diff options
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 148 |
1 files changed, 142 insertions, 6 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 87d76a5c73d0..e6b57dd46a4f 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -472,6 +472,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-darla20 + ------------------ + + Module for Echoaudio Darla20 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + + Module snd-darla24 + ------------------ + + Module for Echoaudio Darla24 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-dt019x ----------------- @@ -499,6 +515,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-echo3g + ----------------- + + Module for Echoaudio 3G cards (Gina3G/Layla3G) + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-emu10k1 ------------------ @@ -657,6 +681,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-gina20 + ----------------- + + Module for Echoaudio Gina20 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + + Module snd-gina24 + ----------------- + + Module for Echoaudio Gina24 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-gusclassic --------------------- @@ -718,6 +758,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) single_cmd - Use single immediate commands to communicate with codecs (for debugging only) + disable_msi - Disable Message Signaled Interrupt (MSI) This module supports one card and autoprobe. @@ -738,11 +779,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack-digout 6-jack with a SPDIF out w810 3-jack z71v 3-jack (HP shared SPDIF) - asus 3-jack + asus 3-jack (ASUS Mobo) + asus-w1v ASUS W1V + asus-dig ASUS with SPDIF out + asus-dig2 ASUS with SPDIF out (using GPIO2) uniwill 3-jack F1734 2-jack lg LG laptop (m1 express dual) - lg-lw LG LW20 laptop + lg-lw LG LW20/LW25 laptop + tcl TCL S700 + clevo Clevo laptops (m520G, m665n) test for testing/debugging purpose, almost all controls can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y @@ -750,6 +796,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC260 hp HP machines + hp-3013 HP machines (3013-variant) fujitsu Fujitsu S7020 acer Acer TravelMate basic fixed pin assignment (old default model) @@ -757,18 +804,32 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC262 fujitsu Fujitsu Laptop + hp-bpc HP xw4400/6400/8400/9400 laptops + benq Benq ED8 basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default) - ALC882/883/885 + ALC882/885 3stack-dig 3-jack with SPDIF I/O 6stck-dig 6-jack digital with SPDIF I/O + arima Arima W820Di1 + auto auto-config reading BIOS (default) + + ALC883/888 + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack digital with SPDIF I/O + 3stack-6ch 3-jack 6-channel + 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O + 6stack-dig-demo 6-jack digital for Intel demo board + acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) auto auto-config reading BIOS (default) - ALC861 + ALC861/660 3stack 3-jack 3stack-dig 3-jack with SPDIF I/O 6stack-dig 6-jack with SPDIF I/O + 3stack-660 3-jack (for ALC660) + uniwill-m31 Uniwill M31 laptop auto auto-config reading BIOS (default) CMI9880 @@ -797,10 +858,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-dig ditto with SPDIF laptop 3-jack with hp-jack automute laptop-dig ditto with SPDIF - auto auto-confgi reading BIOS (default) + auto auto-config reading BIOS (default) + + STAC9200/9205/9220/9221/9254 + ref Reference board + 3stack D945 3stack + 5stack D945 5stack + SPDIF + + STAC9227/9228/9229/927x + ref Reference board + 3stack D965 3stack + 5stack D965 5stack + SPDIF - STAC7661(?) + STAC9872 vaio Setup for VAIO FE550G/SZ110 + vaio-ar Setup for VAIO AR If the default configuration doesn't work and one of the above matches with your device, report it together with the PCI @@ -937,6 +1009,30 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. driver isn't configured properly or you want to try another type for testing. + Module snd-indigo + ----------------- + + Module for Echoaudio Indigo + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + + Module snd-indigodj + ------------------- + + Module for Echoaudio Indigo DJ + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + + Module snd-indigoio + ------------------- + + Module for Echoaudio Indigo IO + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-intel8x0 ------------------- @@ -1036,6 +1132,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards. + Module snd-layla20 + ------------------ + + Module for Echoaudio Layla20 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + + Module snd-layla24 + ------------------ + + Module for Echoaudio Layla24 + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-maestro3 ------------------- @@ -1056,6 +1168,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-mia + --------------- + + Module for Echoaudio Mia + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-miro --------------- @@ -1088,6 +1208,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. When no hotplug fw loader is available, you need to load the firmware via mixartloader utility in alsa-tools package. + Module snd-mona + --------------- + + Module for Echoaudio Mona + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-mpu401 ----------------- @@ -1111,6 +1239,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports only 1 card. This module has no enable option. + Module snd-mts64 + ---------------- + + Module for Ego Systems (ESI) Miditerminal 4140 + + This module supports multiple devices. + Requires parport (CONFIG_PARPORT). + Module snd-nm256 ---------------- |
