1 files changed, 51 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
new file mode 100644
index 000000000000..965cfa42e025
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
@@ -0,0 +1,51 @@
+* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+The Low-Power Clock Gate (LPCG) modules contain a local programming
+model to control the clock gates for the peripherals. An LPCG module
+is used to locally gate the clocks for the associated peripheral.
+
+Note:
+This level of clock gating is provided after the clocks are generated
+by the SCU resources and clock controls. Thus even if the clock is
+enabled by these control bits, it might still not be running based
+on the base resource.
+
+Required properties:
+- compatible:	Should be one of:
+		  "fsl,imx8qxp-lpcg-adma",
+		  "fsl,imx8qxp-lpcg-conn",
+		  "fsl,imx8qxp-lpcg-dc",
+		  "fsl,imx8qxp-lpcg-dsp",
+		  "fsl,imx8qxp-lpcg-gpu",
+		  "fsl,imx8qxp-lpcg-hsio",
+		  "fsl,imx8qxp-lpcg-img",
+		  "fsl,imx8qxp-lpcg-lsio",
+		  "fsl,imx8qxp-lpcg-vpu"
+- reg:		Address and length of the register set
+- #clock-cells:	Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Examples:
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+
+conn_lpcg: clock-controller@5b200000 {
+	compatible = "fsl,imx8qxp-lpcg-conn";
+	reg = <0x5b200000 0xb0000>;
+	#clock-cells = <1>;
+};
+
+usdhc1: mmc@5b010000 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+	reg = <0x5b010000 0x10000>;
+	clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
+		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
+		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
+	clock-names = "ipg", "per", "ahb";
+};