diff options
| -rw-r--r-- | Documentation/devicetree/bindings/ata/marvell.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/ata/sata_rcar.txt | 18 | ||||
| -rw-r--r-- | arch/arm/boot/dts/armada-370-xp.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/regs-ata.h | 56 | ||||
| -rw-r--r-- | drivers/ata/ahci.c | 62 | ||||
| -rw-r--r-- | drivers/ata/ahci_imx.c | 242 | ||||
| -rw-r--r-- | drivers/ata/ata_generic.c | 7 | ||||
| -rw-r--r-- | drivers/ata/libahci.c | 4 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 27 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 5 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 18 | ||||
| -rw-r--r-- | drivers/ata/pata_samsung_cf.c | 43 | ||||
| -rw-r--r-- | drivers/ata/sata_highbank.c | 1 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 52 | ||||
| -rw-r--r-- | drivers/ata/sata_rcar.c | 118 | ||||
| -rw-r--r-- | include/linux/libata.h | 2 |
16 files changed, 458 insertions, 201 deletions
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt index b5cdd20cde9c..1c8351604d38 100644 --- a/Documentation/devicetree/bindings/ata/marvell.txt +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -1,7 +1,7 @@ * Marvell Orion SATA Required Properties: -- compatibility : "marvell,orion-sata" +- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata" - reg : Address range of controller - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use. diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt new file mode 100644 index 000000000000..1e6111333fa8 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -0,0 +1,18 @@ +* Renesas R-Car SATA + +Required properties: +- compatible : should contain one of the following: + - "renesas,sata-r8a7779" for R-Car H1 + - "renesas,sata-r8a7790" for R-Car H2 + - "renesas,sata-r8a7791" for R-Car M2 +- reg : address and length of the SATA registers; +- interrupts : must consist of one interrupt specifier. + +Example: + +sata: sata@fc600000 { + compatible = "renesas,sata-r8a7779"; + reg = <0xfc600000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 7f10f627ae5b..80ffacd128f8 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -152,7 +152,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <55>; clocks = <&gateclk 15>, <&gateclk 30>; diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h deleted file mode 100644 index f5df92fdae26..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-ata.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_REGS_ATA_H -#define __ASM_PLAT_REGS_ATA_H __FILE__ - -#define S3C_CFATA_REG(x) (x) - -#define S3C_CFATA_MUX S3C_CFATA_REG(0x0) - -#define S3C_ATA_CTRL S3C_CFATA_REG(0x0) -#define S3C_ATA_STATUS S3C_CFATA_REG(0x4) -#define S3C_ATA_CMD S3C_CFATA_REG(0x8) -#define S3C_ATA_SWRST S3C_CFATA_REG(0xc) -#define S3C_ATA_IRQ S3C_CFATA_REG(0x10) -#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14) -#define S3C_ATA_CFG S3C_CFATA_REG(0x18) - -#define S3C_ATA_MDMA_TIME S3C_CFATA_REG(0x28) -#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c) -#define S3C_ATA_UDMA_TIME S3C_CFATA_REG(0x30) -#define S3C_ATA_XFR_NUM S3C_CFATA_REG(0x34) -#define S3C_ATA_XFR_CNT S3C_CFATA_REG(0x38) -#define S3C_ATA_TBUF_START S3C_CFATA_REG(0x3c) -#define S3C_ATA_TBUF_SIZE S3C_CFATA_REG(0x40) -#define S3C_ATA_SBUF_START S3C_CFATA_REG(0x44) -#define S3C_ATA_SBUF_SIZE S3C_CFATA_REG(0x48) -#define S3C_ATA_CADR_TBUF S3C_CFATA_REG(0x4c) -#define S3C_ATA_CADR_SBUF S3C_CFATA_REG(0x50) -#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54) -#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58) -#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c) -#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60) -#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64) -#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68) -#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c) -#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70) -#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74) -#define S3C_ATA_PIO_READY S3C_CFATA_REG(0x78) -#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c) - -#define S3C_CFATA_MUX_TRUEIDE 0x01 - -#define S3C_ATA_CFG_SWAP 0x40 -#define S3C_ATA_CFG_IORDYEN 0x02 - -#endif /* __ASM_PLAT_REGS_ATA_H */ diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e3a92a6da39a..74911c2cb1dd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -83,6 +83,8 @@ enum board_ids { static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static void ahci_mcp89_apple_enable(struct pci_dev *pdev); +static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); #ifdef CONFIG_PM @@ -664,6 +666,10 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) if (rc) return rc; + /* Apple BIOS helpfully mangles the registers on resume */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { rc = ahci_pci_reset_controller(host); if (rc) @@ -780,6 +786,48 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +/* + * Macbook7,1 firmware forcibly disables MCP89 AHCI and changes PCI ID when + * booting in BIOS compatibility mode. We restore the registers but not ID. + */ +static void ahci_mcp89_apple_enable(struct pci_dev *pdev) +{ + u32 val; + + printk(KERN_INFO "ahci: enabling MCP89 AHCI mode\n"); + + pci_read_config_dword(pdev, 0xf8, &val); + val |= 1 << 0x1b; + /* the following changes the device ID, but appears not to affect function */ + /* val = (val & ~0xf0000000) | 0x80000000; */ + pci_write_config_dword(pdev, 0xf8, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val |= 1 << 0xc; + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0x4a4, &val); + val &= 0xff; + val |= 0x01060100; + pci_write_config_dword(pdev, 0x4a4, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val &= ~(1 << 0xc); + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0xf8, &val); + val &= ~(1 << 0x1b); + pci_write_config_dword(pdev, 0xf8, val); +} + +static bool is_mcp89_apple(struct pci_dev *pdev) +{ + return pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && + pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && + pdev->subsystem_device == 0xcb89; +} + /* only some SB600 ahci controllers can do 64bit DMA */ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) { @@ -1100,7 +1148,7 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif -int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv) +static int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { int rc; unsigned int maxvec; @@ -1212,15 +1260,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) return -ENODEV; - /* - * For some reason, MCP89 on MacBook 7,1 doesn't work with - * ahci, use ata_generic instead. - */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && - pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && - pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && - pdev->subsystem_device == 0xcb89) - return -ENODEV; + /* Apple BIOS on MCP89 prevents us using AHCI */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode. * At the moment, we can only use the AHCI mode. Let the users know diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 3e23e9941dad..dd4d6f74d7bd 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -34,10 +34,21 @@ enum { HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ }; +enum ahci_imx_type { + AHCI_IMX53, + AHCI_IMX6Q, +}; + struct imx_ahci_priv { struct platform_device *ahci_pdev; + enum ahci_imx_type type; + + /* i.MX53 clock */ + struct clk *sata_gate_clk; + /* Common clock */ struct clk *sata_ref_clk; struct clk *ahb_clk; + struct regmap *gpr; bool no_device; bool first_time; @@ -47,6 +58,59 @@ static int ahci_imx_hotplug; module_param_named(hotplug, ahci_imx_hotplug, int, 0644); MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)"); +static int imx_sata_clock_enable(struct device *dev) +{ + struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + int ret; + + if (imxpriv->type == AHCI_IMX53) { + ret = clk_prepare_enable(imxpriv->sata_gate_clk); + if (ret < 0) { + dev_err(dev, "prepare-enable sata_gate clock err:%d\n", + ret); + return ret; + } + } + + ret = clk_prepare_enable(imxpriv->sata_ref_clk); + if (ret < 0) { + dev_err(dev, "prepare-enable sata_ref clock err:%d\n", + ret); + goto clk_err; + } + + if (imxpriv->type == AHCI_IMX6Q) { + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_MPLL_CLK_EN, + IMX6Q_GPR13_SATA_MPLL_CLK_EN); + } + + usleep_range(1000, 2000); + + return 0; + +clk_err: + if (imxpriv->type == AHCI_IMX53) + clk_disable_unprepare(imxpriv->sata_gate_clk); + return ret; +} + +static void imx_sata_clock_disable(struct device *dev) +{ + struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + + if (imxpriv->type == AHCI_IMX6Q) { + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_MPLL_CLK_EN, + !IMX6Q_GPR13_SATA_MPLL_CLK_EN); + } + + clk_disable_unprepare(imxpriv->sata_ref_clk); + + if (imxpriv->type == AHCI_IMX53) + clk_disable_unprepare(imxpriv->sata_gate_clk); +} + static void ahci_imx_error_handler(struct ata_port *ap) { u32 reg_val; @@ -72,16 +136,29 @@ static void ahci_imx_error_handler(struct ata_port *ap) */ reg_val = readl(mmio + PORT_PHY_CTL); writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL); - regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, - IMX6Q_GPR13_SATA_MPLL_CLK_EN, - !IMX6Q_GPR13_SATA_MPLL_CLK_EN); - clk_disable_unprepare(imxpriv->sata_ref_clk); + imx_sata_clock_disable(ap->dev); imxpriv->no_device = true; } +static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent); + int ret = -EIO; + + if (imxpriv->type == AHCI_IMX53) + ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline); + else if (imxpriv->type == AHCI_IMX6Q) + ret = ahci_ops.softreset(link, class, deadline); + + return ret; +} + static struct ata_port_operations ahci_imx_ops = { .inherits = &ahci_platform_ops, .error_handler = ahci_imx_error_handler, + .softreset = ahci_imx_softreset, }; static const struct ata_port_info ahci_imx_port_info = { @@ -91,52 +168,15 @@ static const struct ata_port_info ahci_imx_port_info = { .port_ops = &ahci_imx_ops, }; -static int imx6q_sata_init(struct device *dev, void __iomem *mmio) +static int imx_sata_init(struct device *dev, void __iomem *mmio) { int ret = 0; unsigned int reg_val; struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - imxpriv->gpr = - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); - if (IS_ERR(imxpriv->gpr)) { - dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n"); - return PTR_ERR(imxpriv->gpr); - } - - ret = clk_prepare_enable(imxpriv->sata_ref_clk); - if (ret < 0) { - dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret); + ret = imx_sata_clock_enable(dev); + if (ret < 0) return ret; - } - - /* - * set PHY Paremeters, two steps to configure the GPR13, - * one write for rest of parameters, mask of first write - * is 0x07ffffff, and the other one write for setting - * the mpll_clk_en. - */ - regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK - | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK - | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK - | IMX6Q_GPR13_SATA_SPD_MODE_MASK - | IMX6Q_GPR13_SATA_MPLL_SS_EN - | IMX6Q_GPR13_SATA_TX_ATTEN_MASK - | IMX6Q_GPR13_SATA_TX_BOOST_MASK - | IMX6Q_GPR13_SATA_TX_LVL_MASK - | IMX6Q_GPR13_SATA_MPLL_CLK_EN - | IMX6Q_GPR13_SATA_TX_EDGE_RATE - , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB - | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M - | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F - | IMX6Q_GPR13_SATA_SPD_MODE_3P0G - | IMX6Q_GPR13_SATA_MPLL_SS_EN - | IMX6Q_GPR13_SATA_TX_ATTEN_9_16 - | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB - | IMX6Q_GPR13_SATA_TX_LVL_1_025_V); - regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, - IMX6Q_GPR13_SATA_MPLL_CLK_EN); - usleep_range(100, 200); /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, @@ -162,13 +202,9 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) return 0; } -static void imx6q_sata_exit(struct device *dev) +static void imx_sata_exit(struct device *dev) { - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - - regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, - !IMX6Q_GPR13_SATA_MPLL_CLK_EN); - clk_disable_unprepare(imxpriv->sata_ref_clk); + imx_sata_clock_disable(dev); } static int imx_ahci_suspend(struct device *dev) @@ -179,12 +215,8 @@ static int imx_ahci_suspend(struct device *dev) * If no_device is set, The CLKs had been gated off in the * initialization so don't do it again here. */ - if (!imxpriv->no_device) { - regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, - IMX6Q_GPR13_SATA_MPLL_CLK_EN, - !IMX6Q_GPR13_SATA_MPLL_CLK_EN); - clk_disable_unprepare(imxpriv->sata_ref_clk); - } + if (!imxpriv->no_device) + imx_sata_clock_disable(dev); return 0; } @@ -192,34 +224,26 @@ static int imx_ahci_suspend(struct device *dev) static int imx_ahci_resume(struct device *dev) { struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - int ret; - - if (!imxpriv->no_device) { - ret = clk_prepare_enable(imxpriv->sata_ref_clk); - if (ret < 0) { - dev_err(dev, "pre-enable sata_ref clock err:%d\n", ret); - return ret; - } + int ret = 0; - regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, - IMX6Q_GPR13_SATA_MPLL_CLK_EN, - IMX6Q_GPR13_SATA_MPLL_CLK_EN); - usleep_range(1000, 2000); - } + if (!imxpriv->no_device) + ret = imx_sata_clock_enable(dev); - return 0; + return ret; } -static struct ahci_platform_data imx6q_sata_pdata = { - .init = imx6q_sata_init, - .exit = imx6q_sata_exit, - .ata_port_info = &ahci_imx_port_info, - .suspend = imx_ahci_suspend, - .resume = imx_ahci_resume, +static struct ahci_platform_data imx_sata_pdata = { + .init = imx_sata_init, + .exit = imx_sata_exit, + .ata_port_info = &ahci_imx_port_info, + .suspend = imx_ahci_suspend, + .resume = imx_ahci_resume, + }; static const struct of_device_id imx_ahci_of_match[] = { - { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata}, + { .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 }, + { .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q }, {}, }; MODULE_DEVICE_TABLE(of, imx_ahci_of_match); @@ -229,12 +253,20 @@ static int imx_ahci_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *mem, *irq, res[2]; const struct of_device_id *of_id; + enum ahci_imx_type type; const struct ahci_platform_data *pdata = NULL; struct imx_ahci_priv *imxpriv; struct device *ahci_dev; struct platform_device *ahci_pdev; int ret; + of_id = of_match_device(imx_ahci_of_match, dev); + if (!of_id) + return -EINVAL; + + type = (enum ahci_imx_type)of_id->data; + pdata = &imx_sata_pdata; + imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); if (!imxpriv) { dev_err(dev, "can't alloc ahci_host_priv\n"); @@ -250,6 +282,8 @@ static int imx_ahci_probe(struct platform_device *pdev) imxpriv->no_device = false; imxpriv->first_time = true; + imxpriv->type = type; + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); if (IS_ERR(imxpriv->ahb_clk)) { dev_err(dev, "can't get ahb clock.\n"); @@ -257,6 +291,15 @@ static int imx_ahci_probe(struct platform_device *pdev) goto err_out; } + if (type == AHCI_IMX53) { + imxpriv->sata_gate_clk = devm_clk_get(dev, "sata_gate"); + if (IS_ERR(imxpriv->sata_gate_clk)) { + dev_err(dev, "can't get sata_gate clock.\n"); + ret = PTR_ERR(imxpriv->sata_gate_clk); + goto err_out; + } + } + imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); if (IS_ERR(imxpriv->sata_ref_clk)) { dev_err(dev, "can't get sata_ref clock.\n"); @@ -267,14 +310,6 @@ static int imx_ahci_probe(struct platform_device *pdev) imxpriv->ahci_pdev = ahci_pdev; platform_set_drvdata(pdev, imxpriv); - of_id = of_match_device(imx_ahci_of_match, dev); - if (of_id) { - pdata = of_id->data; - } else { - ret = -EINVAL; - goto err_out; - } - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!mem || !irq) { @@ -290,6 +325,43 @@ static int imx_ahci_probe(struct platform_device *pdev) ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask; ahci_dev->of_node = dev->of_node; + if (type == AHCI_IMX6Q) { + imxpriv->gpr = syscon_regmap_lookup_by_compatible( + "fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imxpriv->gpr)) { + dev_err(dev, + "failed to find fsl,imx6q-iomux-gpr regmap\n"); + ret = PTR_ERR(imxpriv->gpr); + goto err_out; + } + + /* + * Set PHY Paremeters, two steps to configure the GPR13, + * one write for rest of parameters, mask of first write + * is 0x07fffffe, and the other one write for setting + * the mpll_clk_en happens in imx_sata_clock_enable(). + */ + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | + IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | + IMX6Q_GPR13_SATA_SPD_MODE_MASK | + IMX6Q_GPR13_SATA_MPLL_SS_EN | + IMX6Q_GPR13_SATA_TX_ATTEN_MASK | + IMX6Q_GPR13_SATA_TX_BOOST_MASK | + IMX6Q_GPR13_SATA_TX_LVL_MASK | + IMX6Q_GPR13_SATA_MPLL_CLK_EN | + IMX6Q_GPR13_SATA_TX_EDGE_RATE, + IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | + IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | + IMX6Q_GPR13_SATA_SPD_MODE_3P0G | + IMX6Q_GPR13_SATA_MPLL_SS_EN | + IMX6Q_GPR13_SATA_TX_ATTEN_9_16 | + IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB | + IMX6Q_GPR13_SATA_TX_LVL_1_025_V); + } + ret = platform_device_add_resources(ahci_pdev, res, 2); if (ret) goto err_out; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index f8f38a08abc5..7d196656adb5 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -221,13 +221,6 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), .driver_data = ATA_GEN_FORCE_DMA }, - /* - * For some reason, MCP89 on MacBook 7,1 doesn't work with - * ahci, use ata_generic instead. - */ - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA, - PCI_VENDOR_ID_APPLE, 0xcb89, - .driver_data = ATA_GEN_FORCE_DMA }, #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE) { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index c482f8cadd7a..36605abe5a67 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1764,7 +1764,7 @@ static void ahci_handle_port_interrupt(struct ata_port *ap, } } -void ahci_port_intr(struct ata_port *ap) +static void ahci_port_intr(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 status; @@ -1797,7 +1797,7 @@ irqreturn_t ahci_thread_fn(int irq, void *dev_instance) } EXPORT_SYMBOL_GPL(ahci_thread_fn); -void ahci_hw_port_interrupt(struct ata_port *ap) +static void ahci_hw_port_interrupt(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ahci_port_priv *pp = ap->private_data; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1393a5890ed5..1a3dbd1b196e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2222,6 +2222,16 @@ int ata_dev_configure(struct ata_device *dev) if (rc) return rc; + /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ + if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) && + (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) + dev->horkage |= ATA_HORKAGE_NOLPM; + + if (dev->horkage & ATA_HORKAGE_NOLPM) { + ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); + dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; + } + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -4216,6 +4226,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + /* + * Some WD SATA-I drives spin up and down erratically when the link + * is put into the slumber mode. We don't have full list of the + * affected devices. Disable LPM if the device matches one of the + * known prefixes and is SATA-1. As a side effect LPM partial is + * lost too. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=57211 + */ + { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + /* End Marker */ { } }; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 92d7797223be..6d8757008318 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2402,7 +2402,7 @@ static void ata_eh_link_report(struct ata_link *link) struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; const char *frozen, *desc; - char tries_buf[6]; + char tries_buf[6] = ""; int tag, nr_failed = 0; if (ehc->i.flags & ATA_EHI_QUIET) @@ -2433,9 +2433,8 @@ static void ata_eh_link_report(struct ata_link *link) if (ap->pflags & ATA_PFLAG_FROZEN) frozen = " frozen"; - memset(tries_buf, 0, sizeof(tries_buf)); if (ap->eh_tries < ATA_EH_MAX_TRIES) - snprintf(tries_buf, sizeof(tries_buf) - 1, " t%d", + snprintf(tries_buf, sizeof(tries_buf), " t%d", ap->eh_tries); if (ehc->i.dev) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 377eb889f555..ef8567de6a75 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -111,12 +111,14 @@ static const char *ata_lpm_policy_names[] = { [ATA_LPM_MIN_POWER] = "min_power", }; -static ssize_t ata_scsi_lpm_store(struct device *dev, +static ssize_t ata_scsi_lpm_store(struct device *device, struct device_attribute *attr, const char *buf, size_t count) { - struct Scsi_Host *shost = class_to_shost(dev); + struct Scsi_Host *shost = class_to_shost(device); struct ata_port *ap = ata_shost_to_port(shost); + struct ata_link *link; + struct ata_device *dev; enum ata_lpm_policy policy; unsigned long flags; @@ -132,10 +134,20 @@ static ssize_t ata_scsi_lpm_store(struct device *dev, return -EINVAL; spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, &ap->link, ENABLED) { + if (dev->horkage & ATA_HORKAGE_NOLPM) { + count = -EOPNOTSUPP; + goto out_unlock; + } + } + } + ap->target_lpm_policy = policy; ata_port_schedule_eh(ap); +out_unlock: spin_unlock_irqrestore(ap->lock, flags); - return count; } diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index 898e544a7ae8..a79566d05666 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -24,11 +24,34 @@ #include <linux/slab.h> #include <linux/platform_data/ata-samsung_cf.h> -#include <plat/regs-ata.h> #define DRV_NAME "pata_samsung_cf" #define DRV_VERSION "0.1" +#define S3C_CFATA_REG(x) (x) +#define S3C_CFATA_MUX S3C_CFATA_REG(0x0) +#define S3C_ATA_CTRL S3C_CFATA_REG(0x0) +#define S3C_ATA_CMD S3C_CFATA_REG(0x8) +#define S3C_ATA_IRQ S3C_CFATA_REG(0x10) +#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14) +#define S3C_ATA_CFG S3C_CFATA_REG(0x18) + +#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c) +#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54) +#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58) +#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c) +#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60) +#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64) +#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68) +#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c) +#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70) +#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74) +#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c) + +#define S3C_CFATA_MUX_TRUEIDE 0x01 +#define S3C_ATA_CFG_SWAP 0x40 +#define S3C_ATA_CFG_IORDYEN 0x02 + enum s3c_cpu_type { TYPE_S3C64XX, TYPE_S5PC100, @@ -495,22 +518,10 @@ static int __init pata_s3c_probe(struct platform_device *pdev) info->irq = platform_get_irq(pdev, 0); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(dev, "failed to get mem resource\n"); - return -EINVAL; - } - - if (!devm_request_mem_region(dev, res->start, - resource_size(res), DRV_NAME)) { - dev_err(dev, "error requesting register region\n"); - return -EBUSY; - } - info->ide_addr = devm_ioremap(dev, res->start, resource_size(res)); - if (!info->ide_addr) { - dev_err(dev, "failed to map IO base address\n"); - return -ENOMEM; - } + info->ide_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(info->ide_addr)) + return PTR_ERR(info->ide_addr); info->clk = devm_clk_get(&pdev->dev, "cfcon"); if (IS_ERR(info->clk)) { diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index ea3b3dc10f33..870b11eadc6d 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -29,7 +29,6 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/libata.h> -#include <linux/ahci_platform.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/export.h> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 56be31819897..20a7517bd339 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -60,6 +60,7 @@ #include <linux/dma-mapping.h> #include <linux/device.h> #include <linux/clk.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/mbus.h> @@ -304,6 +305,7 @@ enum { MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, SATA_IFCFG = 0x050, + LP_PHY_CTL = 0x058, MV_M2_PREAMP_MASK = 0x7e0, @@ -431,6 +433,7 @@ enum { MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ + MV_HP_FIX_LP_PHY_CTL = (1 << 13), /* fix speed in LP_PHY_CTL ? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -563,6 +566,12 @@ struct mv_host_priv { struct clk *clk; struct clk **port_clks; /* + * Some devices have a SATA PHY which can be enabled/disabled + * in order to save power. These are optional: if the platform + * devices does not have any phy, they won't be used. + */ + struct phy **port_phys; + /* * These consistent DMA memory pools give us guaranteed * alignment for hardware-accessed data structures, * and less memory waste in accomplishing the alignment. @@ -1358,6 +1367,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) if (ofs != 0xffffffffU) { void __iomem *addr = mv_ap_base(link->ap) + ofs; + struct mv_host_priv *hpriv = link->ap->host->private_data; if (sc_reg_in == SCR_CONTROL) { /* * Workaround for 88SX60x1 FEr SATA#26: @@ -1374,6 +1384,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) */ if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) val |= 0xf000; + + if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) { + void __iomem *lp_phy_addr = + mv_ap_base(link->ap) + LP_PHY_CTL; + /* + * Set PHY speed according to SControl speed. + */ + if ((val & 0xf0) == 0x10) + writelfl(0x7, lp_phy_addr); + else + writelfl(0x227, lp_phy_addr); + } } writelfl(val, addr); return 0; @@ -4076,6 +4098,11 @@ static int mv_platform_probe(struct platform_device *pdev) GFP_KERNEL); if (!hpriv->port_clks) return -ENOMEM; + hpriv->port_phys = devm_kzalloc(&pdev->dev, + sizeof(struct phy *) * n_ports, + GFP_KERNEL); + if (!hpriv->port_phys) + return -ENOMEM; host->private_data = hpriv; hpriv->n_ports = n_ports; hpriv->board_idx = chip_soc; @@ -4097,6 +4124,17 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->port_clks[port] = clk_get(&pdev->dev, port_number); if (!IS_ERR(hpriv->port_clks[port])) clk_prepare_enable(hpriv->port_clks[port]); + + sprintf(port_number, "port%d", port); + hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number); + if (IS_ERR(hpriv->port_phys[port])) { + rc = PTR_ERR(hpriv->port_phys[port]); + hpriv->port_phys[port] = NULL; + if ((rc != -EPROBE_DEFER) && (rc != -ENODEV)) + dev_warn(&pdev->dev, "error getting phy"); + goto err; + } else + phy_power_on(hpriv->port_phys[port]); } /* @@ -4110,6 +4148,15 @@ static int mv_platform_probe(struct platform_device *pdev) if (rc) goto err; + /* + * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be + * updated in the LP_PHY_CTL register. + */ + if (pdev->dev.of_node && + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-370-sata")) + hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL; + /* initialize adapter */ rc = mv_init_host(host); if (rc) @@ -4132,6 +4179,8 @@ err: clk_disable_unprepare(hpriv->port_clks[port]); clk_put(hpriv->port_clks[port]); } + if (hpriv->port_phys[port]) + phy_power_off(hpriv->port_phys[port]); } return rc; @@ -4161,6 +4210,8 @@ static int mv_platform_remove(struct platform_device *pdev) clk_disable_unprepare(hpriv->port_clks[port]); clk_put(hpriv->port_clks[port]); } + if (hpriv->port_phys[port]) + phy_power_off(hpriv->port_phys[port]); } return 0; } @@ -4209,6 +4260,7 @@ static int mv_platform_resume(struct platform_device *pdev) #ifdef CONFIG_OF static struct of_device_id mv_sata_dt_ids[] = { + { .compatible = "marvell,armada-370-sata", }, { .compatible = "marvell,orion-sata", }, {}, }; diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 1dae9a9009f7..2b25bd83fc9d 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/ata.h> #include <linux/libata.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/err.h> @@ -123,12 +124,37 @@ #define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL +/* Gen2 Physical Layer Control Registers */ +#define RCAR_GEN2_PHY_CTL1_REG 0x1704 +#define RCAR_GEN2_PHY_CTL1 0x34180002 +#define RCAR_GEN2_PHY_CTL1_SS 0xC180 /* Spread Spectrum */ + +#define RCAR_GEN2_PHY_CTL2_REG 0x170C +#define RCAR_GEN2_PHY_CTL2 0x00002303 + +#define RCAR_GEN2_PHY_CTL3_REG 0x171C +#define RCAR_GEN2_PHY_CTL3 0x000B0194 + +#define RCAR_GEN2_PHY_CTL4_REG 0x1724 +#define RCAR_GEN2_PHY_CTL4 0x00030994 + +#define RCAR_GEN2_PHY_CTL5_REG 0x1740 +#define RCAR_GEN2_PHY_CTL5 0x03004001 +#define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */ +#define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */ + +enum sata_rcar_type { + RCAR_GEN1_SATA, + RCAR_GEN2_SATA, +}; + struct sata_rcar_priv { void __iomem *base; struct clk *clk; + enum sata_rcar_type type; }; -static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv) +static void sata_rcar_gen1_phy_preinit(struct sata_rcar_priv *priv) { void __iomem *base = priv->base; @@ -141,8 +167,8 @@ static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv) iowrite32(0, base + SATAPHYRESET_REG); } -static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val, - int group) +static void sata_rcar_gen1_phy_write(struct sata_rcar_priv *priv, u16 reg, + u32 val, int group) { void __iomem *base = priv->base; int timeout; @@ -170,6 +196,29 @@ static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val, iowrite32(0, base + SATAPHYADDR_REG); } +static void sata_rcar_gen1_phy_init(struct sata_rcar_priv *priv) +{ + sata_rcar_gen1_phy_preinit(priv); + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1); + sata_rcar_gen1_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0); + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1); + sata_rcar_gen1_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0); +} + +static void sata_rcar_gen2_phy_init(struct sata_rcar_priv *priv) +{ + void __iomem *base = priv->base; + + iowrite32(RCAR_GEN2_PHY_CTL1, base + RCAR_GEN2_PHY_CTL1_REG); + iowrite32(RCAR_GEN2_PHY_CTL2, base + RCAR_GEN2_PHY_CTL2_REG); + iowrite32(RCAR_GEN2_PHY_CTL3, base + RCAR_GEN2_PHY_CTL3_REG); + iowrite32(RCAR_GEN2_PHY_CTL4, base + RCAR_GEN2_PHY_CTL4_REG); + iowrite32(RCAR_GEN2_PHY_CTL5 | RCAR_GEN2_PHY_CTL5_DC | + RCAR_GEN2_PHY_CTL5_TR, base + RCAR_GEN2_PHY_CTL5_REG); +} + static void sata_rcar_freeze(struct ata_port *ap) { struct sata_rcar_priv *priv = ap->host->private_data; @@ -738,13 +787,17 @@ static void sata_rcar_init_controller(struct ata_host *host) u32 val; /* reset and setup phy */ - sata_rcar_phy_initialize(priv); - sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0); - sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1); - sata_rcar_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0); - sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0); - sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1); - sata_rcar_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0); + switch (priv->type) { + case RCAR_GEN1_SATA: + sata_rcar_gen1_phy_init(priv); + break; + case RCAR_GEN2_SATA: + sata_rcar_gen2_phy_init(priv); + break; + default: + dev_warn(host->dev, "SATA phy is not initialized\n"); + break; + } /* SATA-IP reset state */ val = ioread32(base + ATAPI_CONTROL1_REG); @@ -770,8 +823,40 @@ static void sata_rcar_init_controller(struct ata_host *host) iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG); } +static struct of_device_id sata_rcar_match[] = { + { + /* Deprecated by "renesas,sata-r8a7779" */ + .compatible = "renesas,rcar-sata", + .data = (void *)RCAR_GEN1_SATA, + }, + { + .compatible = "renesas,sata-r8a7779", + .data = (void *)RCAR_GEN1_SATA, + }, + { + .compatible = "renesas,sata-r8a7790", + .data = (void *)RCAR_GEN2_SATA + }, + { + .compatible = "renesas,sata-r8a7791", + .data = (void *)RCAR_GEN2_SATA + }, + { }, +}; +MODULE_DEVICE_TABLE(of, sata_rcar_match); + +static const struct platform_device_id sata_rcar_id_table[] = { + { "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */ + { "sata-r8a7779", RCAR_GEN1_SATA }, + { "sata-r8a7790", RCAR_GEN2_SATA }, + { "sata-r8a7791", RCAR_GEN2_SATA }, + { }, +}; +MODULE_DEVICE_TABLE(platform, sata_rcar_id_table); + static int sata_rcar_probe(struct platform_device *pdev) { + const struct of_device_id *of_id; struct ata_host *host; struct sata_rcar_priv *priv; struct resource *mem; @@ -787,6 +872,12 @@ static int sata_rcar_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + of_id = of_match_device(sata_rcar_match, &pdev->dev); + if (of_id) + priv->type = (enum sata_rcar_type)of_id->data; + else + priv->type = platform_get_device_id(pdev)->driver_data; + priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "failed to get access to sata clock\n"); @@ -892,15 +983,10 @@ static const struct dev_pm_ops sata_rcar_pm_ops = { }; #endif -static struct of_device_id sata_rcar_match[] = { - { .compatible = "renesas,rcar-sata", }, - {}, -}; -MODULE_DEVICE_TABLE(of, sata_rcar_match); - static struct platform_driver sata_rcar_driver = { .probe = sata_rcar_probe, .remove = sata_rcar_remove, + .id_table = sata_rcar_id_table, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/include/linux/libata.h b/include/linux/libata.h index 9b503376738f..bec6dbe939a0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -419,6 +419,8 @@ enum { ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */ ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */ ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */ + ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */ + ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ |
