diff options
65 files changed, 12770 insertions, 119 deletions
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x new file mode 100644 index 000000000000..24f47d8f6a42 --- /dev/null +++ b/Documentation/hwmon/wm831x @@ -0,0 +1,37 @@ +Kernel driver wm831x-hwmon +========================== + +Supported chips: + * Wolfson Microelectronics WM831x PMICs + Prefix: 'wm831x' + Datasheet: + http://www.wolfsonmicro.com/products/WM8310 + http://www.wolfsonmicro.com/products/WM8311 + http://www.wolfsonmicro.com/products/WM8312 + +Authors: Mark Brown <broonie@opensource.wolfsonmicro.com> + +Description +----------- + +The WM831x series of PMICs include an AUXADC which can be used to +monitor a range of system operating parameters, including the voltages +of the major supplies within the system. Currently the driver provides +reporting of all the input values but does not provide any alarms. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465 +times the ADC value. + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures +are available. The chip temperature is calculated as: + + Degrees celsius = (512.18 - data) / 1.0983 + +while the battery temperature calculation will depend on the NTC +thermistor component. diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350 new file mode 100644 index 000000000000..98f923bd2e92 --- /dev/null +++ b/Documentation/hwmon/wm8350 @@ -0,0 +1,26 @@ +Kernel driver wm8350-hwmon +========================== + +Supported chips: + * Wolfson Microelectronics WM835x PMICs + Prefix: 'wm8350' + Datasheet: + http://www.wolfsonmicro.com/products/WM8350 + http://www.wolfsonmicro.com/products/WM8351 + http://www.wolfsonmicro.com/products/WM8352 + +Authors: Mark Brown <broonie@opensource.wolfsonmicro.com> + +Description +----------- + +The WM835x series of PMICs include an AUXADC which can be used to +monitor a range of system operating parameters, including the voltages +of the major supplies within the system. Currently the driver provides +simple access to these major supplies. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC +is referenced to the system VRTC. diff --git a/MAINTAINERS b/MAINTAINERS index e2b9486fd1a9..bd3f026dbe61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5683,6 +5683,26 @@ S: Supported F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h +WOLFSON MICROELECTRONICS PMIC DRIVERS +P: Mark Brown +M: broonie@opensource.wolfsonmicro.com +L: linux-kernel@vger.kernel.org +T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus +W: http://opensource.wolfsonmicro.com/node/8 +S: Supported +F: drivers/leds/leds-wm83*.c +F: drivers/mfd/wm8*.c +F: drivers/power/wm83*.c +F: drivers/rtc/rtc-wm83*.c +F: drivers/regulator/wm8*.c +F: drivers/video/backlight/wm83*_bl.c +F: drivers/watchdog/wm83*_wdt.c +F: include/linux/mfd/wm831x/ +F: include/linux/mfd/wm8350/ +F: include/linux/mfd/wm8400/ +F: sound/soc/codecs/wm8350.c +F: sound/soc/codecs/wm8400.c + X.25 NETWORK LAYER M: Henner Eisen <eis@baty.hanse.de> L: linux-x25@vger.kernel.org diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 56d931a425f7..e70baa799018 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51-flash.c + * linux/arch/arm/mach-omap2/board-rx51-peripherals.c * * Copyright (C) 2008-2009 Nokia * @@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_platform_data rx51_twldata = { +static struct twl4030_ins sleep_on_seq[] __initdata = { +/* + * Turn off VDD1 and VDD2. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4}, + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2}, +/* + * And also turn off the OMAP3 PLLs and the sysclk output. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3}, + {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3}, +}; + +static struct twl4030_script sleep_on_script __initdata = { + .script = sleep_on_seq, + .size = ARRAY_SIZE(sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +static struct twl4030_ins wakeup_seq[] __initdata = { +/* + * Reenable the OMAP3 PLLs. + * Wakeup VDD1 and VDD2. + * Reenable sysclk output. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30}, + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30}, + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37}, + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3}, +}; + +static struct twl4030_script wakeup_script __initdata = { + .script = wakeup_seq, + .size = ARRAY_SIZE(wakeup_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +static struct twl4030_ins wakeup_p3_seq[] __initdata = { +/* + * Wakeup VDD1 (dummy to be able to insert a delay) + * Enable CLKEN + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3}, +}; + +static struct twl4030_script wakeup_p3_script __initdata = { + .script = wakeup_p3_seq, + .size = ARRAY_SIZE(wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_ins wrst_seq[] __initdata = { +/* + * Reset twl4030. + * Reset VDD1 regulator. + * Reset VDD2 regulator. + * Reset VPLL1 regulator. + * Enable sysclk output. + * Reenable twl4030. + */ + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), + 0x13}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, + {MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wrst_script __initdata = { + .script = wrst_seq, + .size = ARRAY_SIZE(wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *twl4030_scripts[] __initdata = { + /* wakeup12 script should be loaded before sleep script, otherwise a + board might hit retention before loading of wakeup script is + completed. This can cause boot failures depending on timing issues. + */ + &wakeup_script, + &sleep_on_script, + &wakeup_p3_script, + &wrst_script, +}; + +static struct twl4030_resconfig twl4030_rconfig[] __initdata = { + { .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1, + .type2 = 3}, + { .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1, + .type2 = 3}, + { .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1, + .type2 = 1 }, + { 0, 0}, +}; + +static struct twl4030_power_data rx51_t2scripts_data __initdata = { + .scripts = twl4030_scripts, + .num = ARRAY_SIZE(twl4030_scripts), + .resource_config = twl4030_rconfig, +}; + + + +static struct twl4030_platform_data rx51_twldata __initdata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = { .keypad = &rx51_kp_data, .madc = &rx51_madc_data, .usb = &rx51_usb_data, + .power = &rx51_t2scripts_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 96dda81c9228..6b4c484a699a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -155,6 +155,13 @@ config GPIO_TWL4030 Say yes here to access the GPIO signals of various multi-function power management chips from Texas Instruments. +config GPIO_WM831X + tristate "WM831x GPIOs" + depends on MFD_WM831X + help + Say yes here to access the GPIO signals of WM831x power management + chips from Wolfson Microelectronics. + comment "PCI GPIO expanders:" config GPIO_BT8XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9244c6fcd8be..ea7c745f26a8 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o +obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c new file mode 100644 index 000000000000..f9c09a54ec7f --- /dev/null +++ b/drivers/gpio/wm831x-gpio.c @@ -0,0 +1,252 @@ +/* + * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/gpio.h> + +#define WM831X_GPIO_MAX 16 + +struct wm831x_gpio { + struct wm831x *wm831x; + struct gpio_chip gpio_chip; +}; + +static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct wm831x_gpio, gpio_chip); +} + +static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI, + WM831X_GPN_DIR); +} + +static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL); + if (ret < 0) + return ret; + + if (ret & 1 << offset) + return 1; + else + return 0; +} + +static int wm831x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, + WM831X_GPN_DIR | WM831X_GPN_TRI, 0); +} + +static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + + wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset, + value << offset); +} + +#ifdef CONFIG_DEBUG_FS +static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int i; + + for (i = 0; i < chip->ngpio; i++) { + int gpio = i + chip->base; + int reg; + const char *label, *pull, *powerdomain; + + /* We report the GPIO even if it's not requested since + * we're also reporting things like alternate + * functions which apply even when the GPIO is not in + * use as a GPIO. + */ + label = gpiochip_is_requested(chip, i); + if (!label) + label = "Unrequested"; + + seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); + + reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i); + if (reg < 0) { + dev_err(wm831x->dev, + "GPIO control %d read failed: %d\n", + gpio, reg); + seq_printf(s, "\n"); + continue; + } + + switch (reg & WM831X_GPN_PULL_MASK) { + case WM831X_GPIO_PULL_NONE: + pull = "nopull"; + break; + case WM831X_GPIO_PULL_DOWN: + pull = "pulldown"; + break; + case WM831X_GPIO_PULL_UP: + pull = "pullup"; + default: + pull = "INVALID PULL"; + break; + } + + switch (i + 1) { + case 1 ... 3: + case 7 ... 9: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "VPMIC"; + else + powerdomain = "DBVDD"; + break; + + case 4 ... 6: + case 10 ... 12: + if (reg & WM831X_GPN_PWR_DOM) + powerdomain = "SYSVDD"; + else + powerdomain = "DBVDD"; + break; + + case 13 ... 16: + powerdomain = "TPVDD"; + break; + + default: + BUG(); + break; + } + + seq_printf(s, " %s %s %s %s%s\n" + " %s%s (0x%4x)\n", + reg & WM831X_GPN_DIR ? "in" : "out", + wm831x_gpio_get(chip, i) ? "high" : "low", + pull, + powerdomain, + reg & WM831X_GPN_POL ? " inverted" : "", + reg & WM831X_GPN_OD ? "open-drain" : "CMOS", + reg & WM831X_GPN_TRI ? " tristated" : "", + reg); + } +} +#else +#define wm831x_gpio_dbg_show NULL +#endif + +static struct gpio_chip template_chip = { + .label = "wm831x", + .owner = THIS_MODULE, + .direction_input = wm831x_gpio_direction_in, + .get = wm831x_gpio_get, + .direction_output = wm831x_gpio_direction_out, + .set = wm831x_gpio_set, + .dbg_show = wm831x_gpio_dbg_show, + .can_sleep = 1, +}; + +static int __devinit wm831x_gpio_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + struct wm831x_gpio *wm831x_gpio; + int ret; + + wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL); + if (wm831x_gpio == NULL) + return -ENOMEM; + + wm831x_gpio->wm831x = wm831x; + wm831x_gpio->gpio_chip = template_chip; + wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX; + wm831x_gpio->gpio_chip.dev = &pdev->dev; + if (pdata && pdata->gpio_base) + wm831x_gpio->gpio_chip.base = pdata->gpio_base; + else + wm831x_gpio->gpio_chip.base = -1; + + ret = gpiochip_add(&wm831x_gpio->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", + ret); + goto err; + } + + platform_set_drvdata(pdev, wm831x_gpio); + + return ret; + +err: + kfree(wm831x_gpio); + return ret; +} + +static int __devexit wm831x_gpio_remove(struct platform_device *pdev) +{ + struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&wm831x_gpio->gpio_chip); + if (ret == 0) + kfree(wm831x_gpio); + + return ret; +} + +static struct platform_driver wm831x_gpio_driver = { + .driver.name = "wm831x-gpio", + .driver.owner = THIS_MODULE, + .probe = wm831x_gpio_probe, + .remove = __devexit_p(wm831x_gpio_remove), +}; + +static int __init wm831x_gpio_init(void) +{ + return platform_driver_register(&wm831x_gpio_driver); +} +subsys_initcall(wm831x_gpio_init); + +static void __exit wm831x_gpio_exit(void) +{ + platform_driver_unregister(&wm831x_gpio_driver); +} +module_exit(wm831x_gpio_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("GPIO interface for WM831x PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-gpio"); diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 461abb1e273a..ed7711d11ae8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -946,6 +946,27 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + config SENSORS_ULTRA45 tristate "Sun Ultra45 PIC16F747" depends on SPARC64 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 2e547881bc0a..bcf73a9bb619 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -93,6 +93,8 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o +obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c new file mode 100644 index 000000000000..c16e9e74c356 --- /dev/null +++ b/drivers/hwmon/wm831x-hwmon.c @@ -0,0 +1,226 @@ +/* + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/auxadc.h> + +struct wm831x_hwmon { + struct wm831x *wm831x; + struct device *classdev; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm831x\n"); +} + +static const char *input_names[] = { + [WM831X_AUX_SYSVDD] = "SYSVDD", + [WM831X_AUX_USB] = "USB", + [WM831X_AUX_BKUP_BATT] = "Backup battery", + [WM831X_AUX_BATT] = "Battery", + [WM831X_AUX_WALL] = "WALL", + [WM831X_AUX_CHIP_TEMP] = "PMIC", + [WM831X_AUX_BATT_TEMP] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000)); +} + +static ssize_t show_chip_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + /* Degrees celsius = (512.18-ret) / 1.0983 */ + ret = 512180 - (ret * 1000); + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983); + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM831X_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \ + NULL, name) + +#define WM831X_NAMED_VOLTAGE(id, name) \ + WM831X_VOLTAGE(id, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM831X_VOLTAGE(0, WM831X_AUX_AUX1); +WM831X_VOLTAGE(1, WM831X_AUX_AUX2); +WM831X_VOLTAGE(2, WM831X_AUX_AUX3); +WM831X_VOLTAGE(3, WM831X_AUX_AUX4); + +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD); +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB); +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT); +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL); +WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL, + WM831X_AUX_CHIP_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + WM831X_AUX_CHIP_TEMP); +/* Report as a voltage since conversion depends on external components + * and that's what the ABI wants. */ +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL, + WM831X_AUX_BATT_TEMP); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + WM831X_AUX_BATT_TEMP); + +static struct attribute *wm831x_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + + NULL +}; + +static const struct attribute_group wm831x_attr_group = { + .attrs = wm831x_attributes, +}; + +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_hwmon *hwmon; + int ret; + + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->wm831x = wm831x; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group); + if (ret) + goto err; + + hwmon->classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->classdev)) { + ret = PTR_ERR(hwmon->classdev); + goto err_sysfs; + } + + platform_set_drvdata(pdev, hwmon); + + return 0; + +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); +err: + kfree(hwmon); + return ret; +} + +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev) +{ + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev); + + hwmon_device_unregister(hwmon->classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + + return 0; +} + +static struct platform_driver wm831x_hwmon_driver = { + .probe = wm831x_hwmon_probe, + .remove = __devexit_p(wm831x_hwmon_remove), + .driver = { + .name = "wm831x-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_hwmon_init(void) +{ + return platform_driver_register(&wm831x_hwmon_driver); +} +module_init(wm831x_hwmon_init); + +static void __exit wm831x_hwmon_exit(void) +{ + platform_driver_unregister(&wm831x_hwmon_driver); +} +module_exit(wm831x_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-hwmon"); diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c new file mode 100644 index 000000000000..13290595ca86 --- /dev/null +++ b/drivers/hwmon/wm8350-hwmon.c @@ -0,0 +1,151 @@ +/* + * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/comparator.h> + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm8350\n"); +} + +static const char *input_names[] = { + [WM8350_AUXADC_USB] = "USB", + [WM8350_AUXADC_LINE] = "Line", + [WM8350_AUXADC_BATT] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int val; + + val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF; + val = DIV_ROUND_CLOSEST(val, 1000); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM8350_NAMED_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\ + NULL, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB); +WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT); +WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE); + +static struct attribute *wm8350_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group wm8350_attr_group = { + .attrs = wm8350_attributes, +}; + +static int __devinit wm8350_hwmon_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + int ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group); + if (ret) + goto err; + + wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(wm8350->hwmon.classdev)) { + ret = PTR_ERR(wm8350->hwmon.classdev); + goto err_group; + } + + return 0; + +err_group: + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); +err: + return ret; +} + +static int __devexit wm8350_hwmon_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + hwmon_device_unregister(wm8350->hwmon.classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); + + return 0; +} + +static struct platform_driver wm8350_hwmon_driver = { + .probe = wm8350_hwmon_probe, + .remove = __devexit_p(wm8350_hwmon_remove), + .driver = { + .name = "wm8350-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm8350_hwmon_init(void) +{ + return platform_driver_register(&wm8350_hwmon_driver); +} +module_init(wm8350_hwmon_init); + +static void __exit wm8350_hwmon_exit(void) +{ + platform_driver_unregister(&wm8350_hwmon_driver); +} +module_exit(wm8350_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-hwmon"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index cbe21bc96b52..1a50be379cbc 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -279,4 +279,24 @@ config INPUT_BFIN_ROTARY To compile this driver as a module, choose M here: the module will be called bfin-rotary. +config INPUT_WM831X_ON + tristate "WM831X ON pin" + depends on MFD_WM831X + help + Support the ON pin of WM831X PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called wm831x_on. + +config INPUT_PCAP + tristate "Motorola EZX PCAP misc input events" + depends on EZX_PCAP + help + Say Y here if you want to use Power key and Headphone button + on Motorola EZX phones. + + To compile this driver as a module, choose M here: the + module will be called pcap_keys. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 79c1e9a5ea31..bf4db626c313 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o +obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o @@ -26,4 +27,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o +obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o + diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c new file mode 100644 index 000000000000..7ea969347ca9 --- /dev/null +++ b/drivers/input/misc/pcap_keys.c @@ -0,0 +1,144 @@ +/* + * Input driver for PCAP events: + * * Power key + * * Headphone button + * + * Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_keys { + struct pcap_chip *pcap; + struct input_dev *input; +}; + +/* PCAP2 interrupts us on keypress */ +static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys) +{ + struct pcap_keys *pcap_keys = _pcap_keys; + int pirq = irq_to_pcap(pcap_keys->pcap, irq); + u32 pstat; + + ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat); + pstat &= 1 << pirq; + + switch (pirq) { + case PCAP_IRQ_ONOFF: + input_report_key(pcap_keys->input, KEY_POWER, !pstat); + break; + case PCAP_IRQ_MIC: + input_report_key(pcap_keys->input, KEY_HP, !pstat); + break; + } + + input_sync(pcap_keys->input); + + return IRQ_HANDLED; +} + +static int __devinit pcap_keys_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct pcap_keys *pcap_keys; + struct input_dev *input_dev; + + pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL); + if (!pcap_keys) + return err; + + pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + pcap_keys->input = input_dev; + + platform_set_drvdata(pdev, pcap_keys); + input_dev->name = pdev->name; + input_dev->phys = "pcap-keys/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(KEY_POWER, input_dev->keybit); + __set_bit(KEY_HP, input_dev->keybit); + + err = input_register_device(input_dev); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), + pcap_keys_handler, 0, "Power key", pcap_keys); + if (err) + goto fail_register; + + err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), + pcap_keys_handler, 0, "Headphone button", pcap_keys); + if (err) + goto fail_pwrkey; + + return 0; + +fail_pwrkey: + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_keys); + return err; +} + +static int __devexit pcap_keys_remove(struct platform_device *pdev) +{ + struct pcap_keys *pcap_keys = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys); + free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys); + + input_unregister_device(pcap_keys->input); + kfree(pcap_keys); + + return 0; +} + +static struct platform_driver pcap_keys_device_driver = { + .probe = pcap_keys_probe, + .remove = __devexit_p(pcap_keys_remove), + .driver = { + .name = "pcap-keys", + .owner = THIS_MODULE, + } +}; + +static int __init pcap_keys_init(void) +{ + return platform_driver_register(&pcap_keys_device_driver); +}; + +static void __exit pcap_keys_exit(void) +{ + platform_driver_unregister(&pcap_keys_device_driver); +}; + +module_init(pcap_keys_init); +module_exit(pcap_keys_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 input events driver"); +MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_keys"); diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c new file mode 100644 index 000000000000..ba4f5dd7c60e --- /dev/null +++ b/drivers/input/misc/wm831x-on.c @@ -0,0 +1,163 @@ +/** + * wm831x-on.c - WM831X ON pin driver + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/mfd/wm831x/core.h> + +struct wm831x_on { + struct input_dev *dev; + struct delayed_work work; + struct wm831x *wm831x; +}; + +/* + * The chip gives us an interrupt when the ON pin is asserted but we + * then need to poll to see when the pin is deasserted. + */ +static void wm831x_poll_on(struct work_struct *work) +{ + struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on, + work.work); + struct wm831x *wm831x = wm831x_on->wm831x; + int poll, ret; + + ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL); + if (ret >= 0) { + poll = !(ret & WM831X_ON_PIN_STS); + + input_report_key(wm831x_on->dev, KEY_POWER, poll); + input_sync(wm831x_on->dev); + } else { + dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret); + poll = 1; + } + + if (poll) + schedule_delayed_work(&wm831x_on->work, 100); +} + +static irqreturn_t wm831x_on_irq(int irq, void *data) +{ + struct wm831x_on *wm831x_on = data; + + schedule_delayed_work(&wm831x_on->work, 0); + + return IRQ_HANDLED; +} + +static int __devinit wm831x_on_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_on *wm831x_on; + int irq = platform_get_irq(pdev, 0); + int ret; + + wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL); + if (!wm831x_on) { + dev_err(&pdev->dev, "Can't allocate data\n"); + return -ENOMEM; + } + + wm831x_on->wm831x = wm831x; + INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on); + + wm831x_on->dev = input_allocate_device(); + if (!wm831x_on->dev) { + dev_err(&pdev->dev, "Can't allocate input dev\n"); + ret = -ENOMEM; + goto err; + } + + wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY); + wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + wm831x_on->dev->name = "wm831x_on"; + wm831x_on->dev->phys = "wm831x_on/input0"; + wm831x_on->dev->dev.parent = &pdev->dev; + + ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq, + IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret); + goto err_input_dev; + } + ret = input_register_device(wm831x_on->dev); + if (ret) { + dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret); + goto err_irq; + } + + platform_set_drvdata(pdev, wm831x_on); + + return 0; + +err_irq: + wm831x_free_irq(wm831x, irq, NULL); +err_input_dev: + input_free_device(wm831x_on->dev); +err: + kfree(wm831x_on); + return ret; +} + +static int __devexit wm831x_on_remove(struct platform_device *pdev) +{ + struct wm831x_on *wm831x_on = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on); + cancel_delayed_work_sync(&wm831x_on->work); + input_unregister_device(wm831x_on->dev); + kfree(wm831x_on); + + return 0; +} + +static struct platform_driver wm831x_on_driver = { + .probe = wm831x_on_probe, + .remove = __devexit_p(wm831x_on_remove), + .driver = { + .name = "wm831x-on", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_on_init(void) +{ + return platform_driver_register(&wm831x_on_driver); +} +module_init(wm831x_on_init); + +static void __exit wm831x_on_exit(void) +{ + platform_driver_unregister(&wm831x_on_driver); +} +module_exit(wm831x_on_exit); + +MODULE_ALIAS("platform:wm831x-on"); +MODULE_DESCRIPTION("WM831x ON pin"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); + diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 87a1ae63bcc4..ab02d72afbf3 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -510,4 +510,13 @@ config TOUCHSCREEN_W90X900 To compile this driver as a module, choose M here: the module will be called w90p910_ts. +config TOUCHSCREEN_PCAP + tristate "Motorola PCAP touchscreen" + depends on EZX_PCAP + help + Say Y here if you have a Motorola EZX telephone and + want to enable support for the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called pcap_ts. endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 3e1c5e0b952f..4599bf7ad819 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c new file mode 100644 index 000000000000..67fcd33595de --- /dev/null +++ b/drivers/input/touchscreen/pcap_ts.c @@ -0,0 +1,271 @@ +/* + * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform. + * + * Copyright (C) 2006 Harald Welte <laforge@openezx.org> + * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/pm.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/mfd/ezx-pcap.h> + +struct pcap_ts { + struct pcap_chip *pcap; + struct input_dev *input; + struct delayed_work work; + u16 x, y; + u16 pressure; + u8 read_state; +}; + +#define SAMPLE_DELAY 20 /* msecs */ + +#define X_AXIS_MIN 0 +#define X_AXIS_MAX 1023 +#define Y_AXIS_MAX X_AXIS_MAX +#define Y_AXIS_MIN X_AXIS_MIN +#define PRESSURE_MAX X_AXIS_MAX +#define PRESSURE_MIN X_AXIS_MIN + +static void pcap_ts_read_xy(void *data, u16 res[2]) +{ + struct pcap_ts *pcap_ts = data; + + switch (pcap_ts->read_state) { + case PCAP_ADC_TS_M_PRESSURE: + /* pressure reading is unreliable */ + if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX) + pcap_ts->pressure = res[0]; + pcap_ts->read_state = PCAP_ADC_TS_M_XY; + schedule_delayed_work(&pcap_ts->work, 0); + break; + case PCAP_ADC_TS_M_XY: + pcap_ts->y = res[0]; + pcap_ts->x = res[1]; + if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || + pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { + /* pen has been released */ + input_report_abs(pcap_ts->input, ABS_PRESSURE, 0); + input_report_key(pcap_ts->input, BTN_TOUCH, 0); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + } else { + /* pen is touching the screen */ + input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); + input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); + input_report_key(pcap_ts->input, BTN_TOUCH, 1); + input_report_abs(pcap_ts->input, ABS_PRESSURE, + pcap_ts->pressure); + + /* switch back to pressure read mode */ + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, + msecs_to_jiffies(SAMPLE_DELAY)); + } + input_sync(pcap_ts->input); + break; + default: + dev_warn(&pcap_ts->input->dev, + "pcap_ts: Warning, unhandled read_state %d\n", + pcap_ts->read_state); + break; + } +} + +static void pcap_ts_work(struct work_struct *work) +{ + struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); + u8 ch[2]; + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) + return; + + /* start adc conversion */ + ch[0] = PCAP_ADC_CH_TS_X1; + ch[1] = PCAP_ADC_CH_TS_Y1; + pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch, + pcap_ts_read_xy, pcap_ts); +} + +static irqreturn_t pcap_ts_event_touch(int pirq, void *data) +{ + struct pcap_ts *pcap_ts = data; + + if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) { + pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE; + schedule_delayed_work(&pcap_ts->work, 0); + } + return IRQ_HANDLED; +} + +static int pcap_ts_open(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY; + schedule_delayed_work(&pcap_ts->work, 0); + + return 0; +} + +static void pcap_ts_close(struct input_dev *dev) +{ + struct pcap_ts *pcap_ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&pcap_ts->work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); +} + +static int __devinit pcap_ts_probe(struct platform_device *pdev) +{ + struct input_dev *input_dev; + struct pcap_ts *pcap_ts; + int err = -ENOMEM; + + pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL); + if (!pcap_ts) + return err; + + pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent); + platform_set_drvdata(pdev, pcap_ts); + + input_dev = input_allocate_device(); + if (!input_dev) + goto fail; + + INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work); + + pcap_ts->read_state = PCAP_ADC_TS_M_NONTS; + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + + pcap_ts->input = input_dev; + input_set_drvdata(input_dev, pcap_ts); + + input_dev->name = "pcap-touchscreen"; + input_dev->phys = "pcap_ts/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &pdev->dev; + input_dev->open = pcap_ts_open; + input_dev->close = pcap_ts_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, + PRESSURE_MAX, 0, 0); + + err = input_register_device(pcap_ts->input); + if (err) + goto fail_allocate; + + err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), + pcap_ts_event_touch, 0, "Touch Screen", pcap_ts); + if (err) + goto fail_register; + + return 0; + +fail_register: + input_unregister_device(input_dev); + goto fail; +fail_allocate: + input_free_device(input_dev); +fail: + kfree(pcap_ts); + + return err; +} + +static int __devexit pcap_ts_remove(struct platform_device *pdev) +{ + struct pcap_ts *pcap_ts = platform_get_drvdata(pdev); + + free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts); + cancel_delayed_work_sync(&pcap_ts->work); + + input_unregister_device(pcap_ts->input); + + kfree(pcap_ts); + + return 0; +} + +#ifdef CONFIG_PM +static int pcap_ts_suspend(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR); + return 0; +} + +static int pcap_ts_resume(struct device *dev) +{ + struct pcap_ts *pcap_ts = dev_get_drvdata(dev); + + pcap_set_ts_bits(pcap_ts->pcap, + pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT); + return 0; +} + +static struct dev_pm_ops pcap_ts_pm_ops = { + .suspend = pcap_ts_suspend, + .resume = pcap_ts_resume, +}; +#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops) +#else +#define PCAP_TS_PM_OPS NULL +#endif + +static struct platform_driver pcap_ts_driver = { + .probe = pcap_ts_probe, + .remove = __devexit_p(pcap_ts_remove), + .driver = { + .name = "pcap-ts", + .owner = THIS_MODULE, + .pm = PCAP_TS_PM_OPS, + }, +}; + +static int __init pcap_ts_init(void) +{ + return platform_driver_register(&pcap_ts_driver); +} + +static void __exit pcap_ts_exit(void) +{ + platform_driver_unregister(&pcap_ts_driver); +} + +module_init(pcap_ts_init); +module_exit(pcap_ts_exit); + +MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); +MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcap_ts"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 491ac0f800d2..570be139f9df 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -108,6 +108,19 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. +config TWL4030_POWER + bool "Support power resources on TWL4030 family chips" + depends on TWL4030_CORE && ARM + help + Say yes here if you want to use the power resources on the + TWL4030 family chips. Most of these resources are regulators, + which have a separate driver; some are control signals, such + as clock request handshaking. + + This driver uses board-specific data to initialize the resources + and load scripts controling which resources are switched off/on + or reset when a sleep, wakeup or warm reset event occurs. + config MFD_TMIO bool default n @@ -157,6 +170,16 @@ config MFD_WM8400 the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_WM831X + tristate "Support Wolfson Microelectronics WM831x PMICs" + select MFD_CORE + depends on I2C + help + Support for the Wolfson Microelecronics WM831x PMICs. This + driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_WM8350 tristate @@ -228,6 +251,16 @@ config MFD_PCF50633 facilities, and registers devices for the various functions so that function-specific drivers can bind to them. +config MFD_MC13783 + tristate "Support Freescale MC13783" + depends on SPI_MASTER + select MFD_CORE + help + Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config PCF50633_ADC tristate "Support for NXP PCF50633 ADC" depends on MFD_PCF50633 @@ -256,6 +289,15 @@ config AB3100_CORE LEDs, vibrator, system power and temperature, power management and ALSA sound. +config AB3100_OTP + tristate "ST-Ericsson AB3100 OTP functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the AB3100 Mixed Signal IC OTP (one-time + programmable memory) support. This exposes a sysfs file to read + out OTP values. + config EZX_PCAP bool "PCAP Support" depends on GENERIC_HARDIRQS && SPI_MASTER diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 6f8a9a1af20b..f3b277b90d40 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o +wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o +obj-$(CONFIG_MFD_WM831X) += wm831x.o wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o @@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o +obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o + +obj-$(CONFIG_MFD_MC13783) += mc13783-core.o obj-$(CONFIG_MFD_CORE) += mfd-core.o @@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o +obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 13e7d7bfe85f..c533f86ff5ea 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/workqueue.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/uaccess.h> @@ -77,7 +76,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100) } EXPORT_SYMBOL(ab3100_get_chip_type); -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; int err; @@ -107,9 +106,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) err = 0; } mutex_unlock(&ab3100->access_mutex); - return 0; + return err; } -EXPORT_SYMBOL(ab3100_set_register); +EXPORT_SYMBOL(ab3100_set_register_interruptible); + /* * The test registers exist at an I2C bus address up one @@ -118,7 +118,7 @@ EXPORT_SYMBOL(ab3100_set_register); * anyway. It's currently only used from this file so declare * it static and do not export. */ -static int ab3100_set_test_register(struct ab3100 *ab3100, +static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; @@ -148,7 +148,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100, return err; } -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) + +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval) { int err; @@ -202,9 +203,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register); +EXPORT_SYMBOL(ab3100_get_register_interruptible); -int ab3100_get_register_page(struct ab3100 *ab3100, + +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs) { int err; @@ -258,9 +260,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register_page); +EXPORT_SYMBOL(ab3100_get_register_page_interruptible); + -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask) { u8 regandval[2] = {reg, 0}; @@ -328,7 +331,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_mask_and_set_register); +EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible); + /* * Register a simple callback for handling any AB3100 events. @@ -371,7 +375,7 @@ static void ab3100_work(struct work_struct *work) u32 fatevent; int err; - err = ab3100_get_register_page(ab3100, AB3100_EVENTA1, + err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, event_regs, 3); if (err) goto err_event_wq; @@ -417,7 +421,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data) * stuff and we will re-enable the interrupts once th * worker has finished. */ - disable_irq(ab3100->i2c_client->irq); + disable_irq_nosync(irq); schedule_work(&ab3100->work); return IRQ_HANDLED; } @@ -435,7 +439,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p) seq_printf(s, "AB3100 registers:\n"); for (reg = 0; reg < 0xff; reg++) { - ab3100_get_register(ab3100, reg, &value); + ab3100_get_register_interruptible(ab3100, reg, &value); seq_printf(s, "[0x%x]: 0x%x\n", reg, value); } return 0; @@ -465,14 +469,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file) return 0; } -static int ab3100_get_set_reg(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t ab3100_get_set_reg(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { struct ab3100_get_set_reg_priv *priv = file->private_data; struct ab3100 *ab3100 = priv->ab3100; char buf[32]; - int buf_size; + ssize_t buf_size; int regp; unsigned long user_reg; int err; @@ -515,7 +519,7 @@ static int ab3100_get_set_reg(struct file *file, u8 reg = (u8) user_reg; u8 regvalue; - ab3100_get_register(ab3100, reg, ®value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug read AB3100 reg[0x%02x]: 0x%02x\n", @@ -547,8 +551,8 @@ static int ab3100_get_set_reg(struct file *file, return -EINVAL; value = (u8) user_value; - ab3100_set_register(ab3100, reg, value); - ab3100_get_register(ab3100, reg, ®value); + ab3100_set_register_interruptible(ab3100, reg, value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug write reg[0x%02x] with 0x%02x, " @@ -662,7 +666,7 @@ ab3100_init_settings[] = { .setting = 0x01 }, { .abreg = AB3100_IMRB1, - .setting = 0xFF + .setting = 0xBF }, { .abreg = AB3100_IMRB2, .setting = 0xFF @@ -696,7 +700,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100) int i; for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) { - err = ab3100_set_register(ab3100, + err = ab3100_set_register_interruptible(ab3100, ab3100_init_settings[i].abreg, ab3100_init_settings[i].setting); if (err) @@ -705,14 +709,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100) /* * Special trick to make the AB3100 use the 32kHz clock (RTC) - * bit 3 in test registe 0x02 is a special, undocumented test + * bit 3 in test register 0x02 is a special, undocumented test * register bit that only exist in AB3100 P1E */ if (ab3100->chip_id == 0xc4) { dev_warn(ab3100->dev, "AB3100 P1E variant detected, " "forcing chip to 32KHz\n"); - err = ab3100_set_test_register(ab3100, 0x02, 0x08); + err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08); } exit_no_setup: @@ -833,6 +837,8 @@ static int __init ab3100_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ab3100 *ab3100; + struct ab3100_platform_data *ab3100_plf_data = + client->dev.platform_data; int err; int i; @@ -852,8 +858,8 @@ static int __init ab3100_probe(struct i2c_client *client, i2c_set_clientdata(client, ab3100); /* Read chip ID register */ - err = ab3100_get_register(ab3100, AB3100_CID, - &ab3100->chip_id); + err = ab3100_get_register_interruptible(ab3100, AB3100_CID, + &ab3100->chip_id); if (err) { dev_err(&client->dev, "could not communicate with the AB3100 analog " @@ -916,6 +922,8 @@ static int __init ab3100_probe(struct i2c_client *client, for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) { ab3100_platform_devs[i]->dev.parent = &client->dev; + ab3100_platform_devs[i]->dev.platform_data = + ab3100_plf_data; platform_set_drvdata(ab3100_platform_devs[i], ab3100); } diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c new file mode 100644 index 000000000000..0499b2031a2c --- /dev/null +++ b/drivers/mfd/ab3100-otp.c @@ -0,0 +1,268 @@ +/* + * drivers/mfd/ab3100_otp.c + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Driver to read out OTP from the AB3100 Mixed-signal circuit + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mfd/ab3100.h> +#include <linux/debugfs.h> + +/* The OTP registers */ +#define AB3100_OTP0 0xb0 +#define AB3100_OTP1 0xb1 +#define AB3100_OTP2 0xb2 +#define AB3100_OTP3 0xb3 +#define AB3100_OTP4 0xb4 +#define AB3100_OTP5 0xb5 +#define AB3100_OTP6 0xb6 +#define AB3100_OTP7 0xb7 +#define AB3100_OTPP 0xbf + +/** + * struct ab3100_otp + * @dev containing device + * @ab3100 a pointer to the parent ab3100 device struct + * @locked whether the OTP is locked, after locking, no more bits + * can be changed but before locking it is still possible + * to change bits from 1->0. + * @freq clocking frequency for the OTP, this frequency is either + * 32768Hz or 1MHz/30 + * @paf product activation flag, indicates whether this is a real + * product (paf true) or a lab board etc (paf false) + * @imeich if this is set it is possible to override the + * IMEI number found in the tac, fac and svn fields with + * (secured) software + * @cid customer ID + * @tac type allocation code of the IMEI + * @fac final assembly code of the IMEI + * @svn software version number of the IMEI + * @debugfs a debugfs file used when dumping to file + */ +struct ab3100_otp { + struct device *dev; + struct ab3100 *ab3100; + bool locked; + u32 freq; + bool paf; + bool imeich; + u16 cid:14; + u32 tac:20; + u8 fac; + u32 svn:20; + struct dentry *debugfs; +}; + +static int __init ab3100_otp_read(struct ab3100_otp *otp) +{ + struct ab3100 *ab = otp->ab3100; + u8 otpval[8]; + u8 otpp; + int err; + + err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp); + if (err) { + dev_err(otp->dev, "unable to read OTPP register\n"); + return err; + } + + err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0, + otpval, 8); + if (err) { + dev_err(otp->dev, "unable to read OTP register page\n"); + return err; + } + + /* Cache OTP properties, they never change by nature */ + otp->locked = (otpp & 0x80); + otp->freq = (otpp & 0x40) ? 32768 : 34100; + otp->paf = (otpval[1] & 0x80); + otp->imeich = (otpval[1] & 0x40); + otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff; + otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2]; + otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4); + otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4); + return 0; +} + +/* + * This is a simple debugfs human-readable file that dumps out + * the contents of the OTP. + */ +#ifdef CONFIG_DEBUGFS +static int show_otp(struct seq_file *s, void *v) +{ + struct ab3100_otp *otp = s->private; + int err; + + seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED"); + seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq); + seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET"); + seq_printf(s, "IMEI is %s\n", otp->imeich ? + "CHANGEABLE" : "NOT CHANGEABLE"); + seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid); + seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn); + return 0; +} + +static int ab3100_otp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab3100_otp_show, inode->i_private); +} + +static const struct file_operations ab3100_otp_operations = { + .open = ab3100_otp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO, + NULL, otp, + &ab3100_otp_operations); + if (!otp->debugfs) { + dev_err(dev, "AB3100 debugfs OTP file registration failed!\n"); + return err; + } +} + +static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ + debugfs_remove_file(otp->debugfs); +} +#else +/* Compile this out if debugfs not selected */ +static inline int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + return 0; +} + +static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ +} +#endif + +#define SHOW_AB3100_ATTR(name) \ +static ssize_t ab3100_otp_##name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{\ + struct ab3100_otp *otp = dev_get_drvdata(dev); \ + return sprintf(buf, "%u\n", otp->name); \ +} + +SHOW_AB3100_ATTR(locked) +SHOW_AB3100_ATTR(freq) +SHOW_AB3100_ATTR(paf) +SHOW_AB3100_ATTR(imeich) +SHOW_AB3100_ATTR(cid) +SHOW_AB3100_ATTR(fac) +SHOW_AB3100_ATTR(tac) +SHOW_AB3100_ATTR(svn) + +static struct device_attribute ab3100_otp_attrs[] = { + __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL), + __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL), + __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL), + __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL), + __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL), + __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL), + __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL), + __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL), +}; + +static int __init ab3100_otp_probe(struct platform_device *pdev) +{ + struct ab3100_otp *otp; + int err = 0; + int i; + + otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL); + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); + return -ENOMEM; + } + otp->dev = &pdev->dev; + + /* Replace platform data coming in with a local struct */ + otp->ab3100 = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, otp); + + err = ab3100_otp_read(otp); + if (err) + return err; + + dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); + + /* sysfs entries */ + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) { + err = device_create_file(&pdev->dev, + &ab3100_otp_attrs[i]); + if (err) + goto out_no_sysfs; + } + + /* debugfs entries */ + err = ab3100_otp_init_debugfs(&pdev->dev, otp); + if (err) + goto out_no_debugfs; + + return 0; + +out_no_sysfs: + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); +out_no_debugfs: + kfree(otp); + return err; +} + +static int __exit ab3100_otp_remove(struct platform_device *pdev) +{ + struct ab3100_otp *otp = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); + ab3100_otp_exit_debugfs(otp); + kfree(otp); + return 0; +} + +static struct platform_driver ab3100_otp_driver = { + .driver = { + .name = "ab3100-otp", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ab3100_otp_remove), +}; + +static int __init ab3100_otp_init(void) +{ + return platform_driver_probe(&ab3100_otp_driver, + ab3100_otp_probe); +} + +static void __exit ab3100_otp_exit(void) +{ + platform_driver_unregister(&ab3100_otp_driver); +} + +module_init(ab3100_otp_init); +module_exit(ab3100_otp_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 OTP Readout Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 5b6e58a3ba46..3d4a861976ca 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -107,8 +107,16 @@ static const u8 msp_gpios[] = { MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1), MSP_GPIO(4, SWITCH1), /* switches on MMC/SD sockets */ - MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */ - MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */ + /* + * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be + * checked for card detection. However on the EVM bit 1 and 3 gives + * this status, for 0 and 1 instance respectively. The pdf also + * suggests that Bit 1 and 3 should be checked for write protection. + * However on the EVM bit 2 and 4 gives this status,for 0 and 1 + * instance respectively. + */ + MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */ + MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */ }; #define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3) diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index c1de4afa89a6..016be4938e4c 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/mfd/ezx-pcap.h> #include <linux/spi/spi.h> +#include <linux/gpio.h> #define PCAP_ADC_MAXQ 8 struct pcap_adc_request { @@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value) } EXPORT_SYMBOL_GPL(ezx_pcap_read); +int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val) +{ + int ret; + u32 tmp = PCAP_REGISTER_READ_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + mutex_lock(&pcap->io_mutex); + ret = ezx_pcap_putget(pcap, &tmp); + if (ret) + goto out_unlock; + + tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask); + tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + ret = ezx_pcap_putget(pcap, &tmp); +out_unlock: + mutex_unlock(&pcap->io_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(ezx_pcap_set_bits); + /* IRQ */ -static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq) +int irq_to_pcap(struct pcap_chip *pcap, int irq) { - return 1 << (irq - pcap->irq_base); + return irq - pcap->irq_base; } +EXPORT_SYMBOL_GPL(irq_to_pcap); int pcap_to_irq(struct pcap_chip *pcap, int irq) { @@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr |= irq2pcap(pcap, irq); + pcap->msr |= 1 << irq_to_pcap(pcap, irq); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr &= ~irq2pcap(pcap, irq); + pcap->msr &= ~(1 << irq_to_pcap(pcap, irq)); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work) u32 msr, isr, int_sel, service; int irq; - ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); - ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); + do { + ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); + ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); - /* We cant service/ack irqs that are assigned to port 2 */ - if (!(pdata->config & PCAP_SECOND_PORT)) { - ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); - isr &= ~int_sel; - } - ezx_pcap_write(pcap, PCAP_REG_ISR, isr); + /* We cant service/ack irqs that are assigned to port 2 */ + if (!(pdata->config & PCAP_SECOND_PORT)) { + ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); + isr &= ~int_sel; + } - local_irq_disable(); - service = isr & ~msr; + ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr); + ezx_pcap_write(pcap, PCAP_REG_ISR, isr); - for (irq = pcap->irq_base; service; service >>= 1, irq++) { - if (service & 1) { - struct irq_desc *desc = irq_to_desc(irq); + local_irq_disable(); + service = isr & ~msr; + for (irq = pcap->irq_base; service; service >>= 1, irq++) { + if (service & 1) { + struct irq_desc *desc = irq_to_desc(irq); - if (WARN(!desc, KERN_WARNING - "Invalid PCAP IRQ %d\n", irq)) - break; + if (WARN(!desc, KERN_WARNING + "Invalid PCAP IRQ %d\n", irq)) + break; - if (desc->status & IRQ_DISABLED) - note_interrupt(irq, desc, IRQ_NONE); - else - desc->handle_irq(irq, desc); + if (desc->status & IRQ_DISABLED) + note_interrupt(irq, desc, IRQ_NONE); + else + desc->handle_irq(irq, desc); + } } - } - local_irq_enable(); + local_irq_enable(); + ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); + } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) } /* ADC */ +void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits) +{ + u32 tmp; + + mutex_lock(&pcap->adc_mutex); + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); +} +EXPORT_SYMBOL_GPL(pcap_set_ts_bits); + static void pcap_disable_adc(struct pcap_chip *pcap) { u32 tmp; @@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap) mutex_unlock(&pcap->adc_mutex); return; } - mutex_unlock(&pcap->adc_mutex); - - /* start conversion on requested bank */ - tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; + /* start conversion on requested bank, save TS_M bits */ + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1) tmp |= PCAP_ADC_AD_SEL1; ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC); } @@ -499,7 +542,7 @@ static void __exit ezx_pcap_exit(void) spi_unregister_driver(&ezxpcap_driver); } -module_init(ezx_pcap_init); +subsys_initcall(ezx_pcap_init); module_exit(ezx_pcap_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c new file mode 100644 index 000000000000..e354d2912ef1 --- /dev/null +++ b/drivers/mfd/mc13783-core.c @@ -0,0 +1,427 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * This code is in parts based on wm8350-core.c and pcf50633-core.c + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/spi/spi.h> +#include <linux/uaccess.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/irq.h> + +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_FRAME_MASK 0x00ffffff +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_REG_NUM_SHIFT 0x19 +#define MC13783_WRITE_BIT_SHIFT 31 + +static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = (const void *)buf, + .rx_buf = buf, + .len = len, + .cs_change = 0, + .delay_usecs = 0, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + if (spi_sync(spi, &m) != 0 || m.status != 0) + return -EINVAL; + return len - m.actual_length; +} + +static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + unsigned int frame = 0; + int ret = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= reg_num << MC13783_REG_NUM_SHIFT; + + ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4); + + *reg_val = frame & MC13783_FRAME_MASK; + + return ret; +} + +static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + unsigned int frame = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= (1 << MC13783_WRITE_BIT_SHIFT); + frame |= reg_num << MC13783_REG_NUM_SHIFT; + frame |= reg_val & MC13783_FRAME_MASK; + + return spi_rw(mc13783->spi_device, (u8 *)&frame, 4); +} + +int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_read(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_read); + +int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_write(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_write); + +/** + * mc13783_set_bits - Bitmask write + * + * @mc13783: Pointer to mc13783 control structure + * @reg: Register to access + * @mask: Mask of bits to change + * @val: Value to set for masked bits + */ +int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val) +{ + u32 tmp; + int ret; + + mutex_lock(&mc13783->io_lock); + + ret = mc13783_read(mc13783, reg, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) + ret = mc13783_write(mc13783, reg, tmp); + + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_set_bits); + +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ || !handler) + return -EINVAL; + + if (WARN_ON(mc13783->irq_handler[irq].handler)) + return -EBUSY; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = handler; + mc13783->irq_handler[irq].data = data; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_register_irq); + +int mc13783_free_irq(struct mc13783 *mc13783, int irq) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ) + return -EINVAL; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = NULL; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_free_irq); + +static void mc13783_irq_work(struct work_struct *work) +{ + struct mc13783 *mc13783 = container_of(work, struct mc13783, work); + int i; + unsigned int adc_sts; + + /* check if the adc has finished any completion */ + mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, + adc_sts & MC13783_INT_STAT_ADCDONEI); + + if (adc_sts & MC13783_INT_STAT_ADCDONEI) + complete_all(&mc13783->adc_done); + + for (i = 0; i < MC13783_NUM_IRQ; i++) + if (mc13783->irq_handler[i].handler) + mc13783->irq_handler[i].handler(i, + mc13783->irq_handler[i].data); + enable_irq(mc13783->irq); +} + +static irqreturn_t mc13783_interrupt(int irq, void *dev_id) +{ + struct mc13783 *mc13783 = dev_id; + + disable_irq_nosync(irq); + + schedule_work(&mc13783->work); + return IRQ_HANDLED; +} + +/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */ +static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783) +{ + unsigned int reg_adc0, reg_adc1; + + reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0; + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN; + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); +} + +int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, + unsigned int channel, unsigned int *sample) +{ + unsigned int reg_adc0, reg_adc1; + int i; + + mutex_lock(&mc13783->adc_conv_lock); + + /* set up auto incrementing anyway to make quick read */ + reg_adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2; + /* enable the adc, ignore external triggering and set ASC to trigger + * conversion */ + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN + | MC13783_ADC1_ASC; + + /* setup channel number */ + if (channel > 7) + reg_adc1 |= MC13783_ADC1_ADSEL; + + switch (mode) { + case MC13783_ADC_MODE_TS: + /* enables touch screen reference mode and set touchscreen mode + * to position mode */ + reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1; + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + case MC13783_ADC_MODE_SINGLE_CHAN: + reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT; + reg_adc1 |= MC13783_ADC1_RAND; + break; + case MC13783_ADC_MODE_MULT_CHAN: + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + default: + return -EINVAL; + } + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); + + wait_for_completion_interruptible(&mc13783->adc_done); + + for (i = 0; i < 4; i++) + mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]); + + if (mc13783->ts_active) + mc13783_adc_set_ts_irq_mode(mc13783); + + mutex_unlock(&mc13783->adc_conv_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion); + +void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status) +{ + mc13783->ts_active = status; +} +EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status); + +static int mc13783_check_revision(struct mc13783 *mc13783) +{ + u32 rev_id, rev1, rev2, finid, icid; + + mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id); + + rev1 = (rev_id & 0x018) >> 3; + rev2 = (rev_id & 0x007); + icid = (rev_id & 0x01C0) >> 6; + finid = (rev_id & 0x01E00) >> 9; + + /* Ver 0.2 is actually 3.2a. Report as 3.2 */ + if ((rev1 == 0) && (rev2 == 2)) + rev1 = 3; + + if (rev1 == 0 || icid != 2) { + dev_err(mc13783->dev, "No MC13783 detected.\n"); + return -ENODEV; + } + + mc13783->revision = ((rev1 * 10) + rev2); + dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1, + rev2, finid); + + return 0; +} + +/* + * Register a client device. This is non-fatal since there is no need to + * fail the entire device init due to a single platform device failing. + */ +static void mc13783_client_dev_register(struct mc13783 *mc13783, + const char *name) +{ + struct mfd_cell cell = {}; + + cell.name = name; + + mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0); +} + +static int __devinit mc13783_probe(struct spi_device *spi) +{ + struct mc13783 *mc13783; + struct mc13783_platform_data *pdata = spi->dev.platform_data; + int ret; + + mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL); + if (!mc13783) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, mc13783); + spi->mode = SPI_MODE_0 | SPI_CS_HIGH; + spi->bits_per_word = 32; + spi_setup(spi); + + mc13783->spi_device = spi; + mc13783->dev = &spi->dev; + mc13783->irq = spi->irq; + + INIT_WORK(&mc13783->work, mc13783_irq_work); + mutex_init(&mc13783->io_lock); + mutex_init(&mc13783->adc_conv_lock); + init_completion(&mc13783->adc_done); + + if (pdata) { + mc13783->flags = pdata->flags; + mc13783->regulators = pdata->regulators; + mc13783->num_regulators = pdata->num_regulators; + } + + if (mc13783_check_revision(mc13783)) { + ret = -ENODEV; + goto err_out; + } + + /* clear and mask all interrupts */ + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff); + + /* unmask adcdone interrupts */ + mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0, + MC13783_INT_MASK_ADCDONEM, 0); + + ret = request_irq(mc13783->irq, mc13783_interrupt, + IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783", + mc13783); + if (ret) + goto err_out; + + if (mc13783->flags & MC13783_USE_CODEC) + mc13783_client_dev_register(mc13783, "mc13783-codec"); + if (mc13783->flags & MC13783_USE_ADC) + mc13783_client_dev_register(mc13783, "mc13783-adc"); + if (mc13783->flags & MC13783_USE_RTC) + mc13783_client_dev_register(mc13783, "mc13783-rtc"); + if (mc13783->flags & MC13783_USE_REGULATOR) + mc13783_client_dev_register(mc13783, "mc13783-regulator"); + if (mc13783->flags & MC13783_USE_TOUCHSCREEN) + mc13783_client_dev_register(mc13783, "mc13783-ts"); + + return 0; + +err_out: + kfree(mc13783); + return ret; +} + +static int __devexit mc13783_remove(struct spi_device *spi) +{ + struct mc13783 *mc13783; + + mc13783 = dev_get_drvdata(&spi->dev); + + free_irq(mc13783->irq, mc13783); + + mfd_remove_devices(&spi->dev); + + return 0; +} + +static struct spi_driver pmic_driver = { + .driver = { + .name = "mc13783", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = mc13783_probe, + .remove = __devexit_p(mc13783_remove), +}; + +static int __init pmic_init(void) +{ + return spi_register_driver(&pmic_driver); +} +subsys_initcall(pmic_init); + +static void __exit pmic_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_exit); + +MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 54ddf3772e0c..ae15e495e20e 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id, int ret = -ENOMEM; int r; - pdev = platform_device_alloc(cell->name, id); + pdev = platform_device_alloc(cell->name, id + cell->id); if (!pdev) goto fail_alloc; diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c index c2d05becfa97..3d31e97d6a45 100644 --- a/drivers/mfd/pcf50633-adc.c +++ b/drivers/mfd/pcf50633-adc.c @@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf) struct pcf50633_adc *adc = __to_adc(pcf); int head; - mutex_lock(&adc->queue_mutex); - head = adc->queue_head; - if (!adc->queue[head]) { - mutex_unlock(&adc->queue_mutex); + if (!adc->queue[head]) return; - } - mutex_unlock(&adc->queue_mutex); adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg); } @@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req) if (adc->queue[tail]) { mutex_unlock(&adc->queue_mutex); + dev_err(pcf->dev, "ADC queue is full, dropping request\n"); return -EBUSY; } adc->queue[tail] = req; + if (head == tail) + trigger_next_adc_job_if_any(pcf); adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); mutex_unlock(&adc->queue_mutex); - trigger_next_adc_job_if_any(pcf); - return 0; } @@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result) int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) { struct pcf50633_adc_request *req; + int err; /* req is freed when the result is ready, in interrupt handler */ req = kzalloc(sizeof(*req), GFP_KERNEL); @@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) req->callback_param = req; init_completion(&req->completion); - adc_enqueue_request(pcf, req); + err = adc_enqueue_request(pcf, req); + if (err) + return err; + wait_for_completion(&req->completion); + /* FIXME by this time req might be already freed */ return req->result; } EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read); @@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg, req->callback = callback; req->callback_param = callback_param; - adc_enqueue_request(pcf, req); - - return 0; + return adc_enqueue_request(pcf, req); } EXPORT_SYMBOL_GPL(pcf50633_adc_async_read); @@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data) struct pcf50633_adc *adc = data; struct pcf50633 *pcf = adc->pcf; struct pcf50633_adc_request *req; - int head; + int head, res; mutex_lock(&adc->queue_mutex); head = adc->queue_head; @@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data) adc->queue_head = (head + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); + res = adc_result(pcf); + trigger_next_adc_job_if_any(pcf); + mutex_unlock(&adc->queue_mutex); - req->callback(pcf, req->callback_param, adc_result(pcf)); + req->callback(pcf, req->callback_param, res); kfree(req); - - trigger_next_adc_job_if_any(pcf); } static int __devinit pcf50633_adc_probe(struct platform_device *pdev) diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 8d3c38bf9714..d26d7747175e 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) get_device(pcf->dev); disable_irq_nosync(pcf->irq); - schedule_work(&pcf->irq_work); + queue_work(pcf->work_queue, &pcf->irq_work); return IRQ_HANDLED; } @@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, pcf->dev = &client->dev; pcf->i2c_client = client; pcf->irq = client->irq; + pcf->work_queue = create_singlethread_workqueue("pcf50633"); INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); @@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, return 0; err: + destroy_workqueue(pcf->work_queue); kfree(pcf); return ret; } @@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) int i; free_irq(pcf->irq, pcf); + destroy_workqueue(pcf->work_queue); platform_device_unregister(pcf->input_pdev); platform_device_unregister(pcf->rtc_pdev); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index ca54996ffd0e..e424cf6d8e9e 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -89,6 +89,12 @@ #define twl_has_madc() false #endif +#ifdef CONFIG_TWL4030_POWER +#define twl_has_power() true +#else +#define twl_has_power() false +#endif + #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) #define twl_has_rtc() true #else @@ -115,6 +121,12 @@ #define TWL4030_NUM_SLAVES 4 +#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ + || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) +#define twl_has_pwrbutton() true +#else +#define twl_has_pwrbutton() false +#endif /* Base Address defns for twl4030_map[] */ @@ -538,6 +550,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } + if (twl_has_pwrbutton()) { + child = add_child(1, "twl4030_pwrbutton", + NULL, 0, true, pdata->irq_base + 8 + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + if (twl_has_regulator()) { /* child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); @@ -788,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) /* setup clock framework */ clocks_init(&client->dev); + /* load power event scripts */ + if (twl_has_power() && pdata->power) + twl4030_power_init(pdata->power); + /* Maybe init the T2 Interrupt subsystem */ if (client->irq && pdata->irq_base diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 7d430835655f..fb194fe244c1 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) /* see what work we have */ spin_lock_irq(&sih_agent_lock); edge_change = agent->edge_change; - agent->edge_change = 0;; + agent->edge_change = 0; sih = edge_change ? agent->sih : NULL; spin_unlock_irq(&sih_agent_lock); if (!sih) diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c new file mode 100644 index 000000000000..d423e0c4176b --- /dev/null +++ b/drivers/mfd/twl4030-power.c @@ -0,0 +1,472 @@ +/* + * linux/drivers/i2c/chips/twl4030-power.c + * + * Handle TWL4030 Power initialization + * + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2006 Texas Instruments, Inc + * + * Written by Kalle Jokiniemi + * Peter De Schrijver <peter.de-schrijver@nokia.com> + * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/i2c/twl4030.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +static u8 twl4030_start_script_address = 0x2b; + +#define PWR_P1_SW_EVENTS 0x10 +#define PWR_DEVOFF (1<<0) + +#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) +#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b) + +/* resource - hfclk */ +#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6) + +/* PM events */ +#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46) +#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47) +#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48) +#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36) +#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) +#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) + +#define LVL_WAKEUP 0x08 + +#define ENABLE_WARMRESET (1<<4) + +#define END_OF_SCRIPT 0x3f + +#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) +#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56) +#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57) +#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58) +#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59) +#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a) + +#define R_PROTECT_KEY 0x0E +#define R_KEY_1 0xC0 +#define R_KEY_2 0x0C + +/* resource configuration registers */ + +#define DEVGROUP_OFFSET 0 +#define TYPE_OFFSET 1 + +/* Bit positions */ +#define DEVGROUP_SHIFT 5 +#define DEVGROUP_MASK (7 << DEVGROUP_SHIFT) +#define TYPE_SHIFT 0 +#define TYPE_MASK (7 << TYPE_SHIFT) +#define TYPE2_SHIFT 3 +#define TYPE2_MASK (3 << TYPE2_SHIFT) + +static u8 res_config_addrs[] = { + [RES_VAUX1] = 0x17, + [RES_VAUX2] = 0x1b, + [RES_VAUX3] = 0x1f, + [RES_VAUX4] = 0x23, + [RES_VMMC1] = 0x27, + [RES_VMMC2] = 0x2b, + [RES_VPLL1] = 0x2f, + [RES_VPLL2] = 0x33, + [RES_VSIM] = 0x37, + [RES_VDAC] = 0x3b, + [RES_VINTANA1] = 0x3f, + [RES_VINTANA2] = 0x43, + [RES_VINTDIG] = 0x47, + [RES_VIO] = 0x4b, + [RES_VDD1] = 0x55, + [RES_VDD2] = 0x63, + [RES_VUSB_1V5] = 0x71, + [RES_VUSB_1V8] = 0x74, + [RES_VUSB_3V1] = 0x77, + [RES_VUSBCP] = 0x7a, + [RES_REGEN] = 0x7f, + [RES_NRES_PWRON] = 0x82, + [RES_CLKEN] = 0x85, + [RES_SYSEN] = 0x88, + [RES_HFCLKOUT] = 0x8b, + [RES_32KCLKOUT] = 0x8e, + [RES_RESET] = 0x91, + [RES_Main_Ref] = 0x94, +}; + +static int __init twl4030_write_script_byte(u8 address, u8 byte) +{ + int err; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_MEMORY_ADDRESS); + if (err) + goto out; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, + R_MEMORY_DATA); +out: + return err; +} + +static int __init twl4030_write_script_ins(u8 address, u16 pmb_message, + u8 delay, u8 next) +{ + int err; + + address *= 4; + err = twl4030_write_script_byte(address++, pmb_message >> 8); + if (err) + goto out; + err = twl4030_write_script_byte(address++, pmb_message & 0xff); + if (err) + goto out; + err = twl4030_write_script_byte(address++, delay); + if (err) + goto out; + err = twl4030_write_script_byte(address++, next); +out: + return err; +} + +static int __init twl4030_write_script(u8 address, struct twl4030_ins *script, + int len) +{ + int err; + + for (; len; len--, address++, script++) { + if (len == 1) { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + END_OF_SCRIPT); + if (err) + break; + } else { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + address + 1); + if (err) + break; + } + } + return err; +} + +static int __init twl4030_config_wakeup3_sequence(u8 address) +{ + int err; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P3 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A3); + if (err) + goto out; + + /* P3 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P3_SW_EVENTS); + if (err) + goto out; + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 wakeup sequence for P3 config error\n"); + return err; +} + +static int __init twl4030_config_wakeup12_sequence(u8 address) +{ + int err = 0; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A12); + if (err) + goto out; + + /* P1/P2 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P1_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P2_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P2_SW_EVENTS); + if (err) + goto out; + + if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { + /* Disabling AC charger effect on sleep-active transitions */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_CFG_P1_TRANSITION); + if (err) + goto out; + data &= ~(1<<1); + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , + R_CFG_P1_TRANSITION); + if (err) + goto out; + } + +out: + if (err) + pr_err("TWL4030 wakeup sequence for P1 and P2" \ + "config error\n"); + return err; +} + +static int __init twl4030_config_sleep_sequence(u8 address) +{ + int err; + + /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_A2S); + + if (err) + pr_err("TWL4030 sleep sequence config error\n"); + + return err; +} + +static int __init twl4030_config_warmreset_sequence(u8 address) +{ + int err; + u8 rd_data; + + /* Set WARM RESET SEQ address for P1 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_WARM); + if (err) + goto out; + + /* P1/P2/P3 enable WARMRESET */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P3_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 warmreset seq config error\n"); + return err; +} + +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) +{ + int rconfig_addr; + int err; + u8 type; + u8 grp; + + if (rconfig->resource > TOTAL_RESOURCES) { + pr_err("TWL4030 Resource %d does not exist\n", + rconfig->resource); + return -EINVAL; + } + + rconfig_addr = res_config_addrs[rconfig->resource]; + + /* Set resource group */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, + rconfig_addr + DEVGROUP_OFFSET); + if (err) { + pr_err("TWL4030 Resource %d group could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->devgroup >= 0) { + grp &= ~DEVGROUP_MASK; + grp |= rconfig->devgroup << DEVGROUP_SHIFT; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + grp, rconfig_addr + DEVGROUP_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program devgroup\n"); + return err; + } + } + + /* Set resource types */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 Resource %d type could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->type >= 0) { + type &= ~TYPE_MASK; + type |= rconfig->type << TYPE_SHIFT; + } + + if (rconfig->type2 >= 0) { + type &= ~TYPE2_MASK; + type |= rconfig->type2 << TYPE2_SHIFT; + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + type, rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program resource type\n"); + return err; + } + + return 0; +} + +static int __init load_twl4030_script(struct twl4030_script *tscript, + u8 address) +{ + int err; + static int order; + + /* Make sure the script isn't going beyond last valid address (0x3f) */ + if ((address + tscript->size) > END_OF_SCRIPT) { + pr_err("TWL4030 scripts too big error\n"); + return -EINVAL; + } + + err = twl4030_write_script(address, tscript->script, tscript->size); + if (err) + goto out; + + if (tscript->flags & TWL4030_WRST_SCRIPT) { + err = twl4030_config_warmreset_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) { + err = twl4030_config_wakeup12_sequence(address); + if (err) + goto out; + order = 1; + } + if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) { + err = twl4030_config_wakeup3_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_SLEEP_SCRIPT) + if (order) + pr_warning("TWL4030: Bad order of scripts (sleep "\ + "script before wakeup) Leads to boot"\ + "failure on some boards\n"); + err = twl4030_config_sleep_sequence(address); +out: + return err; +} + +void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) +{ + int err = 0; + int i; + struct twl4030_resconfig *resconfig; + u8 address = twl4030_start_script_address; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, + R_PROTECT_KEY); + if (err) + goto unlock; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, + R_PROTECT_KEY); + if (err) + goto unlock; + + for (i = 0; i < twl4030_scripts->num; i++) { + err = load_twl4030_script(twl4030_scripts->scripts[i], address); + if (err) + goto load; + address += twl4030_scripts->scripts[i]->size; + } + + resconfig = twl4030_scripts->resource_config; + if (resconfig) { + while (resconfig->resource) { + err = twl4030_configure_resource(resconfig); + if (err) + goto resource; + resconfig++; + + } + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); + if (err) + pr_err("TWL4030 Unable to relock registers\n"); + return; + +unlock: + if (err) + pr_err("TWL4030 Unable to unlock registers\n"); + return; +load: + if (err) + pr_err("TWL4030 failed to load scripts\n"); + return; +resource: + if (err) + pr_err("TWL4030 failed to configure resource\n"); + return; +} diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c new file mode 100644 index 000000000000..49b7885c2702 --- /dev/null +++ b/drivers/mfd/wm831x-core.c @@ -0,0 +1,1549 @@ +/* + * wm831x-core.c -- Device access for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/auxadc.h> +#include <linux/mfd/wm831x/otp.h> +#include <linux/mfd/wm831x/regulator.h> + +/* Current settings - values are 2*2^(reg_val/4) microamps. These are + * exported since they are used by multiple drivers. + */ +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { + 2, + 2, + 3, + 3, + 4, + 5, + 6, + 7, + 8, + 10, + 11, + 13, + 16, + 19, + 23, + 27, + 32, + 38, + 45, + 54, + 64, + 76, + 91, + 108, + 128, + 152, + 181, + 215, + 256, + 304, + 362, + 431, + 512, + 609, + 724, + 861, + 1024, + 1218, + 1448, + 1722, + 2048, + 2435, + 2896, + 3444, + 4096, + 4871, + 5793, + 6889, + 8192, + 9742, + 11585, + 13777, + 16384, + 19484, + 23170, + 27554, +}; +EXPORT_SYMBOL_GPL(wm831x_isinkv_values); + +enum wm831x_parent { + WM8310 = 0, + WM8311 = 1, + WM8312 = 2, +}; + +static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) +{ + if (!wm831x->locked) + return 0; + + switch (reg) { + case WM831X_WATCHDOG: + case WM831X_DC4_CONTROL: + case WM831X_ON_PIN_CONTROL: + case WM831X_BACKUP_CHARGER_CONTROL: + case WM831X_CHARGER_CONTROL_1: + case WM831X_CHARGER_CONTROL_2: + return 1; + + default: + return 0; + } +} + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * allowing writes to them. + */ +void wm831x_reg_lock(struct wm831x *wm831x) +{ + int ret; + + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers locked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(wm831x->locked); + wm831x->locked = 1; + mutex_unlock(&wm831x->io_lock); + } else { + dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret); + } + +} +EXPORT_SYMBOL_GPL(wm831x_reg_lock); + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * preventing spurious writes. + */ +int wm831x_reg_unlock(struct wm831x *wm831x) +{ + int ret; + + /* 0x9716 is the value required to unlock the registers */ + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers unlocked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(!wm831x->locked); + wm831x->locked = 0; + mutex_unlock(&wm831x->io_lock); + } + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_unlock); + +static int wm831x_read(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + int ret, i; + u16 *buf = dest; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + ret = wm831x->read_dev(wm831x, reg, bytes, dest); + if (ret < 0) + return ret; + + for (i = 0; i < bytes / 2; i++) { + buf[i] = be16_to_cpu(buf[i]); + + dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n", + buf[i], reg + i, reg + i); + } + + return 0; +} + +/** + * wm831x_reg_read: Read a single WM831x register. + * + * @wm831x: Device to read from. + * @reg: Register to read. + */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg) +{ + unsigned short val; + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + if (ret < 0) + return ret; + else + return val; +} +EXPORT_SYMBOL_GPL(wm831x_reg_read); + +/** + * wm831x_bulk_read: Read multiple WM831x registers + * + * @wm831x: Device to read from + * @reg: First register + * @count: Number of registers + * @buf: Buffer to fill. + */ +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, count * 2, buf); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_bulk_read); + +static int wm831x_write(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + u16 *buf = src; + int i; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + for (i = 0; i < bytes / 2; i++) { + if (wm831x_reg_locked(wm831x, reg)) + return -EPERM; + + dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n", + buf[i], reg + i, reg + i); + + buf[i] = cpu_to_be16(buf[i]); + } + + return wm831x->write_dev(wm831x, reg, bytes, src); +} + +/** + * wm831x_reg_write: Write a single WM831x register. + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + */ +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_write(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_write); + +/** + * wm831x_set_bits: Set the value of a bitfield in a WM831x register + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @mask: Mask of bits to set. + * @val: Value to set (unshifted) + */ +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val) +{ + int ret; + u16 r; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &r); + if (ret < 0) + goto out; + + r &= ~mask; + r |= val; + + ret = wm831x_write(wm831x, reg, 2, &r); + +out: + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_set_bits); + +/** + * wm831x_auxadc_read: Read a value from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int tries = 10; + int ret, src; + + mutex_lock(&wm831x->auxadc_lock); + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_ENA, WM831X_AUX_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); + goto out; + } + + /* We force a single source at present */ + src = input; + ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, + 1 << src); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); + goto out; + } + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); + goto disable; + } + + do { + msleep(1); + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL); + if (ret < 0) + ret = WM831X_AUX_CVT_ENA; + } while ((ret & WM831X_AUX_CVT_ENA) && --tries); + + if (ret & WM831X_AUX_CVT_ENA) { + dev_err(wm831x->dev, "Timed out reading AUXADC\n"); + ret = -EBUSY; + goto disable; + } + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret); + } else { + src = ((ret & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (src == 14) + src = WM831X_AUX_CAL; + + if (src != input) { + dev_err(wm831x->dev, "Data from source %d not %d\n", + src, input); + ret = -EINVAL; + } else { + ret &= WM831X_AUX_DATA_MASK; + } + } + +disable: + wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); +out: + mutex_unlock(&wm831x->auxadc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read); + +/** + * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int ret; + + ret = wm831x_auxadc_read(wm831x, input); + if (ret < 0) + return ret; + + ret *= 1465; + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); + +static struct resource wm831x_dcdc1_resources[] = { + { + .start = WM831X_DC1_CONTROL_1, + .end = WM831X_DC1_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC1, + .end = WM831X_IRQ_UV_DC1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC1, + .end = WM831X_IRQ_HC_DC1, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_dcdc2_resources[] = { + { + .start = WM831X_DC2_CONTROL_1, + .end = WM831X_DC2_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC2, + .end = WM831X_IRQ_UV_DC2, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC2, + .end = WM831X_IRQ_HC_DC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc3_resources[] = { + { + .start = WM831X_DC3_CONTROL_1, + .end = WM831X_DC3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC3, + .end = WM831X_IRQ_UV_DC3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc4_resources[] = { + { + .start = WM831X_DC4_CONTROL, + .end = WM831X_DC4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC4, + .end = WM831X_IRQ_UV_DC4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_gpio_resources[] = { + { + .start = WM831X_IRQ_GPIO_1, + .end = WM831X_IRQ_GPIO_16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink1_resources[] = { + { + .start = WM831X_CURRENT_SINK_1, + .end = WM831X_CURRENT_SINK_1, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS1, + .end = WM831X_IRQ_CS1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink2_resources[] = { + { + .start = WM831X_CURRENT_SINK_2, + .end = WM831X_CURRENT_SINK_2, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS2, + .end = WM831X_IRQ_CS2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo1_resources[] = { + { + .start = WM831X_LDO1_CONTROL, + .end = WM831X_LDO1_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO1, + .end = WM831X_IRQ_UV_LDO1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo2_resources[] = { + { + .start = WM831X_LDO2_CONTROL, + .end = WM831X_LDO2_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO2, + .end = WM831X_IRQ_UV_LDO2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo3_resources[] = { + { + .start = WM831X_LDO3_CONTROL, + .end = WM831X_LDO3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO3, + .end = WM831X_IRQ_UV_LDO3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo4_resources[] = { + { + .start = WM831X_LDO4_CONTROL, + .end = WM831X_LDO4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO4, + .end = WM831X_IRQ_UV_LDO4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo5_resources[] = { + { + .start = WM831X_LDO5_CONTROL, + .end = WM831X_LDO5_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO5, + .end = WM831X_IRQ_UV_LDO5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo6_resources[] = { + { + .start = WM831X_LDO6_CONTROL, + .end = WM831X_LDO6_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO6, + .end = WM831X_IRQ_UV_LDO6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo7_resources[] = { + { + .start = WM831X_LDO7_CONTROL, + .end = WM831X_LDO7_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO7, + .end = WM831X_IRQ_UV_LDO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo8_resources[] = { + { + .start = WM831X_LDO8_CONTROL, + .end = WM831X_LDO8_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO8, + .end = WM831X_IRQ_UV_LDO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo9_resources[] = { + { + .start = WM831X_LDO9_CONTROL, + .end = WM831X_LDO9_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO9, + .end = WM831X_IRQ_UV_LDO9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo10_resources[] = { + { + .start = WM831X_LDO10_CONTROL, + .end = WM831X_LDO10_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO10, + .end = WM831X_IRQ_UV_LDO10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo11_resources[] = { + { + .start = WM831X_LDO11_ON_CONTROL, + .end = WM831X_LDO11_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_on_resources[] = { + { + .start = WM831X_IRQ_ON, + .end = WM831X_IRQ_ON, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_power_resources[] = { + { + .name = "SYSLO", + .start = WM831X_IRQ_PPM_SYSLO, + .end = WM831X_IRQ_PPM_SYSLO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWR SRC", + .start = WM831X_IRQ_PPM_PWR_SRC, + .end = WM831X_IRQ_PPM_PWR_SRC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB CURR", + .start = WM831X_IRQ_PPM_USB_CURR, + .end = WM831X_IRQ_PPM_USB_CURR, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT HOT", + .start = WM831X_IRQ_CHG_BATT_HOT, + .end = WM831X_IRQ_CHG_BATT_HOT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT COLD", + .start = WM831X_IRQ_CHG_BATT_COLD, + .end = WM831X_IRQ_CHG_BATT_COLD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT FAIL", + .start = WM831X_IRQ_CHG_BATT_FAIL, + .end = WM831X_IRQ_CHG_BATT_FAIL, + .flags = IORESOURCE_IRQ, + }, + { + .name = "OV", + .start = WM831X_IRQ_CHG_OV, + .end = WM831X_IRQ_CHG_OV, + .flags = IORESOURCE_IRQ, + }, + { + .name = "END", + .start = WM831X_IRQ_CHG_END, + .end = WM831X_IRQ_CHG_END, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TO", + .start = WM831X_IRQ_CHG_TO, + .end = WM831X_IRQ_CHG_TO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MODE", + .start = WM831X_IRQ_CHG_MODE, + .end = WM831X_IRQ_CHG_MODE, + .flags = IORESOURCE_IRQ, + }, + { + .name = "START", + .start = WM831X_IRQ_CHG_START, + .end = WM831X_IRQ_CHG_START, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_rtc_resources[] = { + { + .name = "PER", + .start = WM831X_IRQ_RTC_PER, + .end = WM831X_IRQ_RTC_PER, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ALM", + .start = WM831X_IRQ_RTC_ALM, + .end = WM831X_IRQ_RTC_ALM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_status1_resources[] = { + { + .start = WM831X_STATUS_LED_1, + .end = WM831X_STATUS_LED_1, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_status2_resources[] = { + { + .start = WM831X_STATUS_LED_2, + .end = WM831X_STATUS_LED_2, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_touch_resources[] = { + { + .name = "TCHPD", + .start = WM831X_IRQ_TCHPD, + .end = WM831X_IRQ_TCHPD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TCHDATA", + .start = WM831X_IRQ_TCHDATA, + .end = WM831X_IRQ_TCHDATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_wdt_resources[] = { + { + .start = WM831X_IRQ_WDOG_TO, + .end = WM831X_IRQ_WDOG_TO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell wm8310_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8311_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8312_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell backlight_devs[] = { + { + .name = "wm831x-backlight", + }, +}; + +/* + * Instantiate the generic non-control parts of the device. + */ +static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) +{ + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int rev; + enum wm831x_parent parent; + int ret; + + mutex_init(&wm831x->io_lock); + mutex_init(&wm831x->key_lock); + mutex_init(&wm831x->auxadc_lock); + dev_set_drvdata(wm831x->dev, wm831x); + + ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret); + goto err; + } + if (ret != 0x6204) { + dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret); + ret = -EINVAL; + goto err; + } + + ret = wm831x_reg_read(wm831x, WM831X_REVISION); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read revision: %d\n", ret); + goto err; + } + rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT; + + ret = wm831x_reg_read(wm831x, WM831X_RESET_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret); + goto err; + } + + switch (ret) { + case 0x8310: + parent = WM8310; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8310 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8311: + parent = WM8311; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8311 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8312: + parent = WM8312; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8312 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0: + /* Some engineering samples do not have the ID set, + * rely on the device being registered correctly. + * This will need revisiting for future devices with + * multiple dies. + */ + parent = id; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM831%d ES revision %c\n", + parent, 'A' + rev); + break; + } + break; + + default: + dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); + ret = -EINVAL; + goto err; + } + + /* This will need revisiting in future but is OK for all + * current parts. + */ + if (parent != id) + dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n", + id); + + /* Bootstrap the user key */ + ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read security key: %d\n", ret); + goto err; + } + if (ret != 0) { + dev_warn(wm831x->dev, "Security key had non-zero value %x\n", + ret); + wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + } + wm831x->locked = 1; + + if (pdata && pdata->pre_init) { + ret = pdata->pre_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "pre_init() failed: %d\n", ret); + goto err; + } + } + + ret = wm831x_irq_init(wm831x, irq); + if (ret != 0) + goto err; + + /* The core device is up, instantiate the subdevices. */ + switch (parent) { + case WM8310: + ret = mfd_add_devices(wm831x->dev, -1, + wm8310_devs, ARRAY_SIZE(wm8310_devs), + NULL, 0); + break; + + case WM8311: + ret = mfd_add_devices(wm831x->dev, -1, + wm8311_devs, ARRAY_SIZE(wm8311_devs), + NULL, 0); + break; + + case WM8312: + ret = mfd_add_devices(wm831x->dev, -1, + wm8312_devs, ARRAY_SIZE(wm8312_devs), + NULL, 0); + break; + + default: + /* If this happens the bus probe function is buggy */ + BUG(); + } + + if (ret != 0) { + dev_err(wm831x->dev, "Failed to add children\n"); + goto err_irq; + } + + if (pdata && pdata->backlight) { + /* Treat errors as non-critical */ + ret = mfd_add_devices(wm831x->dev, -1, backlight_devs, + ARRAY_SIZE(backlight_devs), NULL, 0); + if (ret < 0) + dev_err(wm831x->dev, "Failed to add backlight: %d\n", + ret); + } + + wm831x_otp_init(wm831x); + + if (pdata && pdata->post_init) { + ret = pdata->post_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "post_init() failed: %d\n", ret); + goto err_irq; + } + } + + return 0; + +err_irq: + wm831x_irq_exit(wm831x); +err: + mfd_remove_devices(wm831x->dev); + kfree(wm831x); + return ret; +} + +static void wm831x_device_exit(struct wm831x *wm831x) +{ + wm831x_otp_exit(wm831x); + mfd_remove_devices(wm831x->dev); + wm831x_irq_exit(wm831x); + kfree(wm831x); +} + +static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = wm831x->control_data; + int ret; + u16 r = cpu_to_be16(reg); + + ret = i2c_master_send(i2c, (unsigned char *)&r, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + ret = i2c_master_recv(i2c, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; +} + +/* Currently we allocate the write buffer on the stack; this is OK for + * small writes - if we need to do large writes this will need to be + * revised. + */ +static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + struct i2c_client *i2c = wm831x->control_data; + unsigned char msg[bytes + 2]; + int ret; + + reg = cpu_to_be16(reg); + memcpy(&msg[0], ®, 2); + memcpy(&msg[2], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 2); + if (ret < 0) + return ret; + if (ret < bytes + 2) + return -EIO; + + return 0; +} + +static int wm831x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm831x *wm831x; + + wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL); + if (wm831x == NULL) { + kfree(i2c); + return -ENOMEM; + } + + i2c_set_clientdata(i2c, wm831x); + wm831x->dev = &i2c->dev; + wm831x->control_data = i2c; + wm831x->read_dev = wm831x_i2c_read_device; + wm831x->write_dev = wm831x_i2c_write_device; + + return wm831x_device_init(wm831x, id->driver_data, i2c->irq); +} + +static int wm831x_i2c_remove(struct i2c_client *i2c) +{ + struct wm831x *wm831x = i2c_get_clientdata(i2c); + + wm831x_device_exit(wm831x); + + return 0; +} + +static const struct i2c_device_id wm831x_i2c_id[] = { + { "wm8310", WM8310 }, + { "wm8311", WM8311 }, + { "wm8312", WM8312 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); + + +static struct i2c_driver wm831x_i2c_driver = { + .driver = { + .name = "wm831x", + .owner = THIS_MODULE, + }, + .probe = wm831x_i2c_probe, + .remove = wm831x_i2c_remove, + .id_table = wm831x_i2c_id, +}; + +static int __init wm831x_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&wm831x_i2c_driver); + if (ret != 0) + pr_err("Failed to register wm831x I2C driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm831x_i2c_init); + +static void __exit wm831x_i2c_exit(void) +{ + i2c_del_driver(&wm831x_i2c_driver); +} +module_exit(wm831x_i2c_exit); + +MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown"); diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c new file mode 100644 index 000000000000..d3015dfb9134 --- /dev/null +++ b/drivers/mfd/wm831x-irq.c @@ -0,0 +1,559 @@ +/* + * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/interrupt.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> + +#include <linux/delay.h> + +/* + * Since generic IRQs don't currently support interrupt controllers on + * interrupt driven buses we don't use genirq but instead provide an + * interface that looks very much like the standard ones. This leads + * to some bodges, including storing interrupt handler information in + * the static irq_data table we use to look up the data for individual + * interrupts, but hopefully won't last too long. + */ + +struct wm831x_irq_data { + int primary; + int reg; + int mask; + irq_handler_t handler; + void *handler_data; +}; + +static struct wm831x_irq_data wm831x_irqs[] = { + [WM831X_IRQ_TEMP_THW] = { + .primary = WM831X_TEMP_INT, + .reg = 1, + .mask = WM831X_TEMP_THW_EINT, + }, + [WM831X_IRQ_GPIO_1] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP1_EINT, + }, + [WM831X_IRQ_GPIO_2] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP2_EINT, + }, + [WM831X_IRQ_GPIO_3] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP3_EINT, + }, + [WM831X_IRQ_GPIO_4] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP4_EINT, + }, + [WM831X_IRQ_GPIO_5] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP5_EINT, + }, + [WM831X_IRQ_GPIO_6] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP6_EINT, + }, + [WM831X_IRQ_GPIO_7] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP7_EINT, + }, + [WM831X_IRQ_GPIO_8] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP8_EINT, + }, + [WM831X_IRQ_GPIO_9] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP9_EINT, + }, + [WM831X_IRQ_GPIO_10] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP10_EINT, + }, + [WM831X_IRQ_GPIO_11] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP11_EINT, + }, + [WM831X_IRQ_GPIO_12] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP12_EINT, + }, + [WM831X_IRQ_GPIO_13] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP13_EINT, + }, + [WM831X_IRQ_GPIO_14] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP14_EINT, + }, + [WM831X_IRQ_GPIO_15] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP15_EINT, + }, + [WM831X_IRQ_GPIO_16] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP16_EINT, + }, + [WM831X_IRQ_ON] = { + .primary = WM831X_ON_PIN_INT, + .reg = 1, + .mask = WM831X_ON_PIN_EINT, + }, + [WM831X_IRQ_PPM_SYSLO] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_SYSLO_EINT, + }, + [WM831X_IRQ_PPM_PWR_SRC] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_PWR_SRC_EINT, + }, + [WM831X_IRQ_PPM_USB_CURR] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_USB_CURR_EINT, + }, + [WM831X_IRQ_WDOG_TO] = { + .primary = WM831X_WDOG_INT, + .reg = 1, + .mask = WM831X_WDOG_TO_EINT, + }, + [WM831X_IRQ_RTC_PER] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_PER_EINT, + }, + [WM831X_IRQ_RTC_ALM] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_ALM_EINT, + }, + [WM831X_IRQ_CHG_BATT_HOT] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_HOT_EINT, + }, + [WM831X_IRQ_CHG_BATT_COLD] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_COLD_EINT, + }, + [WM831X_IRQ_CHG_BATT_FAIL] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_FAIL_EINT, + }, + [WM831X_IRQ_CHG_OV] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_OV_EINT, + }, + [WM831X_IRQ_CHG_END] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_END_EINT, + }, + [WM831X_IRQ_CHG_TO] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_TO_EINT, + }, + [WM831X_IRQ_CHG_MODE] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_MODE_EINT, + }, + [WM831X_IRQ_CHG_START] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_START_EINT, + }, + [WM831X_IRQ_TCHDATA] = { + .primary = WM831X_TCHDATA_INT, + .reg = 1, + .mask = WM831X_TCHDATA_EINT, + }, + [WM831X_IRQ_TCHPD] = { + .primary = WM831X_TCHPD_INT, + .reg = 1, + .mask = WM831X_TCHPD_EINT, + }, + [WM831X_IRQ_AUXADC_DATA] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DATA_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP1] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP1_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP2] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP2_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP3] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP3_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP4] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP4_EINT, + }, + [WM831X_IRQ_CS1] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS1_EINT, + }, + [WM831X_IRQ_CS2] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS2_EINT, + }, + [WM831X_IRQ_HC_DC1] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC1_EINT, + }, + [WM831X_IRQ_HC_DC2] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC2_EINT, + }, + [WM831X_IRQ_UV_LDO1] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO1_EINT, + }, + [WM831X_IRQ_UV_LDO2] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO2_EINT, + }, + [WM831X_IRQ_UV_LDO3] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO3_EINT, + }, + [WM831X_IRQ_UV_LDO4] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO4_EINT, + }, + [WM831X_IRQ_UV_LDO5] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO5_EINT, + }, + [WM831X_IRQ_UV_LDO6] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO6_EINT, + }, + [WM831X_IRQ_UV_LDO7] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO7_EINT, + }, + [WM831X_IRQ_UV_LDO8] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO8_EINT, + }, + [WM831X_IRQ_UV_LDO9] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO9_EINT, + }, + [WM831X_IRQ_UV_LDO10] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO10_EINT, + }, + [WM831X_IRQ_UV_DC1] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC1_EINT, + }, + [WM831X_IRQ_UV_DC2] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC2_EINT, + }, + [WM831X_IRQ_UV_DC3] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC3_EINT, + }, + [WM831X_IRQ_UV_DC4] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC4_EINT, + }, +}; + +static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg; +} + +static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg; +} + +static void __wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_enable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_enable_irq); + +static void __wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_disable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_disable_irq); + +int wm831x_request_irq(struct wm831x *wm831x, + unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, + void *dev) +{ + int ret = 0; + + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return -EINVAL; + + mutex_lock(&wm831x->irq_lock); + + if (wm831x_irqs[irq].handler) { + dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq); + ret = -EINVAL; + goto out; + } + + wm831x_irqs[irq].handler = handler; + wm831x_irqs[irq].handler_data = dev; + + __wm831x_enable_irq(wm831x, irq); + +out: + mutex_unlock(&wm831x->irq_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_request_irq); + +void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data) +{ + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return; + + mutex_lock(&wm831x->irq_lock); + + wm831x_irqs[irq].handler = NULL; + wm831x_irqs[irq].handler_data = NULL; + + __wm831x_disable_irq(wm831x, irq); + + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_free_irq); + + +static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + if (irq_data->handler) { + irq_data->handler(irq, irq_data->handler_data); + wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data), + irq_data->mask); + } else { + dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq); + __wm831x_disable_irq(wm831x, irq); + } +} + +/* Main interrupt handling occurs in a workqueue since we need + * interrupts enabled to interact with the chip. */ +static void wm831x_irq_worker(struct work_struct *work) +{ + struct wm831x *wm831x = container_of(work, struct wm831x, irq_work); + unsigned int i; + int primary; + int status_regs[5]; + int read[5] = { 0 }; + int *status; + + primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS); + if (primary < 0) { + dev_err(wm831x->dev, "Failed to read system interrupt: %d\n", + primary); + goto out; + } + + mutex_lock(&wm831x->irq_lock); + + for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) { + int offset = wm831x_irqs[i].reg - 1; + + if (!(primary & wm831x_irqs[i].primary)) + continue; + + status = &status_regs[offset]; + + /* Hopefully there should only be one register to read + * each time otherwise we ought to do a block read. */ + if (!read[offset]) { + *status = wm831x_reg_read(wm831x, + irq_data_to_status_reg(&wm831x_irqs[i])); + if (*status < 0) { + dev_err(wm831x->dev, + "Failed to read IRQ status: %d\n", + *status); + goto out_lock; + } + + /* Mask out the disabled IRQs */ + *status &= ~wm831x->irq_masks[offset]; + read[offset] = 1; + } + + if (*status & wm831x_irqs[i].mask) + wm831x_handle_irq(wm831x, i, *status); + } + +out_lock: + mutex_unlock(&wm831x->irq_lock); +out: + enable_irq(wm831x->irq); +} + + +static irqreturn_t wm831x_cpu_irq(int irq, void *data) +{ + struct wm831x *wm831x = data; + + /* Shut the interrupt to the CPU up and schedule the actual + * handler; we can't check that the IRQ is asserted. */ + disable_irq_nosync(irq); + + queue_work(wm831x->irq_wq, &wm831x->irq_work); + + return IRQ_HANDLED; +} + +int wm831x_irq_init(struct wm831x *wm831x, int irq) +{ + int i, ret; + + if (!irq) { + dev_warn(wm831x->dev, + "No interrupt specified - functionality limited\n"); + return 0; + } + + + wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq"); + if (!wm831x->irq_wq) { + dev_err(wm831x->dev, "Failed to allocate IRQ worker\n"); + return -ESRCH; + } + + wm831x->irq = irq; + mutex_init(&wm831x->irq_lock); + INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); + + /* Mask the individual interrupt sources */ + for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) { + wm831x->irq_masks[i] = 0xffff; + wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i, + 0xffff); + } + + /* Enable top level interrupts, we mask at secondary level */ + wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0); + + /* We're good to go. We set IRQF_SHARED since there's a + * chance the driver will interoperate with another driver but + * the need to disable the IRQ while handing via I2C/SPI means + * that this may break and performance will be impacted. If + * this does happen it's a hardware design issue and the only + * other alternative would be polling. + */ + ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED, + "wm831x", wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n", + irq, ret); + return ret; + } + + return 0; +} + +void wm831x_irq_exit(struct wm831x *wm831x) +{ + if (wm831x->irq) + free_irq(wm831x->irq, wm831x); +} diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c new file mode 100644 index 000000000000..f742745ff354 --- /dev/null +++ b/drivers/mfd/wm831x-otp.c @@ -0,0 +1,83 @@ +/* + * wm831x-otp.c -- OTP for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/otp.h> + +/* In bytes */ +#define WM831X_UNIQUE_ID_LEN 16 + +/* Read the unique ID from the chip into id */ +static int wm831x_unique_id_read(struct wm831x *wm831x, char *id) +{ + int i, val; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) { + val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i); + if (val < 0) + return val; + + id[i * 2] = (val >> 8) & 0xff; + id[(i * 2) + 1] = val & 0xff; + } + + return 0; +} + +static ssize_t wm831x_unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x *wm831x = dev_get_drvdata(dev); + int i, rval; + char id[WM831X_UNIQUE_ID_LEN]; + ssize_t ret = 0; + + rval = wm831x_unique_id_read(wm831x, id); + if (rval < 0) + return 0; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++) + ret += sprintf(&buf[ret], "%02x", buf[i]); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL); + +int wm831x_otp_init(struct wm831x *wm831x) +{ + int ret; + + ret = device_create_file(wm831x->dev, &dev_attr_unique_id); + if (ret != 0) + dev_err(wm831x->dev, "Unique ID attribute not created: %d\n", + ret); + + return ret; +} + +void wm831x_otp_exit(struct wm831x *wm831x) +{ + device_remove_file(wm831x->dev, &dev_attr_unique_id); +} + diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fe24079387c5..ba27c9dc1ad3 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq) } /* - * wm8350_irq_worker actually handles the interrupts. Since all + * This is a threaded IRQ handler so can access I2C/SPI. Since all * interrupts are clear on read the IRQ line will be reasserted and * the physical IRQ will be handled again if another interrupt is * asserted while we run - in the normal course of events this is a * rare occurrence so we save I2C/SPI reads. */ -static void wm8350_irq_worker(struct work_struct *work) +static irqreturn_t wm8350_irq(int irq, void *data) { - struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work); + struct wm8350 *wm8350 = data; u16 level_one, status1, status2, comp; /* TODO: Use block reads to improve performance? */ @@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work) } } - enable_irq(wm8350->chip_irq); -} - -static irqreturn_t wm8350_irq(int irq, void *data) -{ - struct wm8350 *wm8350 = data; - - disable_irq_nosync(irq); - schedule_work(&wm8350->irq_work); - return IRQ_HANDLED; } @@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); - INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); if (irq) { - int flags = 0; + int flags = IRQF_ONESHOT; if (pdata && pdata->irq_high) { flags |= IRQF_TRIGGER_HIGH; @@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, WM8350_IRQ_POL); } - ret = request_irq(irq, wm8350_irq, flags, - "wm8350", wm8350); + ret = request_threaded_irq(irq, NULL, wm8350_irq, flags, + "wm8350", wm8350); if (ret != 0) { dev_err(wm8350->dev, "Failed to request IRQ: %d\n", ret); @@ -1472,6 +1461,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, &(wm8350->codec.pdev)); wm8350_client_dev_register(wm8350, "wm8350-gpio", &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-hwmon", + &(wm8350->hwmon.pdev)); wm8350_client_dev_register(wm8350, "wm8350-power", &(wm8350->power.pdev)); wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); @@ -1498,11 +1489,11 @@ void wm8350_device_exit(struct wm8350 *wm8350) platform_device_unregister(wm8350->wdt.pdev); platform_device_unregister(wm8350->rtc.pdev); platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->hwmon.pdev); platform_device_unregister(wm8350->gpio.pdev); platform_device_unregister(wm8350->codec.pdev); free_irq(wm8350->chip_irq, wm8350); - flush_work(&wm8350->irq_work); kfree(wm8350->reg_cache); } EXPORT_SYMBOL_GPL(wm8350_device_exit); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f4317798e47c..2dc42bbf6fe9 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -82,6 +82,13 @@ config REGULATOR_TWL4030 This driver supports the voltage regulators provided by this family of companion chips. +config REGULATOR_WM831X + tristate "Wolfson Microelcronics WM831x PMIC regulators" + depends on MFD_WM831X + help + Support the voltage and current regulators of the WM831x series + of PMIC devices. + config REGULATOR_WM8350 tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" depends on MFD_WM8350 @@ -117,4 +124,28 @@ config REGULATOR_LP3971 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC +config REGULATOR_PCAP + tristate "PCAP2 regulator driver" + depends on EZX_PCAP + help + This driver provides support for the voltage regulators of the + PCAP2 PMIC. + +config REGULATOR_MC13783 + tristate "Support regulators on Freescale MC13783 PMIC" + depends on MFD_MC13783 + help + Say y here to support the regulators found on the Freescale MC13783 + PMIC. + +config REGULATOR_AB3100 + tristate "ST-Ericsson AB3100 Regulator functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + These regulators correspond to functionality in the + AB3100 analog baseband dealing with power regulators + for the system. + endif + diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4d762c4cccfd..768b3316d6eb 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,9 +12,15 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o +obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o +obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c new file mode 100644 index 000000000000..49aeee823a25 --- /dev/null +++ b/drivers/regulator/ab3100.c @@ -0,0 +1,700 @@ +/* + * drivers/regulator/ab3100.c + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Low-level control of the AB3100 IC Low Dropout (LDO) + * regulators, external regulator and buck converter + * Author: Mattias Wallin <mattias.wallin@stericsson.com> + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/ab3100.h> + +/* LDO registers and some handy masking definitions for AB3100 */ +#define AB3100_LDO_A 0x40 +#define AB3100_LDO_C 0x41 +#define AB3100_LDO_D 0x42 +#define AB3100_LDO_E 0x43 +#define AB3100_LDO_E_SLEEP 0x44 +#define AB3100_LDO_F 0x45 +#define AB3100_LDO_G 0x46 +#define AB3100_LDO_H 0x47 +#define AB3100_LDO_H_SLEEP_MODE 0 +#define AB3100_LDO_H_SLEEP_EN 2 +#define AB3100_LDO_ON 4 +#define AB3100_LDO_H_VSEL_AC 5 +#define AB3100_LDO_K 0x48 +#define AB3100_LDO_EXT 0x49 +#define AB3100_BUCK 0x4A +#define AB3100_BUCK_SLEEP 0x4B +#define AB3100_REG_ON_MASK 0x10 + +/** + * struct ab3100_regulator + * A struct passed around the individual regulator functions + * @platform_device: platform device holding this regulator + * @ab3100: handle to the AB3100 parent chip + * @plfdata: AB3100 platform data passed in at probe time + * @regreg: regulator register number in the AB3100 + * @fixed_voltage: a fixed voltage for this regulator, if this + * 0 the voltages array is used instead. + * @typ_voltages: an array of available typical voltages for + * this regulator + * @voltages_len: length of the array of available voltages + */ +struct ab3100_regulator { + struct regulator_dev *rdev; + struct ab3100 *ab3100; + struct ab3100_platform_data *plfdata; + u8 regreg; + int fixed_voltage; + int const *typ_voltages; + u8 voltages_len; +}; + +/* The order in which registers are initialized */ +static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { + AB3100_LDO_A, + AB3100_LDO_C, + AB3100_LDO_E, + AB3100_LDO_E_SLEEP, + AB3100_LDO_F, + AB3100_LDO_G, + AB3100_LDO_H, + AB3100_LDO_K, + AB3100_LDO_EXT, + AB3100_BUCK, + AB3100_BUCK_SLEEP, + AB3100_LDO_D, +}; + +/* Preset (hardware defined) voltages for these regulators */ +#define LDO_A_VOLTAGE 2750000 +#define LDO_C_VOLTAGE 2650000 +#define LDO_D_VOLTAGE 2650000 + +static const int const ldo_e_buck_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 900000, +}; + +static const int const ldo_f_typ_voltages[] = { + 1800000, + 1400000, + 1300000, + 1200000, + 1100000, + 1050000, + 2500000, + 2650000, +}; + +static const int const ldo_g_typ_voltages[] = { + 2850000, + 2750000, + 1800000, + 1500000, +}; + +static const int const ldo_h_typ_voltages[] = { + 2750000, + 1800000, + 1500000, + 1200000, +}; + +static const int const ldo_k_typ_voltages[] = { + 2750000, + 1800000, +}; + + +/* The regulator devices */ +static struct ab3100_regulator +ab3100_regulators[AB3100_NUM_REGULATORS] = { + { + .regreg = AB3100_LDO_A, + .fixed_voltage = LDO_A_VOLTAGE, + }, + { + .regreg = AB3100_LDO_C, + .fixed_voltage = LDO_C_VOLTAGE, + }, + { + .regreg = AB3100_LDO_D, + .fixed_voltage = LDO_D_VOLTAGE, + }, + { + .regreg = AB3100_LDO_E, + .typ_voltages = ldo_e_buck_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages), + }, + { + .regreg = AB3100_LDO_F, + .typ_voltages = ldo_f_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_f_typ_voltages), + }, + { + .regreg = AB3100_LDO_G, + .typ_voltages = ldo_g_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_g_typ_voltages), + }, + { + .regreg = AB3100_LDO_H, + .typ_voltages = ldo_h_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_h_typ_voltages), + }, + { + .regreg = AB3100_LDO_K, + .typ_voltages = ldo_k_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_k_typ_voltages), + }, + { + .regreg = AB3100_LDO_EXT, + /* No voltages for the external regulator */ + }, + { + .regreg = AB3100_BUCK, + .typ_voltages = ldo_e_buck_typ_voltages, + .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages), + }, +}; + +/* + * General functions for enable, disable and is_enabled used for + * LDO: A,C,E,F,G,H,K,EXT and BUCK + */ +static int ab3100_enable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int err; + u8 regval; + + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_warn(®->dev, "failed to get regid %d value\n", + abreg->regreg); + return err; + } + + /* The regulator is already on, no reason to go further */ + if (regval & AB3100_REG_ON_MASK) + return 0; + + regval |= AB3100_REG_ON_MASK; + + err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg, + regval); + if (err) { + dev_warn(®->dev, "failed to set regid %d value\n", + abreg->regreg); + return err; + } + + /* Per-regulator power on delay from spec */ + switch (abreg->regreg) { + case AB3100_LDO_A: /* Fallthrough */ + case AB3100_LDO_C: /* Fallthrough */ + case AB3100_LDO_D: /* Fallthrough */ + case AB3100_LDO_E: /* Fallthrough */ + case AB3100_LDO_H: /* Fallthrough */ + case AB3100_LDO_K: + udelay(200); + break; + case AB3100_LDO_F: + udelay(600); + break; + case AB3100_LDO_G: + udelay(400); + break; + case AB3100_BUCK: + mdelay(1); + break; + default: + break; + } + + return 0; +} + +static int ab3100_disable_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int err; + u8 regval; + + /* + * LDO D is a special regulator. When it is disabled, the entire + * system is shut down. So this is handled specially. + */ + if (abreg->regreg == AB3100_LDO_D) { + int i; + + dev_info(®->dev, "disabling LDO D - shut down system\n"); + /* + * Set regulators to default values, ignore any errors, + * we're going DOWN + */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + (void) ab3100_set_register_interruptible(abreg->ab3100, + ab3100_reg_init_order[i], + abreg->plfdata->reg_initvals[i]); + } + + /* Setting LDO D to 0x00 cuts the power to the SoC */ + return ab3100_set_register_interruptible(abreg->ab3100, + AB3100_LDO_D, 0x00U); + + } + + /* + * All other regulators are handled here + */ + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + regval &= ~AB3100_REG_ON_MASK; + return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg, + regval); +} + +static int ab3100_is_enabled_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + + err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg, + ®val); + if (err) { + dev_err(®->dev, "unable to get register 0x%x\n", + abreg->regreg); + return err; + } + + return regval & AB3100_REG_ON_MASK; +} + +static int ab3100_list_voltage_regulator(struct regulator_dev *reg, + unsigned selector) +{ + struct ab3100_regulator *abreg = reg->reg_data; + + if (selector > abreg->voltages_len) + return -EINVAL; + return abreg->typ_voltages[selector]; +} + +static int ab3100_get_voltage_regulator(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + + /* Return the voltage for fixed regulators immediately */ + if (abreg->fixed_voltage) + return abreg->fixed_voltage; + + /* + * For variable types, read out setting and index into + * supplied voltage list. + */ + err = ab3100_get_register_interruptible(abreg->ab3100, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator value in register %02x\n", + abreg->regreg); + return err; + } + + /* The 3 highest bits index voltages */ + regval &= 0xE0; + regval >>= 5; + + if (regval > abreg->voltages_len) { + dev_err(®->dev, + "regulator register %02x contains an illegal voltage setting\n", + abreg->regreg); + return -EINVAL; + } + + return abreg->typ_voltages[regval]; +} + +static int ab3100_get_best_voltage_index(struct regulator_dev *reg, + int min_uV, int max_uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + int i; + int bestmatch; + int bestindex; + + /* + * Locate the minimum voltage fitting the criteria on + * this regulator. The switchable voltages are not + * in strict falling order so we need to check them + * all for the best match. + */ + bestmatch = INT_MAX; + bestindex = -1; + for (i = 0; i < abreg->voltages_len; i++) { + if (abreg->typ_voltages[i] <= max_uV && + abreg->typ_voltages[i] >= min_uV && + abreg->typ_voltages[i] < bestmatch) { + bestmatch = abreg->typ_voltages[i]; + bestindex = i; + } + } + + if (bestindex < 0) { + dev_warn(®->dev, "requested %d<=x<=%d uV, out of range!\n", + min_uV, max_uV); + return -EINVAL; + } + return bestindex; +} + +static int ab3100_set_voltage_regulator(struct regulator_dev *reg, + int min_uV, int max_uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + int bestindex; + + bestindex = ab3100_get_best_voltage_index(reg, min_uV, max_uV); + if (bestindex < 0) + return bestindex; + + err = ab3100_get_register_interruptible(abreg->ab3100, + abreg->regreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + abreg->regreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (bestindex << 5); + + err = ab3100_set_register_interruptible(abreg->ab3100, + abreg->regreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg, + int uV) +{ + struct ab3100_regulator *abreg = reg->reg_data; + u8 regval; + int err; + int bestindex; + u8 targetreg; + + if (abreg->regreg == AB3100_LDO_E) + targetreg = AB3100_LDO_E_SLEEP; + else if (abreg->regreg == AB3100_BUCK) + targetreg = AB3100_BUCK_SLEEP; + else + return -EINVAL; + + /* LDO E and BUCK have special suspend voltages you can set */ + bestindex = ab3100_get_best_voltage_index(reg, uV, uV); + + err = ab3100_get_register_interruptible(abreg->ab3100, + targetreg, ®val); + if (err) { + dev_warn(®->dev, + "failed to get regulator register %02x\n", + targetreg); + return err; + } + + /* The highest three bits control the variable regulators */ + regval &= ~0xE0; + regval |= (bestindex << 5); + + err = ab3100_set_register_interruptible(abreg->ab3100, + targetreg, regval); + if (err) + dev_warn(®->dev, "failed to set regulator register %02x\n", + abreg->regreg); + + return err; +} + +/* + * The external regulator can just define a fixed voltage. + */ +static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) +{ + struct ab3100_regulator *abreg = reg->reg_data; + + return abreg->plfdata->external_voltage; +} + +static struct regulator_ops regulator_ops_fixed = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, +}; + +static struct regulator_ops regulator_ops_variable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage = ab3100_set_voltage_regulator, + .list_voltage = ab3100_list_voltage_regulator, +}; + +static struct regulator_ops regulator_ops_variable_sleepable = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator, + .set_voltage = ab3100_set_voltage_regulator, + .set_suspend_voltage = ab3100_set_suspend_voltage_regulator, + .list_voltage = ab3100_list_voltage_regulator, +}; + +/* + * LDO EXT is an external regulator so it is really + * not possible to set any voltage locally here, AB3100 + * is an on/off switch plain an simple. The external + * voltage is defined in the board set-up if any. + */ +static struct regulator_ops regulator_ops_external = { + .enable = ab3100_enable_regulator, + .disable = ab3100_disable_regulator, + .is_enabled = ab3100_is_enabled_regulator, + .get_voltage = ab3100_get_voltage_regulator_external, +}; + +static struct regulator_desc +ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { + { + .name = "LDO_A", + .id = AB3100_LDO_A, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_C", + .id = AB3100_LDO_C, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_D", + .id = AB3100_LDO_D, + .ops = ®ulator_ops_fixed, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_E", + .id = AB3100_LDO_E, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_F", + .id = AB3100_LDO_F, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_G", + .id = AB3100_LDO_G, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_H", + .id = AB3100_LDO_H, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_K", + .id = AB3100_LDO_K, + .ops = ®ulator_ops_variable, + .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, + { + .name = "LDO_EXT", + .id = AB3100_LDO_EXT, + .ops = ®ulator_ops_external, + .type = REGULATOR_VOLTAGE, + }, + { + .name = "BUCK", + .id = AB3100_BUCK, + .ops = ®ulator_ops_variable_sleepable, + .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .type = REGULATOR_VOLTAGE, + }, +}; + +/* + * NOTE: the following functions are regulators pluralis - it is the + * binding to the AB3100 core driver and the parent platform device + * for all the different regulators. + */ + +static int __init ab3100_regulators_probe(struct platform_device *pdev) +{ + struct ab3100_platform_data *plfdata = pdev->dev.platform_data; + struct ab3100 *ab3100 = platform_get_drvdata(pdev); + int err = 0; + u8 data; + int i; + + /* Check chip state */ + err = ab3100_get_register_interruptible(ab3100, + AB3100_LDO_D, &data); + if (err) { + dev_err(&pdev->dev, "could not read initial status of LDO_D\n"); + return err; + } + if (data & 0x10) + dev_notice(&pdev->dev, + "chip is already in active mode (Warm start)\n"); + else + dev_notice(&pdev->dev, + "chip is in inactive mode (Cold start)\n"); + + /* Set up regulators */ + for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { + err = ab3100_set_register_interruptible(ab3100, + ab3100_reg_init_order[i], + plfdata->reg_initvals[i]); + if (err) { + dev_err(&pdev->dev, "regulator initialization failed with error %d\n", + err); + return err; + } + } + + if (err) { + dev_err(&pdev->dev, + "LDO D regulator initialization failed with error %d\n", + err); + return err; + } + + /* Register the regulators */ + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct ab3100_regulator *reg = &ab3100_regulators[i]; + struct regulator_dev *rdev; + + /* + * Initialize per-regulator struct. + * Inherit platform data, this comes down from the + * i2c boarddata, from the machine. So if you want to + * see what it looks like for a certain machine, go + * into the machine I2C setup. + */ + reg->ab3100 = ab3100; + reg->plfdata = plfdata; + + /* + * Register the regulator, pass around + * the ab3100_regulator struct + */ + rdev = regulator_register(&ab3100_regulator_desc[i], + &pdev->dev, + &plfdata->reg_constraints[i], + reg); + + if (IS_ERR(rdev)) { + err = PTR_ERR(rdev); + dev_err(&pdev->dev, + "%s: failed to register regulator %s err %d\n", + __func__, ab3100_regulator_desc[i].name, + err); + i--; + /* remove the already registered regulators */ + while (i > 0) { + regulator_unregister(ab3100_regulators[i].rdev); + i--; + } + return err; + } + + /* Then set a pointer back to the registered regulator */ + reg->rdev = rdev; + } + + return 0; +} + +static int __exit ab3100_regulators_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < AB3100_NUM_REGULATORS; i++) { + struct ab3100_regulator *reg = &ab3100_regulators[i]; + + regulator_unregister(reg->rdev); + } + return 0; +} + +static struct platform_driver ab3100_regulators_driver = { + .driver = { + .name = "ab3100-regulators", + .owner = THIS_MODULE, + }, + .probe = ab3100_regulators_probe, + .remove = __exit_p(ab3100_regulators_remove), +}; + +static __init int ab3100_regulators_init(void) +{ + return platform_driver_register(&ab3100_regulators_driver); +} + +static __exit void ab3100_regulators_exit(void) +{ + platform_driver_register(&ab3100_regulators_driver); +} + +subsys_initcall(ab3100_regulators_init); +module_exit(ab3100_regulators_exit); + +MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 Regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ab3100-regulators"); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 98c3a74e9949..91ba9bfaa706 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1864,6 +1864,30 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev, } EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); +/** + * regulator_mode_to_status - convert a regulator mode into a status + * + * @mode: Mode to convert + * + * Convert a regulator mode into a status. + */ +int regulator_mode_to_status(unsigned int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return REGULATOR_STATUS_FAST; + case REGULATOR_MODE_NORMAL: + return REGULATOR_STATUS_NORMAL; + case REGULATOR_MODE_IDLE: + return REGULATOR_STATUS_IDLE; + case REGULATOR_STATUS_STANDBY: + return REGULATOR_STATUS_STANDBY; + default: + return 0; + } +} +EXPORT_SYMBOL_GPL(regulator_mode_to_status); + /* * To avoid cluttering sysfs (and memory) with useless state, only * create attributes that can be meaningfully displayed. diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c new file mode 100644 index 000000000000..710211f67449 --- /dev/null +++ b/drivers/regulator/mc13783.c @@ -0,0 +1,410 @@ +/* + * Regulator Driver for Freescale MC13783 PMIC + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> + +struct mc13783_regulator { + struct regulator_desc desc; + int reg; + int enable_bit; +}; + +static struct regulator_ops mc13783_regulator_ops; + +static struct mc13783_regulator mc13783_regulators[] = { + [MC13783_SW_SW3] = { + .desc = { + .name = "SW_SW3", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_SW_SW3, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_SWITCHERS_5, + .enable_bit = MC13783_SWCTRL_SW3_EN, + }, + [MC13783_SW_PLL] = { + .desc = { + .name = "SW_PLL", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_SW_PLL, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_SWITCHERS_4, + .enable_bit = MC13783_SWCTRL_PLL_EN, + }, + [MC13783_REGU_VAUDIO] = { + .desc = { + .name = "REGU_VAUDIO", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VAUDIO, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VAUDIO_EN, + }, + [MC13783_REGU_VIOHI] = { + .desc = { + .name = "REGU_VIOHI", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VIOHI, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VIOHI_EN, + }, + [MC13783_REGU_VIOLO] = { + .desc = { + .name = "REGU_VIOLO", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VIOLO, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VIOLO_EN, + }, + [MC13783_REGU_VDIG] = { + .desc = { + .name = "REGU_VDIG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VDIG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VDIG_EN, + }, + [MC13783_REGU_VGEN] = { + .desc = { + .name = "REGU_VGEN", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VGEN, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VGEN_EN, + }, + [MC13783_REGU_VRFDIG] = { + .desc = { + .name = "REGU_VRFDIG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFDIG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFDIG_EN, + }, + [MC13783_REGU_VRFREF] = { + .desc = { + .name = "REGU_VRFREF", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFREF, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFREF_EN, + }, + [MC13783_REGU_VRFCP] = { + .desc = { + .name = "REGU_VRFCP", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFCP, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_0, + .enable_bit = MC13783_REGCTRL_VRFCP_EN, + }, + [MC13783_REGU_VSIM] = { + .desc = { + .name = "REGU_VSIM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VSIM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VSIM_EN, + }, + [MC13783_REGU_VESIM] = { + .desc = { + .name = "REGU_VESIM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VESIM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VESIM_EN, + }, + [MC13783_REGU_VCAM] = { + .desc = { + .name = "REGU_VCAM", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VCAM, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VCAM_EN, + }, + [MC13783_REGU_VRFBG] = { + .desc = { + .name = "REGU_VRFBG", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRFBG, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRFBG_EN, + }, + [MC13783_REGU_VVIB] = { + .desc = { + .name = "REGU_VVIB", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VVIB, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VVIB_EN, + }, + [MC13783_REGU_VRF1] = { + .desc = { + .name = "REGU_VRF1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRF1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRF1_EN, + }, + [MC13783_REGU_VRF2] = { + .desc = { + .name = "REGU_VRF2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VRF2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VRF2_EN, + }, + [MC13783_REGU_VMMC1] = { + .desc = { + .name = "REGU_VMMC1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VMMC1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VMMC1_EN, + }, + [MC13783_REGU_VMMC2] = { + .desc = { + .name = "REGU_VMMC2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_VMMC2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_REGULATOR_MODE_1, + .enable_bit = MC13783_REGCTRL_VMMC2_EN, + }, + [MC13783_REGU_GPO1] = { + .desc = { + .name = "REGU_GPO1", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO1, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO1_EN, + }, + [MC13783_REGU_GPO2] = { + .desc = { + .name = "REGU_GPO2", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO2, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO2_EN, + }, + [MC13783_REGU_GPO3] = { + .desc = { + .name = "REGU_GPO3", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO3, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO3_EN, + }, + [MC13783_REGU_GPO4] = { + .desc = { + .name = "REGU_GPO4", + .ops = &mc13783_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = MC13783_REGU_GPO4, + .owner = THIS_MODULE, + }, + .reg = MC13783_REG_POWER_MISCELLANEOUS, + .enable_bit = MC13783_REGCTRL_GPO4_EN, + }, +}; + +struct mc13783_priv { + struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; + struct mc13783 *mc13783; + struct regulator_dev *regulators[0]; +}; + +static int mc13783_enable(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, + mc13783_regulators[id].enable_bit); +} + +static int mc13783_disable(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, 0); +} + +static int mc13783_is_enabled(struct regulator_dev *rdev) +{ + struct mc13783_priv *priv = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + unsigned int val; + + ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + if (ret) + return ret; + + return (val & mc13783_regulators[id].enable_bit) != 0; +} + +static struct regulator_ops mc13783_regulator_ops = { + .enable = mc13783_enable, + .disable = mc13783_disable, + .is_enabled = mc13783_is_enabled, +}; + +static int __devinit mc13783_regulator_probe(struct platform_device *pdev) +{ + struct mc13783_priv *priv; + struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_init_data *init_data; + int i, ret; + + dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + + priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = mc13783; + + for (i = 0; i < mc13783->num_regulators; i++) { + init_data = &mc13783->regulators[i]; + priv->regulators[i] = regulator_register( + &mc13783_regulators[init_data->id].desc, + &pdev->dev, init_data->init_data, priv); + + if (IS_ERR(priv->regulators[i])) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + mc13783_regulators[i].desc.name); + ret = PTR_ERR(priv->regulators[i]); + goto err; + } + } + + platform_set_drvdata(pdev, priv); + + return 0; +err: + while (--i >= 0) + regulator_unregister(priv->regulators[i]); + + kfree(priv); + + return ret; +} + +static int __devexit mc13783_regulator_remove(struct platform_device *pdev) +{ + struct mc13783_priv *priv = platform_get_drvdata(pdev); + struct mc13783 *mc13783 = priv->mc13783; + int i; + + for (i = 0; i < mc13783->num_regulators; i++) + regulator_unregister(priv->regulators[i]); + + return 0; +} + +static struct platform_driver mc13783_regulator_driver = { + .driver = { + .name = "mc13783-regulator", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mc13783_regulator_remove), +}; + +static int __init mc13783_regulator_init(void) +{ + return platform_driver_probe(&mc13783_regulator_driver, + mc13783_regulator_probe); +} +subsys_initcall(mc13783_regulator_init); + +static void __exit mc13783_regulator_exit(void) +{ + platform_driver_unregister(&mc13783_regulator_driver); +} +module_exit(mc13783_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); +MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c new file mode 100644 index 000000000000..33d7d899e030 --- /dev/null +++ b/drivers/regulator/pcap-regulator.c @@ -0,0 +1,318 @@ +/* + * PCAP2 Regulator Driver + * + * Copyright (c) 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/ezx-pcap.h> + +static const u16 V1_table[] = { + 2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275, +}; + +static const u16 V2_table[] = { + 2500, 2775, +}; + +static const u16 V3_table[] = { + 1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275, +}; + +static const u16 V4_table[] = { + 1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775, +}; + +static const u16 V5_table[] = { + 1875, 2275, 2475, 2775, +}; + +static const u16 V6_table[] = { + 2475, 2775, +}; + +static const u16 V7_table[] = { + 1875, 2775, +}; + +#define V8_table V4_table + +static const u16 V9_table[] = { + 1575, 1875, 2475, 2775, +}; + +static const u16 V10_table[] = { + 5000, +}; + +static const u16 VAUX1_table[] = { + 1875, 2475, 2775, 3000, +}; + +#define VAUX2_table VAUX1_table + +static const u16 VAUX3_table[] = { + 1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000, + 2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600, +}; + +static const u16 VAUX4_table[] = { + 1800, 1800, 3000, 5000, +}; + +static const u16 VSIM_table[] = { + 1875, 3000, +}; + +static const u16 VSIM2_table[] = { + 1875, +}; + +static const u16 VVIB_table[] = { + 1300, 1800, 2000, 3000, +}; + +static const u16 SW1_table[] = { + 900, 950, 1000, 1050, 1100, 1150, 1200, 1250, + 1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250, +}; + +#define SW2_table SW1_table + +static const u16 SW3_table[] = { + 4000, 4500, 5000, 5500, +}; + +struct pcap_regulator { + const u8 reg; + const u8 en; + const u8 index; + const u8 stby; + const u8 lowpwr; + const u8 n_voltages; + const u16 *voltage_table; +}; + +#define NA 0xff + +#define VREG_INFO(_vreg, _reg, _en, _index, _stby, _lowpwr) \ + [_vreg] = { \ + .reg = _reg, \ + .en = _en, \ + .index = _index, \ + .stby = _stby, \ + .lowpwr = _lowpwr, \ + .n_voltages = ARRAY_SIZE(_vreg##_table), \ + .voltage_table = _vreg##_table, \ + } + +static struct pcap_regulator vreg_table[] = { + VREG_INFO(V1, PCAP_REG_VREG1, 1, 2, 18, 0), + VREG_INFO(V2, PCAP_REG_VREG1, 5, 6, 19, 22), + VREG_INFO(V3, PCAP_REG_VREG1, 7, 8, 20, 23), + VREG_INFO(V4, PCAP_REG_VREG1, 11, 12, 21, 24), + /* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */ + VREG_INFO(V5, PCAP_REG_VREG1, 15, 16, 12, 19), + + VREG_INFO(V6, PCAP_REG_VREG2, 1, 2, 14, 20), + VREG_INFO(V7, PCAP_REG_VREG2, 3, 4, 15, 21), + VREG_INFO(V8, PCAP_REG_VREG2, 5, 6, 16, 22), + VREG_INFO(V9, PCAP_REG_VREG2, 9, 10, 17, 23), + VREG_INFO(V10, PCAP_REG_VREG2, 10, NA, 18, 24), + + VREG_INFO(VAUX1, PCAP_REG_AUXVREG, 1, 2, 22, 23), + /* VAUX2 ... VSIM2 STBY and LOWPWR are on PCAP_REG_LOWPWR */ + VREG_INFO(VAUX2, PCAP_REG_AUXVREG, 4, 5, 0, 1), + VREG_INFO(VAUX3, PCAP_REG_AUXVREG, 7, 8, 2, 3), + VREG_INFO(VAUX4, PCAP_REG_AUXVREG, 12, 13, 4, 5), + VREG_INFO(VSIM, PCAP_REG_AUXVREG, 17, 18, NA, 6), + VREG_INFO(VSIM2, PCAP_REG_AUXVREG, 16, NA, NA, 7), + VREG_INFO(VVIB, PCAP_REG_AUXVREG, 19, 20, NA, NA), + + VREG_INFO(SW1, PCAP_REG_SWCTRL, 1, 2, NA, NA), + VREG_INFO(SW2, PCAP_REG_SWCTRL, 6, 7, NA, NA), + /* SW3 STBY is on PCAP_REG_AUXVREG */ + VREG_INFO(SW3, PCAP_REG_SWCTRL, 11, 12, 24, NA), + + /* SWxS used to control SWx voltage on standby */ +/* VREG_INFO(SW1S, PCAP_REG_LOWPWR, NA, 12, NA, NA), + VREG_INFO(SW2S, PCAP_REG_LOWPWR, NA, 20, NA, NA), */ +}; + +static int pcap_regulator_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + int uV; + u8 i; + + /* the regulator doesn't support voltage switching */ + if (vreg->n_voltages == 1) + return -EINVAL; + + for (i = 0; i < vreg->n_voltages; i++) { + /* For V1 the first is not the best match */ + if (i == 0 && rdev_get_id(rdev) == V1) + i = 1; + else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1) + i = 0; + + uV = vreg->voltage_table[i] * 1000; + if (min_uV <= uV && uV <= max_uV) + return ezx_pcap_set_bits(pcap, vreg->reg, + (vreg->n_voltages - 1) << vreg->index, + i << vreg->index); + + if (i == 0 && rdev_get_id(rdev) == V1) + i = vreg->n_voltages - 1; + } + + /* the requested voltage range is not supported by this regulator */ + return -EINVAL; +} + +static int pcap_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + u32 tmp; + int mV; + + if (vreg->n_voltages == 1) + return vreg->voltage_table[0] * 1000; + + ezx_pcap_read(pcap, vreg->reg, &tmp); + tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1)); + mV = vreg->voltage_table[tmp]; + + return mV * 1000; +} + +static int pcap_regulator_enable(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + + if (vreg->en == NA) + return -EINVAL; + + return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 1 << vreg->en); +} + +static int pcap_regulator_disable(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + + if (vreg->en == NA) + return -EINVAL; + + return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 0); +} + +static int pcap_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + void *pcap = rdev_get_drvdata(rdev); + u32 tmp; + + if (vreg->en == NA) + return -EINVAL; + + ezx_pcap_read(pcap, vreg->reg, &tmp); + return (tmp >> vreg->en) & 1; +} + +static int pcap_regulator_list_voltage(struct regulator_dev *rdev, + unsigned int index) +{ + struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)]; + + return vreg->voltage_table[index] * 1000; +} + +static struct regulator_ops pcap_regulator_ops = { + .list_voltage = pcap_regulator_list_voltage, + .set_voltage = pcap_regulator_set_voltage, + .get_voltage = pcap_regulator_get_voltage, + .enable = pcap_regulator_enable, + .disable = pcap_regulator_disable, + .is_enabled = pcap_regulator_is_enabled, +}; + +#define VREG(_vreg) \ + [_vreg] = { \ + .name = #_vreg, \ + .id = _vreg, \ + .n_voltages = ARRAY_SIZE(_vreg##_table), \ + .ops = &pcap_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +static struct regulator_desc pcap_regulators[] = { + VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7), + VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3), + VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2), +}; + +static int __devinit pcap_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + void *pcap = dev_get_drvdata(pdev->dev.parent); + + rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev, + pdev->dev.platform_data, pcap); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + platform_set_drvdata(pdev, rdev); + + return 0; +} + +static int __devexit pcap_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static struct platform_driver pcap_regulator_driver = { + .driver = { + .name = "pcap-regulator", + }, + .probe = pcap_regulator_probe, + .remove = __devexit_p(pcap_regulator_remove), +}; + +static int __init pcap_regulator_init(void) +{ + return platform_driver_register(&pcap_regulator_driver); +} + +static void __exit pcap_regulator_exit(void) +{ + platform_driver_unregister(&pcap_regulator_driver); +} + +subsys_initcall(pcap_regulator_init); +module_exit(pcap_regulator_exit); + +MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>"); +MODULE_DESCRIPTION("PCAP2 Regulator Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c new file mode 100644 index 000000000000..2eefc1a0cf08 --- /dev/null +++ b/drivers/regulator/wm831x-dcdc.c @@ -0,0 +1,862 @@ +/* + * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_BUCKV_MAX_SELECTOR 0x68 +#define WM831X_BUCKP_MAX_SELECTOR 0x66 + +#define WM831X_DCDC_MODE_FAST 0 +#define WM831X_DCDC_MODE_NORMAL 1 +#define WM831X_DCDC_MODE_IDLE 2 +#define WM831X_DCDC_MODE_STANDBY 3 + +#define WM831X_DCDC_MAX_NAME 6 + +/* Register offsets in control block */ +#define WM831X_DCDC_CONTROL_1 0 +#define WM831X_DCDC_CONTROL_2 1 +#define WM831X_DCDC_ON_CONFIG 2 +#define WM831X_DCDC_SLEEP_CONTROL 3 + +/* + * Shared + */ + +struct wm831x_dcdc { + char name[WM831X_DCDC_MAX_NAME]; + struct regulator_desc desc; + int base; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + int reg; + + reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE); + if (reg < 0) + return reg; + + if (reg & mask) + return 1; + else + return 0; +} + +static int wm831x_dcdc_enable(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask); +} + +static int wm831x_dcdc_disable(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0); +} + +static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) + +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT; + + switch (val) { + case WM831X_DCDC_MODE_FAST: + return REGULATOR_MODE_FAST; + case WM831X_DCDC_MODE_NORMAL: + return REGULATOR_MODE_NORMAL; + case WM831X_DCDC_MODE_STANDBY: + return REGULATOR_MODE_STANDBY; + case WM831X_DCDC_MODE_IDLE: + return REGULATOR_MODE_IDLE; + default: + BUG(); + } +} + +static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg, + unsigned int mode) +{ + int val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = WM831X_DCDC_MODE_FAST; + break; + case REGULATOR_MODE_NORMAL: + val = WM831X_DCDC_MODE_NORMAL; + break; + case REGULATOR_MODE_STANDBY: + val = WM831X_DCDC_MODE_STANDBY; + break; + case REGULATOR_MODE_IDLE: + val = WM831X_DCDC_MODE_IDLE; + break; + default: + return -EINVAL; + } + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK, + val << WM831X_DC1_ON_MODE_SHIFT); +} + +static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_dcdc_set_mode_int(wm831x, reg, mode); +} + +static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_dcdc_set_mode_int(wm831x, reg, mode); +} + +static int wm831x_dcdc_get_status(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int ret; + + /* First, check for errors */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); + if (ret < 0) + return ret; + + if (ret & (1 << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d under voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + /* DCDC1 and DCDC2 can additionally detect high voltage/current */ + if (rdev_get_id(rdev) < 2) { + if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d over voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d over current\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + } + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); + if (ret < 0) + return ret; + if (!(ret & (1 << rdev_get_id(rdev)))) + return REGULATOR_STATUS_OFF; + + /* TODO: When we handle hardware control modes so we can report the + * current mode. */ + return REGULATOR_STATUS_ON; +} + +static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data) +{ + struct wm831x_dcdc *dcdc = data; + + regulator_notifier_call_chain(dcdc->regulator, + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) +{ + struct wm831x_dcdc *dcdc = data; + + regulator_notifier_call_chain(dcdc->regulator, + REGULATOR_EVENT_OVER_CURRENT, + NULL); + + return IRQ_HANDLED; +} + +/* + * BUCKV specifics + */ + +static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + if (selector <= 0x8) + return 600000; + if (selector <= WM831X_BUCKV_MAX_SELECTOR) + return 600000 + ((selector - 0x8) * 12500); + return -EINVAL; +} + +static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 vsel; + + if (min_uV < 600000) + vsel = 0; + else if (min_uV <= 1800000) + vsel = ((min_uV - 600000) / 12500) + 8; + else + return -EINVAL; + + if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); +} + +static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); +} + +/* Current limit options */ +static u16 wm831x_dcdc_ilim[] = { + 125, 250, 375, 500, 625, 750, 875, 1000 +}; + +static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; + int i; + + for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { + if (max_uA <= wm831x_dcdc_ilim[i]) + break; + } + if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i); +} + +static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK]; +} + +static struct regulator_ops wm831x_buckv_ops = { + .set_voltage = wm831x_buckv_set_voltage, + .get_voltage = wm831x_buckv_get_voltage, + .list_voltage = wm831x_buckv_list_voltage, + .set_suspend_voltage = wm831x_buckv_set_suspend_voltage, + .set_current_limit = wm831x_buckv_set_current_limit, + .get_current_limit = wm831x_buckv_get_current_limit, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, + .get_mode = wm831x_dcdc_get_mode, + .set_mode = wm831x_dcdc_set_mode, + .set_suspend_mode = wm831x_dcdc_set_suspend_mode, +}; + +static __devinit int wm831x_buckv_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1; + dcdc->desc.ops = &wm831x_buckv_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + irq = platform_get_irq_byname(pdev, "HC"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n", + irq, ret); + goto err_uv; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_uv: + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_buckv_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_buckv_driver = { + .probe = wm831x_buckv_probe, + .remove = __devexit_p(wm831x_buckv_remove), + .driver = { + .name = "wm831x-buckv", + }, +}; + +/* + * BUCKP specifics + */ + +static int wm831x_buckp_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + if (selector <= WM831X_BUCKP_MAX_SELECTOR) + return 850000 + (selector * 25000); + else + return -EINVAL; +} + +static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 vsel; + + if (min_uV <= 34000000) + vsel = (min_uV - 850000) / 25000; + else + return -EINVAL; + + if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel); +} + +static int wm831x_buckp_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + + return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + + return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_buckp_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int val; + + val = wm831x_reg_read(wm831x, reg); + if (val < 0) + return val; + + return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK); +} + +static struct regulator_ops wm831x_buckp_ops = { + .set_voltage = wm831x_buckp_set_voltage, + .get_voltage = wm831x_buckp_get_voltage, + .list_voltage = wm831x_buckp_list_voltage, + .set_suspend_voltage = wm831x_buckp_set_suspend_voltage, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, + .get_mode = wm831x_dcdc_get_mode, + .set_mode = wm831x_dcdc_set_mode, + .set_suspend_mode = wm831x_dcdc_set_suspend_mode, +}; + +static __devinit int wm831x_buckp_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1; + dcdc->desc.ops = &wm831x_buckp_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_buckp_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_buckp_driver = { + .probe = wm831x_buckp_probe, + .remove = __devexit_p(wm831x_buckp_remove), + .driver = { + .name = "wm831x-buckp", + }, +}; + +/* + * DCDC boost convertors + */ + +static int wm831x_boostp_get_status(struct regulator_dev *rdev) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; + int ret; + + /* First, check for errors */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); + if (ret < 0) + return ret; + + if (ret & (1 << rdev_get_id(rdev))) { + dev_dbg(wm831x->dev, "DCDC%d under voltage\n", + rdev_get_id(rdev) + 1); + return REGULATOR_STATUS_ERROR; + } + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); + if (ret < 0) + return ret; + if (ret & (1 << rdev_get_id(rdev))) + return REGULATOR_STATUS_ON; + else + return REGULATOR_STATUS_OFF; +} + +static struct regulator_ops wm831x_boostp_ops = { + .get_status = wm831x_boostp_get_status, + + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, +}; + +static __devinit int wm831x_boostp_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->dcdc); + struct wm831x_dcdc *dcdc; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); + + if (pdata == NULL || pdata->dcdc[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + dcdc->base = res->start; + + snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.ops = &wm831x_boostp_ops; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->dcdc[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, + IRQF_TRIGGER_RISING, dcdc->name, + dcdc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err_regulator: + regulator_unregister(dcdc->regulator); +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_boostp_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + struct wm831x *wm831x = dcdc->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_boostp_driver = { + .probe = wm831x_boostp_probe, + .remove = __devexit_p(wm831x_boostp_remove), + .driver = { + .name = "wm831x-boostp", + }, +}; + +/* + * External Power Enable + * + * These aren't actually DCDCs but look like them in hardware so share + * code. + */ + +#define WM831X_EPE_BASE 6 + +static struct regulator_ops wm831x_epe_ops = { + .is_enabled = wm831x_dcdc_is_enabled, + .enable = wm831x_dcdc_enable, + .disable = wm831x_dcdc_disable, + .get_status = wm831x_dcdc_get_status, +}; + +static __devinit int wm831x_epe_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->epe); + struct wm831x_dcdc *dcdc; + int ret; + + dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1); + + if (pdata == NULL || pdata->epe[id] == NULL) + return -ENODEV; + + dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); + if (dcdc == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + dcdc->wm831x = wm831x; + + /* For current parts this is correct; probably need to revisit + * in future. + */ + snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1); + dcdc->desc.name = dcdc->name; + dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */ + dcdc->desc.ops = &wm831x_epe_ops; + dcdc->desc.type = REGULATOR_VOLTAGE; + dcdc->desc.owner = THIS_MODULE; + + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, + pdata->epe[id], dcdc); + if (IS_ERR(dcdc->regulator)) { + ret = PTR_ERR(dcdc->regulator); + dev_err(wm831x->dev, "Failed to register EPE%d: %d\n", + id + 1, ret); + goto err; + } + + platform_set_drvdata(pdev, dcdc); + + return 0; + +err: + kfree(dcdc); + return ret; +} + +static __devexit int wm831x_epe_remove(struct platform_device *pdev) +{ + struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); + + regulator_unregister(dcdc->regulator); + kfree(dcdc); + + return 0; +} + +static struct platform_driver wm831x_epe_driver = { + .probe = wm831x_epe_probe, + .remove = __devexit_p(wm831x_epe_remove), + .driver = { + .name = "wm831x-epe", + }, +}; + +static int __init wm831x_dcdc_init(void) +{ + int ret; + ret = platform_driver_register(&wm831x_buckv_driver); + if (ret != 0) + pr_err("Failed to register WM831x BUCKV driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_buckp_driver); + if (ret != 0) + pr_err("Failed to register WM831x BUCKP driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_boostp_driver); + if (ret != 0) + pr_err("Failed to register WM831x BOOST driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_epe_driver); + if (ret != 0) + pr_err("Failed to register WM831x EPE driver: %d\n", ret); + + return 0; +} +subsys_initcall(wm831x_dcdc_init); + +static void __exit wm831x_dcdc_exit(void) +{ + platform_driver_unregister(&wm831x_epe_driver); + platform_driver_unregister(&wm831x_boostp_driver); + platform_driver_unregister(&wm831x_buckp_driver); + platform_driver_unregister(&wm831x_buckv_driver); +} +module_exit(wm831x_dcdc_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM831x DC-DC convertor driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-buckv"); +MODULE_ALIAS("platform:wm831x-buckp"); diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c new file mode 100644 index 000000000000..1d8d9879d3a1 --- /dev/null +++ b/drivers/regulator/wm831x-isink.c @@ -0,0 +1,260 @@ +/* + * wm831x-isink.c -- Current sink driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_ISINK_MAX_NAME 7 + +struct wm831x_isink { + char name[WM831X_ISINK_MAX_NAME]; + struct regulator_desc desc; + int reg; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +static int wm831x_isink_enable(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + /* We have a two stage enable: first start the ISINK... */ + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, + WM831X_CS1_ENA); + if (ret != 0) + return ret; + + /* ...then enable drive */ + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, + WM831X_CS1_DRIVE); + if (ret != 0) + wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); + + return ret; + +} + +static int wm831x_isink_disable(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); + if (ret < 0) + return ret; + + return ret; + +} + +static int wm831x_isink_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, isink->reg); + if (ret < 0) + return ret; + + if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) == + (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) + return 1; + else + return 0; +} + +static int wm831x_isink_set_current(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret, i; + + for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) { + int val = wm831x_isinkv_values[i]; + if (min_uA >= val && val <= max_uA) { + ret = wm831x_set_bits(wm831x, isink->reg, + WM831X_CS1_ISEL_MASK, i); + return ret; + } + } + + return -EINVAL; +} + +static int wm831x_isink_get_current(struct regulator_dev *rdev) +{ + struct wm831x_isink *isink = rdev_get_drvdata(rdev); + struct wm831x *wm831x = isink->wm831x; + int ret; + + ret = wm831x_reg_read(wm831x, isink->reg); + if (ret < 0) + return ret; + + ret &= WM831X_CS1_ISEL_MASK; + if (ret > WM831X_ISINK_MAX_ISEL) + ret = WM831X_ISINK_MAX_ISEL; + + return wm831x_isinkv_values[ret]; +} + +static struct regulator_ops wm831x_isink_ops = { + .is_enabled = wm831x_isink_is_enabled, + .enable = wm831x_isink_enable, + .disable = wm831x_isink_disable, + .set_current_limit = wm831x_isink_set_current, + .get_current_limit = wm831x_isink_get_current, +}; + +static irqreturn_t wm831x_isink_irq(int irq, void *data) +{ + struct wm831x_isink *isink = data; + + regulator_notifier_call_chain(isink->regulator, + REGULATOR_EVENT_OVER_CURRENT, + NULL); + + return IRQ_HANDLED; +} + + +static __devinit int wm831x_isink_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + struct wm831x_isink *isink; + int id = pdev->id % ARRAY_SIZE(pdata->isink); + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1); + + if (pdata == NULL || pdata->isink[id] == NULL) + return -ENODEV; + + isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL); + if (isink == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + isink->reg = res->start; + + /* For current parts this is correct; probably need to revisit + * in future. + */ + snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1); + isink->desc.name = isink->name; + isink->desc.id = id; + isink->desc.ops = &wm831x_isink_ops; + isink->desc.type = REGULATOR_CURRENT; + isink->desc.owner = THIS_MODULE; + + isink->regulator = regulator_register(&isink->desc, &pdev->dev, + pdata->isink[id], isink); + if (IS_ERR(isink->regulator)) { + ret = PTR_ERR(isink->regulator); + dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq(pdev, 0); + ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq, + IRQF_TRIGGER_RISING, isink->name, + isink); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, isink); + + return 0; + +err_regulator: + regulator_unregister(isink->regulator); +err: + kfree(isink); + return ret; +} + +static __devexit int wm831x_isink_remove(struct platform_device *pdev) +{ + struct wm831x_isink *isink = platform_get_drvdata(pdev); + struct wm831x *wm831x = isink->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink); + + regulator_unregister(isink->regulator); + kfree(isink); + + return 0; +} + +static struct platform_driver wm831x_isink_driver = { + .probe = wm831x_isink_probe, + .remove = __devexit_p(wm831x_isink_remove), + .driver = { + .name = "wm831x-isink", + }, +}; + +static int __init wm831x_isink_init(void) +{ + int ret; + ret = platform_driver_register(&wm831x_isink_driver); + if (ret != 0) + pr_err("Failed to register WM831x ISINK driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm831x_isink_init); + +static void __exit wm831x_isink_exit(void) +{ + platform_driver_unregister(&wm831x_isink_driver); +} +module_exit(wm831x_isink_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM831x current sink driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-isink"); diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c new file mode 100644 index 000000000000..bb61aede4801 --- /dev/null +++ b/drivers/regulator/wm831x-ldo.c @@ -0,0 +1,852 @@ +/* + * wm831x-ldo.c -- LDO driver for the WM831x series + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/regulator.h> +#include <linux/mfd/wm831x/pdata.h> + +#define WM831X_LDO_MAX_NAME 6 + +#define WM831X_LDO_CONTROL 0 +#define WM831X_LDO_ON_CONTROL 1 +#define WM831X_LDO_SLEEP_CONTROL 2 + +#define WM831X_ALIVE_LDO_ON_CONTROL 0 +#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1 + +struct wm831x_ldo { + char name[WM831X_LDO_MAX_NAME]; + struct regulator_desc desc; + int base; + struct wm831x *wm831x; + struct regulator_dev *regulator; +}; + +/* + * Shared + */ + +static int wm831x_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int reg; + + reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE); + if (reg < 0) + return reg; + + if (reg & mask) + return 1; + else + return 0; +} + +static int wm831x_ldo_enable(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask); +} + +static int wm831x_ldo_disable(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + + return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0); +} + +static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) +{ + struct wm831x_ldo *ldo = data; + + regulator_notifier_call_chain(ldo->regulator, + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + + return IRQ_HANDLED; +} + +/* + * General purpose LDOs + */ + +#define WM831X_GP_LDO_SELECTOR_LOW 0xe +#define WM831X_GP_LDO_MAX_SELECTOR 0x1f + +static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 0.9-1.6V in 50mV steps */ + if (selector <= WM831X_GP_LDO_SELECTOR_LOW) + return 900000 + (selector * 50000); + /* 1.7-3.3V in 50mV steps */ + if (selector <= WM831X_GP_LDO_MAX_SELECTOR) + return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW) + * 100000); + return -EINVAL; +} + +static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + if (min_uV < 900000) + vsel = 0; + else if (min_uV < 1700000) + vsel = ((min_uV - 900000) / 50000); + else + vsel = ((min_uV - 1700000) / 100000) + + WM831X_GP_LDO_SELECTOR_LOW + 1; + + ret = wm831x_gp_ldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel); +} + +static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + + return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; + + return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO1_ON_VSEL_MASK; + + return wm831x_gp_ldo_list_voltage(rdev, ret); +} + +static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + unsigned int ret; + + ret = wm831x_reg_read(wm831x, on_reg); + if (ret < 0) + return 0; + + if (!(ret & WM831X_LDO1_ON_MODE)) + return REGULATOR_MODE_NORMAL; + + ret = wm831x_reg_read(wm831x, ctrl_reg); + if (ret < 0) + return 0; + + if (ret & WM831X_LDO1_LP_MODE) + return REGULATOR_MODE_STANDBY; + else + return REGULATOR_MODE_IDLE; +} + +static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + + switch (mode) { + case REGULATOR_MODE_NORMAL: + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, 0); + if (ret < 0) + return ret; + break; + + case REGULATOR_MODE_IDLE: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO1_LP_MODE, + WM831X_LDO1_LP_MODE); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, + WM831X_LDO1_ON_MODE); + if (ret < 0) + return ret; + + case REGULATOR_MODE_STANDBY: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO1_LP_MODE, 0); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO1_ON_MODE, + WM831X_LDO1_ON_MODE); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (!(ret & mask)) + return REGULATOR_STATUS_OFF; + + /* Is it reporting under voltage? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret & mask) + return REGULATOR_STATUS_ERROR; + + ret = wm831x_gp_ldo_get_mode(rdev); + if (ret < 0) + return ret; + else + return regulator_mode_to_status(ret); +} + +static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev, + int input_uV, + int output_uV, int load_uA) +{ + if (load_uA < 20000) + return REGULATOR_MODE_STANDBY; + if (load_uA < 50000) + return REGULATOR_MODE_IDLE; + return REGULATOR_MODE_NORMAL; +} + + +static struct regulator_ops wm831x_gp_ldo_ops = { + .list_voltage = wm831x_gp_ldo_list_voltage, + .get_voltage = wm831x_gp_ldo_get_voltage, + .set_voltage = wm831x_gp_ldo_set_voltage, + .set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage, + .get_mode = wm831x_gp_ldo_get_mode, + .set_mode = wm831x_gp_ldo_set_mode, + .get_status = wm831x_gp_ldo_get_status, + .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_gp_ldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, + IRQF_TRIGGER_RISING, ldo->name, + ldo); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err_regulator: + regulator_unregister(ldo->regulator); +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + struct wm831x *wm831x = ldo->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_gp_ldo_driver = { + .probe = wm831x_gp_ldo_probe, + .remove = __devexit_p(wm831x_gp_ldo_remove), + .driver = { + .name = "wm831x-ldo", + }, +}; + +/* + * Analogue LDOs + */ + + +#define WM831X_ALDO_SELECTOR_LOW 0xc +#define WM831X_ALDO_MAX_SELECTOR 0x1f + +static int wm831x_aldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 1-1.6V in 50mV steps */ + if (selector <= WM831X_ALDO_SELECTOR_LOW) + return 1000000 + (selector * 50000); + /* 1.7-3.5V in 50mV steps */ + if (selector <= WM831X_ALDO_MAX_SELECTOR) + return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW) + * 100000); + return -EINVAL; +} + +static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + if (min_uV < 1000000) + vsel = 0; + else if (min_uV < 1700000) + vsel = ((min_uV - 1000000) / 50000); + else + vsel = ((min_uV - 1700000) / 100000) + + WM831X_ALDO_SELECTOR_LOW + 1; + + ret = wm831x_aldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel); +} + +static int wm831x_aldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + + return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL; + + return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_aldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO7_ON_VSEL_MASK; + + return wm831x_aldo_list_voltage(rdev, ret); +} + +static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + unsigned int ret; + + ret = wm831x_reg_read(wm831x, on_reg); + if (ret < 0) + return 0; + + if (ret & WM831X_LDO7_ON_MODE) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; +} + +static int wm831x_aldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; + int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; + int ret; + + + switch (mode) { + case REGULATOR_MODE_NORMAL: + ret = wm831x_set_bits(wm831x, on_reg, + WM831X_LDO7_ON_MODE, 0); + if (ret < 0) + return ret; + break; + + case REGULATOR_MODE_IDLE: + ret = wm831x_set_bits(wm831x, ctrl_reg, + WM831X_LDO7_ON_MODE, + WM831X_LDO7_ON_MODE); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm831x_aldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (!(ret & mask)) + return REGULATOR_STATUS_OFF; + + /* Is it reporting under voltage? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret & mask) + return REGULATOR_STATUS_ERROR; + + ret = wm831x_aldo_get_mode(rdev); + if (ret < 0) + return ret; + else + return regulator_mode_to_status(ret); +} + +static struct regulator_ops wm831x_aldo_ops = { + .list_voltage = wm831x_aldo_list_voltage, + .get_voltage = wm831x_aldo_get_voltage, + .set_voltage = wm831x_aldo_set_voltage, + .set_suspend_voltage = wm831x_aldo_set_suspend_voltage, + .get_mode = wm831x_aldo_get_mode, + .set_mode = wm831x_aldo_set_mode, + .get_status = wm831x_aldo_get_status, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_aldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret, irq; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_aldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + irq = platform_get_irq_byname(pdev, "UV"); + ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq, + IRQF_TRIGGER_RISING, ldo->name, + ldo); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", + irq, ret); + goto err_regulator; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err_regulator: + regulator_unregister(ldo->regulator); +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_aldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + struct wm831x *wm831x = ldo->wm831x; + + wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo); + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_aldo_driver = { + .probe = wm831x_aldo_probe, + .remove = __devexit_p(wm831x_aldo_remove), + .driver = { + .name = "wm831x-aldo", + }, +}; + +/* + * Alive LDO + */ + +#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf + +static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + /* 0.8-1.55V in 50mV steps */ + if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR) + return 800000 + (selector * 50000); + return -EINVAL; +} + +static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev, + int reg, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int vsel, ret; + + vsel = (min_uV - 800000) / 50000; + + ret = wm831x_alive_ldo_list_voltage(rdev, vsel); + if (ret < 0) + return ret; + if (ret < min_uV || ret > max_uV) + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel); +} + +static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; + + return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV); +} + +static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev, + int uV) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL; + + return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV); +} + +static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL; + int ret; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + ret &= WM831X_LDO11_ON_VSEL_MASK; + + return wm831x_alive_ldo_list_voltage(rdev, ret); +} + +static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev) +{ + struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); + struct wm831x *wm831x = ldo->wm831x; + int mask = 1 << rdev_get_id(rdev); + int ret; + + /* Is the regulator on? */ + ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS); + if (ret < 0) + return ret; + if (ret & mask) + return REGULATOR_STATUS_ON; + else + return REGULATOR_STATUS_OFF; +} + +static struct regulator_ops wm831x_alive_ldo_ops = { + .list_voltage = wm831x_alive_ldo_list_voltage, + .get_voltage = wm831x_alive_ldo_get_voltage, + .set_voltage = wm831x_alive_ldo_set_voltage, + .set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage, + .get_status = wm831x_alive_ldo_get_status, + + .is_enabled = wm831x_ldo_is_enabled, + .enable = wm831x_ldo_enable, + .disable = wm831x_ldo_disable, +}; + +static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm831x_ldo *ldo; + struct resource *res; + int ret; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (pdata == NULL || pdata->ldo[id] == NULL) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm831x = wm831x; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + ldo->base = res->start; + + snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1); + ldo->desc.name = ldo->name; + ldo->desc.id = id; + ldo->desc.type = REGULATOR_VOLTAGE; + ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1; + ldo->desc.ops = &wm831x_alive_ldo_ops; + ldo->desc.owner = THIS_MODULE; + + ldo->regulator = regulator_register(&ldo->desc, &pdev->dev, + pdata->ldo[id], ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm831x->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err: + kfree(ldo); + return ret; +} + +static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev) +{ + struct wm831x_ldo *ldo = platform_get_drvdata(pdev); + + regulator_unregister(ldo->regulator); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm831x_alive_ldo_driver = { + .probe = wm831x_alive_ldo_probe, + .remove = __devexit_p(wm831x_alive_ldo_remove), + .driver = { + .name = "wm831x-alive-ldo", + }, +}; + +static int __init wm831x_ldo_init(void) +{ + int ret; + + ret = platform_driver_register(&wm831x_gp_ldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x GP LDO driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_aldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x ALDO driver: %d\n", ret); + + ret = platform_driver_register(&wm831x_alive_ldo_driver); + if (ret != 0) + pr_err("Failed to register WM831x alive LDO driver: %d\n", + ret); + + return 0; +} +subsys_initcall(wm831x_ldo_init); + +static void __exit wm831x_ldo_exit(void) +{ + platform_driver_unregister(&wm831x_alive_ldo_driver); + platform_driver_unregister(&wm831x_aldo_driver); + platform_driver_unregister(&wm831x_gp_ldo_driver); +} +module_exit(wm831x_ldo_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x LDO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-ldo"); +MODULE_ALIAS("platform:wm831x-aldo"); +MODULE_ALIAS("platform:wm831x-aliveldo"); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 81adbdbd5042..73771b09fbd3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -518,6 +518,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM831X + tristate "Wolfson Microelectronics WM831x RTC" + depends on MFD_WM831X + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM831X series PMICs. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm831x". + config RTC_DRV_WM8350 tristate "Wolfson Microelectronics WM8350 RTC" depends on MFD_WM8350 @@ -535,6 +545,15 @@ config RTC_DRV_PCF50633 If you say yes here you get support for the RTC subsystem of the NXP PCF50633 used in embedded systems. +config RTC_DRV_AB3100 + tristate "ST-Ericsson AB3100 RTC" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC + support. This chip contains a battery- and capacitor-backed RTC. + + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 3c0f2b2ac927..5e152ffe5058 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -17,6 +17,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o # Keep the list ordered. +obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o @@ -74,6 +75,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c new file mode 100644 index 000000000000..4704aac2b5af --- /dev/null +++ b/drivers/rtc/rtc-ab3100.c @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * RTC clock driver for the AB3100 Analog Baseband Chip + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/mfd/ab3100.h> + +/* Clock rate in Hz */ +#define AB3100_RTC_CLOCK_RATE 32768 + +/* + * The AB3100 RTC registers. These are the same for + * AB3000 and AB3100. + * Control register: + * Bit 0: RTC Monitor cleared=0, active=1, if you set it + * to 1 it remains active until RTC power is lost. + * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass + * Bit 2: Alarm on, 0 = off, 1 = on + * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled + */ +#define AB3100_RTC 0x53 +/* default setting, buffer disabled, alarm on */ +#define RTC_SETTING 0x30 +/* Alarm when AL0-AL3 == TI0-TI3 */ +#define AB3100_AL0 0x56 +#define AB3100_AL1 0x57 +#define AB3100_AL2 0x58 +#define AB3100_AL3 0x59 +/* This 48-bit register that counts up at 32768 Hz */ +#define AB3100_TI0 0x5a +#define AB3100_TI1 0x5b +#define AB3100_TI2 0x5c +#define AB3100_TI3 0x5d +#define AB3100_TI4 0x5e +#define AB3100_TI5 0x5f + +/* + * RTC clock functions and device struct declaration + */ +static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2, + AB3100_TI3, AB3100_TI4, AB3100_TI5}; + unsigned char buf[6]; + u64 fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2; + int err = 0; + int i; + + buf[0] = (fat_time) & 0xFF; + buf[1] = (fat_time >> 8) & 0xFF; + buf[2] = (fat_time >> 16) & 0xFF; + buf[3] = (fat_time >> 24) & 0xFF; + buf[4] = (fat_time >> 32) & 0xFF; + buf[5] = (fat_time >> 40) & 0xFF; + + for (i = 0; i < 6; i++) { + err = ab3100_set_register_interruptible(ab3100_data, + regs[i], buf[i]); + if (err) + return err; + } + + /* Set the flag to mark that the clock is now set */ + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, + 0xFE, 0x01); + +} + +static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + unsigned long time; + u8 rtcval; + int err; + + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, &rtcval); + if (err) + return err; + + if (!(rtcval & 0x01)) { + dev_info(dev, "clock not set (lost power)"); + return -EINVAL; + } else { + u64 fat_time; + u8 buf[6]; + + /* Read out time registers */ + err = ab3100_get_register_page_interruptible(ab3100_data, + AB3100_TI0, + buf, 6); + if (err != 0) + return err; + + fat_time = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) | + ((u64) buf[3] << 24) | ((u64) buf[2] << 16) | + ((u64) buf[1] << 8) | (u64) buf[0]; + time = (unsigned long) (fat_time / + (u64) (AB3100_RTC_CLOCK_RATE * 2)); + } + + rtc_time_to_tm(time, tm); + + return rtc_valid_tm(tm); +} + +static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + unsigned long time; + u64 fat_time; + u8 buf[6]; + u8 rtcval; + int err; + + /* Figure out if alarm is enabled or not */ + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, &rtcval); + if (err) + return err; + if (rtcval & 0x04) + alarm->enabled = 1; + else + alarm->enabled = 0; + /* No idea how this could be represented */ + alarm->pending = 0; + /* Read out alarm registers, only 4 bytes */ + err = ab3100_get_register_page_interruptible(ab3100_data, + AB3100_AL0, buf, 4); + if (err) + return err; + fat_time = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) | + ((u64) buf[1] << 24) | ((u64) buf[0] << 16); + time = (unsigned long) (fat_time / (u64) (AB3100_RTC_CLOCK_RATE * 2)); + + rtc_time_to_tm(time, &alarm->time); + + return rtc_valid_tm(&alarm->time); +} + +static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3}; + unsigned char buf[4]; + unsigned long secs; + u64 fat_time; + int err; + int i; + + rtc_tm_to_time(&alarm->time, &secs); + fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2; + buf[0] = (fat_time >> 16) & 0xFF; + buf[1] = (fat_time >> 24) & 0xFF; + buf[2] = (fat_time >> 32) & 0xFF; + buf[3] = (fat_time >> 40) & 0xFF; + + /* Set the alarm */ + for (i = 0; i < 4; i++) { + err = ab3100_set_register_interruptible(ab3100_data, + regs[i], buf[i]); + if (err) + return err; + } + /* Then enable the alarm */ + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + alarm->enabled << 2); +} + +static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled) +{ + struct ab3100 *ab3100_data = dev_get_drvdata(dev); + + /* + * It's not possible to enable/disable the alarm IRQ for this RTC. + * It does not actually trigger any IRQ: instead its only function is + * to power up the system, if it wasn't on. This will manifest as + * a "power up cause" in the AB3100 power driver (battery charging etc) + * and need to be handled there instead. + */ + if (enabled) + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + 1 << 2); + else + return ab3100_mask_and_set_register_interruptible(ab3100_data, + AB3100_RTC, ~(1 << 2), + 0); +} + +static const struct rtc_class_ops ab3100_rtc_ops = { + .read_time = ab3100_rtc_read_time, + .set_mmss = ab3100_rtc_set_mmss, + .read_alarm = ab3100_rtc_read_alarm, + .set_alarm = ab3100_rtc_set_alarm, + .alarm_irq_enable = ab3100_rtc_irq_enable, +}; + +static int __init ab3100_rtc_probe(struct platform_device *pdev) +{ + int err; + u8 regval; + struct rtc_device *rtc; + struct ab3100 *ab3100_data = platform_get_drvdata(pdev); + + /* The first RTC register needs special treatment */ + err = ab3100_get_register_interruptible(ab3100_data, + AB3100_RTC, ®val); + if (err) { + dev_err(&pdev->dev, "unable to read RTC register\n"); + return -ENODEV; + } + + if ((regval & 0xFE) != RTC_SETTING) { + dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n", + regval); + } + + if ((regval & 1) == 0) { + /* + * Set bit to detect power loss. + * This bit remains until RTC power is lost. + */ + regval = 1 | RTC_SETTING; + err = ab3100_set_register_interruptible(ab3100_data, + AB3100_RTC, regval); + /* Ignore any error on this write */ + } + + rtc = rtc_device_register("ab3100-rtc", &pdev->dev, &ab3100_rtc_ops, + THIS_MODULE); + if (IS_ERR(rtc)) { + err = PTR_ERR(rtc); + return err; + } + + return 0; +} + +static int __exit ab3100_rtc_remove(struct platform_device *pdev) +{ + struct rtc_device *rtc = platform_get_drvdata(pdev); + + rtc_device_unregister(rtc); + return 0; +} + +static struct platform_driver ab3100_rtc_driver = { + .driver = { + .name = "ab3100-rtc", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ab3100_rtc_remove), +}; + +static int __init ab3100_rtc_init(void) +{ + return platform_driver_probe(&ab3100_rtc_driver, + ab3100_rtc_probe); +} + +static void __exit ab3100_rtc_exit(void) +{ + platform_driver_unregister(&ab3100_rtc_driver); +} + +module_init(ab3100_rtc_init); +module_exit(ab3100_rtc_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 RTC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c new file mode 100644 index 000000000000..79795cdf6ed8 --- /dev/null +++ b/drivers/rtc/rtc-wm831x.c @@ -0,0 +1,523 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM831x + * + * Copyright (C) 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/completion.h> +#include <linux/mfd/wm831x/core.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + + +/* + * R16416 (0x4020) - RTC Write Counter + */ +#define WM831X_RTC_WR_CNT_MASK 0xFFFF /* RTC_WR_CNT - [15:0] */ +#define WM831X_RTC_WR_CNT_SHIFT 0 /* RTC_WR_CNT - [15:0] */ +#define WM831X_RTC_WR_CNT_WIDTH 16 /* RTC_WR_CNT - [15:0] */ + +/* + * R16417 (0x4021) - RTC Time 1 + */ +#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ + +/* + * R16418 (0x4022) - RTC Time 2 + */ +#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ +#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ + +/* + * R16419 (0x4023) - RTC Alarm 1 + */ +#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ + +/* + * R16420 (0x4024) - RTC Alarm 2 + */ +#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ +#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ + +/* + * R16421 (0x4025) - RTC Control + */ +#define WM831X_RTC_VALID 0x8000 /* RTC_VALID */ +#define WM831X_RTC_VALID_MASK 0x8000 /* RTC_VALID */ +#define WM831X_RTC_VALID_SHIFT 15 /* RTC_VALID */ +#define WM831X_RTC_VALID_WIDTH 1 /* RTC_VALID */ +#define WM831X_RTC_SYNC_BUSY 0x4000 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_MASK 0x4000 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_SHIFT 14 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_SYNC_BUSY_WIDTH 1 /* RTC_SYNC_BUSY */ +#define WM831X_RTC_ALM_ENA 0x0400 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_MASK 0x0400 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_SHIFT 10 /* RTC_ALM_ENA */ +#define WM831X_RTC_ALM_ENA_WIDTH 1 /* RTC_ALM_ENA */ +#define WM831X_RTC_PINT_FREQ_MASK 0x0070 /* RTC_PINT_FREQ - [6:4] */ +#define WM831X_RTC_PINT_FREQ_SHIFT 4 /* RTC_PINT_FREQ - [6:4] */ +#define WM831X_RTC_PINT_FREQ_WIDTH 3 /* RTC_PINT_FREQ - [6:4] */ + +/* + * R16422 (0x4026) - RTC Trim + */ +#define WM831X_RTC_TRIM_MASK 0x03FF /* RTC_TRIM - [9:0] */ +#define WM831X_RTC_TRIM_SHIFT 0 /* RTC_TRIM - [9:0] */ +#define WM831X_RTC_TRIM_WIDTH 10 /* RTC_TRIM - [9:0] */ + +#define WM831X_SET_TIME_RETRIES 5 +#define WM831X_GET_TIME_RETRIES 5 + +struct wm831x_rtc { + struct wm831x *wm831x; + struct rtc_device *rtc; + unsigned int alarm_enabled:1; +}; + +/* + * Read current time and date in RTC + */ +static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + u16 time1[2], time2[2]; + int ret; + int count = 0; + + /* Has the RTC been programmed? */ + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(dev, "Failed to read RTC control: %d\n", ret); + return ret; + } + if (!(ret & WM831X_RTC_VALID)) { + dev_dbg(dev, "RTC not yet configured\n"); + return -EINVAL; + } + + /* Read twice to make sure we don't read a corrupt, partially + * incremented, value. + */ + do { + ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, + 2, time1); + if (ret != 0) + continue; + + ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, + 2, time2); + if (ret != 0) + continue; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + u32 time = (time1[0] << 16) | time1[1]; + + rtc_time_to_tm(time, tm); + return rtc_valid_tm(tm); + } + + } while (++count < WM831X_GET_TIME_RETRIES); + + dev_err(dev, "Timed out reading current time\n"); + + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + struct rtc_time new_tm; + unsigned long new_time; + int ret; + int count = 0; + + ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1, + (time >> 16) & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write TIME_1: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write TIME_2: %d\n", ret); + return ret; + } + + /* Wait for the update to complete - should happen first time + * round but be conservative. + */ + do { + msleep(1); + + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) + ret = WM831X_RTC_SYNC_BUSY; + } while (!(ret & WM831X_RTC_SYNC_BUSY) && + ++count < WM831X_SET_TIME_RETRIES); + + if (ret & WM831X_RTC_SYNC_BUSY) { + dev_err(dev, "Timed out writing RTC update\n"); + return -EIO; + } + + /* Check that the update was accepted; security features may + * have caused the update to be ignored. + */ + ret = wm831x_rtc_readtime(dev, &new_tm); + if (ret < 0) + return ret; + + ret = rtc_tm_to_time(&new_tm, &new_time); + if (ret < 0) { + dev_err(dev, "Failed to convert time: %d\n", ret); + return ret; + } + + /* Allow a second of change in case of tick */ + if (new_time - time > 1) { + dev_err(dev, "RTC update not permitted by hardware\n"); + return -EPERM; + } + + return 0; +} + +/* + * Read alarm time and date in RTC + */ +static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + int ret; + u16 data[2]; + u32 time; + + ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1, + 2, data); + if (ret != 0) { + dev_err(dev, "Failed to read alarm time: %d\n", ret); + return ret; + } + + time = (data[0] << 16) | data[1]; + + rtc_time_to_tm(time, &alrm->time); + + ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(dev, "Failed to read RTC control: %d\n", ret); + return ret; + } + + if (ret & WM831X_RTC_ALM_ENA) + alrm->enabled = 1; + else + alrm->enabled = 0; + + return 0; +} + +static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc) +{ + wm831x_rtc->alarm_enabled = 0; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, 0); +} + +static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc) +{ + wm831x_rtc->alarm_enabled = 1; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA); +} + +static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + struct wm831x *wm831x = wm831x_rtc->wm831x; + int ret; + unsigned long time; + + ret = rtc_tm_to_time(&alrm->time, &time); + if (ret < 0) { + dev_err(dev, "Failed to convert time: %d\n", ret); + return ret; + } + + ret = wm831x_rtc_stop_alarm(wm831x_rtc); + if (ret < 0) { + dev_err(dev, "Failed to stop alarm: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1, + (time >> 16) & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write ALARM_1: %d\n", ret); + return ret; + } + + ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff); + if (ret < 0) { + dev_err(dev, "Failed to write ALARM_2: %d\n", ret); + return ret; + } + + if (alrm->enabled) { + ret = wm831x_rtc_start_alarm(wm831x_rtc); + if (ret < 0) { + dev_err(dev, "Failed to start alarm: %d\n", ret); + return ret; + } + } + + return 0; +} + +static int wm831x_rtc_alarm_irq_enable(struct device *dev, + unsigned int enabled) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + + if (enabled) + return wm831x_rtc_start_alarm(wm831x_rtc); + else + return wm831x_rtc_stop_alarm(wm831x_rtc); +} + +static int wm831x_rtc_update_irq_enable(struct device *dev, + unsigned int enabled) +{ + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); + int val; + + if (enabled) + val = 1 << WM831X_RTC_PINT_FREQ_SHIFT; + else + val = 0; + + return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_PINT_FREQ_MASK, val); +} + +static irqreturn_t wm831x_alm_irq(int irq, void *data) +{ + struct wm831x_rtc *wm831x_rtc = data; + + rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_per_irq(int irq, void *data) +{ + struct wm831x_rtc *wm831x_rtc = data; + + rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops wm831x_rtc_ops = { + .read_time = wm831x_rtc_readtime, + .set_mmss = wm831x_rtc_set_mmss, + .read_alarm = wm831x_rtc_readalarm, + .set_alarm = wm831x_rtc_setalarm, + .alarm_irq_enable = wm831x_rtc_alarm_irq_enable, + .update_irq_enable = wm831x_rtc_update_irq_enable, +}; + +#ifdef CONFIG_PM +/* Turn off the alarm if it should not be a wake source. */ +static int wm831x_rtc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret, enable; + + if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev)) + enable = WM831X_RTC_ALM_ENA; + else + enable = 0; + + ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, enable); + if (ret != 0) + dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret); + + return 0; +} + +/* Enable the alarm if it should be enabled (in case it was disabled to + * prevent use as a wake source). + */ +static int wm831x_rtc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm831x_rtc->alarm_enabled) { + ret = wm831x_rtc_start_alarm(wm831x_rtc); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +/* Unconditionally disable the alarm */ +static int wm831x_rtc_freeze(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); + int ret; + + ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, + WM831X_RTC_ALM_ENA, 0); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret); + + return 0; +} +#else +#define wm831x_rtc_suspend NULL +#define wm831x_rtc_resume NULL +#define wm831x_rtc_freeze NULL +#endif + +static int wm831x_rtc_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_rtc *wm831x_rtc; + int per_irq = platform_get_irq_byname(pdev, "PER"); + int alm_irq = platform_get_irq_byname(pdev, "ALM"); + int ret = 0; + + wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL); + if (wm831x_rtc == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, wm831x_rtc); + wm831x_rtc->wm831x = wm831x; + + ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret); + goto err; + } + if (ret & WM831X_RTC_ALM_ENA) + wm831x_rtc->alarm_enabled = 1; + + device_init_wakeup(&pdev->dev, 1); + + wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev, + &wm831x_rtc_ops, THIS_MODULE); + if (IS_ERR(wm831x_rtc->rtc)) { + ret = PTR_ERR(wm831x_rtc->rtc); + goto err; + } + + ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq, + IRQF_TRIGGER_RISING, "wm831x_rtc_per", + wm831x_rtc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n", + per_irq, ret); + } + + ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq, + IRQF_TRIGGER_RISING, "wm831x_rtc_alm", + wm831x_rtc); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n", + alm_irq, ret); + } + + return 0; + +err: + kfree(wm831x_rtc); + return ret; +} + +static int __devexit wm831x_rtc_remove(struct platform_device *pdev) +{ + struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev); + int per_irq = platform_get_irq_byname(pdev, "PER"); + int alm_irq = platform_get_irq_byname(pdev, "ALM"); + + wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc); + wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc); + rtc_device_unregister(wm831x_rtc->rtc); + kfree(wm831x_rtc); + + return 0; +} + +static struct dev_pm_ops wm831x_rtc_pm_ops = { + .suspend = wm831x_rtc_suspend, + .resume = wm831x_rtc_resume, + + .freeze = wm831x_rtc_freeze, + .thaw = wm831x_rtc_resume, + .restore = wm831x_rtc_resume, + + .poweroff = wm831x_rtc_suspend, +}; + +static struct platform_driver wm831x_rtc_driver = { + .probe = wm831x_rtc_probe, + .remove = __devexit_p(wm831x_rtc_remove), + .driver = { + .name = "wm831x-rtc", + .pm = &wm831x_rtc_pm_ops, + }, +}; + +static int __init wm831x_rtc_init(void) +{ + return platform_driver_register(&wm831x_rtc_driver); +} +module_init(wm831x_rtc_init); + +static void __exit wm831x_rtc_exit(void) +{ + platform_driver_unregister(&wm831x_rtc_driver); +} +module_exit(wm831x_rtc_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-rtc"); diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 3fd21d7cb6bf..2d02dfd7076c 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /* Power bus message definitions */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 -#define DEV_GRP_P2 0x2 -#define DEV_GRP_P3 0x4 +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ -#define RES_GRP_RES 0x0 -#define RES_GRP_PP 0x1 -#define RES_GRP_RC 0x2 +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ #define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 +#define RES_GRP_PR 0x4 /* Power references */ #define RES_GRP_PP_PR 0x5 #define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 +#define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 @@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); #define RES_STATE_SLEEP 0x8 #define RES_STATE_OFF 0x0 +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 /* * Power Bus Message Format ... these can be sent individually by Linux, * but are usually part of downloaded scripts that are run when various @@ -327,6 +371,36 @@ struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; }; +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_bci_platform_data *bci; @@ -334,6 +408,7 @@ struct twl4030_platform_data { struct twl4030_madc_platform_data *madc; struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + struct twl4030_power_data *power; /* LDO regulators */ struct regulator_init_data *vdac; @@ -364,7 +439,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 - #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) extern int twl4030charger_usb_en(int enable); diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h index 7a3f316e3848..e9aa4c9d749d 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/ab3100.h @@ -6,6 +6,8 @@ */ #include <linux/device.h> +#include <linux/workqueue.h> +#include <linux/regulator/machine.h> #ifndef MFD_AB3100_H #define MFD_AB3100_H @@ -56,6 +58,14 @@ #define AB3100_STR_BATT_REMOVAL (0x40) #define AB3100_STR_VBUS (0x80) +/* + * AB3100 contains 8 regulators, one external regulator controller + * and a buck converter, further the LDO E and buck converter can + * have separate settings if they are in sleep mode, this is + * modeled as a separate regulator. + */ +#define AB3100_NUM_REGULATORS 10 + /** * struct ab3100 * @access_mutex: lock out concurrent accesses to the AB3100 registers @@ -86,11 +96,30 @@ struct ab3100 { bool startup_events_read; }; -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval); -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval); -int ab3100_get_register_page(struct ab3100 *ab3100, +/** + * struct ab3100_platform_data + * Data supplied to initialize board connections to the AB3100 + * @reg_constraints: regulator constraints for target board + * the order of these constraints are: LDO A, C, D, E, + * F, G, H, K, EXT and BUCK. + * @reg_initvals: initial values for the regulator registers + * plus two sleep settings for LDO E and the BUCK converter. + * exactly AB3100_NUM_REGULATORS+2 values must be sent in. + * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, + * BUCK sleep, LDO D. (LDO D need to be initialized last.) + * @external_voltage: voltage level of the external regulator. + */ +struct ab3100_platform_data { + struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; + u8 reg_initvals[AB3100_NUM_REGULATORS+2]; + int external_voltage; +}; + +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval); +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval); +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs); -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask); u8 ab3100_get_chip_type(struct ab3100 *ab3100); int ab3100_event_register(struct ab3100 *ab3100, diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 49ef857cdb2d..11d740b8831d 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -23,6 +23,7 @@ */ struct mfd_cell { const char *name; + int id; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index c12c3c0932bf..e5124ceea769 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -25,9 +25,12 @@ struct pcap_chip; int ezx_pcap_write(struct pcap_chip *, u8, u32); int ezx_pcap_read(struct pcap_chip *, u8, u32 *); +int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32); int pcap_to_irq(struct pcap_chip *, int); +int irq_to_pcap(struct pcap_chip *, int); int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); +void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_SECOND_PORT 1 #define PCAP_CS_AH 2 @@ -224,7 +227,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); #define PCAP_LED1 1 #define PCAP_BL0 2 #define PCAP_BL1 3 -#define PCAP_VIB 4 #define PCAP_LED_3MA 0 #define PCAP_LED_4MA 1 #define PCAP_LED_5MA 2 @@ -243,9 +245,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); #define PCAP_LED0_C_SHIFT 15 #define PCAP_LED1_C_SHIFT 17 #define PCAP_BL1_SHIFT 20 -#define PCAP_VIB_MASK 0x3 -#define PCAP_VIB_SHIFT 20 -#define PCAP_VIB_EN (1 << 19) /* RTC */ #define PCAP_RTC_DAY_MASK 0x3fff diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h new file mode 100644 index 000000000000..47e698cb0f16 --- /dev/null +++ b/include/linux/mfd/mc13783-private.h @@ -0,0 +1,396 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_MFD_MC13783_PRIV_H +#define __LINUX_MFD_MC13783_PRIV_H + +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> + +struct mc13783_irq { + void (*handler)(int, void *); + void *data; +}; + +#define MC13783_NUM_IRQ 2 +#define MC13783_IRQ_TS 0 +#define MC13783_IRQ_REGULATOR 1 + +#define MC13783_ADC_MODE_TS 1 +#define MC13783_ADC_MODE_SINGLE_CHAN 2 +#define MC13783_ADC_MODE_MULT_CHAN 3 + +struct mc13783 { + int revision; + struct device *dev; + struct spi_device *spi_device; + + int (*read_dev)(void *data, char reg, int count, u32 *dst); + int (*write_dev)(void *data, char reg, int count, const u32 *src); + + struct mutex io_lock; + void *io_data; + int irq; + unsigned int flags; + + struct mc13783_irq irq_handler[MC13783_NUM_IRQ]; + struct work_struct work; + struct completion adc_done; + unsigned int ts_active; + struct mutex adc_conv_lock; + + struct mc13783_regulator_init_data *regulators; + int num_regulators; +}; + +int mc13783_reg_read(struct mc13783 *, int reg_num, u32 *); +int mc13783_reg_write(struct mc13783 *, int, u32); +int mc13783_set_bits(struct mc13783 *, int, u32, u32); +int mc13783_free_irq(struct mc13783 *mc13783, int irq); +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data); + +#define MC13783_REG_INTERRUPT_STATUS_0 0 +#define MC13783_REG_INTERRUPT_MASK_0 1 +#define MC13783_REG_INTERRUPT_SENSE_0 2 +#define MC13783_REG_INTERRUPT_STATUS_1 3 +#define MC13783_REG_INTERRUPT_MASK_1 4 +#define MC13783_REG_INTERRUPT_SENSE_1 5 +#define MC13783_REG_POWER_UP_MODE_SENSE 6 +#define MC13783_REG_REVISION 7 +#define MC13783_REG_SEMAPHORE 8 +#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9 +#define MC13783_REG_ARBITRATION_SWITCHERS 10 +#define MC13783_REG_ARBITRATION_REGULATORS_0 11 +#define MC13783_REG_ARBITRATION_REGULATORS_1 12 +#define MC13783_REG_POWER_CONTROL_0 13 +#define MC13783_REG_POWER_CONTROL_1 14 +#define MC13783_REG_POWER_CONTROL_2 15 +#define MC13783_REG_REGEN_ASSIGNMENT 16 +#define MC13783_REG_CONTROL_SPARE 17 +#define MC13783_REG_MEMORY_A 18 +#define MC13783_REG_MEMORY_B 19 +#define MC13783_REG_RTC_TIME 20 +#define MC13783_REG_RTC_ALARM 21 +#define MC13783_REG_RTC_DAY 22 +#define MC13783_REG_RTC_DAY_ALARM 23 +#define MC13783_REG_SWITCHERS_0 24 +#define MC13783_REG_SWITCHERS_1 25 +#define MC13783_REG_SWITCHERS_2 26 +#define MC13783_REG_SWITCHERS_3 27 +#define MC13783_REG_SWITCHERS_4 28 +#define MC13783_REG_SWITCHERS_5 29 +#define MC13783_REG_REGULATOR_SETTING_0 30 +#define MC13783_REG_REGULATOR_SETTING_1 31 +#define MC13783_REG_REGULATOR_MODE_0 32 +#define MC13783_REG_REGULATOR_MODE_1 33 +#define MC13783_REG_POWER_MISCELLANEOUS 34 +#define MC13783_REG_POWER_SPARE 35 +#define MC13783_REG_AUDIO_RX_0 36 +#define MC13783_REG_AUDIO_RX_1 37 +#define MC13783_REG_AUDIO_TX 38 +#define MC13783_REG_AUDIO_SSI_NETWORK 39 +#define MC13783_REG_AUDIO_CODEC 40 +#define MC13783_REG_AUDIO_STEREO_DAC 41 +#define MC13783_REG_AUDIO_SPARE 42 +#define MC13783_REG_ADC_0 43 +#define MC13783_REG_ADC_1 44 +#define MC13783_REG_ADC_2 45 +#define MC13783_REG_ADC_3 46 +#define MC13783_REG_ADC_4 47 +#define MC13783_REG_CHARGER 48 +#define MC13783_REG_USB 49 +#define MC13783_REG_CHARGE_USB_SPARE 50 +#define MC13783_REG_LED_CONTROL_0 51 +#define MC13783_REG_LED_CONTROL_1 52 +#define MC13783_REG_LED_CONTROL_2 53 +#define MC13783_REG_LED_CONTROL_3 54 +#define MC13783_REG_LED_CONTROL_4 55 +#define MC13783_REG_LED_CONTROL_5 56 +#define MC13783_REG_SPARE 57 +#define MC13783_REG_TRIM_0 58 +#define MC13783_REG_TRIM_1 59 +#define MC13783_REG_TEST_0 60 +#define MC13783_REG_TEST_1 61 +#define MC13783_REG_TEST_2 62 +#define MC13783_REG_TEST_3 63 +#define MC13783_REG_NB 64 + + +/* + * Interrupt Status + */ +#define MC13783_INT_STAT_ADCDONEI (1 << 0) +#define MC13783_INT_STAT_ADCBISDONEI (1 << 1) +#define MC13783_INT_STAT_TSI (1 << 2) +#define MC13783_INT_STAT_WHIGHI (1 << 3) +#define MC13783_INT_STAT_WLOWI (1 << 4) +#define MC13783_INT_STAT_CHGDETI (1 << 6) +#define MC13783_INT_STAT_CHGOVI (1 << 7) +#define MC13783_INT_STAT_CHGREVI (1 << 8) +#define MC13783_INT_STAT_CHGSHORTI (1 << 9) +#define MC13783_INT_STAT_CCCVI (1 << 10) +#define MC13783_INT_STAT_CHGCURRI (1 << 11) +#define MC13783_INT_STAT_BPONI (1 << 12) +#define MC13783_INT_STAT_LOBATLI (1 << 13) +#define MC13783_INT_STAT_LOBATHI (1 << 14) +#define MC13783_INT_STAT_UDPI (1 << 15) +#define MC13783_INT_STAT_USBI (1 << 16) +#define MC13783_INT_STAT_IDI (1 << 19) +#define MC13783_INT_STAT_Unused (1 << 20) +#define MC13783_INT_STAT_SE1I (1 << 21) +#define MC13783_INT_STAT_CKDETI (1 << 22) +#define MC13783_INT_STAT_UDMI (1 << 23) + +/* + * Interrupt Mask + */ +#define MC13783_INT_MASK_ADCDONEM (1 << 0) +#define MC13783_INT_MASK_ADCBISDONEM (1 << 1) +#define MC13783_INT_MASK_TSM (1 << 2) +#define MC13783_INT_MASK_WHIGHM (1 << 3) +#define MC13783_INT_MASK_WLOWM (1 << 4) +#define MC13783_INT_MASK_CHGDETM (1 << 6) +#define MC13783_INT_MASK_CHGOVM (1 << 7) +#define MC13783_INT_MASK_CHGREVM (1 << 8) +#define MC13783_INT_MASK_CHGSHORTM (1 << 9) +#define MC13783_INT_MASK_CCCVM (1 << 10) +#define MC13783_INT_MASK_CHGCURRM (1 << 11) +#define MC13783_INT_MASK_BPONM (1 << 12) +#define MC13783_INT_MASK_LOBATLM (1 << 13) +#define MC13783_INT_MASK_LOBATHM (1 << 14) +#define MC13783_INT_MASK_UDPM (1 << 15) +#define MC13783_INT_MASK_USBM (1 << 16) +#define MC13783_INT_MASK_IDM (1 << 19) +#define MC13783_INT_MASK_SE1M (1 << 21) +#define MC13783_INT_MASK_CKDETM (1 << 22) + +/* + * Reg Regulator Mode 0 + */ +#define MC13783_REGCTRL_VAUDIO_EN (1 << 0) +#define MC13783_REGCTRL_VAUDIO_STBY (1 << 1) +#define MC13783_REGCTRL_VAUDIO_MODE (1 << 2) +#define MC13783_REGCTRL_VIOHI_EN (1 << 3) +#define MC13783_REGCTRL_VIOHI_STBY (1 << 4) +#define MC13783_REGCTRL_VIOHI_MODE (1 << 5) +#define MC13783_REGCTRL_VIOLO_EN (1 << 6) +#define MC13783_REGCTRL_VIOLO_STBY (1 << 7) +#define MC13783_REGCTRL_VIOLO_MODE (1 << 8) +#define MC13783_REGCTRL_VDIG_EN (1 << 9) +#define MC13783_REGCTRL_VDIG_STBY (1 << 10) +#define MC13783_REGCTRL_VDIG_MODE (1 << 11) +#define MC13783_REGCTRL_VGEN_EN (1 << 12) +#define MC13783_REGCTRL_VGEN_STBY (1 << 13) +#define MC13783_REGCTRL_VGEN_MODE (1 << 14) +#define MC13783_REGCTRL_VRFDIG_EN (1 << 15) +#define MC13783_REGCTRL_VRFDIG_STBY (1 << 16) +#define MC13783_REGCTRL_VRFDIG_MODE (1 << 17) +#define MC13783_REGCTRL_VRFREF_EN (1 << 18) +#define MC13783_REGCTRL_VRFREF_STBY (1 << 19) +#define MC13783_REGCTRL_VRFREF_MODE (1 << 20) +#define MC13783_REGCTRL_VRFCP_EN (1 << 21) +#define MC13783_REGCTRL_VRFCP_STBY (1 << 22) +#define MC13783_REGCTRL_VRFCP_MODE (1 << 23) + +/* + * Reg Regulator Mode 1 + */ +#define MC13783_REGCTRL_VSIM_EN (1 << 0) +#define MC13783_REGCTRL_VSIM_STBY (1 << 1) +#define MC13783_REGCTRL_VSIM_MODE (1 << 2) +#define MC13783_REGCTRL_VESIM_EN (1 << 3) +#define MC13783_REGCTRL_VESIM_STBY (1 << 4) +#define MC13783_REGCTRL_VESIM_MODE (1 << 5) +#define MC13783_REGCTRL_VCAM_EN (1 << 6) +#define MC13783_REGCTRL_VCAM_STBY (1 << 7) +#define MC13783_REGCTRL_VCAM_MODE (1 << 8) +#define MC13783_REGCTRL_VRFBG_EN (1 << 9) +#define MC13783_REGCTRL_VRFBG_STBY (1 << 10) +#define MC13783_REGCTRL_VVIB_EN (1 << 11) +#define MC13783_REGCTRL_VRF1_EN (1 << 12) +#define MC13783_REGCTRL_VRF1_STBY (1 << 13) +#define MC13783_REGCTRL_VRF1_MODE (1 << 14) +#define MC13783_REGCTRL_VRF2_EN (1 << 15) +#define MC13783_REGCTRL_VRF2_STBY (1 << 16) +#define MC13783_REGCTRL_VRF2_MODE (1 << 17) +#define MC13783_REGCTRL_VMMC1_EN (1 << 18) +#define MC13783_REGCTRL_VMMC1_STBY (1 << 19) +#define MC13783_REGCTRL_VMMC1_MODE (1 << 20) +#define MC13783_REGCTRL_VMMC2_EN (1 << 21) +#define MC13783_REGCTRL_VMMC2_STBY (1 << 22) +#define MC13783_REGCTRL_VMMC2_MODE (1 << 23) + +/* + * Reg Regulator Misc. + */ +#define MC13783_REGCTRL_GPO1_EN (1 << 6) +#define MC13783_REGCTRL_GPO2_EN (1 << 8) +#define MC13783_REGCTRL_GPO3_EN (1 << 10) +#define MC13783_REGCTRL_GPO4_EN (1 << 12) +#define MC13783_REGCTRL_VIBPINCTRL (1 << 14) + +/* + * Reg Switcher 4 + */ +#define MC13783_SWCTRL_SW1A_MODE (1 << 0) +#define MC13783_SWCTRL_SW1A_STBY_MODE (1 << 2) +#define MC13783_SWCTRL_SW1A_DVS_SPEED (1 << 6) +#define MC13783_SWCTRL_SW1A_PANIC_MODE (1 << 8) +#define MC13783_SWCTRL_SW1A_SOFTSTART (1 << 9) +#define MC13783_SWCTRL_SW1B_MODE (1 << 10) +#define MC13783_SWCTRL_SW1B_STBY_MODE (1 << 12) +#define MC13783_SWCTRL_SW1B_DVS_SPEED (1 << 14) +#define MC13783_SWCTRL_SW1B_PANIC_MODE (1 << 16) +#define MC13783_SWCTRL_SW1B_SOFTSTART (1 << 17) +#define MC13783_SWCTRL_PLL_EN (1 << 18) +#define MC13783_SWCTRL_PLL_FACTOR (1 << 19) + +/* + * Reg Switcher 5 + */ +#define MC13783_SWCTRL_SW2A_MODE (1 << 0) +#define MC13783_SWCTRL_SW2A_STBY_MODE (1 << 2) +#define MC13783_SWCTRL_SW2A_DVS_SPEED (1 << 6) +#define MC13783_SWCTRL_SW2A_PANIC_MODE (1 << 8) +#define MC13783_SWCTRL_SW2A_SOFTSTART (1 << 9) +#define MC13783_SWCTRL_SW2B_MODE (1 << 10) +#define MC13783_SWCTRL_SW2B_STBY_MODE (1 << 12) +#define MC13783_SWCTRL_SW2B_DVS_SPEED (1 << 14) +#define MC13783_SWCTRL_SW2B_PANIC_MODE (1 << 16) +#define MC13783_SWCTRL_SW2B_SOFTSTART (1 << 17) +#define MC13783_SWSET_SW3 (1 << 18) +#define MC13783_SWCTRL_SW3_EN (1 << 20) +#define MC13783_SWCTRL_SW3_STBY (1 << 21) +#define MC13783_SWCTRL_SW3_MODE (1 << 22) + +/* + * ADC/Touch + */ +#define MC13783_ADC0_LICELLCON (1 << 0) +#define MC13783_ADC0_CHRGICON (1 << 1) +#define MC13783_ADC0_BATICON (1 << 2) +#define MC13783_ADC0_RTHEN (1 << 3) +#define MC13783_ADC0_DTHEN (1 << 4) +#define MC13783_ADC0_UIDEN (1 << 5) +#define MC13783_ADC0_ADOUTEN (1 << 6) +#define MC13783_ADC0_ADOUTPER (1 << 7) +#define MC13783_ADC0_ADREFEN (1 << 10) +#define MC13783_ADC0_ADREFMODE (1 << 11) +#define MC13783_ADC0_TSMOD0 (1 << 12) +#define MC13783_ADC0_TSMOD1 (1 << 13) +#define MC13783_ADC0_TSMOD2 (1 << 14) +#define MC13783_ADC0_CHRGRAWDIV (1 << 15) +#define MC13783_ADC0_ADINC1 (1 << 16) +#define MC13783_ADC0_ADINC2 (1 << 17) +#define MC13783_ADC0_WCOMP (1 << 18) +#define MC13783_ADC0_ADCBIS0 (1 << 23) + +#define MC13783_ADC1_ADEN (1 << 0) +#define MC13783_ADC1_RAND (1 << 1) +#define MC13783_ADC1_ADSEL (1 << 3) +#define MC13783_ADC1_TRIGMASK (1 << 4) +#define MC13783_ADC1_ADA10 (1 << 5) +#define MC13783_ADC1_ADA11 (1 << 6) +#define MC13783_ADC1_ADA12 (1 << 7) +#define MC13783_ADC1_ADA20 (1 << 8) +#define MC13783_ADC1_ADA21 (1 << 9) +#define MC13783_ADC1_ADA22 (1 << 10) +#define MC13783_ADC1_ATO0 (1 << 11) +#define MC13783_ADC1_ATO1 (1 << 12) +#define MC13783_ADC1_ATO2 (1 << 13) +#define MC13783_ADC1_ATO3 (1 << 14) +#define MC13783_ADC1_ATO4 (1 << 15) +#define MC13783_ADC1_ATO5 (1 << 16) +#define MC13783_ADC1_ATO6 (1 << 17) +#define MC13783_ADC1_ATO7 (1 << 18) +#define MC13783_ADC1_ATOX (1 << 19) +#define MC13783_ADC1_ASC (1 << 20) +#define MC13783_ADC1_ADTRIGIGN (1 << 21) +#define MC13783_ADC1_ADONESHOT (1 << 22) +#define MC13783_ADC1_ADCBIS1 (1 << 23) + +#define MC13783_ADC1_CHAN0_SHIFT 5 +#define MC13783_ADC1_CHAN1_SHIFT 8 + +#define MC13783_ADC2_ADD10 (1 << 2) +#define MC13783_ADC2_ADD11 (1 << 3) +#define MC13783_ADC2_ADD12 (1 << 4) +#define MC13783_ADC2_ADD13 (1 << 5) +#define MC13783_ADC2_ADD14 (1 << 6) +#define MC13783_ADC2_ADD15 (1 << 7) +#define MC13783_ADC2_ADD16 (1 << 8) +#define MC13783_ADC2_ADD17 (1 << 9) +#define MC13783_ADC2_ADD18 (1 << 10) +#define MC13783_ADC2_ADD19 (1 << 11) +#define MC13783_ADC2_ADD20 (1 << 14) +#define MC13783_ADC2_ADD21 (1 << 15) +#define MC13783_ADC2_ADD22 (1 << 16) +#define MC13783_ADC2_ADD23 (1 << 17) +#define MC13783_ADC2_ADD24 (1 << 18) +#define MC13783_ADC2_ADD25 (1 << 19) +#define MC13783_ADC2_ADD26 (1 << 20) +#define MC13783_ADC2_ADD27 (1 << 21) +#define MC13783_ADC2_ADD28 (1 << 22) +#define MC13783_ADC2_ADD29 (1 << 23) + +#define MC13783_ADC3_WHIGH0 (1 << 0) +#define MC13783_ADC3_WHIGH1 (1 << 1) +#define MC13783_ADC3_WHIGH2 (1 << 2) +#define MC13783_ADC3_WHIGH3 (1 << 3) +#define MC13783_ADC3_WHIGH4 (1 << 4) +#define MC13783_ADC3_WHIGH5 (1 << 5) +#define MC13783_ADC3_ICID0 (1 << 6) +#define MC13783_ADC3_ICID1 (1 << 7) +#define MC13783_ADC3_ICID2 (1 << 8) +#define MC13783_ADC3_WLOW0 (1 << 9) +#define MC13783_ADC3_WLOW1 (1 << 10) +#define MC13783_ADC3_WLOW2 (1 << 11) +#define MC13783_ADC3_WLOW3 (1 << 12) +#define MC13783_ADC3_WLOW4 (1 << 13) +#define MC13783_ADC3_WLOW5 (1 << 14) +#define MC13783_ADC3_ADCBIS2 (1 << 23) + +#define MC13783_ADC4_ADDBIS10 (1 << 2) +#define MC13783_ADC4_ADDBIS11 (1 << 3) +#define MC13783_ADC4_ADDBIS12 (1 << 4) +#define MC13783_ADC4_ADDBIS13 (1 << 5) +#define MC13783_ADC4_ADDBIS14 (1 << 6) +#define MC13783_ADC4_ADDBIS15 (1 << 7) +#define MC13783_ADC4_ADDBIS16 (1 << 8) +#define MC13783_ADC4_ADDBIS17 (1 << 9) +#define MC13783_ADC4_ADDBIS18 (1 << 10) +#define MC13783_ADC4_ADDBIS19 (1 << 11) +#define MC13783_ADC4_ADDBIS20 (1 << 14) +#define MC13783_ADC4_ADDBIS21 (1 << 15) +#define MC13783_ADC4_ADDBIS22 (1 << 16) +#define MC13783_ADC4_ADDBIS23 (1 << 17) +#define MC13783_ADC4_ADDBIS24 (1 << 18) +#define MC13783_ADC4_ADDBIS25 (1 << 19) +#define MC13783_ADC4_ADDBIS26 (1 << 20) +#define MC13783_ADC4_ADDBIS27 (1 << 21) +#define MC13783_ADC4_ADDBIS28 (1 << 22) +#define MC13783_ADC4_ADDBIS29 (1 << 23) + +#endif /* __LINUX_MFD_MC13783_PRIV_H */ + diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h new file mode 100644 index 000000000000..b3a2a7243573 --- /dev/null +++ b/include/linux/mfd/mc13783.h @@ -0,0 +1,84 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __INCLUDE_LINUX_MFD_MC13783_H +#define __INCLUDE_LINUX_MFD_MC13783_H + +struct mc13783; +struct regulator_init_data; + +struct mc13783_regulator_init_data { + int id; + struct regulator_init_data *init_data; +}; + +struct mc13783_platform_data { + struct mc13783_regulator_init_data *regulators; + int num_regulators; + unsigned int flags; +}; + +/* mc13783_platform_data flags */ +#define MC13783_USE_TOUCHSCREEN (1 << 0) +#define MC13783_USE_CODEC (1 << 1) +#define MC13783_USE_ADC (1 << 2) +#define MC13783_USE_RTC (1 << 3) +#define MC13783_USE_REGULATOR (1 << 4) + +int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, + unsigned int channel, unsigned int *sample); + +void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status); + +#define MC13783_SW_SW1A 0 +#define MC13783_SW_SW1B 1 +#define MC13783_SW_SW2A 2 +#define MC13783_SW_SW2B 3 +#define MC13783_SW_SW3 4 +#define MC13783_SW_PLL 5 +#define MC13783_REGU_VAUDIO 6 +#define MC13783_REGU_VIOHI 7 +#define MC13783_REGU_VIOLO 8 +#define MC13783_REGU_VDIG 9 +#define MC13783_REGU_VGEN 10 +#define MC13783_REGU_VRFDIG 11 +#define MC13783_REGU_VRFREF 12 +#define MC13783_REGU_VRFCP 13 +#define MC13783_REGU_VSIM 14 +#define MC13783_REGU_VESIM 15 +#define MC13783_REGU_VCAM 16 +#define MC13783_REGU_VRFBG 17 +#define MC13783_REGU_VVIB 18 +#define MC13783_REGU_VRF1 19 +#define MC13783_REGU_VRF2 20 +#define MC13783_REGU_VMMC1 21 +#define MC13783_REGU_VMMC2 22 +#define MC13783_REGU_GPO1 23 +#define MC13783_REGU_GPO2 24 +#define MC13783_REGU_GPO3 25 +#define MC13783_REGU_GPO4 26 +#define MC13783_REGU_V1 27 +#define MC13783_REGU_V2 28 +#define MC13783_REGU_V3 29 +#define MC13783_REGU_V4 30 + +#endif /* __INCLUDE_LINUX_MFD_MC13783_H */ + diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h index 56669b4183ad..b35e62801ffa 100644 --- a/include/linux/mfd/pcf50633/adc.h +++ b/include/linux/mfd/pcf50633/adc.h @@ -25,7 +25,8 @@ #define PCF50633_REG_ADCS3 0x57 #define PCF50633_ADCC1_ADCSTART 0x01 -#define PCF50633_ADCC1_RES_10BIT 0x02 +#define PCF50633_ADCC1_RES_8BIT 0x02 +#define PCF50633_ADCC1_RES_10BIT 0x00 #define PCF50633_ADCC1_AVERAGE_NO 0x00 #define PCF50633_ADCC1_AVERAGE_4 0x04 #define PCF50633_ADCC1_AVERAGE_8 0x08 diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index c8f51c3c0a72..9aba7b779fbc 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -136,6 +136,7 @@ struct pcf50633 { int irq; struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ]; struct work_struct irq_work; + struct workqueue_struct *work_queue; struct mutex lock; u8 mask_regs[5]; diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h new file mode 100644 index 000000000000..b132067e9e99 --- /dev/null +++ b/include/linux/mfd/wm831x/auxadc.h @@ -0,0 +1,216 @@ +/* + * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_AUXADC_H__ +#define __MFD_WM831X_AUXADC_H__ + +/* + * R16429 (0x402D) - AuxADC Data + */ +#define WM831X_AUX_DATA_SRC_MASK 0xF000 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_SRC_SHIFT 12 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_SRC_WIDTH 4 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_MASK 0x0FFF /* AUX_DATA - [11:0] */ +#define WM831X_AUX_DATA_SHIFT 0 /* AUX_DATA - [11:0] */ +#define WM831X_AUX_DATA_WIDTH 12 /* AUX_DATA - [11:0] */ + +/* + * R16430 (0x402E) - AuxADC Control + */ +#define WM831X_AUX_ENA 0x8000 /* AUX_ENA */ +#define WM831X_AUX_ENA_MASK 0x8000 /* AUX_ENA */ +#define WM831X_AUX_ENA_SHIFT 15 /* AUX_ENA */ +#define WM831X_AUX_ENA_WIDTH 1 /* AUX_ENA */ +#define WM831X_AUX_CVT_ENA 0x4000 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_MASK 0x4000 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_SHIFT 14 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_WIDTH 1 /* AUX_CVT_ENA */ +#define WM831X_AUX_SLPENA 0x1000 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_MASK 0x1000 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_SHIFT 12 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_WIDTH 1 /* AUX_SLPENA */ +#define WM831X_AUX_FRC_ENA 0x0800 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_MASK 0x0800 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_SHIFT 11 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_WIDTH 1 /* AUX_FRC_ENA */ +#define WM831X_AUX_RATE_MASK 0x003F /* AUX_RATE - [5:0] */ +#define WM831X_AUX_RATE_SHIFT 0 /* AUX_RATE - [5:0] */ +#define WM831X_AUX_RATE_WIDTH 6 /* AUX_RATE - [5:0] */ + +/* + * R16431 (0x402F) - AuxADC Source + */ +#define WM831X_AUX_CAL_SEL 0x8000 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_MASK 0x8000 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_SHIFT 15 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_WIDTH 1 /* AUX_CAL_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL 0x0400 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_MASK 0x0400 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_SHIFT 10 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_WIDTH 1 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_WALL_SEL 0x0200 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_MASK 0x0200 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_SHIFT 9 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_WIDTH 1 /* AUX_WALL_SEL */ +#define WM831X_AUX_BATT_SEL 0x0100 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_MASK 0x0100 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_SHIFT 8 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_WIDTH 1 /* AUX_BATT_SEL */ +#define WM831X_AUX_USB_SEL 0x0080 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_MASK 0x0080 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_SHIFT 7 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_WIDTH 1 /* AUX_USB_SEL */ +#define WM831X_AUX_SYSVDD_SEL 0x0040 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_MASK 0x0040 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_SHIFT 6 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_WIDTH 1 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL 0x0020 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_MASK 0x0020 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_SHIFT 5 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_WIDTH 1 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL 0x0010 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_MASK 0x0010 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT 4 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH 1 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_AUX4_SEL 0x0008 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_MASK 0x0008 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_SHIFT 3 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_WIDTH 1 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX3_SEL 0x0004 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_MASK 0x0004 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_SHIFT 2 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_WIDTH 1 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX2_SEL 0x0002 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_MASK 0x0002 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_SHIFT 1 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_WIDTH 1 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX1_SEL 0x0001 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_MASK 0x0001 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_SHIFT 0 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_WIDTH 1 /* AUX_AUX1_SEL */ + +/* + * R16432 (0x4030) - Comparator Control + */ +#define WM831X_DCOMP4_STS 0x0800 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_MASK 0x0800 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_SHIFT 11 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_WIDTH 1 /* DCOMP4_STS */ +#define WM831X_DCOMP3_STS 0x0400 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_MASK 0x0400 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_SHIFT 10 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_WIDTH 1 /* DCOMP3_STS */ +#define WM831X_DCOMP2_STS 0x0200 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_MASK 0x0200 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_SHIFT 9 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_WIDTH 1 /* DCOMP2_STS */ +#define WM831X_DCOMP1_STS 0x0100 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_MASK 0x0100 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_SHIFT 8 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_WIDTH 1 /* DCOMP1_STS */ +#define WM831X_DCMP4_ENA 0x0008 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_MASK 0x0008 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_SHIFT 3 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_WIDTH 1 /* DCMP4_ENA */ +#define WM831X_DCMP3_ENA 0x0004 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_MASK 0x0004 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_SHIFT 2 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_WIDTH 1 /* DCMP3_ENA */ +#define WM831X_DCMP2_ENA 0x0002 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_MASK 0x0002 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_SHIFT 1 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_WIDTH 1 /* DCMP2_ENA */ +#define WM831X_DCMP1_ENA 0x0001 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_MASK 0x0001 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_SHIFT 0 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_WIDTH 1 /* DCMP1_ENA */ + +/* + * R16433 (0x4031) - Comparator 1 + */ +#define WM831X_DCMP1_SRC_MASK 0xE000 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_SRC_SHIFT 13 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_SRC_WIDTH 3 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_GT 0x1000 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_MASK 0x1000 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_SHIFT 12 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_WIDTH 1 /* DCMP1_GT */ +#define WM831X_DCMP1_THR_MASK 0x0FFF /* DCMP1_THR - [11:0] */ +#define WM831X_DCMP1_THR_SHIFT 0 /* DCMP1_THR - [11:0] */ +#define WM831X_DCMP1_THR_WIDTH 12 /* DCMP1_THR - [11:0] */ + +/* + * R16434 (0x4032) - Comparator 2 + */ +#define WM831X_DCMP2_SRC_MASK 0xE000 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_SRC_SHIFT 13 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_SRC_WIDTH 3 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_GT 0x1000 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_MASK 0x1000 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_SHIFT 12 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_WIDTH 1 /* DCMP2_GT */ +#define WM831X_DCMP2_THR_MASK 0x0FFF /* DCMP2_THR - [11:0] */ +#define WM831X_DCMP2_THR_SHIFT 0 /* DCMP2_THR - [11:0] */ +#define WM831X_DCMP2_THR_WIDTH 12 /* DCMP2_THR - [11:0] */ + +/* + * R16435 (0x4033) - Comparator 3 + */ +#define WM831X_DCMP3_SRC_MASK 0xE000 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_SRC_SHIFT 13 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_SRC_WIDTH 3 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_GT 0x1000 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_MASK 0x1000 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_SHIFT 12 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_WIDTH 1 /* DCMP3_GT */ +#define WM831X_DCMP3_THR_MASK 0x0FFF /* DCMP3_THR - [11:0] */ +#define WM831X_DCMP3_THR_SHIFT 0 /* DCMP3_THR - [11:0] */ +#define WM831X_DCMP3_THR_WIDTH 12 /* DCMP3_THR - [11:0] */ + +/* + * R16436 (0x4034) - Comparator 4 + */ +#define WM831X_DCMP4_SRC_MASK 0xE000 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_SRC_SHIFT 13 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_SRC_WIDTH 3 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_GT 0x1000 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_MASK 0x1000 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_SHIFT 12 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_WIDTH 1 /* DCMP4_GT */ +#define WM831X_DCMP4_THR_MASK 0x0FFF /* DCMP4_THR - [11:0] */ +#define WM831X_DCMP4_THR_SHIFT 0 /* DCMP4_THR - [11:0] */ +#define WM831X_DCMP4_THR_WIDTH 12 /* DCMP4_THR - [11:0] */ + +#define WM831X_AUX_CAL_FACTOR 0xfff +#define WM831X_AUX_CAL_NOMINAL 0x222 + +enum wm831x_auxadc { + WM831X_AUX_CAL = 15, + WM831X_AUX_BKUP_BATT = 10, + WM831X_AUX_WALL = 9, + WM831X_AUX_BATT = 8, + WM831X_AUX_USB = 7, + WM831X_AUX_SYSVDD = 6, + WM831X_AUX_BATT_TEMP = 5, + WM831X_AUX_CHIP_TEMP = 4, + WM831X_AUX_AUX4 = 3, + WM831X_AUX_AUX3 = 2, + WM831X_AUX_AUX2 = 1, + WM831X_AUX_AUX1 = 0, +}; + +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input); +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input); + +#endif diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h new file mode 100644 index 000000000000..91eb493bf14c --- /dev/null +++ b/include/linux/mfd/wm831x/core.h @@ -0,0 +1,289 @@ +/* + * include/linux/mfd/wm831x/core.h -- Core interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_CORE_H__ +#define __MFD_WM831X_CORE_H__ + +#include <linux/interrupt.h> +#include <linux/workqueue.h> + +/* + * Register values. + */ +#define WM831X_RESET_ID 0x00 +#define WM831X_REVISION 0x01 +#define WM831X_PARENT_ID 0x4000 +#define WM831X_SYSVDD_CONTROL 0x4001 +#define WM831X_THERMAL_MONITORING 0x4002 +#define WM831X_POWER_STATE 0x4003 +#define WM831X_WATCHDOG 0x4004 +#define WM831X_ON_PIN_CONTROL 0x4005 +#define WM831X_RESET_CONTROL 0x4006 +#define WM831X_CONTROL_INTERFACE 0x4007 +#define WM831X_SECURITY_KEY 0x4008 +#define WM831X_SOFTWARE_SCRATCH 0x4009 +#define WM831X_OTP_CONTROL 0x400A +#define WM831X_GPIO_LEVEL 0x400C +#define WM831X_SYSTEM_STATUS 0x400D +#define WM831X_ON_SOURCE 0x400E +#define WM831X_OFF_SOURCE 0x400F +#define WM831X_SYSTEM_INTERRUPTS 0x4010 +#define WM831X_INTERRUPT_STATUS_1 0x4011 +#define WM831X_INTERRUPT_STATUS_2 0x4012 +#define WM831X_INTERRUPT_STATUS_3 0x4013 +#define WM831X_INTERRUPT_STATUS_4 0x4014 +#define WM831X_INTERRUPT_STATUS_5 0x4015 +#define WM831X_IRQ_CONFIG 0x4017 +#define WM831X_SYSTEM_INTERRUPTS_MASK 0x4018 +#define WM831X_INTERRUPT_STATUS_1_MASK 0x4019 +#define WM831X_INTERRUPT_STATUS_2_MASK 0x401A +#define WM831X_INTERRUPT_STATUS_3_MASK 0x401B +#define WM831X_INTERRUPT_STATUS_4_MASK 0x401C +#define WM831X_INTERRUPT_STATUS_5_MASK 0x401D +#define WM831X_RTC_WRITE_COUNTER 0x4020 +#define WM831X_RTC_TIME_1 0x4021 +#define WM831X_RTC_TIME_2 0x4022 +#define WM831X_RTC_ALARM_1 0x4023 +#define WM831X_RTC_ALARM_2 0x4024 +#define WM831X_RTC_CONTROL 0x4025 +#define WM831X_RTC_TRIM 0x4026 +#define WM831X_TOUCH_CONTROL_1 0x4028 +#define WM831X_TOUCH_CONTROL_2 0x4029 +#define WM831X_TOUCH_DATA_X 0x402A +#define WM831X_TOUCH_DATA_Y 0x402B +#define WM831X_TOUCH_DATA_Z 0x402C +#define WM831X_AUXADC_DATA 0x402D +#define WM831X_AUXADC_CONTROL 0x402E +#define WM831X_AUXADC_SOURCE 0x402F +#define WM831X_COMPARATOR_CONTROL 0x4030 +#define WM831X_COMPARATOR_1 0x4031 +#define WM831X_COMPARATOR_2 0x4032 +#define WM831X_COMPARATOR_3 0x4033 +#define WM831X_COMPARATOR_4 0x4034 +#define WM831X_GPIO1_CONTROL 0x4038 +#define WM831X_GPIO2_CONTROL 0x4039 +#define WM831X_GPIO3_CONTROL 0x403A +#define WM831X_GPIO4_CONTROL 0x403B +#define WM831X_GPIO5_CONTROL 0x403C +#define WM831X_GPIO6_CONTROL 0x403D +#define WM831X_GPIO7_CONTROL 0x403E +#define WM831X_GPIO8_CONTROL 0x403F +#define WM831X_GPIO9_CONTROL 0x4040 +#define WM831X_GPIO10_CONTROL 0x4041 +#define WM831X_GPIO11_CONTROL 0x4042 +#define WM831X_GPIO12_CONTROL 0x4043 +#define WM831X_GPIO13_CONTROL 0x4044 +#define WM831X_GPIO14_CONTROL 0x4045 +#define WM831X_GPIO15_CONTROL 0x4046 +#define WM831X_GPIO16_CONTROL 0x4047 +#define WM831X_CHARGER_CONTROL_1 0x4048 +#define WM831X_CHARGER_CONTROL_2 0x4049 +#define WM831X_CHARGER_STATUS 0x404A +#define WM831X_BACKUP_CHARGER_CONTROL 0x404B +#define WM831X_STATUS_LED_1 0x404C +#define WM831X_STATUS_LED_2 0x404D +#define WM831X_CURRENT_SINK_1 0x404E +#define WM831X_CURRENT_SINK_2 0x404F +#define WM831X_DCDC_ENABLE 0x4050 +#define WM831X_LDO_ENABLE 0x4051 +#define WM831X_DCDC_STATUS 0x4052 +#define WM831X_LDO_STATUS 0x4053 +#define WM831X_DCDC_UV_STATUS 0x4054 +#define WM831X_LDO_UV_STATUS 0x4055 +#define WM831X_DC1_CONTROL_1 0x4056 +#define WM831X_DC1_CONTROL_2 0x4057 +#define WM831X_DC1_ON_CONFIG 0x4058 +#define WM831X_DC1_SLEEP_CONTROL 0x4059 +#define WM831X_DC1_DVS_CONTROL 0x405A +#define WM831X_DC2_CONTROL_1 0x405B +#define WM831X_DC2_CONTROL_2 0x405C +#define WM831X_DC2_ON_CONFIG 0x405D +#define WM831X_DC2_SLEEP_CONTROL 0x405E +#define WM831X_DC2_DVS_CONTROL 0x405F +#define WM831X_DC3_CONTROL_1 0x4060 +#define WM831X_DC3_CONTROL_2 0x4061 +#define WM831X_DC3_ON_CONFIG 0x4062 +#define WM831X_DC3_SLEEP_CONTROL 0x4063 +#define WM831X_DC4_CONTROL 0x4064 +#define WM831X_DC4_SLEEP_CONTROL 0x4065 +#define WM831X_EPE1_CONTROL 0x4066 +#define WM831X_EPE2_CONTROL 0x4067 +#define WM831X_LDO1_CONTROL 0x4068 +#define WM831X_LDO1_ON_CONTROL 0x4069 +#define WM831X_LDO1_SLEEP_CONTROL 0x406A +#define WM831X_LDO2_CONTROL 0x406B +#define WM831X_LDO2_ON_CONTROL 0x406C +#define WM831X_LDO2_SLEEP_CONTROL 0x406D +#define WM831X_LDO3_CONTROL 0x406E +#define WM831X_LDO3_ON_CONTROL 0x406F +#define WM831X_LDO3_SLEEP_CONTROL 0x4070 +#define WM831X_LDO4_CONTROL 0x4071 +#define WM831X_LDO4_ON_CONTROL 0x4072 +#define WM831X_LDO4_SLEEP_CONTROL 0x4073 +#define WM831X_LDO5_CONTROL 0x4074 +#define WM831X_LDO5_ON_CONTROL 0x4075 +#define WM831X_LDO5_SLEEP_CONTROL 0x4076 +#define WM831X_LDO6_CONTROL 0x4077 +#define WM831X_LDO6_ON_CONTROL 0x4078 +#define WM831X_LDO6_SLEEP_CONTROL 0x4079 +#define WM831X_LDO7_CONTROL 0x407A +#define WM831X_LDO7_ON_CONTROL 0x407B +#define WM831X_LDO7_SLEEP_CONTROL 0x407C +#define WM831X_LDO8_CONTROL 0x407D +#define WM831X_LDO8_ON_CONTROL 0x407E +#define WM831X_LDO8_SLEEP_CONTROL 0x407F +#define WM831X_LDO9_CONTROL 0x4080 +#define WM831X_LDO9_ON_CONTROL 0x4081 +#define WM831X_LDO9_SLEEP_CONTROL 0x4082 +#define WM831X_LDO10_CONTROL 0x4083 +#define WM831X_LDO10_ON_CONTROL 0x4084 +#define WM831X_LDO10_SLEEP_CONTROL 0x4085 +#define WM831X_LDO11_ON_CONTROL 0x4087 +#define WM831X_LDO11_SLEEP_CONTROL 0x4088 +#define WM831X_POWER_GOOD_SOURCE_1 0x408E +#define WM831X_POWER_GOOD_SOURCE_2 0x408F +#define WM831X_CLOCK_CONTROL_1 0x4090 +#define WM831X_CLOCK_CONTROL_2 0x4091 +#define WM831X_FLL_CONTROL_1 0x4092 +#define WM831X_FLL_CONTROL_2 0x4093 +#define WM831X_FLL_CONTROL_3 0x4094 +#define WM831X_FLL_CONTROL_4 0x4095 +#define WM831X_FLL_CONTROL_5 0x4096 +#define WM831X_UNIQUE_ID_1 0x7800 +#define WM831X_UNIQUE_ID_2 0x7801 +#define WM831X_UNIQUE_ID_3 0x7802 +#define WM831X_UNIQUE_ID_4 0x7803 +#define WM831X_UNIQUE_ID_5 0x7804 +#define WM831X_UNIQUE_ID_6 0x7805 +#define WM831X_UNIQUE_ID_7 0x7806 +#define WM831X_UNIQUE_ID_8 0x7807 +#define WM831X_FACTORY_OTP_ID 0x7808 +#define WM831X_FACTORY_OTP_1 0x7809 +#define WM831X_FACTORY_OTP_2 0x780A +#define WM831X_FACTORY_OTP_3 0x780B +#define WM831X_FACTORY_OTP_4 0x780C +#define WM831X_FACTORY_OTP_5 0x780D +#define WM831X_CUSTOMER_OTP_ID 0x7810 +#define WM831X_DC1_OTP_CONTROL 0x7811 +#define WM831X_DC2_OTP_CONTROL 0x7812 +#define WM831X_DC3_OTP_CONTROL 0x7813 +#define WM831X_LDO1_2_OTP_CONTROL 0x7814 +#define WM831X_LDO3_4_OTP_CONTROL 0x7815 +#define WM831X_LDO5_6_OTP_CONTROL 0x7816 +#define WM831X_LDO7_8_OTP_CONTROL 0x7817 +#define WM831X_LDO9_10_OTP_CONTROL 0x7818 +#define WM831X_LDO11_EPE_CONTROL 0x7819 +#define WM831X_GPIO1_OTP_CONTROL 0x781A +#define WM831X_GPIO2_OTP_CONTROL 0x781B +#define WM831X_GPIO3_OTP_CONTROL 0x781C +#define WM831X_GPIO4_OTP_CONTROL 0x781D +#define WM831X_GPIO5_OTP_CONTROL 0x781E +#define WM831X_GPIO6_OTP_CONTROL 0x781F +#define WM831X_DBE_CHECK_DATA 0x7827 + +/* + * R0 (0x00) - Reset ID + */ +#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */ + +/* + * R1 (0x01) - Revision + */ +#define WM831X_PARENT_REV_MASK 0xFF00 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_SHIFT 8 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_WIDTH 8 /* PARENT_REV - [15:8] */ +#define WM831X_CHILD_REV_MASK 0x00FF /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_SHIFT 0 /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_WIDTH 8 /* CHILD_REV - [7:0] */ + +/* + * R16384 (0x4000) - Parent ID + */ +#define WM831X_PARENT_ID_MASK 0xFFFF /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */ + +/* + * R16389 (0x4005) - ON Pin Control + */ +#define WM831X_ON_PIN_SECACT_MASK 0x0300 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_SECACT_SHIFT 8 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_SECACT_WIDTH 2 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_PRIMACT_MASK 0x0030 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_PRIMACT_SHIFT 4 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_PRIMACT_WIDTH 2 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_STS 0x0008 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_MASK 0x0008 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_SHIFT 3 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_WIDTH 1 /* ON_PIN_STS */ +#define WM831X_ON_PIN_TO_MASK 0x0003 /* ON_PIN_TO - [1:0] */ +#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */ +#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */ + +struct regulator_dev; + +struct wm831x { + struct mutex io_lock; + + struct device *dev; + int (*read_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest); + int (*write_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src); + + void *control_data; + + int irq; /* Our chip IRQ */ + struct mutex irq_lock; + struct workqueue_struct *irq_wq; + struct work_struct irq_work; + unsigned int irq_base; + int irq_masks[5]; + + struct mutex auxadc_lock; + + /* The WM831x has a security key blocking access to certain + * registers. The mutex is taken by the accessors for locking + * and unlocking the security key, locked is used to fail + * writes if the lock is held. + */ + struct mutex key_lock; + unsigned int locked:1; +}; + +/* Device I/O API */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg); +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val); +void wm831x_reg_lock(struct wm831x *wm831x); +int wm831x_reg_unlock(struct wm831x *wm831x); +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val); +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf); + +int wm831x_irq_init(struct wm831x *wm831x, int irq); +void wm831x_irq_exit(struct wm831x *wm831x); + +int __must_check wm831x_request_irq(struct wm831x *wm831x, + unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, + void *dev); +void wm831x_free_irq(struct wm831x *wm831x, unsigned int, void *); +void wm831x_disable_irq(struct wm831x *wm831x, int irq); +void wm831x_enable_irq(struct wm831x *wm831x, int irq); + +#endif diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h new file mode 100644 index 000000000000..2835614af0e3 --- /dev/null +++ b/include/linux/mfd/wm831x/gpio.h @@ -0,0 +1,55 @@ +/* + * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_GPIO_H__ +#define __MFD_WM831X_GPIO_H__ + +/* + * R16440-16455 (0x4038-0x4047) - GPIOx Control + */ +#define WM831X_GPN_DIR 0x8000 /* GPN_DIR */ +#define WM831X_GPN_DIR_MASK 0x8000 /* GPN_DIR */ +#define WM831X_GPN_DIR_SHIFT 15 /* GPN_DIR */ +#define WM831X_GPN_DIR_WIDTH 1 /* GPN_DIR */ +#define WM831X_GPN_PULL_MASK 0x6000 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_PULL_SHIFT 13 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_PULL_WIDTH 2 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_INT_MODE 0x1000 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_MASK 0x1000 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_SHIFT 12 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_WIDTH 1 /* GPN_INT_MODE */ +#define WM831X_GPN_PWR_DOM 0x0800 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_MASK 0x0800 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_SHIFT 11 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_WIDTH 1 /* GPN_PWR_DOM */ +#define WM831X_GPN_POL 0x0400 /* GPN_POL */ +#define WM831X_GPN_POL_MASK 0x0400 /* GPN_POL */ +#define WM831X_GPN_POL_SHIFT 10 /* GPN_POL */ +#define WM831X_GPN_POL_WIDTH 1 /* GPN_POL */ +#define WM831X_GPN_OD 0x0200 /* GPN_OD */ +#define WM831X_GPN_OD_MASK 0x0200 /* GPN_OD */ +#define WM831X_GPN_OD_SHIFT 9 /* GPN_OD */ +#define WM831X_GPN_OD_WIDTH 1 /* GPN_OD */ +#define WM831X_GPN_TRI 0x0080 /* GPN_TRI */ +#define WM831X_GPN_TRI_MASK 0x0080 /* GPN_TRI */ +#define WM831X_GPN_TRI_SHIFT 7 /* GPN_TRI */ +#define WM831X_GPN_TRI_WIDTH 1 /* GPN_TRI */ +#define WM831X_GPN_FN_MASK 0x000F /* GPN_FN - [3:0] */ +#define WM831X_GPN_FN_SHIFT 0 /* GPN_FN - [3:0] */ +#define WM831X_GPN_FN_WIDTH 4 /* GPN_FN - [3:0] */ + +#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT) +#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT) +#define WM831X_GPIO_PULL_UP (2 << WM831X_GPN_PULL_SHIFT) +#endif diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h new file mode 100644 index 000000000000..3a8c97656fda --- /dev/null +++ b/include/linux/mfd/wm831x/irq.h @@ -0,0 +1,764 @@ +/* + * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_IRQ_H__ +#define __MFD_WM831X_IRQ_H__ + +/* Interrupt number assignments within Linux */ +#define WM831X_IRQ_TEMP_THW 0 +#define WM831X_IRQ_GPIO_1 1 +#define WM831X_IRQ_GPIO_2 2 +#define WM831X_IRQ_GPIO_3 3 +#define WM831X_IRQ_GPIO_4 4 +#define WM831X_IRQ_GPIO_5 5 +#define WM831X_IRQ_GPIO_6 6 +#define WM831X_IRQ_GPIO_7 7 +#define WM831X_IRQ_GPIO_8 8 +#define WM831X_IRQ_GPIO_9 9 +#define WM831X_IRQ_GPIO_10 10 +#define WM831X_IRQ_GPIO_11 11 +#define WM831X_IRQ_GPIO_12 12 +#define WM831X_IRQ_GPIO_13 13 +#define WM831X_IRQ_GPIO_14 14 +#define WM831X_IRQ_GPIO_15 15 +#define WM831X_IRQ_GPIO_16 16 +#define WM831X_IRQ_ON 17 +#define WM831X_IRQ_PPM_SYSLO 18 +#define WM831X_IRQ_PPM_PWR_SRC 19 +#define WM831X_IRQ_PPM_USB_CURR 20 +#define WM831X_IRQ_WDOG_TO 21 +#define WM831X_IRQ_RTC_PER 22 +#define WM831X_IRQ_RTC_ALM 23 +#define WM831X_IRQ_CHG_BATT_HOT 24 +#define WM831X_IRQ_CHG_BATT_COLD 25 +#define WM831X_IRQ_CHG_BATT_FAIL 26 +#define WM831X_IRQ_CHG_OV 27 +#define WM831X_IRQ_CHG_END 29 +#define WM831X_IRQ_CHG_TO 30 +#define WM831X_IRQ_CHG_MODE 31 +#define WM831X_IRQ_CHG_START 32 +#define WM831X_IRQ_TCHDATA 33 +#define WM831X_IRQ_TCHPD 34 +#define WM831X_IRQ_AUXADC_DATA 35 +#define WM831X_IRQ_AUXADC_DCOMP1 36 +#define WM831X_IRQ_AUXADC_DCOMP2 37 +#define WM831X_IRQ_AUXADC_DCOMP3 38 +#define WM831X_IRQ_AUXADC_DCOMP4 39 +#define WM831X_IRQ_CS1 40 +#define WM831X_IRQ_CS2 41 +#define WM831X_IRQ_HC_DC1 42 +#define WM831X_IRQ_HC_DC2 43 +#define WM831X_IRQ_UV_LDO1 44 +#define WM831X_IRQ_UV_LDO2 45 +#define WM831X_IRQ_UV_LDO3 46 +#define WM831X_IRQ_UV_LDO4 47 +#define WM831X_IRQ_UV_LDO5 48 +#define WM831X_IRQ_UV_LDO6 49 +#define WM831X_IRQ_UV_LDO7 50 +#define WM831X_IRQ_UV_LDO8 51 +#define WM831X_IRQ_UV_LDO9 52 +#define WM831X_IRQ_UV_LDO10 53 +#define WM831X_IRQ_UV_DC1 54 +#define WM831X_IRQ_UV_DC2 55 +#define WM831X_IRQ_UV_DC3 56 +#define WM831X_IRQ_UV_DC4 57 + +#define WM831X_NUM_IRQS 58 + +/* + * R16400 (0x4010) - System Interrupts + */ +#define WM831X_PS_INT 0x8000 /* PS_INT */ +#define WM831X_PS_INT_MASK 0x8000 /* PS_INT */ +#define WM831X_PS_INT_SHIFT 15 /* PS_INT */ +#define WM831X_PS_INT_WIDTH 1 /* PS_INT */ +#define WM831X_TEMP_INT 0x4000 /* TEMP_INT */ +#define WM831X_TEMP_INT_MASK 0x4000 /* TEMP_INT */ +#define WM831X_TEMP_INT_SHIFT 14 /* TEMP_INT */ +#define WM831X_TEMP_INT_WIDTH 1 /* TEMP_INT */ +#define WM831X_GP_INT 0x2000 /* GP_INT */ +#define WM831X_GP_INT_MASK 0x2000 /* GP_INT */ +#define WM831X_GP_INT_SHIFT 13 /* GP_INT */ +#define WM831X_GP_INT_WIDTH 1 /* GP_INT */ +#define WM831X_ON_PIN_INT 0x1000 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_MASK 0x1000 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_SHIFT 12 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_WIDTH 1 /* ON_PIN_INT */ +#define WM831X_WDOG_INT 0x0800 /* WDOG_INT */ +#define WM831X_WDOG_INT_MASK 0x0800 /* WDOG_INT */ +#define WM831X_WDOG_INT_SHIFT 11 /* WDOG_INT */ +#define WM831X_WDOG_INT_WIDTH 1 /* WDOG_INT */ +#define WM831X_TCHDATA_INT 0x0400 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_MASK 0x0400 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_SHIFT 10 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_WIDTH 1 /* TCHDATA_INT */ +#define WM831X_TCHPD_INT 0x0200 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_MASK 0x0200 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_SHIFT 9 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_WIDTH 1 /* TCHPD_INT */ +#define WM831X_AUXADC_INT 0x0100 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_MASK 0x0100 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_SHIFT 8 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_WIDTH 1 /* AUXADC_INT */ +#define WM831X_PPM_INT 0x0080 /* PPM_INT */ +#define WM831X_PPM_INT_MASK 0x0080 /* PPM_INT */ +#define WM831X_PPM_INT_SHIFT 7 /* PPM_INT */ +#define WM831X_PPM_INT_WIDTH 1 /* PPM_INT */ +#define WM831X_CS_INT 0x0040 /* CS_INT */ +#define WM831X_CS_INT_MASK 0x0040 /* CS_INT */ +#define WM831X_CS_INT_SHIFT 6 /* CS_INT */ +#define WM831X_CS_INT_WIDTH 1 /* CS_INT */ +#define WM831X_RTC_INT 0x0020 /* RTC_INT */ +#define WM831X_RTC_INT_MASK 0x0020 /* RTC_INT */ +#define WM831X_RTC_INT_SHIFT 5 /* RTC_INT */ +#define WM831X_RTC_INT_WIDTH 1 /* RTC_INT */ +#define WM831X_OTP_INT 0x0010 /* OTP_INT */ +#define WM831X_OTP_INT_MASK 0x0010 /* OTP_INT */ +#define WM831X_OTP_INT_SHIFT 4 /* OTP_INT */ +#define WM831X_OTP_INT_WIDTH 1 /* OTP_INT */ +#define WM831X_CHILD_INT 0x0008 /* CHILD_INT */ +#define WM831X_CHILD_INT_MASK 0x0008 /* CHILD_INT */ +#define WM831X_CHILD_INT_SHIFT 3 /* CHILD_INT */ +#define WM831X_CHILD_INT_WIDTH 1 /* CHILD_INT */ +#define WM831X_CHG_INT 0x0004 /* CHG_INT */ +#define WM831X_CHG_INT_MASK 0x0004 /* CHG_INT */ +#define WM831X_CHG_INT_SHIFT 2 /* CHG_INT */ +#define WM831X_CHG_INT_WIDTH 1 /* CHG_INT */ +#define WM831X_HC_INT 0x0002 /* HC_INT */ +#define WM831X_HC_INT_MASK 0x0002 /* HC_INT */ +#define WM831X_HC_INT_SHIFT 1 /* HC_INT */ +#define WM831X_HC_INT_WIDTH 1 /* HC_INT */ +#define WM831X_UV_INT 0x0001 /* UV_INT */ +#define WM831X_UV_INT_MASK 0x0001 /* UV_INT */ +#define WM831X_UV_INT_SHIFT 0 /* UV_INT */ +#define WM831X_UV_INT_WIDTH 1 /* UV_INT */ + +/* + * R16401 (0x4011) - Interrupt Status 1 + */ +#define WM831X_PPM_SYSLO_EINT 0x8000 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_MASK 0x8000 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_SHIFT 15 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_WIDTH 1 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_PWR_SRC_EINT 0x4000 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_MASK 0x4000 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_SHIFT 14 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_WIDTH 1 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_USB_CURR_EINT 0x2000 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_MASK 0x2000 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_SHIFT 13 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_WIDTH 1 /* PPM_USB_CURR_EINT */ +#define WM831X_ON_PIN_EINT 0x1000 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_MASK 0x1000 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_SHIFT 12 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_WIDTH 1 /* ON_PIN_EINT */ +#define WM831X_WDOG_TO_EINT 0x0800 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_MASK 0x0800 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_SHIFT 11 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_WIDTH 1 /* WDOG_TO_EINT */ +#define WM831X_TCHDATA_EINT 0x0400 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_MASK 0x0400 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_SHIFT 10 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_WIDTH 1 /* TCHDATA_EINT */ +#define WM831X_TCHPD_EINT 0x0200 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_MASK 0x0200 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_SHIFT 9 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_WIDTH 1 /* TCHPD_EINT */ +#define WM831X_AUXADC_DATA_EINT 0x0100 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_MASK 0x0100 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_SHIFT 8 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_WIDTH 1 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT 0x0080 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_MASK 0x0080 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_SHIFT 7 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_WIDTH 1 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT 0x0040 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_MASK 0x0040 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_SHIFT 6 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_WIDTH 1 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT 0x0020 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_MASK 0x0020 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_SHIFT 5 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_WIDTH 1 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT 0x0010 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_MASK 0x0010 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_SHIFT 4 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_WIDTH 1 /* AUXADC_DCOMP1_EINT */ +#define WM831X_RTC_PER_EINT 0x0008 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_MASK 0x0008 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_SHIFT 3 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_WIDTH 1 /* RTC_PER_EINT */ +#define WM831X_RTC_ALM_EINT 0x0004 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_MASK 0x0004 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_SHIFT 2 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_WIDTH 1 /* RTC_ALM_EINT */ +#define WM831X_TEMP_THW_EINT 0x0002 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_MASK 0x0002 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_SHIFT 1 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_WIDTH 1 /* TEMP_THW_EINT */ + +/* + * R16402 (0x4012) - Interrupt Status 2 + */ +#define WM831X_CHG_BATT_HOT_EINT 0x8000 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_MASK 0x8000 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_SHIFT 15 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_WIDTH 1 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_COLD_EINT 0x4000 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_MASK 0x4000 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_SHIFT 14 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_WIDTH 1 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT 0x2000 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_MASK 0x2000 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_SHIFT 13 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_WIDTH 1 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_OV_EINT 0x1000 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_MASK 0x1000 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_SHIFT 12 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_WIDTH 1 /* CHG_OV_EINT */ +#define WM831X_CHG_END_EINT 0x0800 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_MASK 0x0800 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_SHIFT 11 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_WIDTH 1 /* CHG_END_EINT */ +#define WM831X_CHG_TO_EINT 0x0400 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_MASK 0x0400 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_SHIFT 10 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_WIDTH 1 /* CHG_TO_EINT */ +#define WM831X_CHG_MODE_EINT 0x0200 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_MASK 0x0200 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_SHIFT 9 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_WIDTH 1 /* CHG_MODE_EINT */ +#define WM831X_CHG_START_EINT 0x0100 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_MASK 0x0100 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_SHIFT 8 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_WIDTH 1 /* CHG_START_EINT */ +#define WM831X_CS2_EINT 0x0080 /* CS2_EINT */ +#define WM831X_CS2_EINT_MASK 0x0080 /* CS2_EINT */ +#define WM831X_CS2_EINT_SHIFT 7 /* CS2_EINT */ +#define WM831X_CS2_EINT_WIDTH 1 /* CS2_EINT */ +#define WM831X_CS1_EINT 0x0040 /* CS1_EINT */ +#define WM831X_CS1_EINT_MASK 0x0040 /* CS1_EINT */ +#define WM831X_CS1_EINT_SHIFT 6 /* CS1_EINT */ +#define WM831X_CS1_EINT_WIDTH 1 /* CS1_EINT */ +#define WM831X_OTP_CMD_END_EINT 0x0020 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_MASK 0x0020 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_SHIFT 5 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_WIDTH 1 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_ERR_EINT 0x0010 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_MASK 0x0010 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_SHIFT 4 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_WIDTH 1 /* OTP_ERR_EINT */ +#define WM831X_PS_POR_EINT 0x0004 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_MASK 0x0004 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_SHIFT 2 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_WIDTH 1 /* PS_POR_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT 0x0002 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_MASK 0x0002 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_SHIFT 1 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_WIDTH 1 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_ON_WAKE_EINT 0x0001 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_MASK 0x0001 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_SHIFT 0 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_WIDTH 1 /* PS_ON_WAKE_EINT */ + +/* + * R16403 (0x4013) - Interrupt Status 3 + */ +#define WM831X_UV_LDO10_EINT 0x0200 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_MASK 0x0200 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_SHIFT 9 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_WIDTH 1 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO9_EINT 0x0100 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_MASK 0x0100 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_SHIFT 8 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_WIDTH 1 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO8_EINT 0x0080 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_MASK 0x0080 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_SHIFT 7 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_WIDTH 1 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO7_EINT 0x0040 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_MASK 0x0040 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_SHIFT 6 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_WIDTH 1 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO6_EINT 0x0020 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_MASK 0x0020 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_SHIFT 5 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_WIDTH 1 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO5_EINT 0x0010 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_MASK 0x0010 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_SHIFT 4 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_WIDTH 1 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO4_EINT 0x0008 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_MASK 0x0008 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_SHIFT 3 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_WIDTH 1 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO3_EINT 0x0004 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_MASK 0x0004 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_SHIFT 2 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_WIDTH 1 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO2_EINT 0x0002 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_MASK 0x0002 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_SHIFT 1 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_WIDTH 1 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO1_EINT 0x0001 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_MASK 0x0001 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_SHIFT 0 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_WIDTH 1 /* UV_LDO1_EINT */ + +/* + * R16404 (0x4014) - Interrupt Status 4 + */ +#define WM831X_HC_DC2_EINT 0x0200 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_MASK 0x0200 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_SHIFT 9 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_WIDTH 1 /* HC_DC2_EINT */ +#define WM831X_HC_DC1_EINT 0x0100 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_MASK 0x0100 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_SHIFT 8 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_WIDTH 1 /* HC_DC1_EINT */ +#define WM831X_UV_DC4_EINT 0x0008 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_MASK 0x0008 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_SHIFT 3 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_WIDTH 1 /* UV_DC4_EINT */ +#define WM831X_UV_DC3_EINT 0x0004 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_MASK 0x0004 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_SHIFT 2 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_WIDTH 1 /* UV_DC3_EINT */ +#define WM831X_UV_DC2_EINT 0x0002 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_MASK 0x0002 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_SHIFT 1 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_WIDTH 1 /* UV_DC2_EINT */ +#define WM831X_UV_DC1_EINT 0x0001 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_MASK 0x0001 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_SHIFT 0 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_WIDTH 1 /* UV_DC1_EINT */ + +/* + * R16405 (0x4015) - Interrupt Status 5 + */ +#define WM831X_GP16_EINT 0x8000 /* GP16_EINT */ +#define WM831X_GP16_EINT_MASK 0x8000 /* GP16_EINT */ +#define WM831X_GP16_EINT_SHIFT 15 /* GP16_EINT */ +#define WM831X_GP16_EINT_WIDTH 1 /* GP16_EINT */ +#define WM831X_GP15_EINT 0x4000 /* GP15_EINT */ +#define WM831X_GP15_EINT_MASK 0x4000 /* GP15_EINT */ +#define WM831X_GP15_EINT_SHIFT 14 /* GP15_EINT */ +#define WM831X_GP15_EINT_WIDTH 1 /* GP15_EINT */ +#define WM831X_GP14_EINT 0x2000 /* GP14_EINT */ +#define WM831X_GP14_EINT_MASK 0x2000 /* GP14_EINT */ +#define WM831X_GP14_EINT_SHIFT 13 /* GP14_EINT */ +#define WM831X_GP14_EINT_WIDTH 1 /* GP14_EINT */ +#define WM831X_GP13_EINT 0x1000 /* GP13_EINT */ +#define WM831X_GP13_EINT_MASK 0x1000 /* GP13_EINT */ +#define WM831X_GP13_EINT_SHIFT 12 /* GP13_EINT */ +#define WM831X_GP13_EINT_WIDTH 1 /* GP13_EINT */ +#define WM831X_GP12_EINT 0x0800 /* GP12_EINT */ +#define WM831X_GP12_EINT_MASK 0x0800 /* GP12_EINT */ +#define WM831X_GP12_EINT_SHIFT 11 /* GP12_EINT */ +#define WM831X_GP12_EINT_WIDTH 1 /* GP12_EINT */ +#define WM831X_GP11_EINT 0x0400 /* GP11_EINT */ +#define WM831X_GP11_EINT_MASK 0x0400 /* GP11_EINT */ +#define WM831X_GP11_EINT_SHIFT 10 /* GP11_EINT */ +#define WM831X_GP11_EINT_WIDTH 1 /* GP11_EINT */ +#define WM831X_GP10_EINT 0x0200 /* GP10_EINT */ +#define WM831X_GP10_EINT_MASK 0x0200 /* GP10_EINT */ +#define WM831X_GP10_EINT_SHIFT 9 /* GP10_EINT */ +#define WM831X_GP10_EINT_WIDTH 1 /* GP10_EINT */ +#define WM831X_GP9_EINT 0x0100 /* GP9_EINT */ +#define WM831X_GP9_EINT_MASK 0x0100 /* GP9_EINT */ +#define WM831X_GP9_EINT_SHIFT 8 /* GP9_EINT */ +#define WM831X_GP9_EINT_WIDTH 1 /* GP9_EINT */ +#define WM831X_GP8_EINT 0x0080 /* GP8_EINT */ +#define WM831X_GP8_EINT_MASK 0x0080 /* GP8_EINT */ +#define WM831X_GP8_EINT_SHIFT 7 /* GP8_EINT */ +#define WM831X_GP8_EINT_WIDTH 1 /* GP8_EINT */ +#define WM831X_GP7_EINT 0x0040 /* GP7_EINT */ +#define WM831X_GP7_EINT_MASK 0x0040 /* GP7_EINT */ +#define WM831X_GP7_EINT_SHIFT 6 /* GP7_EINT */ +#define WM831X_GP7_EINT_WIDTH 1 /* GP7_EINT */ +#define WM831X_GP6_EINT 0x0020 /* GP6_EINT */ +#define WM831X_GP6_EINT_MASK 0x0020 /* GP6_EINT */ +#define WM831X_GP6_EINT_SHIFT 5 /* GP6_EINT */ +#define WM831X_GP6_EINT_WIDTH 1 /* GP6_EINT */ +#define WM831X_GP5_EINT 0x0010 /* GP5_EINT */ +#define WM831X_GP5_EINT_MASK 0x0010 /* GP5_EINT */ +#define WM831X_GP5_EINT_SHIFT 4 /* GP5_EINT */ +#define WM831X_GP5_EINT_WIDTH 1 /* GP5_EINT */ +#define WM831X_GP4_EINT 0x0008 /* GP4_EINT */ +#define WM831X_GP4_EINT_MASK 0x0008 /* GP4_EINT */ +#define WM831X_GP4_EINT_SHIFT 3 /* GP4_EINT */ +#define WM831X_GP4_EINT_WIDTH 1 /* GP4_EINT */ +#define WM831X_GP3_EINT 0x0004 /* GP3_EINT */ +#define WM831X_GP3_EINT_MASK 0x0004 /* GP3_EINT */ +#define WM831X_GP3_EINT_SHIFT 2 /* GP3_EINT */ +#define WM831X_GP3_EINT_WIDTH 1 /* GP3_EINT */ +#define WM831X_GP2_EINT 0x0002 /* GP2_EINT */ +#define WM831X_GP2_EINT_MASK 0x0002 /* GP2_EINT */ +#define WM831X_GP2_EINT_SHIFT 1 /* GP2_EINT */ +#define WM831X_GP2_EINT_WIDTH 1 /* GP2_EINT */ +#define WM831X_GP1_EINT 0x0001 /* GP1_EINT */ +#define WM831X_GP1_EINT_MASK 0x0001 /* GP1_EINT */ +#define WM831X_GP1_EINT_SHIFT 0 /* GP1_EINT */ +#define WM831X_GP1_EINT_WIDTH 1 /* GP1_EINT */ + +/* + * R16407 (0x4017) - IRQ Config + */ +#define WM831X_IRQ_OD 0x0002 /* IRQ_OD */ +#define WM831X_IRQ_OD_MASK 0x0002 /* IRQ_OD */ +#define WM831X_IRQ_OD_SHIFT 1 /* IRQ_OD */ +#define WM831X_IRQ_OD_WIDTH 1 /* IRQ_OD */ +#define WM831X_IM_IRQ 0x0001 /* IM_IRQ */ +#define WM831X_IM_IRQ_MASK 0x0001 /* IM_IRQ */ +#define WM831X_IM_IRQ_SHIFT 0 /* IM_IRQ */ +#define WM831X_IM_IRQ_WIDTH 1 /* IM_IRQ */ + +/* + * R16408 (0x4018) - System Interrupts Mask + */ +#define WM831X_IM_PS_INT 0x8000 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_MASK 0x8000 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_SHIFT 15 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_WIDTH 1 /* IM_PS_INT */ +#define WM831X_IM_TEMP_INT 0x4000 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_MASK 0x4000 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_SHIFT 14 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_WIDTH 1 /* IM_TEMP_INT */ +#define WM831X_IM_GP_INT 0x2000 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_MASK 0x2000 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_SHIFT 13 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_WIDTH 1 /* IM_GP_INT */ +#define WM831X_IM_ON_PIN_INT 0x1000 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_MASK 0x1000 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_SHIFT 12 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_WIDTH 1 /* IM_ON_PIN_INT */ +#define WM831X_IM_WDOG_INT 0x0800 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_MASK 0x0800 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_SHIFT 11 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_WIDTH 1 /* IM_WDOG_INT */ +#define WM831X_IM_TCHDATA_INT 0x0400 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_MASK 0x0400 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_SHIFT 10 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_WIDTH 1 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHPD_INT 0x0200 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_MASK 0x0200 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_SHIFT 9 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_WIDTH 1 /* IM_TCHPD_INT */ +#define WM831X_IM_AUXADC_INT 0x0100 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_MASK 0x0100 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_SHIFT 8 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_WIDTH 1 /* IM_AUXADC_INT */ +#define WM831X_IM_PPM_INT 0x0080 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_MASK 0x0080 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_SHIFT 7 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_WIDTH 1 /* IM_PPM_INT */ +#define WM831X_IM_CS_INT 0x0040 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_MASK 0x0040 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_SHIFT 6 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_WIDTH 1 /* IM_CS_INT */ +#define WM831X_IM_RTC_INT 0x0020 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_MASK 0x0020 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_SHIFT 5 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_WIDTH 1 /* IM_RTC_INT */ +#define WM831X_IM_OTP_INT 0x0010 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_MASK 0x0010 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_SHIFT 4 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_WIDTH 1 /* IM_OTP_INT */ +#define WM831X_IM_CHILD_INT 0x0008 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_MASK 0x0008 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_SHIFT 3 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_WIDTH 1 /* IM_CHILD_INT */ +#define WM831X_IM_CHG_INT 0x0004 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_MASK 0x0004 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_SHIFT 2 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_WIDTH 1 /* IM_CHG_INT */ +#define WM831X_IM_HC_INT 0x0002 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_MASK 0x0002 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_SHIFT 1 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_WIDTH 1 /* IM_HC_INT */ +#define WM831X_IM_UV_INT 0x0001 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_MASK 0x0001 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_SHIFT 0 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_WIDTH 1 /* IM_UV_INT */ + +/* + * R16409 (0x4019) - Interrupt Status 1 Mask + */ +#define WM831X_IM_PPM_SYSLO_EINT 0x8000 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_MASK 0x8000 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_SHIFT 15 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_WIDTH 1 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT 0x4000 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_MASK 0x4000 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT 14 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH 1 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT 0x2000 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_MASK 0x2000 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT 13 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH 1 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_ON_PIN_EINT 0x1000 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_MASK 0x1000 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_SHIFT 12 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_WIDTH 1 /* IM_ON_PIN_EINT */ +#define WM831X_IM_WDOG_TO_EINT 0x0800 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_MASK 0x0800 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_SHIFT 11 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_WIDTH 1 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_TCHDATA_EINT 0x0400 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_MASK 0x0400 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_SHIFT 10 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_WIDTH 1 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHPD_EINT 0x0200 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_MASK 0x0200 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_SHIFT 9 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_WIDTH 1 /* IM_TCHPD_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT 0x0100 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_MASK 0x0100 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_SHIFT 8 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_WIDTH 1 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT 0x0080 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK 0x0080 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT 7 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH 1 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT 0x0040 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK 0x0040 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT 6 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH 1 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT 0x0020 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK 0x0020 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT 5 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH 1 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT 0x0010 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK 0x0010 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT 4 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH 1 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_RTC_PER_EINT 0x0008 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_MASK 0x0008 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_SHIFT 3 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_WIDTH 1 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_ALM_EINT 0x0004 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_MASK 0x0004 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_SHIFT 2 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_WIDTH 1 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_TEMP_THW_EINT 0x0002 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_MASK 0x0002 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_SHIFT 1 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_WIDTH 1 /* IM_TEMP_THW_EINT */ + +/* + * R16410 (0x401A) - Interrupt Status 2 Mask + */ +#define WM831X_IM_CHG_BATT_HOT_EINT 0x8000 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_MASK 0x8000 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT 15 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH 1 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT 0x4000 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_MASK 0x4000 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT 14 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH 1 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT 0x2000 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK 0x2000 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT 13 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH 1 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_OV_EINT 0x1000 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_MASK 0x1000 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_SHIFT 12 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_WIDTH 1 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_END_EINT 0x0800 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_MASK 0x0800 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_SHIFT 11 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_WIDTH 1 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_TO_EINT 0x0400 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_MASK 0x0400 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_SHIFT 10 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_WIDTH 1 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_MODE_EINT 0x0200 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_MASK 0x0200 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_SHIFT 9 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_WIDTH 1 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_START_EINT 0x0100 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_MASK 0x0100 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_SHIFT 8 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_WIDTH 1 /* IM_CHG_START_EINT */ +#define WM831X_IM_CS2_EINT 0x0080 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_MASK 0x0080 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_SHIFT 7 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_WIDTH 1 /* IM_CS2_EINT */ +#define WM831X_IM_CS1_EINT 0x0040 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_MASK 0x0040 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_SHIFT 6 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_WIDTH 1 /* IM_CS1_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT 0x0020 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_MASK 0x0020 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_SHIFT 5 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_WIDTH 1 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_ERR_EINT 0x0010 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_MASK 0x0010 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_SHIFT 4 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_WIDTH 1 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_PS_POR_EINT 0x0004 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_MASK 0x0004 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_SHIFT 2 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_WIDTH 1 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT 0x0002 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK 0x0002 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT 1 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH 1 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT 0x0001 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_MASK 0x0001 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT 0 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH 1 /* IM_PS_ON_WAKE_EINT */ + +/* + * R16411 (0x401B) - Interrupt Status 3 Mask + */ +#define WM831X_IM_UV_LDO10_EINT 0x0200 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_MASK 0x0200 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_SHIFT 9 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_WIDTH 1 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO9_EINT 0x0100 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_MASK 0x0100 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_SHIFT 8 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_WIDTH 1 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO8_EINT 0x0080 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_MASK 0x0080 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_SHIFT 7 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_WIDTH 1 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO7_EINT 0x0040 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_MASK 0x0040 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_SHIFT 6 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_WIDTH 1 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO6_EINT 0x0020 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_MASK 0x0020 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_SHIFT 5 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_WIDTH 1 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO5_EINT 0x0010 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_MASK 0x0010 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_SHIFT 4 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_WIDTH 1 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO4_EINT 0x0008 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_MASK 0x0008 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_SHIFT 3 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_WIDTH 1 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO3_EINT 0x0004 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_MASK 0x0004 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_SHIFT 2 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_WIDTH 1 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO2_EINT 0x0002 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_MASK 0x0002 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_SHIFT 1 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_WIDTH 1 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO1_EINT 0x0001 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_MASK 0x0001 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_SHIFT 0 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_WIDTH 1 /* IM_UV_LDO1_EINT */ + +/* + * R16412 (0x401C) - Interrupt Status 4 Mask + */ +#define WM831X_IM_HC_DC2_EINT 0x0200 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_MASK 0x0200 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_SHIFT 9 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_WIDTH 1 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC1_EINT 0x0100 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_MASK 0x0100 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_SHIFT 8 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_WIDTH 1 /* IM_HC_DC1_EINT */ +#define WM831X_IM_UV_DC4_EINT 0x0008 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_MASK 0x0008 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_SHIFT 3 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_WIDTH 1 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC3_EINT 0x0004 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_MASK 0x0004 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_SHIFT 2 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_WIDTH 1 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC2_EINT 0x0002 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_MASK 0x0002 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_SHIFT 1 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_WIDTH 1 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC1_EINT 0x0001 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_MASK 0x0001 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_SHIFT 0 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_WIDTH 1 /* IM_UV_DC1_EINT */ + +/* + * R16413 (0x401D) - Interrupt Status 5 Mask + */ +#define WM831X_IM_GP16_EINT 0x8000 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_MASK 0x8000 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_SHIFT 15 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_WIDTH 1 /* IM_GP16_EINT */ +#define WM831X_IM_GP15_EINT 0x4000 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_MASK 0x4000 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_SHIFT 14 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_WIDTH 1 /* IM_GP15_EINT */ +#define WM831X_IM_GP14_EINT 0x2000 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_MASK 0x2000 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_SHIFT 13 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_WIDTH 1 /* IM_GP14_EINT */ +#define WM831X_IM_GP13_EINT 0x1000 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_MASK 0x1000 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_SHIFT 12 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_WIDTH 1 /* IM_GP13_EINT */ +#define WM831X_IM_GP12_EINT 0x0800 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_MASK 0x0800 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_SHIFT 11 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_WIDTH 1 /* IM_GP12_EINT */ +#define WM831X_IM_GP11_EINT 0x0400 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_MASK 0x0400 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_SHIFT 10 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_WIDTH 1 /* IM_GP11_EINT */ +#define WM831X_IM_GP10_EINT 0x0200 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_MASK 0x0200 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_SHIFT 9 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_WIDTH 1 /* IM_GP10_EINT */ +#define WM831X_IM_GP9_EINT 0x0100 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_MASK 0x0100 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_SHIFT 8 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_WIDTH 1 /* IM_GP9_EINT */ +#define WM831X_IM_GP8_EINT 0x0080 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_MASK 0x0080 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_SHIFT 7 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_WIDTH 1 /* IM_GP8_EINT */ +#define WM831X_IM_GP7_EINT 0x0040 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_MASK 0x0040 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_SHIFT 6 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_WIDTH 1 /* IM_GP7_EINT */ +#define WM831X_IM_GP6_EINT 0x0020 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_MASK 0x0020 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_SHIFT 5 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_WIDTH 1 /* IM_GP6_EINT */ +#define WM831X_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */ +#define WM831X_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */ +#define WM831X_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */ +#define WM831X_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */ +#define WM831X_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */ + + +#endif diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h new file mode 100644 index 000000000000..ce1f81a39bfc --- /dev/null +++ b/include/linux/mfd/wm831x/otp.h @@ -0,0 +1,162 @@ +/* + * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_OTP_H__ +#define __MFD_WM831X_OTP_H__ + +int wm831x_otp_init(struct wm831x *wm831x); +void wm831x_otp_exit(struct wm831x *wm831x); + +/* + * R30720 (0x7800) - Unique ID 1 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30721 (0x7801) - Unique ID 2 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30722 (0x7802) - Unique ID 3 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30723 (0x7803) - Unique ID 4 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30724 (0x7804) - Unique ID 5 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30725 (0x7805) - Unique ID 6 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30726 (0x7806) - Unique ID 7 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30727 (0x7807) - Unique ID 8 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30728 (0x7808) - Factory OTP ID + */ +#define WM831X_OTP_FACT_ID_MASK 0xFFFE /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_ID_SHIFT 1 /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_ID_WIDTH 15 /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_FINAL 0x0001 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_MASK 0x0001 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_SHIFT 0 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_WIDTH 1 /* OTP_FACT_FINAL */ + +/* + * R30729 (0x7809) - Factory OTP 1 + */ +#define WM831X_DC3_TRIM_MASK 0xF000 /* DC3_TRIM - [15:12] */ +#define WM831X_DC3_TRIM_SHIFT 12 /* DC3_TRIM - [15:12] */ +#define WM831X_DC3_TRIM_WIDTH 4 /* DC3_TRIM - [15:12] */ +#define WM831X_DC2_TRIM_MASK 0x0FC0 /* DC2_TRIM - [11:6] */ +#define WM831X_DC2_TRIM_SHIFT 6 /* DC2_TRIM - [11:6] */ +#define WM831X_DC2_TRIM_WIDTH 6 /* DC2_TRIM - [11:6] */ +#define WM831X_DC1_TRIM_MASK 0x003F /* DC1_TRIM - [5:0] */ +#define WM831X_DC1_TRIM_SHIFT 0 /* DC1_TRIM - [5:0] */ +#define WM831X_DC1_TRIM_WIDTH 6 /* DC1_TRIM - [5:0] */ + +/* + * R30730 (0x780A) - Factory OTP 2 + */ +#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */ + +/* + * R30731 (0x780B) - Factory OTP 3 + */ +#define WM831X_OSC_TRIM_MASK 0x0780 /* OSC_TRIM - [10:7] */ +#define WM831X_OSC_TRIM_SHIFT 7 /* OSC_TRIM - [10:7] */ +#define WM831X_OSC_TRIM_WIDTH 4 /* OSC_TRIM - [10:7] */ +#define WM831X_BG_TRIM_MASK 0x0078 /* BG_TRIM - [6:3] */ +#define WM831X_BG_TRIM_SHIFT 3 /* BG_TRIM - [6:3] */ +#define WM831X_BG_TRIM_WIDTH 4 /* BG_TRIM - [6:3] */ +#define WM831X_LPBG_TRIM_MASK 0x0007 /* LPBG_TRIM - [2:0] */ +#define WM831X_LPBG_TRIM_SHIFT 0 /* LPBG_TRIM - [2:0] */ +#define WM831X_LPBG_TRIM_WIDTH 3 /* LPBG_TRIM - [2:0] */ + +/* + * R30732 (0x780C) - Factory OTP 4 + */ +#define WM831X_CHILD_I2C_ADDR_MASK 0x00FE /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CHILD_I2C_ADDR_SHIFT 1 /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CHILD_I2C_ADDR_WIDTH 7 /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CH_AW 0x0001 /* CH_AW */ +#define WM831X_CH_AW_MASK 0x0001 /* CH_AW */ +#define WM831X_CH_AW_SHIFT 0 /* CH_AW */ +#define WM831X_CH_AW_WIDTH 1 /* CH_AW */ + +/* + * R30733 (0x780D) - Factory OTP 5 + */ +#define WM831X_CHARGE_TRIM_MASK 0x003F /* CHARGE_TRIM - [5:0] */ +#define WM831X_CHARGE_TRIM_SHIFT 0 /* CHARGE_TRIM - [5:0] */ +#define WM831X_CHARGE_TRIM_WIDTH 6 /* CHARGE_TRIM - [5:0] */ + +/* + * R30736 (0x7810) - Customer OTP ID + */ +#define WM831X_OTP_AUTO_PROG 0x8000 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_MASK 0x8000 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_SHIFT 15 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_WIDTH 1 /* OTP_AUTO_PROG */ +#define WM831X_OTP_CUST_ID_MASK 0x7FFE /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_ID_SHIFT 1 /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_ID_WIDTH 14 /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_FINAL 0x0001 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_MASK 0x0001 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_SHIFT 0 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_WIDTH 1 /* OTP_CUST_FINAL */ + +/* + * R30759 (0x7827) - DBE CHECK DATA + */ +#define WM831X_DBE_VALID_DATA_MASK 0xFFFF /* DBE_VALID_DATA - [15:0] */ +#define WM831X_DBE_VALID_DATA_SHIFT 0 /* DBE_VALID_DATA - [15:0] */ +#define WM831X_DBE_VALID_DATA_WIDTH 16 /* DBE_VALID_DATA - [15:0] */ + + +#endif diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h new file mode 100644 index 000000000000..90d820260aad --- /dev/null +++ b/include/linux/mfd/wm831x/pdata.h @@ -0,0 +1,113 @@ +/* + * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PDATA_H__ +#define __MFD_WM831X_PDATA_H__ + +struct wm831x; +struct regulator_init_data; + +struct wm831x_backlight_pdata { + int isink; /** ISINK to use, 1 or 2 */ + int max_uA; /** Maximum current to allow */ +}; + +struct wm831x_backup_pdata { + int charger_enable; + int no_constant_voltage; /** Disable constant voltage charging */ + int vlim; /** Voltage limit in milivolts */ + int ilim; /** Current limit in microamps */ +}; + +struct wm831x_battery_pdata { + int enable; /** Enable charging */ + int fast_enable; /** Enable fast charging */ + int off_mask; /** Mask OFF while charging */ + int trickle_ilim; /** Trickle charge current limit, in mA */ + int vsel; /** Target voltage, in mV */ + int eoc_iterm; /** End of trickle charge current, in mA */ + int fast_ilim; /** Fast charge current limit, in mA */ + int timeout; /** Charge cycle timeout, in minutes */ +}; + +/* Sources for status LED configuration. Values are register values + * plus 1 to allow for a zero default for preserve. + */ +enum wm831x_status_src { + WM831X_STATUS_PRESERVE = 0, /* Keep the current hardware setting */ + WM831X_STATUS_OTP = 1, + WM831X_STATUS_POWER = 2, + WM831X_STATUS_CHARGER = 3, + WM831X_STATUS_MANUAL = 4, +}; + +struct wm831x_status_pdata { + enum wm831x_status_src default_src; + const char *name; + const char *default_trigger; +}; + +struct wm831x_touch_pdata { + int fivewire; /** 1 for five wire mode, 0 for 4 wire */ + int isel; /** Current for pen down (uA) */ + int rpu; /** Pen down sensitivity resistor divider */ + int pressure; /** Report pressure (boolean) */ + int data_irq; /** Touch data ready IRQ */ +}; + +enum wm831x_watchdog_action { + WM831X_WDOG_NONE = 0, + WM831X_WDOG_INTERRUPT = 1, + WM831X_WDOG_RESET = 2, + WM831X_WDOG_WAKE = 3, +}; + +struct wm831x_watchdog_pdata { + enum wm831x_watchdog_action primary, secondary; + int update_gpio; + unsigned int software:1; +}; + +#define WM831X_MAX_STATUS 2 +#define WM831X_MAX_DCDC 4 +#define WM831X_MAX_EPE 2 +#define WM831X_MAX_LDO 11 +#define WM831X_MAX_ISINK 2 + +struct wm831x_pdata { + /** Called before subdevices are set up */ + int (*pre_init)(struct wm831x *wm831x); + /** Called after subdevices are set up */ + int (*post_init)(struct wm831x *wm831x); + + int gpio_base; + struct wm831x_backlight_pdata *backlight; + struct wm831x_backup_pdata *backup; + struct wm831x_battery_pdata *battery; + struct wm831x_touch_pdata *touch; + struct wm831x_watchdog_pdata *watchdog; + + /** LED1 = 0 and so on */ + struct wm831x_status_pdata *status[WM831X_MAX_STATUS]; + /** DCDC1 = 0 and so on */ + struct regulator_init_data *dcdc[WM831X_MAX_DCDC]; + /** EPE1 = 0 and so on */ + struct regulator_init_data *epe[WM831X_MAX_EPE]; + /** LDO1 = 0 and so on */ + struct regulator_init_data *ldo[WM831X_MAX_LDO]; + /** ISINK1 = 0 and so on*/ + struct regulator_init_data *isink[WM831X_MAX_ISINK]; +}; + +#endif diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h new file mode 100644 index 000000000000..f95466343fb2 --- /dev/null +++ b/include/linux/mfd/wm831x/regulator.h @@ -0,0 +1,1218 @@ +/* + * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_REGULATOR_H__ +#define __MFD_WM831X_REGULATOR_H__ + +/* + * R16462 (0x404E) - Current Sink 1 + */ +#define WM831X_CS1_ENA 0x8000 /* CS1_ENA */ +#define WM831X_CS1_ENA_MASK 0x8000 /* CS1_ENA */ +#define WM831X_CS1_ENA_SHIFT 15 /* CS1_ENA */ +#define WM831X_CS1_ENA_WIDTH 1 /* CS1_ENA */ +#define WM831X_CS1_DRIVE 0x4000 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_MASK 0x4000 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_SHIFT 14 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_WIDTH 1 /* CS1_DRIVE */ +#define WM831X_CS1_SLPENA 0x1000 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_MASK 0x1000 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_SHIFT 12 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_WIDTH 1 /* CS1_SLPENA */ +#define WM831X_CS1_OFF_RAMP_MASK 0x0C00 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_OFF_RAMP_SHIFT 10 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_OFF_RAMP_WIDTH 2 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_ON_RAMP_MASK 0x0300 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ON_RAMP_SHIFT 8 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ON_RAMP_WIDTH 2 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ISEL_MASK 0x003F /* CS1_ISEL - [5:0] */ +#define WM831X_CS1_ISEL_SHIFT 0 /* CS1_ISEL - [5:0] */ +#define WM831X_CS1_ISEL_WIDTH 6 /* CS1_ISEL - [5:0] */ + +/* + * R16463 (0x404F) - Current Sink 2 + */ +#define WM831X_CS2_ENA 0x8000 /* CS2_ENA */ +#define WM831X_CS2_ENA_MASK 0x8000 /* CS2_ENA */ +#define WM831X_CS2_ENA_SHIFT 15 /* CS2_ENA */ +#define WM831X_CS2_ENA_WIDTH 1 /* CS2_ENA */ +#define WM831X_CS2_DRIVE 0x4000 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_MASK 0x4000 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_SHIFT 14 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_WIDTH 1 /* CS2_DRIVE */ +#define WM831X_CS2_SLPENA 0x1000 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_MASK 0x1000 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_SHIFT 12 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_WIDTH 1 /* CS2_SLPENA */ +#define WM831X_CS2_OFF_RAMP_MASK 0x0C00 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_OFF_RAMP_SHIFT 10 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_OFF_RAMP_WIDTH 2 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_ON_RAMP_MASK 0x0300 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ON_RAMP_SHIFT 8 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ON_RAMP_WIDTH 2 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ISEL_MASK 0x003F /* CS2_ISEL - [5:0] */ +#define WM831X_CS2_ISEL_SHIFT 0 /* CS2_ISEL - [5:0] */ +#define WM831X_CS2_ISEL_WIDTH 6 /* CS2_ISEL - [5:0] */ + +/* + * R16464 (0x4050) - DCDC Enable + */ +#define WM831X_EPE2_ENA 0x0080 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_MASK 0x0080 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_SHIFT 7 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_WIDTH 1 /* EPE2_ENA */ +#define WM831X_EPE1_ENA 0x0040 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_MASK 0x0040 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_SHIFT 6 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_WIDTH 1 /* EPE1_ENA */ +#define WM831X_DC4_ENA 0x0008 /* DC4_ENA */ +#define WM831X_DC4_ENA_MASK 0x0008 /* DC4_ENA */ +#define WM831X_DC4_ENA_SHIFT 3 /* DC4_ENA */ +#define WM831X_DC4_ENA_WIDTH 1 /* DC4_ENA */ +#define WM831X_DC3_ENA 0x0004 /* DC3_ENA */ +#define WM831X_DC3_ENA_MASK 0x0004 /* DC3_ENA */ +#define WM831X_DC3_ENA_SHIFT 2 /* DC3_ENA */ +#define WM831X_DC3_ENA_WIDTH 1 /* DC3_ENA */ +#define WM831X_DC2_ENA 0x0002 /* DC2_ENA */ +#define WM831X_DC2_ENA_MASK 0x0002 /* DC2_ENA */ +#define WM831X_DC2_ENA_SHIFT 1 /* DC2_ENA */ +#define WM831X_DC2_ENA_WIDTH 1 /* DC2_ENA */ +#define WM831X_DC1_ENA 0x0001 /* DC1_ENA */ +#define WM831X_DC1_ENA_MASK 0x0001 /* DC1_ENA */ +#define WM831X_DC1_ENA_SHIFT 0 /* DC1_ENA */ +#define WM831X_DC1_ENA_WIDTH 1 /* DC1_ENA */ + +/* + * R16465 (0x4051) - LDO Enable + */ +#define WM831X_LDO11_ENA 0x0400 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_MASK 0x0400 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_SHIFT 10 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_WIDTH 1 /* LDO11_ENA */ +#define WM831X_LDO10_ENA 0x0200 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_MASK 0x0200 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_SHIFT 9 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_WIDTH 1 /* LDO10_ENA */ +#define WM831X_LDO9_ENA 0x0100 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_MASK 0x0100 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_SHIFT 8 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_WIDTH 1 /* LDO9_ENA */ +#define WM831X_LDO8_ENA 0x0080 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_MASK 0x0080 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_SHIFT 7 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_WIDTH 1 /* LDO8_ENA */ +#define WM831X_LDO7_ENA 0x0040 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_MASK 0x0040 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_SHIFT 6 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_WIDTH 1 /* LDO7_ENA */ +#define WM831X_LDO6_ENA 0x0020 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_MASK 0x0020 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_SHIFT 5 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_WIDTH 1 /* LDO6_ENA */ +#define WM831X_LDO5_ENA 0x0010 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_MASK 0x0010 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_SHIFT 4 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_WIDTH 1 /* LDO5_ENA */ +#define WM831X_LDO4_ENA 0x0008 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_MASK 0x0008 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_SHIFT 3 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_WIDTH 1 /* LDO4_ENA */ +#define WM831X_LDO3_ENA 0x0004 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_MASK 0x0004 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_SHIFT 2 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_WIDTH 1 /* LDO3_ENA */ +#define WM831X_LDO2_ENA 0x0002 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_SHIFT 1 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_WIDTH 1 /* LDO2_ENA */ +#define WM831X_LDO1_ENA 0x0001 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_MASK 0x0001 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_SHIFT 0 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ + +/* + * R16466 (0x4052) - DCDC Status + */ +#define WM831X_EPE2_STS 0x0080 /* EPE2_STS */ +#define WM831X_EPE2_STS_MASK 0x0080 /* EPE2_STS */ +#define WM831X_EPE2_STS_SHIFT 7 /* EPE2_STS */ +#define WM831X_EPE2_STS_WIDTH 1 /* EPE2_STS */ +#define WM831X_EPE1_STS 0x0040 /* EPE1_STS */ +#define WM831X_EPE1_STS_MASK 0x0040 /* EPE1_STS */ +#define WM831X_EPE1_STS_SHIFT 6 /* EPE1_STS */ +#define WM831X_EPE1_STS_WIDTH 1 /* EPE1_STS */ +#define WM831X_DC4_STS 0x0008 /* DC4_STS */ +#define WM831X_DC4_STS_MASK 0x0008 /* DC4_STS */ +#define WM831X_DC4_STS_SHIFT 3 /* DC4_STS */ +#define WM831X_DC4_STS_WIDTH 1 /* DC4_STS */ +#define WM831X_DC3_STS 0x0004 /* DC3_STS */ +#define WM831X_DC3_STS_MASK 0x0004 /* DC3_STS */ +#define WM831X_DC3_STS_SHIFT 2 /* DC3_STS */ +#define WM831X_DC3_STS_WIDTH 1 /* DC3_STS */ +#define WM831X_DC2_STS 0x0002 /* DC2_STS */ +#define WM831X_DC2_STS_MASK 0x0002 /* DC2_STS */ +#define WM831X_DC2_STS_SHIFT 1 /* DC2_STS */ +#define WM831X_DC2_STS_WIDTH 1 /* DC2_STS */ +#define WM831X_DC1_STS 0x0001 /* DC1_STS */ +#define WM831X_DC1_STS_MASK 0x0001 /* DC1_STS */ +#define WM831X_DC1_STS_SHIFT 0 /* DC1_STS */ +#define WM831X_DC1_STS_WIDTH 1 /* DC1_STS */ + +/* + * R16467 (0x4053) - LDO Status + */ +#define WM831X_LDO11_STS 0x0400 /* LDO11_STS */ +#define WM831X_LDO11_STS_MASK 0x0400 /* LDO11_STS */ +#define WM831X_LDO11_STS_SHIFT 10 /* LDO11_STS */ +#define WM831X_LDO11_STS_WIDTH 1 /* LDO11_STS */ +#define WM831X_LDO10_STS 0x0200 /* LDO10_STS */ +#define WM831X_LDO10_STS_MASK 0x0200 /* LDO10_STS */ +#define WM831X_LDO10_STS_SHIFT 9 /* LDO10_STS */ +#define WM831X_LDO10_STS_WIDTH 1 /* LDO10_STS */ +#define WM831X_LDO9_STS 0x0100 /* LDO9_STS */ +#define WM831X_LDO9_STS_MASK 0x0100 /* LDO9_STS */ +#define WM831X_LDO9_STS_SHIFT 8 /* LDO9_STS */ +#define WM831X_LDO9_STS_WIDTH 1 /* LDO9_STS */ +#define WM831X_LDO8_STS 0x0080 /* LDO8_STS */ +#define WM831X_LDO8_STS_MASK 0x0080 /* LDO8_STS */ +#define WM831X_LDO8_STS_SHIFT 7 /* LDO8_STS */ +#define WM831X_LDO8_STS_WIDTH 1 /* LDO8_STS */ +#define WM831X_LDO7_STS 0x0040 /* LDO7_STS */ +#define WM831X_LDO7_STS_MASK 0x0040 /* LDO7_STS */ +#define WM831X_LDO7_STS_SHIFT 6 /* LDO7_STS */ +#define WM831X_LDO7_STS_WIDTH 1 /* LDO7_STS */ +#define WM831X_LDO6_STS 0x0020 /* LDO6_STS */ +#define WM831X_LDO6_STS_MASK 0x0020 /* LDO6_STS */ +#define WM831X_LDO6_STS_SHIFT 5 /* LDO6_STS */ +#define WM831X_LDO6_STS_WIDTH 1 /* LDO6_STS */ +#define WM831X_LDO5_STS 0x0010 /* LDO5_STS */ +#define WM831X_LDO5_STS_MASK 0x0010 /* LDO5_STS */ +#define WM831X_LDO5_STS_SHIFT 4 /* LDO5_STS */ +#define WM831X_LDO5_STS_WIDTH 1 /* LDO5_STS */ +#define WM831X_LDO4_STS 0x0008 /* LDO4_STS */ +#define WM831X_LDO4_STS_MASK 0x0008 /* LDO4_STS */ +#define WM831X_LDO4_STS_SHIFT 3 /* LDO4_STS */ +#define WM831X_LDO4_STS_WIDTH 1 /* LDO4_STS */ +#define WM831X_LDO3_STS 0x0004 /* LDO3_STS */ +#define WM831X_LDO3_STS_MASK 0x0004 /* LDO3_STS */ +#define WM831X_LDO3_STS_SHIFT 2 /* LDO3_STS */ +#define WM831X_LDO3_STS_WIDTH 1 /* LDO3_STS */ +#define WM831X_LDO2_STS 0x0002 /* LDO2_STS */ +#define WM831X_LDO2_STS_MASK 0x0002 /* LDO2_STS */ +#define WM831X_LDO2_STS_SHIFT 1 /* LDO2_STS */ +#define WM831X_LDO2_STS_WIDTH 1 /* LDO2_STS */ +#define WM831X_LDO1_STS 0x0001 /* LDO1_STS */ +#define WM831X_LDO1_STS_MASK 0x0001 /* LDO1_STS */ +#define WM831X_LDO1_STS_SHIFT 0 /* LDO1_STS */ +#define WM831X_LDO1_STS_WIDTH 1 /* LDO1_STS */ + +/* + * R16468 (0x4054) - DCDC UV Status + */ +#define WM831X_DC2_OV_STS 0x2000 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_MASK 0x2000 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_SHIFT 13 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_WIDTH 1 /* DC2_OV_STS */ +#define WM831X_DC1_OV_STS 0x1000 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_MASK 0x1000 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_SHIFT 12 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_WIDTH 1 /* DC1_OV_STS */ +#define WM831X_DC2_HC_STS 0x0200 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_MASK 0x0200 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_SHIFT 9 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_WIDTH 1 /* DC2_HC_STS */ +#define WM831X_DC1_HC_STS 0x0100 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_MASK 0x0100 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_SHIFT 8 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_WIDTH 1 /* DC1_HC_STS */ +#define WM831X_DC4_UV_STS 0x0008 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_MASK 0x0008 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_SHIFT 3 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_WIDTH 1 /* DC4_UV_STS */ +#define WM831X_DC3_UV_STS 0x0004 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_MASK 0x0004 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_SHIFT 2 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_WIDTH 1 /* DC3_UV_STS */ +#define WM831X_DC2_UV_STS 0x0002 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_MASK 0x0002 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_SHIFT 1 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_WIDTH 1 /* DC2_UV_STS */ +#define WM831X_DC1_UV_STS 0x0001 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_MASK 0x0001 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_SHIFT 0 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_WIDTH 1 /* DC1_UV_STS */ + +/* + * R16469 (0x4055) - LDO UV Status + */ +#define WM831X_INTLDO_UV_STS 0x8000 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_MASK 0x8000 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_SHIFT 15 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_WIDTH 1 /* INTLDO_UV_STS */ +#define WM831X_LDO10_UV_STS 0x0200 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_MASK 0x0200 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_SHIFT 9 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_WIDTH 1 /* LDO10_UV_STS */ +#define WM831X_LDO9_UV_STS 0x0100 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_MASK 0x0100 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_SHIFT 8 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_WIDTH 1 /* LDO9_UV_STS */ +#define WM831X_LDO8_UV_STS 0x0080 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_MASK 0x0080 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_SHIFT 7 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_WIDTH 1 /* LDO8_UV_STS */ +#define WM831X_LDO7_UV_STS 0x0040 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_MASK 0x0040 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_SHIFT 6 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_WIDTH 1 /* LDO7_UV_STS */ +#define WM831X_LDO6_UV_STS 0x0020 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_MASK 0x0020 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_SHIFT 5 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_WIDTH 1 /* LDO6_UV_STS */ +#define WM831X_LDO5_UV_STS 0x0010 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_MASK 0x0010 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_SHIFT 4 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_WIDTH 1 /* LDO5_UV_STS */ +#define WM831X_LDO4_UV_STS 0x0008 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_MASK 0x0008 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_SHIFT 3 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_WIDTH 1 /* LDO4_UV_STS */ +#define WM831X_LDO3_UV_STS 0x0004 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_MASK 0x0004 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_SHIFT 2 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_WIDTH 1 /* LDO3_UV_STS */ +#define WM831X_LDO2_UV_STS 0x0002 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_MASK 0x0002 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_SHIFT 1 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_WIDTH 1 /* LDO2_UV_STS */ +#define WM831X_LDO1_UV_STS 0x0001 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_MASK 0x0001 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_SHIFT 0 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_WIDTH 1 /* LDO1_UV_STS */ + +/* + * R16470 (0x4056) - DC1 Control 1 + */ +#define WM831X_DC1_RATE_MASK 0xC000 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_RATE_SHIFT 14 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_RATE_WIDTH 2 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_PHASE 0x1000 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_MASK 0x1000 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_SHIFT 12 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_WIDTH 1 /* DC1_PHASE */ +#define WM831X_DC1_FREQ_MASK 0x0300 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FREQ_SHIFT 8 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FREQ_WIDTH 2 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FLT 0x0080 /* DC1_FLT */ +#define WM831X_DC1_FLT_MASK 0x0080 /* DC1_FLT */ +#define WM831X_DC1_FLT_SHIFT 7 /* DC1_FLT */ +#define WM831X_DC1_FLT_WIDTH 1 /* DC1_FLT */ +#define WM831X_DC1_SOFT_START_MASK 0x0030 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_SOFT_START_SHIFT 4 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_SOFT_START_WIDTH 2 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_CAP_MASK 0x0003 /* DC1_CAP - [1:0] */ +#define WM831X_DC1_CAP_SHIFT 0 /* DC1_CAP - [1:0] */ +#define WM831X_DC1_CAP_WIDTH 2 /* DC1_CAP - [1:0] */ + +/* + * R16471 (0x4057) - DC1 Control 2 + */ +#define WM831X_DC1_ERR_ACT_MASK 0xC000 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_ERR_ACT_SHIFT 14 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_ERR_ACT_WIDTH 2 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_HWC_SRC_MASK 0x1800 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_SRC_SHIFT 11 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_SRC_WIDTH 2 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_VSEL 0x0400 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_MASK 0x0400 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_SHIFT 10 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_WIDTH 1 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_MODE_MASK 0x0300 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HWC_MODE_SHIFT 8 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HWC_MODE_WIDTH 2 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HC_THR_MASK 0x0070 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_THR_SHIFT 4 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_THR_WIDTH 3 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_IND_ENA 0x0001 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_MASK 0x0001 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_SHIFT 0 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_WIDTH 1 /* DC1_HC_IND_ENA */ + +/* + * R16472 (0x4058) - DC1 ON Config + */ +#define WM831X_DC1_ON_SLOT_MASK 0xE000 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_SLOT_SHIFT 13 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_SLOT_WIDTH 3 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_MODE_MASK 0x0300 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_MODE_SHIFT 8 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_MODE_WIDTH 2 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_VSEL_MASK 0x007F /* DC1_ON_VSEL - [6:0] */ +#define WM831X_DC1_ON_VSEL_SHIFT 0 /* DC1_ON_VSEL - [6:0] */ +#define WM831X_DC1_ON_VSEL_WIDTH 7 /* DC1_ON_VSEL - [6:0] */ + +/* + * R16473 (0x4059) - DC1 SLEEP Control + */ +#define WM831X_DC1_SLP_SLOT_MASK 0xE000 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_SLOT_SHIFT 13 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_SLOT_WIDTH 3 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_MODE_MASK 0x0300 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_MODE_SHIFT 8 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_MODE_WIDTH 2 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_VSEL_MASK 0x007F /* DC1_SLP_VSEL - [6:0] */ +#define WM831X_DC1_SLP_VSEL_SHIFT 0 /* DC1_SLP_VSEL - [6:0] */ +#define WM831X_DC1_SLP_VSEL_WIDTH 7 /* DC1_SLP_VSEL - [6:0] */ + +/* + * R16474 (0x405A) - DC1 DVS Control + */ +#define WM831X_DC1_DVS_SRC_MASK 0x1800 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_SRC_SHIFT 11 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_SRC_WIDTH 2 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_VSEL_MASK 0x007F /* DC1_DVS_VSEL - [6:0] */ +#define WM831X_DC1_DVS_VSEL_SHIFT 0 /* DC1_DVS_VSEL - [6:0] */ +#define WM831X_DC1_DVS_VSEL_WIDTH 7 /* DC1_DVS_VSEL - [6:0] */ + +/* + * R16475 (0x405B) - DC2 Control 1 + */ +#define WM831X_DC2_RATE_MASK 0xC000 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_RATE_SHIFT 14 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_RATE_WIDTH 2 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_PHASE 0x1000 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_MASK 0x1000 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_SHIFT 12 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_WIDTH 1 /* DC2_PHASE */ +#define WM831X_DC2_FREQ_MASK 0x0300 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FREQ_SHIFT 8 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FREQ_WIDTH 2 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FLT 0x0080 /* DC2_FLT */ +#define WM831X_DC2_FLT_MASK 0x0080 /* DC2_FLT */ +#define WM831X_DC2_FLT_SHIFT 7 /* DC2_FLT */ +#define WM831X_DC2_FLT_WIDTH 1 /* DC2_FLT */ +#define WM831X_DC2_SOFT_START_MASK 0x0030 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_SOFT_START_SHIFT 4 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_SOFT_START_WIDTH 2 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_CAP_MASK 0x0003 /* DC2_CAP - [1:0] */ +#define WM831X_DC2_CAP_SHIFT 0 /* DC2_CAP - [1:0] */ +#define WM831X_DC2_CAP_WIDTH 2 /* DC2_CAP - [1:0] */ + +/* + * R16476 (0x405C) - DC2 Control 2 + */ +#define WM831X_DC2_ERR_ACT_MASK 0xC000 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_ERR_ACT_SHIFT 14 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_ERR_ACT_WIDTH 2 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_HWC_SRC_MASK 0x1800 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_SRC_SHIFT 11 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_SRC_WIDTH 2 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_VSEL 0x0400 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_MASK 0x0400 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_SHIFT 10 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_WIDTH 1 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_MODE_MASK 0x0300 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HWC_MODE_SHIFT 8 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HWC_MODE_WIDTH 2 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HC_THR_MASK 0x0070 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_THR_SHIFT 4 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_THR_WIDTH 3 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_IND_ENA 0x0001 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_MASK 0x0001 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_SHIFT 0 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_WIDTH 1 /* DC2_HC_IND_ENA */ + +/* + * R16477 (0x405D) - DC2 ON Config + */ +#define WM831X_DC2_ON_SLOT_MASK 0xE000 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_SLOT_SHIFT 13 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_SLOT_WIDTH 3 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_MODE_MASK 0x0300 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_MODE_SHIFT 8 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_MODE_WIDTH 2 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_VSEL_MASK 0x007F /* DC2_ON_VSEL - [6:0] */ +#define WM831X_DC2_ON_VSEL_SHIFT 0 /* DC2_ON_VSEL - [6:0] */ +#define WM831X_DC2_ON_VSEL_WIDTH 7 /* DC2_ON_VSEL - [6:0] */ + +/* + * R16478 (0x405E) - DC2 SLEEP Control + */ +#define WM831X_DC2_SLP_SLOT_MASK 0xE000 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_SLOT_SHIFT 13 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_SLOT_WIDTH 3 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_MODE_MASK 0x0300 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_MODE_SHIFT 8 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_MODE_WIDTH 2 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_VSEL_MASK 0x007F /* DC2_SLP_VSEL - [6:0] */ +#define WM831X_DC2_SLP_VSEL_SHIFT 0 /* DC2_SLP_VSEL - [6:0] */ +#define WM831X_DC2_SLP_VSEL_WIDTH 7 /* DC2_SLP_VSEL - [6:0] */ + +/* + * R16479 (0x405F) - DC2 DVS Control + */ +#define WM831X_DC2_DVS_SRC_MASK 0x1800 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_SRC_SHIFT 11 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_SRC_WIDTH 2 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_VSEL_MASK 0x007F /* DC2_DVS_VSEL - [6:0] */ +#define WM831X_DC2_DVS_VSEL_SHIFT 0 /* DC2_DVS_VSEL - [6:0] */ +#define WM831X_DC2_DVS_VSEL_WIDTH 7 /* DC2_DVS_VSEL - [6:0] */ + +/* + * R16480 (0x4060) - DC3 Control 1 + */ +#define WM831X_DC3_PHASE 0x1000 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_MASK 0x1000 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_SHIFT 12 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_WIDTH 1 /* DC3_PHASE */ +#define WM831X_DC3_FLT 0x0080 /* DC3_FLT */ +#define WM831X_DC3_FLT_MASK 0x0080 /* DC3_FLT */ +#define WM831X_DC3_FLT_SHIFT 7 /* DC3_FLT */ +#define WM831X_DC3_FLT_WIDTH 1 /* DC3_FLT */ +#define WM831X_DC3_SOFT_START_MASK 0x0030 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_SOFT_START_SHIFT 4 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_SOFT_START_WIDTH 2 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_STNBY_LIM_MASK 0x000C /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_STNBY_LIM_SHIFT 2 /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_STNBY_LIM_WIDTH 2 /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_CAP_MASK 0x0003 /* DC3_CAP - [1:0] */ +#define WM831X_DC3_CAP_SHIFT 0 /* DC3_CAP - [1:0] */ +#define WM831X_DC3_CAP_WIDTH 2 /* DC3_CAP - [1:0] */ + +/* + * R16481 (0x4061) - DC3 Control 2 + */ +#define WM831X_DC3_ERR_ACT_MASK 0xC000 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_ERR_ACT_SHIFT 14 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_ERR_ACT_WIDTH 2 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_HWC_SRC_MASK 0x1800 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_SRC_SHIFT 11 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_SRC_WIDTH 2 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_VSEL 0x0400 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_MASK 0x0400 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_SHIFT 10 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_WIDTH 1 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_MODE_MASK 0x0300 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_HWC_MODE_SHIFT 8 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_HWC_MODE_WIDTH 2 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_OVP 0x0080 /* DC3_OVP */ +#define WM831X_DC3_OVP_MASK 0x0080 /* DC3_OVP */ +#define WM831X_DC3_OVP_SHIFT 7 /* DC3_OVP */ +#define WM831X_DC3_OVP_WIDTH 1 /* DC3_OVP */ + +/* + * R16482 (0x4062) - DC3 ON Config + */ +#define WM831X_DC3_ON_SLOT_MASK 0xE000 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_SLOT_SHIFT 13 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_SLOT_WIDTH 3 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_MODE_MASK 0x0300 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_MODE_SHIFT 8 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_MODE_WIDTH 2 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_VSEL_MASK 0x007F /* DC3_ON_VSEL - [6:0] */ +#define WM831X_DC3_ON_VSEL_SHIFT 0 /* DC3_ON_VSEL - [6:0] */ +#define WM831X_DC3_ON_VSEL_WIDTH 7 /* DC3_ON_VSEL - [6:0] */ + +/* + * R16483 (0x4063) - DC3 SLEEP Control + */ +#define WM831X_DC3_SLP_SLOT_MASK 0xE000 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_SLOT_SHIFT 13 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_SLOT_WIDTH 3 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_MODE_MASK 0x0300 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_MODE_SHIFT 8 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_MODE_WIDTH 2 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_VSEL_MASK 0x007F /* DC3_SLP_VSEL - [6:0] */ +#define WM831X_DC3_SLP_VSEL_SHIFT 0 /* DC3_SLP_VSEL - [6:0] */ +#define WM831X_DC3_SLP_VSEL_WIDTH 7 /* DC3_SLP_VSEL - [6:0] */ + +/* + * R16484 (0x4064) - DC4 Control + */ +#define WM831X_DC4_ERR_ACT_MASK 0xC000 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_ERR_ACT_SHIFT 14 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_ERR_ACT_WIDTH 2 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_HWC_SRC_MASK 0x1800 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_SRC_SHIFT 11 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_SRC_WIDTH 2 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_MODE 0x0100 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_MASK 0x0100 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_SHIFT 8 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_WIDTH 1 /* DC4_HWC_MODE */ +#define WM831X_DC4_RANGE_MASK 0x000C /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_RANGE_SHIFT 2 /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_RANGE_WIDTH 2 /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_FBSRC 0x0001 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_MASK 0x0001 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_SHIFT 0 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_WIDTH 1 /* DC4_FBSRC */ + +/* + * R16485 (0x4065) - DC4 SLEEP Control + */ +#define WM831X_DC4_SLPENA 0x0100 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_MASK 0x0100 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_SHIFT 8 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */ + +/* + * R16488 (0x4068) - LDO1 Control + */ +#define WM831X_LDO1_ERR_ACT_MASK 0xC000 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_ERR_ACT_SHIFT 14 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_ERR_ACT_WIDTH 2 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_HWC_SRC_MASK 0x1800 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_SRC_SHIFT 11 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_SRC_WIDTH 2 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_VSEL 0x0400 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_MASK 0x0400 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_SHIFT 10 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_WIDTH 1 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_MODE_MASK 0x0300 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_HWC_MODE_SHIFT 8 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_HWC_MODE_WIDTH 2 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_FLT 0x0080 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_MASK 0x0080 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_SHIFT 7 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_WIDTH 1 /* LDO1_FLT */ +#define WM831X_LDO1_SWI 0x0040 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_MASK 0x0040 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_SHIFT 6 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_WIDTH 1 /* LDO1_SWI */ +#define WM831X_LDO1_LP_MODE 0x0001 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_MASK 0x0001 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_SHIFT 0 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_WIDTH 1 /* LDO1_LP_MODE */ + +/* + * R16489 (0x4069) - LDO1 ON Control + */ +#define WM831X_LDO1_ON_SLOT_MASK 0xE000 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_SLOT_SHIFT 13 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_SLOT_WIDTH 3 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_MODE 0x0100 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_MASK 0x0100 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_SHIFT 8 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_WIDTH 1 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_VSEL_MASK 0x001F /* LDO1_ON_VSEL - [4:0] */ +#define WM831X_LDO1_ON_VSEL_SHIFT 0 /* LDO1_ON_VSEL - [4:0] */ +#define WM831X_LDO1_ON_VSEL_WIDTH 5 /* LDO1_ON_VSEL - [4:0] */ + +/* + * R16490 (0x406A) - LDO1 SLEEP Control + */ +#define WM831X_LDO1_SLP_SLOT_MASK 0xE000 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_SLOT_SHIFT 13 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_SLOT_WIDTH 3 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_MODE 0x0100 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_MASK 0x0100 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_SHIFT 8 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_WIDTH 1 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_VSEL_MASK 0x001F /* LDO1_SLP_VSEL - [4:0] */ +#define WM831X_LDO1_SLP_VSEL_SHIFT 0 /* LDO1_SLP_VSEL - [4:0] */ +#define WM831X_LDO1_SLP_VSEL_WIDTH 5 /* LDO1_SLP_VSEL - [4:0] */ + +/* + * R16491 (0x406B) - LDO2 Control + */ +#define WM831X_LDO2_ERR_ACT_MASK 0xC000 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_ERR_ACT_SHIFT 14 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_ERR_ACT_WIDTH 2 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_HWC_SRC_MASK 0x1800 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_SRC_SHIFT 11 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_SRC_WIDTH 2 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_VSEL 0x0400 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_MASK 0x0400 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_SHIFT 10 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_WIDTH 1 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_MODE_MASK 0x0300 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_HWC_MODE_SHIFT 8 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_HWC_MODE_WIDTH 2 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_FLT 0x0080 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_MASK 0x0080 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_SHIFT 7 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_WIDTH 1 /* LDO2_FLT */ +#define WM831X_LDO2_SWI 0x0040 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_MASK 0x0040 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_SHIFT 6 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_WIDTH 1 /* LDO2_SWI */ +#define WM831X_LDO2_LP_MODE 0x0001 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_MASK 0x0001 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_SHIFT 0 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_WIDTH 1 /* LDO2_LP_MODE */ + +/* + * R16492 (0x406C) - LDO2 ON Control + */ +#define WM831X_LDO2_ON_SLOT_MASK 0xE000 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_SLOT_SHIFT 13 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_SLOT_WIDTH 3 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_MODE 0x0100 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_MASK 0x0100 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_SHIFT 8 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_WIDTH 1 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_VSEL_MASK 0x001F /* LDO2_ON_VSEL - [4:0] */ +#define WM831X_LDO2_ON_VSEL_SHIFT 0 /* LDO2_ON_VSEL - [4:0] */ +#define WM831X_LDO2_ON_VSEL_WIDTH 5 /* LDO2_ON_VSEL - [4:0] */ + +/* + * R16493 (0x406D) - LDO2 SLEEP Control + */ +#define WM831X_LDO2_SLP_SLOT_MASK 0xE000 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_SLOT_SHIFT 13 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_SLOT_WIDTH 3 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_MODE 0x0100 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_MASK 0x0100 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_SHIFT 8 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_WIDTH 1 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_VSEL_MASK 0x001F /* LDO2_SLP_VSEL - [4:0] */ +#define WM831X_LDO2_SLP_VSEL_SHIFT 0 /* LDO2_SLP_VSEL - [4:0] */ +#define WM831X_LDO2_SLP_VSEL_WIDTH 5 /* LDO2_SLP_VSEL - [4:0] */ + +/* + * R16494 (0x406E) - LDO3 Control + */ +#define WM831X_LDO3_ERR_ACT_MASK 0xC000 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_ERR_ACT_SHIFT 14 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_ERR_ACT_WIDTH 2 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_HWC_SRC_MASK 0x1800 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_SRC_SHIFT 11 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_SRC_WIDTH 2 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_VSEL 0x0400 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_MASK 0x0400 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_SHIFT 10 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_WIDTH 1 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_MODE_MASK 0x0300 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_HWC_MODE_SHIFT 8 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_HWC_MODE_WIDTH 2 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_FLT 0x0080 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_MASK 0x0080 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_SHIFT 7 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_WIDTH 1 /* LDO3_FLT */ +#define WM831X_LDO3_SWI 0x0040 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_MASK 0x0040 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_SHIFT 6 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_WIDTH 1 /* LDO3_SWI */ +#define WM831X_LDO3_LP_MODE 0x0001 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_MASK 0x0001 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_SHIFT 0 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_WIDTH 1 /* LDO3_LP_MODE */ + +/* + * R16495 (0x406F) - LDO3 ON Control + */ +#define WM831X_LDO3_ON_SLOT_MASK 0xE000 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_SLOT_SHIFT 13 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_SLOT_WIDTH 3 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_MODE 0x0100 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_MASK 0x0100 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_SHIFT 8 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_WIDTH 1 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_VSEL_MASK 0x001F /* LDO3_ON_VSEL - [4:0] */ +#define WM831X_LDO3_ON_VSEL_SHIFT 0 /* LDO3_ON_VSEL - [4:0] */ +#define WM831X_LDO3_ON_VSEL_WIDTH 5 /* LDO3_ON_VSEL - [4:0] */ + +/* + * R16496 (0x4070) - LDO3 SLEEP Control + */ +#define WM831X_LDO3_SLP_SLOT_MASK 0xE000 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_SLOT_SHIFT 13 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_SLOT_WIDTH 3 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_MODE 0x0100 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_MASK 0x0100 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_SHIFT 8 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_WIDTH 1 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_VSEL_MASK 0x001F /* LDO3_SLP_VSEL - [4:0] */ +#define WM831X_LDO3_SLP_VSEL_SHIFT 0 /* LDO3_SLP_VSEL - [4:0] */ +#define WM831X_LDO3_SLP_VSEL_WIDTH 5 /* LDO3_SLP_VSEL - [4:0] */ + +/* + * R16497 (0x4071) - LDO4 Control + */ +#define WM831X_LDO4_ERR_ACT_MASK 0xC000 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_ERR_ACT_SHIFT 14 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_ERR_ACT_WIDTH 2 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_HWC_SRC_MASK 0x1800 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_SRC_SHIFT 11 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_SRC_WIDTH 2 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_VSEL 0x0400 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_MASK 0x0400 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_SHIFT 10 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_WIDTH 1 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_MODE_MASK 0x0300 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_HWC_MODE_SHIFT 8 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_HWC_MODE_WIDTH 2 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_FLT 0x0080 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_MASK 0x0080 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_SHIFT 7 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_WIDTH 1 /* LDO4_FLT */ +#define WM831X_LDO4_SWI 0x0040 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_MASK 0x0040 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_SHIFT 6 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_WIDTH 1 /* LDO4_SWI */ +#define WM831X_LDO4_LP_MODE 0x0001 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_MASK 0x0001 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_SHIFT 0 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_WIDTH 1 /* LDO4_LP_MODE */ + +/* + * R16498 (0x4072) - LDO4 ON Control + */ +#define WM831X_LDO4_ON_SLOT_MASK 0xE000 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_SLOT_SHIFT 13 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_SLOT_WIDTH 3 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_MODE 0x0100 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_MASK 0x0100 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_SHIFT 8 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_WIDTH 1 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_VSEL_MASK 0x001F /* LDO4_ON_VSEL - [4:0] */ +#define WM831X_LDO4_ON_VSEL_SHIFT 0 /* LDO4_ON_VSEL - [4:0] */ +#define WM831X_LDO4_ON_VSEL_WIDTH 5 /* LDO4_ON_VSEL - [4:0] */ + +/* + * R16499 (0x4073) - LDO4 SLEEP Control + */ +#define WM831X_LDO4_SLP_SLOT_MASK 0xE000 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_SLOT_SHIFT 13 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_SLOT_WIDTH 3 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_MODE 0x0100 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_MASK 0x0100 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_SHIFT 8 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_WIDTH 1 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_VSEL_MASK 0x001F /* LDO4_SLP_VSEL - [4:0] */ +#define WM831X_LDO4_SLP_VSEL_SHIFT 0 /* LDO4_SLP_VSEL - [4:0] */ +#define WM831X_LDO4_SLP_VSEL_WIDTH 5 /* LDO4_SLP_VSEL - [4:0] */ + +/* + * R16500 (0x4074) - LDO5 Control + */ +#define WM831X_LDO5_ERR_ACT_MASK 0xC000 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_ERR_ACT_SHIFT 14 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_ERR_ACT_WIDTH 2 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_HWC_SRC_MASK 0x1800 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_SRC_SHIFT 11 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_SRC_WIDTH 2 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_VSEL 0x0400 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_MASK 0x0400 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_SHIFT 10 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_WIDTH 1 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_MODE_MASK 0x0300 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_HWC_MODE_SHIFT 8 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_HWC_MODE_WIDTH 2 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_FLT 0x0080 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_MASK 0x0080 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_SHIFT 7 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_WIDTH 1 /* LDO5_FLT */ +#define WM831X_LDO5_SWI 0x0040 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_MASK 0x0040 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_SHIFT 6 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_WIDTH 1 /* LDO5_SWI */ +#define WM831X_LDO5_LP_MODE 0x0001 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_MASK 0x0001 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_SHIFT 0 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_WIDTH 1 /* LDO5_LP_MODE */ + +/* + * R16501 (0x4075) - LDO5 ON Control + */ +#define WM831X_LDO5_ON_SLOT_MASK 0xE000 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_SLOT_SHIFT 13 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_SLOT_WIDTH 3 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_MODE 0x0100 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_MASK 0x0100 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_SHIFT 8 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_WIDTH 1 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_VSEL_MASK 0x001F /* LDO5_ON_VSEL - [4:0] */ +#define WM831X_LDO5_ON_VSEL_SHIFT 0 /* LDO5_ON_VSEL - [4:0] */ +#define WM831X_LDO5_ON_VSEL_WIDTH 5 /* LDO5_ON_VSEL - [4:0] */ + +/* + * R16502 (0x4076) - LDO5 SLEEP Control + */ +#define WM831X_LDO5_SLP_SLOT_MASK 0xE000 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_SLOT_SHIFT 13 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_SLOT_WIDTH 3 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_MODE 0x0100 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_MASK 0x0100 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_SHIFT 8 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_WIDTH 1 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_VSEL_MASK 0x001F /* LDO5_SLP_VSEL - [4:0] */ +#define WM831X_LDO5_SLP_VSEL_SHIFT 0 /* LDO5_SLP_VSEL - [4:0] */ +#define WM831X_LDO5_SLP_VSEL_WIDTH 5 /* LDO5_SLP_VSEL - [4:0] */ + +/* + * R16503 (0x4077) - LDO6 Control + */ +#define WM831X_LDO6_ERR_ACT_MASK 0xC000 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_ERR_ACT_SHIFT 14 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_ERR_ACT_WIDTH 2 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_HWC_SRC_MASK 0x1800 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_SRC_SHIFT 11 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_SRC_WIDTH 2 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_VSEL 0x0400 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_MASK 0x0400 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_SHIFT 10 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_WIDTH 1 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_MODE_MASK 0x0300 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_HWC_MODE_SHIFT 8 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_HWC_MODE_WIDTH 2 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_FLT 0x0080 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_MASK 0x0080 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_SHIFT 7 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_WIDTH 1 /* LDO6_FLT */ +#define WM831X_LDO6_SWI 0x0040 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_MASK 0x0040 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_SHIFT 6 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_WIDTH 1 /* LDO6_SWI */ +#define WM831X_LDO6_LP_MODE 0x0001 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_MASK 0x0001 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_SHIFT 0 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_WIDTH 1 /* LDO6_LP_MODE */ + +/* + * R16504 (0x4078) - LDO6 ON Control + */ +#define WM831X_LDO6_ON_SLOT_MASK 0xE000 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_SLOT_SHIFT 13 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_SLOT_WIDTH 3 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_MODE 0x0100 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_MASK 0x0100 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_SHIFT 8 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_WIDTH 1 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_VSEL_MASK 0x001F /* LDO6_ON_VSEL - [4:0] */ +#define WM831X_LDO6_ON_VSEL_SHIFT 0 /* LDO6_ON_VSEL - [4:0] */ +#define WM831X_LDO6_ON_VSEL_WIDTH 5 /* LDO6_ON_VSEL - [4:0] */ + +/* + * R16505 (0x4079) - LDO6 SLEEP Control + */ +#define WM831X_LDO6_SLP_SLOT_MASK 0xE000 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_SLOT_SHIFT 13 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_SLOT_WIDTH 3 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_MODE 0x0100 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_MASK 0x0100 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_SHIFT 8 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_WIDTH 1 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_VSEL_MASK 0x001F /* LDO6_SLP_VSEL - [4:0] */ +#define WM831X_LDO6_SLP_VSEL_SHIFT 0 /* LDO6_SLP_VSEL - [4:0] */ +#define WM831X_LDO6_SLP_VSEL_WIDTH 5 /* LDO6_SLP_VSEL - [4:0] */ + +/* + * R16506 (0x407A) - LDO7 Control + */ +#define WM831X_LDO7_ERR_ACT_MASK 0xC000 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_ERR_ACT_SHIFT 14 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_ERR_ACT_WIDTH 2 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_HWC_SRC_MASK 0x1800 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_SRC_SHIFT 11 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_SRC_WIDTH 2 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_VSEL 0x0400 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_MASK 0x0400 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_SHIFT 10 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_WIDTH 1 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_MODE_MASK 0x0300 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_HWC_MODE_SHIFT 8 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_HWC_MODE_WIDTH 2 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_FLT 0x0080 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_MASK 0x0080 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_SHIFT 7 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_WIDTH 1 /* LDO7_FLT */ +#define WM831X_LDO7_SWI 0x0040 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_MASK 0x0040 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_SHIFT 6 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_WIDTH 1 /* LDO7_SWI */ + +/* + * R16507 (0x407B) - LDO7 ON Control + */ +#define WM831X_LDO7_ON_SLOT_MASK 0xE000 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_SLOT_SHIFT 13 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_SLOT_WIDTH 3 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_MODE 0x0100 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_MASK 0x0100 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_SHIFT 8 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_WIDTH 1 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_VSEL_MASK 0x001F /* LDO7_ON_VSEL - [4:0] */ +#define WM831X_LDO7_ON_VSEL_SHIFT 0 /* LDO7_ON_VSEL - [4:0] */ +#define WM831X_LDO7_ON_VSEL_WIDTH 5 /* LDO7_ON_VSEL - [4:0] */ + +/* + * R16508 (0x407C) - LDO7 SLEEP Control + */ +#define WM831X_LDO7_SLP_SLOT_MASK 0xE000 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_SLOT_SHIFT 13 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_SLOT_WIDTH 3 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_MODE 0x0100 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_MASK 0x0100 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_SHIFT 8 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_WIDTH 1 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_VSEL_MASK 0x001F /* LDO7_SLP_VSEL - [4:0] */ +#define WM831X_LDO7_SLP_VSEL_SHIFT 0 /* LDO7_SLP_VSEL - [4:0] */ +#define WM831X_LDO7_SLP_VSEL_WIDTH 5 /* LDO7_SLP_VSEL - [4:0] */ + +/* + * R16509 (0x407D) - LDO8 Control + */ +#define WM831X_LDO8_ERR_ACT_MASK 0xC000 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_ERR_ACT_SHIFT 14 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_ERR_ACT_WIDTH 2 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_HWC_SRC_MASK 0x1800 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_SRC_SHIFT 11 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_SRC_WIDTH 2 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_VSEL 0x0400 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_MASK 0x0400 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_SHIFT 10 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_WIDTH 1 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_MODE_MASK 0x0300 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_HWC_MODE_SHIFT 8 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_HWC_MODE_WIDTH 2 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_FLT 0x0080 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_MASK 0x0080 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_SHIFT 7 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_WIDTH 1 /* LDO8_FLT */ +#define WM831X_LDO8_SWI 0x0040 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_MASK 0x0040 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_SHIFT 6 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_WIDTH 1 /* LDO8_SWI */ + +/* + * R16510 (0x407E) - LDO8 ON Control + */ +#define WM831X_LDO8_ON_SLOT_MASK 0xE000 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_SLOT_SHIFT 13 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_SLOT_WIDTH 3 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_MODE 0x0100 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_MASK 0x0100 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_SHIFT 8 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_WIDTH 1 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_VSEL_MASK 0x001F /* LDO8_ON_VSEL - [4:0] */ +#define WM831X_LDO8_ON_VSEL_SHIFT 0 /* LDO8_ON_VSEL - [4:0] */ +#define WM831X_LDO8_ON_VSEL_WIDTH 5 /* LDO8_ON_VSEL - [4:0] */ + +/* + * R16511 (0x407F) - LDO8 SLEEP Control + */ +#define WM831X_LDO8_SLP_SLOT_MASK 0xE000 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_SLOT_SHIFT 13 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_SLOT_WIDTH 3 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_MODE 0x0100 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_MASK 0x0100 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_SHIFT 8 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_WIDTH 1 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_VSEL_MASK 0x001F /* LDO8_SLP_VSEL - [4:0] */ +#define WM831X_LDO8_SLP_VSEL_SHIFT 0 /* LDO8_SLP_VSEL - [4:0] */ +#define WM831X_LDO8_SLP_VSEL_WIDTH 5 /* LDO8_SLP_VSEL - [4:0] */ + +/* + * R16512 (0x4080) - LDO9 Control + */ +#define WM831X_LDO9_ERR_ACT_MASK 0xC000 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_ERR_ACT_SHIFT 14 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_ERR_ACT_WIDTH 2 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_HWC_SRC_MASK 0x1800 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_SRC_SHIFT 11 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_SRC_WIDTH 2 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_VSEL 0x0400 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_MASK 0x0400 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_SHIFT 10 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_WIDTH 1 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_MODE_MASK 0x0300 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_HWC_MODE_SHIFT 8 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_HWC_MODE_WIDTH 2 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_FLT 0x0080 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_MASK 0x0080 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_SHIFT 7 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_WIDTH 1 /* LDO9_FLT */ +#define WM831X_LDO9_SWI 0x0040 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_MASK 0x0040 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_SHIFT 6 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_WIDTH 1 /* LDO9_SWI */ + +/* + * R16513 (0x4081) - LDO9 ON Control + */ +#define WM831X_LDO9_ON_SLOT_MASK 0xE000 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_SLOT_SHIFT 13 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_SLOT_WIDTH 3 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_MODE 0x0100 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_MASK 0x0100 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_SHIFT 8 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_WIDTH 1 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_VSEL_MASK 0x001F /* LDO9_ON_VSEL - [4:0] */ +#define WM831X_LDO9_ON_VSEL_SHIFT 0 /* LDO9_ON_VSEL - [4:0] */ +#define WM831X_LDO9_ON_VSEL_WIDTH 5 /* LDO9_ON_VSEL - [4:0] */ + +/* + * R16514 (0x4082) - LDO9 SLEEP Control + */ +#define WM831X_LDO9_SLP_SLOT_MASK 0xE000 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_SLOT_SHIFT 13 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_SLOT_WIDTH 3 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_MODE 0x0100 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_MASK 0x0100 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_SHIFT 8 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_WIDTH 1 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_VSEL_MASK 0x001F /* LDO9_SLP_VSEL - [4:0] */ +#define WM831X_LDO9_SLP_VSEL_SHIFT 0 /* LDO9_SLP_VSEL - [4:0] */ +#define WM831X_LDO9_SLP_VSEL_WIDTH 5 /* LDO9_SLP_VSEL - [4:0] */ + +/* + * R16515 (0x4083) - LDO10 Control + */ +#define WM831X_LDO10_ERR_ACT_MASK 0xC000 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_ERR_ACT_SHIFT 14 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_ERR_ACT_WIDTH 2 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_HWC_SRC_MASK 0x1800 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_SRC_SHIFT 11 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_SRC_WIDTH 2 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_VSEL 0x0400 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_MASK 0x0400 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_SHIFT 10 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_WIDTH 1 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_MODE_MASK 0x0300 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_HWC_MODE_SHIFT 8 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_HWC_MODE_WIDTH 2 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_FLT 0x0080 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_MASK 0x0080 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_SHIFT 7 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_WIDTH 1 /* LDO10_FLT */ +#define WM831X_LDO10_SWI 0x0040 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_MASK 0x0040 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_SHIFT 6 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_WIDTH 1 /* LDO10_SWI */ + +/* + * R16516 (0x4084) - LDO10 ON Control + */ +#define WM831X_LDO10_ON_SLOT_MASK 0xE000 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_SLOT_SHIFT 13 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_SLOT_WIDTH 3 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_MODE 0x0100 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_MASK 0x0100 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_SHIFT 8 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_WIDTH 1 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_VSEL_MASK 0x001F /* LDO10_ON_VSEL - [4:0] */ +#define WM831X_LDO10_ON_VSEL_SHIFT 0 /* LDO10_ON_VSEL - [4:0] */ +#define WM831X_LDO10_ON_VSEL_WIDTH 5 /* LDO10_ON_VSEL - [4:0] */ + +/* + * R16517 (0x4085) - LDO10 SLEEP Control + */ +#define WM831X_LDO10_SLP_SLOT_MASK 0xE000 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_SLOT_SHIFT 13 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_SLOT_WIDTH 3 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_MODE 0x0100 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_MASK 0x0100 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_SHIFT 8 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_WIDTH 1 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_VSEL_MASK 0x001F /* LDO10_SLP_VSEL - [4:0] */ +#define WM831X_LDO10_SLP_VSEL_SHIFT 0 /* LDO10_SLP_VSEL - [4:0] */ +#define WM831X_LDO10_SLP_VSEL_WIDTH 5 /* LDO10_SLP_VSEL - [4:0] */ + +/* + * R16519 (0x4087) - LDO11 ON Control + */ +#define WM831X_LDO11_ON_SLOT_MASK 0xE000 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_ON_SLOT_SHIFT 13 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_ON_SLOT_WIDTH 3 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_OFFENA 0x1000 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_MASK 0x1000 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_SHIFT 12 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_WIDTH 1 /* LDO11_OFFENA */ +#define WM831X_LDO11_VSEL_SRC 0x0080 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_MASK 0x0080 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_SHIFT 7 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_WIDTH 1 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_ON_VSEL_MASK 0x000F /* LDO11_ON_VSEL - [3:0] */ +#define WM831X_LDO11_ON_VSEL_SHIFT 0 /* LDO11_ON_VSEL - [3:0] */ +#define WM831X_LDO11_ON_VSEL_WIDTH 4 /* LDO11_ON_VSEL - [3:0] */ + +/* + * R16520 (0x4088) - LDO11 SLEEP Control + */ +#define WM831X_LDO11_SLP_SLOT_MASK 0xE000 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_SLOT_SHIFT 13 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_SLOT_WIDTH 3 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_VSEL_MASK 0x000F /* LDO11_SLP_VSEL - [3:0] */ +#define WM831X_LDO11_SLP_VSEL_SHIFT 0 /* LDO11_SLP_VSEL - [3:0] */ +#define WM831X_LDO11_SLP_VSEL_WIDTH 4 /* LDO11_SLP_VSEL - [3:0] */ + +/* + * R16526 (0x408E) - Power Good Source 1 + */ +#define WM831X_DC4_OK 0x0008 /* DC4_OK */ +#define WM831X_DC4_OK_MASK 0x0008 /* DC4_OK */ +#define WM831X_DC4_OK_SHIFT 3 /* DC4_OK */ +#define WM831X_DC4_OK_WIDTH 1 /* DC4_OK */ +#define WM831X_DC3_OK 0x0004 /* DC3_OK */ +#define WM831X_DC3_OK_MASK 0x0004 /* DC3_OK */ +#define WM831X_DC3_OK_SHIFT 2 /* DC3_OK */ +#define WM831X_DC3_OK_WIDTH 1 /* DC3_OK */ +#define WM831X_DC2_OK 0x0002 /* DC2_OK */ +#define WM831X_DC2_OK_MASK 0x0002 /* DC2_OK */ +#define WM831X_DC2_OK_SHIFT 1 /* DC2_OK */ +#define WM831X_DC2_OK_WIDTH 1 /* DC2_OK */ +#define WM831X_DC1_OK 0x0001 /* DC1_OK */ +#define WM831X_DC1_OK_MASK 0x0001 /* DC1_OK */ +#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */ +#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */ + +/* + * R16527 (0x408F) - Power Good Source 2 + */ +#define WM831X_LDO10_OK 0x0200 /* LDO10_OK */ +#define WM831X_LDO10_OK_MASK 0x0200 /* LDO10_OK */ +#define WM831X_LDO10_OK_SHIFT 9 /* LDO10_OK */ +#define WM831X_LDO10_OK_WIDTH 1 /* LDO10_OK */ +#define WM831X_LDO9_OK 0x0100 /* LDO9_OK */ +#define WM831X_LDO9_OK_MASK 0x0100 /* LDO9_OK */ +#define WM831X_LDO9_OK_SHIFT 8 /* LDO9_OK */ +#define WM831X_LDO9_OK_WIDTH 1 /* LDO9_OK */ +#define WM831X_LDO8_OK 0x0080 /* LDO8_OK */ +#define WM831X_LDO8_OK_MASK 0x0080 /* LDO8_OK */ +#define WM831X_LDO8_OK_SHIFT 7 /* LDO8_OK */ +#define WM831X_LDO8_OK_WIDTH 1 /* LDO8_OK */ +#define WM831X_LDO7_OK 0x0040 /* LDO7_OK */ +#define WM831X_LDO7_OK_MASK 0x0040 /* LDO7_OK */ +#define WM831X_LDO7_OK_SHIFT 6 /* LDO7_OK */ +#define WM831X_LDO7_OK_WIDTH 1 /* LDO7_OK */ +#define WM831X_LDO6_OK 0x0020 /* LDO6_OK */ +#define WM831X_LDO6_OK_MASK 0x0020 /* LDO6_OK */ +#define WM831X_LDO6_OK_SHIFT 5 /* LDO6_OK */ +#define WM831X_LDO6_OK_WIDTH 1 /* LDO6_OK */ +#define WM831X_LDO5_OK 0x0010 /* LDO5_OK */ +#define WM831X_LDO5_OK_MASK 0x0010 /* LDO5_OK */ +#define WM831X_LDO5_OK_SHIFT 4 /* LDO5_OK */ +#define WM831X_LDO5_OK_WIDTH 1 /* LDO5_OK */ +#define WM831X_LDO4_OK 0x0008 /* LDO4_OK */ +#define WM831X_LDO4_OK_MASK 0x0008 /* LDO4_OK */ +#define WM831X_LDO4_OK_SHIFT 3 /* LDO4_OK */ +#define WM831X_LDO4_OK_WIDTH 1 /* LDO4_OK */ +#define WM831X_LDO3_OK 0x0004 /* LDO3_OK */ +#define WM831X_LDO3_OK_MASK 0x0004 /* LDO3_OK */ +#define WM831X_LDO3_OK_SHIFT 2 /* LDO3_OK */ +#define WM831X_LDO3_OK_WIDTH 1 /* LDO3_OK */ +#define WM831X_LDO2_OK 0x0002 /* LDO2_OK */ +#define WM831X_LDO2_OK_MASK 0x0002 /* LDO2_OK */ +#define WM831X_LDO2_OK_SHIFT 1 /* LDO2_OK */ +#define WM831X_LDO2_OK_WIDTH 1 /* LDO2_OK */ +#define WM831X_LDO1_OK 0x0001 /* LDO1_OK */ +#define WM831X_LDO1_OK_MASK 0x0001 /* LDO1_OK */ +#define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */ +#define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */ + +#define WM831X_ISINK_MAX_ISEL 56 +extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; + +#endif diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 42cca672f340..1d595de6a055 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -605,6 +605,11 @@ struct wm8350_irq { void *data; }; +struct wm8350_hwmon { + struct platform_device *pdev; + struct device *classdev; +}; + struct wm8350 { struct device *dev; @@ -621,7 +626,6 @@ struct wm8350 { struct mutex auxadc_mutex; /* Interrupt handling */ - struct work_struct irq_work; struct mutex irq_mutex; /* IRQ table mutex */ struct wm8350_irq irq[WM8350_NUM_IRQ]; int chip_irq; @@ -629,6 +633,7 @@ struct wm8350 { /* Client devices */ struct wm8350_codec codec; struct wm8350_gpio gpio; + struct wm8350_hwmon hwmon; struct wm8350_pmic pmic; struct wm8350_power power; struct wm8350_rtc rtc; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 225f733e7533..ce1be708ca16 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -193,6 +193,8 @@ void *rdev_get_drvdata(struct regulator_dev *rdev); struct device *rdev_get_dev(struct regulator_dev *rdev); int rdev_get_id(struct regulator_dev *rdev); +int regulator_mode_to_status(unsigned int); + void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif |
