diff options
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/Overview.txt | 7 | ||||
| -rw-r--r-- | arch/arm/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2400/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2400/Makefile | 15 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2400/gpio.c | 42 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2400/include/mach/map.h | 66 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 241 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/regs-mem.h | 28 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2412/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/cpu.c | 15 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/regs-iis.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/regs-spi.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/include/plat/s3c2400.h | 31 | ||||
| -rw-r--r-- | drivers/tty/serial/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/tty/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/s3c2400.c | 105 |
18 files changed, 7 insertions, 580 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index c12bfc1a00c9..359587b2367b 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -8,10 +8,13 @@ Introduction The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, - S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices + S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices are supported. - Support for the S3C2400 and S3C24A0 series are in progress. + Support for the S3C2400 and S3C24A0 series was never completed and the + corresponding code has been removed after a while. If someone wishes to + revive this effort, partial support can be retrieved from earlier Linux + versions. The S3C2416 and S3C2450 devices are very similar and S3C2450 support is included under the arch/arm/mach-s3c2416 directory. Note, whilst core diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..17938199dc32 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -969,7 +969,6 @@ source "arch/arm/plat-spear/Kconfig" source "arch/arm/plat-tcc/Kconfig" if ARCH_S3C2410 -source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2416/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64d2591e882f..2d856b2908af 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -172,7 +172,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig deleted file mode 100644 index fdd8f5e96faf..000000000000 --- a/arch/arm/mach-s3c2400/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -menu "S3C2400 Machines" - -endmenu diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile deleted file mode 100644 index 7e23f4e13766..000000000000 --- a/arch/arm/mach-s3c2400/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# arch/arm/mach-s3c2400/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2400) += gpio.o - -# Machine support - diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c deleted file mode 100644 index 6c68e78f3595..000000000000 --- a/arch/arm/mach-s3c2400/gpio.c +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c2400/gpio.c - * - * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> - * - * S3C2400 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2400_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7)) - return -EINVAL; /* not valid interrupts */ - - return (pin - S3C2410_GPE(0)) + IRQ_EINT0; -} - -EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h deleted file mode 100644 index 3fd889200e99..000000000000 --- a/arch/arm/mach-s3c2400/include/mach/map.h +++ /dev/null @@ -1,66 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/map.h - * - * Copyright 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright 2003, Lucas Correia Villa Real - * - * S3C2400 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C2400_PA_MEMCTRL (0x14000000) -#define S3C2400_PA_USBHOST (0x14200000) -#define S3C2400_PA_IRQ (0x14400000) -#define S3C2400_PA_DMA (0x14600000) -#define S3C2400_PA_CLKPWR (0x14800000) -#define S3C2400_PA_LCD (0x14A00000) -#define S3C2400_PA_UART (0x15000000) -#define S3C2400_PA_TIMER (0x15100000) -#define S3C2400_PA_USBDEV (0x15200140) -#define S3C2400_PA_WATCHDOG (0x15300000) -#define S3C2400_PA_IIC (0x15400000) -#define S3C2400_PA_IIS (0x15508000) -#define S3C2400_PA_GPIO (0x15600000) -#define S3C2400_PA_RTC (0x15700040) -#define S3C2400_PA_ADC (0x15800000) -#define S3C2400_PA_SPI (0x15900000) - -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - -/* physical addresses of all the chip-select areas */ - -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index f453c4f2cb8e..bab139201761 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - /* s3c2410_gpio_irqfilter * * set the irq filtering on the given pin diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index a0a89d429296..cac1ad6b582c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -16,11 +16,7 @@ #include <mach/gpio-nrs.h> -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_MISCCR S3C2400_MISCCR -#else #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ /* general configuration options */ @@ -42,67 +38,33 @@ /* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output * 1 makes port special function, this is default */ #define S3C2410_GPACON S3C2410_GPIOREG(0x00) #define S3C2410_GPADAT S3C2410_GPIOREG(0x04) -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - #define S3C2410_GPA0_ADDR0 (1<<0) - #define S3C2410_GPA1_ADDR16 (1<<1) - #define S3C2410_GPA2_ADDR17 (1<<2) - #define S3C2410_GPA3_ADDR18 (1<<3) - #define S3C2410_GPA4_ADDR19 (1<<4) - #define S3C2410_GPA5_ADDR20 (1<<5) - #define S3C2410_GPA6_ADDR21 (1<<6) - #define S3C2410_GPA7_ADDR22 (1<<7) - #define S3C2410_GPA8_ADDR23 (1<<8) - #define S3C2410_GPA9_ADDR24 (1<<9) - #define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - #define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - #define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - #define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - #define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - #define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - #define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - #define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - #define S3C2410_GPA18_ALE (1<<18) - #define S3C2410_GPA19_nFWE (1<<19) - #define S3C2410_GPA20_nFRE (1<<20) - #define S3C2410_GPA21_nRSTOUT (1<<21) - #define S3C2410_GPA22_nFCE (1<<22) /* 0x08 and 0x0c are reserved on S3C2410 */ @@ -111,10 +73,6 @@ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. * 00 = input, 01 = output, 10=special function, 11=reserved - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - * bit 0,1 = pin 0, 2,3= pin 1... * * CPBUP = pull up resistor control, 1=disabled, 0=enabled @@ -124,78 +82,35 @@ #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) #define S3C2410_GPBUP S3C2410_GPIOREG(0x18) -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ #define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) #define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) #define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) #define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) #define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) #define S3C2410_GPB5_nXBACK (0x02 << 10) #define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) #define S3C2410_GPB6_nXBREQ (0x02 << 12) #define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) #define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) #define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) #define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) #define S3C2410_GPB_PUPDIS(x) (1<<(x)) @@ -208,59 +123,22 @@ #define S3C2410_GPCCON S3C2410_GPIOREG(0x20) #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) #define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - #define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - #define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - #define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - #define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - #define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - #define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - #define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - #define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - #define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - #define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - #define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - #define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - #define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - #define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - #define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - #define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - #define S3C2410_GPC_PUPDIS(x) (1<<(x)) /* @@ -269,8 +147,6 @@ * almost identical setup to port b, but the special functions are mostly * to do with the video system's data. * - * S3C2400: Port D consists of 11 GPIO/Special function - * * almost identical setup to port c */ @@ -278,46 +154,31 @@ #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) #define S3C2410_GPDUP S3C2410_GPIOREG(0x38) -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - #define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) #define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) #define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) #define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) #define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) #define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) #define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) #define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) #define S3C2440_GPD8_SPIMISO1 (0x03 << 16) #define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) #define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) #define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) #define S3C2440_GPD10_SPICLK1 (0x03 << 20) #define S3C2410_GPD11_VD19 (0x02 << 22) @@ -340,9 +201,6 @@ * again, the same as port B, but dealing with I2S, SDI, and * more miscellaneous functions * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * * GPIO / interrupt inputs */ @@ -350,74 +208,51 @@ #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) #define S3C2410_GPEUP S3C2410_GPIOREG(0x48) -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - #define S3C2410_GPE0_I2SLRCK (0x02 << 0) #define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) #define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) #define S3C2410_GPE2_CDCLK (0x02 << 4) #define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) #define S3C2410_GPE3_I2SSDI (0x02 << 6) #define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) #define S3C2410_GPE4_I2SSDO (0x02 << 8) #define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) #define S3C2410_GPE5_SDCLK (0x02 << 10) #define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) #define S3C2443_GPE5_AC_BITCLK (0x03 << 10) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) #define S3C2443_GPE6_AC_SDI (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) #define S3C2443_GPE7_AC_SDO (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) #define S3C2443_GPE8_AC_SYNC (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) #define S3C2443_GPE9_AC_nRESET (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) @@ -447,9 +282,6 @@ * * pull up works like all other ports. * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * * GPIO/serial/misc pins */ @@ -457,37 +289,14 @@ #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) #define S3C2410_GPFUP S3C2410_GPIOREG(0x58) -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - #define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - #define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - #define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - #define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - #define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - #define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - #define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - #define S3C2410_GPF7_EINT7 (0x02 << 14) - #define S3C2410_GPF_PUPDIS(x) (1<<(x)) /* S3C2410: @@ -497,62 +306,38 @@ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function */ #define S3C2410_GPGCON S3C2410_GPIOREG(0x60) #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) #define S3C2410_GPGUP S3C2410_GPIOREG(0x68) -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - #define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) #define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) #define S3C2410_GPG2_EINT10 (0x02 << 4) #define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3_EINT11 (0x02 << 6) #define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) #define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2443_GPG4_LCDPWRDN (0x03 << 8) #define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ #define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) #define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) #define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) #define S3C2410_GPG10_EINT18 (0x02 << 20) @@ -660,7 +445,6 @@ #define S3C2443_GPMUP S3C2410_GPIOREG(0x108) /* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) @@ -674,14 +458,6 @@ #define S3C2410_MISCCR_SPUCR_LEN (0<<1) #define S3C2410_MISCCR_SPUCR_LDIS (1<<1) -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - #define S3C2410_MISCCR_USBDEV (0<<3) #define S3C2410_MISCCR_USBHOST (1<<3) @@ -728,7 +504,6 @@ * * Samsung datasheet p9-25 */ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) @@ -796,22 +571,6 @@ #define S3C2410_GSTATUS2_OFFRESET (1<<1) #define S3C2410_GSTATUS2_PONRESET (1<<0) -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - /* 2412/2413 sleep configuration registers */ #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 988a6863e54b..e0c67b0163d8 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -145,29 +145,8 @@ #define S3C2410_BANKCON_Tacs_SHIFT (13) #define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) #define S3C2410_BANKCON_SDRAM (0x3 << 15) -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - /* next bits only for SDRAM in 6,7 */ #define S3C2410_BANKCON_Trcd2 (0x00 << 2) #define S3C2410_BANKCON_Trcd3 (0x01 << 2) @@ -194,12 +173,6 @@ #define S3C2410_REFRESH_TRP_3clk (1<<20) #define S3C2410_REFRESH_TRP_4clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - #define S3C2410_REFRESH_TSRC_MASK (3<<18) #define S3C2410_REFRESH_TSRC_4clk (0<<18) #define S3C2410_REFRESH_TSRC_5clk (1<<18) @@ -222,7 +195,6 @@ #define S3C2410_BANKSIZE_4M (0x5 << 0) #define S3C2410_BANKSIZE_2M (0x4 << 0) #define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) #define S3C2410_BANKSIZE_SCLK_EN (1<<4) #define S3C2410_BANKSIZE_SCKE_EN (1<<5) #define S3C2410_BANKSIZE_BURST (1<<7) diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index e82ab4aa7ab9..c2cf4e569989 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -15,7 +15,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ + depends on ARCH_S3C2410 && !CPU_S3C2410 && \ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 4a10c0f684b2..c1fc6c6fac72 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -46,7 +46,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> #include <plat/s3c2416.h> @@ -55,7 +54,6 @@ /* table of supported CPUs */ -static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2416[] = "S3C2416/S3C2450"; @@ -157,15 +155,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2443_init, .name = name_s3c2443, }, - { - .idcode = 0x0, /* S3C2400 doesn't have an idcode */ - .idmask = 0xffffffff, - .map_io = s3c2400_map_io, - .init_clocks = s3c2400_init_clocks, - .init_uarts = s3c2400_init_uarts, - .init = s3c2400_init, - .name = name_s3c2400 - }, }; /* minimal IO mapping */ @@ -200,11 +189,7 @@ static unsigned long s3c24xx_read_idcode_v5(void) static unsigned long s3c24xx_read_idcode_v4(void) { -#ifndef CONFIG_CPU_S3C2400 return __raw_readl(S3C2410_GSTATUS1); -#else - return 0UL; -#endif } /* Hook for arm_pm_restart to ensure we execute the reset code diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h index a6f1d5df13b4..cc44e0e931e9 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -64,14 +64,5 @@ #define S3C2410_IISFCON_RXMASK (0x3f) #define S3C2410_IISFCON_RXSHIFT (0) -#define S3C2400_IISFCON_TXDMA (1<<11) -#define S3C2400_IISFCON_RXDMA (1<<10) -#define S3C2400_IISFCON_TXENABLE (1<<9) -#define S3C2400_IISFCON_RXENABLE (1<<8) -#define S3C2400_IISFCON_TXMASK (0x07 << 4) -#define S3C2400_IISFCON_TXSHIFT (4) -#define S3C2400_IISFCON_RXMASK (0x07) -#define S3C2400_IISFCON_RXSHIFT (0) - #define S3C2410_IISFIFO (0x10) #endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h index 2b35479ee35c..892e2f680fca 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h @@ -67,7 +67,6 @@ #define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ #define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */ #define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ #define S3C2410_SPPRE (0x0C) diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h deleted file mode 100644 index b3feaea5c70b..000000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 09-Fev-2006 LCVR First version, based on s3c2410.h -*/ - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_init(void); - -extern void s3c2400_map_io(void); - -extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2400_init_clocks(int xtal); - -#else -#define s3c2400_init_clocks NULL -#define s3c2400_init_uarts NULL -#define s3c2400_map_io NULL -#define s3c2400_init NULL -#endif diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 65ccbce816d4..8f41e1123461 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -457,7 +457,6 @@ config SERIAL_SAMSUNG_UARTS_4 config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG - default 2 if ARCH_S3C2400 default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 @@ -489,13 +488,6 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_S3C2400 - tristate "Samsung S3C2410 Serial port support" - depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 - default y if CPU_S3C2400 - help - Serial port support for the Samsung S3C2400 SoC - config SERIAL_S3C2410 tristate "Samsung S3C2410 Serial port support" depends on SERIAL_SAMSUNG && CPU_S3C2410 diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index ee0df586756c..83b4da6a1062 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o diff --git a/drivers/tty/serial/s3c2400.c b/drivers/tty/serial/s3c2400.c deleted file mode 100644 index d13051b3df87..000000000000 --- a/drivers/tty/serial/s3c2400.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Driver for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <asm/irq.h> - -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - clk->divisor = 1; - clk->name = "pclk"; - - return 0; -} - -static int s3c2400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - return 0; -} - -static int s3c2400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2400_uart_inf = { - .name = "Samsung S3C2400 UART", - .type = PORT_S3C2400, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2400_serial_getsource, - .set_clksrc = s3c2400_serial_setsource, - .reset_port = s3c2400_serial_resetport, -}; - -static int s3c2400_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); -} - -static struct platform_driver s3c2400_serial_driver = { - .probe = s3c2400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2400-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf); - -static inline int s3c2400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf); -} - -static inline void s3c2400_serial_exit(void) -{ - platform_driver_unregister(&s3c2400_serial_driver); -} - -module_init(s3c2400_serial_init); -module_exit(s3c2400_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2400-uart"); |
