diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
39 files changed, 695 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt new file mode 100644 index 000000000000..d38834c67dff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt @@ -0,0 +1,31 @@ +OP-TEE Device Tree Bindings + +OP-TEE is a piece of software using hardware features to provide a Trusted +Execution Environment. The security can be provided with ARM TrustZone, but +also by virtualization or a separate chip. + +We're using "linaro" as the first part of the compatible property for +the reference implementation maintained by Linaro. + +* OP-TEE based on ARM TrustZone required properties: + +- compatible : should contain "linaro,optee-tz" + +- method : The method of calling the OP-TEE Trusted OS. Permitted + values are: + + "smc" : SMC #0, with the register assignments specified + in drivers/tee/optee/optee_smc.h + + "hvc" : HVC #0, with the register assignments specified + in drivers/tee/optee/optee_smc.h + + + +Example: + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cb0054ac7121..cd977db7630c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt6797-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index f6a916686f4c..047b11ae5f45 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 1620ec2a5a3f..58d58e2006b8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 67dd2e473d25..70529e0b58e9 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index 9f2fe7860114..ec93ecbb9f3c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt6797-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index 2440f73450c3..d150104f928a 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 5bb2866a2b50..8a93be643647 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -5,7 +5,8 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: -- compatible: Should be: +- compatible: Should be one of: + - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt index 87e9c47a89a3..53d7e50ed875 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt @@ -6,18 +6,21 @@ from 3 to 12 output clocks. ==I2C device node== Required properties: -- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933". +- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933" , + "idt,5p49v5935". - reg: i2c device address, shall be 0x68 or 0x6a. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, - 5p49v5923: (required) either or both of XTAL or CLKIN reference clock. - - 5p49v5933: (optional) property not present (internal + - 5p49v5933 and + - 5p49v5935: (optional) property not present (internal Xtal used) or CLKIN reference clock. - clock-names: from common clock binding; clock input names, can be - 5p49v5923: (required) either or both of "xin", "clkin". - - 5p49v5933: (optional) property not present or "clkin". + - 5p49v5933 and + - 5p49v5935: (optional) property not present or "clkin". ==Mapping between clock specifier and physical pins== @@ -34,6 +37,13 @@ clock specifier, the following mapping applies: 1 -- OUT1 2 -- OUT4 +5P49V5935: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + 3 -- OUT3 + 4 -- OUT4 + ==Example== /* 25MHz reference crystal */ diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt index 4da126116cf0..161326a4f9c1 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt @@ -1,12 +1,12 @@ -* Rockchip RK1108 Clock and Reset Unit +* Rockchip RV1108 Clock and Reset Unit -The RK1108 clock controller generates and supplies clock to various +The RV1108 clock controller generates and supplies clock to various controllers within the SoC and also implements a reset controller for SoC peripherals. Required Properties: -- compatible: should be "rockchip,rk1108-cru" +- compatible: should be "rockchip,rv1108-cru" - reg: physical base address of the controller and length of memory mapped region. - #clock-cells: should be 1. @@ -19,7 +19,7 @@ Optional Properties: Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be +preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be used in device tree sources. Similar macros exist for the reset sources in these files. @@ -38,7 +38,7 @@ clock-output-names: Example: Clock controller node: cru: cru@20200000 { - compatible = "rockchip,rk1108-cru"; + compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; rockchip,grf = <&grf>; @@ -50,7 +50,7 @@ Example: UART controller node that consumes the clock generated by the clock controller: uart0: serial@10230000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; reg = <0x10230000 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index bae5668cf427..f465647a4dd2 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -7,9 +7,12 @@ Required properties : - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-h3-ccu" + - "allwinner,sun8i-h3-r-ccu" - "allwinner,sun8i-v3s-ccu" - "allwinner,sun9i-a80-ccu" - "allwinner,sun50i-a64-ccu" + - "allwinner,sun50i-a64-r-ccu" + - "allwinner,sun50i-h5-ccu" - reg: Must contain the registers base address and length - clocks: phandle to the oscillators feeding the CCU. Two are needed: @@ -19,7 +22,11 @@ Required properties : - #clock-cells : must contain 1 - #reset-cells : must contain 1 -Example: +For the PRCM CCUs on H3/A64, two more clocks are needed: +- "pll-periph": the SoC's peripheral PLL from the main CCU +- "iosc": the SoC's internal frequency oscillator + +Example for generic CCU: ccu: clock@01c20000 { compatible = "allwinner,sun8i-h3-ccu"; reg = <0x01c20000 0x400>; @@ -28,3 +35,13 @@ ccu: clock@01c20000 { #clock-cells = <1>; #reset-cells = <1>; }; + +Example for PRCM CCU: +r_ccu: clock@01f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e204c8e..e5a8b363d829 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus-mode: boolean to enable AUS mode (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage. diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 42c3bb2d53e8..01e331a5f3e7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -41,9 +41,9 @@ Required properties: Optional properties: In order to use the GPIO lines in PWM mode, some additional optional -properties are required. Only Armada 370 and XP support these properties. +properties are required. -- compatible: Must contain "marvell,armada-370-xp-gpio" +- compatible: Must contain "marvell,armada-370-gpio" - reg: an additional register set is needed, for the GPIO Blink Counter on/off registers. @@ -71,7 +71,7 @@ Example: }; gpio1: gpio@18140 { - compatible = "marvell,armada-370-xp-gpio"; + compatible = "marvell,armada-370-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; ngpios = <17>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 6db22103e2dd..025cf8c9324a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -36,7 +36,7 @@ Optional properties: control gpios - threshold: allows setting the "click"-threshold in the range - from 20 to 80. + from 0 to 80. - gain: allows setting the sensitivity in the range from 0 to 31. Note that lower values indicate higher diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt index 05485699d70e..9630ac0e4b56 100644 --- a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt @@ -16,6 +16,11 @@ Required properties: - reg: Base address of PMIC on Hi6220 SoC. - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). - pmic-gpios: The GPIO used by PMIC IRQ. +- #clock-cells: From common clock binding; shall be set to 0 + +Optional properties: +- clock-output-names: From common clock binding to override the + default output clock name Example: pmic: pmic@f8000000 { @@ -24,4 +29,5 @@ Example: interrupt-controller; #interrupt-cells = <2>; pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + #clock-cells = <0>; } diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt index bbd083f5600a..1db6e0057a63 100644 --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt @@ -31,7 +31,7 @@ Example: compatible = "st,stm32-timers"; reg = <0x40010000 0x400>; clocks = <&rcc 0 160>; - clock-names = "clk_int"; + clock-names = "int"; pwm { compatible = "st,stm32-pwm"; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index e25436861867..9029b45b8a22 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -18,6 +18,8 @@ Optional properties: "ext_clock" (External clock provided to the card). - post-power-on-delay-ms : Delay in ms after powering the card and de-asserting the reset-gpios (if any) +- power-off-delay-us : Delay in us after asserting the reset-gpios (if any) + during power off of the card. Example: diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 3e7ee99d3949..f6bee57e453a 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -1,4 +1,109 @@ -Atmel NAND flash +Atmel NAND flash controller bindings + +The NAND flash controller node should be defined under the EBI bus (see +Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt). +One or several NAND devices can be defined under this NAND controller. +The NAND controller might be connected to an ECC engine. + +* NAND controller bindings: + +Required properties: +- compatible: should be one of the following + "atmel,at91rm9200-nand-controller" + "atmel,at91sam9260-nand-controller" + "atmel,at91sam9261-nand-controller" + "atmel,at91sam9g45-nand-controller" + "atmel,sama5d3-nand-controller" +- ranges: empty ranges property to forward EBI ranges definitions. +- #address-cells: should be set to 2. +- #size-cells: should be set to 1. +- atmel,nfc-io: phandle to the NFC IO block. Only required for sama5d3 + controllers. +- atmel,nfc-sram: phandle to the NFC SRAM block. Only required for sama5d3 + controllers. + +Optional properties: +- ecc-engine: phandle to the PMECC block. Only meaningful if the SoC embeds + a PMECC engine. + +* NAND device/chip bindings: + +Required properties: +- reg: describes the CS lines assigned to the NAND device. If the NAND device + exposes multiple CS lines (multi-dies chips), your reg property will + contain X tuples of 3 entries. + 1st entry: the CS line this NAND chip is connected to + 2nd entry: the base offset of the memory region assigned to this + device (always 0) + 3rd entry: the memory region size (always 0x800000) + +Optional properties: +- rb-gpios: the GPIO(s) used to check the Ready/Busy status of the NAND. +- cs-gpios: the GPIO(s) used to control the CS line. +- det-gpios: the GPIO used to detect if a Smartmedia Card is present. +- atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful + on sama5 SoCs. + +All generic properties described in +Documentation/devicetree/bindings/mtd/{common,nand}.txt also apply to the NAND +device node, and NAND partitions should be defined under the NAND node as +described in Documentation/devicetree/bindings/mtd/partition.txt. + +* ECC engine (PMECC) bindings: + +Required properties: +- compatible: should be one of the following + "atmel,at91sam9g45-pmecc" + "atmel,sama5d4-pmecc" + "atmel,sama5d2-pmecc" +- reg: should contain 2 register ranges. The first one is pointing to the PMECC + block, and the second one to the PMECC_ERRLOC block. + +Example: + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffc070 0x490>, + <0xffffc500 0x100>; + }; + + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x40000000 0x10000000 + 0x2 0x0 0x50000000 0x10000000 + 0x3 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + nand@3 { + reg = <0x3 0x0 0x800000>; + atmel,rb = <0>; + + /* + * Put generic NAND/MTD properties and + * subnodes here. + */ + }; + }; + }; + +----------------------------------------------------------------------- + +Deprecated bindings (should not be used in new device trees): Required properties: - compatible: The possible values are: diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index b04d03a1d499..e593bbeb2115 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -1,11 +1,11 @@ * Denali NAND controller Required properties: - - compatible : should be "denali,denali-nand-dt" + - compatible : should be one of the following: + "altr,socfpga-denali-nand" - for Altera SOCFPGA - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. - - dm-mask : DMA bit mask The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. @@ -15,9 +15,8 @@ Examples: nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; - dma-mask = <0xffffffff>; }; diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt index af8915b41ccf..486a17d533d7 100644 --- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt @@ -12,7 +12,7 @@ Required properties: - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. - gpios : Specifies the GPIO pins to control the NAND device. The order of - GPIO references is: RDY, nCE, ALE, CLE, and an optional nWP. + GPIO references is: RDY, nCE, ALE, CLE, and nWP. nCE and nWP are optional. Optional properties: - bank-width : Width (in bytes) of the device. If not present, the width @@ -36,7 +36,7 @@ gpio-nand@1,0 { #address-cells = <1>; #size-cells = <1>; gpios = <&banka 1 0>, /* RDY */ - <&banka 2 0>, /* nCE */ + <0>, /* nCE */ <&banka 3 0>, /* ALE */ <&banka 4 0>, /* CLE */ <0>; /* nWP */ diff --git a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt new file mode 100644 index 000000000000..ddd18c135148 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt @@ -0,0 +1,43 @@ +* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI) + +Required properties: +- compatible: should be "st,stm32f469-qspi" +- reg: the first contains the register location and length. + the second contains the memory mapping address and length +- reg-names: should contain the reg names "qspi" "qspi_mm" +- interrupts: should contain the interrupt for the device +- clocks: the phandle of the clock needed by the QSPI controller +- A pinctrl must be defined to set pins in mode of operation for QSPI transfer + +Optional properties: +- resets: must contain the phandle to the reset controller. + +A spi flash must be a child of the nor_flash node and could have some +properties. Also see jedec,spi-nor.txt. + +Required properties: +- reg: chip-Select number (QSPI controller may connect 2 nor flashes) +- spi-max-frequency: max frequency of spi bus + +Optional property: +- spi-rx-bus-width: see ../spi/spi-bus.txt for the description + +Example: + +qspi: spi@a0001000 { + compatible = "st,stm32f469-qspi"; + reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + interrupts = <91>; + resets = <&rcc STM32F4_AHB3_RESET(QSPI)>; + clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + + flash@0 { + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index d6c6e41648d4..8ec2ca21adeb 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -34,7 +34,7 @@ Required properties: "brcm,bcm6328-switch" "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 7ef9dbb08957..1d4d0f49c9d0 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -26,6 +26,10 @@ Optional properties: - interrupt-controller : Indicates the switch is itself an interrupt controller. This is used for the PHY interrupts. #interrupt-cells = <2> : Controller uses two cells, number and flag +- eeprom-length : Set to the length of an EEPROM connected to the + switch. Must be set if the switch can not detect + the presence and/or size of a connected EEPROM, + otherwise optional. - mdio : Container of PHY and devices on the switches MDIO bus. - mdio? : Container of PHYs and devices on the external MDIO diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index a1e3693cca16..6f55bdd52f8a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,10 @@ Optional properties: - phy-reset-active-high : If present then the reset sequence using the GPIO specified in the "phy-reset-gpios" property is reversed (H=reset state, L=operation state). +- phy-reset-post-delay : Post reset delay in milliseconds. If present then + a delay of phy-reset-post-delay milliseconds will be observed after the + phy-reset-gpios has been toggled. Can be omitted thus no delay is + observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. - phy-supply : regulator that powers the Ethernet PHY. - phy-handle : phandle to the PHY device connected to this device. - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt index 16c3a9501f5d..acfafc8e143c 100644 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ b/Documentation/devicetree/bindings/net/smsc911x.txt @@ -27,6 +27,7 @@ Optional properties: of the device. On many systems this is wired high so the device goes out of reset at power-on, but if it is under program control, this optional GPIO can wake up in response to it. +- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies Examples: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 71a3c134af1b..f01d154090da 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -247,7 +247,6 @@ bias-bus-hold - latch weakly bias-pull-up - pull up the pin bias-pull-down - pull down the pin bias-pull-pin-default - use pin-default pull state -bi-directional - pin supports simultaneous input/output operations drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source @@ -260,7 +259,6 @@ input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode -output-enable - enable output on pin regardless of output value output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 940707d095cc..14bd9e945ff6 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -81,7 +81,7 @@ Example 3: child: power-controller@12341000 { compatible = "foo,power-controller"; reg = <0x12341000 0x1000>; - power-domains = <&parent 0>; + power-domains = <&parent>; #power-domain-cells = <0>; domain-idle-states = <&DOMAIN_PWR_DN>; }; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt new file mode 100644 index 000000000000..c24886676a60 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt @@ -0,0 +1,20 @@ +AXP20x and AXP22x battery power supply + +Required Properties: + - compatible, one of: + "x-powers,axp209-battery-power-supply" + "x-powers,axp221-battery-power-supply" + +This node is a subnode of the axp20x/axp22x PMIC. + +The AXP20X and AXP22X can read the battery voltage, charge and discharge +currents of the battery by reading ADC channels from the AXP20X/AXP22X +ADC. + +Example: + +&axp209 { + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp209-battery-power-supply"; + } +}; diff --git a/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt new file mode 100644 index 000000000000..5af426e13334 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt @@ -0,0 +1,248 @@ +*** NOTE *** +This document is copied from OPAL firmware +(skiboot/doc/device-tree/ibm,powerpc-cpu-features/binding.txt) + +There is more complete overview and documentation of features in that +source tree. All patches and modifications should go there. +************ + +ibm,powerpc-cpu-features binding +================================ + +This device tree binding describes CPU features available to software, with +enablement, privilege, and compatibility metadata. + +More general description of design and implementation of this binding is +found in design.txt, which also points to documentation of specific features. + + +/cpus/ibm,powerpc-cpu-features node binding +------------------------------------------- + +Node: ibm,powerpc-cpu-features + +Description: Container of CPU feature nodes. + +The node name must be "ibm,powerpc-cpu-features". + +It is implemented as a child of the node "/cpus", but this must not be +assumed by parsers. + +The node is optional but should be provided by new OPAL firmware. + +Properties: + +- compatible + Usage: required + Value type: string + Definition: "ibm,powerpc-cpu-features" + + This compatibility refers to backwards compatibility of the overall + design with parsers that behave according to these guidelines. This can + be extended in a backward compatible manner which would not warrant a + revision of the compatible property. + +- isa + Usage: required + Value type: <u32> + Definition: + + isa that the CPU is currently running in. This provides instruction set + compatibility, less the individual feature nodes. For example, an ISA v3.0 + implementation that lacks the "transactional-memory" cpufeature node + should not use transactional memory facilities. + + Value corresponds to the "Power ISA Version" multiplied by 1000. + For example, <3000> corresponds to Version 3.0, <2070> to Version 2.07. + The minor digit is available for revisions. + +- display-name + Usage: optional + Value type: string + Definition: + + A human readable name for the CPU. + +/cpus/ibm,powerpc-cpu-features/example-feature node bindings +---------------------------------------------------------------- + +Each child node of cpu-features represents a CPU feature / capability. + +Node: A string describing an architected CPU feature, e.g., "floating-point". + +Description: A feature or capability supported by the CPUs. + +The name of the node is a human readable string that forms the interface +used to describe features to software. Features are currently documented +in the code where they are implemented in skiboot/core/cpufeatures.c + +Presence of the node indicates the feature is available. + +Properties: + +- isa + Usage: required + Value type: <u32> + Definition: + + First level of the Power ISA that the feature appears in. + Software should filter out features when constraining the + environment to a particular ISA version. + + Value is defined similarly to /cpus/features/isa + +- usable-privilege + Usage: required + Value type: <u32> bit mask + Definition: + Bit numbers are LSB0 + bit 0 - PR (problem state / user mode) + bit 1 - OS (privileged state) + bit 2 - HV (hypervisor state) + All other bits reserved and should be zero. + + This property describes the privilege levels and/or software components + that can use the feature. + + If bit 0 is set, then the hwcap-bit-nr property will exist. + + +- hv-support + Usage: optional + Value type: <u32> bit mask + Definition: + Bit numbers are LSB0 + bit 0 - HFSCR + All other bits reserved and should be zero. + + This property describes the HV privilege support required to enable the + feature to lesser privilege levels. If the property does not exist then no + support is required. + + If no bits are set, the hypervisor must have explicit/custom support for + this feature. + + If the HFSCR bit is set, then the hfscr-bit-nr property will exist and + the feature may be enabled by setting this bit in the HFSCR register. + + +- os-support + Usage: optional + Value type: <u32> bit mask + Definition: + Bit numbers are LSB0 + bit 0 - FSCR + All other bits reserved and should be zero. + + This property describes the OS privilege support required to enable the + feature to lesser privilege levels. If the property does not exist then no + support is required. + + If no bits are set, the operating system must have explicit/custom support + for this feature. + + If the FSCR bit is set, then the fscr-bit-nr property will exist and + the feature may be enabled by setting this bit in the FSCR register. + + +- hfscr-bit-nr + Usage: optional + Value type: <u32> + Definition: HFSCR bit position (LSB0) + + This property exists when the hv-support property HFSCR bit is set. This + property describes the bit number in the HFSCR register that the + hypervisor must set in order to enable this feature. + + This property also exists if an HFSCR bit corresponds with this feature. + This makes CPU feature parsing slightly simpler. + + +- fscr-bit-nr + Usage: optional + Value type: <u32> + Definition: FSCR bit position (LSB0) + + This property exists when the os-support property FSCR bit is set. This + property describes the bit number in the FSCR register that the + operating system must set in order to enable this feature. + + This property also exists if an FSCR bit corresponds with this feature. + This makes CPU feature parsing slightly simpler. + + +- hwcap-bit-nr + Usage: optional + Value type: <u32> + Definition: Linux ELF AUX vector bit position (LSB0) + + This property may exist when the usable-privilege property value has PR bit set. + This property describes the bit number that should be set in the ELF AUX + hardware capability vectors in order to advertise this feature to userspace. + Bits 0-31 correspond to bits 0-31 in AT_HWCAP vector. Bits 32-63 correspond + to 0-31 in AT_HWCAP2 vector, and so on. Missing AT_HWCAPx vectors implies + that the feature is not enabled or can not be advertised. Operating systems + may provide a number of unassigned hardware capability bits to allow for new + features to be advertised. + + Some properties representing features created before this binding are + advertised to userspace without a one-to-one hwcap bit number may not specify + this bit. Operating system will handle those bits specifically. All new + features usable by userspace will have a hwcap-bit-nr property. + + +- dependencies + Usage: optional + Value type: <prop-encoded-array> + Definition: + + If this property exists then it is a list of phandles to cpu feature + nodes that must be enabled for this feature to be enabled. + + +Example +------- + + /cpus/ibm,powerpc-cpu-features { + compatible = "ibm,powerpc-cpu-features"; + + isa = <3020>; + + darn { + isa = <3000>; + usable-privilege = <1 | 2 | 4>; + hwcap-bit-nr = <xx>; + }; + + scv { + isa = <3000>; + usable-privilege = <1 | 2>; + os-support = <0>; + hwcap-bit-nr = <xx>; + }; + + stop { + isa = <3000>; + usable-privilege = <2 | 4>; + hv-support = <0>; + os-support = <0>; + }; + + vsx2 (hypothetical) { + isa = <3010>; + usable-privilege = <1 | 2 | 4>; + hv-support = <0>; + os-support = <0>; + hwcap-bit-nr = <xx>; + }; + + vsx2-newinsns { + isa = <3020>; + usable-privilege = <1 | 2 | 4>; + os-support = <1>; + fscr-bit-nr = <xx>; + hwcap-bit-nr = <xx>; + dependencies = <&vsx2>; + }; + + }; diff --git a/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt new file mode 100644 index 000000000000..45750ff3112d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt @@ -0,0 +1,18 @@ +Motorola CPCAP PMIC RTC +----------------------- + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +Requires node properties: +- compatible: should contain "motorola,cpcap-rtc" +- interrupts: An interrupt specifier for alarm and 1 Hz irq + +Example: + +&cpcap { + cpcap_rtc: rtc { + compatible = "motorola,cpcap-rtc"; + interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-sh.txt b/Documentation/devicetree/bindings/rtc/rtc-sh.txt new file mode 100644 index 000000000000..7676c7d28874 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-sh.txt @@ -0,0 +1,28 @@ +* Real Time Clock for Renesas SH and ARM SoCs + +Required properties: +- compatible: Should be "renesas,r7s72100-rtc" and "renesas,sh-rtc" as a + fallback. +- reg: physical base address and length of memory mapped region. +- interrupts: 3 interrupts for alarm, period, and carry. +- interrupt-names: The interrupts should be labeled as "alarm", "period", and + "carry". +- clocks: The functional clock source for the RTC controller must be listed + first (if exists). Additionally, potential clock counting sources are to be + listed. +- clock-names: The functional clock must be labeled as "fck". Other clocks + may be named in accordance to the SoC hardware manuals. + + +Example: +rtc: rtc@fcff1000 { + compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc"; + reg = <0xfcff1000 0x2e>; + interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING + GIC_SPI 277 IRQ_TYPE_EDGE_RISING + GIC_SPI 278 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "period", "carry"; + clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>, + <&rtc_x3_clk>, <&extal_clk>; + clock-names = "fck", "rtc_x1", "rtc_x3", "extal"; +}; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt index 349f79fd7076..626e1afa64a6 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt @@ -13,8 +13,17 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. +Optional properties: +- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C + on CPM1), this item tells which ports have an associated interrupt (ports are + listed in the same order as in PCINT register) +- interrupts : This property provides the list of interrupt for each GPIO having + one as described by the fsl,cpm1-gpio-irq-mask property. There should be as + many interrupts as number of ones in the mask property. The first interrupt in + the list corresponds to the most significant bit of the mask. +- interrupt-parent : Parent for the above interrupt property. -Example of three SOC GPIO banks defined as gpio-controller nodes: +Example of four SOC GPIO banks defined as gpio-controller nodes: CPM1_PIO_A: gpio-controller@950 { #gpio-cells = <2>; @@ -30,6 +39,16 @@ Example of three SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; + CPM1_PIO_C: gpio-controller@960 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-c"; + reg = <0x960 0x10>; + fsl,cpm1-gpio-irq-mask = <0x0fff>; + interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; + interrupt-parent = <&CPM_PIC>; + gpio-controller; + }; + CPM1_PIO_E: gpio-controller@ac8 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-e"; diff --git a/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt b/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt deleted file mode 100644 index c59e27c632c1..000000000000 --- a/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt +++ /dev/null @@ -1,31 +0,0 @@ -Hi6220 SoC ION -=================================================================== -Required properties: -- compatible : "hisilicon,hi6220-ion" -- list of the ION heaps - - heap name : maybe heap_sys_user@0 - - heap id : id should be unique in the system. - - heap base : base ddr address of the heap,0 means that - it is dynamic. - - heap size : memory size and 0 means it is dynamic. - - heap type : the heap type of the heap, please also - see the define in ion.h(drivers/staging/android/uapi/ion.h) -------------------------------------------------------------------- -Example: - hi6220-ion { - compatible = "hisilicon,hi6220-ion"; - heap_sys_user@0 { - heap-name = "sys_user"; - heap-id = <0x0>; - heap-base = <0x0>; - heap-size = <0x0>; - heap-type = "ion_system"; - }; - heap_sys_contig@0 { - heap-name = "sys_contig"; - heap-id = <0x1>; - heap-base = <0x0>; - heap-size = <0x0>; - heap-type = "ion_system_contig"; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d2b2c5..da8c5b73ad10 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -3,15 +3,39 @@ Binding for Thermal Sensor driver for BCM2835 SoCs. Required parameters: ------------------- -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. +#thermal-sensor-cells: should be 0 (see thermal.txt) Example: +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + coefficients = <(-538) 407000>; + + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal new file mode 100644 index 000000000000..68e047170039 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal @@ -0,0 +1,37 @@ +* Broadcom Northstar Thermal + +This binding describes thermal sensor that is part of Northstar's DMU (Device +Management Unit). + +Required properties: +- compatible : Must be "brcm,ns-thermal" +- reg : iomem address range of PVTMON registers +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; +}; + +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt new file mode 100644 index 000000000000..e241bb5a5584 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt @@ -0,0 +1,36 @@ +* Dialog DA9062/61 TJUNC Thermal Module + +This module is part of the DA9061/DA9062. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + +Junction temperature thermal module uses an interrupt signal to identify +high THERMAL_TRIP_HOT temperatures for the PMIC device. + +Required properties: + +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-thermal", "dlg,da9062-thermal" + "dlg,da9062-thermal" + +Optional properties: + +- polling-delay-passive : Specify the polling period, measured in + milliseconds, between thermal zone device update checks. + +Example: DA9062 + + pmic0: da9062@58 { + thermal { + compatible = "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 onkey driver + + pmic0: da9061@58 { + thermal { + compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index ad10fbe61562..3e0a34c88e07 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -160,6 +160,7 @@ sii,s35390a 2-wire CMOS real-time clock silabs,si7020 Relative Humidity and Temperature Sensors skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st,24c256 i2c serial eeprom (24cxx) +st,m41t0 Serial real-time clock (RTC) st,m41t00 Serial real-time clock (RTC) st,m41t62 Serial real-time clock (RTC) with alarm st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 00bea038639e..fcf199b64d3d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -10,6 +10,7 @@ Required properties: - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; + - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs; - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f9fe94535b46..c03d20140366 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -173,6 +173,7 @@ lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation licheepi Lichee Pi +linaro Linaro Limited linux Linux-specific binding lltc Linear Technology Corporation lsi LSI Corp. (LSI Logic) @@ -196,6 +197,7 @@ minix MINIX Technology Ltd. miramems MiraMEMS Sensing Technology Co., Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. +motorola Motorola, Inc. moxa Moxa mpl MPL AG mqmaker mqmaker Inc. |
