summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap2/omap-headsmp.S35
-rw-r--r--arch/arm/mach-omap2/omap-smp.c24
-rw-r--r--arch/arm/plat-omap/include/plat/smp.h2
3 files changed, 37 insertions, 24 deletions
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 4afadba09477..aa3f65c2ac97 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -27,20 +27,39 @@
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
* secondary core is held until we're ready for it to initialise.
- * The primary core will update the this flag using a hardware
- * register AuxCoreBoot1.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
*/
ENTRY(omap_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #0x0f
-hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1
- ldr r2, [r1]
- cmp r2, r0
+hold: ldr r12,=0x103
+ dsb
+ smc @ read from AuxCoreBoot0
+ mov r0, r0, lsr #9
+ mrc p15, 0, r4, c0, c0, 5
+ and r4, r4, #0x0f
+ cmp r0, r4
bne hold
/*
- * we've been released from the cpu_release,secondary_stack
+ * we've been released from the wait loop,secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
+END(omap_secondary_startup)
+
+ENTRY(omap_modify_auxcoreboot0)
+ stmfd sp!, {r1-r12, lr}
+ ldr r12, =0x104
+ dsb
+ smc
+ ldmfd sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+ stmfd sp!, {r2-r12, lr}
+ ldr r12, =0x105
+ dsb
+ smc
+ ldmfd sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 4890bcf4dadd..59e847843af5 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,15 +21,12 @@
#include <linux/smp.h>
#include <linux/io.h>
+#include <asm/cacheflush.h>
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <plat/common.h>
-/* Registers used for communicating startup information */
-static void __iomem *omap4_auxcoreboot_reg0;
-static void __iomem *omap4_auxcoreboot_reg1;
-
/* SCU base address */
static void __iomem *scu_base;
@@ -74,12 +71,13 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
spin_lock(&boot_lock);
/*
- * Update the AuxCoreBoot1 with boot state for secondary core.
+ * Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
- __raw_writel(cpu, omap4_auxcoreboot_reg1);
+ omap_modify_auxcoreboot0(0x200, 0x0);
+ flush_cache_all();
smp_wmb();
timeout = jiffies + (1 * HZ);
@@ -99,17 +97,18 @@ static void __init wakeup_secondary(void)
{
/*
* Write the address of secondary startup routine into the
- * AuxCoreBoot0 where ROM code will jump and start executing
+ * AuxCoreBoot1 where ROM code will jump and start executing
* on secondary core once out of WFE
* A barrier is added to ensure that write buffer is drained
*/
- __raw_writel(virt_to_phys(omap_secondary_startup), \
- omap4_auxcoreboot_reg0);
+ omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
smp_wmb();
/*
* Send a 'sev' to wake the secondary core from WFE.
+ * Drain the outstanding writes to memory
*/
+ dsb();
set_event();
mb();
}
@@ -136,7 +135,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = get_core_count();
unsigned int cpu = smp_processor_id();
- void __iomem *omap4_wkupgen_base;
int i;
/* sanity check */
@@ -168,12 +166,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- /* Never released */
- omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
- BUG_ON(!omap4_wkupgen_base);
- omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
- omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804;
-
if (max_cpus > 1) {
/*
* Enable the local timer or broadcast device for the
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index dcaa8fde7063..8983d54c4fd2 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -28,6 +28,8 @@
/* Needed for secondary core boot */
extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
/*
* We use Soft IRQ1 as the IPI
OpenPOWER on IntegriCloud