summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/da905547
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/da9055-hwmon.c336
4 files changed, 394 insertions, 0 deletions
diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055
new file mode 100644
index 000000000000..855c3f536e00
--- /dev/null
+++ b/Documentation/hwmon/da9055
@@ -0,0 +1,47 @@
+Supported chips:
+ * Dialog Semiconductors DA9055 PMIC
+ Prefix: 'da9055'
+ Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 5
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+By using sysfs attributes we can measure the system voltage VDDOUT,
+chip junction temperature and auxiliary channels voltages.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled in a AUTO mode it can be manually sampled too and results
+are stored in a 10 bit ADC.
+
+The system voltage is calculated as:
+ Milli volt = ((ADC value * 1000) / 85) + 2500
+
+The voltages on ADC channels 1, 2 and 3 are calculated as:
+ Milli volt = (ADC value * 1000) / 102
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC. Junction temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+ Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+The junction temperature attribute is supported by the driver.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 42f21ad56276..4800d4c2a7b7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -334,6 +334,16 @@ config SENSORS_DA9052_ADC
This driver can also be built as module. If so, the module
will be called da9052-hwmon.
+config SENSORS_DA9055
+ tristate "Dialog Semiconductor DA9055 ADC"
+ depends on MFD_DA9055
+ help
+ If you say yes here you get support for ADC on the Dialog
+ Semiconductor DA9055 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9055-hwmon.
+
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8d5fcb5e8e9f..a930f0997d25 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
+obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c
new file mode 100644
index 000000000000..d32edaea86d5
--- /dev/null
+++ b/drivers/hwmon/da9055-hwmon.c
@@ -0,0 +1,336 @@
+/*
+ * HWMON Driver for Dialog DA9055
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+#define DA9055_ADCIN_DIV 102
+#define DA9055_VSYS_DIV 85
+
+#define DA9055_ADC_VSYS 0
+#define DA9055_ADC_ADCIN1 1
+#define DA9055_ADC_ADCIN2 2
+#define DA9055_ADC_ADCIN3 3
+#define DA9055_ADC_TJUNC 4
+
+struct da9055_hwmon {
+ struct da9055 *da9055;
+ struct device *class_device;
+ struct mutex hwmon_lock;
+ struct mutex irq_lock;
+ struct completion done;
+};
+
+static const char * const input_names[] = {
+ [DA9055_ADC_VSYS] = "VSYS",
+ [DA9055_ADC_ADCIN1] = "ADC IN1",
+ [DA9055_ADC_ADCIN2] = "ADC IN2",
+ [DA9055_ADC_ADCIN3] = "ADC IN3",
+ [DA9055_ADC_TJUNC] = "CHIP TEMP",
+};
+
+static const u8 chan_mux[DA9055_ADC_TJUNC + 1] = {
+ [DA9055_ADC_VSYS] = DA9055_ADC_MUX_VSYS,
+ [DA9055_ADC_ADCIN1] = DA9055_ADC_MUX_ADCIN1,
+ [DA9055_ADC_ADCIN2] = DA9055_ADC_MUX_ADCIN2,
+ [DA9055_ADC_ADCIN3] = DA9055_ADC_MUX_ADCIN1,
+ [DA9055_ADC_TJUNC] = DA9055_ADC_MUX_T_SENSE,
+};
+
+static int da9055_adc_manual_read(struct da9055_hwmon *hwmon,
+ unsigned char channel)
+{
+ int ret;
+ unsigned short calc_data;
+ unsigned short data;
+ unsigned char mux_sel;
+ struct da9055 *da9055 = hwmon->da9055;
+
+ if (channel > DA9055_ADC_TJUNC)
+ return -EINVAL;
+
+ mutex_lock(&hwmon->irq_lock);
+
+ /* Selects desired MUX for manual conversion */
+ mux_sel = chan_mux[channel] | DA9055_ADC_MAN_CONV;
+
+ ret = da9055_reg_write(da9055, DA9055_REG_ADC_MAN, mux_sel);
+ if (ret < 0)
+ goto err;
+
+ /* Wait for an interrupt */
+ if (!wait_for_completion_timeout(&hwmon->done,
+ msecs_to_jiffies(500))) {
+ dev_err(da9055->dev,
+ "timeout waiting for ADC conversion interrupt\n");
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_H);
+ if (ret < 0)
+ goto err;
+
+ calc_data = (unsigned short)ret;
+ data = calc_data << 2;
+
+ ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_L);
+ if (ret < 0)
+ goto err;
+
+ calc_data = (unsigned short)(ret & DA9055_ADC_LSB_MASK);
+ data |= calc_data;
+
+ ret = data;
+
+err:
+ mutex_unlock(&hwmon->irq_lock);
+ return ret;
+}
+
+static irqreturn_t da9055_auxadc_irq(int irq, void *irq_data)
+{
+ struct da9055_hwmon *hwmon = irq_data;
+
+ complete(&hwmon->done);
+
+ return IRQ_HANDLED;
+}
+
+/* Conversion function for VSYS and ADCINx */
+static inline int volt_reg_to_mV(int value, int channel)
+{
+ if (channel == DA9055_ADC_VSYS)
+ return DIV_ROUND_CLOSEST(value * 1000, DA9055_VSYS_DIV) + 2500;
+ else
+ return DIV_ROUND_CLOSEST(value * 1000, DA9055_ADCIN_DIV);
+}
+
+static int da9055_enable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+ return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel,
+ 1 << channel);
+
+}
+
+static int da9055_disable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+ return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel, 0);
+}
+
+static ssize_t da9055_read_auto_ch(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret, adc;
+ int channel = to_sensor_dev_attr(devattr)->index;
+
+ mutex_lock(&hwmon->hwmon_lock);
+
+ ret = da9055_enable_auto_mode(hwmon->da9055, channel);
+ if (ret < 0)
+ goto hwmon_err;
+
+ usleep_range(10000, 10500);
+
+ adc = da9055_reg_read(hwmon->da9055, DA9055_REG_VSYS_RES + channel);
+ if (adc < 0) {
+ ret = adc;
+ goto hwmon_err_release;
+ }
+
+ ret = da9055_disable_auto_mode(hwmon->da9055, channel);
+ if (ret < 0)
+ goto hwmon_err;
+
+ mutex_unlock(&hwmon->hwmon_lock);
+
+ return sprintf(buf, "%d\n", volt_reg_to_mV(adc, channel));
+
+hwmon_err_release:
+ da9055_disable_auto_mode(hwmon->da9055, channel);
+hwmon_err:
+ mutex_unlock(&hwmon->hwmon_lock);
+ return ret;
+}
+
+static ssize_t da9055_read_tjunc(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+ int tjunc;
+ int toffset;
+
+ tjunc = da9055_adc_manual_read(hwmon, DA9055_ADC_TJUNC);
+ if (tjunc < 0)
+ return tjunc;
+
+ toffset = da9055_reg_read(hwmon->da9055, DA9055_REG_T_OFFSET);
+ if (toffset < 0)
+ return toffset;
+
+ /*
+ * Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+ * T_OFFSET is a trim value used to improve accuracy of the result
+ */
+ return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(-4084 * (tjunc - toffset)
+ + 3076332, 10000));
+}
+
+static ssize_t da9055_hwmon_show_name(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ return sprintf(buf, "da9055-hwmon\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n",
+ input_names[to_sensor_dev_attr(devattr)->index]);
+}
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9055_read_auto_ch, NULL,
+ DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL,
+ DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, da9055_read_auto_ch, NULL,
+ DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL,
+ DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, da9055_read_auto_ch, NULL,
+ DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL,
+ DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9055_read_auto_ch, NULL,
+ DA9055_ADC_ADCIN3);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL,
+ DA9055_ADC_ADCIN3);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9055_read_tjunc, NULL,
+ DA9055_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ DA9055_ADC_TJUNC);
+
+static DEVICE_ATTR(name, S_IRUGO, da9055_hwmon_show_name, NULL);
+
+static struct attribute *da9055_attr[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group da9055_attr_group = {.attrs = da9055_attr};
+
+static int da9055_hwmon_probe(struct platform_device *pdev)
+{
+ struct da9055_hwmon *hwmon;
+ int hwmon_irq, ret;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9055_hwmon),
+ GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ mutex_init(&hwmon->hwmon_lock);
+ mutex_init(&hwmon->irq_lock);
+
+ init_completion(&hwmon->done);
+ hwmon->da9055 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, hwmon);
+
+ hwmon_irq = platform_get_irq_byname(pdev, "HWMON");
+ if (hwmon_irq < 0)
+ return hwmon_irq;
+
+ hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq);
+ if (hwmon_irq < 0)
+ return hwmon_irq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq,
+ NULL, da9055_auxadc_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "adc-irq", hwmon);
+ if (ret != 0) {
+ dev_err(hwmon->da9055->dev, "DA9055 ADC IRQ failed ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &da9055_attr_group);
+ if (ret)
+ return ret;
+
+ hwmon->class_device = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->class_device)) {
+ ret = PTR_ERR(hwmon->class_device);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+ return ret;
+}
+
+static int da9055_hwmon_remove(struct platform_device *pdev)
+{
+ struct da9055_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+ hwmon_device_unregister(hwmon->class_device);
+
+ return 0;
+}
+
+static struct platform_driver da9055_hwmon_driver = {
+ .probe = da9055_hwmon_probe,
+ .remove = da9055_hwmon_remove,
+ .driver = {
+ .name = "da9055-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(da9055_hwmon_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 HWMON driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-hwmon");
OpenPOWER on IntegriCloud