diff options
Diffstat (limited to 'Documentation')
33 files changed, 537 insertions, 127 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback new file mode 100644 index 000000000000..8bb43b66eb55 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback @@ -0,0 +1,17 @@ +What: /sys/module/xen_blkback/parameters/max_buffer_pages +Date: March 2013 +KernelVersion: 3.11 +Contact: Roger Pau Monné <roger.pau@citrix.com> +Description: + Maximum number of free pages to keep in each block + backend buffer. + +What: /sys/module/xen_blkback/parameters/max_persistent_grants +Date: March 2013 +KernelVersion: 3.11 +Contact: Roger Pau Monné <roger.pau@citrix.com> +Description: + Maximum number of grants to map persistently in + blkback. If the frontend tries to use more than + max_persistent_grants, the LRU kicks in and starts + removing 5% of max_persistent_grants every 100ms. diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkfront b/Documentation/ABI/testing/sysfs-driver-xen-blkfront new file mode 100644 index 000000000000..c0a6cb7eb314 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-xen-blkfront @@ -0,0 +1,10 @@ +What: /sys/module/xen_blkfront/parameters/max +Date: June 2013 +KernelVersion: 3.11 +Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> +Description: + Maximum number of segments that the frontend will negotiate + with the backend for indirect descriptors. The default value + is 32 - higher value means more potential throughput but more + memory usage. The backend picks the minimum of the frontend + and its default backend value. diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index cbfdf5486639..fe397f90a34f 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -84,7 +84,7 @@ X!Iinclude/linux/kobject.h <sect1><title>Kernel utility functions</title> !Iinclude/linux/kernel.h -!Ekernel/printk.c +!Ekernel/printk/printk.c !Ekernel/panic.c !Ekernel/sys.c !Ekernel/rcupdate.c diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 6a8b7158697f..9c92bb879b6d 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -1,6 +1,6 @@ <?xml version="1.0"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [ +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ <!ENTITY % media-entities SYSTEM "./media-entities.tmpl"> %media-entities; <!ENTITY media-indices SYSTEM "./media-indices.tmpl"> diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt index c3365f26b2d9..32b6c3189d98 100644 --- a/Documentation/bcache.txt +++ b/Documentation/bcache.txt @@ -46,29 +46,33 @@ you format your backing devices and cache device at the same time, you won't have to manually attach: make-bcache -B /dev/sda /dev/sdb -C /dev/sdc -To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register: +bcache-tools now ships udev rules, and bcache devices are known to the kernel +immediately. Without udev, you can manually register devices like this: echo /dev/sdb > /sys/fs/bcache/register echo /dev/sdc > /sys/fs/bcache/register -To register your bcache devices automatically, you could add something like -this to an init script: +Registering the backing device makes the bcache device show up in /dev; you can +now format it and use it as normal. But the first time using a new bcache +device, it'll be running in passthrough mode until you attach it to a cache. +See the section on attaching. - echo /dev/sd* > /sys/fs/bcache/register_quiet +The devices show up as: -It'll look for bcache superblocks and ignore everything that doesn't have one. + /dev/bcache<N> -Registering the backing device makes the bcache show up in /dev; you can now -format it and use it as normal. But the first time using a new bcache device, -it'll be running in passthrough mode until you attach it to a cache. See the -section on attaching. +As well as (with udev): -The devices show up at /dev/bcacheN, and can be controlled via sysfs from -/sys/block/bcacheN/bcache: + /dev/bcache/by-uuid/<uuid> + /dev/bcache/by-label/<label> + +To get started: mkfs.ext4 /dev/bcache0 mount /dev/bcache0 /mnt +You can control bcache devices through sysfs at /sys/block/bcache<N>/bcache . + Cache devices are managed as sets; multiple caches per set isn't supported yet but will allow for mirroring of metadata and dirty data in the future. Your new cache set shows up as /sys/fs/bcache/<UUID> @@ -80,11 +84,11 @@ must be attached to your cache set to enable caching. Attaching a backing device to a cache set is done thusly, with the UUID of the cache set in /sys/fs/bcache: - echo <UUID> > /sys/block/bcache0/bcache/attach + echo <CSET-UUID> > /sys/block/bcache0/bcache/attach This only has to be done once. The next time you reboot, just reregister all your bcache devices. If a backing device has data in a cache somewhere, the -/dev/bcache# device won't be created until the cache shows up - particularly +/dev/bcache<N> device won't be created until the cache shows up - particularly important if you have writeback caching turned on. If you're booting up and your cache device is gone and never coming back, you @@ -191,6 +195,9 @@ want for getting the best possible numbers when benchmarking. SYSFS - BACKING DEVICE: +Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and +(if attached) /sys/fs/bcache/<cset-uuid>/bdev* + attach Echo the UUID of a cache set to this file to enable caching. @@ -300,6 +307,8 @@ cache_readaheads SYSFS - CACHE SET: +Available at /sys/fs/bcache/<cset-uuid> + average_key_size Average data per key in the btree. @@ -390,6 +399,8 @@ trigger_gc SYSFS - CACHE DEVICE: +Available at /sys/block/<cdev>/bcache + block_size Minimum granularity of writes - should match hardware sector size. diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index edd4b4df3932..786dc82f98ce 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -267,8 +267,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and A: This is what you would need in your kernel code to receive notifications. #include <linux/cpu.h> - static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) + static int foobar_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; @@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications. return NOTIFY_OK; } - static struct notifier_block __cpuinitdata foobar_cpu_notifer = + static struct notifier_block foobar_cpu_notifer = { .notifier_call = foobar_cpu_callback, }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index ab1a56e9de9d..7a2070393732 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -98,6 +98,7 @@ clocks and IDs. fpm 83 mpll_osc_sel 84 mpll_sel 85 + spll_gate 86 Examples: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index a1ee681942cc..6113f9275f42 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -4,7 +4,7 @@ Required properties : - reg : Offset and length of the register set for the device - - compatible : Should be "marvell,mv64xxx-i2c" + - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c" - interrupts : The interrupt number Optional properties : diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index 38e51ad2e07e..a45ae08c8ed1 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -7,9 +7,30 @@ Required properties: - reg: Should contain SSC registers location and length - interrupts: Should contain SSC interrupt -Example: + +Required properties for devices compatible with "atmel,at91sam9g45-ssc": +- dmas: DMA specifier, consisting of a phandle to DMA controller node, + the memory interface and SSC DMA channel ID (for tx and rx). + See Documentation/devicetree/bindings/dma/atmel-dma.txt for details. +- dma-names: Must be "tx", "rx". + +Examples: +- PDC transfer: ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; }; + +- DMA transfer: +ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + dmas = <&dma0 1 13>, + <&dma0 1 14>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index d5a308629c57..30b0581bb1ce 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -31,9 +31,8 @@ Optional nodes: Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) ti,roof-floor - control voltage selection by pin(boolean) - ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, + ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm - ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us ti,smps-range - OTP has the wrong range set for the hardware so override 0 - low range, 1 - high range. @@ -59,7 +58,6 @@ pmic { ti,warm-reset; ti,roof-floor; ti,mode-sleep = <0>; - ti,tstep = <0>; ti,smps-range = <1>; }; diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt new file mode 100644 index 000000000000..669b8140dd79 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt @@ -0,0 +1,65 @@ +Device tree bindings for Marvell PXA SSP ports + +Required properties: + + - compatible: Must be one of + mrvl,pxa25x-ssp + mvrl,pxa25x-nssp + mrvl,pxa27x-ssp + mrvl,pxa3xx-ssp + mvrl,pxa168-ssp + mrvl,pxa910-ssp + mrvl,ce4100-ssp + mrvl,lpss-ssp + + - reg: The memory base + - dmas: Two dma phandles, one for rx, one for tx + - dma-names: Must be "rx", "tx" + + +Example for PXA3xx: + + ssp0: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + ssp-id = <1>; + interrupts = <24>; + clock-names = "pxa27x-ssp.0"; + dmas = <&dma 13 + &dma 14>; + dma-names = "rx", "tx"; + }; + + ssp1: ssp@41700000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41700000 0x40>; + ssp-id = <2>; + interrupts = <16>; + clock-names = "pxa27x-ssp.1"; + dmas = <&dma 15 + &dma 16>; + dma-names = "rx", "tx"; + }; + + ssp2: ssp@41900000 { + compatibl3 = "mrvl,pxa3xx-ssp"; + reg = <0x41900000 0x40>; + ssp-id = <3>; + interrupts = <0>; + clock-names = "pxa27x-ssp.2"; + dmas = <&dma 66 + &dma 67>; + dma-names = "rx", "tx"; + }; + + ssp3: ssp@41a00000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41a00000 0x40>; + ssp-id = <4>; + interrupts = <13>; + clock-names = "pxa27x-ssp.3"; + dmas = <&dma 2 + &dma 3>; + dma-names = "rx", "tx"; + }; + diff --git a/Documentation/devicetree/bindings/sound/ak4554.c b/Documentation/devicetree/bindings/sound/ak4554.c new file mode 100644 index 000000000000..934fa02754b3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4554.c @@ -0,0 +1,11 @@ +AK4554 ADC/DAC + +Required properties: + + - compatible : "asahi-kasei,ak4554" + +Example: + +ak4554-adc-dac { + compatible = "asahi-kasei,ak4554"; +}; diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt index 8608f747dcfe..ffd886d110bd 100644 --- a/Documentation/devicetree/bindings/sound/alc5632.txt +++ b/Documentation/devicetree/bindings/sound/alc5632.txt @@ -13,6 +13,25 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). +Pins on the device (for linking into audio routes): + + * SPK_OUTP + * SPK_OUTN + * HP_OUT_L + * HP_OUT_R + * AUX_OUT_P + * AUX_OUT_N + * LINE_IN_L + * LINE_IN_R + * PHONE_P + * PHONE_N + * MIC1_P + * MIC1_N + * MIC2_P + * MIC2_N + * MICBIAS1 + * DMICDAT + Example: alc5632: alc5632@1e { diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt new file mode 100644 index 000000000000..0720857089a7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt @@ -0,0 +1,35 @@ +* Atmel at91sam9x5ek wm8731 audio complex + +Required properties: + - compatible: "atmel,sam9x5-wm8731-audio" + - atmel,model: The user-visible name of this sound complex. + - atmel,ssc-controller: The phandle of the SSC controller + - atmel,audio-codec: The phandle of the WM8731 audio codec + - atmel,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headphone Jack + * Line In Jack + +wm8731 pins: +cf Documentation/devicetree/bindings/sound/wm8731.txt + +Example: +sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; +}; diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt new file mode 100644 index 000000000000..8bbe50c884b6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt @@ -0,0 +1,55 @@ +Atmel ASoC driver with wm8904 audio codec complex + +Required properties: + - compatible: "atmel,asoc-wm8904" + - atmel,model: The user-visible name of this sound complex. + - atmel,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8904's pins, and the jacks on the board: + + WM8904 pins: + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * MICBIAS + + Board connectors: + + * Headphone Jack + * Line In Jack + * Mic + + - atmel,ssc-controller: The phandle of the SSC controller + - atmel,audio-codec: The phandle of the WM8904 audio codec + +Optional properties: + - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt + +Example: +sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12EK"; + + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt new file mode 100644 index 000000000000..f2ae335670f5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -0,0 +1,54 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock of spdif controller + "rxtx<0-7>" Clock source list for tx and rx clock. + This clock list should be identical to + the source list connecting to the spdif + clock mux in "SPDIF Transceiver Clock + Diagram" of SoC reference manual. It + can also be referred to TxClk_Source + bit of register SPDIF_STC. + +Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 5ff76c9c57d2..4303b6ab6208 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -43,10 +43,22 @@ Required properties: together. This would still allow different sample sizes, but not different sample rates. +Required are also ac97 link bindings if ac97 is used. See +Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary +bindings. + Optional properties: - codec-handle: Phandle to a 'codec' node that defines an audio codec connected to this SSI. This node is typically a child of an I2C or other control node. +- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to + filter the codec stream. This is necessary for some boards + where an incompatible codec is connected to this SSI, e.g. + on pca100 and pcm043. +- dmas: Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq + is not defined. Child 'codec' node required properties: - compatible: Compatible list, contains the name of the codec diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index 215aa9817213..f88a00e54c63 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -5,6 +5,15 @@ Required properties: or "fsl,imx31-audmux" for the version firstly used on i.MX31. - reg : Should contain AUDMUX registers location and length +An initial configuration can be setup using child nodes. + +Required properties of optional child nodes: +- fsl,audmux-port : Integer of the audmux port that is configured by this + child node. +- fsl,port-config : List of configuration options for the specific port. For + imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For + imx21-audmux it is a list of pcr values. + Example: audmux@021d8000 { diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt new file mode 100644 index 000000000000..74c9ba6c2823 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt @@ -0,0 +1,28 @@ +Marvell PXA SSP CPU DAI bindings + +Required properties: + + compatible Must be "mrvl,pxa-ssp-dai" + port A phandle reference to a PXA ssp upstream device + +Example: + + /* upstream device */ + + ssp0: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + interrupts = <24>; + clock-names = "pxa27x-ssp.0"; + dmas = <&dma 13 + &dma 14>; + dma-names = "rx", "tx"; + }; + + /* DAI as user */ + + ssp_dai0: ssp_dai@0 { + compatible = "mrvl,pxa-ssp-dai"; + port = <&ssp0>; + }; + diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt new file mode 100644 index 000000000000..551fbb8348c2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt @@ -0,0 +1,15 @@ +DT bindings for ARM PXA2xx PCM platform driver + +This is just a dummy driver that registers the PXA ASoC platform driver. +It does not have any resources assigned. + +Required properties: + + - compatible 'mrvl,pxa-pcm-audio' + +Example: + + pxa_pcm_audio: snd_soc_pxa_audio { + compatible = "mrvl,pxa-pcm-audio"; + }; + diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt index 05ffecb57103..8b8903ef0800 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt @@ -11,28 +11,8 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the ALC5632's pins: - - ALC5632 pins: - - * SPK_OUTP - * SPK_OUTN - * HP_OUT_L - * HP_OUT_R - * AUX_OUT_P - * AUX_OUT_N - * LINE_IN_L - * LINE_IN_R - * PHONE_P - * PHONE_N - * MIC1_P - * MIC1_N - * MIC2_P - * MIC2_N - * MICBIAS1 - * DMICDAT - - Board connectors: + sinks are the ALC5632's pins as documented in the binding for the device + and: * Headset Stereophone * Int Spk diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt index d130818700b2..dc6224994d69 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt @@ -11,32 +11,12 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the RT5640's pins, and the jacks on the board: - - RT5640 pins: - - * DMIC1 - * DMIC2 - * MICBIAS1 - * IN1P - * IN1R - * IN2P - * IN2R - * HPOL - * HPOR - * LOUTL - * LOUTR - * MONOP - * MONON - * SPOLP - * SPOLN - * SPORP - * SPORN - - Board connectors: + sinks are the RT5640's pins (as documented in its binding), and the jacks + on the board: * Headphones * Speakers + * Mic Jack - nvidia,i2s-controller : The phandle of the Tegra I2S controller that's connected to the CODEC. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index 3bf722deb722..4b44dfb6ca0d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -11,28 +11,8 @@ Required properties: - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources and - sinks are the WM8903's pins, and the jacks on the board: - - WM8903 pins: - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * DMICDAT - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * LOP - * LON - * ROP - * RON - * MICBIAS - - Board connectors: + sinks are the WM8903's pins (documented in the WM8903 binding document), + and the jacks on the board: * Headphone Jack * Int Spk diff --git a/Documentation/devicetree/bindings/sound/pcm1792a.txt b/Documentation/devicetree/bindings/sound/pcm1792a.txt new file mode 100644 index 000000000000..970ba1ed576f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm1792a.txt @@ -0,0 +1,18 @@ +Texas Instruments pcm1792a DT bindings + +This driver supports the SPI bus. + +Required properties: + + - compatible: "ti,pcm1792a" + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Examples: + + codec_spi: 1792a@0 { + compatible = "ti,pcm1792a"; + spi-max-frequency = <600000>; + }; + diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index 005bcb24d72d..068a1141b06f 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -18,6 +18,26 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. +Pins on the device (for linking into audio routes): + + * DMIC1 + * DMIC2 + * MICBIAS1 + * IN1P + * IN1R + * IN2P + * IN2R + * HPOL + * HPOR + * LOUTL + * LOUTR + * MONOP + * MONON + * SPOLP + * SPOLN + * SPORP + * SPORN + Example: rt5640 { diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 025e66b85a43..7386d444ada1 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -2,7 +2,15 @@ Required SoC Specific Properties: -- compatible : "samsung,i2s-v5" +- compatible : should be one of the following. + - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. + - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with + secondary fifo, s/w reset control and internal mux for root clk src. + - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with + secondary fifo, s/w reset control, internal mux for root clk src and + TDM support. TDM (Time division multiplexing) is to allow transfer of + multiple channel audio data on single data line. + - reg: physical base address of the controller and length of memory mapped region. - dmas: list of DMA controller phandle and DMA request line ordered pairs. @@ -21,13 +29,6 @@ Required SoC Specific Properties: Optional SoC Specific Properties: -- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel - support, this flag is enabled. -- samsung,supports-rstclr: This flag should be set if I2S software reset bit - control is required. When this flag is set I2S software reset bit will be - enabled or disabled based on need. -- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA, - then this flag is enabled. - samsung,idma-addr: Internal DMA register base address of the audio sub system(used in secondary sound source). - pinctrl-0: Should specify pin control groups used for this controller. @@ -36,7 +37,7 @@ Optional SoC Specific Properties: Example: i2s0: i2s@03830000 { - compatible = "samsung,i2s-v5"; + compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -46,9 +47,6 @@ i2s0: i2s@03830000 { <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,supports-6ch; - samsung,supports-rstclr; - samsung,supports-secdai; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt new file mode 100644 index 000000000000..80152a87f239 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt @@ -0,0 +1,28 @@ +AC97 link bindings + +These bindings can be included within any other device node. + +Required properties: + - pinctrl-names: Has to contain following states to setup the correct + pinmuxing for the used gpios: + "ac97-running": AC97-link is active + "ac97-reset": AC97-link reset state + "ac97-warm-reset": AC97-link warm reset state + - ac97-gpios: List of gpio phandles with args in the order ac97-sync, + ac97-sdata, ac97-reset + + +Example: + +ssi { + ... + + pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset"; + pinctrl-0 = <&ac97link_running>; + pinctrl-1 = <&ac97link_running>; + pinctrl-2 = <&ac97link_reset>; + pinctrl-3 = <&ac97link_warm_reset>; + ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>; + + ... +}; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt new file mode 100644 index 000000000000..4df17185ab80 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt @@ -0,0 +1,15 @@ +Texas Instruments PCM1681 8-channel PWM Processor + +Required properties: + + - compatible: Should contain "ti,pcm1681". + - reg: The i2c address. Should contain <0x4c>. + +Examples: + + i2c_bus { + pcm1681@4c { + compatible = "ti,pcm1681"; + reg = <0x4c>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt index 15f70048469b..236690e99b87 100644 --- a/Documentation/devicetree/bindings/sound/wm8731.txt +++ b/Documentation/devicetree/bindings/sound/wm8731.txt @@ -16,3 +16,12 @@ codec: wm8731@1a { compatible = "wlf,wm8731"; reg = <0x1a>; }; + +Available audio endpoints for an audio-routing table: + * LOUT: Left Channel Line Output + * ROUT: Right Channel Line Output + * LHPOUT: Left Channel Headphone Output + * RHPOUT: Right Channel Headphone Output + * LLINEIN: Left Channel Line Input + * RLINEIN: Right Channel Line Input + * MICIN: Microphone Input diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt index f102cbc42694..94ec32c194bb 100644 --- a/Documentation/devicetree/bindings/sound/wm8903.txt +++ b/Documentation/devicetree/bindings/sound/wm8903.txt @@ -28,6 +28,25 @@ Optional properties: performed. If any entry has the value 0xffffffff, that GPIO's configuration will not be modified. +Pins on the device (for linking into audio routes): + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * DMICDAT + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * LOP + * LON + * ROP + * RON + * MICBIAS + Example: codec: wm8903@1a { diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d5a79caec147..366ce9b87240 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -26,6 +26,7 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. @@ -43,6 +44,7 @@ nxp NXP Semiconductors onnn ON Semiconductor Corp. picochip Picochip Ltd powervr PowerVR (deprecated, use img) +qca Qualcomm Atheros, Inc. qcom Qualcomm, Inc. ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index 050d37fe6d40..8148a47fc70e 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a fork. So if you have any comments or updates for this file, please try to update the original English file first. -Last Updated: 2011/03/31 +Last Updated: 2013/07/19 ================================== これは、 -linux-2.6.38/Documentation/HOWTO +linux-3.10/Documentation/HOWTO の和訳です。 -翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日： 2011/3/28 +翻訳団体： JF プロジェクト < http://linuxjf.sourceforge.jp/ > +翻訳日： 2013/7/19 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> 校正者： 松倉さん <nbh--mats at nifty dot com> 小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp> @@ -245,7 +245,7 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、 自己参照方式で、索引がついた web 形式で、ソースコードを参照することが できます。この最新の素晴しいカーネルコードのリポジトリは以下で見つかり ます- - http://sosdg.org/~qiyong/lxr/ + http://lxr.linux.no/+trees 開発プロセス ----------------------- @@ -253,24 +253,24 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、 Linux カーネルの開発プロセスは現在幾つかの異なるメインカーネル「ブラン チ」と多数のサブシステム毎のカーネルブランチから構成されます。 これらのブランチとは- - - メインの 2.6.x カーネルツリー - - 2.6.x.y -stable カーネルツリー - - 2.6.x -git カーネルパッチ + - メインの 3.x カーネルツリー + - 3.x.y -stable カーネルツリー + - 3.x -git カーネルパッチ - サブシステム毎のカーネルツリーとパッチ - - 統合テストのための 2.6.x -next カーネルツリー + - 統合テストのための 3.x -next カーネルツリー -2.6.x カーネルツリー +3.x カーネルツリー ----------------- -2.6.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org -の pub/linux/kernel/v2.6/ ディレクトリに存在します。この開発プロセスは +3.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org +の pub/linux/kernel/v3.x/ ディレクトリに存在します。この開発プロセスは 以下のとおり- - 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、 この期間中に、メンテナ達は Linus に大きな差分を送ることができます。 このような差分は通常 -next カーネルに数週間含まれてきたパッチです。 大きな変更は git(カーネルのソース管理ツール、詳細は - http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ + http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ チファイルの形式のまま送るのでも十分です。 - 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定 @@ -302,20 +302,20 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー 実に認識されたバグの状況によりリリースされるのであり、前もって決めら れた計画によってリリースされるものではないからです。」 -2.6.x.y -stable カーネルツリー +3.x.y -stable カーネルツリー --------------------------- -バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。 -これには、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対 +バージョン番号が3つの数字に分かれているカーネルは -stable カーネルです。 +これには、3.x カーネルで見つかったセキュリティ問題や重大な後戻りに対 する比較的小さい重要な修正が含まれます。 これは、開発/実験的バージョンのテストに協力することに興味が無く、 最新の安定したカーネルを使いたいユーザに推奨するブランチです。 -もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が +もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が 最新の安定版カーネルです。 -2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必 +3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ た問題がなければもう少し長くなることもあります。セキュリティ関連の問題 の場合はこれに対してだいたいの場合、すぐにリリースがされます。 @@ -324,7 +324,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ リースプロセスがどう動くかが記述されています。 -2.6.x -git パッチ +3.x -git パッチ ------------------ git リポジトリで管理されているLinus のカーネルツリーの毎日のスナップ @@ -358,14 +358,14 @@ quilt シリーズとして公開されているパッチキューも使われ をつけることができます。大部分のこれらの patchwork のサイトは http://patchwork.kernel.org/ でリストされています。 -統合テストのための 2.6.x -next カーネルツリー +統合テストのための 3.x -next カーネルツリー --------------------------------------------- -サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ +サブシステムツリーの更新内容がメインラインの 3.x ツリーにマージされ る前に、それらは統合テストされる必要があります。この目的のため、実質的 に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ ポジトリが存在します- - http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git + http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git http://linux.f-seidel.de/linux-next/pmwiki/ このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 1c15043aaee4..d569f2a424d5 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -52,7 +52,7 @@ Default: 64 busy_read ---------------- -Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL) +Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL) Approximate time in us to busy loop waiting for packets on the device queue. This sets the default value of the SO_BUSY_POLL socket option. Can be set or overridden per socket by setting socket option SO_BUSY_POLL, @@ -63,7 +63,7 @@ Default: 0 (off) busy_poll ---------------- -Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL) +Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL) Approximate time in us to busy loop waiting for events. Recommended value depends on the number of sockets you poll on. For several sockets 50, for several hundreds 100. |
