diff options
Diffstat (limited to 'Documentation/devicetree')
26 files changed, 439 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index f4006d3c9fdf..c760ecb81381 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -30,7 +30,6 @@ compatible: Optional properties: - dma-coherent : Present if dma operations are coherent - clocks : a list of phandle + clock specifier pairs -- resets : a list of phandle + reset specifier pairs - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 0047b1394c70..2c887536258c 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -14,7 +14,13 @@ Required properties: "adi,adv7513" "adi,adv7533" -- reg: I2C slave address +- reg: I2C slave addresses + The ADV7511 internal registers are split into four pages exposed through + different I2C addresses, creating four register maps. Each map has it own + I2C address and acts as a standard slave device on the I2C bus. The main + address is mandatory, others are optional and revert to defaults if not + specified. + The ADV7511 supports a large number of input data formats that differ by their color depth, color format, clock mode, bit justification and random @@ -70,6 +76,9 @@ Optional properties: rather than generate its own timings for HDMI output. - clocks: from common clock binding: reference to the CEC clock. - clock-names: from common clock binding: must be "cec". +- reg-names : Names of maps with programmable addresses. + It can contain any map needing a non-default address. + Possible maps names are : "main", "edid", "cec", "packet" Required nodes: @@ -88,7 +97,12 @@ Example adv7511w: hdmi@39 { compatible = "adi,adv7511w"; - reg = <39>; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; clocks = <&cec_clock>; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt new file mode 100644 index 000000000000..f5725bb6c61c --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -0,0 +1,133 @@ +Cadence DSI bridge +================== + +The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. + +Required properties: +- compatible: should be set to "cdns,dsi". +- reg: physical base address and length of the controller's registers. +- interrupts: interrupt line connected to the DSI bridge. +- clocks: DSI bridge clocks. +- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". +- phys: phandle link to the MIPI D-PHY controller. +- phy-names: must contain "dphy". +- #address-cells: must be set to 1. +- #size-cells: must be set to 0. + +Optional properties: +- resets: DSI reset lines. +- reset-names: can contain "dsi_p_rst". + +Required subnodes: +- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. + 2 ports are available: + * port 0: this port is only needed if some of your DSI devices are + controlled through an external bus like I2C or SPI. Can have at + most 4 endpoints. The endpoint number is directly encoding the + DSI virtual channel used by this device. + * port 1: represents the DPI input. + Other ports will be added later to support the new kind of inputs. + +- one subnode per DSI device connected on the DSI bus. Each DSI device should + contain a reg property encoding its virtual channel. + +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + }; + + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel: dsi-dev@0 { + compatible = "<vendor,panel>"; + reg = <0>; + }; + }; + +or + + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi0_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + + i2c@xxx { + panel: panel@59 { + compatible = "<vendor,panel>"; + reg = <0x59>; + + port { + dsi_panel_input: endpoint { + remote-endpoint = <&dsi0_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index 3a72a103a18a..a41d280c3f9f 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -14,6 +14,7 @@ Required properties: - compatible : Shall contain one or more of - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX + - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX When compatible with generic versions, nodes must list the SoC-specific diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index 24cc2466185a..1a4eaca40d94 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -27,6 +27,9 @@ Optional properties: in question is used. The implementation allows one or two DAIs. If two DAIs are defined, they must be of different type. + - nxp,calib-gpios: calibration GPIO, which must correspond with the + gpio used for the TDA998x interrupt pin. + [1] Documentation/sound/alsa/soc/DAI.txt [2] include/dt-bindings/display/tda998x.h diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt new file mode 100644 index 000000000000..37f0c04d5a28 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt @@ -0,0 +1,60 @@ +Thine Electronics THC63LVD1024 LVDS decoder +------------------------------------------- + +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams +to parallel data outputs. The chip supports single/dual input/output modes, +handling up to two LVDS input streams and up to two digital CMOS/TTL outputs. + +Single or dual operation mode, output data mapping and DDR output modes are +configured through input signals and the chip does not expose any control bus. + +Required properties: +- compatible: Shall be "thine,thc63lvd1024" +- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input, + PPL and digital circuitry + +Optional properties: +- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low +- oe-gpios: Output enable GPIO signal, pin name "OE". Active high + +The THC63LVD1024 video port connections are modeled according +to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt + +Required video port nodes: +- port@0: First LVDS input port +- port@2: First digital CMOS/TTL parallel output + +Optional video port nodes: +- port@1: Second LVDS input port +- port@3: Second digital CMOS/TTL parallel output + +Example: +-------- + + thc63lvd1024: lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2{ + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt index 557fa765adcb..5d2519af4bb5 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt @@ -38,7 +38,7 @@ Display Timings require specific display timings. The panel-timing subnode expresses those timings as specified in the timing subnode section of the display timing bindings defined in - Documentation/devicetree/bindings/display/display-timing.txt. + Documentation/devicetree/bindings/display/panel/display-timing.txt. Connectivity diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index c9cd17f99702..7c6854bd0a04 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -13,6 +13,7 @@ Required Properties: - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU + - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU @@ -47,20 +48,21 @@ bindings specified in Documentation/devicetree/bindings/graph.txt. The following table lists for each supported model the port number corresponding to each DU output. - Port0 Port1 Port2 Port3 + Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- - R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - - R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - - R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - - R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - - R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 - R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - - R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - - R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 - + R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - + R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - + R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - + R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - + R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - + R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - + R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 + R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - + R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 - + R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - + R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 - Example: R8A7795 (R-Car H3) ES2.0 DU diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt new file mode 100644 index 000000000000..6a6cf5de08b0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt @@ -0,0 +1,93 @@ +Allwinner A31 DSI Encoder +========================= + +The DSI pipeline consists of two separate blocks: the DSI controller +itself, and its associated D-PHY. + +DSI Encoder +----------- + +The DSI Encoder generates the DSI signal from the TCON's. + +Required properties: + - compatible: value must be one of: + * allwinner,sun6i-a31-mipi-dsi + - reg: base address and size of memory-mapped region + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the DSI encoder + * bus: the DSI interface clock + * mod: the DSI module clock + - clock-names: the clock names mentioned above + - phys: phandle to the D-PHY + - phy-names: must be "dphy" + - resets: phandle to the reset controller driving the encoder + + - ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint, usually coming from the + associated TCON. + +Any MIPI-DSI device attached to this should be described according to +the bindings defined in ../mipi-dsi-bus.txt + +D-PHY +----- + +Required properties: + - compatible: value must be one of: + * allwinner,sun6i-a31-mipi-dphy + - reg: base address and size of memory-mapped region + - clocks: phandles to the clocks feeding the DSI encoder + * bus: the DSI interface clock + * mod: the DSI module clock + - clock-names: the clock names mentioned above + - resets: phandle to the reset controller driving the encoder + +Example: + +dsi0: dsi@1ca0000 { + compatible = "allwinner,sun6i-a31-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy0>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */ + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + dsi0_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi0>; + }; + }; + }; +}; + +dphy0: d-phy@1ca1000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index aadfb236d53a..61315eaa7660 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -26,6 +26,7 @@ Required Properties: - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) - "renesas,dmac-r8a7796" (R-Car M3-W) + - "renesas,dmac-r8a77965" (R-Car M3-N) - "renesas,dmac-r8a77970" (R-Car V3M) - "renesas,dmac-r8a77980" (R-Car V3H) diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt new file mode 100644 index 000000000000..c907aa8dd755 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt @@ -0,0 +1,28 @@ +Broadcom V3D GPU + +Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. +For V3D 2.x, see brcm,bcm-vc4.txt. + +Required properties: +- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" +- reg: Physical base addresses and lengths of the register areas +- reg-names: Names for the register areas. The "hub", "bridge", and "core0" + register areas are always required. The "gca" register area + is required if the GCA cache controller is present. +- interrupts: The interrupt numbers. The first interrupt is for the hub, + while the following interrupts are for the cores. + See bindings/interrupt-controller/interrupts.txt + +Optional properties: +- clocks: The core clock the unit runs on + +v3d { + compatible = "brcm,7268-v3d"; + reg = <0xf1204000 0x100>, + <0xf1200000 0x4000>, + <0xf1208000 0x4000>, + <0xf1204100 0x100>; + reg-names = "bridge", "hub", "core0", "gca"; + interrupts = <0 78 4>, + <0 77 4>; +}; diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.txt b/Documentation/devicetree/bindings/gpu/samsung-scaler.txt new file mode 100644 index 000000000000..9c3d98105dfd --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.txt @@ -0,0 +1,27 @@ +* Samsung Exynos Image Scaler + +Required properties: + - compatible : value should be one of the following: + (a) "samsung,exynos5420-scaler" for Scaler IP in Exynos5420 + (b) "samsung,exynos5433-scaler" for Scaler IP in Exynos5433 + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : Interrupt specifier for scaler interrupt, according to format + specific to interrupt parent. + + - clocks : Clock specifier for scaler clock, according to generic clock + bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt) + + - clock-names : Names of clocks. For exynos scaler, it should be "mscl" + on 5420 and "pclk", "aclk" and "aclk_xiu" on 5433. + +Example: + scaler@12800000 { + compatible = "samsung,exynos5420-scaler"; + reg = <0x12800000 0x1294>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MSCL0>; + clock-names = "mscl"; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 23e3abc3fdef..c88919480d37 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -4,6 +4,13 @@ Required properties: - compatible: atmel,maxtouch + The following compatibles have been used in various products but are + deprecated: + atmel,qt602240_ts + atmel,atmel_mxt_ts + atmel,atmel_mxt_tp + atmel,mXT224 + - reg: The I2C address of the device - interrupts: The sink for the touchpad's IRQ output diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt index 93c3a6ae32f9..ac71daa46195 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt @@ -5,7 +5,9 @@ Required properties: - compatible: Must contain one or more of the following: - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller. + - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. + - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. + - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index c306f55d335b..890526dbfc26 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -18,6 +18,7 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a77965" for the R8A77965 SoC. - "renesas,etheravb-r8a77970" for the R8A77970 SoC. - "renesas,etheravb-r8a77980" for the R8A77980 SoC. - "renesas,etheravb-r8a77995" for the R8A77995 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index ed5eb547afc8..64bc5c2a76da 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer configuration, drive strength and pullups. If one of these options is not set, its actual value will be unspecified. -This driver supports the generic pin multiplexing and configuration -bindings. For details on each properties, you can refer to -./pinctrl-bindings.txt. +Allwinner A1X Pin Controller supports the generic pin multiplexing and +configuration bindings. For details on each properties, you can refer to + ./pinctrl-bindings.txt. Required sub-node properties: - pins diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt index 8ff65fa632fd..c06c045126fc 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt @@ -21,7 +21,7 @@ Required properties: - interrupts : identifier to the device interrupt - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock names. -- clocks-names : +- clock-names : * "xtal" for external xtal clock identifier * "pclk" for the bus core clock, either the clk81 clock or the gate clock * "baud" for the source of the baudrate generator, can be either the xtal diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 2ae2fee7e023..b7e0e32b9ac6 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -24,7 +24,7 @@ Required properties: - Must contain two elements for the extended variant of the IP (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx", respectively the UART TX interrupt and the UART RX interrupt. A - corresponding interrupts-names property must be defined. + corresponding interrupt-names property must be defined. - For backward compatibility reasons, a single element interrupts property is also supported for the standard variant of the IP, containing only the UART sum interrupt. This form is deprecated diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index ad962f4ec3aa..106808b55b6d 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. + - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. + - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. @@ -41,6 +43,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART. + - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART. - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART. diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 1b596fd38dc4..b957acff57aa 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured): - samsung,exynos5433-tmu: 8 - samsung,exynos7-tmu: 8 -Following properties are mandatory (depending on SoC): -- samsung,tmu_gain: Gain value for internal TMU operation. -- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage -- samsung,tmu_noise_cancel_mode: Mode for noise cancellation -- samsung,tmu_efuse_value: Default level of temperature - it is needed when - in factory fusing produced wrong value -- samsung,tmu_min_efuse_value: Minimum temperature fused value -- samsung,tmu_max_efuse_value: Maximum temperature fused value -- samsung,tmu_first_point_trim: First point trimming value -- samsung,tmu_second_point_trim: Second point trimming value -- samsung,tmu_default_temp_offset: Default temperature offset -- samsung,tmu_cal_type: Callibration type - ** Optional properties: - vtmu-supply: This entry is optional and provides the regulator node supplying @@ -78,7 +65,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; vtmu-supply = <&tmu_regulator_node>; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 2): @@ -89,7 +76,7 @@ Example 2): interrupts = <0 58 0>; clocks = <&clock 21>; clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") @@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 184 0>; clocks = <&clock 318>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 185 0>; clocks = <&clock 318>, <&clock 319>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 215 0>; clocks = <&clock 319>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Note: For multi-instance tmu each instance should have an alias correctly diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 1719d47a5e2f..cc553f0952c5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to the different fan speeds possible. Cooling states are referred to by single unsigned integers, where larger numbers mean greater heat dissipation. The precise set of cooling states associated with a device -(as referred to by the cooling-min-level and cooling-max-level -properties) should be defined in a particular device's binding. +should be defined in a particular device's binding. For more examples of cooling devices, refer to the example sections below. Required properties: @@ -69,15 +68,6 @@ Required properties: See Cooling device maps section below for more details on how consumers refer to cooling devices. -Optional properties: -- cooling-min-level: An integer indicating the smallest - Type: unsigned cooling state accepted. Typically 0. - Size: one cell - -- cooling-max-level: An integer indicating the largest - Type: unsigned cooling state accepted. - Size: one cell - * Trip points The trip node is a node to describe a point in the temperature domain @@ -226,8 +216,6 @@ cpus { 396000 950000 198000 850000 >; - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; ... @@ -241,8 +229,6 @@ cpus { */ fan0: fan@48 { ... - cooling-min-level = <0>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt new file mode 100644 index 000000000000..ea22dfe485be --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -0,0 +1,21 @@ +Nuvoton NPCM7xx timer + +Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit +timer counters. + +Required properties: +- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. +- reg : Offset and length of the register set for the device. +- interrupts : Contain the timer interrupt with flags for + falling edge. +- clocks : phandle of timer reference clock (usually a 25 MHz clock). + +Example: + +timer@f0008000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf0008000 0x50>; + clocks = <&clk NPCM7XX_CLK_TIMER>; +}; + diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt index b4aa7ddb5b13..f82087b220f4 100644 --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt @@ -15,7 +15,7 @@ Required properties: - interrupts : Should be the clock event device interrupt. - clocks : The clocks provided by the SoC to drive the timer, must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: "igp" and "per". +- clock-names : Must include the following entries: "ipg" and "per". Example: tpm5: tpm@40260000 { diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index c4c00dff4b56..bd1dd316fb23 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -28,7 +28,10 @@ Required properties: - interrupts: one XHCI interrupt should be described here. Optional properties: - - clocks: reference to a clock + - clocks: reference to the clocks + - clock-names: mandatory if there is a second clock, in this case + the name must be "core" for the first clock and "reg" for the + second one - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index b5f978a4cac6..a38d8bfae19c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -182,6 +182,7 @@ karo Ka-Ro electronics GmbH keithkoep Keith & Koep GmbH keymile Keymile GmbH khadas Khadas +kiebackpeter Kieback & Peter GmbH kinetic Kinetic Technologies kingnovel Kingnovel Technology Co., Ltd. kosagi Sutajio Ko-Usagi PTE Ltd. diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index a4feb6dde8cd..725fb8d255c1 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -98,6 +98,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_remove_all() which will remove every single one in the correct order. +In addition, there is the option to register notifiers that get called on +overlay operations. See of_overlay_notifier_register/unregister and +enum of_overlay_notify_action for details. + +Note that a notifier callback is not supposed to store pointers to a device +tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the +respective node it received. + Overlay DTS Format ------------------ |
