diff options
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers')
-rw-r--r-- | Documentation/devicetree/bindings/memory-controllers/ti/emif.txt | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 621b41c79faa..44d71469c914 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -3,7 +3,9 @@ EMIF - External Memory Interface - is an SDRAM controller used in TI SoCs. EMIF supports, based on the IP revision, one or more of DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance -of the EMIF IP and memory parts attached to it. +of the EMIF IP and memory parts attached to it. Certain revisions +of the EMIF controller also contain optional ECC support, which +corrects one bit errors and detects two bit errors. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> @@ -11,6 +13,8 @@ Required properties: compatible should be one of the following: "ti,emif-am3352" "ti,emif-am4372" + "ti,emif-dra7xx" + "ti,emif-keystone" - phy-type : <u32> indicating the DDR phy type. Following are the allowed values @@ -22,6 +26,7 @@ Required properties: - ti,hwmods : For TI hwmods processing and omap device creation the value shall be "emif<n>" where <n> is the number of the EMIF instance with base 1. +- interrupts : interrupt used by the controller Required only for "ti,emif-am3352" and "ti,emif-am4372": - sram : Phandles for generic sram driver nodes, @@ -71,3 +76,9 @@ emif: emif@4c000000 { sram = <&pm_sram_code &pm_sram_data>; }; + +emif1: emif@4c000000 { + compatible = "ti,emif-dra7xx"; + reg = <0x4c000000 0x200>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; +}; |