6 files changed, 123 insertions, 2 deletions
diff --git a/Documentation/ABI/testing/configfs-stp-policy-p_sys-t b/Documentation/ABI/testing/configfs-stp-policy-p_sys-t
new file mode 100644
index 000000000000..b290d1c00dcf
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-stp-policy-p_sys-t
@@ -0,0 +1,41 @@
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/uuid
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		UUID source identifier string, RW.
+		Default value is randomly generated at the mkdir <node> time.
+		Data coming from trace sources that use this <node> will be
+		tagged with this UUID in the MIPI SyS-T packet stream, to
+		allow the decoder to discern between different sources
+		within the same master/channel range, and identify the
+		higher level decoders that may be needed for each source.
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/do_len
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Include payload length in the MIPI SyS-T header, boolean.
+		If enabled, the SyS-T protocol encoder will include payload
+		length in each packet's metadata. This is normally redundant
+		if the underlying transport protocol supports marking message
+		boundaries (which STP does), so this is off by default.
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/ts_interval
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Time interval in milliseconds. Include a timestamp in the
+		MIPI SyS-T packet metadata, if this many milliseconds have
+		passed since the previous packet from this source. Zero is
+		the default and stands for "never send the timestamp".
+
+What:		/config/stp-policy/<device>:p_sys-t.<policy>/<node>/clocksync_interval
+Date:		June 2018
+KernelVersion:	4.19
+Description:
+		Time interval in milliseconds. Send a CLOCKSYNC packet if
+		this many milliseconds have passed since the previous
+		CLOCKSYNC packet from this source. Zero is the default and
+		stands for "never send the CLOCKSYNC". It makes sense to
+		use this option with sources that generate constant and/or
+		periodic data, like stm_heartbeat.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 9281e2aa38df..809765bd9573 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -12,6 +12,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Control descriptors
 
+		All attributes read only:
+		bInterfaceNumber	- USB interface number for this
+					  streaming interface
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
 Date:		Dec 2014
 KernelVersion:	4.0
@@ -109,6 +113,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Streaming descriptors
 
+		All attributes read only:
+		bInterfaceNumber	- USB interface number for this
+					  streaming interface
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/class
 Date:		Dec 2014
 KernelVersion:	4.0
@@ -160,6 +168,10 @@ Description:	Specific MJPEG format descriptors
 
 		All attributes read only,
 		except bmaControls and bDefaultFrameIndex:
+		bFormatIndex		- unique id for this format descriptor;
+					only defined after parent header is
+					linked into the streaming class;
+					read-only
 		bmaControls		- this format's data for bmaControls in
 					the streaming header
 		bmInterfaceFlags	- specifies interlace information,
@@ -177,6 +189,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific MJPEG frame descriptors
 
+		bFrameIndex		- unique id for this framedescriptor;
+					only defined after parent format is
+					linked into the streaming header;
+					read-only
 		dwFrameInterval		- indicates how frame interval can be
 					programmed; a number of values
 					separated by newline can be specified
@@ -204,6 +220,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed format descriptors
 
+		bFormatIndex		- unique id for this format descriptor;
+					only defined after parent header is
+					linked into the streaming class;
+					read-only
 		bmaControls		- this format's data for bmaControls in
 					the streaming header
 		bmInterfaceFlags	- specifies interlace information,
@@ -224,6 +244,10 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Specific uncompressed frame descriptors
 
+		bFrameIndex		- unique id for this framedescriptor;
+					only defined after parent format is
+					linked into the streaming header;
+					read-only
 		dwFrameInterval		- indicates how frame interval can be
 					programmed; a number of values
 					separated by newline can be specified
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index a5b4f223641d..8127a08e366d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -199,7 +199,7 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
-KernelVersion:	4.18
+KernelVersion:	4.19
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Relative position in direction x or y on a pad (may be
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 08d456e07b53..559baa5c418c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -189,6 +189,16 @@ Description:
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/location
+Date:		October 2018
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Some platforms provide usb port physical location through
+		firmware. This is used by the kernel to pair up logical ports
+		mapping to the same physical connector. The attribute exposes the
+		raw location value as a hex integer.
+
+
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/quirks
 Date:		May 2018
 Contact:	Nicolas Boichat <drinkcat@chromium.org>
@@ -219,7 +229,14 @@ Description:
 		ports and report them to the kernel. This attribute is to expose
 		the number of over-current situation occurred on a specific port
 		to user space. This file will contain an unsigned 32 bit value
-		which wraps to 0 after its maximum is reached.
+		which wraps to 0 after its maximum is reached. This file supports
+		poll() for monitoring changes to this value in user space.
+
+		Any time this value changes the corresponding hub device will send a
+		udev event with the following attributes:
+
+		OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+		OVER_CURRENT_COUNT=[current value of this sysfs attribute]
 
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
 Date:		November 2015
diff --git a/Documentation/ABI/testing/sysfs-bus-vmbus b/Documentation/ABI/testing/sysfs-bus-vmbus
new file mode 100644
index 000000000000..91e6c065973c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-vmbus
@@ -0,0 +1,21 @@
+What:		/sys/bus/vmbus/devices/.../driver_override
+Date:		August 2019
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard static and dynamic ID matching.  When
+		specified, only a driver with a name matching the value written
+		to driver_override will have an opportunity to bind to the
+		device.  The override is specified by writing a string to the
+		driver_override file (echo uio_hv_generic > driver_override) and
+		may be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver.  If no driver with a
+		matching name is currently loaded in the kernel, the device
+		will not bind to any driver.  This also allows devices to
+		opt-out of driver binding using a driver_override name such as
+		"none".  Only a single driver may be specified in the override,
+		there is no support for parsing delimiters.
+
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index e2e0fe553ad8..664a8f6a634f 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -91,6 +91,24 @@ Description:
 		stacked (e.g: VLAN interfaces) but still have the same MAC
 		address as their parent device.
 
+What:		/sys/class/net/<iface>/dev_port
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the port number of this network device, formatted
+		as a decimal value. Some NICs have multiple independent ports
+		on the same PCI bus, device and function. This attribute allows
+		userspace to distinguish the respective interfaces.
+
+		Note: some device drivers started to use 'dev_id' for this
+		purpose since long before 3.15 and have not adopted the new
+		attribute ever since. To query the port number, some tools look
+		exclusively at 'dev_port', while others only consult 'dev_id'.
+		If a network device has multiple client adapter ports as
+		described in the previous paragraph and does not set this
+		attribute to its port number, it's a kernel bug.
+
 What:		/sys/class/net/<iface>/dormant
 Date:		March 2006
 KernelVersion:	2.6.17