diff options
| -rw-r--r-- | drivers/platform/x86/dell-laptop.c | 158 |
1 files changed, 119 insertions, 39 deletions
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 83e3d7f9d923..ab89103150b5 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -423,45 +423,125 @@ static inline int dell_smi_error(int value) } } -/* Derived from information in DellWirelessCtl.cpp: - Class 17, select 11 is radio control. It returns an array of 32-bit values. - - Input byte 0 = 0: Wireless information - - result[0]: return code - result[1]: - Bit 0: Hardware switch supported - Bit 1: Wifi locator supported - Bit 2: Wifi is supported - Bit 3: Bluetooth is supported - Bit 4: WWAN is supported - Bit 5: Wireless keyboard supported - Bits 6-7: Reserved - Bit 8: Wifi is installed - Bit 9: Bluetooth is installed - Bit 10: WWAN is installed - Bits 11-15: Reserved - Bit 16: Hardware switch is on - Bit 17: Wifi is blocked - Bit 18: Bluetooth is blocked - Bit 19: WWAN is blocked - Bits 20-31: Reserved - result[2]: NVRAM size in bytes - result[3]: NVRAM format version number - - Input byte 0 = 2: Wireless switch configuration - result[0]: return code - result[1]: - Bit 0: Wifi controlled by switch - Bit 1: Bluetooth controlled by switch - Bit 2: WWAN controlled by switch - Bits 3-6: Reserved - Bit 7: Wireless switch config locked - Bit 8: Wifi locator enabled - Bits 9-14: Reserved - Bit 15: Wifi locator setting locked - Bits 16-31: Reserved -*/ +/* + * Derived from information in smbios-wireless-ctl: + * + * cbSelect 17, Value 11 + * + * Return Wireless Info + * cbArg1, byte0 = 0x00 + * + * cbRes1 Standard return codes (0, -1, -2) + * cbRes2 Info bit flags: + * + * 0 Hardware switch supported (1) + * 1 WiFi locator supported (1) + * 2 WLAN supported (1) + * 3 Bluetooth (BT) supported (1) + * 4 WWAN supported (1) + * 5 Wireless KBD supported (1) + * 6 Uw b supported (1) + * 7 WiGig supported (1) + * 8 WLAN installed (1) + * 9 BT installed (1) + * 10 WWAN installed (1) + * 11 Uw b installed (1) + * 12 WiGig installed (1) + * 13-15 Reserved (0) + * 16 Hardware (HW) switch is On (1) + * 17 WLAN disabled (1) + * 18 BT disabled (1) + * 19 WWAN disabled (1) + * 20 Uw b disabled (1) + * 21 WiGig disabled (1) + * 20-31 Reserved (0) + * + * cbRes3 NVRAM size in bytes + * cbRes4, byte 0 NVRAM format version number + * + * + * Set QuickSet Radio Disable Flag + * cbArg1, byte0 = 0x01 + * cbArg1, byte1 + * Radio ID value: + * 0 Radio Status + * 1 WLAN ID + * 2 BT ID + * 3 WWAN ID + * 4 UWB ID + * 5 WIGIG ID + * cbArg1, byte2 Flag bits: + * 0 QuickSet disables radio (1) + * 1-7 Reserved (0) + * + * cbRes1 Standard return codes (0, -1, -2) + * cbRes2 QuickSet (QS) radio disable bit map: + * 0 QS disables WLAN + * 1 QS disables BT + * 2 QS disables WWAN + * 3 QS disables UWB + * 4 QS disables WIGIG + * 5-31 Reserved (0) + * + * Wireless Switch Configuration + * cbArg1, byte0 = 0x02 + * + * cbArg1, byte1 + * Subcommand: + * 0 Get config + * 1 Set config + * 2 Set WiFi locator enable/disable + * cbArg1,byte2 + * Switch settings (if byte 1==1): + * 0 WLAN sw itch control (1) + * 1 BT sw itch control (1) + * 2 WWAN sw itch control (1) + * 3 UWB sw itch control (1) + * 4 WiGig sw itch control (1) + * 5-7 Reserved (0) + * cbArg1, byte2 Enable bits (if byte 1==2): + * 0 Enable WiFi locator (1) + * + * cbRes1 Standard return codes (0, -1, -2) + * cbRes2 QuickSet radio disable bit map: + * 0 WLAN controlled by sw itch (1) + * 1 BT controlled by sw itch (1) + * 2 WWAN controlled by sw itch (1) + * 3 UWB controlled by sw itch (1) + * 4 WiGig controlled by sw itch (1) + * 5-6 Reserved (0) + * 7 Wireless sw itch config locked (1) + * 8 WiFi locator enabled (1) + * 9-14 Reserved (0) + * 15 WiFi locator setting locked (1) + * 16-31 Reserved (0) + * + * Read Local Config Data (LCD) + * cbArg1, byte0 = 0x10 + * cbArg1, byte1 NVRAM index low byte + * cbArg1, byte2 NVRAM index high byte + * cbRes1 Standard return codes (0, -1, -2) + * cbRes2 4 bytes read from LCD[index] + * cbRes3 4 bytes read from LCD[index+4] + * cbRes4 4 bytes read from LCD[index+8] + * + * Write Local Config Data (LCD) + * cbArg1, byte0 = 0x11 + * cbArg1, byte1 NVRAM index low byte + * cbArg1, byte2 NVRAM index high byte + * cbArg2 4 bytes to w rite at LCD[index] + * cbArg3 4 bytes to w rite at LCD[index+4] + * cbArg4 4 bytes to w rite at LCD[index+8] + * cbRes1 Standard return codes (0, -1, -2) + * + * Populate Local Config Data from NVRAM + * cbArg1, byte0 = 0x12 + * cbRes1 Standard return codes (0, -1, -2) + * + * Commit Local Config Data to NVRAM + * cbArg1, byte0 = 0x13 + * cbRes1 Standard return codes (0, -1, -2) + */ static int dell_rfkill_set(void *data, bool blocked) { |
