diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/oss/aedsp16.c | |
download | talos-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz talos-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'sound/oss/aedsp16.c')
-rw-r--r-- | sound/oss/aedsp16.c | 1381 |
1 files changed, 1381 insertions, 0 deletions
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c new file mode 100644 index 000000000000..b556263a57f5 --- /dev/null +++ b/sound/oss/aedsp16.c @@ -0,0 +1,1381 @@ +/* + sound/oss/aedsp16.c + + Audio Excel DSP 16 software configuration routines + Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ +/* + * Include the main OSS Lite header file. It include all the os, OSS Lite, etc + * headers needed by this source. + */ +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/init.h> +#include "sound_config.h" + +/* + * Sanity checks + */ + +#if defined(CONFIG_SOUND_AEDSP16_SBPRO) && defined(CONFIG_SOUND_AEDSP16_MSS) +#error You have to enable only one of the MSS and SBPRO emulations. +#endif + +/* + + READ THIS + + This module started to configure the Audio Excel DSP 16 Sound Card. + Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards. + + NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this + audio card and want to see the kernel support for it, please contact me. + + Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401 + compatible card. + It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq), + so before this module, the only way to configure the DSP under linux was + boot the MS-DOS loading the sound.sys device driver (this driver soft- + configure the sound board hardware by massaging someone of its registers), + and then ctrl-alt-del to boot linux with the DSP configured by the DOS + driver. + + This module works configuring your Audio Excel DSP 16's irq, dma and + mpu-401-irq. The OSS Lite routines rely on the fact that if the + hardware is there, they can detect it. The problem with AEDSP16 is + that no hardware can be found by the probe routines if the sound card + is not configured properly. Sometimes the kernel probe routines can find + an SBPRO even when the card is not configured (this is the standard setup + of the card), but the SBPRO emulation don't work well if the card is not + properly initialized. For this reason + + aedsp16_init_board() + + routine is called before the OSS Lite probe routines try to detect the + hardware. + + NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS) + + NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards + have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They + have to be configured by software. + + NOTE: The driver is merged with the new OSS Lite sound driver. It works + as a lowlevel driver. + + The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS; + the OSS Lite sound driver can be configured for SBPRO and MSS cards + at the same time, but the aedsp16 can't be two cards!! + When we configure it, we have to choose the SBPRO or the MSS emulation + for AEDSP16. We also can install a *REAL* card of the other type (see [1]). + + NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO + please let me know if it works. + + The MPU-401 support can be compiled in together with one of the other + two operating modes. + + NOTE: This is something like plug-and-play: we have only to plug + the AEDSP16 board in the socket, and then configure and compile + a kernel that uses the AEDSP16 software configuration capability. + No jumper setting is needed! + + For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3 + you have just to make config the OSS Lite package, configuring + the AEDSP16 sound card, then activating the SBPro emulation mode + and at last configuring IRQ and DMA. + Compile the kernel and run it. + + NOTE: This means for SC-6000 cards that you can choose irq and dma, + but not the I/O addresses. To change I/O addresses you have to set + them with jumpers. For SC-6600 cards you have no jumpers so you have + to set up your full card configuration in the make config. + + You can change the irq/dma/mirq settings WITHOUT THE NEED to open + your computer and massage the jumpers (there are no irq/dma/mirq + jumpers to be configured anyway, only I/O BASE values have to be + configured with jumpers) + + For some ununderstandable reason, the card default of irq 7, dma 1, + don't work for me. Seems to be an IRQ or DMA conflict. Under heavy + HDD work, the kernel start to erupt out a lot of messages like: + + 'Sound: DMA timed out - IRQ/DRQ config error?' + + For what I can say, I have NOT any conflict at irq 7 (under linux I'm + using the lp polling driver), and dma line 1 is unused as stated by + /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so + I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows! + Anyway a setting of irq 10, dma 3 works really fine. + + NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know + the emulation mode, all the installed hardware and the hardware + configuration (irq and dma settings of all the hardware). + + This init module should work with SBPRO+MSS, when one of the two is + the AEDSP16 emulation and the other the real card. (see [1]) + For example: + + AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other + AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other + + MPU401 should work. (see [2]) + + [1] + --- + Date: Mon, 29 Jul 1997 08:35:40 +0100 + From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk> + + [...] + Just to let you know got my Audio Excel (emulating a MSS) working + with my original SB16, thanks for the driver! + [...] + --- + + [2] Not tested by me for lack of hardware. + + TODO, WISHES AND TECH + + - About I/O ports allocation - + + Request the 2x0h region (port base) in any case if we are using this card. + + NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16 + port base region (see code) does not mean necessarily that we are emulating + sbpro. Even if this region is the sbpro I/O ports region, we use this + region to access the control registers of the card, and if emulating + sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro + registers are not used, in no way, to emulate an sbpro: they are + used only for configuration purposes. + + Started Fri Mar 17 16:13:18 MET 1995 + + v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c) + - Initial code. + v0.2 (ALPHA) + - Cleanups. + - Integrated with Linux voxware v 2.90-2 kernel sound driver. + - SoundBlaster Pro mode configuration. + - Microsoft Sound System mode configuration. + - MPU-401 mode configuration. + v0.3 (ALPHA) + - Cleanups. + - Rearranged the code to let aedsp16_init_board be more general. + - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h + inclusion too. We rely on os.h + - Used the to get a variable + len string (we are not sure about the len of Copyright string). + This works with any SB and compatible. + - Added the code to request_region at device init (should go in + the main body of voxware). + v0.4 (BETA) + - Better configure.c patch for aedsp16 configuration (better + logic of inclusion of AEDSP16 support) + - Modified the conditional compilation to better support more than + one sound card of the emulated type (read the NOTES above) + - Moved the sb init routine from the attach to the very first + probe in sb_card.c + - Rearrangements and cleanups + - Wiped out some unnecessary code and variables: this is kernel + code so it is better save some TEXT and DATA + - Fixed the request_region code. We must allocate the aedsp16 (sbpro) + I/O ports in any case because they are used to access the DSP + configuration registers and we can not allow anyone to get them. + v0.5 + - cleanups on comments + - prep for diffs against v3.0-proto-950402 + v0.6 + - removed the request_region()s when compiling the MODULE sound.o + because we are not allowed (by the actual voxware structure) to + release_region() + v0.7 (pre ALPHA, not distributed) + - started porting this module to kernel 1.3.84. Dummy probe/attach + routines. + v0.8 (ALPHA) + - attached all the init routines. + v0.9 (BETA) + - Integrated with linux-pre2.0.7 + - Integrated with configuration scripts. + - Cleaned up and beautyfied the code. + v0.9.9 (BETA) + - Thanks to Piercarlo Grandi: corrected the conditonal compilation code. + Now only the code configured is compiled in, with some memory saving. + v0.9.10 + - Integration into the sound/lowlevel/ section of the sound driver. + - Re-organized the code. + v0.9.11 (not distributed) + - Rewritten the init interface-routines to initialize the AEDSP16 in + one shot. + - More cosmetics. + - SC-6600 support. + - More soft/hard configuration. + v0.9.12 + - Refined the v0.9.11 code with conditional compilation to distinguish + between SC-6000 and SC-6600 code. + v1.0.0 + - Prep for merging with OSS Lite and Linux kernel 2.1.13 + - Corrected a bug in request/check/release region calls (thanks to the + new kernel exception handling). + v1.1 + - Revamped for integration with new modularized sound drivers: to enhance + the flexibility of modular version, I have removed all the conditional + compilation for SBPRO, MPU and MSS code. Now it is all managed with + the ae_config structure. + v1.2 + - Module informations added. + - Removed aedsp16_delay_10msec(), now using mdelay(10) + - All data and funcs moved to .*.init section. + v1.3 + Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27 + - got rid of check_region + + Known Problems: + - Audio Excel DSP 16 III don't work with this driver. + + Credits: + Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a + lot in testing the 0.9.11 and 0.9.12 versions of this driver. + + */ + + +#define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */ + +#undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */ +#undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */ +#undef AEDSP16_INFO /* Define this to 1 to enable info code */ + +#if defined(AEDSP16_DEBUG) +# define DBG(x) printk x +# if defined(AEDSP16_DEBUG_MORE) +# define DBG1(x) printk x +# else +# define DBG1(x) +# endif +#else +# define DBG(x) +# define DBG1(x) +#endif + +/* + * Misc definitions + */ +#define TRUE 1 +#define FALSE 0 + +/* + * Region Size for request/check/release region. + */ +#define IOBASE_REGION_SIZE 0x10 + +/* + * Hardware related defaults + */ +#define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */ +#define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */ +#define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */ +#define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */ + +/* + * Commands of AEDSP16's DSP (SBPRO+special). + * Some of them are COMMAND_xx, in the future they may change. + */ +#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */ +#define COMMAND_52 0x52 /* */ +#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */ +#define COMMAND_5C 0x5c /* */ +#define COMMAND_60 0x60 /* */ +#define COMMAND_66 0x66 /* */ +#define COMMAND_6C 0x6c /* */ +#define COMMAND_6E 0x6e /* */ +#define COMMAND_88 0x88 /* */ +#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */ +#define COMMAND_C5 0xc5 /* */ +#define GET_DSP_VERSION 0xe1 /* Get DSP Version */ +#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */ + +/* + * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port + * to have the actual I/O port. + * Register permissions are: + * (wo) == Write Only + * (ro) == Read Only + * (w-) == Write + * (r-) == Read + */ +#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */ +#define DSP_READ 0x0a /* offset of DSP READ (ro) */ +#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */ +#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */ +#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */ +#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */ + + +#define RETRY 10 /* Various retry values on I/O opera- */ +#define STATUSRETRY 1000 /* tions. Sometimes we have to */ +#define HARDRETRY 500000 /* wait for previous cmd to complete */ + +/* + * Size of character arrays that store name and version of sound card + */ +#define CARDNAMELEN 15 /* Size of the card's name in chars */ +#define CARDVERLEN 2 /* Size of the card's version in chars */ + +#if defined(CONFIG_SC6600) +/* + * Bitmapped flags of hard configuration + */ +/* + * Decode macros (xl == low byte, xh = high byte) + */ +#define IOBASE(xl) ((xl & 0x01)?0x240:0x220) +#define JOY(xl) (xl & 0x02) +#define MPUADDR(xl) ( \ + (xl & 0x0C)?0x330: \ + (xl & 0x08)?0x320: \ + (xl & 0x04)?0x310: \ + 0x300) +#define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530) +#define CDROM(xh) (xh & 0x20) +#define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200) +/* + * Encode macros + */ +#define BLDIOBASE(xl, val) { \ + xl &= ~0x01; \ + if (val == 0x240) \ + xl |= 0x01; \ + } +#define BLDJOY(xl, val) { \ + xl &= ~0x02; \ + if (val == 1) \ + xl |= 0x02; \ + } +#define BLDMPUADDR(xl, val) { \ + xl &= ~0x0C; \ + switch (val) { \ + case 0x330: \ + xl |= 0x0C; \ + break; \ + case 0x320: \ + xl |= 0x08; \ + break; \ + case 0x310: \ + xl |= 0x04; \ + break; \ + case 0x300: \ + xl |= 0x00; \ + break; \ + default: \ + xl |= 0x00; \ + break; \ + } \ + } +#define BLDWSSADDR(xl, val) { \ + xl &= ~0x10; \ + if (val == 0xE80) \ + xl |= 0x10; \ + } +#define BLDCDROM(xh, val) { \ + xh &= ~0x20; \ + if (val == 1) \ + xh |= 0x20; \ + } +#define BLDCDROMADDR(xh, val) { \ + int tmp = val; \ + tmp -= 0x200; \ + tmp >>= 4; \ + tmp &= 0x1F; \ + xh |= tmp; \ + xh &= 0x7F; \ + xh |= 0x40; \ + } +#endif /* CONFIG_SC6600 */ + +/* + * Bit mapped flags for calling aedsp16_init_board(), and saving the current + * emulation mode. + */ +#define INIT_NONE (0 ) +#define INIT_SBPRO (1<<0) +#define INIT_MSS (1<<1) +#define INIT_MPU401 (1<<2) + +static int soft_cfg __initdata = 0; /* bitmapped config */ +static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */ +static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver: + hi->ver[0] lo->ver[1] */ + +#if defined(CONFIG_SC6600) +static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */ + __initdata = { 0, 0}; +#endif /* CONFIG_SC6600 */ + +#if defined(CONFIG_SC6600) +/* Decoded hard configuration */ +struct d_hcfg { + int iobase; + int joystick; + int mpubase; + int wssbase; + int cdrom; + int cdrombase; +}; + +static struct d_hcfg decoded_hcfg __initdata = {0, }; + +#endif /* CONFIG_SC6600 */ + +/* orVals contain the values to be or'ed */ +struct orVals { + int val; /* irq|mirq|dma */ + int or; /* soft_cfg |= TheStruct.or */ +}; + +/* aedsp16_info contain the audio card configuration */ +struct aedsp16_info { + int base_io; /* base I/O address for accessing card */ + int irq; /* irq value for DSP I/O */ + int mpu_irq; /* irq for mpu401 interface I/O */ + int dma; /* dma value for DSP I/O */ + int mss_base; /* base I/O for Microsoft Sound System */ + int mpu_base; /* base I/O for MPU-401 emulation */ + int init; /* Initialization status of the card */ +}; + +/* + * Magic values that the DSP will eat when configuring irq/mirq/dma + */ +/* DSP IRQ conversion array */ +static struct orVals orIRQ[] __initdata = { + {0x05, 0x28}, + {0x07, 0x08}, + {0x09, 0x10}, + {0x0a, 0x18}, + {0x0b, 0x20}, + {0x00, 0x00} +}; + +/* MPU-401 IRQ conversion array */ +static struct orVals orMIRQ[] __initdata = { + {0x05, 0x04}, + {0x07, 0x44}, + {0x09, 0x84}, + {0x0a, 0xc4}, + {0x00, 0x00} +}; + +/* DMA Channels conversion array */ +static struct orVals orDMA[] __initdata = { + {0x00, 0x01}, + {0x01, 0x02}, + {0x03, 0x03}, + {0x00, 0x00} +}; + +static struct aedsp16_info ae_config = { + DEF_AEDSP16_IOB, + DEF_AEDSP16_IRQ, + DEF_AEDSP16_MRQ, + DEF_AEDSP16_DMA, + -1, + -1, + INIT_NONE +}; + +/* + * Buffers to store audio card informations + */ +static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, }; +static char DSPVersion[CARDVERLEN + 1] __initdata = {0, }; + +static int __init aedsp16_wait_data(int port) +{ + int loop = STATUSRETRY; + unsigned char ret = 0; + + DBG1(("aedsp16_wait_data (0x%x): ", port)); + + do { + ret = inb(port + DSP_DATAVAIL); + /* + * Wait for data available (bit 7 of ret == 1) + */ + } while (!(ret & 0x80) && loop--); + + if (ret & 0x80) { + DBG1(("success.\n")); + return TRUE; + } + + DBG1(("failure.\n")); + return FALSE; +} + +static int __init aedsp16_read(int port) +{ + int inbyte; + + DBG((" Read DSP Byte (0x%x): ", port)); + + if (aedsp16_wait_data(port) == FALSE) { + DBG(("failure.\n")); + return -1; + } + + inbyte = inb(port + DSP_READ); + + DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte)); + + return inbyte; +} + +static int __init aedsp16_test_dsp(int port) +{ + return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE); +} + +static int __init aedsp16_dsp_reset(int port) +{ + /* + * Reset DSP + */ + + DBG(("Reset DSP:\n")); + + outb(1, (port + DSP_RESET)); + udelay(10); + outb(0, (port + DSP_RESET)); + udelay(10); + udelay(10); + if (aedsp16_test_dsp(port) == TRUE) { + DBG(("success.\n")); + return TRUE; + } else + DBG(("failure.\n")); + return FALSE; +} + +static int __init aedsp16_write(int port, int cmd) +{ + unsigned char ret; + int loop = HARDRETRY; + + DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd)); + + do { + ret = inb(port + DSP_STATUS); + /* + * DSP ready to receive data if bit 7 of ret == 0 + */ + if (!(ret & 0x80)) { + outb(cmd, port + DSP_COMMAND); + DBG(("success.\n")); + return 0; + } + } while (loop--); + + DBG(("timeout.\n")); + printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd); + + return -1; +} + +#if defined(CONFIG_SC6600) + +#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) +void __init aedsp16_pinfo(void) { + DBG(("\n Base address: %x\n", decoded_hcfg.iobase)); + DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not")); + DBG((" WSS addr : %x\n", decoded_hcfg.wssbase)); + DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase)); + DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not")); + DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase)); +} +#endif + +static void __init aedsp16_hard_decode(void) { + + DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); + +/* + * Decode Cfg Bytes. + */ + decoded_hcfg.iobase = IOBASE(hard_cfg[0]); + decoded_hcfg.joystick = JOY(hard_cfg[0]); + decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]); + decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]); + decoded_hcfg.cdrom = CDROM(hard_cfg[1]); + decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]); + +#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) + printk(" Original sound card configuration:\n"); + aedsp16_pinfo(); +#endif + +/* + * Now set up the real kernel configuration. + */ + decoded_hcfg.iobase = ae_config.base_io; + decoded_hcfg.wssbase = ae_config.mss_base; + decoded_hcfg.mpubase = ae_config.mpu_base; + +#if defined(CONFIG_SC6600_JOY) + decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */ +#endif +#if defined(CONFIG_SC6600_CDROM) + decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */ +#endif +#if defined(CONFIG_SC6600_CDROMBASE) + decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */ +#endif + +#if defined(AEDSP16_DEBUG) + DBG((" New Values:\n")); + aedsp16_pinfo(); +#endif + + DBG(("success.\n")); +} + +static void __init aedsp16_hard_encode(void) { + + DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); + + hard_cfg[0] = 0; + hard_cfg[1] = 0; + + hard_cfg[0] |= 0x20; + + BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase); + BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase); + BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase); + BLDJOY(hard_cfg[0], decoded_hcfg.joystick); + BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom); + BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase); + +#if defined(AEDSP16_DEBUG) + aedsp16_pinfo(); +#endif + + DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); + DBG(("success.\n")); + +} + +static int __init aedsp16_hard_write(int port) { + + DBG(("aedsp16_hard_write:\n")); + + if (aedsp16_write(port, COMMAND_6C)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C); + DBG(("failure.\n")); + return FALSE; + } + if (aedsp16_write(port, COMMAND_5C)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); + DBG(("failure.\n")); + return FALSE; + } + if (aedsp16_write(port, hard_cfg[0])) { + printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]); + DBG(("failure.\n")); + return FALSE; + } + if (aedsp16_write(port, hard_cfg[1])) { + printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]); + DBG(("failure.\n")); + return FALSE; + } + if (aedsp16_write(port, COMMAND_C5)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5); + DBG(("failure.\n")); + return FALSE; + } + + DBG(("success.\n")); + + return TRUE; +} + +static int __init aedsp16_hard_read(int port) { + + DBG(("aedsp16_hard_read:\n")); + + if (aedsp16_write(port, READ_HARD_CFG)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG); + DBG(("failure.\n")); + return FALSE; + } + + if ((hard_cfg[0] = aedsp16_read(port)) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", + READ_HARD_CFG); + DBG(("failure.\n")); + return FALSE; + } + if ((hard_cfg[1] = aedsp16_read(port)) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", + READ_HARD_CFG); + DBG(("failure.\n")); + return FALSE; + } + if (aedsp16_read(port) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", + READ_HARD_CFG); + DBG(("failure.\n")); + return FALSE; + } + + DBG(("success.\n")); + + return TRUE; +} + +static int __init aedsp16_ext_cfg_write(int port) { + + int extcfg, val; + + if (aedsp16_write(port, COMMAND_66)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66); + return FALSE; + } + + extcfg = 7; + if (decoded_hcfg.cdrom != 2) + extcfg = 0x0F; + if ((decoded_hcfg.cdrom == 4) || + (decoded_hcfg.cdrom == 3)) + extcfg &= ~2; + if (decoded_hcfg.cdrombase == 0) + extcfg &= ~2; + if (decoded_hcfg.mpubase == 0) + extcfg &= ~1; + + if (aedsp16_write(port, extcfg)) { + printk("[AEDSP16] Write extcfg: failed!\n"); + return FALSE; + } + if (aedsp16_write(port, 0)) { + printk("[AEDSP16] Write extcfg: failed!\n"); + return FALSE; + } + if (decoded_hcfg.cdrom == 3) { + if (aedsp16_write(port, COMMAND_52)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); + return FALSE; + } + if ((val = aedsp16_read(port)) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n" + , COMMAND_52); + return FALSE; + } + val &= 0x7F; + if (aedsp16_write(port, COMMAND_60)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); + return FALSE; + } + if (aedsp16_write(port, val)) { + printk("[AEDSP16] Write val: failed!\n"); + return FALSE; + } + } + + return TRUE; +} + +#endif /* CONFIG_SC6600 */ + +static int __init aedsp16_cfg_write(int port) { + if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); + return FALSE; + } + if (aedsp16_write(port, soft_cfg)) { + printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n"); + return FALSE; + } + return TRUE; +} + +static int __init aedsp16_init_mss(int port) +{ + DBG(("aedsp16_init_mss:\n")); + + mdelay(10); + + if (aedsp16_write(port, DSP_INIT_MSS)) { + printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n", + DSP_INIT_MSS); + DBG(("failure.\n")); + return FALSE; + } + + mdelay(10); + + if (aedsp16_cfg_write(port) == FALSE) + return FALSE; + + outb(soft_cfg_mss, ae_config.mss_base); + + DBG(("success.\n")); + + return TRUE; +} + +static int __init aedsp16_setup_board(int port) { + int loop = RETRY; + +#if defined(CONFIG_SC6600) + int val = 0; + + if (aedsp16_hard_read(port) == FALSE) { + printk("[AEDSP16] aedsp16_hard_read: failed!\n"); + return FALSE; + } + + if (aedsp16_write(port, COMMAND_52)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); + return FALSE; + } + + if ((val = aedsp16_read(port)) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", + COMMAND_52); + return FALSE; + } +#endif + + do { + if (aedsp16_write(port, COMMAND_88)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88); + return FALSE; + } + mdelay(10); + } while ((aedsp16_wait_data(port) == FALSE) && loop--); + + if (aedsp16_read(port) == -1) { + printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", + COMMAND_88); + return FALSE; + } + +#if !defined(CONFIG_SC6600) + if (aedsp16_write(port, COMMAND_5C)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); + return FALSE; + } +#endif + + if (aedsp16_cfg_write(port) == FALSE) + return FALSE; + +#if defined(CONFIG_SC6600) + if (aedsp16_write(port, COMMAND_60)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); + return FALSE; + } + if (aedsp16_write(port, val)) { + printk("[AEDSP16] DATA 0x%x: failed!\n", val); + return FALSE; + } + if (aedsp16_write(port, COMMAND_6E)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E); + return FALSE; + } + if (aedsp16_write(port, ver[0])) { + printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]); + return FALSE; + } + if (aedsp16_write(port, ver[1])) { + printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]); + return FALSE; + } + + if (aedsp16_hard_write(port) == FALSE) { + printk("[AEDSP16] aedsp16_hard_write: failed!\n"); + return FALSE; + } + + if (aedsp16_write(port, COMMAND_5C)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); + return FALSE; + } + +#if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET) + if (aedsp16_cfg_write(port) == FALSE) + return FALSE; +#endif + +#endif + + return TRUE; +} + +static int __init aedsp16_stdcfg(int port) { + if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); + return FALSE; + } + /* + * 0x0A == (IRQ 7, DMA 1, MIRQ 0) + */ + if (aedsp16_write(port, 0x0A)) { + printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); + return FALSE; + } + return TRUE; +} + +static int __init aedsp16_dsp_version(int port) +{ + int len = 0; + int ret; + + DBG(("Get DSP Version:\n")); + + if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION); + DBG(("failed.\n")); + return FALSE; + } + + do { + if ((ret = aedsp16_read(port)) == -1) { + DBG(("failed.\n")); + return FALSE; + } + /* + * We already know how many int are stored (2), so we know when the + * string is finished. + */ + ver[len++] = ret; + } while (len < CARDVERLEN); + sprintf(DSPVersion, "%d.%d", ver[0], ver[1]); + + DBG(("success.\n")); + + return TRUE; +} + +static int __init aedsp16_dsp_copyright(int port) +{ + int len = 0; + int ret; + + DBG(("Get DSP Copyright:\n")); + + if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) { + printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT); + DBG(("failed.\n")); + return FALSE; + } + + do { + if ((ret = aedsp16_read(port)) == -1) { + /* + * If no more data available, return to the caller, no error if len>0. + * We have no other way to know when the string is finished. + */ + if (len) + break; + else { + DBG(("failed.\n")); + return FALSE; + } + } + + DSPCopyright[len++] = ret; + + } while (len < CARDNAMELEN); + + DBG(("success.\n")); + + return TRUE; +} + +static void __init aedsp16_init_tables(void) +{ + int i = 0; + + memset(DSPCopyright, 0, CARDNAMELEN + 1); + memset(DSPVersion, 0, CARDVERLEN + 1); + + for (i = 0; orIRQ[i].or; i++) + if (orIRQ[i].val == ae_config.irq) { + soft_cfg |= orIRQ[i].or; + soft_cfg_mss |= orIRQ[i].or; + } + + for (i = 0; orMIRQ[i].or; i++) + if (orMIRQ[i].or == ae_config.mpu_irq) + soft_cfg |= orMIRQ[i].or; + + for (i = 0; orDMA[i].or; i++) + if (orDMA[i].val == ae_config.dma) { + soft_cfg |= orDMA[i].or; + soft_cfg_mss |= orDMA[i].or; + } +} + +static int __init aedsp16_init_board(void) +{ + aedsp16_init_tables(); + + if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_dsp_reset: failed!\n"); + return FALSE; + } + if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n"); + return FALSE; + } + + /* + * My AEDSP16 card return SC-6000 in DSPCopyright, so + * if we have something different, we have to be warned. + */ + if (strcmp("SC-6000", DSPCopyright)) + printk("[AEDSP16] Warning: non SC-6000 audio card!\n"); + + if (aedsp16_dsp_version(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_dsp_version: failed!\n"); + return FALSE; + } + + if (aedsp16_stdcfg(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); + return FALSE; + } + +#if defined(CONFIG_SC6600) + if (aedsp16_hard_read(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_hard_read: failed!\n"); + return FALSE; + } + + aedsp16_hard_decode(); + + aedsp16_hard_encode(); + + if (aedsp16_hard_write(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_hard_write: failed!\n"); + return FALSE; + } + + if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n"); + return FALSE; + } +#endif /* CONFIG_SC6600 */ + + if (aedsp16_setup_board(ae_config.base_io) == FALSE) { + printk("[AEDSP16] aedsp16_setup_board: failed!\n"); + return FALSE; + } + + if (ae_config.mss_base != -1) { + if (ae_config.init & INIT_MSS) { + if (aedsp16_init_mss(ae_config.base_io) == FALSE) { + printk("[AEDSP16] Can not initialize" + "Microsoft Sound System mode.\n"); + return FALSE; + } + } + } + +#if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) + + printk("Audio Excel DSP 16 init v%s (%s %s) [", + VERSION, DSPCopyright, + DSPVersion); + + if (ae_config.mpu_base != -1) { + if (ae_config.init & INIT_MPU401) { + printk("MPU401"); + if ((ae_config.init & INIT_MSS) || + (ae_config.init & INIT_SBPRO)) + printk(" "); + } + } + + if (ae_config.mss_base == -1) { + if (ae_config.init & INIT_SBPRO) { + printk("SBPro"); + if (ae_config.init & INIT_MSS) + printk(" "); + } + } + + if (ae_config.mss_base != -1) + if (ae_config.init & INIT_MSS) + printk("MSS"); + + printk("]\n"); +#endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */ + + mdelay(10); + + return TRUE; +} + +static int __init init_aedsp16_sb(void) +{ + DBG(("init_aedsp16_sb: ")); + +/* + * If the card is already init'ed MSS, we can not init it to SBPRO too + * because the board can not emulate simultaneously MSS and SBPRO. + */ + if (ae_config.init & INIT_MSS) + return FALSE; + if (ae_config.init & INIT_SBPRO) + return FALSE; + + ae_config.init |= INIT_SBPRO; + + DBG(("done.\n")); + + return TRUE; +} + +static void uninit_aedsp16_sb(void) +{ + DBG(("uninit_aedsp16_sb: ")); + + ae_config.init &= ~INIT_SBPRO; + + DBG(("done.\n")); +} + +static int __init init_aedsp16_mss(void) +{ + DBG(("init_aedsp16_mss: ")); + +/* + * If the card is already init'ed SBPRO, we can not init it to MSS too + * because the board can not emulate simultaneously MSS and SBPRO. + */ + if (ae_config.init & INIT_SBPRO) + return FALSE; + if (ae_config.init & INIT_MSS) + return FALSE; +/* + * We must allocate the CONFIG_AEDSP16_BASE region too because these are the + * I/O ports to access card's control registers. + */ + if (!(ae_config.init & INIT_MPU401)) { + if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, + "aedsp16 (base)")) { + printk( + "AEDSP16 BASE I/O port region is already in use.\n"); + return FALSE; + } + } + + ae_config.init |= INIT_MSS; + + DBG(("done.\n")); + + return TRUE; +} + +static void uninit_aedsp16_mss(void) +{ + DBG(("uninit_aedsp16_mss: ")); + + if ((!(ae_config.init & INIT_MPU401)) && + (ae_config.init & INIT_MSS)) { + release_region(ae_config.base_io, IOBASE_REGION_SIZE); + DBG(("AEDSP16 base region released.\n")); + } + + ae_config.init &= ~INIT_MSS; + DBG(("done.\n")); +} + +static int __init init_aedsp16_mpu(void) +{ + DBG(("init_aedsp16_mpu: ")); + + if (ae_config.init & INIT_MPU401) + return FALSE; + +/* + * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O + * ports to access card's control registers. + */ + if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) { + if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, + "aedsp16 (base)")) { + printk( + "AEDSP16 BASE I/O port region is already in use.\n"); + return FALSE; + } + } + + ae_config.init |= INIT_MPU401; + + DBG(("done.\n")); + + return TRUE; +} + +static void uninit_aedsp16_mpu(void) +{ + DBG(("uninit_aedsp16_mpu: ")); + + if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) && + (ae_config.init & INIT_MPU401)) { + release_region(ae_config.base_io, IOBASE_REGION_SIZE); + DBG(("AEDSP16 base region released.\n")); + } + + ae_config.init &= ~INIT_MPU401; + + DBG(("done.\n")); +} + +static int __init init_aedsp16(void) +{ + int initialized = FALSE; + + DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n", + ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq)); + + if (ae_config.mss_base == -1) { + if (init_aedsp16_sb() == FALSE) { + uninit_aedsp16_sb(); + } else { + initialized = TRUE; + } + } + + if (ae_config.mpu_base != -1) { + if (init_aedsp16_mpu() == FALSE) { + uninit_aedsp16_mpu(); + } else { + initialized = TRUE; + } + } + +/* + * In the sequence of init routines, the MSS init MUST be the last! + * This because of the special register programming the MSS mode needs. + * A board reset would disable the MSS mode restoring the default SBPRO + * mode. + */ + if (ae_config.mss_base != -1) { + if (init_aedsp16_mss() == FALSE) { + uninit_aedsp16_mss(); + } else { + initialized = TRUE; + } + } + + if (initialized) + initialized = aedsp16_init_board(); + return initialized; +} + +static void __exit uninit_aedsp16(void) +{ + if (ae_config.mss_base != -1) + uninit_aedsp16_mss(); + else + uninit_aedsp16_sb(); + if (ae_config.mpu_base != -1) + uninit_aedsp16_mpu(); +} + +static int __initdata io = -1; +static int __initdata irq = -1; +static int __initdata dma = -1; +static int __initdata mpu_irq = -1; +static int __initdata mss_base = -1; +static int __initdata mpu_base = -1; + +module_param(io, int, 0); +MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); +module_param(irq, int, 0); +MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); +module_param(dma, int, 0); +MODULE_PARM_DESC(dma, "dma line (0 1 3)"); +module_param(mpu_irq, int, 0); +MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); +module_param(mss_base, int, 0); +MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); +module_param(mpu_base, int, 0); +MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); +MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>"); +MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); +MODULE_LICENSE("GPL"); + +static int __init do_init_aedsp16(void) { + printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n"); + if (io == -1 || dma == -1 || irq == -1) { + printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n"); + return -EINVAL; + } + + ae_config.base_io = io; + ae_config.irq = irq; + ae_config.dma = dma; + + ae_config.mss_base = mss_base; + ae_config.mpu_base = mpu_base; + ae_config.mpu_irq = mpu_irq; + + if (init_aedsp16() == FALSE) { + printk(KERN_ERR "aedsp16: initialization failed\n"); + /* + * XXX + * What error should we return here ? + */ + return -EINVAL; + } + return 0; +} + +static void __exit cleanup_aedsp16(void) { + uninit_aedsp16(); +} + +module_init(do_init_aedsp16); +module_exit(cleanup_aedsp16); + +#ifndef MODULE +static int __init setup_aedsp16(char *str) +{ + /* io, irq, dma, mss_io, mpu_io, mpu_irq */ + int ints[7]; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + io = ints[1]; + irq = ints[2]; + dma = ints[3]; + mss_base = ints[4]; + mpu_base = ints[5]; + mpu_irq = ints[6]; + return 1; +} + +__setup("aedsp16=", setup_aedsp16); +#endif |