diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/iommu/qcom,iommu.txt | 121 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/iommu/rockchip,iommu.txt | 5 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt | 15 | ||||
| -rw-r--r-- | Documentation/networking/switchdev.txt | 4 | ||||
| -rw-r--r-- | Documentation/printk-formats.txt | 19 | ||||
| -rw-r--r-- | Documentation/sysctl/net.txt | 47 |
6 files changed, 190 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt new file mode 100644 index 000000000000..b2641ceb2b40 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -0,0 +1,121 @@ +* QCOM IOMMU v1 Implementation + +Qualcomm "B" family devices which are not compatible with arm-smmu have +a similar looking IOMMU but without access to the global register space, +and optionally requiring additional configuration to route context irqs +to non-secure vs secure interrupt line. + +** Required properties: + +- compatible : Should be one of: + + "qcom,msm8916-iommu" + + Followed by "qcom,msm-iommu-v1". + +- clock-names : Should be a pair of "iface" (required for IOMMUs + register group access) and "bus" (required for + the IOMMUs underlying bus access). + +- clocks : Phandles for respective clocks described by + clock-names. + +- #address-cells : must be 1. + +- #size-cells : must be 1. + +- #iommu-cells : Must be 1. Index identifies the context-bank #. + +- ranges : Base address and size of the iommu context banks. + +- qcom,iommu-secure-id : secure-id. + +- List of sub-nodes, one per translation context bank. Each sub-node + has the following required properties: + + - compatible : Should be one of: + - "qcom,msm-iommu-v1-ns" : non-secure context bank + - "qcom,msm-iommu-v1-sec" : secure context bank + - reg : Base address and size of context bank within the iommu + - interrupts : The context fault irq. + +** Optional properties: + +- reg : Base address and size of the SMMU local base, should + be only specified if the iommu requires configuration + for routing of context bank irq's to secure vs non- + secure lines. (Ie. if the iommu contains secure + context banks) + + +** Examples: + + apps_iommu: iommu@1e20000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1e20000 0x40000>; + reg = <0x1ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + // mdp_0: + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + + // venus_ns: + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + // gfx3d_user: + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + }; + + // gfx3d_priv: + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + ... + + venus: video-codec@1d00000 { + ... + iommus = <&apps_iommu 5>; + }; + + mdp: mdp@1a01000 { + ... + iommus = <&apps_iommu 4>; + }; + + gpu@01c00000 { + ... + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + }; diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt index 9a55ac3735e5..2098f7732264 100644 --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt @@ -15,6 +15,11 @@ Required properties: to associate with its master device. See: Documentation/devicetree/bindings/iommu/iommu.txt +Optional properties: +- rockchip,disable-mmu-reset : Don't use the mmu reset operation. + Some mmu instances may produce unexpected results + when the reset operation is used. + Example: vopl_mmu: iommu@ff940300 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt index 21277a56e94c..ddf46b8856a5 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -15,6 +15,9 @@ Required properties: the register. - "smi" : It's the clock for transfer data and command. +Required property for mt2701: +- mediatek,larb-id :the hardware id of this larb. + Example: larb1: larb@16010000 { compatible = "mediatek,mt8173-smi-larb"; @@ -25,3 +28,15 @@ Example: <&vdecsys CLK_VDEC_LARB_CKEN>; clock-names = "apb", "smi"; }; + +Example for mt2701: + larb0: larb@14010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt index 3e7b946dea27..5e40e1f68873 100644 --- a/Documentation/networking/switchdev.txt +++ b/Documentation/networking/switchdev.txt @@ -228,7 +228,7 @@ Learning on the device port should be enabled, as well as learning_sync: bridge link set dev DEV learning on self bridge link set dev DEV learning_sync on self -Learning_sync attribute enables syncing of the learned/forgotton FDB entry to +Learning_sync attribute enables syncing of the learned/forgotten FDB entry to the bridge's FDB. It's possible, but not optimal, to enable learning on the device port and on the bridge port, and disable learning_sync. @@ -245,7 +245,7 @@ the responsibility of the port driver/device to age out these entries. If the port device supports ageing, when the FDB entry expires, it will notify the driver which in turn will notify the bridge with SWITCHDEV_FDB_DEL. If the device does not support ageing, the driver can simulate ageing using a -garbage collection timer to monitor FBD entries. Expired entries will be +garbage collection timer to monitor FDB entries. Expired entries will be notified to the bridge using SWITCHDEV_FDB_DEL. See rocker driver for example of driver running ageing timer. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 65ea5915178b..074670b98bac 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -58,20 +58,23 @@ Symbols/Function Pointers %ps versatile_init %pB prev_fn_of_versatile_init+0x88/0x88 -For printing symbols and function pointers. The ``S`` and ``s`` specifiers -result in the symbol name with (``S``) or without (``s``) offsets. Where -this is used on a kernel without KALLSYMS - the symbol address is -printed instead. +The ``F`` and ``f`` specifiers are for printing function pointers, +for example, f->func, &gettimeofday. They have the same result as +``S`` and ``s`` specifiers. But they do an extra conversion on +ia64, ppc64 and parisc64 architectures where the function pointers +are actually function descriptors. + +The ``S`` and ``s`` specifiers can be used for printing symbols +from direct addresses, for example, __builtin_return_address(0), +(void *)regs->ip. They result in the symbol name with (``S``) or +without (``s``) offsets. If KALLSYMS are disabled then the symbol +address is printed instead. The ``B`` specifier results in the symbol name with offsets and should be used when printing stack backtraces. The specifier takes into consideration the effect of compiler optimisations which may occur when tail-call``s are used and marked with the noreturn GCC attribute. -On ia64, ppc64 and parisc64 architectures function pointers are -actually function descriptors which must first be resolved. The ``F`` and -``f`` specifiers perform this resolution and then provide the same -functionality as the ``S`` and ``s`` specifiers. Kernel Pointers =============== diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 14db18c970b1..28596e03220b 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -35,9 +35,34 @@ Table : Subdirectories in /proc/sys/net bpf_jit_enable -------------- -This enables Berkeley Packet Filter Just in Time compiler. -Currently supported on x86_64 architecture, bpf_jit provides a framework -to speed packet filtering, the one used by tcpdump/libpcap for example. +This enables the BPF Just in Time (JIT) compiler. BPF is a flexible +and efficient infrastructure allowing to execute bytecode at various +hook points. It is used in a number of Linux kernel subsystems such +as networking (e.g. XDP, tc), tracing (e.g. kprobes, uprobes, tracepoints) +and security (e.g. seccomp). LLVM has a BPF back end that can compile +restricted C into a sequence of BPF instructions. After program load +through bpf(2) and passing a verifier in the kernel, a JIT will then +translate these BPF proglets into native CPU instructions. There are +two flavors of JITs, the newer eBPF JIT currently supported on: + - x86_64 + - arm64 + - ppc64 + - sparc64 + - mips64 + - s390x + +And the older cBPF JIT supported on the following archs: + - arm + - mips + - ppc + - sparc + +eBPF JITs are a superset of cBPF JITs, meaning the kernel will +migrate cBPF instructions into eBPF instructions and then JIT +compile them transparently. Older cBPF JITs can only translate +tcpdump filters, seccomp rules, etc, but not mentioned eBPF +programs loaded through bpf(2). + Values : 0 - disable the JIT (default value) 1 - enable the JIT @@ -46,9 +71,9 @@ Values : bpf_jit_harden -------------- -This enables hardening for the Berkeley Packet Filter Just in Time compiler. -Supported are eBPF JIT backends. Enabling hardening trades off performance, -but can mitigate JIT spraying. +This enables hardening for the BPF JIT compiler. Supported are eBPF +JIT backends. Enabling hardening trades off performance, but can +mitigate JIT spraying. Values : 0 - disable JIT hardening (default value) 1 - enable JIT hardening for unprivileged users only @@ -57,11 +82,11 @@ Values : bpf_jit_kallsyms ---------------- -When Berkeley Packet Filter Just in Time compiler is enabled, then compiled -images are unknown addresses to the kernel, meaning they neither show up in -traces nor in /proc/kallsyms. This enables export of these addresses, which -can be used for debugging/tracing. If bpf_jit_harden is enabled, this feature -is disabled. +When BPF JIT compiler is enabled, then compiled images are unknown +addresses to the kernel, meaning they neither show up in traces nor +in /proc/kallsyms. This enables export of these addresses, which can +be used for debugging/tracing. If bpf_jit_harden is enabled, this +feature is disabled. Values : 0 - disable JIT kallsyms export (default value) 1 - enable JIT kallsyms export for privileged users only |
