summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt38
-rw-r--r--arch/arm/boot/dts/meson8.dtsi57
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi12
-rw-r--r--arch/arm/configs/u8500_defconfig3
-rw-r--r--arch/arm/mach-uniphier/platsmp.c2
-rw-r--r--arch/arm64/boot/dts/broadcom/vulcan.dtsi15
-rw-r--r--drivers/bus/uniphier-system-bus.c2
7 files changed, 63 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 3f6a524cc5ff..32f4a2d6d0b3 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -1,13 +1,16 @@
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
+ - compatible: one of "amlogic,meson8-cbus-pinctrl"
+ "amlogic,meson8b-cbus-pinctrl"
+ "amlogic,meson8-aobus-pinctrl"
+ "amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
-The 2 power domains of the controller (regular and always-on) are
-represented as sub-nodes and each of them acts as a GPIO controller.
+The GPIO bank for the controller is represented as a sub-node and it acts as a
+GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
-Valid sub-node names are:
- - "banks" for the regular domain
- - "ao-bank" for the always-on domain
-
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-pinctrl";
+ compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
-
- uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a",
- "uart_cts_ao_a", "uart_rts_ao_a";
- function = "uart_ao";
- };
-
- conf {
- pins = "GPIOAO_0", "GPIOAO_1",
- "GPIOAO_2", "GPIOAO_3";
- bias-disable;
- };
- };
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a2ddcb8c545a..45619f6162c5 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -91,8 +91,8 @@
clock-frequency = <141666666>;
};
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-pinctrl";
+ pinctrl_cbus: pinctrl@c1109880 {
+ compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -108,29 +108,6 @@
#gpio-cells = <2>;
};
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- };
- };
-
- i2c_ao_pins: i2c_mst_ao {
- mux {
- groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
- function = "i2c_mst_ao";
- };
- };
-
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
};
};
+ pinctrl_aobus: pinctrl@c8100084 {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ reg = <0xc8100084 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
+ };
+ };
+ };
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 8bad5571af46..2bfe401a4da9 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -155,8 +155,8 @@
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8b-pinctrl";
+ pinctrl_cbus: pinctrl@c1109880 {
+ compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -171,6 +171,14 @@
gpio-controller;
#gpio-cells = <2>;
};
+ };
+
+ pinctrl_aobus: pinctrl@c8100084 {
+ compatible = "amlogic,meson8b-aobus-pinctrl";
+ reg = <0xc8100084 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 07055eacbb0f..a691d590fbd1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 69141357afe8..db04142f88bc 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
if (ret)
return ret;
- uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+ uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
index c49b5a85809c..85820e2bca9d 100644
--- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi
+++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
@@ -108,12 +108,15 @@
reg = <0x0 0x30000000 0x0 0x10000000>;
reg-names = "PCI ECAM";
- /* IO 0x4000_0000 - 0x4001_0000 */
- ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
- /* MEM 0x4800_0000 - 0x5000_0000 */
- 0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
- /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
- 0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
+ /*
+ * PCI ranges:
+ * IO no supported
+ * MEM 0x4000_0000 - 0x6000_0000
+ * MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+ */
+ ranges =
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
+ 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index 834a2aeaf27a..350b7309c26d 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap(
for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
- if (priv->bank[i].end > priv->bank[j].base ||
+ if (priv->bank[i].end > priv->bank[j].base &&
priv->bank[i].base < priv->bank[j].end) {
dev_err(priv->dev,
"region overlap between bank%d and bank%d\n",
OpenPOWER on IntegriCloud