summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 17:26:42 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 17:26:42 -0700
commit7fe0b14b725d6d09a1d9e1409bd465cb88b587f9 (patch)
tree89b5ffca03145618da92c75fb3cc1dda87dbb924 /include
parent7a9a2970b5c1c2ce73d4bb84edaa7ebf13e0c841 (diff)
parent536a53a300d0d40152796eefb0a9e6e36ca37f7d (diff)
downloadtalos-op-linux-7fe0b14b725d6d09a1d9e1409bd465cb88b587f9.tar.gz
talos-op-linux-7fe0b14b725d6d09a1d9e1409bd465cb88b587f9.zip
Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc
Pull spi updates from Mark Brown: "No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022." Pulling from Mark Brown as Grant Likely is still busy moving. * tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits) spi: remove completely broken Tegra driver spi/imx: set the inactive state of the clock according to the clock polarity spi/pl022: get/put resources on suspend/resume spi/pl022: use more managed resources spi/pl022: Devicetree support w/o platform data spi/s3c64xx: Don't free controller_data on non-dt platforms spi: omap2-mcspi: add pinctrl support spi/pl022: adopt pinctrl support spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function spi/gpio: Fix stub for spi_gpio_probe_dt() spi/mxs: Make the SPI block clock speed configurable via DT spi: spi-sh-hspi: drop frees of devm_ alloc'd data spi/pl022: Fix chipselects pointer computation spi: spi-tle62x0: Use module_spi_driver macro mxs/spi: Rework the mxs_ssp_timeout to be more readable mxs/spi: Decrement the DMA/PIO border mxs/spi: Increment the transfer length only if transfer succeeded mxs/spi: Fix issues when doing long continuous transfer spi: spi-gpio: Add DT bindings spi: spi-gpio: store chipselect information in private structure ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/amba/pl022.h2
-rw-r--r--include/linux/platform_data/sc18is602.h19
-rw-r--r--include/linux/spi/mxs-spi.h150
3 files changed, 171 insertions, 0 deletions
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index fe1d7b283cb6..854b7294f6c6 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -244,6 +244,7 @@ struct dma_chan;
* indicates no delay and the device will be suspended immediately.
* @rt: indicates the controller should run the message pump with realtime
* priority to minimise the transfer latency on the bus.
+ * @chipselects: list of <num_chipselects> chip select gpios
*/
struct pl022_ssp_controller {
u16 bus_id;
@@ -254,6 +255,7 @@ struct pl022_ssp_controller {
void *dma_tx_param;
int autosuspend_delay;
bool rt;
+ int *chipselects;
};
/**
diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h
new file mode 100644
index 000000000000..997b06634152
--- /dev/null
+++ b/include/linux/platform_data/sc18is602.h
@@ -0,0 +1,19 @@
+/*
+ * Platform data for NXP SC18IS602/603
+ *
+ * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/spi/sc18is602 file.
+ */
+
+/**
+ * struct sc18is602_platform_data - sc18is602 info
+ * @clock_frequency SC18IS603 oscillator frequency
+ */
+struct sc18is602_platform_data {
+ u32 clock_frequency;
+};
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
new file mode 100644
index 000000000000..61ae1306db23
--- /dev/null
+++ b/include/linux/spi/mxs-spi.h
@@ -0,0 +1,150 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#include <linux/fsl/mxs-dma.h>
+
+#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
+
+/* SSP registers */
+#define HW_SSP_CTRL0 0x000
+#define BM_SSP_CTRL0_RUN (1 << 29)
+#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_LOCK_CS (1 << 27)
+#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define BM_SSP_CTRL0_READ (1 << 25)
+#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
+#define BM_SSP_CTRL0_GET_RESP (1 << 17)
+#define BM_SSP_CTRL0_ENABLE (1 << 16)
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_XFER_COUNT 0xffff
+#define HW_SSP_CMD0 0x010
+#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_CMD 0xff
+#define HW_SSP_CMD1 0x020
+#define HW_SSP_XFER_SIZE 0x030
+#define HW_SSP_BLOCK_SIZE 0x040
+#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
+#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
+#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
+#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
+#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
+#define BP_SSP_TIMING_TIMEOUT 16
+#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \
+ (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v) \
+ (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
+#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
+#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_PHASE (1 << 10)
+#define BM_SSP_CTRL1_POLARITY (1 << 9)
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BF_SSP_CTRL1_WORD_LENGTH(v) \
+ (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3
+#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7
+#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define BF_SSP_CTRL1_SSP_MODE(v) \
+ (((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0
+#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1
+#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3
+#define BV_SSP_CTRL1_SSP_MODE__MS 0x4
+
+#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090)
+
+#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
+#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
+#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5)
+
+#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM 3
+
+enum mxs_ssp_id {
+ IMX23_SSP,
+ IMX28_SSP,
+};
+
+struct mxs_ssp {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ unsigned int clk_rate;
+ enum mxs_ssp_id devid;
+
+ int dma_channel;
+ struct dma_chan *dmach;
+ struct mxs_dma_data dma_data;
+ unsigned int dma_dir;
+ enum dma_transfer_direction slave_dirn;
+ u32 ssp_pio_words[SSP_PIO_NUM];
+};
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
+#endif /* __LINUX_SPI_MXS_SPI_H__ */
OpenPOWER on IntegriCloud