diff options
63 files changed, 3431 insertions, 273 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt new file mode 100644 index 000000000000..f64de95a8e8b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -0,0 +1,51 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver + +Required properties: + - compatible: value should be one of the following: + "atmel,sama5d3-hlcdc" + - reg: base address and size of the HLCDC device registers. + - clock-names: the name of the 3 clocks requested by the HLCDC device. + Should contain "periph_clk", "sys_clk" and "slow_clk". + - clocks: should contain the 3 clocks requested by the HLCDC device. + - interrupts: should contain the description of the HLCDC interrupt line + +The HLCDC IP exposes two subdevices: + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt + - a Display Controller: see ../drm/atmel-hlcdc-dc.txt + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 678f3cf0b8f0..75fdfaf41831 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -34,6 +34,12 @@ to get matched with their hardware counterparts as follow: -BUCKn : for BUCKs, where n can lie in range 1 to 9. example: BUCK1, BUCK5, BUCK9. + Regulators which can be turned off during system suspend: + -LDOn : 2, 6-8, 10-12, 14-16, + -BUCKn : 1-4. + Use standard regulator bindings for it ('regulator-off-in-suspend'). + + Example: max77686@09 { diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 11921cc417bf..01e9f30fe678 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -27,6 +27,20 @@ Optional properties: [*] refer Documentation/devicetree/bindings/regulator/regulator.txt +- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide + users with tactile feedback. PWM period and duty-cycle are varied in + order to provide the approprite level of feedback. + + Required properties: + - compatible : Must be "maxim,max77693-hpatic" + - haptic-supply : power supply for the haptic motor + [*] refer Documentation/devicetree/bindings/regulator/regulator.txt + - pwms : phandle to the physical PWM(Pulse Width Modulation) device. + PWM properties should be named "pwms". And number of cell is different + for each pwm device. + To get more informations, please refer to documentaion. + [*] refer Documentation/devicetree/bindings/pwm/pwm.txt + Example: max77693@66 { compatible = "maxim,max77693"; @@ -52,4 +66,11 @@ Example: regulator-boot-on; }; }; + + haptic { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&haptic_supply>; + pwms = <&pwm 0 40000 0>; + pwm-names = "haptic"; + }; }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 0e4026a6cbbf..57a045016fca 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" - or "samsung,s2mpu02-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -17,8 +17,8 @@ Optional properties: - interrupts: Interrupt specifiers for interrupt sources. Optional nodes: -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz - outputs, so to register these as clocks with common clock framework +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 + KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : [Documentation/devicetree/bindings/clock/clock-bindings.txt] @@ -30,12 +30,12 @@ Optional nodes: the clock which they consume. Clock ID Devices ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 - 32KhzCP 1 S2MPS11, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk", - "samsung,s5m8767-clk" + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are: - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are: - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index b7797fb12e12..7bb13af8e214 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -23,6 +23,7 @@ #include <linux/clk-provider.h> #include <linux/platform_device.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s5m8767.h> #include <linux/mfd/samsung/core.h> @@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = { }, }; +static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = { + [S2MPS11_CLK_AP] = { + .name = "s2mps13_ap", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_CP] = { + .name = "s2mps13_cp", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_BT] = { + .name = "s2mps13_bt", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = { [S2MPS11_CLK_AP] = { .name = "s2mps14_ap", @@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev) s2mps11_reg = S2MPS11_REG_RTC_CTRL; clks_init = s2mps11_clks_init; break; + case S2MPS13X: + s2mps11_reg = S2MPS13_REG_RTCCTRL; + clks_init = s2mps13_clks_init; + break; case S2MPS14X: s2mps11_reg = S2MPS14_REG_RTCCTRL; clks_init = s2mps14_clks_init; @@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev) static const struct platform_device_id s2mps11_clk_id[] = { { "s2mps11-clk", S2MPS11X}, + { "s2mps13-clk", S2MPS13X}, { "s2mps14-clk", S2MPS14X}, { "s5m8767-clk", S5M8767X}, { }, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0959ca9b6b27..23dfd5f59b39 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -905,4 +905,16 @@ config GPIO_VIPERBOARD River Tech's viperboard.h for detailed meaning of the module parameters. +config GPIO_DLN2 + tristate "Diolan DLN2 GPIO support" + depends on MFD_DLN2 + select GPIOLIB_IRQCHIP + + help + Select this option to enable GPIO driver for the Diolan DLN2 + board. + + This driver can also be built as a module. If so, the module + will be called gpio-dln2. + endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index e5d346cf3b6e..e60677b8ccb4 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o +obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o obj-$(CONFIG_GPIO_EM) += gpio-em.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c new file mode 100644 index 000000000000..978b51eae2ec --- /dev/null +++ b/drivers/gpio/gpio-dln2.c @@ -0,0 +1,553 @@ +/* + * Driver for the Diolan DLN-2 USB-GPIO adapter + * + * Copyright (c) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/irqdomain.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/gpio.h> +#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/mfd/dln2.h> + +#define DLN2_GPIO_ID 0x01 + +#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID) +#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID) +#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID) +#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID) +#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID) + +#define DLN2_GPIO_EVENT_NONE 0 +#define DLN2_GPIO_EVENT_CHANGE 1 +#define DLN2_GPIO_EVENT_LVL_HIGH 2 +#define DLN2_GPIO_EVENT_LVL_LOW 3 +#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11 +#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21 +#define DLN2_GPIO_EVENT_MASK 0x0F + +#define DLN2_GPIO_MAX_PINS 32 + +struct dln2_irq_work { + struct work_struct work; + struct dln2_gpio *dln2; + int pin; + int type; +}; + +struct dln2_gpio { + struct platform_device *pdev; + struct gpio_chip gpio; + + /* + * Cache pin direction to save us one transfer, since the hardware has + * separate commands to read the in and out values. + */ + DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS); + + DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS); + DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS); + DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS); + struct dln2_irq_work *irq_work; +}; + +struct dln2_gpio_pin { + __le16 pin; +}; + +struct dln2_gpio_pin_val { + __le16 pin __packed; + u8 value; +}; + +static int dln2_gpio_get_pin_count(struct platform_device *pdev) +{ + int ret; + __le16 count; + int len = sizeof(count); + + ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len); + if (ret < 0) + return ret; + if (len < sizeof(count)) + return -EPROTO; + + return le16_to_cpu(count); +} + +static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin) +{ + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + + return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req)); +} + +static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin) +{ + int ret; + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + + ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) + return -EPROTO; + + return rsp.value; +} + +static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2, + unsigned int pin, int value) +{ + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(pin), + .value = value, + }; + + dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req, + sizeof(req)); +} + +#define DLN2_GPIO_DIRECTION_IN 0 +#define DLN2_GPIO_DIRECTION_OUT 1 + +static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(offset), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + int ret; + + ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset); + if (ret < 0) + return ret; + + /* cache the pin direction */ + ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION, + &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) { + ret = -EPROTO; + goto out_disable; + } + + switch (rsp.value) { + case DLN2_GPIO_DIRECTION_IN: + clear_bit(offset, dln2->output_enabled); + return 0; + case DLN2_GPIO_DIRECTION_OUT: + set_bit(offset, dln2->output_enabled); + return 0; + default: + ret = -EPROTO; + goto out_disable; + } + +out_disable: + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); + return ret; +} + +static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); +} + +static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + if (test_bit(offset, dln2->output_enabled)) + return GPIOF_DIR_OUT; + + return GPIOF_DIR_IN; +} + +static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + int dir; + + dir = dln2_gpio_get_direction(chip, offset); + if (dir < 0) + return dir; + + if (dir == GPIOF_DIR_IN) + return dln2_gpio_pin_get_in_val(dln2, offset); + + return dln2_gpio_pin_get_out_val(dln2, offset); +} + +static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + dln2_gpio_pin_set_out_val(dln2, offset, value); +} + +static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset, + unsigned dir) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(offset), + .value = dir, + }; + int ret; + + ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION, + &req, sizeof(req)); + if (ret < 0) + return ret; + + if (dir == DLN2_GPIO_DIRECTION_OUT) + set_bit(offset, dln2->output_enabled); + else + clear_bit(offset, dln2->output_enabled); + + return ret; +} + +static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN); +} + +static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT); +} + +static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + __le32 duration = cpu_to_le32(debounce); + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE, + &duration, sizeof(duration)); +} + +static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin, + unsigned type, unsigned period) +{ + struct { + __le16 pin; + u8 type; + __le16 period; + } __packed req = { + .pin = cpu_to_le16(pin), + .type = type, + .period = cpu_to_le16(period), + }; + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG, + &req, sizeof(req)); +} + +static void dln2_irq_work(struct work_struct *w) +{ + struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work); + struct dln2_gpio *dln2 = iw->dln2; + u8 type = iw->type & DLN2_GPIO_EVENT_MASK; + + if (test_bit(iw->pin, dln2->irqs_enabled)) + dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0); + else + dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0); +} + +static void dln2_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + set_bit(pin, dln2->irqs_enabled); + schedule_work(&dln2->irq_work[pin].work); +} + +static void dln2_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + clear_bit(pin, dln2->irqs_enabled); + schedule_work(&dln2->irq_work[pin].work); +} + +static void dln2_irq_mask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + set_bit(pin, dln2->irqs_masked); +} + +static void dln2_irq_unmask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + struct device *dev = dln2->gpio.dev; + int pin = irqd_to_hwirq(irqd); + + if (test_and_clear_bit(pin, dln2->irqs_pending)) { + int irq; + + irq = irq_find_mapping(dln2->gpio.irqdomain, pin); + if (!irq) { + dev_err(dev, "pin %d not mapped to IRQ\n", pin); + return; + } + + generic_handle_irq(irq); + } +} + +static int dln2_irq_set_type(struct irq_data *irqd, unsigned type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW; + break; + case IRQ_TYPE_EDGE_BOTH: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE; + break; + case IRQ_TYPE_EDGE_RISING: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct irq_chip dln2_gpio_irqchip = { + .name = "dln2-irq", + .irq_enable = dln2_irq_enable, + .irq_disable = dln2_irq_disable, + .irq_mask = dln2_irq_mask, + .irq_unmask = dln2_irq_unmask, + .irq_set_type = dln2_irq_set_type, +}; + +static void dln2_gpio_event(struct platform_device *pdev, u16 echo, + const void *data, int len) +{ + int pin, irq; + const struct { + __le16 count; + __u8 type; + __le16 pin; + __u8 value; + } __packed *event = data; + struct dln2_gpio *dln2 = platform_get_drvdata(pdev); + + if (len < sizeof(*event)) { + dev_err(dln2->gpio.dev, "short event message\n"); + return; + } + + pin = le16_to_cpu(event->pin); + if (pin >= dln2->gpio.ngpio) { + dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin); + return; + } + + irq = irq_find_mapping(dln2->gpio.irqdomain, pin); + if (!irq) { + dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin); + return; + } + + if (!test_bit(pin, dln2->irqs_enabled)) + return; + if (test_bit(pin, dln2->irqs_masked)) { + set_bit(pin, dln2->irqs_pending); + return; + } + + switch (dln2->irq_work[pin].type) { + case DLN2_GPIO_EVENT_CHANGE_RISING: + if (event->value) + generic_handle_irq(irq); + break; + case DLN2_GPIO_EVENT_CHANGE_FALLING: + if (!event->value) + generic_handle_irq(irq); + break; + default: + generic_handle_irq(irq); + } +} + +static int dln2_gpio_probe(struct platform_device *pdev) +{ + struct dln2_gpio *dln2; + struct device *dev = &pdev->dev; + int pins; + int i, ret; + + pins = dln2_gpio_get_pin_count(pdev); + if (pins < 0) { + dev_err(dev, "failed to get pin count: %d\n", pins); + return pins; + } + if (pins > DLN2_GPIO_MAX_PINS) { + pins = DLN2_GPIO_MAX_PINS; + dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS); + } + + dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->irq_work = devm_kcalloc(&pdev->dev, pins, + sizeof(struct dln2_irq_work), GFP_KERNEL); + if (!dln2->irq_work) + return -ENOMEM; + for (i = 0; i < pins; i++) { + INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work); + dln2->irq_work[i].pin = i; + dln2->irq_work[i].dln2 = dln2; + } + + dln2->pdev = pdev; + + dln2->gpio.label = "dln2"; + dln2->gpio.dev = dev; + dln2->gpio.owner = THIS_MODULE; + dln2->gpio.base = -1; + dln2->gpio.ngpio = pins; + dln2->gpio.exported = true; + dln2->gpio.can_sleep = true; + dln2->gpio.irq_not_threaded = true; + dln2->gpio.set = dln2_gpio_set; + dln2->gpio.get = dln2_gpio_get; + dln2->gpio.request = dln2_gpio_request; + dln2->gpio.free = dln2_gpio_free; + dln2->gpio.get_direction = dln2_gpio_get_direction; + dln2->gpio.direction_input = dln2_gpio_direction_input; + dln2->gpio.direction_output = dln2_gpio_direction_output; + dln2->gpio.set_debounce = dln2_gpio_set_debounce; + + platform_set_drvdata(pdev, dln2); + + ret = gpiochip_add(&dln2->gpio); + if (ret < 0) { + dev_err(dev, "failed to add gpio chip: %d\n", ret); + goto out; + } + + ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (ret < 0) { + dev_err(dev, "failed to add irq chip: %d\n", ret); + goto out_gpiochip_remove; + } + + ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV, + dln2_gpio_event); + if (ret) { + dev_err(dev, "failed to register event cb: %d\n", ret); + goto out_gpiochip_remove; + } + + return 0; + +out_gpiochip_remove: + gpiochip_remove(&dln2->gpio); +out: + return ret; +} + +static int dln2_gpio_remove(struct platform_device *pdev) +{ + struct dln2_gpio *dln2 = platform_get_drvdata(pdev); + int i; + + dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV); + for (i = 0; i < dln2->gpio.ngpio; i++) + flush_work(&dln2->irq_work[i].work); + gpiochip_remove(&dln2->gpio); + + return 0; +} + +static struct platform_driver dln2_gpio_driver = { + .driver.name = "dln2-gpio", + .probe = dln2_gpio_probe, + .remove = dln2_gpio_remove, +}; + +module_platform_driver(dln2_gpio_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dln2-gpio"); diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c index ae0f6466eb09..abdcf58935f5 100644 --- a/drivers/gpio/gpio-tc3589x.c +++ b/drivers/gpio/gpio-tc3589x.c @@ -262,7 +262,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev) tc3589x_gpio->chip = template_chip; tc3589x_gpio->chip.ngpio = tc3589x->num_gpio; tc3589x_gpio->chip.dev = &pdev->dev; - tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1; + tc3589x_gpio->chip.base = -1; #ifdef CONFIG_OF_GPIO tc3589x_gpio->chip.of_node = np; diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index e6d8e18dae97..6a58b6c723aa 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -641,9 +641,6 @@ static int sensor_hub_probe(struct hid_device *hdev, goto err_stop_hw; } sd->hid_sensor_hub_client_devs[ - sd->hid_sensor_client_cnt].id = - PLATFORM_DEVID_AUTO; - sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].name = name; sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].platform_data = @@ -659,8 +656,9 @@ static int sensor_hub_probe(struct hid_device *hdev, if (last_hsdev) last_hsdev->end_collection_index = i; - ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs, - sd->hid_sensor_client_cnt, NULL, 0, NULL); + ret = mfd_add_hotplug_devices(&hdev->dev, + sd->hid_sensor_hub_client_devs, + sd->hid_sensor_client_cnt); if (ret < 0) goto err_stop_hw; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 917c3585f45b..b4d135cc2f39 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -881,6 +881,16 @@ config I2C_DIOLAN_U2C This driver can also be built as a module. If so, the module will be called i2c-diolan-u2c. +config I2C_DLN2 + tristate "Diolan DLN-2 USB I2C adapter" + depends on MFD_DLN2 + help + If you say yes to this option, support will be included for Diolan + DLN2, a USB to I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-dln2. + config I2C_PARPORT tristate "Parallel port adapter" depends on PARPORT diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 78d56c54ba2b..cdac7f15eab5 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o +obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c new file mode 100644 index 000000000000..b3fb86af4cbb --- /dev/null +++ b/drivers/i2c/busses/i2c-dln2.c @@ -0,0 +1,262 @@ +/* + * Driver for the Diolan DLN-2 USB-I2C adapter + * + * Copyright (c) 2014 Intel Corporation + * + * Derived from: + * i2c-diolan-u2c.c + * Copyright (c) 2010-2011 Ericsson AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/dln2.h> + +#define DLN2_I2C_MODULE_ID 0x03 +#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID) + +/* I2C commands */ +#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00) +#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01) +#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02) +#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03) +#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06) +#define DLN2_I2C_READ DLN2_I2C_CMD(0x07) +#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08) +#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09) +#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A) +#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B) +#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C) +#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D) +#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E) + +#define DLN2_I2C_MAX_XFER_SIZE 256 +#define DLN2_I2C_BUF_SIZE (DLN2_I2C_MAX_XFER_SIZE + 16) + +struct dln2_i2c { + struct platform_device *pdev; + struct i2c_adapter adapter; + u8 port; + /* + * Buffer to hold the packet for read or write transfers. One is enough + * since we can't have multiple transfers in parallel on the i2c bus. + */ + void *buf; +}; + +static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable) +{ + u16 cmd; + struct { + u8 port; + } tx; + + tx.port = dln2->port; + + if (enable) + cmd = DLN2_I2C_ENABLE; + else + cmd = DLN2_I2C_DISABLE; + + return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx)); +} + +static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr, + u8 *data, u16 data_len) +{ + int ret; + struct { + u8 port; + u8 addr; + u8 mem_addr_len; + __le32 mem_addr; + __le16 buf_len; + u8 buf[DLN2_I2C_MAX_XFER_SIZE]; + } __packed *tx = dln2->buf; + unsigned len; + + BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE); + + tx->port = dln2->port; + tx->addr = addr; + tx->mem_addr_len = 0; + tx->mem_addr = 0; + tx->buf_len = cpu_to_le16(data_len); + memcpy(tx->buf, data, data_len); + + len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE; + ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len); + if (ret < 0) + return ret; + + return data_len; +} + +static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data, + u16 data_len) +{ + int ret; + struct { + u8 port; + u8 addr; + u8 mem_addr_len; + __le32 mem_addr; + __le16 buf_len; + } __packed tx; + struct { + __le16 buf_len; + u8 buf[DLN2_I2C_MAX_XFER_SIZE]; + } __packed *rx = dln2->buf; + unsigned rx_len = sizeof(*rx); + + BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE); + + tx.port = dln2->port; + tx.addr = addr; + tx.mem_addr_len = 0; + tx.mem_addr = 0; + tx.buf_len = cpu_to_le16(data_len); + + ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx), + rx, &rx_len); + if (ret < 0) + return ret; + if (rx_len < sizeof(rx->buf_len) + data_len) + return -EPROTO; + if (le16_to_cpu(rx->buf_len) != data_len) + return -EPROTO; + + memcpy(data, rx->buf, data_len); + + return data_len; +} + +static int dln2_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct dln2_i2c *dln2 = i2c_get_adapdata(adapter); + struct i2c_msg *pmsg; + struct device *dev = &dln2->adapter.dev; + int i; + + for (i = 0; i < num; i++) { + int ret; + + pmsg = &msgs[i]; + + if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) { + dev_warn(dev, "maximum transfer size exceeded\n"); + return -EOPNOTSUPP; + } + + if (pmsg->flags & I2C_M_RD) { + ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf, + pmsg->len); + if (ret < 0) + return ret; + + pmsg->len = ret; + } else { + ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf, + pmsg->len); + if (ret != pmsg->len) + return -EPROTO; + } + } + + return num; +} + +static u32 dln2_i2c_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static const struct i2c_algorithm dln2_i2c_usb_algorithm = { + .master_xfer = dln2_i2c_xfer, + .functionality = dln2_i2c_func, +}; + +static int dln2_i2c_probe(struct platform_device *pdev) +{ + int ret; + struct dln2_i2c *dln2; + struct device *dev = &pdev->dev; + struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev); + + dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL); + if (!dln2->buf) + return -ENOMEM; + + dln2->pdev = pdev; + dln2->port = pdata->port; + + /* setup i2c adapter description */ + dln2->adapter.owner = THIS_MODULE; + dln2->adapter.class = I2C_CLASS_HWMON; + dln2->adapter.algo = &dln2_i2c_usb_algorithm; + dln2->adapter.dev.parent = dev; + i2c_set_adapdata(&dln2->adapter, dln2); + snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d", + "dln2-i2c", dev_name(pdev->dev.parent), dln2->port); + + platform_set_drvdata(pdev, dln2); + + /* initialize the i2c interface */ + ret = dln2_i2c_enable(dln2, true); + if (ret < 0) { + dev_err(dev, "failed to initialize adapter: %d\n", ret); + return ret; + } + + /* and finally attach to i2c layer */ + ret = i2c_add_adapter(&dln2->adapter); + if (ret < 0) { + dev_err(dev, "failed to add I2C adapter: %d\n", ret); + goto out_disable; + } + + return 0; + +out_disable: + dln2_i2c_enable(dln2, false); + + return ret; +} + +static int dln2_i2c_remove(struct platform_device *pdev) +{ + struct dln2_i2c *dln2 = platform_get_drvdata(pdev); + + i2c_del_adapter(&dln2->adapter); + dln2_i2c_enable(dln2, false); + + return 0; +} + +static struct platform_driver dln2_i2c_driver = { + .driver.name = "dln2-i2c", + .probe = dln2_i2c_probe, + .remove = dln2_i2c_remove, +}; + +module_platform_driver(dln2_i2c_driver); + +MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>"); +MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dln2-i2c"); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 88bdc8f612e2..bc4e787096e8 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -127,6 +127,14 @@ config AT91_ADC help Say yes here to build support for Atmel AT91 ADC. +config AXP288_ADC + tristate "X-Powers AXP288 ADC driver" + depends on MFD_AXP20X + help + Say yes here to have support for X-Powers power management IC (PMIC) ADC + device. Depending on platform configuration, this general purpose ADC can + be used for sampling sensors such as thermal resistors. + config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index cb88a6a23b8f..f30093f5b67a 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1027) += max1027.o diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c new file mode 100644 index 000000000000..08bcfb061ca5 --- /dev/null +++ b/drivers/iio/adc/axp288_adc.c @@ -0,0 +1,261 @@ +/* + * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver + * + * Copyright (C) 2014 Intel Corporation + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/mfd/axp20x.h> +#include <linux/platform_device.h> + +#include <linux/iio/iio.h> +#include <linux/iio/machine.h> +#include <linux/iio/driver.h> + +#define AXP288_ADC_EN_MASK 0xF1 +#define AXP288_ADC_TS_PIN_GPADC 0xF2 +#define AXP288_ADC_TS_PIN_ON 0xF3 + +enum axp288_adc_id { + AXP288_ADC_TS, + AXP288_ADC_PMIC, + AXP288_ADC_GP, + AXP288_ADC_BATT_CHRG_I, + AXP288_ADC_BATT_DISCHRG_I, + AXP288_ADC_BATT_V, + AXP288_ADC_NR_CHAN, +}; + +struct axp288_adc_info { + int irq; + struct regmap *regmap; +}; + +static const struct iio_chan_spec const axp288_adc_channels[] = { + { + .indexed = 1, + .type = IIO_TEMP, + .channel = 0, + .address = AXP288_TS_ADC_H, + .datasheet_name = "TS_PIN", + }, { + .indexed = 1, + .type = IIO_TEMP, + .channel = 1, + .address = AXP288_PMIC_ADC_H, + .datasheet_name = "PMIC_TEMP", + }, { + .indexed = 1, + .type = IIO_TEMP, + .channel = 2, + .address = AXP288_GP_ADC_H, + .datasheet_name = "GPADC", + }, { + .indexed = 1, + .type = IIO_CURRENT, + .channel = 3, + .address = AXP20X_BATT_CHRG_I_H, + .datasheet_name = "BATT_CHG_I", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, { + .indexed = 1, + .type = IIO_CURRENT, + .channel = 4, + .address = AXP20X_BATT_DISCHRG_I_H, + .datasheet_name = "BATT_DISCHRG_I", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, { + .indexed = 1, + .type = IIO_VOLTAGE, + .channel = 5, + .address = AXP20X_BATT_V_H, + .datasheet_name = "BATT_V", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, +}; + +#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \ + _consumer_channel) \ + { \ + .adc_channel_label = _adc_channel_label, \ + .consumer_dev_name = _consumer_dev_name, \ + .consumer_channel = _consumer_channel, \ + } + +/* for consumer drivers */ +static struct iio_map axp288_adc_default_maps[] = { + AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"), + AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"), + AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"), + AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"), + AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"), + AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"), + {}, +}; + +static int axp288_adc_read_channel(int *val, unsigned long address, + struct regmap *regmap) +{ + u8 buf[2]; + + if (regmap_bulk_read(regmap, address, buf, 2)) + return -EIO; + *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F); + + return IIO_VAL_INT; +} + +static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode, + unsigned long address) +{ + /* channels other than GPADC do not need to switch TS pin */ + if (address != AXP288_GP_ADC_H) + return 0; + + return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode); +} + +static int axp288_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct axp288_adc_info *info = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC, + chan->address)) { + dev_err(&indio_dev->dev, "GPADC mode\n"); + ret = -EINVAL; + break; + } + ret = axp288_adc_read_channel(val, chan->address, info->regmap); + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON, + chan->address)) + dev_err(&indio_dev->dev, "TS pin restore\n"); + break; + case IIO_CHAN_INFO_PROCESSED: + ret = axp288_adc_read_channel(val, chan->address, info->regmap); + break; + default: + ret = -EINVAL; + } + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int axp288_adc_set_state(struct regmap *regmap) +{ + /* ADC should be always enabled for internal FG to function */ + if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON)) + return -EIO; + + return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK); +} + +static const struct iio_info axp288_adc_iio_info = { + .read_raw = &axp288_adc_read_raw, + .driver_module = THIS_MODULE, +}; + +static int axp288_adc_probe(struct platform_device *pdev) +{ + int ret; + struct axp288_adc_info *info; + struct iio_dev *indio_dev; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + + info = iio_priv(indio_dev); + info->irq = platform_get_irq(pdev, 0); + if (info->irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + return info->irq; + } + platform_set_drvdata(pdev, indio_dev); + info->regmap = axp20x->regmap; + /* + * Set ADC to enabled state at all time, including system suspend. + * otherwise internal fuel gauge functionality may be affected. + */ + ret = axp288_adc_set_state(axp20x->regmap); + if (ret) { + dev_err(&pdev->dev, "unable to enable ADC device\n"); + return ret; + } + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = pdev->name; + indio_dev->channels = axp288_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels); + indio_dev->info = &axp288_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + ret = iio_map_array_register(indio_dev, axp288_adc_default_maps); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register iio device\n"); + goto err_array_unregister; + } + return 0; + +err_array_unregister: + iio_map_array_unregister(indio_dev); + + return ret; +} + +static int axp288_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + iio_device_unregister(indio_dev); + iio_map_array_unregister(indio_dev); + + return 0; +} + +static struct platform_device_id axp288_adc_id_table[] = { + { .name = "axp288_adc" }, + {}, +}; + +static struct platform_driver axp288_adc_driver = { + .probe = axp288_adc_probe, + .remove = axp288_adc_remove, + .id_table = axp288_adc_id_table, + .driver = { + .name = "axp288_adc", + }, +}; + +MODULE_DEVICE_TABLE(platform, axp288_adc_id_table); + +module_platform_driver(axp288_adc_driver); + +MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>"); +MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1456ea70bbc7..2e6b7311fabc 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -59,6 +59,17 @@ config MFD_AAT2870_CORE additional drivers must be enabled in order to use the functionality of the device. +config MFD_ATMEL_HLCDC + tristate "Atmel HLCDC (High-end LCD Controller)" + select MFD_CORE + select REGMAP_MMIO + depends on OF + help + If you say yes here you get support for the HLCDC block. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_BCM590XX tristate "Broadcom BCM590xx PMUs" select MFD_CORE @@ -74,7 +85,8 @@ config MFD_AXP20X select REGMAP_IRQ depends on I2C=y help - If you say Y here you get support for the X-Powers AXP202 and AXP209. + If you say Y here you get support for the X-Powers AXP202, AXP209 and + AXP288 power management IC (PMIC). This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. @@ -183,6 +195,16 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. +config MFD_DLN2 + tristate "Diolan DLN2 support" + select MFD_CORE + depends on USB + help + This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter + DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, + etc. must be enabled in order to use the functionality of + the device. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) @@ -655,7 +677,6 @@ config MFD_SEC_CORE select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - select REGULATOR help Support for the Samsung Electronics MFD series. This driver provides common support for accessing the device, diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8bd54b1253af..53467e211381 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o -rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o +rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o @@ -157,6 +157,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o +obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o obj-$(CONFIG_MFD_PALMAS) += palmas.o obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o @@ -174,6 +175,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o +obj-$(CONFIG_MFD_DLN2) += dln2.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 8e0dae59844d..94dbcdd2a1ff 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -85,63 +85,6 @@ shutdown: } } -/* - * Use the AB WD to reset the platform. It will perform a hard - * reset instead of a soft reset. Write the reset reason to - * the AB before reset, which can be read upon restart. - */ -void ab8500_restart(char mode, const char *cmd) -{ - struct ab8500_platform_data *plat; - struct ab8500_sysctrl_platform_data *pdata; - u16 reason = 0; - u8 val; - - if (sysctrl_dev == NULL) { - pr_err("%s: sysctrl not initialized\n", __func__); - return; - } - - plat = dev_get_platdata(sysctrl_dev->parent); - pdata = plat->sysctrl; - if (pdata && pdata->reboot_reason_code) - reason = pdata->reboot_reason_code(cmd); - else - pr_warn("[%s] No reboot reason set. Default reason %d\n", - __func__, reason); - - /* - * Disable RTC alarm, just a precaution so that no alarm - * is running when WD reset is executed. - */ - abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC, - RTC_CTRL , &val); - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - RTC_CTRL , (val & ~RTC_ALARM_ENABLE)); - - /* - * Android is not using the RTC alarm registers during reboot - * so we borrow them for writing the reason of reset - */ - - /* reason[8 LSB] */ - val = reason & 0xFF; - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - AB8500_ALARM_MIN_LOW , val); - - /* reason[8 MSB] */ - val = (reason>>8) & 0xFF; - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - AB8500_ALARM_MIN_MID , val); - - /* Setting WD timeout to 0 */ - ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0); - - /* Setting the parameters to AB8500 WD*/ - ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD | - AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD)); -} - static inline bool valid_bank(u8 bank) { return ((bank == AB8500_SYS_CTRL1_BLOCK) || diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c index 5145d78bf07e..8ef58bcff193 100644 --- a/drivers/mfd/arizona-spi.c +++ b/drivers/mfd/arizona-spi.c @@ -75,7 +75,9 @@ static int arizona_spi_probe(struct spi_device *spi) static int arizona_spi_remove(struct spi_device *spi) { struct arizona *arizona = spi_get_drvdata(spi); + arizona_dev_exit(arizona); + return 0; } diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c new file mode 100644 index 000000000000..cfd58f4cc5c3 --- /dev/null +++ b/drivers/mfd/atmel-hlcdc.c @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/mfd/atmel-hlcdc.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define ATMEL_HLCDC_REG_MAX (0x4000 - 0x4) + +static const struct mfd_cell atmel_hlcdc_cells[] = { + { + .name = "atmel-hlcdc-pwm", + .of_compatible = "atmel,hlcdc-pwm", + }, + { + .name = "atmel-hlcdc-dc", + .of_compatible = "atmel,hlcdc-display-controller", + }, +}; + +static const struct regmap_config atmel_hlcdc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = ATMEL_HLCDC_REG_MAX, +}; + +static int atmel_hlcdc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct atmel_hlcdc *hlcdc; + struct resource *res; + void __iomem *regs; + + hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL); + if (!hlcdc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + hlcdc->irq = platform_get_irq(pdev, 0); + if (hlcdc->irq < 0) + return hlcdc->irq; + + hlcdc->periph_clk = devm_clk_get(dev, "periph_clk"); + if (IS_ERR(hlcdc->periph_clk)) { + dev_err(dev, "failed to get peripheral clock\n"); + return PTR_ERR(hlcdc->periph_clk); + } + + hlcdc->sys_clk = devm_clk_get(dev, "sys_clk"); + if (IS_ERR(hlcdc->sys_clk)) { + dev_err(dev, "failed to get system clock\n"); + return PTR_ERR(hlcdc->sys_clk); + } + + hlcdc->slow_clk = devm_clk_get(dev, "slow_clk"); + if (IS_ERR(hlcdc->slow_clk)) { + dev_err(dev, "failed to get slow clock\n"); + return PTR_ERR(hlcdc->slow_clk); + } + + hlcdc->regmap = devm_regmap_init_mmio(dev, regs, + &atmel_hlcdc_regmap_config); + if (IS_ERR(hlcdc->regmap)) + return PTR_ERR(hlcdc->regmap); + + dev_set_drvdata(dev, hlcdc); + + return mfd_add_devices(dev, -1, atmel_hlcdc_cells, + ARRAY_SIZE(atmel_hlcdc_cells), + NULL, 0, NULL); +} + +static int atmel_hlcdc_remove(struct platform_device *pdev) +{ + mfd_remove_devices(&pdev->dev); + + return 0; +} + +static const struct of_device_id atmel_hlcdc_match[] = { + { .compatible = "atmel,sama5d3-hlcdc" }, + { /* sentinel */ }, +}; + +static struct platform_driver atmel_hlcdc_driver = { + .probe = atmel_hlcdc_probe, + .remove = atmel_hlcdc_remove, + .driver = { + .name = "atmel-hlcdc", + .of_match_table = atmel_hlcdc_match, + }, +}; +module_platform_driver(atmel_hlcdc_driver); + +MODULE_ALIAS("platform:atmel-hlcdc"); +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Atmel HLCDC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 6231adbb295d..c522ee22b1c0 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -1,9 +1,9 @@ /* - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209 + * axp20x.c - MFD core driver for the X-Powers' Power Management ICs * - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC - * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature - * as well as 4 configurable GPIOs. + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. * * Author: Carlo Caione <carlo@caione.org> * @@ -25,9 +25,16 @@ #include <linux/mfd/core.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/acpi.h> #define AXP20X_OFF 0x80 +static const char const *axp20x_model_names[] = { + "AXP202", + "AXP209", + "AXP288", +}; + static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), @@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), }; +static const struct regmap_range axp288_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), +}; + +static const struct regmap_range axp288_volatile_ranges[] = { + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), +}; + +static const struct regmap_access_table axp288_writeable_table = { + .yes_ranges = axp288_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges), +}; + +static const struct regmap_access_table axp288_volatile_table = { + .yes_ranges = axp288_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), +}; + static struct resource axp20x_pek_resources[] = { { .name = "PEK_DBR", @@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = { }, }; +static struct resource axp288_battery_resources[] = { + { + .start = AXP288_IRQ_QWBTU, + .end = AXP288_IRQ_QWBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTU, + .end = AXP288_IRQ_WBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QWBTO, + .end = AXP288_IRQ_QWBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTO, + .end = AXP288_IRQ_WBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL2, + .end = AXP288_IRQ_WL2, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL1, + .end = AXP288_IRQ_WL1, + .flags = IORESOURCE_IRQ, + }, +}; + static const struct regmap_config axp20x_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = { .cache_type = REGCACHE_RBTREE, }; -#define AXP20X_IRQ(_irq, _off, _mask) \ - [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } +static const struct regmap_config axp288_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp288_writeable_table, + .volatile_table = &axp288_volatile_table, + .max_register = AXP288_FG_TUNE5, + .cache_type = REGCACHE_RBTREE, +}; + +#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } static const struct regmap_irq axp20x_regmap_irqs[] = { - AXP20X_IRQ(ACIN_OVER_V, 0, 7), - AXP20X_IRQ(ACIN_PLUGIN, 0, 6), - AXP20X_IRQ(ACIN_REMOVAL, 0, 5), - AXP20X_IRQ(VBUS_OVER_V, 0, 4), - AXP20X_IRQ(VBUS_PLUGIN, 0, 3), - AXP20X_IRQ(VBUS_REMOVAL, 0, 2), - AXP20X_IRQ(VBUS_V_LOW, 0, 1), - AXP20X_IRQ(BATT_PLUGIN, 1, 7), - AXP20X_IRQ(BATT_REMOVAL, 1, 6), - AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5), - AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4), - AXP20X_IRQ(CHARG, 1, 3), - AXP20X_IRQ(CHARG_DONE, 1, 2), - AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1), - AXP20X_IRQ(BATT_TEMP_LOW, 1, 0), - AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7), - AXP20X_IRQ(CHARG_I_LOW, 2, 6), - AXP20X_IRQ(DCDC1_V_LONG, 2, 5), - AXP20X_IRQ(DCDC2_V_LONG, 2, 4), - AXP20X_IRQ(DCDC3_V_LONG, 2, 3), - AXP20X_IRQ(PEK_SHORT, 2, 1), - AXP20X_IRQ(PEK_LONG, 2, 0), - AXP20X_IRQ(N_OE_PWR_ON, 3, 7), - AXP20X_IRQ(N_OE_PWR_OFF, 3, 6), - AXP20X_IRQ(VBUS_VALID, 3, 5), - AXP20X_IRQ(VBUS_NOT_VALID, 3, 4), - AXP20X_IRQ(VBUS_SESS_VALID, 3, 3), - AXP20X_IRQ(VBUS_SESS_END, 3, 2), - AXP20X_IRQ(LOW_PWR_LVL1, 3, 1), - AXP20X_IRQ(LOW_PWR_LVL2, 3, 0), - AXP20X_IRQ(TIMER, 4, 7), - AXP20X_IRQ(PEK_RIS_EDGE, 4, 6), - AXP20X_IRQ(PEK_FAL_EDGE, 4, 5), - AXP20X_IRQ(GPIO3_INPUT, 4, 3), - AXP20X_IRQ(GPIO2_INPUT, 4, 2), - AXP20X_IRQ(GPIO1_INPUT, 4, 1), - AXP20X_IRQ(GPIO0_INPUT, 4, 0), + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), + INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5), + INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4), + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0), + INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7), + INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6), + INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5), + INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4), + INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3), + INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1), + INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6), + INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0), + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6), + INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5), + INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3), + INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2), + INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1), + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), +}; + +/* some IRQs are compatible with axp20x models */ +static const struct regmap_irq axp288_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), + INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3), + INIT_REGMAP_IRQ(AXP288, OV, 0, 4), + + INIT_REGMAP_IRQ(AXP288, DONE, 1, 2), + INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3), + INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), + INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), + INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6), + INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7), + + INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), + INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), + INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3), + INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), + INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), + INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), + INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7), + + INIT_REGMAP_IRQ(AXP288, WL2, 3, 0), + INIT_REGMAP_IRQ(AXP288, WL1, 3, 1), + INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2), + INIT_REGMAP_IRQ(AXP288, OT, 3, 7), + + INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0), + INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1), + INIT_REGMAP_IRQ(AXP288, POKO, 4, 2), + INIT_REGMAP_IRQ(AXP288, POKL, 4, 3), + INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), + INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), + INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), + INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7), + + INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), + INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), }; static const struct of_device_id axp20x_of_match[] = { @@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); +static const struct acpi_device_id axp20x_acpi_match[] = { + { + .id = "INT33F4", + .driver_data = AXP288_ID, + }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { .name = "axp20x_irq_chip", .status_base = AXP20X_IRQ1_STATE, .ack_base = AXP20X_IRQ1_STATE, .mask_base = AXP20X_IRQ1_EN, - .num_regs = 5, + .mask_invert = true, + .init_ack_masked = true, .irqs = axp20x_regmap_irqs, .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), + .num_regs = 5, + +}; + +static const struct regmap_irq_chip axp288_regmap_irq_chip = { + .name = "axp288_irq_chip", + .status_base = AXP20X_IRQ1_STATE, + .ack_base = AXP20X_IRQ1_STATE, + .mask_base = AXP20X_IRQ1_EN, .mask_invert = true, .init_ack_masked = true, + .irqs = axp288_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp288_regmap_irqs), + .num_regs = 6, + }; static struct mfd_cell axp20x_cells[] = { @@ -150,36 +281,155 @@ static struct mfd_cell axp20x_cells[] = { }, }; +static struct resource axp288_adc_resources[] = { + { + .name = "GPADC", + .start = AXP288_IRQ_GPADC, + .end = AXP288_IRQ_GPADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource axp288_charger_resources[] = { + { + .start = AXP288_IRQ_OV, + .end = AXP288_IRQ_OV, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_DONE, + .end = AXP288_IRQ_DONE, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CHARGING, + .end = AXP288_IRQ_CHARGING, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_QUIT, + .end = AXP288_IRQ_SAFE_QUIT, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_ENTER, + .end = AXP288_IRQ_SAFE_ENTER, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTU, + .end = AXP288_IRQ_QCBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTU, + .end = AXP288_IRQ_CBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTO, + .end = AXP288_IRQ_QCBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTO, + .end = AXP288_IRQ_CBTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell axp288_cells[] = { + { + .name = "axp288_adc", + .num_resources = ARRAY_SIZE(axp288_adc_resources), + .resources = axp288_adc_resources, + }, + { + .name = "axp288_charger", + .num_resources = ARRAY_SIZE(axp288_charger_resources), + .resources = axp288_charger_resources, + }, + { + .name = "axp288_battery", + .num_resources = ARRAY_SIZE(axp288_battery_resources), + .resources = axp288_battery_resources, + }, +}; + static struct axp20x_dev *axp20x_pm_power_off; static void axp20x_power_off(void) { + if (axp20x_pm_power_off->variant == AXP288_ID) + return; + regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, AXP20X_OFF); } +static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) +{ + const struct acpi_device_id *acpi_id; + const struct of_device_id *of_id; + + if (dev->of_node) { + of_id = of_match_device(axp20x_of_match, dev); + if (!of_id) { + dev_err(dev, "Unable to match OF ID\n"); + return -ENODEV; + } + axp20x->variant = (long) of_id->data; + } else { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!acpi_id || !acpi_id->driver_data) { + dev_err(dev, "Unable to match ACPI ID and data\n"); + return -ENODEV; + } + axp20x->variant = (long) acpi_id->driver_data; + } + + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); + axp20x->cells = axp20x_cells; + axp20x->regmap_cfg = &axp20x_regmap_config; + axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; + break; + case AXP288_ID: + axp20x->cells = axp288_cells; + axp20x->nr_cells = ARRAY_SIZE(axp288_cells); + axp20x->regmap_cfg = &axp288_regmap_config; + axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; + break; + default: + dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); + return -EINVAL; + } + dev_info(dev, "AXP20x variant %s found\n", + axp20x_model_names[axp20x->variant]); + + return 0; +} + static int axp20x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct axp20x_dev *axp20x; - const struct of_device_id *of_id; int ret; axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); if (!axp20x) return -ENOMEM; - of_id = of_match_device(axp20x_of_match, &i2c->dev); - if (!of_id) { - dev_err(&i2c->dev, "Unable to setup AXP20X data\n"); - return -ENODEV; - } - axp20x->variant = (long) of_id->data; + ret = axp20x_match_device(axp20x, &i2c->dev); + if (ret) + return ret; axp20x->i2c_client = i2c; axp20x->dev = &i2c->dev; dev_set_drvdata(axp20x->dev, axp20x); - axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config); + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); if (IS_ERR(axp20x->regmap)) { ret = PTR_ERR(axp20x->regmap); dev_err(&i2c->dev, "regmap init failed: %d\n", ret); @@ -188,15 +438,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, IRQF_ONESHOT | IRQF_SHARED, -1, - &axp20x_regmap_irq_chip, + axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); return ret; } - ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells, - ARRAY_SIZE(axp20x_cells), NULL, 0, NULL); + ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, + axp20x->nr_cells, NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); @@ -234,6 +484,7 @@ static struct i2c_driver axp20x_i2c_driver = { .name = "axp20x", .owner = THIS_MODULE, .of_match_table = of_match_ptr(axp20x_of_match), + .acpi_match_table = ACPI_PTR(axp20x_acpi_match), }, .probe = axp20x_i2c_probe, .remove = axp20x_i2c_remove, diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index 93db8bb8c8f0..f38bc98a3c57 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -118,7 +118,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) da9063->irq_base = pdata->irq_base; } else { da9063->flags = 0; - da9063->irq_base = 0; + da9063->irq_base = -1; } da9063->chip_irq = irq; @@ -168,6 +168,8 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) return ret; } + da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq); + ret = mfd_add_devices(da9063->dev, -1, da9063_devs, ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base, NULL); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 193cf168ba84..a8204730f01c 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3150,23 +3150,28 @@ static int db8500_prcmu_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu"); if (!res) { dev_err(&pdev->dev, "no prcmu memory region provided\n"); - return -ENOENT; + return -EINVAL; } prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!prcmu_base) { dev_err(&pdev->dev, "failed to ioremap prcmu register memory\n"); - return -ENOENT; + return -ENOMEM; } init_prcm_registers(); dbx500_fw_version_init(pdev, pdata->version_offset); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); - return -ENOENT; + return -EINVAL; } tcdm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!tcdm_base) { + dev_err(&pdev->dev, + "failed to ioremap prcmu-tcdm register memory\n"); + return -ENOMEM; + } /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); @@ -3174,15 +3179,14 @@ static int db8500_prcmu_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "no prcmu irq provided\n"); - return -ENOENT; + return irq; } err = request_threaded_irq(irq, prcmu_irq_handler, prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); if (err < 0) { pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); - err = -EBUSY; - goto no_irq_return; + return err; } db8500_irq_init(np); @@ -3206,7 +3210,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add subdevices\n"); - goto no_irq_return; + return err; } } @@ -3214,12 +3218,10 @@ static int db8500_prcmu_probe(struct platform_device *pdev) if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add ab8500 subdevice\n"); - goto no_irq_return; + return err; } pr_info("DB8500 PRCMU initialized\n"); - -no_irq_return: return err; } static const struct of_device_id db8500_prcmu_match[] = { diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c new file mode 100644 index 000000000000..6d49685d4ee4 --- /dev/null +++ b/drivers/mfd/dln2.c @@ -0,0 +1,781 @@ +/* + * Driver for the Diolan DLN-2 USB adapter + * + * Copyright (c) 2014 Intel Corporation + * + * Derived from: + * i2c-diolan-u2c.c + * Copyright (c) 2010-2011 Ericsson AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/dln2.h> +#include <linux/rculist.h> + +struct dln2_header { + __le16 size; + __le16 id; + __le16 echo; + __le16 handle; +}; + +struct dln2_response { + struct dln2_header hdr; + __le16 result; +}; + +#define DLN2_GENERIC_MODULE_ID 0x00 +#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID) +#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30) +#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31) + +#define DLN2_HW_ID 0x200 +#define DLN2_USB_TIMEOUT 200 /* in ms */ +#define DLN2_MAX_RX_SLOTS 16 +#define DLN2_MAX_URBS 16 +#define DLN2_RX_BUF_SIZE 512 + +enum dln2_handle { + DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */ + DLN2_HANDLE_CTRL, + DLN2_HANDLE_GPIO, + DLN2_HANDLE_I2C, + DLN2_HANDLE_SPI, + DLN2_HANDLES +}; + +/* + * Receive context used between the receive demultiplexer and the transfer + * routine. While sending a request the transfer routine will look for a free + * receive context and use it to wait for a response and to receive the URB and + * thus the response data. + */ +struct dln2_rx_context { + /* completion used to wait for a response */ + struct completion done; + + /* if non-NULL the URB contains the response */ + struct urb *urb; + + /* if true then this context is used to wait for a response */ + bool in_use; +}; + +/* + * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the + * handle header field to identify the module in dln2_dev.mod_rx_slots and then + * the echo header field to index the slots field and find the receive context + * for a particular request. + */ +struct dln2_mod_rx_slots { + /* RX slots bitmap */ + DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS); + + /* used to wait for a free RX slot */ + wait_queue_head_t wq; + + /* used to wait for an RX operation to complete */ + struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS]; + + /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */ + spinlock_t lock; +}; + +struct dln2_dev { + struct usb_device *usb_dev; + struct usb_interface *interface; + u8 ep_in; + u8 ep_out; + + struct urb *rx_urb[DLN2_MAX_URBS]; + void *rx_buf[DLN2_MAX_URBS]; + + struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES]; + + struct list_head event_cb_list; + spinlock_t event_cb_lock; + + bool disconnect; + int active_transfers; + wait_queue_head_t disconnect_wq; + spinlock_t disconnect_lock; +}; + +struct dln2_event_cb_entry { + struct list_head list; + u16 id; + struct platform_device *pdev; + dln2_event_cb_t callback; +}; + +int dln2_register_event_cb(struct platform_device *pdev, u16 id, + dln2_event_cb_t event_cb) +{ + struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); + struct dln2_event_cb_entry *i, *entry; + unsigned long flags; + int ret = 0; + + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + entry->id = id; + entry->callback = event_cb; + entry->pdev = pdev; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); + + list_for_each_entry(i, &dln2->event_cb_list, list) { + if (i->id == id) { + ret = -EBUSY; + break; + } + } + + if (!ret) + list_add_rcu(&entry->list, &dln2->event_cb_list); + + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); + + if (ret) + kfree(entry); + + return ret; +} +EXPORT_SYMBOL(dln2_register_event_cb); + +void dln2_unregister_event_cb(struct platform_device *pdev, u16 id) +{ + struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); + struct dln2_event_cb_entry *i; + unsigned long flags; + bool found = false; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); + + list_for_each_entry(i, &dln2->event_cb_list, list) { + if (i->id == id) { + list_del_rcu(&i->list); + found = true; + break; + } + } + + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); + + if (found) { + synchronize_rcu(); + kfree(i); + } +} +EXPORT_SYMBOL(dln2_unregister_event_cb); + +/* + * Returns true if a valid transfer slot is found. In this case the URB must not + * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer + * is woke up. It will be resubmitted there. + */ +static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb, + u16 handle, u16 rx_slot) +{ + struct device *dev = &dln2->interface->dev; + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; + struct dln2_rx_context *rxc; + bool valid_slot = false; + + if (rx_slot >= DLN2_MAX_RX_SLOTS) + goto out; + + rxc = &rxs->slots[rx_slot]; + + /* + * No need to disable interrupts as this lock is not taken in interrupt + * context elsewhere in this driver. This function (or its callers) are + * also not exported to other modules. + */ + spin_lock(&rxs->lock); + if (rxc->in_use && !rxc->urb) { + rxc->urb = urb; + complete(&rxc->done); + valid_slot = true; + } + spin_unlock(&rxs->lock); + +out: + if (!valid_slot) + dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot); + + return valid_slot; +} + +static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo, + void *data, int len) +{ + struct dln2_event_cb_entry *i; + + rcu_read_lock(); + + list_for_each_entry_rcu(i, &dln2->event_cb_list, list) { + if (i->id == id) { + i->callback(i->pdev, echo, data, len); + break; + } + } + + rcu_read_unlock(); +} + +static void dln2_rx(struct urb *urb) +{ + struct dln2_dev *dln2 = urb->context; + struct dln2_header *hdr = urb->transfer_buffer; + struct device *dev = &dln2->interface->dev; + u16 id, echo, handle, size; + u8 *data; + int len; + int err; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -EPIPE: + /* this urb is terminated, clean up */ + dev_dbg(dev, "urb shutting down with status %d\n", urb->status); + return; + default: + dev_dbg(dev, "nonzero urb status received %d\n", urb->status); + goto out; + } + + if (urb->actual_length < sizeof(struct dln2_header)) { + dev_err(dev, "short response: %d\n", urb->actual_length); + goto out; + } + + handle = le16_to_cpu(hdr->handle); + id = le16_to_cpu(hdr->id); + echo = le16_to_cpu(hdr->echo); + size = le16_to_cpu(hdr->size); + + if (size != urb->actual_length) { + dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n", + handle, id, echo, size, urb->actual_length); + goto out; + } + + if (handle >= DLN2_HANDLES) { + dev_warn(dev, "invalid handle %d\n", handle); + goto out; + } + + data = urb->transfer_buffer + sizeof(struct dln2_header); + len = urb->actual_length - sizeof(struct dln2_header); + + if (handle == DLN2_HANDLE_EVENT) { + dln2_run_event_callbacks(dln2, id, echo, data, len); + } else { + /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */ + if (dln2_transfer_complete(dln2, urb, handle, echo)) + return; + } + +out: + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) + dev_err(dev, "failed to resubmit RX URB: %d\n", err); +} + +static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf, + int *obuf_len, gfp_t gfp) +{ + int len; + void *buf; + struct dln2_header *hdr; + + len = *obuf_len + sizeof(*hdr); + buf = kmalloc(len, gfp); + if (!buf) + return NULL; + + hdr = (struct dln2_header *)buf; + hdr->id = cpu_to_le16(cmd); + hdr->size = cpu_to_le16(len); + hdr->echo = cpu_to_le16(echo); + hdr->handle = cpu_to_le16(handle); + + memcpy(buf + sizeof(*hdr), obuf, *obuf_len); + + *obuf_len = len; + + return buf; +} + +static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo, + const void *obuf, int obuf_len) +{ + int ret = 0; + int len = obuf_len; + void *buf; + int actual; + + buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_bulk_msg(dln2->usb_dev, + usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out), + buf, len, &actual, DLN2_USB_TIMEOUT); + + kfree(buf); + + return ret; +} + +static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot) +{ + struct dln2_mod_rx_slots *rxs; + unsigned long flags; + + if (dln2->disconnect) { + *slot = -ENODEV; + return true; + } + + rxs = &dln2->mod_rx_slots[handle]; + + spin_lock_irqsave(&rxs->lock, flags); + + *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS); + + if (*slot < DLN2_MAX_RX_SLOTS) { + struct dln2_rx_context *rxc = &rxs->slots[*slot]; + + set_bit(*slot, rxs->bmap); + rxc->in_use = true; + } + + spin_unlock_irqrestore(&rxs->lock, flags); + + return *slot < DLN2_MAX_RX_SLOTS; +} + +static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle) +{ + int ret; + int slot; + + /* + * No need to timeout here, the wait is bounded by the timeout in + * _dln2_transfer. + */ + ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq, + find_free_slot(dln2, handle, &slot)); + if (ret < 0) + return ret; + + return slot; +} + +static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot) +{ + struct dln2_mod_rx_slots *rxs; + struct urb *urb = NULL; + unsigned long flags; + struct dln2_rx_context *rxc; + + rxs = &dln2->mod_rx_slots[handle]; + + spin_lock_irqsave(&rxs->lock, flags); + + clear_bit(slot, rxs->bmap); + + rxc = &rxs->slots[slot]; + rxc->in_use = false; + urb = rxc->urb; + rxc->urb = NULL; + reinit_completion(&rxc->done); + + spin_unlock_irqrestore(&rxs->lock, flags); + + if (urb) { + int err; + struct device *dev = &dln2->interface->dev; + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) + dev_err(dev, "failed to resubmit RX URB: %d\n", err); + } + + wake_up_interruptible(&rxs->wq); +} + +static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len) +{ + int ret = 0; + int rx_slot; + struct dln2_response *rsp; + struct dln2_rx_context *rxc; + struct device *dev = &dln2->interface->dev; + const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000; + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; + int size; + + spin_lock(&dln2->disconnect_lock); + if (!dln2->disconnect) + dln2->active_transfers++; + else + ret = -ENODEV; + spin_unlock(&dln2->disconnect_lock); + + if (ret) + return ret; + + rx_slot = alloc_rx_slot(dln2, handle); + if (rx_slot < 0) { + ret = rx_slot; + goto out_decr; + } + + ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len); + if (ret < 0) { + dev_err(dev, "USB write failed: %d\n", ret); + goto out_free_rx_slot; + } + + rxc = &rxs->slots[rx_slot]; + + ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout); + if (ret <= 0) { + if (!ret) + ret = -ETIMEDOUT; + goto out_free_rx_slot; + } else { + ret = 0; + } + + if (dln2->disconnect) { + ret = -ENODEV; + goto out_free_rx_slot; + } + + /* if we got here we know that the response header has been checked */ + rsp = rxc->urb->transfer_buffer; + size = le16_to_cpu(rsp->hdr.size); + + if (size < sizeof(*rsp)) { + ret = -EPROTO; + goto out_free_rx_slot; + } + + if (le16_to_cpu(rsp->result) > 0x80) { + dev_dbg(dev, "%d received response with error %d\n", + handle, le16_to_cpu(rsp->result)); + ret = -EREMOTEIO; + goto out_free_rx_slot; + } + + if (!ibuf) + goto out_free_rx_slot; + + if (*ibuf_len > size - sizeof(*rsp)) + *ibuf_len = size - sizeof(*rsp); + + memcpy(ibuf, rsp + 1, *ibuf_len); + +out_free_rx_slot: + free_rx_slot(dln2, handle, rx_slot); +out_decr: + spin_lock(&dln2->disconnect_lock); + dln2->active_transfers--; + spin_unlock(&dln2->disconnect_lock); + if (dln2->disconnect) + wake_up(&dln2->disconnect_wq); + + return ret; +} + +int dln2_transfer(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len) +{ + struct dln2_platform_data *dln2_pdata; + struct dln2_dev *dln2; + u16 handle; + + dln2 = dev_get_drvdata(pdev->dev.parent); + dln2_pdata = dev_get_platdata(&pdev->dev); + handle = dln2_pdata->handle; + + return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf, + ibuf_len); +} +EXPORT_SYMBOL(dln2_transfer); + +static int dln2_check_hw(struct dln2_dev *dln2) +{ + int ret; + __le32 hw_type; + int len = sizeof(hw_type); + + ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER, + NULL, 0, &hw_type, &len); + if (ret < 0) + return ret; + if (len < sizeof(hw_type)) + return -EREMOTEIO; + + if (le32_to_cpu(hw_type) != DLN2_HW_ID) { + dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n", + le32_to_cpu(hw_type)); + return -ENODEV; + } + + return 0; +} + +static int dln2_print_serialno(struct dln2_dev *dln2) +{ + int ret; + __le32 serial_no; + int len = sizeof(serial_no); + struct device *dev = &dln2->interface->dev; + + ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0, + &serial_no, &len); + if (ret < 0) + return ret; + if (len < sizeof(serial_no)) + return -EREMOTEIO; + + dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no)); + + return 0; +} + +static int dln2_hw_init(struct dln2_dev *dln2) +{ + int ret; + + ret = dln2_check_hw(dln2); + if (ret < 0) + return ret; + + return dln2_print_serialno(dln2); +} + +static void dln2_free_rx_urbs(struct dln2_dev *dln2) +{ + int i; + + for (i = 0; i < DLN2_MAX_URBS; i++) { + usb_kill_urb(dln2->rx_urb[i]); + usb_free_urb(dln2->rx_urb[i]); + kfree(dln2->rx_buf[i]); + } +} + +static void dln2_free(struct dln2_dev *dln2) +{ + dln2_free_rx_urbs(dln2); + usb_put_dev(dln2->usb_dev); + kfree(dln2); +} + +static int dln2_setup_rx_urbs(struct dln2_dev *dln2, + struct usb_host_interface *hostif) +{ + int i; + int ret; + const int rx_max_size = DLN2_RX_BUF_SIZE; + struct device *dev = &dln2->interface->dev; + + for (i = 0; i < DLN2_MAX_URBS; i++) { + dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL); + if (!dln2->rx_buf[i]) + return -ENOMEM; + + dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!dln2->rx_urb[i]) + return -ENOMEM; + + usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev, + usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in), + dln2->rx_buf[i], rx_max_size, dln2_rx, dln2); + + ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL); + if (ret < 0) { + dev_err(dev, "failed to submit RX URB: %d\n", ret); + return ret; + } + } + + return 0; +} + +static struct dln2_platform_data dln2_pdata_gpio = { + .handle = DLN2_HANDLE_GPIO, +}; + +/* Only one I2C port seems to be supported on current hardware */ +static struct dln2_platform_data dln2_pdata_i2c = { + .handle = DLN2_HANDLE_I2C, + .port = 0, +}; + +/* Only one SPI port supported */ +static struct dln2_platform_data dln2_pdata_spi = { + .handle = DLN2_HANDLE_SPI, + .port = 0, +}; + +static const struct mfd_cell dln2_devs[] = { + { + .name = "dln2-gpio", + .platform_data = &dln2_pdata_gpio, + .pdata_size = sizeof(struct dln2_platform_data), + }, + { + .name = "dln2-i2c", + .platform_data = &dln2_pdata_i2c, + .pdata_size = sizeof(struct dln2_platform_data), + }, + { + .name = "dln2-spi", + .platform_data = &dln2_pdata_spi, + .pdata_size = sizeof(struct dln2_platform_data), + }, +}; + +static void dln2_disconnect(struct usb_interface *interface) +{ + struct dln2_dev *dln2 = usb_get_intfdata(interface); + int i, j; + + /* don't allow starting new transfers */ + spin_lock(&dln2->disconnect_lock); + dln2->disconnect = true; + spin_unlock(&dln2->disconnect_lock); + + /* cancel in progress transfers */ + for (i = 0; i < DLN2_HANDLES; i++) { + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i]; + unsigned long flags; + + spin_lock_irqsave(&rxs->lock, flags); + + /* cancel all response waiters */ + for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) { + struct dln2_rx_context *rxc = &rxs->slots[j]; + + if (rxc->in_use) + complete(&rxc->done); + } + + spin_unlock_irqrestore(&rxs->lock, flags); + } + + /* wait for transfers to end */ + wait_event(dln2->disconnect_wq, !dln2->active_transfers); + + mfd_remove_devices(&interface->dev); + + dln2_free(dln2); +} + +static int dln2_probe(struct usb_interface *interface, + const struct usb_device_id *usb_id) +{ + struct usb_host_interface *hostif = interface->cur_altsetting; + struct device *dev = &interface->dev; + struct dln2_dev *dln2; + int ret; + int i, j; + + if (hostif->desc.bInterfaceNumber != 0 || + hostif->desc.bNumEndpoints < 2) + return -ENODEV; + + dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress; + dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress; + dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dln2->interface = interface; + usb_set_intfdata(interface, dln2); + init_waitqueue_head(&dln2->disconnect_wq); + + for (i = 0; i < DLN2_HANDLES; i++) { + init_waitqueue_head(&dln2->mod_rx_slots[i].wq); + spin_lock_init(&dln2->mod_rx_slots[i].lock); + for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) + init_completion(&dln2->mod_rx_slots[i].slots[j].done); + } + + spin_lock_init(&dln2->event_cb_lock); + spin_lock_init(&dln2->disconnect_lock); + INIT_LIST_HEAD(&dln2->event_cb_list); + + ret = dln2_setup_rx_urbs(dln2, hostif); + if (ret) + goto out_cleanup; + + ret = dln2_hw_init(dln2); + if (ret < 0) { + dev_err(dev, "failed to initialize hardware\n"); + goto out_cleanup; + } + + ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs)); + if (ret != 0) { + dev_err(dev, "failed to add mfd devices to core\n"); + goto out_cleanup; + } + + return 0; + +out_cleanup: + dln2_free(dln2); + + return ret; +} + +static const struct usb_device_id dln2_table[] = { + { USB_DEVICE(0xa257, 0x2013) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, dln2_table); + +static struct usb_driver dln2_driver = { + .name = "dln2", + .probe = dln2_probe, + .disconnect = dln2_disconnect, + .id_table = dln2_table, +}; + +module_usb_driver(dln2_driver); + +MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>"); +MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index c980da479a35..5c38df35a84d 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -193,11 +193,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); - if (ret) - mfd_remove_devices(&dev->dev); - - return ret; + return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); } static void lpc_sch_remove(struct pci_dev *dev) diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index de96b7fb1f6d..3bf8def82f1e 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -1,7 +1,7 @@ /* * max14577.c - mfd core driver for the Maxim 14577/77836 * - * Copyright (C) 2014 Samsung Electrnoics + * Copyright (C) 2014 Samsung Electronics * Chanwoo Choi <cw00.choi@samsung.com> * Krzysztof Kozlowski <k.kozlowski@samsung.com> * diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 711773e8e64b..a159593e27a0 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -43,9 +43,15 @@ static const struct mfd_cell max77693_devs[] = { { .name = "max77693-pmic", }, - { .name = "max77693-charger", }, + { + .name = "max77693-charger", + .of_compatible = "maxim,max77693-charger", + }, { .name = "max77693-muic", }, - { .name = "max77693-haptic", }, + { + .name = "max77693-haptic", + .of_compatible = "maxim,max77693-haptic", + }, { .name = "max77693-flash", .of_compatible = "maxim,max77693-flash", @@ -147,6 +153,12 @@ static const struct regmap_irq_chip max77693_muic_irq_chip = { .num_irqs = ARRAY_SIZE(max77693_muic_irqs), }; +static const struct regmap_config max77693_regmap_haptic_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77693_HAPTIC_REG_END, +}; + static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -196,6 +208,15 @@ static int max77693_i2c_probe(struct i2c_client *i2c, } i2c_set_clientdata(max77693->haptic, max77693); + max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic, + &max77693_regmap_haptic_config); + if (IS_ERR(max77693->regmap_haptic)) { + ret = PTR_ERR(max77693->regmap_haptic); + dev_err(max77693->dev, + "failed to initialize haptic register map: %d\n", ret); + goto err_regmap; + } + /* * Initialize register map for MUIC device because use regmap-muic * instance of MUIC device when irq of max77693 is initialized @@ -207,7 +228,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(max77693->regmap_muic); dev_err(max77693->dev, "failed to allocate register map: %d\n", ret); - goto err_regmap_muic; + goto err_regmap; } ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, @@ -217,7 +238,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, &max77693->irq_data_led); if (ret) { dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); - goto err_regmap_muic; + goto err_regmap; } ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, @@ -280,7 +301,7 @@ err_irq_charger: regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); err_irq_topsys: regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); -err_regmap_muic: +err_regmap: i2c_unregister_device(max77693->haptic); err_i2c_haptic: i2c_unregister_device(max77693->muic); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index f3338fe9d069..2a87f69be53d 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -125,9 +125,15 @@ static int mfd_add_device(struct device *parent, int id, struct platform_device *pdev; struct device_node *np = NULL; int ret = -ENOMEM; + int platform_id; int r; - pdev = platform_device_alloc(cell->name, id + cell->id); + if (id < 0) + platform_id = id; + else + platform_id = id + cell->id; + + pdev = platform_device_alloc(cell->name, platform_id); if (!pdev) goto fail_alloc; diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c index 9c8eec80ceed..32407404d838 100644 --- a/drivers/mfd/rts5227.c +++ b/drivers/mfd/rts5227.c @@ -130,6 +130,12 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) static int rts5227_optimize_phy(struct rtsx_pcr *pcr) { + int err; + + err = rtsx_gops_pm_reset(pcr); + if (err < 0) + return err; + /* Optimize RX sensitivity */ return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); } diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c index 573de7bfcced..cf425cc959d5 100644 --- a/drivers/mfd/rts5249.c +++ b/drivers/mfd/rts5249.c @@ -130,6 +130,10 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr) { int err; + err = rtsx_gops_pm_reset(pcr); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED | PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN | diff --git a/drivers/mfd/rtsx_gops.c b/drivers/mfd/rtsx_gops.c new file mode 100644 index 000000000000..b1a98c678593 --- /dev/null +++ b/drivers/mfd/rtsx_gops.c @@ -0,0 +1,37 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Micky Ching <micky_ching@realsil.com.cn> + */ + +#include <linux/mfd/rtsx_pci.h> +#include "rtsx_pcr.h" + +int rtsx_gops_pm_reset(struct rtsx_pcr *pcr) +{ + int err; + + /* init aspm */ + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00); + err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00); + if (err < 0) + return err; + + /* reset PM_CTRL3 before send buffer cmd */ + return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00); +} diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h index 07e4c2ebf05a..fe2bbb67defc 100644 --- a/drivers/mfd/rtsx_pcr.h +++ b/drivers/mfd/rtsx_pcr.h @@ -72,4 +72,7 @@ do { \ pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \ } while (0) +/* generic operations */ +int rtsx_gops_pm_reset(struct rtsx_pcr *pcr); + #endif diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c index 9cf98d142d9a..dbdd0faeb6ce 100644 --- a/drivers/mfd/rtsx_usb.c +++ b/drivers/mfd/rtsx_usb.c @@ -647,8 +647,8 @@ static int rtsx_usb_probe(struct usb_interface *intf, /* initialize USB SG transfer timer */ setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr); - ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells, - ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL); + ret = mfd_add_hotplug_devices(&intf->dev, rtsx_usb_cells, + ARRAY_SIZE(rtsx_usb_cells)); if (ret) goto out_init_fail; diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index dba7e2b6f8e9..0a7bc43db4e4 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -27,11 +27,11 @@ #include <linux/mfd/samsung/irq.h> #include <linux/mfd/samsung/s2mpa01.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s2mpu02.h> #include <linux/mfd/samsung/s5m8763.h> #include <linux/mfd/samsung/s5m8767.h> -#include <linux/regulator/machine.h> #include <linux/regmap.h> static const struct mfd_cell s5m8751_devs[] = { @@ -74,6 +74,15 @@ static const struct mfd_cell s2mps11_devs[] = { } }; +static const struct mfd_cell s2mps13_devs[] = { + { .name = "s2mps13-pmic", }, + { .name = "s2mps13-rtc", }, + { + .name = "s2mps13-clk", + .of_compatible = "samsung,s2mps13-clk", + }, +}; + static const struct mfd_cell s2mps14_devs[] = { { .name = "s2mps14-pmic", @@ -108,6 +117,9 @@ static const struct of_device_id sec_dt_match[] = { .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, }, { + .compatible = "samsung,s2mps13-pmic", + .data = (void *)S2MPS13X, + }, { .compatible = "samsung,s2mps14-pmic", .data = (void *)S2MPS14X, }, { @@ -194,6 +206,15 @@ static const struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps13_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS13_REG_LDODSCH5, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mps14_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -325,6 +346,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, case S2MPS11X: regmap = &s2mps11_regmap_config; break; + case S2MPS13X: + regmap = &s2mps13_regmap_config; + break; case S2MPS14X: regmap = &s2mps14_regmap_config; break; @@ -378,6 +402,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_devs = s2mps11_devs; num_sec_devs = ARRAY_SIZE(s2mps11_devs); break; + case S2MPS13X: + sec_devs = s2mps13_devs; + num_sec_devs = ARRAY_SIZE(s2mps13_devs); + break; case S2MPS14X: sec_devs = s2mps14_devs; num_sec_devs = ARRAY_SIZE(s2mps14_devs); @@ -432,15 +460,6 @@ static int sec_pmic_suspend(struct device *dev) */ disable_irq(sec_pmic->irq); - switch (sec_pmic->device_type) { - case S2MPS14X: - case S2MPU02: - regulator_suspend_prepare(PM_SUSPEND_MEM); - break; - default: - break; - } - return 0; } diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index f9a57869e3ec..ba86a918c2da 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -389,14 +389,22 @@ static const struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; +#define S2MPS1X_IRQ_CHIP_COMMON_DATA \ + .irqs = s2mps14_irqs, \ + .num_irqs = ARRAY_SIZE(s2mps14_irqs), \ + .num_regs = 3, \ + .status_base = S2MPS14_REG_INT1, \ + .mask_base = S2MPS14_REG_INT1M, \ + .ack_base = S2MPS14_REG_INT1 \ + +static const struct regmap_irq_chip s2mps13_irq_chip = { + .name = "s2mps13", + S2MPS1X_IRQ_CHIP_COMMON_DATA, +}; + static const struct regmap_irq_chip s2mps14_irq_chip = { .name = "s2mps14", - .irqs = s2mps14_irqs, - .num_irqs = ARRAY_SIZE(s2mps14_irqs), - .num_regs = 3, - .status_base = S2MPS14_REG_INT1, - .mask_base = S2MPS14_REG_INT1M, - .ack_base = S2MPS14_REG_INT1, + S2MPS1X_IRQ_CHIP_COMMON_DATA, }; static const struct regmap_irq_chip s2mpu02_irq_chip = { @@ -452,6 +460,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) case S2MPS11X: sec_irq_chip = &s2mps11_irq_chip; break; + case S2MPS13X: + sec_irq_chip = &s2mps13_irq_chip; + break; case S2MPS14X: sec_irq_chip = &s2mps14_irq_chip; break; diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index ca15878ce5c0..72373b113885 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -15,6 +15,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/list.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> @@ -22,31 +23,94 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/slab.h> static struct platform_driver syscon_driver; +static DEFINE_SPINLOCK(syscon_list_slock); +static LIST_HEAD(syscon_list); + struct syscon { + struct device_node *np; struct regmap *regmap; + struct list_head list; +}; + +static struct regmap_config syscon_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, }; -static int syscon_match_node(struct device *dev, void *data) +static struct syscon *of_syscon_register(struct device_node *np) { - struct device_node *dn = data; + struct syscon *syscon; + struct regmap *regmap; + void __iomem *base; + int ret; + struct regmap_config syscon_config = syscon_regmap_config; + + if (!of_device_is_compatible(np, "syscon")) + return ERR_PTR(-EINVAL); + + syscon = kzalloc(sizeof(*syscon), GFP_KERNEL); + if (!syscon) + return ERR_PTR(-ENOMEM); + + base = of_iomap(np, 0); + if (!base) { + ret = -ENOMEM; + goto err_map; + } + + /* Parse the device's DT node for an endianness specification */ + if (of_property_read_bool(np, "big-endian")) + syscon_config.val_format_endian = REGMAP_ENDIAN_BIG; + else if (of_property_read_bool(np, "little-endian")) + syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE; + + regmap = regmap_init_mmio(NULL, base, &syscon_config); + if (IS_ERR(regmap)) { + pr_err("regmap init failed\n"); + ret = PTR_ERR(regmap); + goto err_regmap; + } + + syscon->regmap = regmap; + syscon->np = np; + + spin_lock(&syscon_list_slock); + list_add_tail(&syscon->list, &syscon_list); + spin_unlock(&syscon_list_slock); - return (dev->of_node == dn) ? 1 : 0; + return syscon; + +err_regmap: + iounmap(base); +err_map: + kfree(syscon); + return ERR_PTR(ret); } struct regmap *syscon_node_to_regmap(struct device_node *np) { - struct syscon *syscon; - struct device *dev; + struct syscon *entry, *syscon = NULL; - dev = driver_find_device(&syscon_driver.driver, NULL, np, - syscon_match_node); - if (!dev) - return ERR_PTR(-EPROBE_DEFER); + spin_lock(&syscon_list_slock); - syscon = dev_get_drvdata(dev); + list_for_each_entry(entry, &syscon_list, list) + if (entry->np == np) { + syscon = entry; + break; + } + + spin_unlock(&syscon_list_slock); + + if (!syscon) + syscon = of_syscon_register(np); + + if (IS_ERR(syscon)) + return ERR_CAST(syscon); return syscon->regmap; } @@ -110,17 +174,6 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, } EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle); -static const struct of_device_id of_syscon_match[] = { - { .compatible = "syscon", }, - { }, -}; - -static struct regmap_config syscon_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int syscon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -167,7 +220,6 @@ static struct platform_driver syscon_driver = { .driver = { .name = "syscon", .owner = THIS_MODULE, - .of_match_table = of_syscon_match, }, .probe = syscon_probe, .id_table = syscon_ids, diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 9e04a7485981..439d905bb219 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -87,7 +87,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) unsigned long flags; u8 dev_ctl; - clk_enable(t7l66xb->clk32k); + clk_prepare_enable(t7l66xb->clk32k); spin_lock_irqsave(&t7l66xb->lock, flags); @@ -118,7 +118,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) spin_unlock_irqrestore(&t7l66xb->lock, flags); - clk_disable(t7l66xb->clk32k); + clk_disable_unprepare(t7l66xb->clk32k); return 0; } @@ -285,7 +285,7 @@ static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state) if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(t7l66xb->clk48m); + clk_disable_unprepare(t7l66xb->clk48m); return 0; } @@ -295,7 +295,7 @@ static int t7l66xb_resume(struct platform_device *dev) struct t7l66xb *t7l66xb = platform_get_drvdata(dev); struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev); - clk_enable(t7l66xb->clk48m); + clk_prepare_enable(t7l66xb->clk48m); if (pdata && pdata->resume) pdata->resume(dev); @@ -369,7 +369,7 @@ static int t7l66xb_probe(struct platform_device *dev) goto err_ioremap; } - clk_enable(t7l66xb->clk48m); + clk_prepare_enable(t7l66xb->clk48m); if (pdata && pdata->enable) pdata->enable(dev); @@ -414,9 +414,9 @@ static int t7l66xb_remove(struct platform_device *dev) int ret; ret = pdata->disable(dev); - clk_disable(t7l66xb->clk48m); + clk_disable_unprepare(t7l66xb->clk48m); clk_put(t7l66xb->clk48m); - clk_disable(t7l66xb->clk32k); + clk_disable_unprepare(t7l66xb->clk32k); clk_put(t7l66xb->clk32k); t7l66xb_detach_irq(dev); iounmap(t7l66xb->scr); diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 0072e668c208..aacb3720065c 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -241,10 +241,8 @@ static struct irq_domain_ops tc3589x_irq_ops = { static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np) { - int base = tc3589x->irq_base; - tc3589x->domain = irq_domain_add_simple( - np, TC3589x_NR_INTERNAL_IRQS, base, + np, TC3589x_NR_INTERNAL_IRQS, 0, &tc3589x_irq_ops, tc3589x); if (!tc3589x->domain) { @@ -298,7 +296,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_GPIO) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, ARRAY_SIZE(tc3589x_dev_gpio), NULL, - tc3589x->irq_base, tc3589x->domain); + 0, tc3589x->domain); if (ret) { dev_err(tc3589x->dev, "failed to add gpio child\n"); return ret; @@ -309,7 +307,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_KEYPAD) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, ARRAY_SIZE(tc3589x_dev_keypad), NULL, - tc3589x->irq_base, tc3589x->domain); + 0, tc3589x->domain); if (ret) { dev_err(tc3589x->dev, "failed to keypad child\n"); return ret; @@ -404,7 +402,6 @@ static int tc3589x_probe(struct i2c_client *i2c, tc3589x->dev = &i2c->dev; tc3589x->i2c = i2c; tc3589x->pdata = pdata; - tc3589x->irq_base = pdata->irq_base; switch (version) { case TC3589X_TC35893: diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index e71f88000ae5..85fab3729102 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -52,7 +52,7 @@ static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); return 0; } @@ -62,7 +62,7 @@ static int tc6387xb_resume(struct platform_device *dev) struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev_get_platdata(&dev->dev); - clk_enable(tc6387xb->clk32k); + clk_prepare_enable(tc6387xb->clk32k); if (pdata && pdata->resume) pdata->resume(dev); @@ -100,7 +100,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) struct platform_device *dev = to_platform_device(mmc->dev.parent); struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_enable(tc6387xb->clk32k); + clk_prepare_enable(tc6387xb->clk32k); tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0, tc6387xb_mmc_resources[0].start & 0xfffe); @@ -113,7 +113,7 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc) struct platform_device *dev = to_platform_device(mmc->dev.parent); struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); return 0; } @@ -214,7 +214,7 @@ static int tc6387xb_remove(struct platform_device *dev) mfd_remove_devices(&dev->dev); iounmap(tc6387xb->scr); release_resource(&tc6387xb->rscr); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); clk_put(tc6387xb->clk32k); kfree(tc6387xb); diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 4fac16bcd732..d35f11fbeab7 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -263,6 +263,17 @@ static int tc6393xb_ohci_disable(struct platform_device *dev) return 0; } +static int tc6393xb_ohci_suspend(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent); + + /* We can't properly store/restore OHCI state, so fail here */ + if (tcpd->resume_restore) + return -EBUSY; + + return tc6393xb_ohci_disable(dev); +} + static int tc6393xb_fb_enable(struct platform_device *dev) { struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); @@ -403,7 +414,7 @@ static struct mfd_cell tc6393xb_cells[] = { .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources), .resources = tc6393xb_ohci_resources, .enable = tc6393xb_ohci_enable, - .suspend = tc6393xb_ohci_disable, + .suspend = tc6393xb_ohci_suspend, .resume = tc6393xb_ohci_enable, .disable = tc6393xb_ohci_disable, }, @@ -654,7 +665,7 @@ static int tc6393xb_probe(struct platform_device *dev) goto err_ioremap; } - ret = clk_enable(tc6393xb->clk); + ret = clk_prepare_enable(tc6393xb->clk); if (ret) goto err_clk_enable; @@ -717,7 +728,7 @@ err_gpio_add: gpiochip_remove(&tc6393xb->gpio); tcpd->disable(dev); err_enable: - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); err_clk_enable: iounmap(tc6393xb->scr); err_ioremap: @@ -748,7 +759,7 @@ static int tc6393xb_remove(struct platform_device *dev) gpiochip_remove(&tc6393xb->gpio); ret = tcpd->disable(dev); - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); iounmap(tc6393xb->scr); release_resource(&tc6393xb->rscr); clk_put(tc6393xb->clk); @@ -776,7 +787,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) ioread8(tc6393xb->scr + SCR_GPI_BCR(i)); } ret = tcpd->suspend(dev); - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); return ret; } @@ -788,7 +799,7 @@ static int tc6393xb_resume(struct platform_device *dev) int ret; int i; - clk_enable(tc6393xb->clk); + clk_prepare_enable(tc6393xb->clk); ret = tcpd->resume(dev); if (ret) diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 1c3e6e2efe41..14b62e11aff4 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -76,58 +76,58 @@ static struct mfd_cell tps65090s[] = { static const struct regmap_irq tps65090_irqs[] = { /* INT1 IRQs*/ [TPS65090_IRQ_VAC_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE, }, [TPS65090_IRQ_VSYS_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE, }, [TPS65090_IRQ_BAT_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE, }, [TPS65090_IRQ_CHARGING_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE, }, [TPS65090_IRQ_CHARGING_COMPLETE] = { - .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE, + .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE, }, [TPS65090_IRQ_OVERLOAD_DCDC1] = { - .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1, + .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1, }, [TPS65090_IRQ_OVERLOAD_DCDC2] = { - .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2, + .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2, }, /* INT2 IRQs*/ [TPS65090_IRQ_OVERLOAD_DCDC3] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3, }, [TPS65090_IRQ_OVERLOAD_FET1] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET1, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET1, }, [TPS65090_IRQ_OVERLOAD_FET2] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET2, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET2, }, [TPS65090_IRQ_OVERLOAD_FET3] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET3, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET3, }, [TPS65090_IRQ_OVERLOAD_FET4] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET4, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET4, }, [TPS65090_IRQ_OVERLOAD_FET5] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET5, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET5, }, [TPS65090_IRQ_OVERLOAD_FET6] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET6, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET6, }, [TPS65090_IRQ_OVERLOAD_FET7] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET7, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET7, }, }; @@ -176,7 +176,7 @@ MODULE_DEVICE_TABLE(of, tps65090_of_match); #endif static int tps65090_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev); int irq_base = 0; @@ -210,11 +210,11 @@ static int tps65090_i2c_probe(struct i2c_client *client, if (client->irq) { ret = regmap_add_irq_chip(tps65090->rmap, client->irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base, - &tps65090_irq_chip, &tps65090->irq_data); - if (ret) { - dev_err(&client->dev, - "IRQ init failed with err: %d\n", ret); + IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base, + &tps65090_irq_chip, &tps65090->irq_data); + if (ret) { + dev_err(&client->dev, + "IRQ init failed with err: %d\n", ret); return ret; } } else { @@ -223,8 +223,8 @@ static int tps65090_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, - ARRAY_SIZE(tps65090s), NULL, - 0, regmap_irq_get_domain(tps65090->irq_data)); + ARRAY_SIZE(tps65090s), NULL, + 0, regmap_irq_get_domain(tps65090->irq_data)); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index a8ee52c95f2f..80a919a8ca97 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -33,9 +33,11 @@ static const struct mfd_cell tps65217s[] = { { .name = "tps65217-pmic", + .of_compatible = "ti,tps65217-pmic", }, { .name = "tps65217-bl", + .of_compatible = "ti,tps65217-bl", }, }; diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 50f9091bcd38..7d63e324e6a8 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -831,6 +831,9 @@ static struct twl4030_power_data osc_off_idle = { static struct of_device_id twl4030_power_of_match[] = { { + .compatible = "ti,twl4030-power", + }, + { .compatible = "ti,twl4030-power-reset", .data = &omap3_reset, }, diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c index 3c2b8f9e3c84..e6b3c70aeb22 100644 --- a/drivers/mfd/viperboard.c +++ b/drivers/mfd/viperboard.c @@ -93,9 +93,8 @@ static int vprbrd_probe(struct usb_interface *interface, version >> 8, version & 0xff, vb->usb_dev->bus->busnum, vb->usb_dev->devnum); - ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO, - vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0, - NULL); + ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs, + ARRAY_SIZE(vprbrd_devs)); if (ret != 0) { dev_err(&interface->dev, "Failed to add mfd devices to core."); goto error; diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index d6f35bbf795b..b326a82017ee 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -336,8 +336,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ - { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */ - { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */ { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */ @@ -1112,6 +1110,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -1949,6 +1949,8 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: case ARIZONA_DSP1_SCRATCH_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_HP_DACVAL: case ARIZONA_MIC_DETECT_3: diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 4642b5b816a0..12cad94b4035 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -895,8 +895,16 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */ { 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */ { 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */ + { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */ + { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */ + { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */ + { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */ { 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */ { 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */ + { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */ + { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */ + { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */ + { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */ { 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */ { 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */ { 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */ @@ -1790,6 +1798,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -1934,8 +1944,16 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_AIF2_FRAME_CTRL_2: case ARIZONA_AIF2_FRAME_CTRL_3: case ARIZONA_AIF2_FRAME_CTRL_4: + case ARIZONA_AIF2_FRAME_CTRL_5: + case ARIZONA_AIF2_FRAME_CTRL_6: + case ARIZONA_AIF2_FRAME_CTRL_7: + case ARIZONA_AIF2_FRAME_CTRL_8: case ARIZONA_AIF2_FRAME_CTRL_11: case ARIZONA_AIF2_FRAME_CTRL_12: + case ARIZONA_AIF2_FRAME_CTRL_13: + case ARIZONA_AIF2_FRAME_CTRL_14: + case ARIZONA_AIF2_FRAME_CTRL_15: + case ARIZONA_AIF2_FRAME_CTRL_16: case ARIZONA_AIF2_TX_ENABLES: case ARIZONA_AIF2_RX_ENABLES: case ARIZONA_AIF3_BCLK_CTRL: @@ -2825,6 +2843,8 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS: case ARIZONA_MIC_DETECT_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_INPUT_ENABLES_STATUS: case ARIZONA_OUTPUT_STATUS_1: diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 4ab527f5c53b..f5124a8acad8 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -308,7 +308,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, goto err; } - mode = id2 & WM8350_CONF_STS_MASK >> 10; + mode = (id2 & WM8350_CONF_STS_MASK) >> 10; cust_id = id2 & WM8350_CUST_ID_MASK; chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12; dev_info(wm8350->dev, diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c index 510da3b52324..c0c25d75aacc 100644 --- a/drivers/mfd/wm8997-tables.c +++ b/drivers/mfd/wm8997-tables.c @@ -670,6 +670,7 @@ static const struct reg_default wm8997_reg_default[] = { { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ { 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */ + { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */ { 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */ { 0x00000D0B, 0xFFFF }, /* R3339 - Interrupt Status 4 Mask */ { 0x00000D0C, 0xFEFF }, /* R3340 - Interrupt Status 5 Mask */ @@ -886,6 +887,8 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -1328,6 +1331,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_INTERRUPT_STATUS_4: case ARIZONA_INTERRUPT_STATUS_5: case ARIZONA_INTERRUPT_STATUS_1_MASK: + case ARIZONA_INTERRUPT_STATUS_2_MASK: case ARIZONA_INTERRUPT_STATUS_3_MASK: case ARIZONA_INTERRUPT_STATUS_4_MASK: case ARIZONA_INTERRUPT_STATUS_5_MASK: @@ -1477,6 +1481,8 @@ static bool wm8997_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_SAMPLE_RATE_3_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: case ARIZONA_MIC_DETECT_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_INPUT_ENABLES_STATUS: case ARIZONA_OUTPUT_STATUS_1: diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 55d7b7b0f2e0..5e061347be93 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -529,13 +529,13 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator" + tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output - regulator via I2C bus. The chip is comprised of high efficient Buck - converters including Dual-Phase Buck converter, Buck-Boost converter, - various LDOs. + This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage + output regulator via I2C bus. The chip is comprised of high efficient + Buck converters including Dual-Phase Buck converter, Buck-Boost + converter, various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index adab82d5279f..738dc7763d47 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -30,6 +30,7 @@ #include <linux/of_gpio.h> #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s2mpu02.h> @@ -45,10 +46,10 @@ struct s2mps11_info { enum sec_device_type dev_type; /* - * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode - * was enabled. + * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether + * the suspend mode was enabled. */ - unsigned long long s2mps14_suspend_state:35; + unsigned long long s2mps14_suspend_state:50; /* Array of size rdev_num with GPIO-s for external sleep control */ int *ext_control_gpio; @@ -369,12 +370,101 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV), }; +static struct regulator_ops s2mps14_reg_ops; + +#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \ + .name = "LDO"#num, \ + .id = S2MPS13_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \ + .name = "BUCK"#num, \ + .id = S2MPS13_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +static const struct regulator_desc s2mps13_regulators[] = { + regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10), +}; + static int s2mps14_regulator_enable(struct regulator_dev *rdev) { struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); unsigned int val; switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) val = S2MPS14_ENABLE_SUSPEND; @@ -406,6 +496,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) /* Below LDO should be always on or does not support suspend mode. */ switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: switch (rdev_id) { case S2MPS14_LDO3: @@ -831,6 +922,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); regulators = s2mps11_regulators; break; + case S2MPS13X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators); + regulators = s2mps13_regulators; + break; case S2MPS14X: s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); regulators = s2mps14_regulators; @@ -927,6 +1022,7 @@ out: static const struct platform_device_id s2mps11_pmic_id[] = { { "s2mps11-pmic", S2MPS11X}, + { "s2mps13-pmic", S2MPS13X}, { "s2mps14-pmic", S2MPS14X}, { "s2mpu02-pmic", S2MPU02}, { }, diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index adba89d9c660..689312745b2f 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -12,7 +12,6 @@ int ab8500_sysctrl_read(u16 reg, u8 *value); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); -void ab8500_restart(char mode, const char *cmd); #else diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index c0b075f6bc35..aacc10d7789c 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -125,6 +125,8 @@ #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 #define ARIZONA_MIC_BIAS_CTRL_3 0x21A +#define ARIZONA_HP_CTRL_1L 0x225 +#define ARIZONA_HP_CTRL_1R 0x226 #define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293 #define ARIZONA_HEADPHONE_DETECT_1 0x29B #define ARIZONA_HEADPHONE_DETECT_2 0x29C @@ -279,8 +281,16 @@ #define ARIZONA_AIF2_FRAME_CTRL_2 0x548 #define ARIZONA_AIF2_FRAME_CTRL_3 0x549 #define ARIZONA_AIF2_FRAME_CTRL_4 0x54A +#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B +#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C +#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D +#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E #define ARIZONA_AIF2_FRAME_CTRL_11 0x551 #define ARIZONA_AIF2_FRAME_CTRL_12 0x552 +#define ARIZONA_AIF2_FRAME_CTRL_13 0x553 +#define ARIZONA_AIF2_FRAME_CTRL_14 0x554 +#define ARIZONA_AIF2_FRAME_CTRL_15 0x555 +#define ARIZONA_AIF2_FRAME_CTRL_16 0x556 #define ARIZONA_AIF2_TX_ENABLES 0x559 #define ARIZONA_AIF2_RX_ENABLES 0x55A #define ARIZONA_AIF2_FORCE_WRITE 0x55B @@ -2245,6 +2255,46 @@ #define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */ /* + * R549 (0x225) - HP Ctrl 1L + */ +#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */ +#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */ +#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */ + +/* + * R550 (0x226) - HP Ctrl 1R + */ +#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */ +#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */ +#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */ + +/* * R659 (0x293) - Accessory Detect Mode 1 */ #define ARIZONA_ACCDET_SRC 0x2000 /* ACCDET_SRC */ diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h new file mode 100644 index 000000000000..1279ab1644b5 --- /dev/null +++ b/include/linux/mfd/atmel-hlcdc.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LINUX_MFD_HLCDC_H +#define __LINUX_MFD_HLCDC_H + +#include <linux/clk.h> +#include <linux/regmap.h> + +#define ATMEL_HLCDC_CFG(i) ((i) * 0x4) +#define ATMEL_HLCDC_SIG_CFG LCDCFG(5) +#define ATMEL_HLCDC_HSPOL BIT(0) +#define ATMEL_HLCDC_VSPOL BIT(1) +#define ATMEL_HLCDC_VSPDLYS BIT(2) +#define ATMEL_HLCDC_VSPDLYE BIT(3) +#define ATMEL_HLCDC_DISPPOL BIT(4) +#define ATMEL_HLCDC_DITHER BIT(6) +#define ATMEL_HLCDC_DISPDLY BIT(7) +#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8) +#define ATMEL_HLCDC_PP BIT(10) +#define ATMEL_HLCDC_VSPSU BIT(12) +#define ATMEL_HLCDC_VSPHO BIT(13) +#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16) + +#define ATMEL_HLCDC_EN 0x20 +#define ATMEL_HLCDC_DIS 0x24 +#define ATMEL_HLCDC_SR 0x28 +#define ATMEL_HLCDC_IER 0x2c +#define ATMEL_HLCDC_IDR 0x30 +#define ATMEL_HLCDC_IMR 0x34 +#define ATMEL_HLCDC_ISR 0x38 + +#define ATMEL_HLCDC_CLKPOL BIT(0) +#define ATMEL_HLCDC_CLKSEL BIT(2) +#define ATMEL_HLCDC_CLKPWMSEL BIT(3) +#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i)) +#define ATMEL_HLCDC_CLKDIV_SHFT 16 +#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16) +#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT) + +#define ATMEL_HLCDC_PIXEL_CLK BIT(0) +#define ATMEL_HLCDC_SYNC BIT(1) +#define ATMEL_HLCDC_DISP BIT(2) +#define ATMEL_HLCDC_PWM BIT(3) +#define ATMEL_HLCDC_SIP BIT(4) + +#define ATMEL_HLCDC_SOF BIT(0) +#define ATMEL_HLCDC_SYNCDIS BIT(1) +#define ATMEL_HLCDC_FIFOERR BIT(4) +#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8) + +/** + * Structure shared by the MFD device and its subdevices. + * + * @regmap: register map used to access HLCDC IP registers + * @periph_clk: the hlcdc peripheral clock + * @sys_clk: the hlcdc system clock + * @slow_clk: the system slow clk + * @irq: the hlcdc irq + */ +struct atmel_hlcdc { + struct regmap *regmap; + struct clk *periph_clk; + struct clk *sys_clk; + struct clk *slow_clk; + int irq; +}; + +#endif /* __LINUX_MFD_HLCDC_H */ diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index d0e31a2287ac..81589d176ae8 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,6 +14,8 @@ enum { AXP202_ID = 0, AXP209_ID, + AXP288_ID, + NR_AXP20X_VARIANTS, }; #define AXP20X_DATACACHE(m) (0x04 + (m)) @@ -49,11 +51,13 @@ enum { #define AXP20X_IRQ3_EN 0x42 #define AXP20X_IRQ4_EN 0x43 #define AXP20X_IRQ5_EN 0x44 +#define AXP20X_IRQ6_EN 0x45 #define AXP20X_IRQ1_STATE 0x48 #define AXP20X_IRQ2_STATE 0x49 #define AXP20X_IRQ3_STATE 0x4a #define AXP20X_IRQ4_STATE 0x4b #define AXP20X_IRQ5_STATE 0x4c +#define AXP20X_IRQ6_STATE 0x4d /* ADC */ #define AXP20X_ACIN_V_ADC_H 0x56 @@ -116,6 +120,15 @@ enum { #define AXP20X_CC_CTRL 0xb8 #define AXP20X_FG_RES 0xb9 +/* AXP288 specific registers */ +#define AXP288_PMIC_ADC_H 0x56 +#define AXP288_PMIC_ADC_L 0x57 +#define AXP288_ADC_TS_PIN_CTRL 0x84 + +#define AXP288_PMIC_ADC_EN 0x84 +#define AXP288_FG_TUNE5 0xed + + /* Regulators IDs */ enum { AXP20X_LDO1 = 0, @@ -169,12 +182,58 @@ enum { AXP20X_IRQ_GPIO0_INPUT, }; +enum axp288_irqs { + AXP288_IRQ_VBUS_FALL = 2, + AXP288_IRQ_VBUS_RISE, + AXP288_IRQ_OV, + AXP288_IRQ_FALLING_ALT, + AXP288_IRQ_RISING_ALT, + AXP288_IRQ_OV_ALT, + AXP288_IRQ_DONE = 10, + AXP288_IRQ_CHARGING, + AXP288_IRQ_SAFE_QUIT, + AXP288_IRQ_SAFE_ENTER, + AXP288_IRQ_ABSENT, + AXP288_IRQ_APPEND, + AXP288_IRQ_QWBTU, + AXP288_IRQ_WBTU, + AXP288_IRQ_QWBTO, + AXP288_IRQ_WBTO, + AXP288_IRQ_QCBTU, + AXP288_IRQ_CBTU, + AXP288_IRQ_QCBTO, + AXP288_IRQ_CBTO, + AXP288_IRQ_WL2, + AXP288_IRQ_WL1, + AXP288_IRQ_GPADC, + AXP288_IRQ_OT = 31, + AXP288_IRQ_GPIO0, + AXP288_IRQ_GPIO1, + AXP288_IRQ_POKO, + AXP288_IRQ_POKL, + AXP288_IRQ_POKS, + AXP288_IRQ_POKN, + AXP288_IRQ_POKP, + AXP288_IRQ_TIMER, + AXP288_IRQ_MV_CHNG, + AXP288_IRQ_BC_USB_CHNG, +}; + +#define AXP288_TS_ADC_H 0x58 +#define AXP288_TS_ADC_L 0x59 +#define AXP288_GP_ADC_H 0x5a +#define AXP288_GP_ADC_L 0x5b + struct axp20x_dev { struct device *dev; struct i2c_client *i2c_client; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; long variant; + int nr_cells; + struct mfd_cell *cells; + const struct regmap_config *regmap_cfg; + const struct regmap_irq_chip *regmap_irq_chip; }; #endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 73e1709d4c09..a76bc100bf97 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -111,6 +111,13 @@ extern int mfd_add_devices(struct device *parent, int id, struct resource *mem_base, int irq_base, struct irq_domain *irq_domain); +static inline int mfd_add_hotplug_devices(struct device *parent, + const struct mfd_cell *cells, int n_devs) +{ + return mfd_add_devices(parent, PLATFORM_DEVID_AUTO, cells, n_devs, + NULL, 0, NULL); +} + extern void mfd_remove_devices(struct device *parent); #endif diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h new file mode 100644 index 000000000000..004b24576da8 --- /dev/null +++ b/include/linux/mfd/dln2.h @@ -0,0 +1,103 @@ +#ifndef __LINUX_USB_DLN2_H +#define __LINUX_USB_DLN2_H + +#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8)) + +struct dln2_platform_data { + u16 handle; /* sub-driver handle (internally used only) */ + u8 port; /* I2C/SPI port */ +}; + +/** + * dln2_event_cb_t - event callback function signature + * + * @pdev - the sub-device that registered this callback + * @echo - the echo header field received in the message + * @data - the data payload + * @len - the data payload length + * + * The callback function is called in interrupt context and the data payload is + * only valid during the call. If the user needs later access of the data, it + * must copy it. + */ + +typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo, + const void *data, int len); + +/** + * dl2n_register_event_cb - register a callback function for an event + * + * @pdev - the sub-device that registers the callback + * @event - the event for which to register a callback + * @event_cb - the callback function + * + * @return 0 in case of success, negative value in case of error + */ +int dln2_register_event_cb(struct platform_device *pdev, u16 event, + dln2_event_cb_t event_cb); + +/** + * dln2_unregister_event_cb - unregister the callback function for an event + * + * @pdev - the sub-device that registered the callback + * @event - the event for which to register a callback + */ +void dln2_unregister_event_cb(struct platform_device *pdev, u16 event); + +/** + * dln2_transfer - issue a DLN2 command and wait for a response and the + * associated data + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ +int dln2_transfer(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len); + +/** + * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ + +static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd, + void *ibuf, unsigned *ibuf_len) +{ + return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len); +} + +/** + * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the + * user doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * + * @return 0 for success, negative value for errors + */ +static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len) +{ + return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL); +} + +#endif diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 582e67f34054..08dae01258b9 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -26,7 +26,6 @@ #include <linux/i2c.h> -#define MAX77693_NUM_IRQ_MUIC_REGS 3 #define MAX77693_REG_INVALID (0xff) /* Slave addr = 0xCC: PMIC, Charger, Flash LED */ diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 74346d5e7899..0c12628e91c6 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -558,6 +558,7 @@ #define SD_SAMPLE_POINT_CTL 0xFDA7 #define SD_PUSH_POINT_CTL 0xFDA8 #define SD_CMD0 0xFDA9 +#define SD_CMD_START 0x40 #define SD_CMD1 0xFDAA #define SD_CMD2 0xFDAB #define SD_CMD3 0xFDAC @@ -707,6 +708,14 @@ #define PM_CTRL1 0xFF44 #define PM_CTRL2 0xFF45 #define PM_CTRL3 0xFF46 +#define SDIO_SEND_PME_EN 0x80 +#define FORCE_RC_MODE_ON 0x40 +#define FORCE_RX50_LINK_ON 0x20 +#define D3_DELINK_MODE_EN 0x10 +#define USE_PESRTB_CTL_DELINK 0x08 +#define DELAY_PIN_WAKE 0x04 +#define RESET_PIN_WAKE 0x02 +#define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 /* Memory mapping */ @@ -752,6 +761,14 @@ #define PHY_DUM_REG 0x1F #define LCTLR 0x80 +#define LCTLR_EXT_SYNC 0x80 +#define LCTLR_COMMON_CLOCK_CFG 0x40 +#define LCTLR_RETRAIN_LINK 0x20 +#define LCTLR_LINK_DISABLE 0x10 +#define LCTLR_RCB 0x08 +#define LCTLR_RESERVED 0x04 +#define LCTLR_ASPM_CTL_MASK 0x03 + #define PCR_SETTING_REG1 0x724 #define PCR_SETTING_REG2 0x814 #define PCR_SETTING_REG3 0x747 @@ -967,4 +984,24 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) return (u8 *)(pcr->host_cmds_ptr); } +static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr, + u8 mask, u8 append) +{ + int err; + u8 val; + + err = pci_read_config_byte(pcr->pci, addr, &val); + if (err < 0) + return err; + return pci_write_config_byte(pcr->pci, addr, (val & mask) | append); +} + +static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val) +{ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val); +} + #endif diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 1825edacbda7..3fdb7cfbffb3 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -28,6 +28,7 @@ #define MIN_800_MV 800000 #define MIN_750_MV 750000 #define MIN_600_MV 600000 +#define MIN_500_MV 500000 /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 @@ -41,6 +42,7 @@ enum sec_device_type { S5M8767X, S2MPA01, S2MPS11X, + S2MPS13X, S2MPS14X, S2MPU02, }; diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h new file mode 100644 index 000000000000..ce5dda8958fe --- /dev/null +++ b/include/linux/mfd/samsung/s2mps13.h @@ -0,0 +1,186 @@ +/* + * s2mps13.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS13_H +#define __LINUX_MFD_S2MPS13_H + +/* S2MPS13 registers */ +enum s2mps13_reg { + S2MPS13_REG_ID, + S2MPS13_REG_INT1, + S2MPS13_REG_INT2, + S2MPS13_REG_INT3, + S2MPS13_REG_INT1M, + S2MPS13_REG_INT2M, + S2MPS13_REG_INT3M, + S2MPS13_REG_ST1, + S2MPS13_REG_ST2, + S2MPS13_REG_PWRONSRC, + S2MPS13_REG_OFFSRC, + S2MPS13_REG_BU_CHG, + S2MPS13_REG_RTCCTRL, + S2MPS13_REG_CTRL1, + S2MPS13_REG_CTRL2, + S2MPS13_REG_RSVD1, + S2MPS13_REG_RSVD2, + S2MPS13_REG_RSVD3, + S2MPS13_REG_RSVD4, + S2MPS13_REG_RSVD5, + S2MPS13_REG_RSVD6, + S2MPS13_REG_CTRL3, + S2MPS13_REG_RSVD7, + S2MPS13_REG_RSVD8, + S2MPS13_REG_WRSTBI, + S2MPS13_REG_B1CTRL, + S2MPS13_REG_B1OUT, + S2MPS13_REG_B2CTRL, + S2MPS13_REG_B2OUT, + S2MPS13_REG_B3CTRL, + S2MPS13_REG_B3OUT, + S2MPS13_REG_B4CTRL, + S2MPS13_REG_B4OUT, + S2MPS13_REG_B5CTRL, + S2MPS13_REG_B5OUT, + S2MPS13_REG_B6CTRL, + S2MPS13_REG_B6OUT, + S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7OUT, + S2MPS13_REG_B8CTRL, + S2MPS13_REG_B8OUT, + S2MPS13_REG_B9CTRL, + S2MPS13_REG_B9OUT, + S2MPS13_REG_B10CTRL, + S2MPS13_REG_B10OUT, + S2MPS13_REG_BB1CTRL, + S2MPS13_REG_BB1OUT, + S2MPS13_REG_BUCK_RAMP1, + S2MPS13_REG_BUCK_RAMP2, + S2MPS13_REG_LDO_DVS1, + S2MPS13_REG_LDO_DVS2, + S2MPS13_REG_LDO_DVS3, + S2MPS13_REG_B6OUT2, + S2MPS13_REG_L1CTRL, + S2MPS13_REG_L2CTRL, + S2MPS13_REG_L3CTRL, + S2MPS13_REG_L4CTRL, + S2MPS13_REG_L5CTRL, + S2MPS13_REG_L6CTRL, + S2MPS13_REG_L7CTRL, + S2MPS13_REG_L8CTRL, + S2MPS13_REG_L9CTRL, + S2MPS13_REG_L10CTRL, + S2MPS13_REG_L11CTRL, + S2MPS13_REG_L12CTRL, + S2MPS13_REG_L13CTRL, + S2MPS13_REG_L14CTRL, + S2MPS13_REG_L15CTRL, + S2MPS13_REG_L16CTRL, + S2MPS13_REG_L17CTRL, + S2MPS13_REG_L18CTRL, + S2MPS13_REG_L19CTRL, + S2MPS13_REG_L20CTRL, + S2MPS13_REG_L21CTRL, + S2MPS13_REG_L22CTRL, + S2MPS13_REG_L23CTRL, + S2MPS13_REG_L24CTRL, + S2MPS13_REG_L25CTRL, + S2MPS13_REG_L26CTRL, + S2MPS13_REG_L27CTRL, + S2MPS13_REG_L28CTRL, + S2MPS13_REG_L30CTRL, + S2MPS13_REG_L31CTRL, + S2MPS13_REG_L32CTRL, + S2MPS13_REG_L33CTRL, + S2MPS13_REG_L34CTRL, + S2MPS13_REG_L35CTRL, + S2MPS13_REG_L36CTRL, + S2MPS13_REG_L37CTRL, + S2MPS13_REG_L38CTRL, + S2MPS13_REG_L39CTRL, + S2MPS13_REG_L40CTRL, + S2MPS13_REG_LDODSCH1, + S2MPS13_REG_LDODSCH2, + S2MPS13_REG_LDODSCH3, + S2MPS13_REG_LDODSCH4, + S2MPS13_REG_LDODSCH5, +}; + +/* regulator ids */ +enum s2mps13_regulators { + S2MPS13_LDO1, + S2MPS13_LDO2, + S2MPS13_LDO3, + S2MPS13_LDO4, + S2MPS13_LDO5, + S2MPS13_LDO6, + S2MPS13_LDO7, + S2MPS13_LDO8, + S2MPS13_LDO9, + S2MPS13_LDO10, + S2MPS13_LDO11, + S2MPS13_LDO12, + S2MPS13_LDO13, + S2MPS13_LDO14, + S2MPS13_LDO15, + S2MPS13_LDO16, + S2MPS13_LDO17, + S2MPS13_LDO18, + S2MPS13_LDO19, + S2MPS13_LDO20, + S2MPS13_LDO21, + S2MPS13_LDO22, + S2MPS13_LDO23, + S2MPS13_LDO24, + S2MPS13_LDO25, + S2MPS13_LDO26, + S2MPS13_LDO27, + S2MPS13_LDO28, + S2MPS13_LDO29, + S2MPS13_LDO30, + S2MPS13_LDO31, + S2MPS13_LDO32, + S2MPS13_LDO33, + S2MPS13_LDO34, + S2MPS13_LDO35, + S2MPS13_LDO36, + S2MPS13_LDO37, + S2MPS13_LDO38, + S2MPS13_LDO39, + S2MPS13_LDO40, + S2MPS13_BUCK1, + S2MPS13_BUCK2, + S2MPS13_BUCK3, + S2MPS13_BUCK4, + S2MPS13_BUCK5, + S2MPS13_BUCK6, + S2MPS13_BUCK7, + S2MPS13_BUCK8, + S2MPS13_BUCK9, + S2MPS13_BUCK10, + + S2MPS13_REGULATOR_MAX, +}; + +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS13_BUCK_RAMP_DELAY 12500 + +#endif /* __LINUX_MFD_S2MPS13_H */ diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index e6088c2e2092..e1c12d84c26a 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -164,13 +164,10 @@ struct tc3589x_keypad_platform_data { /** * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data - * @gpio_base: first gpio number assigned to TC3589x. A maximum of - * %TC3589x_NR_GPIOS GPIOs will be allocated. * @setup: callback for board-specific initialization * @remove: callback for board-specific teardown */ struct tc3589x_gpio_platform_data { - int gpio_base; void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base); void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base); }; @@ -178,18 +175,13 @@ struct tc3589x_gpio_platform_data { /** * struct tc3589x_platform_data - TC3589x platform data * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*) - * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used. * @gpio: GPIO-specific platform data * @keypad: keypad-specific platform data */ struct tc3589x_platform_data { unsigned int block; - int irq_base; struct tc3589x_gpio_platform_data *gpio; const struct tc3589x_keypad_platform_data *keypad; }; -#define TC3589x_NR_GPIOS 24 -#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS) - #endif diff --git a/include/linux/of.h b/include/linux/of.h index 29f0adc5f3e4..364a15858746 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -922,4 +922,15 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, /* CONFIG_OF_RESOLVE api */ extern int of_resolve_phandles(struct device_node *tree); +/** + * of_system_has_poweroff_source - Tells if poweroff-source is found for device_node + * @np: Pointer to the given device_node + * + * return true if present false otherwise + */ +static inline bool of_system_has_poweroff_source(const struct device_node *np) +{ + return of_property_read_bool(np, "poweroff-source"); +} + #endif /* _LINUX_OF_H */ |
