diff options
| -rw-r--r-- | arch/arm/mach-at91/include/mach/board.h | 55 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/board.h | 7 | ||||
| -rw-r--r-- | drivers/ata/pata_at91.c | 2 | ||||
| -rw-r--r-- | drivers/input/touchscreen/atmel_tsadcc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 2 | ||||
| -rw-r--r-- | drivers/net/can/at91_can.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/cadence/at91_ether.c | 2 | ||||
| -rw-r--r-- | drivers/pcmcia/at91_cf.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-at91sam9.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-atmel.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/at91_udc.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/atmel_usba_udc.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 2 | ||||
| -rw-r--r-- | drivers/video/atmel_lcdfb.c | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/atmel.h | 67 |
16 files changed, 80 insertions, 76 deletions
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c55a4364ffb4..662451d85fc9 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -31,42 +31,15 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include <linux/mtd/partitions.h> -#include <linux/device.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/usb/atmel_usba_udc.h> -#include <linux/atmel-mci.h> -#include <sound/atmel-ac97c.h> -#include <linux/serial.h> -#include <linux/platform_data/macb.h> #include <linux/platform_data/atmel.h> /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ @@ -86,16 +59,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +87,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +129,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 70742ec997f8..dca93450cb0e 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -34,13 +34,6 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CTS 0x02 #define ATMEL_USART_CLK 0x04 -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 53d3770a0b1b..2a96bb2c53ee 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -27,9 +27,9 @@ #include <linux/libata.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> +#include <linux/platform_data/atmel.h> #include <mach/at91sam9_smc.h> -#include <mach/board.h> #include <asm/gpio.h> #define DRV_NAME "pata_at91" diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 201b2d2ec1b3..ea392ee138ed 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -22,7 +22,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/board.h> +#include <linux/platform_data/atmel.h> #include <mach/cpu.h> /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index ddf096e3803f..868998925826 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -28,6 +28,7 @@ #include <linux/slab.h> #include <linux/stat.h> #include <linux/types.h> +#include <linux/platform_data/atmel.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio.h> @@ -40,7 +41,6 @@ #include <asm/unaligned.h> #include <mach/cpu.h> -#include <mach/board.h> #include "atmel-mci-regs.h" diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index fcff73a73b1d..994b6acd65f4 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -33,12 +33,11 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/types.h> +#include <linux/platform_data/atmel.h> #include <linux/can/dev.h> #include <linux/can/error.h> -#include <mach/board.h> - #define AT91_MB_MASK(i) ((1 << (i)) - 1) /* Common registers */ diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 4e980a7886fb..35fc6edbacf8 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -31,6 +31,7 @@ #include <linux/clk.h> #include <linux/gfp.h> #include <linux/phy.h> +#include <linux/platform_data/atmel.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -38,7 +39,6 @@ #include <mach/at91rm9200_emac.h> #include <asm/gpio.h> -#include <mach/board.h> #include "at91_ether.h" diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 9694c1e783a5..01463c781847 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/gpio.h> +#include <linux/platform_data/atmel.h> #include <pcmcia/ss.h> @@ -24,7 +25,6 @@ #include <asm/io.h> #include <asm/sizes.h> -#include <mach/board.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2dfe7a2fb998..e981798e9a9b 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -19,8 +19,8 @@ #include <linux/interrupt.h> #include <linux/ioctl.h> #include <linux/slab.h> +#include <linux/platform_data/atmel.h> -#include <mach/board.h> #include <mach/at91_rtt.h> #include <mach/cpu.h> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 16d6a839c7fa..61fb0ec26f06 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -19,9 +19,9 @@ #include <linux/interrupt.h> #include <linux/spi/spi.h> #include <linux/slab.h> +#include <linux/platform_data/atmel.h> #include <asm/io.h> -#include <mach/board.h> #include <asm/gpio.h> #include <mach/cpu.h> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3d7e1ee2fa57..5660ec2618a3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -39,12 +39,12 @@ #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> #include <linux/uaccess.h> +#include <linux/platform_data/atmel.h> #include <asm/io.h> #include <asm/ioctls.h> #include <asm/mach/serial_at91.h> -#include <mach/board.h> #ifdef CONFIG_ARM #include <mach/cpu.h> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 89d90b5fb787..a7b042b781d5 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -31,6 +31,7 @@ #include <linux/usb/gadget.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/platform_data/atmel.h> #include <asm/byteorder.h> #include <mach/hardware.h> @@ -38,7 +39,6 @@ #include <asm/irq.h> #include <asm/gpio.h> -#include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9a9bced813ed..a7aed84d98c9 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -21,9 +21,9 @@ #include <linux/usb/gadget.h> #include <linux/usb/atmel_usba_udc.h> #include <linux/delay.h> +#include <linux/platform_data/atmel.h> #include <asm/gpio.h> -#include <mach/board.h> #include "atmel_usba_udc.h" diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 0bf72f943b00..8e62f81ae1ed 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -16,11 +16,11 @@ #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> +#include <linux/platform_data/atmel.h> #include <mach/hardware.h> #include <asm/gpio.h> -#include <mach/board.h> #include <mach/cpu.h> #ifndef CONFIG_ARCH_AT91 diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 94cac9f9919f..12cf5f31ee8f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -19,8 +19,8 @@ #include <linux/backlight.h> #include <linux/gfp.h> #include <linux/module.h> +#include <linux/platform_data/atmel.h> -#include <mach/board.h> #include <mach/cpu.h> #include <asm/gpio.h> diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index b0f2c56a8ea2..dbd6d53cc270 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -8,6 +8,49 @@ #define __ATMEL_H__ #include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> +#include <linux/atmel-mci.h> +#include <sound/atmel-ac97c.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; /* NAND / SmartMedia */ struct atmel_nand_data { @@ -24,4 +67,28 @@ struct atmel_nand_data { unsigned int num_parts; }; + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + + /* Touchscreen Controller */ +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif /* __ATMEL_H__ */ |
