44), + MFP_ADDR(DF_nCS1_SM_nCS3, 0x48), + MFP_ADDR(SM_nCS0, 0x4c), + MFP_ADDR(SM_nCS1, 0x50), + MFP_ADDR(DF_WEn, 0x54), + MFP_ADDR(DF_REn, 0x58), + MFP_ADDR(DF_CLE_SM_OEn, 0x5c), + MFP_ADDR(DF_ALE_SM_WEn, 0x60), + MFP_ADDR(SM_SCLK, 0x64), + MFP_ADDR(DF_RDY0, 0x68), + MFP_ADDR(SM_BE0, 0x6c), + MFP_ADDR(SM_BE1, 0x70), + MFP_ADDR(SM_ADV, 0x74), + MFP_ADDR(DF_RDY1, 0x78), + MFP_ADDR(SM_ADVMUX, 0x7c), + MFP_ADDR(SM_RDY, 0x80), + + MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84), + + MFP_ADDR_END, +}; + +#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) + +static void __init pxa910_init_gpio(void) +{ + int i; + + /* enable GPIO clock */ + __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO); + + /* unmask GPIO edge detection for all 4 banks - APMASKx */ + for (i = 0; i < 4; i++) + __raw_writel(0xffffffff, APMASK(i)); + + pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL); +} + +void __init pxa910_init_irq(void) +{ + icu_init_irq(); + pxa910_init_gpio(); +} + +/* APB peripheral clocks */ +static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); +static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); + +/* device and clock bindings */ +static struct clk_lookup pxa910_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), +}; + +static int __init pxa910_init(void) +{ + if (cpu_is_pxa910()) { + mfp_init_base(MFPR_VIRT_BASE); + mfp_init_addr(pxa910_mfp_addr_map); + pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); + clks_register(ARRAY_AND_SIZE(pxa910_clkregs)); + } + + return 0; +} +postcore_initcall(pxa910_init); + +/* system timer - clock enabled, 3.25MHz */ +#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) + +static void __init pxa910_timer_init(void) +{ + /* reset and configure */ + __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS); + + timer_init(IRQ_PXA910_AP1_TIMER1); +} + +struct sys_timer pxa910_timer = { + .init = pxa910_timer_init, +}; + +/* on-chip devices */ + +/* NOTE: there are totally 3 UARTs on PXA910: + * + * UART1 - Slow UART (can be used both by AP and CP) + * UART2/3 - Fast UART + * + * To be backward compatible with the legacy FFUART/BTUART/STUART sequence, + * they are re-ordered as: + * + * pxa910_device_uart1 - UART2 as FFUART + * pxa910_device_uart2 - UART3 as BTUART + * + * UART1 is not used by AP for the moment. + */ +PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22); +PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24); |
