summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap1/include/mach/debug-macro.S21
-rw-r--r--arch/arm/mach-omap2/include/mach/debug-macro.S11
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h14
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h44
4 files changed, 43 insertions, 47 deletions
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index b6d9584544b4..e8a8cf36b7f0 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,6 +13,8 @@
#include <linux/serial_reg.h>
+#include <asm/memory.h>
+
#include <plat/serial.h>
.pushsection .data
@@ -37,23 +39,12 @@ omap_uart_virt: .word 0x0
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
- /* Check 7XX UART1 scratchpad register for uart to use */
+ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xff000000 @ physical base address
- movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
- ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
- cmp \rx, #0 @ anything in 7XX scratchpad?
- bne 10f @ found 7XX uart
-
- /* Check 15xx/16xx UART1 scratchpad register for uart to use */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xff000000 @ physical base address
- movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
- ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+ ldreq \rx, =OMAP_UART_INFO
+ ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
+ ldr \rx, [\rx, #0]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rx, #0 @ no port configured?
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 4a63a2ea484d..4976169d9f36 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,6 +13,8 @@
#include <linux/serial_reg.h>
+#include <asm/memory.h>
+
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
@@ -40,13 +42,12 @@ omap_uart_lsr: .word 0
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
- /* Check UART1 scratchpad register for uart to use */
+ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4
- ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+ ldreq \rx, =OMAP_UART_INFO
+ ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
+ ldr \rx, [\rx, #0]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rx, #0 @ no port configured?
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 83dce4c4f7e6..42a6318dd305 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,6 +15,20 @@
#include <linux/init.h>
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc)
+
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
#define OMAP1_UART2_BASE 0xfffb0800
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 81d9ec540fcf..bbedd71943f6 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -20,27 +20,21 @@
#include <linux/types.h>
#include <linux/serial_reg.h>
+#include <asm/memory.h>
#include <asm/mach-types.h>
#include <plat/serial.h>
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
static volatile u8 *uart_base;
static int uart_shift;
/*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
* See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
*/
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
{
- uart1_base[UART_SCR << uart1_shift] = port;
+ *(volatile u32 *)OMAP_UART_INFO = port;
}
static void putc(int c)
@@ -60,42 +54,38 @@ static inline void flush(void)
/*
* Macros to configure UART1 and debug UART
*/
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \
- dbg_uart, dbg_shft, dbg_id) \
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
if (machine_is_##mach()) { \
- uart1_base = (volatile u8 *)(uart1_phys); \
- uart1_shift = (uart1_shft); \
uart_base = (volatile u8 *)(dbg_uart); \
uart_shift = (dbg_shft); \
port = (dbg_id); \
- set_uart1_scratchpad(port); \
+ set_omap_uart_info(port); \
break; \
}
#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
/* Zoom2/3 shift is different for UART1 and external port */
#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
- ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
OpenPOWER on IntegriCloud