diff options
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog')
4 files changed, 83 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt new file mode 100644 index 000000000000..2b86a00e351d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt @@ -0,0 +1,15 @@ +Broadcom Kona Family Watchdog Timer +----------------------------------- + +This watchdog timer is used in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 + +Required properties: + - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + - reg: memory address & range + +Example: + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt b/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt new file mode 100644 index 000000000000..a882967e17d4 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt @@ -0,0 +1,25 @@ +Conexant Digicolor SoCs Watchdog timer + +The watchdog functionality in Conexant Digicolor SoCs relies on the so called +"Agent Communication" block. This block includes the eight programmable system +timer counters. The first timer (called "Timer A") is the only one that can be +used as watchdog. + +Required properties: + +- compatible : Should be "cnxt,cx92755-wdt" +- reg : Specifies base physical address and size of the registers +- clocks : phandle; specifies the clock that drives the timer + +Optional properties: + +- timeout-sec : Contains the watchdog timeout in seconds + +Example: + + watchdog@f0000fc0 { + compatible = "cnxt,cx92755-wdt"; + reg = <0xf0000fc0 0x8>; + clocks = <&main_clk>; + timeout-sec = <15>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt index c227970671ea..1fa20e453a2d 100644 --- a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt @@ -1,10 +1,11 @@ TI Watchdog Timer (WDT) Controller for OMAP Required properties: -compatible: -- "ti,omap3-wdt" for OMAP3 -- "ti,omap4-wdt" for OMAP4 -- ti,hwmods: Name of the hwmod associated to the WDT +- compatible : "ti,omap3-wdt" for OMAP3 or "ti,omap4-wdt" for OMAP4 +- ti,hwmods : Name of the hwmod associated to the WDT + +Optional properties: +- timeout-sec : default watchdog timeout in seconds Examples: diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt new file mode 100644 index 000000000000..388c88a01222 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt @@ -0,0 +1,38 @@ +STMicroelectronics Low Power Controller (LPC) - Watchdog +======================================================== + +LPC currently supports Watchdog OR Real Time Clock functionality. + +[See: ../rtc/rtc-st-lpc.txt for RTC options] + +Required properties + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or + ST_LPC_MODE_WDT [1]. One (and only one) mode must be + selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <120>; + st,lpc-mode = <ST_LPC_MODE_WDT>; + st,warm-reset; + }; |
