diff options
Diffstat (limited to 'arch/arm/boot')
72 files changed, 1977 insertions, 580 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6a3d9a6c4497..91bd5bd62857 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,6 +177,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb +dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \ + pxa910-dkb.dtb \ + mmp2-brownstone.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx1-ads.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 901739fcb85a..5c42d259fa68 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -80,3 +80,7 @@ status = "okay"; }; }; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index befe713b3e1b..acd37057bca9 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -435,7 +435,7 @@ }; rtc: rtc@44e3e000 { - compatible = "ti,da830-rtc"; + compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <75 76>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d42d7865dd53..b62a1cd776cd 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -843,6 +843,8 @@ maximum-speed = "high-speed"; dr_mode = "otg"; status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -865,6 +867,8 @@ maximum-speed = "high-speed"; dr_mode = "otg"; status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 87aa4f3b8b3d..53bbfc90b26a 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -100,7 +100,7 @@ }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi"; label = "lcd"; pinctrl-names = "default"; @@ -112,11 +112,11 @@ clock-frequency = <9000000>; hactive = <480>; vactive = <272>; - hfront-porch = <8>; - hback-porch = <43>; - hsync-len = <4>; - vback-porch = <12>; - vfront-porch = <4>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vfront-porch = <2>; + vback-porch = <2>; vsync-len = <10>; hsync-active = <0>; vsync-active = <0>; @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 1466580be295..70b1943a86b1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -203,27 +203,3 @@ compatible = "linux,spdif-dir"; }; }; - -&pinctrl { - /* - * These pins might be muxed as I2S by - * the bootloader, but it conflicts - * with the real I2S pins that are - * muxed using i2s_pins. We must mux - * those pins to a function other than - * I2S. - */ - pinctrl-0 = <&hog_pins1 &hog_pins2>; - pinctrl-names = "default"; - - hog_pins1: hog-pins1 { - marvell,pins = "mpp6", "mpp8", "mpp10", - "mpp12", "mpp13"; - marvell,function = "gpio"; - }; - - hog_pins2: hog-pins2 { - marvell,pins = "mpp5", "mpp7", "mpp9"; - marvell,function = "gpo"; - }; -}; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 9721e55384ce..50096d3427eb 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -14,6 +14,7 @@ #include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) @@ -348,6 +349,12 @@ #clock-cells = <1>; }; + usbcluster: usb-cluster@18400 { + compatible = "marvell,armada-375-usb-cluster"; + reg = <0x18400 0x4>; + #phy-cells = <1>; + }; + mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; reg = <0x20000 0x100>, <0x20180 0x20>; @@ -398,6 +405,8 @@ reg = <0x50000 0x500>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 18>; + phys = <&usbcluster PHY_TYPE_USB2>; + phy-names = "usb"; status = "disabled"; }; @@ -414,6 +423,8 @@ reg = <0x58000 0x20000>,<0x5b880 0x80>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 16>; + phys = <&usbcluster PHY_TYPE_USB3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index b5b84006469e..9198b719d0ef 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -9,12 +9,12 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index cb100b03a362..dd1313cbc314 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -956,6 +956,14 @@ }; }; + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; @@ -966,6 +974,12 @@ atmel,idle-halt; status = "disabled"; }; + + gpbr: syscon@fffffd50 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd50 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index a81aab4281a7..cdb9ed612109 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -828,12 +828,26 @@ clocks = <&mck>; }; + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; + status = "disabled"; + }; + watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + gpbr: syscon@fffffd50 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd50 0x10>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 653e4395b7cb..e8c6c600a5b6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -922,6 +922,27 @@ pinctrl-0 = <&pinctrl_can_rx_tx>; clocks = <&can_clk>; clock-names = "can_clk"; + }; + + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; + status = "disabled"; + }; + + rtc@fffffd50 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd50 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; + status = "disabled"; + }; + + gpbr: syscon@fffffd60 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd60 0x50>; status = "disabled"; }; }; @@ -932,6 +953,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index d2919108e92d..dfaacb113f2e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -112,9 +112,23 @@ }; }; + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + watchdog@fffffd40 { status = "okay"; }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index d3f65130a1f8..2a8da8a884b4 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -492,6 +492,27 @@ }; }; + isi { + pinctrl_isi: isi-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */ + AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */ + AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */ + AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */ + AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */ + AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>; + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -940,6 +961,13 @@ status = "disabled"; }; + trng@fffcc000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfffcc000 0x4000>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; @@ -1028,6 +1056,17 @@ }; }; + isi@fffb4000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xfffb4000 0x4000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi>; + status = "disabled"; + }; + pwm0: pwm@fffb8000 { compatible = "atmel,at91sam9rl-pwm"; reg = <0xfffb8000 0x300>; @@ -1192,12 +1231,26 @@ }; }; + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + rtc@fffffdb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffdb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + gpbr: syscon@fffffd60 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd60 0x10>; + status = "disabled"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index d8dd22651090..33ce7ca2c404 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -161,6 +161,15 @@ pinctrl-0 = <&pinctrl_pwm_leds>; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + gpbr: syscon@fffffd60 { + status = "okay"; + }; + rtc@fffffdb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index f0b4352650ed..72424371413e 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -1059,6 +1059,27 @@ clocks = <&slow_rc_osc &slow_osc>; }; }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + gpbr: syscon@fffffd60 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd60 0x10>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f3bb2dd6269e..d2d8e94e0aa2 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -102,7 +102,7 @@ twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; - interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 28e7e2060c33..a98ac1bd8f65 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -65,6 +65,8 @@ }; &sdhci2 { + broken-cd; + bus-width = <8>; non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 35253c947a7c..e2f61f27944e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -83,7 +83,8 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; status = "disabled"; }; @@ -348,36 +349,6 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; - - gpio4: gpio@5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio@c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control@ea0000 { @@ -466,6 +437,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c@7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -516,6 +502,21 @@ status = "disabled"; }; + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller@d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 736092b1a535..ad4118f7e1a6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -304,7 +304,7 @@ /* VDD_GPU - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <12500000>; + regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; }; @@ -313,7 +313,7 @@ /* CORE_VDD */ regulator-name = "smps7"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1030000>; + regulator-max-microvolt = <1060000>; regulator-always-on; regulator-boot-on; }; @@ -499,23 +499,23 @@ }; partition@5 { label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00010000>; + reg = <0x00140000 0x00080000>; }; partition@6 { label = "QSPI.u-boot-env"; - reg = <0x00150000 0x00010000>; + reg = <0x001c0000 0x00010000>; }; partition@7 { label = "QSPI.u-boot-env.backup1"; - reg = <0x00160000 0x0010000>; + reg = <0x001d0000 0x0010000>; }; partition@8 { label = "QSPI.kernel"; - reg = <0x00170000 0x0800000>; + reg = <0x001e0000 0x0800000>; }; partition@9 { label = "QSPI.file-system"; - reg = <0x00970000 0x01690000>; + reg = <0x009e0000 0x01620000>; }; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 63bf99be1762..63f8b007bdc5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -742,7 +742,7 @@ }; wdt2: wdt@4ae14000 { - compatible = "ti,omap4-wdt"; + compatible = "ti,omap3-wdt"; reg = <0x4ae14000 0x80>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "wd_timer2"; @@ -1257,6 +1257,8 @@ tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1278,6 +1280,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -1299,6 +1303,8 @@ tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index afc74fd4bb5e..89085d066c65 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -160,7 +160,7 @@ /* VDD_CORE */ regulator-name = "smps2"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1030000>; + regulator-max-microvolt = <1060000>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 2c05b3f017fa..4bdcbd61ce47 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1042,7 +1042,7 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; - reg = <0x01a4>; + reg = <0x0164>; }; mlb_clk: mlb_clk { @@ -1084,14 +1084,14 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; - reg = <0x01d0>; + reg = <0x0168>; }; video2_dpll_clk_mux: video2_dpll_clk_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; - reg = <0x01d4>; + reg = <0x016c>; }; wkupaon_iclk_mux: wkupaon_iclk_mux { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 242ddda0a8cd..22465494b796 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -311,12 +311,13 @@ adc: adc@126C0000 { compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2"; - reg = <0x126C0000 0x100>, <0x10020718 0x4>; + reg = <0x126C0000 0x100>; interrupts = <0 137 0>; clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 2e9f1f7be77b..93b70402e943 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -108,13 +108,14 @@ adc: adc@126C0000 { compatible = "samsung,exynos-adc-v1"; - reg = <0x126C0000 0x100>, <0x10020718 0x4>; + reg = <0x126C0000 0x100>; interrupt-parent = <&combiner>; interrupts = <10 3>; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index d45a07ea3402..d75c89d7666a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -736,7 +736,7 @@ dp_phy: video-phy@10040720 { compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040720 4>; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; @@ -754,12 +754,13 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>, <0x10040718 0x4>; + reg = <0x12D10000 0x100>; interrupts = <0 106 0>; clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index aa7a7d727a7e..db2c1c4cd900 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -372,3 +372,7 @@ &usbdrd_dwc3_1 { dr_mode = "host"; }; + +&cci { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 90bf4011e319..6d38f8bfd0e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -120,7 +120,7 @@ }; }; - cci@10d20000 { + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; #size-cells = <1>; @@ -503,8 +503,8 @@ }; dp_phy: video-phy@10040728 { - compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040728 4>; + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; @@ -541,12 +541,13 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>, <0x10040720 0x4>; + reg = <0x12D10000 0x100>; interrupts = <0 106 0>; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 93b6c909e991..238814596a87 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -190,6 +190,12 @@ clock-frequency = <168000000>; }; + clk_375m: clk_375m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <375000000>; + }; + soc { /* It's a 32-bit SoC. */ #address-cells = <1>; @@ -264,4 +270,715 @@ }; }; + + etb@0,e3c42000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3c42000 0 0x1000>; + + coresight-default-sink; + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb0_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator0_out_port0>; + }; + }; + }; + + etb@0,e3c82000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3c82000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb1_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator1_out_port0>; + }; + }; + }; + + etb@0,e3cc2000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3cc2000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb2_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator2_out_port0>; + }; + }; + }; + + etb@0,e3d02000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3d02000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb3_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator3_out_port0>; + }; + }; + }; + + tpiu@0,e3c05000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xe3c05000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&funnel4_out_port0>; + }; + }; + }; + + replicator0 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator0_out_port0: endpoint { + remote-endpoint = <&etb0_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator0_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port0>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator0_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel0_out_port0>; + }; + }; + }; + }; + + replicator1 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator1_out_port0: endpoint { + remote-endpoint = <&etb1_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator1_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port1>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator1_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out_port0>; + }; + }; + }; + }; + + replicator2 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator2_out_port0: endpoint { + remote-endpoint = <&etb2_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator2_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port2>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator2_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel2_out_port0>; + }; + }; + }; + }; + + replicator3 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator3_out_port0: endpoint { + remote-endpoint = <&etb3_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator3_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port3>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator3_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel3_out_port0>; + }; + }; + }; + }; + + funnel@0,e3c41000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c41000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel0_out_port0: endpoint { + remote-endpoint = + <&replicator0_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel0_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel0_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel0_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm2_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel0_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm3_out_port>; + }; + }; + }; + }; + + funnel@0,e3c81000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c81000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel1_out_port0: endpoint { + remote-endpoint = + <&replicator1_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel1_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm4_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel1_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm5_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel1_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm6_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel1_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm7_out_port>; + }; + }; + }; + }; + + funnel@0,e3cc1000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3cc1000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel2_out_port0: endpoint { + remote-endpoint = + <&replicator2_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel2_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm8_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel2_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm9_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel2_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm10_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel2_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm11_out_port>; + }; + }; + }; + }; + + funnel@0,e3d01000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3d01000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel3_out_port0: endpoint { + remote-endpoint = + <&replicator3_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel3_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm12_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel3_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm13_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel3_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm14_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel3_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm15_out_port>; + }; + }; + }; + }; + + funnel@0,e3c04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c04000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel4_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel4_in_port0: endpoint { + slave-mode; + remote-endpoint = + <&replicator0_out_port1>; + }; + }; + + port@2 { + reg = <1>; + funnel4_in_port1: endpoint { + slave-mode; + remote-endpoint = + <&replicator1_out_port1>; + }; + }; + + port@3 { + reg = <2>; + funnel4_in_port2: endpoint { + slave-mode; + remote-endpoint = + <&replicator2_out_port1>; + }; + }; + + port@4 { + reg = <3>; + funnel4_in_port3: endpoint { + slave-mode; + remote-endpoint = + <&replicator3_out_port1>; + }; + }; + }; + }; + + ptm@0,e3c7c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7c000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; + + ptm@0,e3c7d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7d000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; + }; + }; + + ptm@0,e3c7e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7e000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + port { + ptm2_out_port: endpoint { + remote-endpoint = <&funnel0_in_port2>; + }; + }; + }; + + ptm@0,e3c7f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7f000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + port { + ptm3_out_port: endpoint { + remote-endpoint = <&funnel0_in_port3>; + }; + }; + }; + + ptm@0,e3cbc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbc000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU4>; + port { + ptm4_out_port: endpoint { + remote-endpoint = <&funnel1_in_port0>; + }; + }; + }; + + ptm@0,e3cbd000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbd000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU5>; + port { + ptm5_out_port: endpoint { + remote-endpoint = <&funnel1_in_port1>; + }; + }; + }; + + ptm@0,e3cbe000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbe000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU6>; + port { + ptm6_out_port: endpoint { + remote-endpoint = <&funnel1_in_port2>; + }; + }; + }; + + ptm@0,e3cbf000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbf000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU7>; + port { + ptm7_out_port: endpoint { + remote-endpoint = <&funnel1_in_port3>; + }; + }; + }; + + ptm@0,e3cfc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfc000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU8>; + port { + ptm8_out_port: endpoint { + remote-endpoint = <&funnel2_in_port0>; + }; + }; + }; + + ptm@0,e3cfd000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfd000 0 0x1000>; + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU9>; + port { + ptm9_out_port: endpoint { + remote-endpoint = <&funnel2_in_port1>; + }; + }; + }; + + ptm@0,e3cfe000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfe000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU10>; + port { + ptm10_out_port: endpoint { + remote-endpoint = <&funnel2_in_port2>; + }; + }; + }; + + ptm@0,e3cff000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cff000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU11>; + port { + ptm11_out_port: endpoint { + remote-endpoint = <&funnel2_in_port3>; + }; + }; + }; + + ptm@0,e3d3c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3c000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU12>; + port { + ptm12_out_port: endpoint { + remote-endpoint = <&funnel3_in_port0>; + }; + }; + }; + + ptm@0,e3d3d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3d000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU13>; + port { + ptm13_out_port: endpoint { + remote-endpoint = <&funnel3_in_port1>; + }; + }; + }; + + ptm@0,e3d3e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3e000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU14>; + port { + ptm14_out_port: endpoint { + remote-endpoint = <&funnel3_in_port2>; + }; + }; + }; + + ptm@0,e3d3f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3f000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU15>; + port { + ptm15_out_port: endpoint { + remote-endpoint = <&funnel3_in_port3>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..e4d3aecc4ed2 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -162,7 +162,7 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; + clocks = <&clks 78>, <&clks 78>; clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; @@ -369,7 +369,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fa0000 0x4000>; - clocks = <&clks 106>, <&clks 36>; + clocks = <&clks 106>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <36>; }; @@ -388,7 +388,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fa8000 0x4000>; - clocks = <&clks 107>, <&clks 36>; + clocks = <&clks 107>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <41>; }; @@ -429,7 +429,7 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; reg = <0x53fc8000 0x4000>; - clocks = <&clks 108>, <&clks 36>; + clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <42>; }; @@ -476,7 +476,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fe0000 0x4000>; - clocks = <&clks 105>, <&clks 36>; + clocks = <&clks 105>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <26>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7f1cee..2109d0763c1b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -335,8 +335,8 @@ vpu: vpu@02040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; - interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 1e6e5cc1c14c..8c1febd7e3f2 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -159,13 +159,28 @@ pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>; phy-mode = "rgmii"; + phy-handle = <ðphy1>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + reg = <0>; + }; + + ethphy2: ethernet-phy@1 { + reg = <1>; + }; + }; }; &fec2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii"; + phy-handle = <ðphy2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 657da14cb4b5..c70bb27ac65a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -142,6 +142,7 @@ scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; }; clockgen: clocking@1ee1000 { diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 03bcff87bd27..b67ede515bcd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -143,5 +143,12 @@ #size-cells = <0>; status = "disabled"; }; + + ir_receiver: ir-receiver@c8100480 { + compatible= "amlogic,meson6-ir"; + reg = <0xc8100480 0x20>; + interrupts = <0 15 1>; + status = "disabled"; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 7f70a39459f6..350208c5e1ed 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "mmp2.dtsi" +#include "mmp2.dtsi" / { model = "Marvell MMP2 Brownstone Development Board"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 4e8b08c628c7..766bbb8495b6 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,mmp2.h> / { aliases { @@ -135,6 +136,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4030000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; status = "disabled"; }; @@ -142,6 +145,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; status = "disabled"; }; @@ -149,6 +154,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <24>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; status = "disabled"; }; @@ -156,6 +163,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4016000 0x1000>; interrupts = <46>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; status = "disabled"; }; @@ -168,6 +177,8 @@ #gpio-cells = <2>; interrupts = <49>; interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; interrupt-controller; #interrupt-cells = <1>; ranges; @@ -201,6 +212,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; #address-cells = <1>; #size-cells = <0>; mrvl,i2c-fast-mode; @@ -211,6 +224,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; status = "disabled"; }; @@ -220,8 +235,20 @@ interrupts = <1 0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&intcmux5>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 05eca2e4430f..6b36ede58488 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -48,22 +48,22 @@ gpmc,device-width = <1>; gpmc,cycle2cycle-samecsen = <1>; gpmc,cycle2cycle-diffcsen = <1>; - gpmc,cs-on-ns = <7>; - gpmc,cs-rd-off-ns = <233>; - gpmc,cs-wr-off-ns = <233>; - gpmc,adv-on-ns = <22>; - gpmc,adv-rd-off-ns = <60>; - gpmc,adv-wr-off-ns = <60>; - gpmc,oe-on-ns = <67>; - gpmc,oe-off-ns = <210>; - gpmc,we-on-ns = <67>; - gpmc,we-off-ns = <210>; - gpmc,rd-cycle-ns = <233>; - gpmc,wr-cycle-ns = <233>; - gpmc,access-ns = <233>; - gpmc,page-burst-access-ns = <30>; - gpmc,bus-turnaround-ns = <30>; - gpmc,cycle2cycle-delay-ns = <30>; + gpmc,cs-on-ns = <6>; + gpmc,cs-rd-off-ns = <187>; + gpmc,cs-wr-off-ns = <187>; + gpmc,adv-on-ns = <18>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <60>; + gpmc,oe-off-ns = <169>; + gpmc,we-on-ns = <66>; + gpmc,we-off-ns = <169>; + gpmc,rd-cycle-ns = <187>; + gpmc,wr-cycle-ns = <187>; + gpmc,access-ns = <187>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <24>; + gpmc,cycle2cycle-delay-ns = <24>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 06a8aec4e6ea..25f7b0a22114 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -145,6 +145,34 @@ }; }; }; + + etb@5401b000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x5401b000 0x1000>; + + coresight-default-sink; + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&etm_out>; + }; + }; + }; + + etm@54010000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x54010000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; }; &omap3_pmx_wkup { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a9aae88b74f5..c792391ef090 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -140,6 +140,34 @@ }; }; }; + + etb@540000000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x5401b000 0x1000>; + + coresight-default-sink; + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&etm_out>; + }; + }; + }; + + etm@54010000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x54010000 0x1000>; + + clocks = <&emu_src_ck>; + clock-names = "apb_pclk"; + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; }; &omap3_pmx_wkup { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 53f3ca064140..b550c41b46f1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -700,11 +700,9 @@ }; }; + /* Ethernet is on some early development boards and qemu */ ethernet@gpmc { compatible = "smsc,lan91c94"; - - status = "disabled"; - interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts index e762facb3fa4..0a988b3fb248 100644 --- a/arch/arm/boot/dts/pxa168-aspenite.dts +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "pxa168.dtsi" +#include "pxa168.dtsi" / { model = "Marvell PXA168 Aspenite Development Board"; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 975dad21ac38..b899e25cbb1b 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,pxa168.h> / { aliases { @@ -59,6 +60,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks PXA168_CLK_UART0>; + resets = <&soc_clocks PXA168_CLK_UART0>; status = "disabled"; }; @@ -66,6 +69,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks PXA168_CLK_UART1>; + resets = <&soc_clocks PXA168_CLK_UART1>; status = "disabled"; }; @@ -73,6 +78,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4026000 0x1000>; interrupts = <29>; + clocks = <&soc_clocks PXA168_CLK_UART2>; + resets = <&soc_clocks PXA168_CLK_UART2>; status = "disabled"; }; @@ -84,6 +91,8 @@ gpio-controller; #gpio-cells = <2>; interrupts = <49>; + clocks = <&soc_clocks PXA168_CLK_GPIO>; + resets = <&soc_clocks PXA168_CLK_GPIO>; interrupt-names = "gpio_mux"; interrupt-controller; #interrupt-cells = <1>; @@ -110,6 +119,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks PXA168_CLK_TWSI0>; + resets = <&soc_clocks PXA168_CLK_TWSI0>; mrvl,i2c-fast-mode; status = "disabled"; }; @@ -118,6 +129,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; + clocks = <&soc_clocks PXA168_CLK_TWSI1>; + resets = <&soc_clocks PXA168_CLK_TWSI1>; status = "disabled"; }; @@ -126,8 +139,20 @@ reg = <0xd4010000 0x1000>; interrupts = <5 6>; interrupt-names = "rtc 1Hz", "rtc alarm"; + clocks = <&soc_clocks PXA168_CLK_RTC>; + resets = <&soc_clocks PXA168_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,pxa168-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index 595492aa5053..c82f2810ec73 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "pxa910.dtsi" +#include "pxa910.dtsi" / { model = "Marvell PXA910 DKB Development Board"; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 0247c622f580..0868f6729be1 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/marvell,pxa910.h> / { aliases { @@ -71,6 +72,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks PXA910_CLK_UART0>; + resets = <&soc_clocks PXA910_CLK_UART0>; status = "disabled"; }; @@ -78,6 +81,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks PXA910_CLK_UART1>; + resets = <&soc_clocks PXA910_CLK_UART1>; status = "disabled"; }; @@ -85,6 +90,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4036000 0x1000>; interrupts = <59>; + clocks = <&soc_clocks PXA910_CLK_UART2>; + resets = <&soc_clocks PXA910_CLK_UART2>; status = "disabled"; }; @@ -97,6 +104,8 @@ #gpio-cells = <2>; interrupts = <49>; interrupt-names = "gpio_mux"; + clocks = <&soc_clocks PXA910_CLK_GPIO>; + resets = <&soc_clocks PXA910_CLK_GPIO>; interrupt-controller; #interrupt-cells = <1>; ranges; @@ -124,6 +133,8 @@ #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks PXA910_CLK_TWSI0>; + resets = <&soc_clocks PXA910_CLK_TWSI0>; mrvl,i2c-fast-mode; status = "disabled"; }; @@ -134,6 +145,8 @@ #size-cells = <0>; reg = <0xd4037000 0x1000>; interrupts = <54>; + clocks = <&soc_clocks PXA910_CLK_TWSI1>; + resets = <&soc_clocks PXA910_CLK_TWSI1>; status = "disabled"; }; @@ -142,8 +155,21 @@ reg = <0xd4010000 0x1000>; interrupts = <5 6>; interrupt-names = "rtc 1Hz", "rtc alarm"; + clocks = <&soc_clocks PXA910_CLK_RTC>; + resets = <&soc_clocks PXA910_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,pxa910-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>, + <0xd403b000 0x1000>; + reg-names = "mpmu", "apmu", "apbc", "apbcp"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 3e067dd65d0c..6194d673e80b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -155,6 +155,15 @@ }; &pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + backlight { bl_en: bl-en { rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -173,6 +182,27 @@ }; }; + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on EVB board so bump up to 8ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 49c10d33df30..77e03655aca3 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -176,7 +176,7 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", - "MICBIAS", "IN1L", + "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index e0157b0f075c..b94995d1889f 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -9,12 +9,12 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. @@ -45,6 +45,7 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -302,6 +303,15 @@ #size-cells = <1>; ranges; + dma1: dma-controller@f0004000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0004000 0x200>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; @@ -309,6 +319,15 @@ clock-names = "ddrck", "mpddr"; }; + dma0: dma-controller@f0014000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0014000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + pmc: pmc@f0018000 { compatible = "atmel,sama5d3-pmc"; reg = <0xf0018000 0x120>; @@ -761,6 +780,10 @@ compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(0))>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>; status = "disabled"; @@ -776,6 +799,13 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xf8010000 0x100>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(10))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&spi0_clk>; @@ -787,6 +817,13 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x4000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(2))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; @@ -817,7 +854,14 @@ i2c2: i2c@f8024000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8024000 0x4000>; - interrupts = <34 4 6>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(6))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; @@ -830,6 +874,10 @@ compatible = "atmel,hsmci"; reg = <0xfc000000 0x600>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(1))>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; status = "disabled"; @@ -843,6 +891,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(16))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; clocks = <&usart2_clk>; @@ -854,6 +909,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&usart3_clk>; @@ -865,6 +927,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc010000 0x100>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart4>; clocks = <&usart4_clk>; @@ -939,7 +1008,7 @@ pit: timer@fc068630 { compatible = "atmel,at91sam9260-pit"; - reg = <0xfc068630 0xf>; + reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&h32ck>; }; diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi index e0799966bc25..52dba2e39c71 100644 --- a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi @@ -16,31 +16,31 @@ uart0 { uart0_default_mux: uart0_mux { default_mux { - ste,function = "u0"; - ste,pins = "u0_a_1"; + function = "u0"; + groups = "u0_a_1"; }; }; uart0_default_mode: uart0_default { default_cfg1 { - ste,pins = "GPIO0", "GPIO2"; + pins = "GPIO0", "GPIO2"; ste,config = <&in_pu>; }; default_cfg2 { - ste,pins = "GPIO1", "GPIO3"; + pins = "GPIO1", "GPIO3"; ste,config = <&out_hi>; }; }; uart0_sleep_mode: uart0_sleep { sleep_cfg1 { - ste,pins = "GPIO0", "GPIO2"; + pins = "GPIO0", "GPIO2"; ste,config = <&slpm_in_pu>; }; sleep_cfg2 { - ste,pins = "GPIO1", "GPIO3"; + pins = "GPIO1", "GPIO3"; ste,config = <&slpm_out_hi>; }; }; @@ -49,29 +49,29 @@ uart2 { uart2_default_mode: uart2_default { default_mux { - ste,function = "u2"; - ste,pins = "u2txrx_a_1"; + function = "u2"; + groups = "u2txrx_a_1"; }; default_cfg1 { - ste,pins = "GPIO120"; + pins = "GPIO120"; ste,config = <&in_pu>; }; default_cfg2 { - ste,pins = "GPIO121"; + pins = "GPIO121"; ste,config = <&out_hi>; }; }; uart2_sleep_mode: uart2_sleep { sleep_cfg1 { - ste,pins = "GPIO120"; + pins = "GPIO120"; ste,config = <&slpm_in_pu>; }; sleep_cfg2 { - ste,pins = "GPIO121"; + pins = "GPIO121"; ste,config = <&slpm_out_hi>; }; }; @@ -80,21 +80,21 @@ i2c0 { i2c0_default_mux: i2c_mux { default_mux { - ste,function = "i2c0"; - ste,pins = "i2c0_a_1"; + function = "i2c0"; + groups = "i2c0_a_1"; }; }; i2c0_default_mode: i2c_default { default_cfg1 { - ste,pins = "GPIO147", "GPIO148"; + pins = "GPIO147", "GPIO148"; ste,config = <&in_pu>; }; }; i2c0_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO147", "GPIO148"; + pins = "GPIO147", "GPIO148"; ste,config = <&slpm_in_pu>; }; }; @@ -103,21 +103,21 @@ i2c1 { i2c1_default_mux: i2c_mux { default_mux { - ste,function = "i2c1"; - ste,pins = "i2c1_b_2"; + function = "i2c1"; + groups = "i2c1_b_2"; }; }; i2c1_default_mode: i2c_default { default_cfg1 { - ste,pins = "GPIO16", "GPIO17"; + pins = "GPIO16", "GPIO17"; ste,config = <&in_pu>; }; }; i2c1_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO16", "GPIO17"; + pins = "GPIO16", "GPIO17"; ste,config = <&slpm_in_pu>; }; }; @@ -126,21 +126,21 @@ i2c2 { i2c2_default_mux: i2c_mux { default_mux { - ste,function = "i2c2"; - ste,pins = "i2c2_b_2"; + function = "i2c2"; + groups = "i2c2_b_2"; }; }; i2c2_default_mode: i2c_default { default_cfg1 { - ste,pins = "GPIO10", "GPIO11"; + pins = "GPIO10", "GPIO11"; ste,config = <&in_pu>; }; }; i2c2_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO11", "GPIO11"; + pins = "GPIO11", "GPIO11"; ste,config = <&slpm_in_pu>; }; }; @@ -149,21 +149,21 @@ i2c4 { i2c4_default_mux: i2c_mux { default_mux { - ste,function = "i2c4"; - ste,pins = "i2c4_b_2"; + function = "i2c4"; + groups = "i2c4_b_2"; }; }; i2c4_default_mode: i2c_default { default_cfg1 { - ste,pins = "GPIO122", "GPIO123"; + pins = "GPIO122", "GPIO123"; ste,config = <&in_pu>; }; }; i2c4_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO122", "GPIO123"; + pins = "GPIO122", "GPIO123"; ste,config = <&slpm_in_pu>; }; }; @@ -172,21 +172,21 @@ i2c5 { i2c5_default_mux: i2c_mux { default_mux { - ste,function = "i2c5"; - ste,pins = "i2c5_c_2"; + function = "i2c5"; + groups = "i2c5_c_2"; }; }; i2c5_default_mode: i2c_default { default_cfg1 { - ste,pins = "GPIO118", "GPIO119"; + pins = "GPIO118", "GPIO119"; ste,config = <&in_pu>; }; }; i2c5_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO118", "GPIO119"; + pins = "GPIO118", "GPIO119"; ste,config = <&slpm_in_pu>; }; }; diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 30f8601da323..9b69bce9297d 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -47,11 +47,11 @@ gpio2 { gpio2_default_mode: gpio2_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio2_a_1"; + function = "gpio"; + groups = "gpio2_a_1"; }; default_cfg { - ste,pins = "GPIO2_T9"; + pins = "GPIO2_T9"; input-enable; bias-pull-down; }; @@ -60,11 +60,11 @@ gpio4 { gpio4_default_mode: gpio4_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio4_a_1"; + function = "gpio"; + groups = "gpio4_a_1"; }; default_cfg { - ste,pins = "GPIO4_W2"; + pins = "GPIO4_W2"; input-enable; bias-pull-down; }; @@ -73,11 +73,11 @@ gpio10 { gpio10_default_mode: gpio10_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio10_d_1"; + function = "gpio"; + groups = "gpio10_d_1"; }; default_cfg { - ste,pins = "GPIO10_U17"; + pins = "GPIO10_U17"; input-enable; bias-pull-down; }; @@ -86,11 +86,11 @@ gpio11 { gpio11_default_mode: gpio11_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio11_d_1"; + function = "gpio"; + groups = "gpio11_d_1"; }; default_cfg { - ste,pins = "GPIO11_AA18"; + pins = "GPIO11_AA18"; input-enable; bias-pull-down; }; @@ -99,11 +99,11 @@ gpio12 { gpio12_default_mode: gpio12_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio12_d_1"; + function = "gpio"; + groups = "gpio12_d_1"; }; default_cfg { - ste,pins = "GPIO12_U16"; + pins = "GPIO12_U16"; input-enable; bias-pull-down; }; @@ -112,11 +112,11 @@ gpio13 { gpio13_default_mode: gpio13_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio13_d_1"; + function = "gpio"; + groups = "gpio13_d_1"; }; default_cfg { - ste,pins = "GPIO13_W17"; + pins = "GPIO13_W17"; input-enable; bias-pull-down; }; @@ -125,11 +125,11 @@ gpio16 { gpio16_default_mode: gpio16_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio16_a_1"; + function = "gpio"; + groups = "gpio16_a_1"; }; default_cfg { - ste,pins = "GPIO16_F15"; + pins = "GPIO16_F15"; input-enable; bias-pull-down; }; @@ -138,11 +138,11 @@ gpio24 { gpio24_default_mode: gpio24_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio24_a_1"; + function = "gpio"; + groups = "gpio24_a_1"; }; default_cfg { - ste,pins = "GPIO24_T14"; + pins = "GPIO24_T14"; input-enable; bias-pull-down; }; @@ -151,11 +151,11 @@ gpio25 { gpio25_default_mode: gpio25_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio25_a_1"; + function = "gpio"; + groups = "gpio25_a_1"; }; default_cfg { - ste,pins = "GPIO25_R16"; + pins = "GPIO25_R16"; input-enable; bias-pull-down; }; @@ -164,11 +164,11 @@ gpio36 { gpio36_default_mode: gpio36_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio36_a_1"; + function = "gpio"; + groups = "gpio36_a_1"; }; default_cfg { - ste,pins = "GPIO36_A17"; + pins = "GPIO36_A17"; input-enable; bias-pull-down; }; @@ -177,11 +177,11 @@ gpio37 { gpio37_default_mode: gpio37_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio37_a_1"; + function = "gpio"; + groups = "gpio37_a_1"; }; default_cfg { - ste,pins = "GPIO37_E15"; + pins = "GPIO37_E15"; input-enable; bias-pull-down; }; @@ -190,11 +190,11 @@ gpio38 { gpio38_default_mode: gpio38_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio38_a_1"; + function = "gpio"; + groups = "gpio38_a_1"; }; default_cfg { - ste,pins = "GPIO38_C17"; + pins = "GPIO38_C17"; input-enable; bias-pull-down; }; @@ -203,11 +203,11 @@ gpio39 { gpio39_default_mode: gpio39_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio39_a_1"; + function = "gpio"; + groups = "gpio39_a_1"; }; default_cfg { - ste,pins = "GPIO39_E16"; + pins = "GPIO39_E16"; input-enable; bias-pull-down; }; @@ -216,11 +216,11 @@ gpio42 { gpio42_default_mode: gpio42_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio42_a_1"; + function = "gpio"; + groups = "gpio42_a_1"; }; default_cfg { - ste,pins = "GPIO42_U2"; + pins = "GPIO42_U2"; input-enable; bias-pull-down; }; @@ -232,11 +232,11 @@ gpio26 { gpio26_default_mode: gpio26_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio26_d_1"; + function = "gpio"; + groups = "gpio26_d_1"; }; default_cfg { - ste,pins = "GPIO26_M16"; + pins = "GPIO26_M16"; output-low; }; }; @@ -244,11 +244,11 @@ gpio35 { gpio35_default_mode: gpio35_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio35_d_1"; + function = "gpio"; + groups = "gpio35_d_1"; }; default_cfg { - ste,pins = "GPIO35_W15"; + pins = "GPIO35_W15"; output-low; }; }; @@ -260,11 +260,11 @@ ycbcr { ycbcr_default_mode: ycbcr_default { default_mux { - ste,function = "ycbcr"; - ste,pins = "ycbcr0123_d_1"; + function = "ycbcr"; + groups = "ycbcr0123_d_1"; }; default_cfg { - ste,pins = "GPIO6_Y18", + pins = "GPIO6_Y18", "GPIO7_AA20", "GPIO8_W18", "GPIO9_AA19"; @@ -277,11 +277,11 @@ pwm { pwm_default_mode: pwm_default { default_mux { - ste,function = "pwmout"; - ste,pins = "pwmout1_d_1", "pwmout2_d_1"; + function = "pwmout"; + groups = "pwmout1_d_1", "pwmout2_d_1"; }; default_cfg { - ste,pins = "GPIO14_F14", + pins = "GPIO14_F14", "GPIO15_B17"; input-enable; bias-pull-down; @@ -292,11 +292,11 @@ adi1 { adi1_default_mode: adi1_default { default_mux { - ste,function = "adi1"; - ste,pins = "adi1_d_1"; + function = "adi1"; + groups = "adi1_d_1"; }; default_cfg { - ste,pins = "GPIO17_P5", + pins = "GPIO17_P5", "GPIO18_R5", "GPIO19_U5", "GPIO20_T5"; @@ -309,11 +309,11 @@ usbuicc { usbuicc_default_mode: usbuicc_default { default_mux { - ste,function = "usbuicc"; - ste,pins = "usbuicc_d_1"; + function = "usbuicc"; + groups = "usbuicc_d_1"; }; default_cfg { - ste,pins = "GPIO21_H19", + pins = "GPIO21_H19", "GPIO22_G20", "GPIO23_G19"; input-enable; @@ -325,13 +325,13 @@ dmic { dmic_default_mode: dmic_default { default_mux { - ste,function = "dmic"; - ste,pins = "dmic12_d_1", + function = "dmic"; + groups = "dmic12_d_1", "dmic34_d_1", "dmic56_d_1"; }; default_cfg { - ste,pins = "GPIO27_J6", + pins = "GPIO27_J6", "GPIO28_K6", "GPIO29_G6", "GPIO30_H6", @@ -345,11 +345,11 @@ extcpena { extcpena_default_mode: extcpena_default { default_mux { - ste,function = "extcpena"; - ste,pins = "extcpena_d_1"; + function = "extcpena"; + groups = "extcpena_d_1"; }; default_cfg { - ste,pins = "GPIO34_R17"; + pins = "GPIO34_R17"; input-enable; bias-pull-down; }; @@ -359,11 +359,11 @@ modsclsda { modsclsda_default_mode: modsclsda_default { default_mux { - ste,function = "modsclsda"; - ste,pins = "modsclsda_d_1"; + function = "modsclsda"; + groups = "modsclsda_d_1"; }; default_cfg { - ste,pins = "GPIO40_T19", + pins = "GPIO40_T19", "GPIO41_U19"; input-enable; bias-pull-down; @@ -376,22 +376,22 @@ sysclkreq2 { sysclkreq2_default_mode: sysclkreq2_default { default_mux { - ste,function = "sysclkreq"; - ste,pins = "sysclkreq2_d_1"; + function = "sysclkreq"; + groups = "sysclkreq2_d_1"; }; default_cfg { - ste,pins = "GPIO1_T10"; + pins = "GPIO1_T10"; input-enable; bias-disable; }; }; sysclkreq2_sleep_mode: sysclkreq2_sleep { default_mux { - ste,function = "gpio"; - ste,pins = "gpio1_a_1"; + function = "gpio"; + groups = "gpio1_a_1"; }; default_cfg { - ste,pins = "GPIO1_T10"; + pins = "GPIO1_T10"; input-enable; bias-pull-down; }; @@ -400,22 +400,22 @@ sysclkreq4 { sysclkreq4_default_mode: sysclkreq4_default { default_mux { - ste,function = "sysclkreq"; - ste,pins = "sysclkreq4_d_1"; + function = "sysclkreq"; + groups = "sysclkreq4_d_1"; }; default_cfg { - ste,pins = "GPIO3_U9"; + pins = "GPIO3_U9"; input-enable; bias-disable; }; }; sysclkreq4_sleep_mode: sysclkreq4_sleep { default_mux { - ste,function = "gpio"; - ste,pins = "gpio3_a_1"; + function = "gpio"; + groups = "gpio3_a_1"; }; default_cfg { - ste,pins = "GPIO3_U9"; + pins = "GPIO3_U9"; input-enable; bias-pull-down; }; diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi index 6006d62086a2..ccf37a9df050 100644 --- a/arch/arm/boot/dts/ste-href-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi @@ -35,11 +35,11 @@ gpio2 { gpio2_default_mode: gpio2_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio2_a_1"; + function = "gpio"; + groups = "gpio2_a_1"; }; default_cfg { - ste,pins = "GPIO2_R5"; + pins = "GPIO2_R5"; input-enable; bias-pull-down; }; @@ -48,11 +48,11 @@ gpio10 { gpio10_default_mode: gpio10_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio10_d_1"; + function = "gpio"; + groups = "gpio10_d_1"; }; default_cfg { - ste,pins = "GPIO10_B16"; + pins = "GPIO10_B16"; input-enable; bias-pull-down; }; @@ -61,11 +61,11 @@ gpio11 { gpio11_default_mode: gpio11_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio11_d_1"; + function = "gpio"; + groups = "gpio11_d_1"; }; default_cfg { - ste,pins = "GPIO11_B17"; + pins = "GPIO11_B17"; input-enable; bias-pull-down; }; @@ -74,11 +74,11 @@ gpio13 { gpio13_default_mode: gpio13_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio13_d_1"; + function = "gpio"; + groups = "gpio13_d_1"; }; default_cfg { - ste,pins = "GPIO13_D17"; + pins = "GPIO13_D17"; input-enable; bias-disable; }; @@ -87,11 +87,11 @@ gpio34 { gpio34_default_mode: gpio34_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio34_a_1"; + function = "gpio"; + groups = "gpio34_a_1"; }; default_cfg { - ste,pins = "GPIO34_H14"; + pins = "GPIO34_H14"; input-enable; bias-pull-down; }; @@ -100,11 +100,11 @@ gpio50 { gpio50_default_mode: gpio50_default { default_mux { - ste,function = "gpio"; - ste,pins = "gpio50_d_1"; + function = "gpio"; + groups = "gpio50_d_1"; }; default_cfg { - ste,pins = "GPIO50_L4"; + pins = "GPIO50_L4"; input-enable; bias-disable; }; @@ -114,11 +114,11 @@ pwm { pwm_default_mode: pwm_default { default_mux { - ste,function = "pwmout"; - ste,pins = "pwmout1_d_1"; + function = "pwmout"; + groups = "pwmout1_d_1"; }; default_cfg { - ste,pins = "GPIO14_C16"; + pins = "GPIO14_C16"; input-enable; bias-pull-down; }; @@ -128,11 +128,11 @@ adi2 { adi2_default_mode: adi2_default { default_mux { - ste,function = "adi2"; - ste,pins = "adi2_d_1"; + function = "adi2"; + groups = "adi2_d_1"; }; default_cfg { - ste,pins = "GPIO17_P2", + pins = "GPIO17_P2", "GPIO18_N3", "GPIO19_T1", "GPIO20_P3"; @@ -145,11 +145,11 @@ modsclsda { modsclsda_default_mode: modsclsda_default { default_mux { - ste,function = "modsclsda"; - ste,pins = "modsclsda_d_1"; + function = "modsclsda"; + groups = "modsclsda_d_1"; }; default_cfg { - ste,pins = "GPIO40_J15", + pins = "GPIO40_J15", "GPIO41_J14"; input-enable; bias-pull-down; @@ -159,11 +159,11 @@ resethw { resethw_default_mode: resethw_default { default_mux { - ste,function = "resethw"; - ste,pins = "resethw_d_1"; + function = "resethw"; + groups = "resethw_d_1"; }; default_cfg { - ste,pins = "GPIO52_D16"; + pins = "GPIO52_D16"; input-enable; bias-pull-down; }; @@ -172,11 +172,11 @@ service { service_default_mode: service_default { default_mux { - ste,function = "service"; - ste,pins = "service_d_1"; + function = "service"; + groups = "service_d_1"; }; default_cfg { - ste,pins = "GPIO53_D15"; + pins = "GPIO53_D15"; input-enable; bias-pull-down; }; @@ -188,22 +188,22 @@ sysclkreq2 { sysclkreq2_default_mode: sysclkreq2_default { default_mux { - ste,function = "sysclkreq"; - ste,pins = "sysclkreq2_d_1"; + function = "sysclkreq"; + groups = "sysclkreq2_d_1"; }; default_cfg { - ste,pins = "GPIO1_N4"; + pins = "GPIO1_N4"; input-enable; bias-disable; }; }; sysclkreq2_sleep_mode: sysclkreq2_sleep { default_mux { - ste,function = "gpio"; - ste,pins = "gpio1_a_1"; + function = "gpio"; + groups = "gpio1_a_1"; }; default_cfg { - ste,pins = "GPIO1_N4"; + pins = "GPIO1_N4"; input-enable; bias-pull-down; }; @@ -212,22 +212,22 @@ sysclkreq4 { sysclkreq4_default_mode: sysclkreq4_default { default_mux { - ste,function = "sysclkreq"; - ste,pins = "sysclkreq4_d_1"; + function = "sysclkreq"; + groups = "sysclkreq4_d_1"; }; default_cfg { - ste,pins = "GPIO3_P5"; + pins = "GPIO3_P5"; input-enable; bias-disable; }; }; sysclkreq4_sleep_mode: sysclkreq4_sleep { default_mux { - ste,function = "gpio"; - ste,pins = "gpio3_a_1"; + function = "gpio"; + groups = "gpio3_a_1"; }; default_cfg { - ste,pins = "GPIO3_P5"; + pins = "GPIO3_P5"; input-enable; bias-pull-down; }; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index addfcc7c2750..5c5cea232743 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -18,33 +18,33 @@ uart0 { uart0_default_mode: uart0_default { default_mux { - ste,function = "u0"; - ste,pins = "u0_a_1"; + function = "u0"; + groups = "u0_a_1"; }; default_cfg1 { - ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ ste,config = <&in_pu>; }; default_cfg2 { - ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ ste,config = <&out_hi>; }; }; uart0_sleep_mode: uart0_sleep { sleep_cfg1 { - ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ ste,config = <&slpm_in_wkup_pdis>; }; sleep_cfg2 { - ste,pins = "GPIO1_AJ3"; /* RTS */ + pins = "GPIO1_AJ3"; /* RTS */ ste,config = <&slpm_out_hi_wkup_pdis>; }; sleep_cfg3 { - ste,pins = "GPIO3_AH3"; /* TXD */ + pins = "GPIO3_AH3"; /* TXD */ ste,config = <&slpm_out_wkup_pdis>; }; }; @@ -53,28 +53,28 @@ uart1 { uart1_default_mode: uart1_default { default_mux { - ste,function = "u1"; - ste,pins = "u1rxtx_a_1"; + function = "u1"; + groups = "u1rxtx_a_1"; }; default_cfg1 { - ste,pins = "GPIO4_AH6"; /* RXD */ + pins = "GPIO4_AH6"; /* RXD */ ste,config = <&in_pu>; }; default_cfg2 { - ste,pins = "GPIO5_AG6"; /* TXD */ + pins = "GPIO5_AG6"; /* TXD */ ste,config = <&out_hi>; }; }; uart1_sleep_mode: uart1_sleep { sleep_cfg1 { - ste,pins = "GPIO4_AH6"; /* RXD */ + pins = "GPIO4_AH6"; /* RXD */ ste,config = <&slpm_in_wkup_pdis>; }; sleep_cfg2 { - ste,pins = "GPIO5_AG6"; /* TXD */ + pins = "GPIO5_AG6"; /* TXD */ ste,config = <&slpm_out_wkup_pdis>; }; }; @@ -83,28 +83,28 @@ uart2 { uart2_default_mode: uart2_default { default_mux { - ste,function = "u2"; - ste,pins = "u2rxtx_c_1"; + function = "u2"; + groups = "u2rxtx_c_1"; }; default_cfg1 { - ste,pins = "GPIO29_W2"; /* RXD */ + pins = "GPIO29_W2"; /* RXD */ ste,config = <&in_pu>; }; default_cfg2 { - ste,pins = "GPIO30_W3"; /* TXD */ + pins = "GPIO30_W3"; /* TXD */ ste,config = <&out_hi>; }; }; uart2_sleep_mode: uart2_sleep { sleep_cfg1 { - ste,pins = "GPIO29_W2"; /* RXD */ + pins = "GPIO29_W2"; /* RXD */ ste,config = <&in_wkup_pdis>; }; sleep_cfg2 { - ste,pins = "GPIO30_W3"; /* TXD */ + pins = "GPIO30_W3"; /* TXD */ ste,config = <&out_wkup_pdis>; }; }; @@ -114,18 +114,18 @@ i2c0 { i2c0_default_mode: i2c_default { default_mux { - ste,function = "i2c0"; - ste,pins = "i2c0_a_1"; + function = "i2c0"; + groups = "i2c0_a_1"; }; default_cfg1 { - ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ ste,config = <&in_pu>; }; }; i2c0_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -134,18 +134,18 @@ i2c1 { i2c1_default_mode: i2c_default { default_mux { - ste,function = "i2c1"; - ste,pins = "i2c1_b_2"; + function = "i2c1"; + groups = "i2c1_b_2"; }; default_cfg1 { - ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ ste,config = <&in_pu>; }; }; i2c1_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -154,18 +154,18 @@ i2c2 { i2c2_default_mode: i2c_default { default_mux { - ste,function = "i2c2"; - ste,pins = "i2c2_b_2"; + function = "i2c2"; + groups = "i2c2_b_2"; }; default_cfg1 { - ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ ste,config = <&in_pu>; }; }; i2c2_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -174,18 +174,18 @@ i2c3 { i2c3_default_mode: i2c_default { default_mux { - ste,function = "i2c3"; - ste,pins = "i2c3_c_2"; + function = "i2c3"; + groups = "i2c3_c_2"; }; default_cfg1 { - ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ ste,config = <&in_pu>; }; }; i2c3_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -198,18 +198,18 @@ i2c4 { i2c4_default_mode: i2c_default { default_mux { - ste,function = "i2c4"; - ste,pins = "i2c4_b_1"; + function = "i2c4"; + groups = "i2c4_b_1"; }; default_cfg1 { - ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ ste,config = <&in_pu>; }; }; i2c4_sleep_mode: i2c_sleep { sleep_cfg1 { - ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -219,19 +219,19 @@ spi2 { spi2_default_mode: spi_default { default_mux { - ste,function = "spi2"; - ste,pins = "spi2_oc1_2"; + function = "spi2"; + groups = "spi2_oc1_2"; }; default_cfg1 { - ste,pins = "GPIO216_AG12"; /* FRM */ + pins = "GPIO216_AG12"; /* FRM */ ste,config = <&gpio_out_hi>; }; default_cfg2 { - ste,pins = "GPIO218_AH11"; /* RXD */ + pins = "GPIO218_AH11"; /* RXD */ ste,config = <&in_pd>; }; default_cfg3 { - ste,pins = + pins = "GPIO215_AH13", /* TXD */ "GPIO217_AH12"; /* CLK */ ste,config = <&out_lo>; @@ -245,32 +245,32 @@ * as we do not state any muxing. */ idle_cfg1 { - ste,pins = "GPIO218_AH11"; /* RXD */ + pins = "GPIO218_AH11"; /* RXD */ ste,config = <&slpm_in_pdis>; }; idle_cfg2 { - ste,pins = "GPIO215_AH13"; /* TXD */ + pins = "GPIO215_AH13"; /* TXD */ ste,config = <&slpm_out_lo_pdis>; }; idle_cfg3 { - ste,pins = "GPIO217_AH12"; /* CLK */ + pins = "GPIO217_AH12"; /* CLK */ ste,config = <&slpm_pdis>; }; }; spi2_sleep_mode: spi_sleep { sleep_cfg1 { - ste,pins = + pins = "GPIO216_AG12", /* FRM */ "GPIO218_AH11"; /* RXD */ ste,config = <&slpm_in_wkup_pdis>; }; sleep_cfg2 { - ste,pins = "GPIO215_AH13"; /* TXD */ + pins = "GPIO215_AH13"; /* TXD */ ste,config = <&slpm_out_lo_wkup_pdis>; }; sleep_cfg3 { - ste,pins = "GPIO217_AH12"; /* CLK */ + pins = "GPIO217_AH12"; /* CLK */ ste,config = <&slpm_wkup_pdis>; }; }; @@ -281,26 +281,26 @@ /* This is the external SD card slot, 4 bits wide */ sdi0_default_mode: sdi0_default { default_mux { - ste,function = "mc0"; - ste,pins = "mc0_a_1"; + function = "mc0"; + groups = "mc0_a_1"; }; default_cfg1 { - ste,pins = + pins = "GPIO18_AC2", /* CMDDIR */ "GPIO19_AC1", /* DAT0DIR */ "GPIO20_AB4"; /* DAT2DIR */ ste,config = <&out_hi>; }; default_cfg2 { - ste,pins = "GPIO22_AA3"; /* FBCLK */ + pins = "GPIO22_AA3"; /* FBCLK */ ste,config = <&in_nopull>; }; default_cfg3 { - ste,pins = "GPIO23_AA4"; /* CLK */ + pins = "GPIO23_AA4"; /* CLK */ ste,config = <&out_lo>; }; default_cfg4 { - ste,pins = + pins = "GPIO24_AB2", /* CMD */ "GPIO25_Y4", /* DAT0 */ "GPIO26_Y2", /* DAT1 */ @@ -312,14 +312,14 @@ sdi0_sleep_mode: sdi0_sleep { sleep_cfg1 { - ste,pins = + pins = "GPIO18_AC2", /* CMDDIR */ "GPIO19_AC1", /* DAT0DIR */ "GPIO20_AB4"; /* DAT2DIR */ ste,config = <&slpm_out_hi_wkup_pdis>; }; sleep_cfg2 { - ste,pins = + pins = "GPIO22_AA3", /* FBCLK */ "GPIO24_AB2", /* CMD */ "GPIO25_Y4", /* DAT0 */ @@ -329,7 +329,7 @@ ste,config = <&slpm_in_wkup_pdis>; }; sleep_cfg3 { - ste,pins = "GPIO23_AA4"; /* CLK */ + pins = "GPIO23_AA4"; /* CLK */ ste,config = <&slpm_out_lo_wkup_pdis>; }; }; @@ -339,19 +339,19 @@ /* This is the WLAN SDIO 4 bits wide */ sdi1_default_mode: sdi1_default { default_mux { - ste,function = "mc1"; - ste,pins = "mc1_a_1"; + function = "mc1"; + groups = "mc1_a_1"; }; default_cfg1 { - ste,pins = "GPIO208_AH16"; /* CLK */ + pins = "GPIO208_AH16"; /* CLK */ ste,config = <&out_lo>; }; default_cfg2 { - ste,pins = "GPIO209_AG15"; /* FBCLK */ + pins = "GPIO209_AG15"; /* FBCLK */ ste,config = <&in_nopull>; }; default_cfg3 { - ste,pins = + pins = "GPIO210_AJ15", /* CMD */ "GPIO211_AG14", /* DAT0 */ "GPIO212_AF13", /* DAT1 */ @@ -363,11 +363,11 @@ sdi1_sleep_mode: sdi1_sleep { sleep_cfg1 { - ste,pins = "GPIO208_AH16"; /* CLK */ + pins = "GPIO208_AH16"; /* CLK */ ste,config = <&slpm_out_lo_wkup_pdis>; }; sleep_cfg2 { - ste,pins = + pins = "GPIO209_AG15", /* FBCLK */ "GPIO210_AJ15", /* CMD */ "GPIO211_AG14", /* DAT0 */ @@ -383,19 +383,19 @@ /* This is the eMMC 8 bits wide, usually PoP eMMC */ sdi2_default_mode: sdi2_default { default_mux { - ste,function = "mc2"; - ste,pins = "mc2_a_1"; + function = "mc2"; + groups = "mc2_a_1"; }; default_cfg1 { - ste,pins = "GPIO128_A5"; /* CLK */ + pins = "GPIO128_A5"; /* CLK */ ste,config = <&out_lo>; }; default_cfg2 { - ste,pins = "GPIO130_C8"; /* FBCLK */ + pins = "GPIO130_C8"; /* FBCLK */ ste,config = <&in_nopull>; }; default_cfg3 { - ste,pins = + pins = "GPIO129_B4", /* CMD */ "GPIO131_A12", /* DAT0 */ "GPIO132_C10", /* DAT1 */ @@ -411,17 +411,17 @@ sdi2_sleep_mode: sdi2_sleep { sleep_cfg1 { - ste,pins = "GPIO128_A5"; /* CLK */ + pins = "GPIO128_A5"; /* CLK */ ste,config = <&out_lo_wkup_pdis>; }; sleep_cfg2 { - ste,pins = + pins = "GPIO130_C8", /* FBCLK */ "GPIO129_B4"; /* CMD */ ste,config = <&in_wkup_pdis_en>; }; sleep_cfg3 { - ste,pins = + pins = "GPIO131_A12", /* DAT0 */ "GPIO132_C10", /* DAT1 */ "GPIO133_B10", /* DAT2 */ @@ -439,19 +439,19 @@ /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ sdi4_default_mode: sdi4_default { default_mux { - ste,function = "mc4"; - ste,pins = "mc4_a_1"; + function = "mc4"; + groups = "mc4_a_1"; }; default_cfg1 { - ste,pins = "GPIO203_AE23"; /* CLK */ + pins = "GPIO203_AE23"; /* CLK */ ste,config = <&out_lo>; }; default_cfg2 { - ste,pins = "GPIO202_AF25"; /* FBCLK */ + pins = "GPIO202_AF25"; /* FBCLK */ ste,config = <&in_nopull>; }; default_cfg3 { - ste,pins = + pins = "GPIO201_AF24", /* CMD */ "GPIO200_AH26", /* DAT0 */ "GPIO199_AH23", /* DAT1 */ @@ -467,11 +467,11 @@ sdi4_sleep_mode: sdi4_sleep { sleep_cfg1 { - ste,pins = "GPIO203_AE23"; /* CLK */ + pins = "GPIO203_AE23"; /* CLK */ ste,config = <&out_lo_wkup_pdis>; }; sleep_cfg2 { - ste,pins = + pins = "GPIO202_AF25", /* FBCLK */ "GPIO201_AF24", /* CMD */ "GPIO200_AH26", /* DAT0 */ @@ -494,11 +494,11 @@ msp0 { msp0_default_mode: msp0_default { default_msp0_mux { - ste,function = "msp0"; - ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1"; + function = "msp0"; + groups = "msp0txrx_a_1", "msp0tfstck_a_1"; }; default_msp0_cfg { - ste,pins = + pins = "GPIO12_AC4", /* TXD */ "GPIO15_AC3", /* RXD */ "GPIO13_AF3", /* TFS */ @@ -511,15 +511,15 @@ msp1 { msp1_default_mode: msp1_default { default_mux { - ste,function = "msp1"; - ste,pins = "msp1txrx_a_1", "msp1_a_1"; + function = "msp1"; + groups = "msp1txrx_a_1", "msp1_a_1"; }; default_cfg1 { - ste,pins = "GPIO33_AF2"; + pins = "GPIO33_AF2"; ste,config = <&out_lo>; }; default_cfg2 { - ste,pins = + pins = "GPIO34_AE1", "GPIO35_AE2", "GPIO36_AG2"; @@ -533,18 +533,18 @@ msp2_default_mode: msp2_default { /* MSP2 usually used for HDMI audio */ default_mux { - ste,function = "msp2"; - ste,pins = "msp2_a_1"; + function = "msp2"; + groups = "msp2_a_1"; }; default_cfg1 { - ste,pins = + pins = "GPIO193_AH27", /* TXD */ "GPIO194_AF27", /* TCK */ "GPIO195_AG28"; /* TFS */ ste,config = <&in_pd>; }; default_cfg2 { - ste,pins = "GPIO196_AG26"; /* RXD */ + pins = "GPIO196_AG26"; /* RXD */ ste,config = <&out_lo>; }; }; @@ -554,11 +554,11 @@ musb { musb_default_mode: musb_default { default_mux { - ste,function = "usb"; - ste,pins = "usb_a_1"; + function = "usb"; + groups = "usb_a_1"; }; default_cfg1 { - ste,pins = + pins = "GPIO256_AF28", /* NXT */ "GPIO258_AD29", /* XCLK */ "GPIO259_AC29", /* DIR */ @@ -573,25 +573,25 @@ ste,config = <&in_nopull>; }; default_cfg2 { - ste,pins = "GPIO257_AE29"; /* STP */ + pins = "GPIO257_AE29"; /* STP */ ste,config = <&out_hi>; }; }; musb_sleep_mode: musb_sleep { sleep_cfg1 { - ste,pins = + pins = "GPIO256_AF28", /* NXT */ "GPIO258_AD29", /* XCLK */ "GPIO259_AC29"; /* DIR */ ste,config = <&slpm_wkup_pdis_en>; }; sleep_cfg2 { - ste,pins = "GPIO257_AE29"; /* STP */ + pins = "GPIO257_AE29"; /* STP */ ste,config = <&slpm_out_hi_wkup_pdis>; }; sleep_cfg3 { - ste,pins = + pins = "GPIO260_AD28", /* DAT7 */ "GPIO261_AD26", /* DAT6 */ "GPIO262_AE26", /* DAT5 */ @@ -609,8 +609,8 @@ lcd_default_mode: lcd_default { default_mux { /* Mux in VSI0 and all the data lines */ - ste,function = "lcd"; - ste,pins = + function = "lcd"; + groups = "lcdvsi0_a_1", /* VSI0 for LCD */ "lcd_d0_d7_a_1", /* Data lines */ "lcd_d8_d11_a_1", /* TV-out */ @@ -618,7 +618,7 @@ "lcdvsi1_a_1"; /* VSI1 for HDMI */ }; default_cfg1 { - ste,pins = + pins = "GPIO68_E1", /* VSI0 */ "GPIO69_E2"; /* VSI1 */ ste,config = <&in_pu>; @@ -626,7 +626,7 @@ }; lcd_sleep_mode: lcd_sleep { sleep_cfg1 { - ste,pins = "GPIO69_E2"; /* VSI1 */ + pins = "GPIO69_E2"; /* VSI1 */ ste,config = <&slpm_in_wkup_pdis>; }; }; @@ -636,11 +636,11 @@ /* SKE keys on position 2 in an 8x8 matrix */ ske_kpa2_default_mode: ske_kpa2_default { default_mux { - ste,function = "kp"; - ste,pins = "kp_a_2"; + function = "kp"; + groups = "kp_a_2"; }; default_cfg1 { - ste,pins = + pins = "GPIO153_B17", /* I7 */ "GPIO154_C16", /* I6 */ "GPIO155_C19", /* I5 */ @@ -652,7 +652,7 @@ ste,config = <&in_pd>; }; default_cfg2 { - ste,pins = + pins = "GPIO157_A18", /* O7 */ "GPIO158_C18", /* O6 */ "GPIO159_B19", /* O5 */ @@ -666,7 +666,7 @@ }; ske_kpa2_sleep_mode: ske_kpa2_sleep { sleep_cfg1 { - ste,pins = + pins = "GPIO153_B17", /* I7 */ "GPIO154_C16", /* I6 */ "GPIO155_C19", /* I5 */ @@ -678,7 +678,7 @@ ste,config = <&slpm_in_pu_wkup_pdis_en>; }; sleep_cfg2 { - ste,pins = + pins = "GPIO157_A18", /* O7 */ "GPIO158_C18", /* O6 */ "GPIO159_B19", /* O5 */ @@ -696,11 +696,11 @@ */ ske_kpaoc1_default_mode: ske_kpaoc1_default { default_mux { - ste,function = "kp"; - ste,pins = "kp_a_1", "kp_oc1_1"; + function = "kp"; + groups = "kp_a_1", "kp_oc1_1"; }; default_cfg1 { - ste,pins = + pins = "GPIO91_B6", /* KP_O0 */ "GPIO90_A3", /* KP_O1 */ "GPIO87_B3", /* KP_O2 */ @@ -710,7 +710,7 @@ ste,config = <&out_lo>; }; default_cfg2 { - ste,pins = + pins = "GPIO93_B7", /* KP_I0 */ "GPIO92_D6", /* KP_I1 */ "GPIO89_E6", /* KP_I2 */ @@ -729,13 +729,13 @@ * These are plain GPIO pins used by WLAN */ default_cfg1 { - ste,pins = + pins = "GPIO226_AF8", /* WLAN_PMU_EN */ "GPIO85_D5"; /* WLAN_ENA */ ste,config = <&gpio_out_lo>; }; default_cfg2 { - ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */ + pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */ ste,config = <&gpio_in_pu>; }; }; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 84d7c5d883f2..7d4f8184c522 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -103,7 +103,7 @@ prox { prox_stuib_mode: prox_stuib { stuib_cfg { - ste,pins = "GPIO217_AH12"; + pins = "GPIO217_AH12"; ste,config = <&gpio_in_pu>; }; }; @@ -111,7 +111,7 @@ hall { hall_stuib_mode: stuib_tvk { stuib_cfg { - ste,pins = "GPIO145_C13"; + pins = "GPIO145_C13"; ste,config = <&gpio_in_pu>; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 18b65d1b14f2..062c6aae3afa 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -130,7 +130,7 @@ tc35893 { tc35893_tvk_mode: tc35893_tvk { tvk_cfg { - ste,pins = "GPIO218_AH11"; + pins = "GPIO218_AH11"; ste,config = <&gpio_in_pu>; }; }; @@ -138,7 +138,7 @@ prox { prox_tvk_mode: prox_tvk { tvk_cfg { - ste,pins = "GPIO217_AH12"; + pins = "GPIO217_AH12"; ste,config = <&gpio_in_pu>; }; }; @@ -146,7 +146,7 @@ hall { hall_tvk_mode: hall_tvk { tvk_cfg { - ste,pins = "GPIO145_C13"; + pins = "GPIO145_C13"; ste,config = <&gpio_in_pu>; }; }; @@ -155,7 +155,7 @@ accel_tvk_mode: accel_tvk { /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { - ste,pins = "GPIO82_C1", "GPIO83_D3"; + pins = "GPIO82_C1", "GPIO83_D3"; ste,config = <&gpio_in_pu>; }; }; @@ -164,11 +164,11 @@ magneto_tvk_mode: magneto_tvk { /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ tvk_cfg1 { - ste,pins = "GPIO31_V3"; + pins = "GPIO31_V3"; ste,config = <&gpio_in_pu>; }; tvk_cfg2 { - ste,pins = "GPIO32_V2"; + pins = "GPIO32_V2"; ste,config = <&gpio_in_pd>; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index abc762e24fcb..7f3975b58d16 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -79,11 +79,11 @@ ssp0 { ssp0_hrefprev60_mode: ssp0_hrefprev60_default { hrefprev60_mux { - ste,function = "ssp0"; - ste,pins = "ssp0_a_1"; + function = "ssp0"; + groups = "ssp0_a_1"; }; hrefprev60_cfg1 { - ste,pins = "GPIO145_C13"; /* RXD */ + pins = "GPIO145_C13"; /* RXD */ ste,config = <&in_pd>; }; @@ -93,11 +93,11 @@ /* This additional pin needed on early MOP500 and HREFs previous to v60 */ sdi0_default_mode: sdi0_default { hrefprev60_mux { - ste,function = "mc0"; - ste,pins = "mc0dat31dir_a_1"; + function = "mc0"; + groups = "mc0dat31dir_a_1"; }; hrefprev60_cfg1 { - ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; @@ -106,7 +106,7 @@ tc35892 { tc35892_hrefprev60_mode: tc35892_hrefprev60 { hrefprev60_cfg { - ste,pins = "GPIO217_AH12"; + pins = "GPIO217_AH12"; ste,config = <&gpio_in_pu>; }; }; @@ -114,11 +114,11 @@ ipgpio { ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { hrefprev60_mux { - ste,function = "ipgpio"; - ste,pins = "ipgpio0_c_1", "ipgpio1_c_1"; + function = "ipgpio"; + groups = "ipgpio0_c_1", "ipgpio1_c_1"; }; hrefprev60_cfg1 { - ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + pins = "GPIO6_AF6", "GPIO7_AG5"; ste,config = <&in_pu>; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index bcc1f0c37f49..a4bc9e77d640 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -49,7 +49,7 @@ /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { default_hrefv60_cfg1 { - ste,pins = "GPIO95_E8"; + pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; }; @@ -64,19 +64,19 @@ */ ipgpio_hrefv60_mode: ipgpio_hrefv60 { hrefv60_mux { - ste,function = "ipgpio"; - ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1"; + function = "ipgpio"; + groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1"; }; hrefv60_cfg1 { - ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + pins = "GPIO6_AF6", "GPIO7_AG5"; ste,config = <&in_pu>; }; hrefv60_cfg2 { - ste,pins = "GPIO21_AB3"; + pins = "GPIO21_AB3"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg3 { - ste,pins = "GPIO64_F3"; + pins = "GPIO64_F3"; ste,config = <&out_lo>; }; }; @@ -89,7 +89,7 @@ */ etm_hrefv60_mode: etm_hrefv60 { hrefv60_cfg1 { - ste,pins = + pins = "GPIO70_G5", "GPIO71_G4", "GPIO72_H4", @@ -103,11 +103,11 @@ nahj_hrefv60_mode: nahj_hrefv60 { /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */ hrefv60_cfg1 { - ste,pins = "GPIO76_J2"; + pins = "GPIO76_J2"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO216_AG12"; + pins = "GPIO216_AG12"; ste,config = <&gpio_out_hi>; }; }; @@ -116,13 +116,13 @@ nfc_hrefv60_mode: nfc_hrefv60 { /* NFC ENA and RESET to low, pulldown IRQ line */ hrefv60_cfg1 { - ste,pins = + pins = "GPIO77_H1", /* NFC_ENA */ "GPIO142_C11"; /* NFC_RESET */ ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO144_B13"; /* NFC_IRQ */ + pins = "GPIO144_B13"; /* NFC_IRQ */ ste,config = <&gpio_in_pd>; }; }; @@ -130,11 +130,11 @@ force { force_hrefv60_mode: force_hrefv60 { hrefv60_cfg1 { - ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ + pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ ste,config = <&gpio_in_pu>; }; hrefv60_cfg2 { - ste,pins = + pins = "GPIO92_D6", /* FORCE_SENSING_RST */ "GPIO97_D9"; /* FORCE_SENSING_WU */ ste,config = <&gpio_out_lo>; @@ -144,7 +144,7 @@ dipro { dipro_hrefv60_mode: dipro_hrefv60 { hrefv60_cfg1 { - ste,pins = "GPIO139_C9"; /* DIPRO_INT */ + pins = "GPIO139_C9"; /* DIPRO_INT */ ste,config = <&gpio_in_pu>; }; }; @@ -153,7 +153,7 @@ vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 { /* Audio Amplifier HF enable GPIO */ hrefv60_cfg1 { - ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ + pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ ste,config = <&gpio_out_hi>; }; }; @@ -165,7 +165,7 @@ * pull low to reset state */ hrefv60_cfg1 { - ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + pins = "GPIO171_D23"; /* GBF_ENA_RESET */ ste,config = <&gpio_out_lo>; }; }; @@ -174,7 +174,7 @@ hdtv_hrefv60_mode: hdtv_hrefv60 { /* MSP : HDTV INTERFACE GPIO line */ hrefv60_cfg1 { - ste,pins = "GPIO192_AJ27"; + pins = "GPIO192_AJ27"; ste,config = <&gpio_in_pd>; }; }; @@ -187,11 +187,11 @@ * reset signals low. */ hrefv60_cfg1 { - ste,pins = "GPIO143_D12", "GPIO146_D13"; + pins = "GPIO143_D12", "GPIO146_D13"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO67_G2"; + pins = "GPIO67_G2"; ste,config = <&gpio_in_pu>; }; }; @@ -204,11 +204,11 @@ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) */ hrefv60_cfg1 { - ste,pins ="GPIO65_F1"; + pins ="GPIO65_F1"; ste,config = <&gpio_out_hi>; }; hrefv60_cfg2 { - ste,pins ="GPIO66_G3"; + pins ="GPIO66_G3"; ste,config = <&gpio_out_lo>; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index a8c00ee7522a..3d0b8755caee 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -25,11 +25,11 @@ stmpe2401_1 { stmpe2401_1_nhk_mode: stmpe2401_1_nhk { nhk_cfg1 { - ste,pins = "GPIO76_B20"; // IRQ line + pins = "GPIO76_B20"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO77_B8"; // reset line + pins = "GPIO77_B8"; // reset line ste,output = <1>; }; }; @@ -37,11 +37,11 @@ stmpe2401_2 { stmpe2401_2_nhk_mode: stmpe2401_2_nhk { nhk_cfg1 { - ste,pins = "GPIO78_A8"; // IRQ line + pins = "GPIO78_A8"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO79_C9"; // reset line + pins = "GPIO79_C9"; // reset line ste,output = <1>; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index e411ff7769fe..85d3b95dfdba 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -30,12 +30,12 @@ cd_default_mode: cd_default { cd_default_cfg1 { /* CD input GPIO */ - ste,pins = "GPIO111_H21"; + pins = "GPIO111_H21"; ste,input = <0>; }; cd_default_cfg2 { /* CD GPIO biasing */ - ste,pins = "GPIO112_J21"; + pins = "GPIO112_J21"; ste,output = <0>; }; }; @@ -43,7 +43,7 @@ gpioi2c { gpioi2c_default_mode: gpioi2c_default { gpioi2c_default_cfg { - ste,pins = "GPIO73_C21", "GPIO74_C20"; + pins = "GPIO73_C21", "GPIO74_C20"; ste,input = <0>; }; }; @@ -51,7 +51,7 @@ user-led { user_led_default_mode: user_led_default { user_led_default_cfg { - ste,pins = "GPIO2_C5"; + pins = "GPIO2_C5"; ste,output = <1>; }; }; @@ -59,7 +59,7 @@ user-button { user_button_default_mode: user_button_default { user_button_default_cfg { - ste,pins = "GPIO3_A4"; + pins = "GPIO3_A4"; ste,input = <0>; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index f435ff20aefe..f182f6538e90 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -100,41 +100,41 @@ uart0 { uart0_default_mux: uart0_mux { u0_default_mux { - ste,function = "u0"; - ste,pins = "u0_a_1"; + function = "u0"; + groups = "u0_a_1"; }; }; }; uart1 { uart1_default_mux: uart1_mux { u1_default_mux { - ste,function = "u1"; - ste,pins = "u1_a_1"; + function = "u1"; + groups = "u1_a_1"; }; }; }; mmcsd { mmcsd_default_mux: mmcsd_mux { mmcsd_default_mux { - ste,function = "mmcsd"; - ste,pins = "mmcsd_a_1", "mmcsd_b_1"; + function = "mmcsd"; + groups = "mmcsd_a_1", "mmcsd_b_1"; }; }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { /* MCCLK */ - ste,pins = "GPIO8_B10"; + pins = "GPIO8_B10"; ste,output = <0>; }; mmcsd_default_cfg2 { /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - ste,pins = "GPIO10_C11", "GPIO15_A12", + pins = "GPIO10_C11", "GPIO15_A12", "GPIO16_C13", "GPIO23_D15"; ste,output = <1>; }; mmcsd_default_cfg3 { /* MCCMD, MCDAT3-0, MCMSFBCLK */ - ste,pins = "GPIO9_A10", "GPIO11_B11", + pins = "GPIO9_A10", "GPIO11_B11", "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO24_C15"; ste,input = <1>; @@ -144,13 +144,13 @@ i2c0 { i2c0_default_mux: i2c0_mux { i2c0_default_mux { - ste,function = "i2c0"; - ste,pins = "i2c0_a_1"; + function = "i2c0"; + groups = "i2c0_a_1"; }; }; i2c0_default_mode: i2c0_default { i2c0_default_cfg { - ste,pins = "GPIO62_D3", "GPIO63_D2"; + pins = "GPIO62_D3", "GPIO63_D2"; ste,input = <0>; }; }; @@ -158,13 +158,13 @@ i2c1 { i2c1_default_mux: i2c1_mux { i2c1_default_mux { - ste,function = "i2c1"; - ste,pins = "i2c1_a_1"; + function = "i2c1"; + groups = "i2c1_a_1"; }; }; i2c1_default_mode: i2c1_default { i2c1_default_cfg { - ste,pins = "GPIO53_L4", "GPIO54_L3"; + pins = "GPIO53_L4", "GPIO54_L3"; ste,input = <0>; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 3e97a669f15e..206826a855c0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -404,17 +404,17 @@ */ eth_snowball_mode: eth_snowball { snowball_mux { - ste,function = "sm"; - ste,pins = "sm_b_1"; + function = "sm"; + groups = "sm_b_1"; }; /* LAN IRQ pin */ snowball_cfg1 { - ste,pins = "GPIO140_B11"; + pins = "GPIO140_B11"; ste,config = <&in_nopull>; }; /* LAN reset pin */ snowball_cfg2 { - ste,pins = "GPIO141_C12"; + pins = "GPIO141_C12"; ste,config = <&gpio_out_hi>; }; @@ -423,11 +423,11 @@ sdi0 { sdi0_default_mode: sdi0_default { snowball_mux { - ste,function = "mc0"; - ste,pins = "mc0dat31dir_a_1"; + function = "mc0"; + groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; @@ -436,19 +436,19 @@ ssp0 { ssp0_snowball_mode: ssp0_snowball_default { snowball_mux { - ste,function = "ssp0"; - ste,pins = "ssp0_a_1"; + function = "ssp0"; + groups = "ssp0_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO144_B13"; /* FRM */ + pins = "GPIO144_B13"; /* FRM */ ste,config = <&gpio_out_hi>; }; snowball_cfg2 { - ste,pins = "GPIO145_C13"; /* RXD */ + pins = "GPIO145_C13"; /* RXD */ ste,config = <&in_pd>; }; snowball_cfg3 { - ste,pins = + pins = "GPIO146_D13", /* TXD */ "GPIO143_D12"; /* CLK */ ste,config = <&out_lo>; @@ -459,7 +459,7 @@ gpio_led { gpioled_snowball_mode: gpioled_default { snowball_cfg1 { - ste,pins = "GPIO142_C11"; + pins = "GPIO142_C11"; ste,config = <&gpio_out_hi>; }; @@ -469,7 +469,7 @@ accel_snowball_mode: accel_snowball { /* Accelerometer lines */ snowball_cfg1 { - ste,pins = + pins = "GPIO163_C20", /* ACCEL_IRQ1 */ "GPIO164_B21"; /* ACCEL_IRQ2 */ ste,config = <&gpio_in_pu>; @@ -479,7 +479,7 @@ magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { - ste,pins = "GPIO165_C21"; /* MAG_DRDY */ + pins = "GPIO165_C21"; /* MAG_DRDY */ ste,config = <&gpio_in_pu>; }; }; @@ -491,7 +491,7 @@ * pull low to reset state */ snowball_cfg1 { - ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + pins = "GPIO171_D23"; /* GBF_ENA_RESET */ ste,config = <&gpio_out_lo>; }; }; @@ -503,13 +503,13 @@ * These are plain GPIO pins used by WLAN */ snowball_cfg1 { - ste,pins = + pins = "GPIO161_D21", /* WLAN_PMU_EN */ "GPIO215_AH13"; /* WLAN_ENA */ ste,config = <&gpio_out_lo>; }; snowball_cfg2 { - ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */ + pins = "GPIO216_AG12"; /* WLAN_IRQ */ ste,config = <&gpio_in_pu>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e3ab942fd148..7b4099fcf817 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -188,19 +188,11 @@ "apb0_ir1", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 81ad4b94e812..1b76667f3182 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -176,19 +176,11 @@ "apb0_ir", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b131068f4f35..c35217ea1f64 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -161,19 +161,11 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a400172a8a52..f47156b6572b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -229,19 +229,11 @@ "apb1_daudio1"; }; - apb2_mux: apb2_mux@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82a524ce28ad..e21ce5992d56 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -236,19 +236,11 @@ "apb0_iis2", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 6086adbf9d74..0746cd1024d7 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -189,19 +189,11 @@ "apb1_daudio0", "apb1_daudio1"; }; - apb2_mux: apb2_mux_clk@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 222f3b3f4dd5..4296b5398bf5 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra114-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra114-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -50,6 +51,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DC>; + nvidia,head = <0>; rgb { @@ -67,6 +70,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DCB>; + nvidia,head = <1>; rgb { @@ -498,15 +503,15 @@ reset-names = "fuse"; }; - iommu@70019010 { - compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; - reg = <0x70019010 0x02c - 0x700191f0 0x010 - 0x70019228 0x074>; - nvidia,#asids = <4>; - dma-window = <0 0x40000000>; - nvidia,swgroups = <0x18659fe>; - nvidia,ahb = <&ahb>; + mc: memory-controller@70019000 { + compatible = "nvidia,tegra114-mc"; + reg = <0x70019000 0x1000>; + clocks = <&tegra_car TEGRA114_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; }; ahub@70080000 { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 51b373ff1065..4eb540be368f 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1942,4 +1942,48 @@ <&tegra_car TEGRA124_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + mem { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + gpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index df2b06b29985..4be06c6ea0c8 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1,8 +1,10 @@ #include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra124-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -102,6 +104,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DC>; + nvidia,head = <0>; }; @@ -115,6 +119,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DCB>; + nvidia,head = <1>; }; @@ -275,7 +281,8 @@ pinmux: pinmux@0,70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x434>; /* Mux registers */ + <0x0 0x70003000 0x0 0x434>, /* Mux registers */ + <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */ }; /* @@ -551,6 +558,17 @@ reset-names = "fuse"; }; + mc: memory-controller@0,70019000 { + compatible = "nvidia,tegra124-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; @@ -640,6 +658,18 @@ status = "disabled"; }; + soctherm: thermal-sensor@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -881,6 +911,40 @@ }; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index ea282c7c0ca5..e2fed2712249 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -406,7 +406,7 @@ clock-frequency = <400000>; magnetometer@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b270b9e3d455..99475f6e76a3 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra30-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra30-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -166,6 +167,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DC>; + nvidia,head = <0>; rgb { @@ -183,6 +186,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + iommus = <&mc TEGRA_SWGROUP_DCB>; + nvidia,head = <1>; rgb { @@ -615,23 +620,15 @@ clock-names = "pclk", "clk32k_in"; }; - memory-controller@7000f000 { + mc: memory-controller@7000f000 { compatible = "nvidia,tegra30-mc"; - reg = <0x7000f000 0x010 - 0x7000f03c 0x1b4 - 0x7000f200 0x028 - 0x7000f284 0x17c>; + reg = <0x7000f000 0x400>; + clocks = <&tegra_car TEGRA30_CLK_MC>; + clock-names = "mc"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - iommu@7000f010 { - compatible = "nvidia,tegra30-smmu"; - reg = <0x7000f010 0x02c - 0x7000f1f0 0x010 - 0x7000f228 0x05c>; - nvidia,#asids = <4>; /* # of ASIDs */ - dma-window = <0 0x40000000>; /* IOVA start & length */ - nvidia,ahb = <&ahb>; + #iommu-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 322fd1519b09..33920df03640 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -358,6 +358,205 @@ }; }; + etb@0,20010000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + coresight-default-sink; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etb_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + tpiu@0,20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + }; + + funnel@0,20040000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel_out_port0: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* Input port #3 is for ITM, not supported here */ + + port@4 { + reg = <4>; + funnel_in_port4: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@5 { + reg = <5>; + funnel_in_port5: endpoint { + slave-mode; + remote-endpoint = <&etm2_out_port>; + }; + }; + }; + }; + + ptm@0,2201c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201c000 0 0x1000>; + + cpu = <&cpu0>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + ptm@0,2201d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201d000 0 0x1000>; + + cpu = <&cpu1>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + etm@0,2203c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203c000 0 0x1000>; + + cpu = <&cpu2>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; + }; + }; + + etm@0,2203d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203d000 0 0x1000>; + + cpu = <&cpu3>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; + }; + }; + + etm@0,2203e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203e000 0 0x1000>; + + cpu = <&cpu4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm2_out_port: endpoint { + remote-endpoint = <&funnel_in_port5>; + }; + }; + }; + smb { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index a0f762159cb2..f2b64b1b00fa 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -129,13 +129,28 @@ &fec0 { phy-mode = "rmii"; + phy-handle = <ðphy0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec0>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; }; &fec1 { phy-mode = "rmii"; + phy-handle = <ðphy1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; status = "okay"; |
