diff options
Diffstat (limited to 'arch/arm/mach-integrator')
| -rw-r--r-- | arch/arm/mach-integrator/impd1.c | 48 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 23 |
2 files changed, 60 insertions, 11 deletions
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 3ce880729cff..38b0da300dd5 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -20,10 +20,13 @@ #include <linux/mm.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/amba/mmci.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> #include <linux/irqchip/arm-vic.h> +#include <linux/gpio/machine.h> #include <asm/sizes.h> #include "lm.h" @@ -52,6 +55,13 @@ void impd1_tweak_control(struct device *dev, u32 mask, u32 val) EXPORT_SYMBOL(impd1_tweak_control); /* + * MMC support + */ +static struct mmci_platform_data mmc_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +/* * CLCD support */ #define PANEL PROSPECTOR @@ -291,6 +301,7 @@ static struct impd1_device impd1_devs[] = { .offset = 0x00700000, .irq = { 7, 8 }, .id = 0x00041181, + .platform_data = &mmc_data, }, { .offset = 0x00800000, .irq = { 9 }, @@ -372,6 +383,43 @@ static int __init_refok impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); + + /* Add GPIO descriptor lookup table for the PL061 block */ + if (idev->offset == 0x00400000) { + struct gpiod_lookup_table *lookup; + char *chipname; + char *mmciname; + + lookup = devm_kzalloc(&dev->dev, + sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), + GFP_KERNEL); + chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); + mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id); + lookup->dev_id = mmciname; + /* + * Offsets on GPIO block 1: + * 3 = MMC WP (write protect) + * 4 = MMC CD (card detect) + * + * Offsets on GPIO block 2: + * 0 = Up key + * 1 = Down key + * 2 = Left key + * 3 = Right key + * 4 = Key lower left + * 5 = Key lower right + */ + /* We need the two MMCI GPIO entries */ + lookup->table[0].chip_label = chipname; + lookup->table[0].chip_hwnum = 3; + lookup->table[0].con_id = "wp"; + lookup->table[1].chip_label = chipname; + lookup->table[1].chip_hwnum = 4; + lookup->table[1].con_id = "cd"; + lookup->table[1].flags = GPIO_ACTIVE_LOW; + gpiod_add_lookup_table(lookup); + } + d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, irq1, irq2, idev->platform_data, idev->id, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 05e1f73a1e8d..c186a17c2cff 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void) { unsigned long flags; unsigned int temp; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pcibios_min_mem = 0x00100000; @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void) /* * Setup window 2 - PCI IO */ - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void) static void __init pci_v3_postinit(void) { unsigned int pci_cmd; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pci_cmd = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void) "interrupt: %d\n", ret); #endif - register_isa_ports(non_mem.start, io_mem.start, 0); + register_isa_ports(non_mem.start, io_address, 0); } /* @@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev) for_each_of_pci_range(&parser, &range) { if (!range.flags) { - of_pci_range_to_resource(&range, np, &conf_mem); + ret = of_pci_range_to_resource(&range, np, &conf_mem); conf_mem.name = "PCIv3 config"; } if (range.flags & IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &io_mem); + ret = of_pci_range_to_resource(&range, np, &io_mem); io_mem.name = "PCIv3 I/O"; } if ((range.flags & IORESOURCE_MEM) && !(range.flags & IORESOURCE_PREFETCH)) { non_mem_pci = range.pci_addr; non_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &non_mem); + ret = of_pci_range_to_resource(&range, np, &non_mem); non_mem.name = "PCIv3 non-prefetched mem"; } if ((range.flags & IORESOURCE_MEM) && (range.flags & IORESOURCE_PREFETCH)) { pre_mem_pci = range.pci_addr; pre_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &pre_mem); + ret = of_pci_range_to_resource(&range, np, &pre_mem); pre_mem.name = "PCIv3 prefetched mem"; } - } - if (!conf_mem.start || !io_mem.start || - !non_mem.start || !pre_mem.start) { - dev_err(&pdev->dev, "missing ranges in device node\n"); - return -EINVAL; + if (ret < 0) { + dev_err(&pdev->dev, "missing ranges in device node\n"); + return ret; + } } pci_v3.map_irq = of_irq_parse_and_map_pci; |
