diff options
Diffstat (limited to 'Documentation/ABI/testing')
| -rw-r--r-- | Documentation/ABI/testing/ima_policy | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 | 4 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-thunderbolt | 33 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb | 10 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-mei | 9 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-rtc | 16 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-usb_role | 21 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-fsi-master-gpio | 10 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-hid-logitech-hidpp | 19 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-hid-ntrig | 70 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-ufs | 885 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-fs-f2fs | 11 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-kernel-irq | 7 |
14 files changed, 1087 insertions, 12 deletions
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 2028f2d093b2..b8465e00ba5f 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -26,7 +26,7 @@ Description: [obj_user=] [obj_role=] [obj_type=]] option: [[appraise_type=]] [permit_directio] - base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] + base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x index c0c1ea924535..d512f865600e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x +++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x @@ -1,7 +1,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw Date: September 2015 KernelVersion: 4.3 -Contact: Matt Ranostay <mranostay@gmail.com> +Contact: Matt Ranostay <matt.ranostay@konsulko.com> Description: Get the raw calibration VOC value from the sensor. This value has little application outside of calibration. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 147d4e8a1403..9a17ab5036a4 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -1,7 +1,7 @@ What /sys/bus/iio/devices/iio:deviceX/in_proximity_input Date: March 2014 KernelVersion: 3.15 -Contact: Matt Ranostay <mranostay@gmail.com> +Contact: Matt Ranostay <matt.ranostay@konsulko.com> Description: Get the current distance in meters of storm (1km steps) 1000-40000 = distance in meters @@ -9,7 +9,7 @@ Description: What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity Date: March 2014 KernelVersion: 3.15 -Contact: Matt Ranostay <mranostay@gmail.com> +Contact: Matt Ranostay <matt.ranostay@konsulko.com> Description: Show or set the gain boost of the amp, from 0-31 range. 18 = indoors (default) diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 93798c02e28b..151584a1f950 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -1,3 +1,26 @@ +What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl +Date: Jun 2018 +KernelVersion: 4.17 +Contact: thunderbolt-software@lists.01.org +Description: Holds a comma separated list of device unique_ids that + are allowed to be connected automatically during system + startup (e.g boot devices). The list always contains + maximum supported number of unique_ids where unused + entries are empty. This allows the userspace software + to determine how many entries the controller supports. + If there are multiple controllers, each controller has + its own ACL list and size may be different between the + controllers. + + System BIOS may have an option "Preboot ACL" or similar + that needs to be selected before this list is taken into + consideration. + + Software always updates a full list in each write. + + If a device is authorized automatically during boot its + boot attribute is set to 1. + What: /sys/bus/thunderbolt/devices/.../domainX/security Date: Sep 2017 KernelVersion: 4.13 @@ -12,6 +35,9 @@ Description: This attribute holds current Thunderbolt security level minimum. User needs to authorize each device. dponly: Automatically tunnel Display port (and USB). No PCIe tunnels are created. + usbonly: Automatically tunnel USB controller of the + connected Thunderbolt dock (and Display Port). All + PCIe links downstream of the dock are removed. What: /sys/bus/thunderbolt/devices/.../authorized Date: Sep 2017 @@ -38,6 +64,13 @@ Description: This attribute is used to authorize Thunderbolt devices the device did not contain a key at all, and EKEYREJECTED if the challenge response did not match. +What: /sys/bus/thunderbolt/devices/.../boot +Date: Jun 2018 +KernelVersion: 4.17 +Contact: thunderbolt-software@lists.01.org +Description: This attribute contains 1 if Thunderbolt device was already + authorized on boot and 0 otherwise. + What: /sys/bus/thunderbolt/devices/.../key Date: Sep 2017 KernelVersion: 4.13 diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 0bd731cbb50c..c702c78f24d8 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -189,6 +189,16 @@ Description: The file will read "hotplug", "wired" and "not used" if the information is available, and "unknown" otherwise. +What: /sys/bus/usb/devices/.../(hub interface)/portX/over_current_count +Date: February 2018 +Contact: Richard Leitner <richard.leitner@skidata.com> +Description: + Most hubs are able to detect over-current situations on their + ports and report them to the kernel. This attribute is to expose + the number of over-current situation occurred on a specific port + to user space. This file will contain an unsigned 32 bit value + which wraps to 0 after its maximum is reached. + What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit Date: November 2015 Contact: Lu Baolu <baolu.lu@linux.intel.com> diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei index 5096a82f4cde..81ff6abf9673 100644 --- a/Documentation/ABI/testing/sysfs-class-mei +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -45,3 +45,12 @@ Contact: Tomas Winkler <tomas.winkler@intel.com> Description: Display the driver HBM protocol version. The HBM protocol version supported by the driver. + +What: /sys/class/mei/meiN/tx_queue_limit +Date: Jan 2018 +KernelVersion: 4.16 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Configure tx queue limit + + Set maximal number of pending writes + per opened session. diff --git a/Documentation/ABI/testing/sysfs-class-rtc b/Documentation/ABI/testing/sysfs-class-rtc index cf60412882f0..95984289a4ee 100644 --- a/Documentation/ABI/testing/sysfs-class-rtc +++ b/Documentation/ABI/testing/sysfs-class-rtc @@ -43,6 +43,14 @@ Contact: linux-rtc@vger.kernel.org Description: (RO) The name of the RTC corresponding to this sysfs directory +What: /sys/class/rtc/rtcX/range +Date: January 2018 +KernelVersion: 4.16 +Contact: linux-rtc@vger.kernel.org +Description: + Valid time range for the RTC, as seconds from epoch, formatted + as [min, max] + What: /sys/class/rtc/rtcX/since_epoch Date: March 2006 KernelVersion: 2.6.17 @@ -57,14 +65,6 @@ Contact: linux-rtc@vger.kernel.org Description: (RO) RTC-provided time in 24-hour notation (hh:mm:ss) -What: /sys/class/rtc/rtcX/*/nvmem -Date: February 2016 -KernelVersion: 4.6 -Contact: linux-rtc@vger.kernel.org -Description: - (RW) The non volatile storage exported as a raw file, as - described in Documentation/nvmem/nvmem.txt - What: /sys/class/rtc/rtcX/offset Date: February 2016 KernelVersion: 4.6 diff --git a/Documentation/ABI/testing/sysfs-class-usb_role b/Documentation/ABI/testing/sysfs-class-usb_role new file mode 100644 index 000000000000..3b810a425a52 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-usb_role @@ -0,0 +1,21 @@ +What: /sys/class/usb_role/ +Date: Jan 2018 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Place in sysfs for USB Role Switches. USB Role Switch is a + device that can select the data role (host or device) for USB + port. + +What: /sys/class/usb_role/<switch>/role +Date: Jan 2018 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The current role of the switch. This attribute can be used for + requesting role swapping with non-USB Type-C ports. With USB + Type-C ports, the ABI defined for USB Type-C connector class + must be used. + + Valid values: + - none + - host + - device diff --git a/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio b/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio new file mode 100644 index 000000000000..1f29c8843cfd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio @@ -0,0 +1,10 @@ +What: /sys/bus/platform/devices/[..]/fsi-master-gpio/external_mode +Date: Feb 2018 +KernelVersion: 4.17 +Contact: jk@ozlabs.org +Description: + Controls access arbitration for GPIO-based FSI master. A + value of 0 (the default) sets normal mode, where the + driver performs FSI bus transactions, 1 sets external mode, + where the FSI bus is driven externally (for example, by + a debug device). diff --git a/Documentation/ABI/testing/sysfs-driver-hid-logitech-hidpp b/Documentation/ABI/testing/sysfs-driver-hid-logitech-hidpp new file mode 100644 index 000000000000..d8f831f2d6b5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-logitech-hidpp @@ -0,0 +1,19 @@ +What: /sys/bus/hid/drivers/logitech-hidpp-device/<dev>/range +Date: Jan, 2016 +KernelVersion: 4.6 +Contact: linux-input@vger.kernel.org +Description: + (RW) This attribute controls the amount of 'turn' permitted in + Logitech G920 wheel. Reading from the file shows the current + range of the steering wheel. Writing a value within the min and + max boundary sets the range of the wheel. + +What: /sys/bus/hid/drivers/logitech-hidpp-device/<dev>/builtin_power_supply +Date: Apr, 2017 +KernelVersion: 4.12 +Contact: linux-input@vger.kernel.org +Description: + Presence of this file indicates that HID++ driver is capable of + handling battery properties in the kernel. This way, upower can + add a udev rule to decide whether or not it should use the + internal unifying support or the generic kernel one. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-ntrig b/Documentation/ABI/testing/sysfs-driver-hid-ntrig new file mode 100644 index 000000000000..e574a5625efe --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-ntrig @@ -0,0 +1,70 @@ +What: /sys/bus/hid/drivers/ntrig/<dev>/activate_slack +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + (RW) Number of contact frames ignored before acknowledging the + start of activity (activating touch). + + +What: /sys/bus/hid/drivers/ntrig/<dev>/decativate_slack +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + (RW) Number of empty (no contact) frames ignored before + acknowledging the end of activity (deactivating touch). + + When the last finger is removed from the device, it sends a + number of empty frames. By holding off on deactivation for a few + frames false erroneous disconnects can be tolerated, where the + sensor may mistakenly not detect a finger that is still present. + + +What: /sys/bus/hid/drivers/ntrig/<dev>/activation_width +What: /sys/bus/hid/drivers/ntrig/<dev>/activation_height +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + Threholds to override activation slack. + + activation_width: (RW) Width threshold to immediately + start processing touch events. + + activation_height: (RW) Height threshold to immediately + start processing touch events. + + +What: /sys/bus/hid/drivers/ntrig/<dev>/min_width +What: /sys/bus/hid/drivers/ntrig/<dev>/min_height +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + Minimum size contact accepted. + + min_width: (RW) Minimum touch contact width to decide + activation and activity. + + min_height: (RW) Minimum touch contact height to decide + activation and activity. + + +What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_width +What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_height +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + (RO) These are internal ranges not used for normal events but + useful for tuning. + + +What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_logical_width +What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_logical_height +Date: May, 2010 +KernelVersion: 2.6.35 +Contact: linux-input@vger.kernel.org +Description: + (RO) The range for positions reported during activity. diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs new file mode 100644 index 000000000000..016724ec26d5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -0,0 +1,885 @@ +What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8 +Date: March 2018 +Contact: linux-scsi@vger.kernel.org +Description: + This file contains the auto-hibernate idle timer setting of a + UFS host controller. A value of '0' means auto-hibernate is not + enabled. Otherwise the value is the number of microseconds of + idle time before the UFS host controller will autonomously put + the link into hibernate state. That will save power at the + expense of increased latency. Note that the hardware supports + 10-bit values with a power-of-ten multiplier which allows a + maximum value of 102300000. Refer to the UFS Host Controller + Interface specification for more details. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the device type. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the device class. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the UFS storage subclass. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the protocol supported by an UFS device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows number of logical units. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows number of well known logical units. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows value that indicates whether the device is + enabled for boot. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows value that indicates whether the device + descriptor could be read after partial initialization phase + of the boot sequence. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows value that defines the power mode after + device initialization or hardware reset. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the high priority lun. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the secure removal type. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the security lun is supported. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the background operations termination + latency. This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the initial active ICC level. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the specification version. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the manufacturing date in BCD format. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the manufacturee ID. This is one of the + UFS device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum number of outstanding RTTs + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the frequency and method of the realtime + clock update. This is one of the UFS device descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows which features are supported by the device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be + found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the FFU timeout. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the device queue depth. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the device version. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows number of secure write protect areas + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum amount of data that may be + written during the pre-soldering phase of the PSA flow. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the command maximum timeout for a change + in PSA state. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the MIPI UniPro version number in BCD format. + This is one of the UFS interconnect descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the MIPI M-PHY version number in BCD format. + This is one of the UFS interconnect descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the total memory quantity available to + the user to configure the device logical units. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum number of logical units + supported by the UFS device. This is one of the UFS + geometry descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the segment size. This is one of the UFS + geometry descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the allocation unit size. This is one of + the UFS geometry descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the minimum addressable block size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the optimal read block size. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the optimal write block size. This is one + of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum data-in buffer size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum data-out buffer size. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at UFS + specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum number of RPMB frames allowed + in Security Protocol In/Out. This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the dynamic capacity resource policy. This + is one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows support for out-of-order data transfer. + This is one of the UFS geometry descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows maximum available number of contexts which + are supported by the device. This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows system data tag unit size. This is one of + the UFS geometry descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows maximum storage area size allocated by + the device to handle system data by the tagging mechanism. + This is one of the UFS geometry descriptor parameters. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows supported secure removal types. This is + one of the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows supported memory types. This is one of + the UFS geometry descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum number of allocation units for + different memory types (system code, non persistent, + enhanced type 1-4). This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the memory capacity adjustment factor for + different memory types (system code, non persistent, + enhanced type 1-4). This is one of the UFS geometry + descriptor parameters. The full information about the + descriptor could be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows preend of life information. This is one + of the UFS health descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows indication of the device life time + (method a). This is one of the UFS health descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows indication of the device life time + (method b). This is one of the UFS health descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc* +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows maximum VCC, VCCQ and VCCQ2 value for + active ICC levels from 0 to 15. This is one of the UFS + power descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file contains a device manufactureer name string. + The full information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file contains a product name string. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file contains a OEM ID string. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file contains a device serial number string. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file contains a product revision string. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + + +What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows boot LUN information. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows LUN write protection status. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows LUN queue depth. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows PSA sensitivity. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows LUN memory type. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file defines the device behavior when a power failure + occurs during a write operation. This is one of the UFS + unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the size of addressable logical blocks + (calculated as an exponent with base 2). This is one of + the UFS unit descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows total number of addressable logical blocks. + This is one of the UFS unit descriptor parameters. The full + information about the descriptor could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the erase block size. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the thin provisioning type. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the total physical memory resources. This is + one of the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the context capabilities. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the granularity of the LUN. This is one of + the UFS unit descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the device init status. The full information + about the flag could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether permanent write protection is enabled. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether write protection is enabled on all + logical units configured as power on write protected. The + full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the device background operations are + enabled. The full information about the flag could be + found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the device life span mode is enabled. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether physical resource removal is enable. + The full information about the flag could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the device is executing internal + operation related to real time clock. The full information + about the flag could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the device FW update is permanently + disabled. The full information about the flag could be found + at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the boot lun enabled UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the current power mode UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the active icc level UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the out of order data transfer enabled UFS + device attribute. The full information about the attribute + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the background operations status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the purge operation status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum data size in a DATA IN + UPIU. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the maximum number of bytes that can be + requested with a READY TO TRANSFER UPIU. The full information + about the attribute could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the reference clock frequency UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows whether the configuration descriptor is locked. + The full information about the attribute could be found at + UFS specifications 2.1. The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the maximum current number of + outstanding RTTs in device that is allowed. The full + information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the exception event control UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the exception event status UFS device + attribute. The full information about the attribute could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file provides the ffu status UFS device attribute. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file show the PSA feature status. The full information + about the attribute could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the amount of data that the host plans to + load to all logical units in pre-soldering state. + The full information about the attribute could be found at + UFS specifications 2.1. + The file is read only. + + +What: /sys/class/scsi_device/*/device/dyn_cap_needed +Date: February 2018 +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Description: This file shows the The amount of physical memory needed + to be removed from the physical memory resources pool of + the particular logical unit. The full information about + the attribute could be found at UFS specifications 2.1. + The file is read only. + + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl +Date: September 2014 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry could be used to set or show the UFS device + runtime power management level. The current driver + implementation supports 6 levels with next target states: + 0 - an UFS device will stay active, an UIC link will + stay active + 1 - an UFS device will stay active, an UIC link will + hibernate + 2 - an UFS device will moved to sleep, an UIC link will + stay active + 3 - an UFS device will moved to sleep, an UIC link will + hibernate + 4 - an UFS device will be powered off, an UIC link will + hibernate + 5 - an UFS device will be powered off, an UIC link will + be powered off + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state +Date: February 2018 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry shows the target power mode of an UFS device + for the chosen runtime power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state +Date: February 2018 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry shows the target state of an UFS UIC link + for the chosen runtime power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl +Date: September 2014 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry could be used to set or show the UFS device + system power management level. The current driver + implementation supports 6 levels with next target states: + 0 - an UFS device will stay active, an UIC link will + stay active + 1 - an UFS device will stay active, an UIC link will + hibernate + 2 - an UFS device will moved to sleep, an UIC link will + stay active + 3 - an UFS device will moved to sleep, an UIC link will + hibernate + 4 - an UFS device will be powered off, an UIC link will + hibernate + 5 - an UFS device will be powered off, an UIC link will + be powered off + +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state +Date: February 2018 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry shows the target power mode of an UFS device + for the chosen system power management level. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state +Date: February 2018 +Contact: Subhash Jadavani <subhashj@codeaurora.org> +Description: This entry shows the target state of an UFS UIC link + for the chosen system power management level. + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index d870b5514d15..540553c933b6 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -192,3 +192,14 @@ Date: November 2017 Contact: "Sheng Yong" <shengyong1@huawei.com> Description: Controls readahead inode block in readdir. + +What: /sys/fs/f2fs/<disk>/extension_list +Date: Feburary 2018 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: + Used to control configure extension list: + - Query: cat /sys/fs/f2fs/<disk>/extension_list + - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list + - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list + - [h] means add/del hot file extension + - [c] means add/del cold file extension diff --git a/Documentation/ABI/testing/sysfs-kernel-irq b/Documentation/ABI/testing/sysfs-kernel-irq index eb074b100986..8910d0c4bcd8 100644 --- a/Documentation/ABI/testing/sysfs-kernel-irq +++ b/Documentation/ABI/testing/sysfs-kernel-irq @@ -51,3 +51,10 @@ Date: September 2016 KernelVersion: 4.9 Contact: Craig Gallek <kraig@google.com> Description: The type of the interrupt. Either the string 'level' or 'edge'. + +What: /sys/kernel/irq/<irq>/wakeup +Date: March 2018 +KernelVersion: 4.17 +Contact: Andy Shevchenko <andriy.shevchenko@linux.intel.com> +Description: The wakeup state of the interrupt. Either the string + 'enabled' or 'disabled'. |
