Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 520 insertions, 0 deletions

diff --git a/sound/oss/cs4232.c b/sound/oss/cs4232.c
new file mode 100644
index 000000000000..6ec308f5d935
--- /dev/null
+++ b/sound/oss/cs4232.c
@@ -0,0 +1,520 @@
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ *	cs4232.c
+ *
+ * The low level driver for Crystal CS4232 based cards. The CS4232 is
+ * a PnP compatible chip which contains a CS4231A codec, SB emulation,
+ * a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM 
+ * interfaces. This is just a temporary driver until full PnP support
+ * gets implemented. Just the WSS codec, FM synth and the MIDI ports are
+ * supported. Other interfaces are left uninitialized.
+ *
+ * ifdef ...WAVEFRONT...
+ * 
+ *   Support is provided for initializing the WaveFront synth
+ *   interface as well, which is logical device #4. Note that if
+ *   you have a Tropez+ card, you probably don't need to setup
+ *   the CS4232-supported MIDI interface, since it corresponds to
+ *   the internal 26-pin header that's hard to access. Using this
+ *   requires an additional IRQ, a resource none too plentiful in
+ *   this environment. Just don't set module parameters mpuio and
+ *   mpuirq, and the MIDI port will be left uninitialized. You can
+ *   still use the ICS2115 hosted MIDI interface which corresponds
+ *   to the 9-pin D connector on the back of the card.
+ *
+ * endif  ...WAVEFRONT...
+ *
+ * Supported chips are:
+ *      CS4232
+ *      CS4236
+ *      CS4236B
+ *
+ * Note: You will need a PnP config setup to initialise some CS4232 boards
+ * anyway.
+ *
+ * Changes
+ *      John Rood               Added Bose Sound System Support.
+ *      Toshio Spoor
+ *	Alan Cox		Modularisation, Basic cleanups.
+ *      Paul Barton-Davis	Separated MPU configuration, added
+ *                                       Tropez+ (WaveFront) support
+ *	Christoph Hellwig	Adapted to module_init/module_exit,
+ * 					simple cleanups
+ * 	Arnaldo C. de Melo	got rid of attach_uart401
+ *	Bartlomiej Zolnierkiewicz
+ *				Added some __init/__initdata/__exit
+ *	Marcus Meissner		Added ISA PnP support.
+ */
+
+#include <linux/config.h>
+#include <linux/pnp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "sound_config.h"
+
+#include "ad1848.h"
+#include "mpu401.h"
+
+#define KEY_PORT	0x279	/* Same as LPT1 status port */
+#define CSN_NUM		0x99	/* Just a random number */
+#define INDEX_ADDRESS   0x00    /* (R0) Index Address Register */
+#define INDEX_DATA      0x01    /* (R1) Indexed Data Register */
+#define PIN_CONTROL     0x0a    /* (I10) Pin Control */
+#define ENABLE_PINS     0xc0    /* XCTRL0/XCTRL1 enable */
+
+static void CS_OUT(unsigned char a)
+{
+	outb(a, KEY_PORT);
+}
+
+#define CS_OUT2(a, b)		{CS_OUT(a);CS_OUT(b);}
+#define CS_OUT3(a, b, c)	{CS_OUT(a);CS_OUT(b);CS_OUT(c);}
+
+static int __initdata bss       = 0;
+static int mpu_base, mpu_irq;
+static int synth_base, synth_irq;
+static int mpu_detected;
+
+static int probe_cs4232_mpu(struct address_info *hw_config)
+{
+	/*
+	 *	Just write down the config values.
+	 */
+
+	mpu_base = hw_config->io_base;
+	mpu_irq = hw_config->irq;
+
+	return 1;
+}
+
+static unsigned char crystal_key[] =	/* A 32 byte magic key sequence */
+{
+	0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc,
+	0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2,
+	0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13,
+	0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a
+};
+
+static void sleep(unsigned howlong)
+{
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(howlong);
+}
+
+static void enable_xctrl(int baseio)
+{
+        unsigned char regd;
+                
+        /*
+         * Some IBM Aptiva's have the Bose Sound System. By default
+         * the Bose Amplifier is disabled. The amplifier will be 
+         * activated, by setting the XCTRL0 and XCTRL1 bits.
+         * Volume of the monitor bose speakers/woofer, can then
+         * be set by changing the PCM volume.
+         *
+         */
+                
+        printk("cs4232: enabling Bose Sound System Amplifier.\n");
+        
+        /* Switch to Pin Control Address */                   
+        regd = inb(baseio + INDEX_ADDRESS) & 0xe0;
+        outb(((unsigned char) (PIN_CONTROL | regd)), baseio + INDEX_ADDRESS );
+        
+        /* Activate the XCTRL0 and XCTRL1 Pins */
+        regd = inb(baseio + INDEX_DATA);
+        outb(((unsigned char) (ENABLE_PINS | regd)), baseio + INDEX_DATA );
+}
+
+static int __init probe_cs4232(struct address_info *hw_config, int isapnp_configured)
+{
+	int i, n;
+	int base = hw_config->io_base, irq = hw_config->irq;
+	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
+	struct resource *ports;
+
+	if (base == -1 || irq == -1 || dma1 == -1) {
+		printk(KERN_ERR "cs4232: dma, irq and io must be set.\n");
+		return 0;
+	}
+
+	/*
+	 * Verify that the I/O port range is free.
+	 */
+
+	ports = request_region(base, 4, "ad1848");
+	if (!ports) {
+		printk(KERN_ERR "cs4232.c: I/O port 0x%03x not free\n", base);
+		return 0;
+	}
+	if (ad1848_detect(ports, NULL, hw_config->osp)) {
+		goto got_it;	/* The card is already active */
+	}
+	if (isapnp_configured) {
+		printk(KERN_ERR "cs4232.c: ISA PnP configured, but not detected?\n");
+		goto fail;
+	}
+
+	/*
+	 * This version of the driver doesn't use the PnP method when configuring
+	 * the card but a simplified method defined by Crystal. This means that
+	 * just one CS4232 compatible device can exist on the system. Also this
+	 * method conflicts with possible PnP support in the OS. For this reason 
+	 * driver is just a temporary kludge.
+	 *
+	 * Also the Cirrus/Crystal method doesn't always work. Try ISA PnP first ;)
+	 */
+
+	/*
+	 * Repeat initialization few times since it doesn't always succeed in
+	 * first time.
+	 */
+
+	for (n = 0; n < 4; n++)
+	{	
+		/*
+		 *	Wake up the card by sending a 32 byte Crystal key to the key port.
+		 */
+		
+		for (i = 0; i < 32; i++)
+			CS_OUT(crystal_key[i]);
+
+		sleep(HZ / 10);
+
+		/*
+		 *	Now set the CSN (Card Select Number).
+		 */
+
+		CS_OUT2(0x06, CSN_NUM);
+
+		/*
+		 *	Then set some config bytes. First logical device 0 
+		 */
+
+		CS_OUT2(0x15, 0x00);	/* Select logical device 0 (WSS/SB/FM) */
+		CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff);	/* WSS base */
+
+		if (check_region(0x388, 4))	/* Not free */
+			CS_OUT3(0x48, 0x00, 0x00)	/* FM base off */
+		else
+			CS_OUT3(0x48, 0x03, 0x88);	/* FM base 0x388 */
+
+		CS_OUT3(0x42, 0x00, 0x00);	/* SB base off */
+		CS_OUT2(0x22, irq);		/* SB+WSS IRQ */
+		CS_OUT2(0x2a, dma1);		/* SB+WSS DMA */
+
+		if (dma2 != -1)
+			CS_OUT2(0x25, dma2)	/* WSS DMA2 */
+		else
+			CS_OUT2(0x25, 4);	/* No WSS DMA2 */
+
+		CS_OUT2(0x33, 0x01);	/* Activate logical dev 0 */
+
+		sleep(HZ / 10);
+
+		/*
+		 * Initialize logical device 3 (MPU)
+		 */
+
+		if (mpu_base != 0 && mpu_irq != 0)
+		{
+			CS_OUT2(0x15, 0x03);	/* Select logical device 3 (MPU) */
+			CS_OUT3(0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff);	/* MPU base */
+			CS_OUT2(0x22, mpu_irq);	/* MPU IRQ */
+			CS_OUT2(0x33, 0x01);	/* Activate logical dev 3 */
+		}
+
+		if(synth_base != 0)
+		{
+		    CS_OUT2 (0x15, 0x04);	        /* logical device 4 (WaveFront) */
+		    CS_OUT3 (0x47, (synth_base >> 8) & 0xff,
+			     synth_base & 0xff);	/* base */
+		    CS_OUT2 (0x22, synth_irq);     	/* IRQ */
+		    CS_OUT2 (0x33, 0x01);	        /* Activate logical dev 4 */
+		}
+
+		/*
+		 * Finally activate the chip
+		 */
+		
+		CS_OUT(0x79);
+
+		sleep(HZ / 5);
+
+		/*
+		 * Then try to detect the codec part of the chip
+		 */
+
+		if (ad1848_detect(ports, NULL, hw_config->osp))
+			goto got_it;
+		
+		sleep(HZ);
+	}
+fail:
+	release_region(base, 4);
+	return 0;
+
+got_it:
+	if (dma2 == -1)
+		dma2 = dma1;
+
+	hw_config->slots[0] = ad1848_init("Crystal audio controller", ports,
+					  irq,
+					  dma1,		/* Playback DMA */
+					  dma2,		/* Capture DMA */
+					  0,
+					  hw_config->osp,
+					  THIS_MODULE);
+
+	if (hw_config->slots[0] != -1 &&
+		audio_devs[hw_config->slots[0]]->mixer_dev!=-1)
+	{	
+		/* Assume the mixer map is as suggested in the CS4232 databook */
+		AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
+		AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
+		AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH);		/* FM synth */
+	}
+	if (mpu_base != 0 && mpu_irq != 0)
+	{
+		static struct address_info hw_config2 = {
+			0
+		};		/* Ensure it's initialized */
+
+		hw_config2.io_base = mpu_base;
+		hw_config2.irq = mpu_irq;
+		hw_config2.dma = -1;
+		hw_config2.dma2 = -1;
+		hw_config2.always_detect = 0;
+		hw_config2.name = NULL;
+		hw_config2.driver_use_1 = 0;
+		hw_config2.driver_use_2 = 0;
+		hw_config2.card_subtype = 0;
+
+		if (probe_uart401(&hw_config2, THIS_MODULE))
+		{
+			mpu_detected = 1;
+		}
+		else
+		{
+			mpu_base = mpu_irq = 0;
+		}
+		hw_config->slots[1] = hw_config2.slots[1];
+	}
+	
+	if (bss)
+        	enable_xctrl(base);
+
+	return 1;
+}
+
+static void __devexit unload_cs4232(struct address_info *hw_config)
+{
+	int base = hw_config->io_base, irq = hw_config->irq;
+	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
+
+	if (dma2 == -1)
+		dma2 = dma1;
+
+	ad1848_unload(base,
+		      irq,
+		      dma1,	/* Playback DMA */
+		      dma2,	/* Capture DMA */
+		      0);
+
+	sound_unload_audiodev(hw_config->slots[0]);
+	if (mpu_base != 0 && mpu_irq != 0 && mpu_detected)
+	{
+		static struct address_info hw_config2 =
+		{
+			0
+		};		/* Ensure it's initialized */
+
+		hw_config2.io_base = mpu_base;
+		hw_config2.irq = mpu_irq;
+		hw_config2.dma = -1;
+		hw_config2.dma2 = -1;
+		hw_config2.always_detect = 0;
+		hw_config2.name = NULL;
+		hw_config2.driver_use_1 = 0;
+		hw_config2.driver_use_2 = 0;
+		hw_config2.card_subtype = 0;
+		hw_config2.slots[1] = hw_config->slots[1];
+
+		unload_uart401(&hw_config2);
+	}
+}
+
+static struct address_info cfg;
+static struct address_info cfg_mpu;
+
+static int __initdata io	= -1;
+static int __initdata irq	= -1;
+static int __initdata dma	= -1;
+static int __initdata dma2	= -1;
+static int __initdata mpuio	= -1;
+static int __initdata mpuirq	= -1;
+static int __initdata synthio	= -1;
+static int __initdata synthirq	= -1;
+static int __initdata isapnp	= 1;
+
+MODULE_DESCRIPTION("CS4232 based soundcard driver"); 
+MODULE_AUTHOR("Hannu Savolainen, Paul Barton-Davis"); 
+MODULE_LICENSE("GPL");
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io,"base I/O port for AD1848");
+module_param(irq, int, 0);
+MODULE_PARM_DESC(irq,"IRQ for AD1848 chip");
+module_param(dma, int, 0);
+MODULE_PARM_DESC(dma,"8 bit DMA for AD1848 chip");
+module_param(dma2, int, 0);
+MODULE_PARM_DESC(dma2,"16 bit DMA for AD1848 chip");
+module_param(mpuio, int, 0);
+MODULE_PARM_DESC(mpuio,"MPU 401 base address");
+module_param(mpuirq, int, 0);
+MODULE_PARM_DESC(mpuirq,"MPU 401 IRQ");
+module_param(synthio, int, 0);
+MODULE_PARM_DESC(synthio,"Maui WaveTable base I/O port");
+module_param(synthirq, int, 0);
+MODULE_PARM_DESC(synthirq,"Maui WaveTable IRQ");
+module_param(isapnp, bool, 0);
+MODULE_PARM_DESC(isapnp,"Enable ISAPnP probing (default 1)");
+module_param(bss, bool, 0);
+MODULE_PARM_DESC(bss,"Enable Bose Sound System Support (default 0)");
+
+/*
+ *	Install a CS4232 based card. Need to have ad1848 and mpu401
+ *	loaded ready.
+ */
+
+/* All cs4232 based cards have the main ad1848 card either as CSC0000 or
+ * CSC0100. */
+static const struct pnp_device_id cs4232_pnp_table[] = {
+	{ .id = "CSC0100", .driver_data = 0 },
+	{ .id = "CSC0000", .driver_data = 0 },
+	/* Guillemot Turtlebeach something appears to be cs4232 compatible
+	 * (untested) */
+	{ .id = "GIM0100", .driver_data = 0 },
+	{ .id = ""}
+};
+
+MODULE_DEVICE_TABLE(pnp, cs4232_pnp_table);
+
+static int cs4232_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+	struct address_info *isapnpcfg;
+
+	isapnpcfg=(struct address_info*)kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
+	if (!isapnpcfg)
+		return -ENOMEM;
+
+	isapnpcfg->irq		= pnp_irq(dev, 0);
+	isapnpcfg->dma		= pnp_dma(dev, 0);
+	isapnpcfg->dma2		= pnp_dma(dev, 1);
+	isapnpcfg->io_base	= pnp_port_start(dev, 0);
+	if (probe_cs4232(isapnpcfg,TRUE) == 0) {
+		printk(KERN_ERR "cs4232: ISA PnP card found, but not detected?\n");
+		kfree(isapnpcfg);
+		return -ENODEV;
+	}
+	pnp_set_drvdata(dev,isapnpcfg);
+	return 0;
+}
+
+static void __devexit cs4232_pnp_remove(struct pnp_dev *dev)
+{
+	struct address_info *cfg = pnp_get_drvdata(dev);
+	if (cfg) {
+		unload_cs4232(cfg);
+		kfree(cfg);
+	}
+}
+
+static struct pnp_driver cs4232_driver = {
+	.name		= "cs4232",
+	.id_table	= cs4232_pnp_table,
+	.probe		= cs4232_pnp_probe,
+	.remove		= __devexit_p(cs4232_pnp_remove),
+};
+
+static int __init init_cs4232(void)
+{
+#ifdef CONFIG_SOUND_WAVEFRONT_MODULE
+	if(synthio == -1)
+		printk(KERN_INFO "cs4232: set synthio and synthirq to use the wavefront facilities.\n");
+	else {
+		synth_base = synthio;
+		synth_irq =  synthirq;
+	}
+#else
+	if(synthio != -1)
+		printk(KERN_WARNING "cs4232: wavefront support not enabled in this driver.\n");
+#endif
+	cfg.irq = -1;
+
+	if (isapnp &&
+	    (pnp_register_driver(&cs4232_driver) > 0)
+	)
+		return 0;
+
+	if(io==-1||irq==-1||dma==-1)
+	{
+		printk(KERN_ERR "cs4232: Must set io, irq and dma.\n");
+		return -ENODEV;
+	}
+
+	cfg.io_base = io;
+	cfg.irq = irq;
+	cfg.dma = dma;
+	cfg.dma2 = dma2;
+
+	cfg_mpu.io_base = -1;
+	cfg_mpu.irq = -1;
+
+	if (mpuio != -1 && mpuirq != -1) {
+		cfg_mpu.io_base = mpuio;
+		cfg_mpu.irq = mpuirq;
+		probe_cs4232_mpu(&cfg_mpu); /* Bug always returns 0 not OK -- AC */
+	}
+
+	if (probe_cs4232(&cfg,FALSE) == 0)
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __exit cleanup_cs4232(void)
+{
+	pnp_unregister_driver(&cs4232_driver);
+        if (cfg.irq != -1)
+		unload_cs4232(&cfg); /* Unloads global MPU as well, if needed */
+}
+
+module_init(init_cs4232);
+module_exit(cleanup_cs4232);
+
+#ifndef MODULE
+static int __init setup_cs4232(char *str)
+{
+	/* io, irq, dma, dma2 mpuio, mpuirq*/
+	int ints[7];
+
+	/* If we have isapnp cards, no need for options */
+	if (pnp_register_driver(&cs4232_driver) > 0)
+		return 1;
+	
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+	
+	io	= ints[1];
+	irq	= ints[2];
+	dma	= ints[3];
+	dma2	= ints[4];
+	mpuio	= ints[5];
+	mpuirq	= ints[6];
+
+	return 1;
+}
+
+__setup("cs4232=", setup_cs4232);
+#endif