diff options
| -rw-r--r-- | arch/mips/cavium-octeon/dma-octeon.c | 17 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/setup.c | 34 | ||||
| -rw-r--r-- | arch/mips/include/asm/octeon/pci-octeon.h | 13 | ||||
| -rw-r--r-- | arch/mips/pci/pcie-octeon.c | 37 |
4 files changed, 87 insertions, 14 deletions
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index be531ec1f206..d22b5a2d64f4 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -99,13 +99,16 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) panic("dma_map_single: " "Attempt to map illegal memory address 0x%llx\n", physical); - else if ((physical + size >= - (4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20)) - && physical < (4ull<<30)) - pr_warning("dma_map_single: Warning: " - "Mapping memory address that might " - "conflict with devices 0x%llx-0x%llx\n", - physical, physical+size-1); + else if (physical >= CVMX_PCIE_BAR1_PHYS_BASE && + physical + size < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE)) { + result = physical - CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_RC_BASE; + + if (((result+size-1) & dma_mask) != result+size-1) + panic("dma_map_single: Attempt to map address 0x%llx-0x%llx, which can't be accessed according to the dma mask 0x%llx\n", + physical, physical+size-1, dma_mask); + goto done; + } + /* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */ if ((physical >= 0x410000000ull) && physical < 0x420000000ull) result = physical - 0x400000000ull; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 041326e34f4d..69197cb6c7ea 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -32,6 +32,7 @@ #include <asm/time.h> #include <asm/octeon/octeon.h> +#include <asm/octeon/pci-octeon.h> #ifdef CONFIG_CAVIUM_DECODE_RSL extern void cvmx_interrupt_rsl_decode(void); @@ -609,6 +610,22 @@ void __init prom_init(void) register_smp_ops(&octeon_smp_ops); } +/* Exclude a single page from the regions obtained in plat_mem_setup. */ +static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size) +{ + if (addr > *mem && addr < *mem + *size) { + u64 inc = addr - *mem; + add_memory_region(*mem, inc, BOOT_MEM_RAM); + *mem += inc; + *size -= inc; + } + + if (addr == *mem && *size > PAGE_SIZE) { + *mem += PAGE_SIZE; + *size -= PAGE_SIZE; + } +} + void __init plat_mem_setup(void) { uint64_t mem_alloc_size; @@ -659,12 +676,27 @@ void __init plat_mem_setup(void) CVMX_BOOTMEM_FLAG_NO_LOCKING); #endif if (memory >= 0) { + u64 size = mem_alloc_size; + + /* + * exclude a page at the beginning and end of + * the 256MB PCIe 'hole' so the kernel will not + * try to allocate multi-page buffers that + * span the discontinuity. + */ + memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE, + &memory, &size); + memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE + + CVMX_PCIE_BAR1_PHYS_SIZE, + &memory, &size); + /* * This function automatically merges address * regions next to each other if they are * received in incrementing order. */ - add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM); + if (size) + add_memory_region(memory, size, BOOT_MEM_RAM); total += mem_alloc_size; } else { break; diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h index 6ac5d3e3398e..ece78043acf6 100644 --- a/arch/mips/include/asm/octeon/pci-octeon.h +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -15,6 +15,19 @@ #define PCI_CONFIG_SPACE_DELAY 10000 /* + * The physical memory base mapped by BAR1. 256MB at the end of the + * first 4GB. + */ +#define CVMX_PCIE_BAR1_PHYS_BASE ((1ull << 32) - (1ull << 28)) +#define CVMX_PCIE_BAR1_PHYS_SIZE (1ull << 28) + +/* + * The RC base of BAR1. gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2, + * place BAR1 so it is the same for both. + */ +#define CVMX_PCIE_BAR1_RC_BASE (1ull << 41) + +/* * pcibios_map_irq() is defined inside pci-octeon.c. All it does is * call the Octeon specific version pointed to by this variable. This * function needs to change for PCI or PCIe based hosts. diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c index 6aa5c542d52d..861361e0c9af 100644 --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -402,6 +402,10 @@ static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) npei_ctl_status2.s.mps = 0; /* Max read request size = 128 bytes for best Octeon DMA performance */ npei_ctl_status2.s.mrrs = 0; + if (pcie_port) + npei_ctl_status2.s.c1_b1_s = 3; /* Port1 BAR1 Size 256MB */ + else + npei_ctl_status2.s.c0_b1_s = 3; /* Port0 BAR1 Size 256MB */ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ @@ -666,6 +670,8 @@ static int __cvmx_pcie_rc_initialize_link(int pcie_port) static int cvmx_pcie_rc_initialize(int pcie_port) { int i; + int base; + u64 addr_swizzle; union cvmx_ciu_soft_prst ciu_soft_prst; union cvmx_pescx_bist_status pescx_bist_status; union cvmx_pescx_bist_status2 pescx_bist_status2; @@ -674,6 +680,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port) union cvmx_npei_mem_access_subidx mem_access_subid; union cvmx_npei_dbg_data npei_dbg_data; union cvmx_pescx_ctl_status2 pescx_ctl_status2; + union cvmx_npei_bar1_indexx bar1_index; /* * Make sure we aren't trying to setup a target mode interface @@ -918,12 +925,30 @@ static int cvmx_pcie_rc_initialize(int pcie_port) /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); - /* - * Disable Octeon's BAR1. It isn't needed in RC mode since - * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into - * the 2nd 256MB of memory. - */ - cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1); + /* BAR1 follows BAR2 with a gap. */ + cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE); + + bar1_index.u32 = 0; + bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22); + bar1_index.s.ca = 1; /* Not Cached */ + bar1_index.s.end_swp = 1; /* Endian Swap mode */ + bar1_index.s.addr_v = 1; /* Valid entry */ + + base = pcie_port ? 16 : 0; + + /* Big endian swizzle for 32-bit PEXP_NCB register. */ +#ifdef __MIPSEB__ + addr_swizzle = 4; +#else + addr_swizzle = 0; +#endif + for (i = 0; i < 16; i++) { + cvmx_write64_uint32((CVMX_PEXP_NPEI_BAR1_INDEXX(base) ^ addr_swizzle), + bar1_index.u32); + base++; + /* 256MB / 16 >> 22 == 4 */ + bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22); + } /* * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take |
