summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra7.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra7.dtsi')
-rw-r--r--arch/arm/boot/dts/dra7.dtsi445
1 files changed, 427 insertions, 18 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 13ac88279427..d9bfb94a2992 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -73,6 +73,49 @@
interrupt-parent = <&gic>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
+ ti,syscon-rev = <&scm_wkup 0x204>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp_nom@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od@1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ opp-supported-hw = <0xFF 0x02>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -123,7 +166,7 @@
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
- pbias_regulator: pbias_regulator {
+ pbias_regulator: pbias_regulator@e00 {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
@@ -161,6 +204,24 @@
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
+
+ sdma_xbar: dma-router@b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xb78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
+
+ edma_xbar: dma-router@c78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xc78 0x7c>;
+ #dma-cells = <2>;
+ dma-requests = <204>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&edma>;
+ };
};
cm_core_aon: cm_core_aon@5000 {
@@ -215,6 +276,11 @@
prm_clockdomains: clockdomains {
};
};
+
+ scm_wkup: scm_conf@c000 {
+ compatible = "syscon";
+ reg = <0xc000 0x1000>;
+ };
};
axi@0 {
@@ -258,7 +324,7 @@
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
- pcie@51000000 {
+ pcie@51800000 {
compatible = "ti,dra7-pcie";
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
@@ -286,6 +352,53 @@
};
};
+ ocmcram1: ocmcram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x80000>;
+ ranges = <0x0 0x40300000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * This is a placeholder for an optional reserved
+ * region for use by secure software. The size
+ * of this region is not known until runtime so it
+ * is set as zero to either be updated to reserve
+ * space or left unchanged to leave all SRAM for use.
+ * On HS parts that that require the reserved region
+ * either the bootloader can update the size to
+ * the required amount or the node can be overridden
+ * from the board dts file for the secure platform.
+ */
+ sram-hs@0 {
+ compatible = "ti,secure-ram";
+ reg = <0x0 0x0>;
+ };
+ };
+
+ /*
+ * NOTE: ocmcram2 and ocmcram3 are not available on all
+ * DRA7xx and AM57xx variants. Confirm availability in
+ * the data manual for the exact part number in use
+ * before enabling these nodes in the board dts file.
+ */
+ ocmcram2: ocmcram@40400000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40400000 0x100000>;
+ ranges = <0x0 0x40400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ ocmcram3: ocmcram@40500000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40500000 0x100000>;
+ ranges = <0x0 0x40500000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
bandgap: bandgap@4a0021e0 {
reg = <0x4a0021e0 0xc
0x4a00232c 0xc
@@ -315,13 +428,43 @@
dma-requests = <127>;
};
- sdma_xbar: dma-router@4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
+ edma: edma@43300000 {
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x43300000 0x100000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <20 21>;
+ * for example. Note that these channels need to be
+ * masked in the xbar as well.
+ */
+ };
+
+ edma_tptc0: tptc@43400000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x43400000 0x100000>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@43500000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x43500000 0x100000>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
};
gpio1: gpio@4ae10000 {
@@ -773,12 +916,20 @@
ti,hwmods = "timer11";
};
+ timer12: timer@4ae20000 {
+ compatible = "ti,omap5430-timer";
+ reg = <0x4ae20000 0x80>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "timer12";
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
+
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
- status = "disabled";
};
timer14: timer@4882a000 {
@@ -786,7 +937,6 @@
reg = <0x4882a000 0x80>;
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
- status = "disabled";
};
timer15: timer@4882c000 {
@@ -794,7 +944,6 @@
reg = <0x4882c000 0x80>;
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
- status = "disabled";
};
timer16: timer@4882e000 {
@@ -802,7 +951,6 @@
reg = <0x4882e000 0x80>;
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
- status = "disabled";
};
wdt2: wdt@4ae14000 {
@@ -1398,12 +1546,16 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
status = "disabled";
};
@@ -1418,21 +1570,136 @@
status = "disabled";
};
+ mcasp1: mcasp@48460000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp1";
+ reg = <0x48460000 0x2000>,
+ <0x45800000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+ <&mcasp1_ahclkr_mux>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@48464000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp2";
+ reg = <0x48464000 0x2000>,
+ <0x45c00000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+ <&mcasp2_ahclkr_mux>;
+ clock-names = "fck", "ahclkx", "ahclkr";
+ status = "disabled";
+ };
+
mcasp3: mcasp@48468000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
- reg = <0x48468000 0x2000>;
- reg-names = "mpu";
+ reg = <0x48468000 0x2000>,
+ <0x46000000 0x1000>;
+ reg-names = "mpu","dat";
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
- dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+ dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
+ mcasp4: mcasp@4846c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp4";
+ reg = <0x4846c000 0x2000>,
+ <0x48436000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@48470000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp5";
+ reg = <0x48470000 0x2000>,
+ <0x4843a000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@48474000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp6";
+ reg = <0x48474000 0x2000>,
+ <0x4844c000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@48478000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp7";
+ reg = <0x48478000 0x2000>,
+ <0x48450000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@4847c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp8";
+ reg = <0x4847c000 0x2000>,
+ <0x48454000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
@@ -1456,7 +1723,6 @@
ale_entries = <1024>;
bd_ram_size = <0x2000>;
no_bd_ram = <0>;
- rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
@@ -1491,7 +1757,7 @@
status = "disabled";
davinci_mdio: mdio@48485000 {
- compatible = "ti,davinci_mdio";
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";
@@ -1573,6 +1839,149 @@
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss@4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm@4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm@48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap@48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm@48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap@48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ aes1: aes@4b500000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes1";
+ reg = <0x4b500000 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ aes2: aes@4b700000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes2";
+ reg = <0x4b700000 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ des: des@480a5000 {
+ compatible = "ti,omap4-des";
+ ti,hwmods = "des";
+ reg = <0x480a5000 0xa0>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ sham: sham@53100000 {
+ compatible = "ti,omap5-sham";
+ ti,hwmods = "sham";
+ reg = <0x4b101000 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ rng: rng@48090000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48090000 0x2000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
thermal_zones: thermal-zones {
OpenPOWER on IntegriCloud