diff options
Diffstat (limited to 'Documentation/devicetree')
40 files changed, 710 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 50daa0b3b032..63b139f9ae28 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -15,7 +15,7 @@ DT_TMP_SCHEMA := processed-schema.yaml extra-y += $(DT_TMP_SCHEMA) quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) + cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) DT_DOCS = $(shell \ cd $(srctree)/$(src) && \ diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt index 2ef86ae96df8..d19885b7c73f 100644 --- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt @@ -2,13 +2,14 @@ The Actions Semi Owl Clock Management Unit generates and supplies clock to various controllers within the SoC. The clock binding described here is -applicable to S900 and S700 SoC's. +applicable to S900, S700 and S500 SoC's. Required Properties: - compatible: should be one of the following, "actions,s900-cmu" "actions,s700-cmu" + "actions,s500-cmu" - reg: physical base address of the controller and length of memory mapped region. - clocks: Reference to the parent clocks ("hosc", "losc") @@ -19,8 +20,8 @@ Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in corresponding -dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be -used in device tree sources. +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or +actions,s500-cmu.h header and can be used in device tree sources. External clocks: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index 79511d7bb321..c41f0be5d438 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -10,6 +10,7 @@ Required Properties: - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" + - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" - clocks: list of clock phandle, one for each entry clock-names. - clock-names: should contain the following: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index a6871953bf04..5c8b105be4d6 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,7 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. + "amlogic,g12a-clkc" for G12A SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index 50d5897c9849..183c327a7d6b 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -50,6 +50,8 @@ Required Properties: IPs. - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. + - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM + which generates clocks for SSS (Security SubSystem) and SlimSSS IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -168,6 +170,12 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 + Input clocks for imem clock controller: + - oscclk + - aclk_imem_sssx_266 + - aclk_imem_266 + - aclk_imem_200 + Optional properties: - power-domains: a phandle to respective power domain node as described by generic PM domain bindings (see power/power_domain.txt for more @@ -469,6 +477,21 @@ Example 2: Examples of clock controller nodes are listed below. power-domains = <&pd_cam1>; }; + cmu_imem: clock-controller@11060000 { + compatible = "samsung,exynos5433-cmu-imem"; + reg = <0x11060000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_imem_sssx_266", + "aclk_imem_266", + "aclk_imem_200"; + clocks = <&xxti>, + <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_200>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt deleted file mode 100644 index 0641a663ad69..000000000000 --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Binding for simple fixed-rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-frequency : frequency of clock in Hz. Should be a single cell. - -Optional properties: -- clock-accuracy : accuracy of clock in ppb (parts per billion). - Should be a single cell. -- clock-output-names : From common clock binding. - -Example: - clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - clock-accuracy = <100>; - }; diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml new file mode 100644 index 000000000000..b657ecd0ef1c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed-rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + const: fixed-clock + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-accuracy: + description: accuracy of clock in ppb (parts per billion). + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clock-frequency + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-accuracy = <100>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt deleted file mode 100644 index 189467a7188a..000000000000 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -Binding for simple fixed factor rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-factor-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-div: fixed divider. -- clock-mult: fixed multiplier. -- clocks: parent clock. - -Optional properties: -- clock-output-names : From common clock binding. - -Some clocks that require special treatments are also handled by that -driver, with the compatibles: - - allwinner,sun4i-a10-pll3-2x-clk - -Example: - clock { - compatible = "fixed-factor-clock"; - clocks = <&parentclk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml new file mode 100644 index 000000000000..b567f8092f8c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed factor rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-pll3-2x-clk + - fixed-factor-clock + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-div: + description: Fixed divider + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + + clock-mult: + description: Fixed multiplier + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clocks + - "#clock-cells" + - clock-div + - clock-mult + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt new file mode 100644 index 000000000000..c359367fd1a9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt @@ -0,0 +1,24 @@ +Binding for simple memory mapped io fixed-rate clock sources. +The driver reads a clock frequency value from a single 32-bit memory mapped +I/O register and registers it as a fixed rate clock. + +It was designed for test systems, like FPGA, not for complete, finished SoCs. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "fixed-mmio-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- reg : Address and length of the clock value register set. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: +sysclock: sysclock@fd020004 { + #clock-cells = <0>; + compatible = "fixed-mmio-clock"; + reg = <0xfd020004 0x4>; +}; diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt new file mode 100644 index 000000000000..8e4ab9e619a1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt @@ -0,0 +1,29 @@ +* Clock bindings for NXP i.MX8M Mini + +Required properties: +- compatible: Should be "fsl,imx8mm-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "osc_32k" + - "osc_24m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; +}; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h +for the full list of i.MX8M Mini clock IDs. diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 87b4949e9bc8..944719bd586f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-msm8998", "qcom,rpmcc" "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index 209d931ef16c..b67f8caa212c 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -36,7 +36,6 @@ ssd1307: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; }; ssd1306: oled@3c { @@ -44,7 +43,6 @@ ssd1306: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; solomon,com-lrremap; solomon,com-invdir; solomon,com-offset = <32>; diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt index 6312fb00ce8d..eeb4e4d1771e 100644 --- a/Documentation/devicetree/bindings/dma/dma.txt +++ b/Documentation/devicetree/bindings/dma/dma.txt @@ -16,6 +16,9 @@ Optional properties: - dma-channels: Number of DMA channels supported by the controller. - dma-requests: Number of DMA request signals supported by the controller. +- dma-channel-mask: Bitmask of available DMA channels in ascending order + that are not reserved by firmware and are available to + the kernel. i.e. first channel corresponds to LSB. Example: @@ -29,6 +32,7 @@ Example: #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + dma-channel-mask = <0xfffe> }; * DMA router diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt new file mode 100644 index 000000000000..6a0ff9059e72 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt @@ -0,0 +1,57 @@ +NXP Layerscape SoC qDMA Controller +================================== + +This device follows the generic DMA bindings defined in dma/dma.txt. + +Required properties: + +- compatible: Must be one of + "fsl,ls1021a-qdma": for LS1021A Board + "fsl,ls1043a-qdma": for ls1043A Board + "fsl,ls1046a-qdma": for ls1046A Board +- reg: Should contain the register's base address and length. +- interrupts: Should contain a reference to the interrupt used by this + device. +- interrupt-names: Should contain interrupt names: + "qdma-queue0": the block0 interrupt + "qdma-queue1": the block1 interrupt + "qdma-queue2": the block2 interrupt + "qdma-queue3": the block3 interrupt + "qdma-error": the error interrupt +- fsl,dma-queues: Should contain number of queues supported. +- dma-channels: Number of DMA channels supported +- block-number: the virtual block number +- block-offset: the offset of different virtual block +- status-sizes: status queue size of per virtual block +- queue-sizes: command queue size of per virtual block, the size number + based on queues + +Optional properties: + +- dma-channels: Number of DMA channels supported by the controller. +- big-endian: If present registers and hardware scatter/gather descriptors + of the qDMA are implemented in big endian mode, otherwise in little + mode. + +Examples: + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt index 4945aeac4dc4..10a2f15b08a3 100644 --- a/Documentation/devicetree/bindings/dma/k3dma.txt +++ b/Documentation/devicetree/bindings/dma/k3dma.txt @@ -3,7 +3,9 @@ See dma.txt first Required properties: -- compatible: Should be "hisilicon,k3-dma-1.0" +- compatible: Must be one of +- "hisilicon,k3-dma-1.0" +- "hisilicon,hisi-pcm-asp-dma-1.0" - reg: Should contain DMA registers location and length. - interrupts: Should contain one interrupt shared by all channel - #dma-cells: see dma.txt, should be 1, para number diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index db757df7057d..0bedceed1963 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -23,8 +23,6 @@ Deprecated properties: Optional properties: -- is_private: The device channels should be marked as private and not for by the - general purpose DMA channel allocator. False if not passed. - multi-block: Multi block transfers supported by hardware. Array property with one cell per channel. 0: not supported, 1 (default): supported. - snps,dma-protection-control: AHB HPROT[3:1] protection setting. diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt index 7a10fea2e51b..adccea9941f1 100644 --- a/Documentation/devicetree/bindings/dma/sprd-dma.txt +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -31,7 +31,7 @@ DMA clients connected to the Spreadtrum DMA controller must use the format described in the dma.txt file, using a two-cell specifier for each channel. The two cells in order are: 1. A phandle pointing to the DMA controller. -2. The channel id. +2. The slave id. spi0: spi@70a00000{ ... diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index 174af2c45e77..93b6d961dd4f 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -37,10 +37,11 @@ Required properties: Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. -Optional properties: -- xlnx,include-sg: Tells configured for Scatter-mode in - the hardware. Optional properties for AXI DMA: +- xlnx,sg-length-width: Should be set to the width in bits of the length + register as configured in h/w. Takes values {8...26}. If the property + is missing or invalid then the default value 23 is used. This is the + maximum value that is supported by all IP versions. - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt index 0c252d9306da..ef2ae729718f 100644 --- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -1,13 +1,19 @@ Samsung tm2-touchkey Required properties: -- compatible: must be "cypress,tm2-touchkey" +- compatible: + * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board + * "cypress,midas-touchkey" - for the touchkey found on midas boards + * "cypress,aries-touchkey" - for the touchkey found on aries boards - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). - vcc-supply : internal regulator output. 1.8V - vdd-supply : power supply for IC 3.3V +Optional properties: +- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -21,5 +27,6 @@ Example: interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vcc-supply=<&ldo32_reg>; vdd-supply=<&ldo33_reg>; + linux,keycodes = <KEY_PHONE KEY_BACK>; }; }; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt new file mode 100644 index 000000000000..b2a76301e632 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt @@ -0,0 +1,25 @@ +Ilitek ILI210x/ILI251x touchscreen controller + +Required properties: +- compatible: + ilitek,ili210x for ILI210x + ilitek,ili251x for ILI251x + +- reg: The I2C address of the device + +- interrupts: The sink for the touchscreen's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + +Example: + + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpio4>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt new file mode 100644 index 000000000000..8dcf014ef2e5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/msm-vibrator.txt @@ -0,0 +1,36 @@ +* Device tree bindings for the Qualcomm MSM vibrator + +Required properties: + + - compatible: Should be one of + "qcom,msm8226-vibrator" + "qcom,msm8974-vibrator" + - reg: the base address and length of the IO memory for the registers. + - pinctrl-names: set to default. + - pinctrl-0: phandles pointing to pin configuration nodes. See + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + - clock-names: set to pwm + - clocks: phandle of the clock. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + - enable-gpios: GPIO that enables the vibrator. + +Optional properties: + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example from a LG Nexus 5 (hammerhead) phone: + +vibrator@fd8c3450 { + reg = <0xfd8c3450 0x400>; + compatible = "qcom,msm8974-vibrator"; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index da2dc5d6c98b..870b8c5cce9b 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -1,11 +1,12 @@ FocalTech EDT-FT5x06 Polytouch driver ===================================== -There are 3 variants of the chip for various touch panel sizes +There are 5 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" FT5506EEG 7" .. 8.9" +FT5726NEI 5.7” .. 11.6" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -19,6 +20,7 @@ Required properties: or: "edt,edt-ft5306" or: "edt,edt-ft5406" or: "edt,edt-ft5506" + or: "evervision,ev-ft5726" or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) @@ -42,6 +44,15 @@ Optional properties: - offset: allows setting the edge compensation in the range from 0 to 31. + + - offset-x: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + + - offset-y: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + - touchscreen-size-x : See touchscreen.txt - touchscreen-size-y : See touchscreen.txt - touchscreen-fuzz-x : See touchscreen.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index f7e95c52f3c7..8cf0b4d38a7e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - compatible : Should be "goodix,gt1151" + or "goodix,gt5688" or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" @@ -18,11 +19,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset - - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt index 64ad48b824a2..019373253b28 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt @@ -1,13 +1,17 @@ -* Sitronix st1232 touchscreen controller +* Sitronix st1232 or st1633 touchscreen controller Required properties: -- compatible: must be "sitronix,st1232" +- compatible: must contain one of + * "sitronix,st1232" + * "sitronix,st1633" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected Optional properties: - gpios: a phandle to the reset GPIO +For additional optional properties see: touchscreen.txt + Example: i2c@00000000 { diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt index 4886c4aa2906..0ebe6dd043c7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt @@ -1,10 +1,17 @@ * Semtech SX8654 I2C Touchscreen Controller Required properties: -- compatible: must be "semtech,sx8654" +- compatible: must be one of the following, depending on the model: + "semtech,sx8650" + "semtech,sx8654" + "semtech,sx8655" + "semtech,sx8656" - reg: i2c slave address - interrupts: touch controller interrupt +Optional properties: + - reset-gpios: GPIO specification for the NRST input + Example: sx8654@48 { @@ -12,4 +19,5 @@ Example: reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt new file mode 100644 index 000000000000..4438432bfe9b --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -0,0 +1,127 @@ +Xilinx IPI Mailbox Controller +======================================== + +The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage +messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI +agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ +ATF | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | +Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + + +Controller Device Node: +=========================== +Required properties: +-------------------- +IPI agent node: +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" +- interrupt-parent: Phandle for the interrupt controller +- interrupts: Interrupt information corresponding to the + interrupt-names property. +- xlnx,ipi-id: local Xilinx IPI agent ID +- #address-cells: number of address cells of internal IPI mailbox nodes +- #size-cells: number of size cells of internal IPI mailbox nodes + +Internal IPI mailbox node: +- reg: IPI buffers address ranges +- reg-names: Names of the reg resources. It should have: + * local_request_region + - IPI request msg buffer written by local and read + by remote + * local_response_region + - IPI response msg buffer written by local and read + by remote + * remote_request_region + - IPI request msg buffer written by remote and read + by local + * remote_response_region + - IPI response msg buffer written by remote and read + by local +- #mbox-cells: Shall be 1. It contains: + * tx(0) or rx(1) channel +- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is + connected to. + +Optional properties: +-------------------- +- method: The method of accessing the IPI agent registers. + Permitted values are: "smc" and "hvc". Default is + "smc". + +Client Device Node: +=========================== +Required properties: +-------------------- +- mboxes: Standard property to specify a mailbox + (See ./mailbox.txt) +- mbox-names: List of identifier strings for each mailbox + channel. + +Example: +=========================== + zynqmp_ipi { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff90400 { + reg = <0xff990400 0x20>, + <0xff990420 0x20>, + <0xff990080 0x20>, + <0xff9900a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + /* APU<->RPU1 IPI mailbox controller */ + ipi_mailbox_rpu1: mailbox@ff990440 { + reg = <0xff990440 0x20>, + <0xff990460 0x20>, + <0xff990280 0x20>, + <0xff9902a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <2>; + }; + }; + rpu0 { + ... + mboxes = <&ipi_mailbox_rpu0 0>, + <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + rpu1 { + ... + mboxes = <&ipi_mailbox_rpu1 0>, + <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 35694c0c376b..d66a5292b9d3 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -71,6 +71,10 @@ properties, described in binding documents: Documentation/devicetree/bindings/net/fixed-link.txt for details. +- local-mac-address : See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + Example The following example shows three switches on three MDIO busses, @@ -97,6 +101,7 @@ linked into one DSA cluster. port@1 { reg = <1>; label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; }; port@2 { diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index 1341012722aa..a90eef11dc46 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -14,8 +14,7 @@ Required properties: - clock-names: Should be "stmmaceth" for the host clock. Should be "mac-clk-tx" for the MAC TX clock. Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock and, - "syscfg-clk" for SYSCFG clock. + For MPU family need to add also "ethstp" for power mode clock - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. Should be "macirq" for the main MAC IRQ @@ -24,9 +23,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. +- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. Example: diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3e23fece99da..eb39f5051159 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -19,7 +19,7 @@ such as pull-up, multi drive, etc. Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" - or "atmel,sama5d3-pinctrl" + or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 11 - High OUTPUT (1 << 7): indicate this pin need to be configured as an output. OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) +SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. @@ -116,6 +117,19 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: configurations by referring to the phandle of that pin configuration node. 4. The gpio controller must be describe in the pinctrl simple-bus. +For each bank the required properties are: +- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or + "microchip,sam9x60-gpio" +- reg: physical base address and length of the controller's registers +- interrupts: interrupt outputs from the controller +- interrupt-controller: marks the device node as an interrupt controller +- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt + for more details. +- gpio-controller +- #gpio-cells: should be 2; the first cell is the GPIO number and the second + cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>. +- clocks: bank clock + Examples: pinctrl@fffff400 { @@ -125,6 +139,17 @@ pinctrl@fffff400 { compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; reg = <0xfffff400 0x600>; + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + atmel,mux-mask = < /* A B */ 0xffffffff 0xffc00c3b /* pioA */ diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt new file mode 100644 index 000000000000..6da01d619d33 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt @@ -0,0 +1,32 @@ +* Freescale IMX50 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx50-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx50 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HVE (1 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE (1 << 3) +PAD_CTL_DSE_LOW (0 << 1) +PAD_CTL_DSE_MED (1 << 1) +PAD_CTL_DSE_HIGH (2 << 1) +PAD_CTL_DSE_MAX (3 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx50-pinfunc.h in device tree source folder for all available +imx50 PIN_FUNC_ID. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt new file mode 100644 index 000000000000..524a16fca666 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale IMX8MM IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mm-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index c7c088d2dd50..38dc56a57760 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -58,11 +58,11 @@ group pwm3 - functions pwm, gpio group pmic1 - - pin 17 + - pin 7 - functions pmic, gpio group pmic0 - - pin 16 + - pin 6 - functions pmic, gpio group i2c2 @@ -112,19 +112,31 @@ group usb2_drvvbus1 - functions drvbus, gpio group sdio_sb - - pins 60-64 + - pins 60-65 - functions sdio, gpio group rgmii - - pins 42-55 + - pins 42-53 - functions mii, gpio group pcie1 - - pins 39-40 + - pins 39 + - functions pcie, gpio + +group pcie1_clkreq + - pins 40 - functions pcie, gpio +group pcie1_wakeup + - pins 41 + - functions pcie, gpio + +group smi + - pins 54-55 + - functions smi, gpio + group ptp - - pins 56-58 + - pins 56 - functions ptp, gpio group ptp_clk diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 82ead40311f6..a47dd990a8d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -23,11 +23,11 @@ The GPIO bank for the controller is represented as a sub-node and it acts as a GPIO controller. Required properties for sub-nodes are: - - reg: should contain address and size for mux, pull-enable, pull and - gpio register sets - - reg-names: an array of strings describing the "reg" entries. Must - contain "mux", "pull" and "gpio". "pull-enable" is optional and - when it is missing the "pull" registers are used instead + - reg: should contain a list of address and size, one tuple for each entry + in reg-names. + - reg-names: an array of strings describing the "reg" entries. + Must contain "mux" and "gpio". + May contain "pull", "pull-enable" and "ds" when appropriate. - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt index c8c831d7b0d1..591ecdd39c7b 100644 --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt @@ -5,6 +5,7 @@ Required properties: - "atmel,at91sam9rl-pwm" - "atmel,sama5d3-pwm" - "atmel,sama5d2-pwm" + - "microchip,sam9x60-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt index fa7849d67836..daedfef09bb6 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt @@ -5,6 +5,8 @@ Required properties: The SoC specific strings supported including: "hisilicon,hi3516cv300-pwm" "hisilicon,hi3519v100-pwm" + "hisilicon,hi3559v100-shub-pwm" + "hisilicon,hi3559v100-pwm - reg: physical base address and length of the controller's registers. - clocks: phandle and clock specifier of the PWM reference clock. - resets: phandle and reset specifier for the PWM controller reset. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt index a842a782b557..66af2c30944f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt @@ -35,7 +35,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. Value type: <stringlist> Definition: List of clock input name strings sorted in the same order as the clocks property. Definition must have - "xo", "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr", + "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep" and "qdsp6ss_core". @@ -100,13 +100,12 @@ ADSP, as it is found on SDM845 boards. clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_LPASS_SWAY_CLK>, - <&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>, <&lpasscc LPASS_QDSP6SS_XO_CLK>, <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>, <&lpasscc LPASS_QDSP6SS_CORE_CLK>; - clock-names = "xo", "sway_cbcr", "lpass_aon", + clock-names = "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core"; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt index 9c0cff3a5ed8..292dfda9770d 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -19,13 +19,30 @@ on the Qualcomm ADSP Hexagon core. - interrupts-extended: Usage: required Value type: <prop-encoded-array> - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: <stringlist> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the compatible + string: + qcom,msm8974-adsp-pil: + qcom,msm8996-adsp-pil: + qcom,msm8996-slpi-pil: + qcom,qcs404-adsp-pas: + qcom,qcs404-cdsp-pas: + qcom,sdm845-adsp-pas: + qcom,sdm845-cdsp-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,qcs404-wcss-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: <string> + Definition: must list the relative firmware image path for the + Hexagon Core. - clocks: Usage: required diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 9ff5b0309417..41ca5df5be5a 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -28,24 +28,51 @@ on the Qualcomm Hexagon core. - interrupts-extended: Usage: required Value type: <prop-encoded-array> - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: <stringlist> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the the compatible + string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,msm8996-mss-pil: + qcom,sdm845-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: <stringlist> + Definition: must list the relative firmware image paths for mba and + modem. They are used for booting and authenticating the + Hexagon core. - clocks: Usage: required Value type: <phandle> - Definition: reference to the iface, bus and mem clocks to be held on - behalf of the booting of the Hexagon core + Definition: reference to the clocks that match clock-names - clock-names: Usage: required Value type: <stringlist> - Definition: must be "iface", "bus", "mem" + Definition: The clocks needed depend on the compatible string: + qcom,ipq8074-wcss-pil: + no clock names required + qcom,q6v5-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "iface", "bus", "mem", "xo" + qcom,msm8996-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss" + qcom,sdm845-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required @@ -65,6 +92,19 @@ on the Qualcomm Hexagon core. must be "mss_restart", "pdc_reset" for the modem sub-system on SDM845 SoCs +For the compatible strings below the following supplies are required: + "qcom,q6v5-pil" + "qcom,msm8916-mss-pil", +- cx-supply: +- mx-supply: +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: + "qcom,msm8974-mss-pil" - cx-supply: - mss-supply: - mx-supply: @@ -74,6 +114,33 @@ on the Qualcomm Hexagon core. Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core +For the compatible string below the following supplies are required: + "qcom,msm8996-mss-pil" +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +- power-domains: + Usage: required + Value type: <phandle> + Definition: reference to power-domains that match power-domain-names + +- power-domain-names: + Usage: required + Value type: <stringlist> + Definition: The power-domains needed depend on the compatible string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + no power-domain names required + qcom,msm8996-mss-pil: + must be "cx", "mx" + qcom,sdm845-mss-pil: + must be "cx", "mx", "mss", "load_state" + - qcom,smem-states: Usage: required Value type: <phandle> diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt index ef2b97b72e08..9f365c1a3399 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -8,6 +8,7 @@ Required properties: - "renesas,r8a7743-wdt" (RZ/G1M) - "renesas,r8a7744-wdt" (RZ/G1N) - "renesas,r8a7745-wdt" (RZ/G1E) + - "renesas,r8a77470-wdt" (RZ/G1C) - "renesas,r8a774a1-wdt" (RZ/G2M) - "renesas,r8a774c0-wdt" (RZ/G2E) - "renesas,r8a7790-wdt" (R-Car H2) |
