diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/device-mapper/dm-raid.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/clock/uniphier-clock.txt | 16 | ||||
| -rw-r--r-- | Documentation/gpio/board.txt | 11 |
3 files changed, 16 insertions, 12 deletions
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index e5b6497116f4..c75b64a85859 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -309,3 +309,4 @@ Version History with a reshape in progress. 1.9.0 Add support for RAID level takeover/reshape/region size and set size reduction. +1.9.1 Fix activation of existing RAID 4/10 mapped devices diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt index c7179d3b5c33..812163060fa3 100644 --- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt +++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt @@ -24,7 +24,7 @@ Example: reg = <0x61840000 0x4000>; clock { - compatible = "socionext,uniphier-ld20-clock"; + compatible = "socionext,uniphier-ld11-clock"; #clock-cells = <1>; }; @@ -43,8 +43,8 @@ Provided clocks: 21: USB3 ch1 PHY1 -Media I/O (MIO) clock ---------------------- +Media I/O (MIO) clock, SD clock +------------------------------- Required properties: - compatible: should be one of the following: @@ -52,10 +52,10 @@ Required properties: "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC. + "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. + "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-mio-clock" - for LD20 SoC. + "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - #clock-cells: should be 1. Example: @@ -66,7 +66,7 @@ Example: reg = <0x59810000 0x800>; clock { - compatible = "socionext,uniphier-ld20-mio-clock"; + compatible = "socionext,uniphier-ld11-mio-clock"; #clock-cells = <1>; }; @@ -112,7 +112,7 @@ Example: reg = <0x59820000 0x200>; clock { - compatible = "socionext,uniphier-ld20-peri-clock"; + compatible = "socionext,uniphier-ld11-peri-clock"; #clock-cells = <1>; }; diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 40884c4fe40c..a0f61898d493 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a description of the deprecated integer-based GPIO interface please refer to gpio-legacy.txt (actually, there is no real mapping possible with the old interface; you just fetch an integer from somewhere and request the -corresponding GPIO. +corresponding GPIO). All platforms can enable the GPIO library, but if the platform strictly requires GPIO functionality to be present, it needs to select GPIOLIB from its @@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: Since the "led" GPIOs are mapped as active-high, this example will switch their signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped -as active-low, its actual signal will be 0 after this code. Contrary to the legacy -integer GPIO interface, the active-low property is handled during mapping and is -thus transparent to GPIO consumers. +as active-low, its actual signal will be 0 after this code. Contrary to the +legacy integer GPIO interface, the active-low property is handled during +mapping and is thus transparent to GPIO consumers. + +A set of functions such as gpiod_set_value() is available to work with +the new descriptor-oriented interface. |
