diff options
Diffstat (limited to 'arch/arm/boot')
34 files changed, 1323 insertions, 83 deletions
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index d1153c8a765a..9448aa0c6686 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -7,6 +7,8 @@ #define do_extend_cmdline 0 #endif +#define NR_BANKS 16 + static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 794c73e5c4e4..db464d7eaca8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -857,6 +857,35 @@ ti,hwmods = "hdq1w"; status = "disabled"; }; + + dss: dss@4832a000 { + compatible = "ti,omap3-dss"; + reg = <0x4832a000 0x200>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@4832a400 { + compatible = "ti,omap3-dispc"; + reg = <0x4832a400 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + + rfbi: rfbi@4832a800 { + compatible = "ti,omap3-rfbi"; + reg = <0x4832a800 0x100>; + ti,hwmods = "dss_rfbi"; + clocks = <&disp_clk>; + clock-names = "fck"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index c25d15837ce9..003766c47bbf 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -19,6 +19,10 @@ model = "TI AM437x GP EVM"; compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -64,6 +68,44 @@ 0x02000069 /* LEFT */ 0x0201006c>; /* DOWN */ }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; }; &am43xx_pinmux { @@ -171,6 +213,47 @@ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; &i2c0 { @@ -359,3 +442,17 @@ }; }; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ad362c50e32e..19f1f7e87597 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -19,6 +19,10 @@ model = "TI AM43x EPOS EVM"; compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + aliases { + display0 = &lcd0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -27,6 +31,44 @@ enable-active-high; }; + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + /* + * SelLCDorHDMI, LOW to select HDMI. This is not really the + * panel's enable GPIO, but we don't have HDMI driver support nor + * support to switch between two displays, so using this gpio as + * panel's enable should be safe. + */ + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <16>; + hsync-len = <30>; + vback-porch = <10>; + vfront-porch = <22>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + am43xx_pinmux: pinmux@44e10800 { cpsw_default: cpsw_default { pinctrl-single,pins = < @@ -161,6 +203,46 @@ 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ >; }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ + 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ + 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -468,3 +550,17 @@ pinctrl-names = "default"; pinctrl-0 = <&hdq_pins>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 08a44d41b672..8b366822bb43 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/clock/bcm21664.h" + #include "skeleton.dtsi" / { @@ -43,7 +45,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x118>; - clocks = <&uartb_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +55,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x118>; - clocks = <&uartb2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +65,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x118>; - clocks = <&uartb3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -85,7 +87,7 @@ compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&hub_timer_clk>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { @@ -106,7 +108,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio1_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; @@ -114,7 +116,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio2_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; @@ -122,7 +124,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio3_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; @@ -130,7 +132,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio4_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; @@ -140,7 +142,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc1_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; @@ -150,7 +152,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; @@ -160,7 +162,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; @@ -170,105 +172,149 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc4_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { - bsc1_clk: bsc1 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; - #clock-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges; - bsc2_clk: bsc2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc3_clk: bsc3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + bbl_32k_clk: bbl_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc4_clk: bsc4 { + ref_13m_clk: ref_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - pmu_bsc_clk: pmu_bsc { + var_13m_clk: var_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - hub_timer_clk: hub_timer { - compatible = "fixed-clock"; - clock-frequency = <32768>; + dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; }; - pwm_clk: pwm { + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; - #clock-cells = <0>; }; - sdio1_clk: sdio1 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_52m_clk: ref_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio2_clk: sdio2 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + var_52m_clk: var_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio3_clk: sdio3 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio4_clk: sdio4 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_96m_clk: ref_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - tmon_1m_clk: tmon_1m { - compatible = "fixed-clock"; - clock-frequency = <1000000>; + var_96m_clk: var_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - uartb_clk: uartb { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_104m_clk: ref_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb2_clk: uartb2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + var_104m_clk: var_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb3_clk: uartb3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_156m_clk: ref_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; }; - usb_otg_ahb_clk: usb_otg_ahb { - compatible = "fixed-clock"; - clock-frequency = <52000000>; + var_156m_clk: var_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; }; }; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index d9f99e7deb83..c1414cb81fd4 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -66,9 +66,21 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; + }; + + devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; + }; + rstctrl: reset-controller { compatible = "ti,keystone-reset"; - reg = <0x023100e8 4>; /* pll reset control reg */ + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; }; /include/ "keystone-clocks.dtsi" diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 0c9647d28765..fb354225740a 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -36,7 +36,7 @@ ranges = <0x40000000 0x40000000 0xa0000000>; l2-cache-controller@c0030000 { - compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0xc0030000 0x1000>; interrupts = <0 59 0>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 9cba94bed7ad..a8bd4349c7d2 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -26,7 +26,44 @@ }; }; +&dss { + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + &omap3_pmx_core { + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -75,6 +112,19 @@ }; }; +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 3007e79c9cd6..8ae8f007c8ad 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -44,6 +44,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; +}; &i2c2 { clock-frequency = <400000>; @@ -61,6 +66,27 @@ }; }; +&lcd_3v3 { + gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ + enable-active-low; +}; + +&lcd0 { + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio6>; + interrupts = <15 0>; /* gpio175 */ + pendown-gpio = <&gpio6 15 0>; + }; +}; + &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index f8ad125fa46f..021311f7964b 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -44,6 +44,36 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + spi_lcd { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_pins>; + + gpio-sck = <&gpio1 12 0>; + gpio-miso = <&gpio1 18 0>; + gpio-mosi = <&gpio1 20 0>; + cs-gpios = <&gpio1 19 0>; + num-chipselects = <1>; + + /* lcd panel */ + lcd: td028ttec1@0 { + compatible = "toppoly,td028ttec1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; }; &omap3_pmx_core { @@ -78,6 +108,47 @@ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + spi_gpio_pins: spi_gpio_pinmux { + pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ + 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ + 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ + 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + >; + }; }; &i2c1 { @@ -219,3 +290,22 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 476ff158ddb3..af272c156e21 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -164,6 +164,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; +}; &i2c2 { clock-frequency = <400000>; @@ -173,6 +178,25 @@ clock-frequency = <400000>; }; +/* tps61130rsa enabled by twl4030 regen */ +&lcd_3v3 { + regulator-always-on; +}; + +&lcd0 { + enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */ + reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */ + mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio2>; + interrupts = <22 0>; /* gpio54 */ + pendown-gpio = <&gpio2 22 0>; + }; +}; + &mmc1 { /* See 35xx errata 2.1.1.128 in SPRZ278F */ compatible = "ti,omap3-pre-es3-hsmmc"; @@ -251,8 +275,3 @@ /* Needed for ads7846 */ regulator-name = "vcc"; }; - -&vpll2 { - /* Needed for DSS */ - regulator-name = "vdds_dsi"; -}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 059a8ff1e6ac..ae8ae3f4f9bf 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -651,9 +651,24 @@ * Also... order in the device tree actually matters here. */ tsc2005@0 { - compatible = "tsc2005"; + compatible = "ti,tsc2005"; spi-max-frequency = <6000000>; reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-max-x = <4096>; + touchscreen-max-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; }; acx565akm@2 { diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 19d64864a109..7aae8fb82c1f 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd35.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 19de6ff79686..17b82f82638a 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi new file mode 100644 index 000000000000..802f704f67e5 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * DVI output for some Gumstix Overo boards (Tobi and Summit) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &dvi0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi new file mode 100644 index 000000000000..233c69e50ae3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lb035_pins: pinmux_lb035_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + lcd0: display@0 { + compatible = "lgphilips,lb035q02"; + label = "lcd"; + + reg = <1>; /* CS1 */ + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + + pinctrl-names = "default"; + pinctrl-0 = <&lb035_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi new file mode 100644 index 000000000000..f5395b7da912 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43) + */ + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */ + + default-on; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio4>; + interrupts = <18 0>; /* gpio_114 */ + pendown-gpio = <&gpio4 18 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 5e848c26986b..49d2254a99b0 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index abea232825b9..087aedf5b902 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd43.dtsi" #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi index 999d1cd4a09f..0ac97ba98549 100644 --- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 13df50b39442..9e24b6a1d07b 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -11,6 +11,7 @@ */ #include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-dvi.dtsi" / { leds { diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi new file mode 100644 index 000000000000..f4b1a61853e3 --- /dev/null +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -0,0 +1,71 @@ +/* + * Common file for omap dpi panels with QVGA and reset pins + * + * Note that the board specifc DTS file needs to specify + * at minimum the GPIO enable-gpios for display, and + * gpios for gpio-backlight. + */ + +/ { + aliases { + display0 = &lcd0; + }; + + backlight0: backlight { + compatible = "gpio-backlight"; + default-on; + }; + + /* 3.3V GPIO controlled regulator for LCD_ENVDD */ + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + }; + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + label = "lcd"; + power-supply = <&lcd_3v3>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <18>; + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + vcc-supply = <&lcd_3v3>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + ti,swap-xy; + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index cd53a64d8f2e..6dc84d9f9b4c 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -15,6 +15,10 @@ model = "OMAP4430 Gumstix Duovero on Parlor"; compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; + aliases { + display0 = &hdmi0; + }; + leds { compatible = "gpio-leds"; led0 { @@ -35,6 +39,21 @@ gpio-key,wakeup; }; }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; }; &omap4_pmx_core { @@ -77,6 +96,15 @@ OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; }; &i2c2 { @@ -143,4 +171,20 @@ }; }; +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 43a587e097d4..7e26d222bfe3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -922,6 +922,8 @@ ti,hwmods = "dss_hdmi"; clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; }; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3b99ec25b748..1e1b05768cec 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -20,6 +20,10 @@ reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; + aliases { + display0 = &hdmi0; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -51,6 +55,51 @@ default-state = "off"; }; }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; }; &omap5_pmx_core { @@ -183,6 +232,19 @@ >; }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; }; &omap5_pmx_wkup { @@ -434,6 +496,13 @@ pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; + + gpio9: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcbsp3 { @@ -491,3 +560,21 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e58be57984ab..3bfda16c8b52 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -924,6 +924,68 @@ ti,hwmods = "sata"; }; + dss: dss@58000000 { + compatible = "ti,omap5-dss"; + reg = <0x58000000 0x80>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,omap5-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + }; + + dsi1: encoder@58004000 { + compatible = "ti,omap5-dsi"; + reg = <0x58004000 0x200>, + <0x58004200 0x40>, + <0x58004300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi1"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + dsi2: encoder@58005000 { + compatible = "ti,omap5-dsi"; + reg = <0x58009000 0x200>, + <0x58009200 0x40>, + <0x58009300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_dsi2"; + clocks = <&dss_dss_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; + + hdmi: encoder@58060000 { + compatible = "ti,omap5-hdmi"; + reg = <0x58040000 0x200>, + <0x58040200 0x80>, + <0x58040300 0x80>, + <0x58060000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 3df7ba860282..963b7e54ab15 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -48,7 +48,7 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index c7b794ed337d..d96e179490ce 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -713,7 +713,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -724,7 +724,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -735,7 +735,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index aa1dd59dc34a..b64f705d9008 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -560,7 +560,7 @@ i2c0: i2c@01c2ac00 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -571,7 +571,7 @@ i2c1: i2c@01c2b000 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -582,7 +582,7 @@ i2c2: i2c@01c2b400 { #address-cells = <1>; #size-cells = <0>; - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c9fdb7b3ecd9..3b2a94c40f6e 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -486,7 +486,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; @@ -497,7 +497,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; @@ -508,7 +508,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 0f4ea4990d2c..a9dfa12eb735 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -621,6 +621,17 @@ status = "disabled"; }; + timer@01c60000 { + compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 4>, + <0 52 4>, + <0 53 4>, + <0 54 4>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1_rst 19>; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 385933bac114..01e94664232a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -863,7 +863,7 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; @@ -874,7 +874,7 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; @@ -885,7 +885,7 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; @@ -896,7 +896,7 @@ }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; @@ -907,7 +907,7 @@ }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun4i-i2c"; + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a5504591..d2709b73316b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -88,6 +88,14 @@ interrupts = <1 13 0x304>; }; + timer@2c000200 { + compatible = "arm,cortex-a5-global-timer", + "arm,cortex-a9-global-timer"; + reg = <0x2c000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&oscclk0>; + }; + watchdog@2c000620 { compatible = "arm,cortex-a5-twd-wdt"; reg = <0x2c000620 0x20>; @@ -120,7 +128,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0: osc@0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 73355ddc5186..6cc314e7b8fb 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -371,6 +371,19 @@ status = "disabled"; }; + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; |
