20 files changed, 260 insertions, 758 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c0deacae778d..32d837d8eab9 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -192,6 +192,16 @@ config DA850_UI_RMII
 
 endchoice
 
+config DA850_WL12XX
+	bool "AM18x wl1271 daughter board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The wl1271 daughter card for AM18x EVMs is a combo wireless
+	  connectivity add-on card, based on the LS Research TiWi module with
+	  Texas Instruments' wl1271 solution.
+	  Say Y if you want to use a wl1271 expansion card connected to the
+	  AM18x EVM.
+
 config GPIO_PCA953X
 	default MACH_DAVINCI_DA850_EVM
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1ca2bb3..495e31306fc0 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o dma.o usb.o common.o sram.o aemif.o
+			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
@@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += gpio-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index db97ef2c6477..04a6c4e67b14 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -2,12 +2,12 @@ ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
 ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
 $(error Cannot enable DaVinci and DA8XX platforms concurrently)
 else
-   zreladdr-y	:= 0xc0008000
+   zreladdr-y	+= 0xc0008000
 params_phys-y	:= 0xc0000100
 initrd_phys-y	:= 0xc0800000
 endif
 else
-   zreladdr-y	:= 0x80008000
+   zreladdr-y	+= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
 endif
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6e41cb5baeb4..ec21663f8ddc 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -31,6 +31,8 @@
 #include <linux/input/tps6507x-ts.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/wl12xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,6 +51,9 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_WLAN_EN			GPIO_TO_PIN(6, 9)
+#define DA850_WLAN_IRQ			GPIO_TO_PIN(6, 10)
+
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1143,6 +1148,110 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+	static bool power_state;
+
+	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+	if (power_on == power_state)
+		return;
+	power_state = power_on;
+
+	if (power_on) {
+		/* Power up sequence required for wl127x devices */
+		gpio_set_value(DA850_WLAN_EN, 1);
+		usleep_range(15000, 15000);
+		gpio_set_value(DA850_WLAN_EN, 0);
+		usleep_range(1000, 1000);
+		gpio_set_value(DA850_WLAN_EN, 1);
+		msleep(70);
+	} else {
+		gpio_set_value(DA850_WLAN_EN, 0);
+	}
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+	.set_power	= wl12xx_set_power,
+	.wires		= 4,
+	.max_freq	= 25000000,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+			  MMC_CAP_POWER_OFF_CARD,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+	DA850_GPIO6_9, DA850_GPIO6_10,
+	-1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+	.irq			= -1,
+	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+	int ret;
+
+	ret = davinci_cfg_reg_list(da850_wl12xx_pins);
+	if (ret) {
+		pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
+	if (ret) {
+		pr_err("wl12xx/mmc registration failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
+	if (ret) {
+		pr_err("Could not request wl12xx enable gpio: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
+	if (ret) {
+		pr_err("Could not request wl12xx irq gpio: %d\n", ret);
+		goto free_wlan_en;
+	}
+
+	da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
+
+	ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
+	if (ret) {
+		pr_err("Could not set wl12xx data: %d\n", ret);
+		goto free_wlan_irq;
+	}
+
+	return 0;
+
+free_wlan_irq:
+	gpio_free(DA850_WLAN_IRQ);
+
+free_wlan_en:
+	gpio_free(DA850_WLAN_EN);
+
+exit:
+	return ret;
+}
+
+#else /* CONFIG_DA850_WL12XX */
+
+static __init int da850_wl12xx_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_DA850_WL12XX */
+
 #define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
 
 static __init void da850_evm_init(void)
@@ -1197,6 +1306,11 @@ static __init void da850_evm_init(void)
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 registration failed:"
 					" %d\n", ret);
+
+		ret = da850_wl12xx_init();
+		if (ret)
+			pr_warning("da850_evm_init: wl12xx initialization"
+				   " failed: %d\n", ret);
 	}
 
 	davinci_serial_init(&da850_evm_uart_config);
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f822fc40..a6bf5dcaef13 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
@@ -19,7 +20,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed5c541..b047f8702278 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
@@ -27,7 +28,7 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -535,6 +536,13 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* MMC/SD1 function */
+	MUX_CFG(DA850, MMCSD1_DAT_0,	18,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_1,	19,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_2,	19,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_3,	19,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CLK,	18,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CMD,	18,	16,	15,	2,	false)
 	/* EMIF2.5/EMIFA function */
 	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
 	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
@@ -593,6 +601,8 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, GPIO3_13,	7,	8,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_9,		13,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_10,	13,	20,	15,	8,	false)
 	MUX_CFG(DA850, GPIO6_13,	13,	8,	15,	8,	false)
 	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
 #endif
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2f7e719636f1..68def7188868 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -136,6 +136,7 @@ static struct edma_soc_info da830_edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+		.default_queue		= EVENTQ_1,
 	},
 	{
 		.n_channel		= 32,
@@ -160,6 +162,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
+		.default_queue		= EVENTQ_0,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 6162cae7f868..29b17f7d3a5f 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -80,6 +80,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= edma_tc_mapping,
 	.queue_priority_mapping	= edma_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9c9378..fe520d4167a2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 
@@ -30,6 +29,7 @@
 #include <mach/common.h>
 #include <mach/asp.h>
 #include <mach/spi.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -591,6 +591,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72d7d99..679e168dce34 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach/map.h>
@@ -34,7 +33,7 @@
 #include <mach/asp.h>
 #include <mach/keyscan.h>
 #include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c2716293..3470983aa343 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -26,6 +25,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -514,6 +514,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e711a2b8..0b68ed534f8e 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -27,6 +26,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -555,6 +555,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 6b9669869c46..da90103a313d 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -1435,12 +1435,11 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail1;
 		}
 
-		edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
 		if (!edma_cc[j]) {
 			status = -ENOMEM;
 			goto fail1;
 		}
-		memset(edma_cc[j], 0, sizeof(struct edma));
 
 		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
 							EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@ static int __init edma_probe(struct platform_device *pdev)
 							EDMA_MAX_CC);
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
-		if (!edma_cc[j]->default_queue)
-			edma_cc[j]->default_queue = EVENTQ_1;
 
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
deleted file mode 100644
index 3fa3e2867e19..000000000000
--- a/arch/arm/mach-davinci/gpio-tnetv107x.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Texas Instruments TNETV107X GPIO Controller
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/tnetv107x.h>
-
-struct tnetv107x_gpio_regs {
-	u32	idver;
-	u32	data_in[3];
-	u32	data_out[3];
-	u32	direction[3];
-	u32	enable[3];
-};
-
-#define gpio_reg_index(gpio)	((gpio) >> 5)
-#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
-
-#define gpio_reg_rmw(reg, mask, val)	\
-	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
-
-#define gpio_reg_set_bit(reg, gpio)	\
-	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
-
-#define gpio_reg_clear_bit(reg, gpio)	\
-	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
-
-#define gpio_reg_get_bit(reg, gpio)	\
-	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
-
-#define chip2controller(chip)		\
-	container_of(chip, struct davinci_gpio_controller, chip)
-
-#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
-
-static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
-
-static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_set_bit(regs->enable, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_clear_bit(regs->enable, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-}
-
-static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	gpio_reg_set_bit(regs->direction, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
-		unsigned offset, int value)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	if (value)
-		gpio_reg_set_bit(regs->data_out, gpio);
-	else
-		gpio_reg_clear_bit(regs->data_out, gpio);
-
-	gpio_reg_clear_bit(regs->direction, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-
-	return 0;
-}
-
-static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	int ret;
-
-	ret = gpio_reg_get_bit(regs->data_in, gpio);
-
-	return ret ? 1 : 0;
-}
-
-static void tnetv107x_gpio_set(struct gpio_chip *chip,
-		unsigned offset, int value)
-{
-	struct davinci_gpio_controller *ctlr = chip2controller(chip);
-	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
-	unsigned gpio = chip->base + offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ctlr->lock, flags);
-
-	if (value)
-		gpio_reg_set_bit(regs->data_out, gpio);
-	else
-		gpio_reg_clear_bit(regs->data_out, gpio);
-
-	spin_unlock_irqrestore(&ctlr->lock, flags);
-}
-
-static int __init tnetv107x_gpio_setup(void)
-{
-	int i, base;
-	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct tnetv107x_gpio_regs *regs;
-	struct davinci_gpio_controller *ctlr;
-
-	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
-		return 0;
-
-	ngpio = soc_info->gpio_num;
-	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
-		return -EINVAL;
-	}
-
-	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
-		ngpio = TNETV107X_N_GPIO;
-
-	regs = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!regs))
-		return -EINVAL;
-
-	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		ctlr = &chips[i];
-
-		ctlr->chip.label	= "tnetv107x";
-		ctlr->chip.can_sleep	= 0;
-		ctlr->chip.base		= base;
-		ctlr->chip.ngpio	= ngpio - base;
-		if (ctlr->chip.ngpio > 32)
-			ctlr->chip.ngpio = 32;
-
-		ctlr->chip.request		= tnetv107x_gpio_request;
-		ctlr->chip.free			= tnetv107x_gpio_free;
-		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
-		ctlr->chip.get			= tnetv107x_gpio_get;
-		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
-		ctlr->chip.set			= tnetv107x_gpio_set;
-
-		spin_lock_init(&ctlr->lock);
-
-		ctlr->regs	= regs;
-		ctlr->set_data	= &regs->data_out[i];
-		ctlr->clr_data	= &regs->data_out[i];
-		ctlr->in_data	= &regs->data_in[i];
-
-		gpiochip_add(&ctlr->chip);
-	}
-
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-	return 0;
-}
-pure_initcall(tnetv107x_gpio_setup);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
deleted file mode 100644
index cafbe13a82a5..000000000000
--- a/arch/arm/mach-davinci/gpio.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006-2007 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-
-#include <asm/mach/irq.h>
-
-struct davinci_gpio_regs {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-#define chip2controller(chip)	\
-	container_of(chip, struct davinci_gpio_controller, chip)
-
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static void __iomem *gpio_base;
-
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
-{
-	void __iomem *ptr;
-
-	if (gpio < 32 * 1)
-		ptr = gpio_base + 0x10;
-	else if (gpio < 32 * 2)
-		ptr = gpio_base + 0x38;
-	else if (gpio < 32 * 3)
-		ptr = gpio_base + 0x60;
-	else if (gpio < 32 * 4)
-		ptr = gpio_base + 0x88;
-	else if (gpio < 32 * 5)
-		ptr = gpio_base + 0xb0;
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
-{
-	struct davinci_gpio_regs __iomem *g;
-
-	g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
-
-	return g;
-}
-
-static int __init davinci_gpio_irq_setup(void);
-
-/*--------------------------------------------------------------------------*/
-
-/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
-static inline int __davinci_direction(struct gpio_chip *chip,
-			unsigned offset, bool out, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-	unsigned long flags;
-	u32 temp;
-	u32 mask = 1 << offset;
-
-	spin_lock_irqsave(&d->lock, flags);
-	temp = __raw_readl(&g->dir);
-	if (out) {
-		temp &= ~mask;
-		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	} else {
-		temp |= mask;
-	}
-	__raw_writel(temp, &g->dir);
-	spin_unlock_irqrestore(&d->lock, flags);
-
-	return 0;
-}
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	return __davinci_direction(chip, offset, false, 0);
-}
-
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	return __davinci_direction(chip, offset, true, value);
-}
-
-/*
- * Read the pin's value (works even if it's set up as output);
- * returns zero/nonzero.
- *
- * Note that changes are synched to the GPIO clock, so reading values back
- * right after you've set them may give old values.
- */
-static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	return (1 << offset) & __raw_readl(&g->in_data);
-}
-
-/*
- * Assuming the pin is muxed as a gpio output, set its output value.
- */
-static void
-davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-	struct davinci_gpio_regs __iomem *g = d->regs;
-
-	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
-}
-
-static int __init davinci_gpio_setup(void)
-{
-	int i, base;
-	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs *regs;
-
-	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
-		return 0;
-
-	/*
-	 * The gpio banks conceptually expose a segmented bitmap,
-	 * and "ngpio" is one more than the largest zero-based
-	 * bit index that's valid.
-	 */
-	ngpio = soc_info->gpio_num;
-	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
-		return -EINVAL;
-	}
-
-	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
-		ngpio = DAVINCI_N_GPIO;
-
-	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!gpio_base))
-		return -ENOMEM;
-
-	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		chips[i].chip.label = "DaVinci";
-
-		chips[i].chip.direction_input = davinci_direction_in;
-		chips[i].chip.get = davinci_gpio_get;
-		chips[i].chip.direction_output = davinci_direction_out;
-		chips[i].chip.set = davinci_gpio_set;
-
-		chips[i].chip.base = base;
-		chips[i].chip.ngpio = ngpio - base;
-		if (chips[i].chip.ngpio > 32)
-			chips[i].chip.ngpio = 32;
-
-		spin_lock_init(&chips[i].lock);
-
-		regs = gpio2regs(base);
-		chips[i].regs = regs;
-		chips[i].set_data = &regs->set_data;
-		chips[i].clr_data = &regs->clr_data;
-		chips[i].in_data = &regs->in_data;
-
-		gpiochip_add(&chips[i].chip);
-	}
-
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
-	davinci_gpio_irq_setup();
-	return 0;
-}
-pure_initcall(davinci_gpio_setup);
-
-/*--------------------------------------------------------------------------*/
-/*
- * We expect irqs will normally be set up as input pins, but they can also be
- * used as output pins ... which is convenient for testing.
- *
- * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead.
- *
- * All those INTC hookups (direct, plus several IRQ banks) can also
- * serve as EDMA event triggers.
- */
-
-static void gpio_irq_disable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	__raw_writel(mask, &g->clr_falling);
-	__raw_writel(mask, &g->clr_rising);
-}
-
-static void gpio_irq_enable(struct irq_data *d)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-	unsigned status = irqd_get_trigger_type(d);
-
-	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-	if (!status)
-		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-
-	if (status & IRQ_TYPE_EDGE_FALLING)
-		__raw_writel(mask, &g->set_falling);
-	if (status & IRQ_TYPE_EDGE_RISING)
-		__raw_writel(mask, &g->set_rising);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_enable	= gpio_irq_enable,
-	.irq_disable	= gpio_irq_disable,
-	.irq_set_type	= gpio_irq_type,
-	.flags		= IRQCHIP_SET_TYPE_MASKED,
-};
-
-static void
-gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
-	struct davinci_gpio_regs __iomem *g;
-	u32 mask = 0xffff;
-	struct davinci_gpio_controller *d;
-
-	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
-	g = (struct davinci_gpio_regs __iomem *)d->regs;
-
-	/* we only care about one bank */
-	if (irq & 1)
-		mask <<= 16;
-
-	/* temporarily mask (level sensitive) parent IRQ */
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-	while (1) {
-		u32		status;
-		int		n;
-		int		res;
-
-		/* ack any irqs */
-		status = __raw_readl(&g->intstat) & mask;
-		if (!status)
-			break;
-		__raw_writel(status, &g->intstat);
-
-		/* now demux them to the right lowlevel handler */
-		n = d->irq_base;
-		if (irq & 1) {
-			n += 16;
-			status >>= 16;
-		}
-
-		while (status) {
-			res = ffs(status);
-			n += res;
-			generic_handle_irq(n - 1);
-			status >>= res;
-		}
-	}
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-	/* now it may re-trigger */
-}
-
-static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_gpio_controller *d = chip2controller(chip);
-
-	if (d->irq_base >= 0)
-		return d->irq_base + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	/* NOTE:  we assume for now that only irqs in the first gpio_chip
-	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
-	 */
-	if (offset < soc_info->gpio_unbanked)
-		return soc_info->gpio_irq + offset;
-	else
-		return -ENODEV;
-}
-
-static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
-{
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
-	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		return -EINVAL;
-
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
-
-	return 0;
-}
-
-/*
- * NOTE:  for suspend/resume, probably best to make a platform_device with
- * suspend_late/resume_resume calls hooking into results of the set_wake()
- * calls ... so if no gpios are wakeup events the clock can be disabled,
- * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * (dm6446) can be set appropriately for GPIOV33 pins.
- */
-
-static int __init davinci_gpio_irq_setup(void)
-{
-	unsigned	gpio, irq, bank;
-	struct clk	*clk;
-	u32		binten = 0;
-	unsigned	ngpio, bank_irq;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs	__iomem *g;
-
-	ngpio = soc_info->gpio_num;
-
-	bank_irq = soc_info->gpio_irq;
-	if (bank_irq == 0) {
-		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
-		return -EINVAL;
-	}
-
-	clk = clk_get(NULL, "gpio");
-	if (IS_ERR(clk)) {
-		printk(KERN_ERR "Error %ld getting gpio clock?\n",
-		       PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-	clk_enable(clk);
-
-	/* Arrange gpio_to_irq() support, handling either direct IRQs or
-	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
-	 * IRQs, while the others use banked IRQs, would need some setup
-	 * tweaks to recognize hardware which can do that.
-	 */
-	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
-		chips[bank].chip.to_irq = gpio_to_irq_banked;
-		chips[bank].irq_base = soc_info->gpio_unbanked
-			? -EINVAL
-			: (soc_info->intc_irq_num + gpio);
-	}
-
-	/*
-	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
-	 * controller only handling trigger modes.  We currently assume no
-	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
-	 */
-	if (soc_info->gpio_unbanked) {
-		static struct irq_chip gpio_irqchip_unbanked;
-
-		/* pass "bank 0" GPIO IRQs to AINTC */
-		chips[0].chip.to_irq = gpio_to_irq_unbanked;
-		binten = BIT(0);
-
-		/* AINTC handles mask/unmask; GPIO handles triggering */
-		irq = bank_irq;
-		gpio_irqchip_unbanked = *irq_get_chip(irq);
-		gpio_irqchip_unbanked.name = "GPIO-AINTC";
-		gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
-
-		/* default trigger: both edges */
-		g = gpio2regs(0);
-		__raw_writel(~0, &g->set_falling);
-		__raw_writel(~0, &g->set_rising);
-
-		/* set the direct IRQs up to use that irqchip */
-		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
-			irq_set_chip(irq, &gpio_irqchip_unbanked);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
-		}
-
-		goto done;
-	}
-
-	/*
-	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
-	 * then chain through our own handler.
-	 */
-	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
-			gpio < ngpio;
-			bank++, bank_irq++) {
-		unsigned		i;
-
-		/* disabled by default, enabled only as needed */
-		g = gpio2regs(gpio);
-		__raw_writel(~0, &g->clr_falling);
-		__raw_writel(~0, &g->clr_rising);
-
-		/* set up all irqs in this bank */
-		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-
-		/*
-		 * Each chip handles 32 gpios, and each irq bank consists of 16
-		 * gpio irqs. Pass the irq bank's corresponding controller to
-		 * the chained irq handler.
-		 */
-		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
-
-		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
-			irq_set_chip(irq, &gpio_irqchip);
-			irq_set_chip_data(irq, (__force void *)g);
-			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
-			irq_set_handler(irq, handle_simple_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-
-		binten |= BIT(bank);
-	}
-
-done:
-	/* BINTEN -- per-bank interrupt enable. genirq would also let these
-	 * bits be set/cleared dynamically.
-	 */
-	__raw_writel(binten, gpio_base + 0x08);
-
-	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
-
-	return 0;
-}
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 000000000000..1fdd1fd35448
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_DAVINCI_GPIO_H
+#define	__DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+	GPIO_TYPE_DAVINCI = 0,
+	GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+	int index = gpio / 32;
+
+	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+		return NULL;
+
+	return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece126c2bf..fbaae4772b91 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,10 @@
 #ifndef	__DAVINCI_GPIO_H
 #define	__DAVINCI_GPIO_H
 
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
 #include <asm-generic/gpio.h>
 
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
 
 /*
  * The get/set/clear functions will inline when called with constant
@@ -147,11 +77,6 @@ static inline int gpio_cansleep(unsigned gpio)
 		return __gpio_cansleep(gpio);
 }
 
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index d4f1e9675069..5ba6b22ce338 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -12,6 +12,9 @@ struct davinci_mmc_config {
 	/* get_cd()/get_wp() may sleep */
 	int	(*get_cd)(int module);
 	int	(*get_ro)(int module);
+
+	void	(*set_power)(int module, bool on);
+
 	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
 	u8	wires;
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 5d4e0fed828a..a7e92fca32e6 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -857,6 +857,14 @@ enum davinci_da850_index {
 	DA850_MMCSD0_CLK,
 	DA850_MMCSD0_CMD,
 
+	/* MMC/SD1 function */
+	DA850_MMCSD1_DAT_0,
+	DA850_MMCSD1_DAT_1,
+	DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3,
+	DA850_MMCSD1_CLK,
+	DA850_MMCSD1_CMD,
+
 	/* EMIF2.5/EMIFA function */
 	DA850_EMA_D_7,
 	DA850_EMA_D_6,
@@ -916,6 +924,8 @@ enum davinci_da850_index {
 	DA850_GPIO3_13,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
+	DA850_GPIO6_9,
+	DA850_GPIO6_10,
 	DA850_GPIO6_13,
 	DA850_RTC_ALARM,
 };
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd892a6..409bb869c7c7 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -27,9 +28,9 @@
 #include <mach/psc.h>
 #include <mach/cp_intc.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"