Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

18 files changed, 846 insertions, 29 deletions

diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index fccc3002f271..91dd3ef63e99 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -7,6 +7,7 @@
 #ifndef MFD_AB8500_H
 #define MFD_AB8500_H
 
+#include <linux/atomic.h>
 #include <linux/mutex.h>
 
 struct device;
@@ -194,6 +195,14 @@ enum ab8500_version {
 #define AB9540_INT_GPIO52F		123
 #define AB9540_INT_GPIO53F		124
 #define AB9540_INT_GPIO54F		125 /* not 8505 */
+/* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */
+#define AB8505_INT_KEYSTUCK		128
+#define AB8505_INT_IKR			129
+#define AB8505_INT_IKP			130
+#define AB8505_INT_KP			131
+#define AB8505_INT_KEYDEGLITCH		132
+#define AB8505_INT_MODPWRSTATUSF	134
+#define AB8505_INT_MODPWRSTATUSR	135
 
 /*
  * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
@@ -203,8 +212,8 @@ enum ab8500_version {
  * which is larger.
  */
 #define AB8500_NR_IRQS			112
-#define AB8505_NR_IRQS			128
-#define AB9540_NR_IRQS			128
+#define AB8505_NR_IRQS			136
+#define AB9540_NR_IRQS			136
 /* This is set to the roof of any AB8500 chip variant IRQ counts */
 #define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
 
@@ -216,6 +225,7 @@ enum ab8500_version {
  * @dev: parent device
  * @lock: read/write operations lock
  * @irq_lock: genirq bus lock
+ * @transfer_ongoing: 0 if no transfer ongoing
  * @irq: irq line
  * @version: chip version id (e.g. ab8500 or ab9540)
  * @chip_id: chip revision id
@@ -234,7 +244,7 @@ struct ab8500 {
 	struct device	*dev;
 	struct mutex	lock;
 	struct mutex	irq_lock;
-
+	atomic_t	transfer_ongoing;
 	int		irq_base;
 	int		irq;
 	enum ab8500_version version;
@@ -280,6 +290,8 @@ extern int __devinit ab8500_init(struct ab8500 *ab8500,
 				 enum ab8500_version version);
 extern int __devexit ab8500_exit(struct ab8500 *ab8500);
 
+extern int ab8500_suspend(struct ab8500 *ab8500);
+
 static inline int is_ab8500(struct ab8500 *ab)
 {
 	return ab->version == AB8500_VERSION_AB8500;
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
index 22c1007d3ec5..7f92acf03d9e 100644
--- a/include/linux/mfd/anatop.h
+++ b/include/linux/mfd/anatop.h
@@ -34,7 +34,7 @@ struct anatop {
 	spinlock_t reglock;
 };
 
-extern u32 anatop_get_bits(struct anatop *, u32, int, int);
-extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
+extern u32 anatop_read_reg(struct anatop *, u32);
+extern void anatop_write_reg(struct anatop *, u32, u32, u32);
 
 #endif /*  __LINUX_MFD_ANATOP_H */
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index ef6faa5cee46..e1148d037e7b 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -31,6 +31,8 @@ struct asic3_platform_data {
 
 	unsigned int gpio_base;
 
+	unsigned int clock_rate;
+
 	struct asic3_led *leds;
 };
 
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 8313cd9658e3..0507c4c21a7d 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -33,6 +33,18 @@
 
 #include <linux/mfd/da9052/reg.h>
 
+/* Common - HWMON Channel Definations */
+#define DA9052_ADC_VDDOUT	0
+#define DA9052_ADC_ICH		1
+#define DA9052_ADC_TBAT	2
+#define DA9052_ADC_VBAT	3
+#define DA9052_ADC_IN4		4
+#define DA9052_ADC_IN5		5
+#define DA9052_ADC_IN6		6
+#define DA9052_ADC_TSI		7
+#define DA9052_ADC_TJUNC	8
+#define DA9052_ADC_VBBAT	9
+
 #define DA9052_IRQ_DCIN	0
 #define DA9052_IRQ_VBUS	1
 #define DA9052_IRQ_DCINREM	2
@@ -79,6 +91,9 @@ struct da9052 {
 	struct device *dev;
 	struct regmap *regmap;
 
+	struct mutex auxadc_lock;
+	struct completion done;
+
 	int irq_base;
 	struct regmap_irq_chip_data *irq_data;
 	u8 chip_id;
@@ -86,6 +101,10 @@ struct da9052 {
 	int chip_irq;
 };
 
+/* ADC API */
+int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel);
+int da9052_adc_read_temp(struct da9052 *da9052);
+
 /* Device I/O API */
 static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg)
 {
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
new file mode 100644
index 000000000000..594bc591f256
--- /dev/null
+++ b/include/linux/mfd/lm3533.h
@@ -0,0 +1,104 @@
+/*
+ * lm3533.h -- LM3533 interface
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_LM3533_H
+#define __LINUX_MFD_LM3533_H
+
+#define LM3533_ATTR_RO(_name) \
+	DEVICE_ATTR(_name, S_IRUGO, show_##_name, NULL)
+#define LM3533_ATTR_RW(_name) \
+	DEVICE_ATTR(_name, S_IRUGO | S_IWUSR , show_##_name, store_##_name)
+
+struct device;
+struct regmap;
+
+struct lm3533 {
+	struct device *dev;
+
+	struct regmap *regmap;
+
+	int gpio_hwen;
+	int irq;
+
+	unsigned have_als:1;
+	unsigned have_backlights:1;
+	unsigned have_leds:1;
+};
+
+struct lm3533_ctrlbank {
+	struct lm3533 *lm3533;
+	struct device *dev;
+	int id;
+};
+
+struct lm3533_als_platform_data {
+	unsigned pwm_mode:1;		/* PWM input mode (default analog) */
+	u8 r_select;			/* 1 - 127 (ignored in PWM-mode) */
+};
+
+struct lm3533_bl_platform_data {
+	char *name;
+	u16 max_current;		/* 5000 - 29800 uA (800 uA step) */
+	u8 default_brightness;		/* 0 - 255 */
+	u8 pwm;				/* 0 - 0x3f */
+};
+
+struct lm3533_led_platform_data {
+	char *name;
+	const char *default_trigger;
+	u16 max_current;		/* 5000 - 29800 uA (800 uA step) */
+	u8 pwm;				/* 0 - 0x3f */
+};
+
+enum lm3533_boost_freq {
+	LM3533_BOOST_FREQ_500KHZ,
+	LM3533_BOOST_FREQ_1000KHZ,
+};
+
+enum lm3533_boost_ovp {
+	LM3533_BOOST_OVP_16V,
+	LM3533_BOOST_OVP_24V,
+	LM3533_BOOST_OVP_32V,
+	LM3533_BOOST_OVP_40V,
+};
+
+struct lm3533_platform_data {
+	int gpio_hwen;
+
+	enum lm3533_boost_ovp boost_ovp;
+	enum lm3533_boost_freq boost_freq;
+
+	struct lm3533_als_platform_data *als;
+
+	struct lm3533_bl_platform_data *backlights;
+	int num_backlights;
+
+	struct lm3533_led_platform_data *leds;
+	int num_leds;
+};
+
+extern int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
+extern int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
+
+extern int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val);
+extern int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val);
+extern int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb,
+								u16 imax);
+extern int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val);
+extern int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val);
+
+extern int lm3533_read(struct lm3533 *lm3533, u8 reg, u8 *val);
+extern int lm3533_write(struct lm3533 *lm3533, u8 reg, u8 val);
+extern int lm3533_update(struct lm3533 *lm3533, u8 reg, u8 val, u8 mask);
+
+#endif	/* __LINUX_MFD_LM3533_H */
diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h
new file mode 100644
index 000000000000..fec5256c3f5d
--- /dev/null
+++ b/include/linux/mfd/lpc_ich.h
@@ -0,0 +1,48 @@
+/*
+ *  linux/drivers/mfd/lpc_ich.h
+ *
+ *  Copyright (c) 2012 Extreme Engineering Solution, Inc.
+ *  Author: Aaron Sierra <asierra@xes-inc.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef LPC_ICH_H
+#define LPC_ICH_H
+
+/* Watchdog resources */
+#define ICH_RES_IO_TCO	0
+#define ICH_RES_IO_SMI	1
+#define ICH_RES_MEM_OFF	2
+#define ICH_RES_MEM_GCS	0
+
+/* GPIO resources */
+#define ICH_RES_GPIO	0
+#define ICH_RES_GPE0	1
+
+/* GPIO compatibility */
+#define ICH_I3100_GPIO		0x401
+#define ICH_V5_GPIO		0x501
+#define ICH_V6_GPIO		0x601
+#define ICH_V7_GPIO		0x701
+#define ICH_V9_GPIO		0x801
+#define ICH_V10CORP_GPIO	0xa01
+#define ICH_V10CONS_GPIO	0xa11
+
+struct lpc_ich_info {
+	char name[32];
+	unsigned int iTCO_version;
+	unsigned int gpio_version;
+};
+
+#endif
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
new file mode 100644
index 000000000000..68263c5fa53c
--- /dev/null
+++ b/include/linux/mfd/max77693-private.h
@@ -0,0 +1,227 @@
+/*
+ * max77693-private.h - Voltage regulator driver for the Maxim 77693
+ *
+ *  Copyright (C) 2012 Samsung Electrnoics
+ *  SangYoung Son <hello.son@samsung.com>
+ *
+ * This program is not provided / owned by Maxim Integrated Products.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX77693_PRIV_H
+#define __LINUX_MFD_MAX77693_PRIV_H
+
+#include <linux/i2c.h>
+
+#define MAX77693_NUM_IRQ_MUIC_REGS	3
+#define MAX77693_REG_INVALID		(0xff)
+
+/* Slave addr = 0xCC: PMIC, Charger, Flash LED */
+enum max77693_pmic_reg {
+	MAX77693_LED_REG_IFLASH1			= 0x00,
+	MAX77693_LED_REG_IFLASH2			= 0x01,
+	MAX77693_LED_REG_ITORCH				= 0x02,
+	MAX77693_LED_REG_ITORCHTIMER			= 0x03,
+	MAX77693_LED_REG_FLASH_TIMER			= 0x04,
+	MAX77693_LED_REG_FLASH_EN			= 0x05,
+	MAX77693_LED_REG_MAX_FLASH1			= 0x06,
+	MAX77693_LED_REG_MAX_FLASH2			= 0x07,
+	MAX77693_LED_REG_MAX_FLASH3			= 0x08,
+	MAX77693_LED_REG_MAX_FLASH4			= 0x09,
+	MAX77693_LED_REG_VOUT_CNTL			= 0x0A,
+	MAX77693_LED_REG_VOUT_FLASH1			= 0x0B,
+	MAX77693_LED_REG_VOUT_FLASH2			= 0x0C,
+	MAX77693_LED_REG_FLASH_INT			= 0x0E,
+	MAX77693_LED_REG_FLASH_INT_MASK			= 0x0F,
+	MAX77693_LED_REG_FLASH_INT_STATUS		= 0x10,
+
+	MAX77693_PMIC_REG_PMIC_ID1			= 0x20,
+	MAX77693_PMIC_REG_PMIC_ID2			= 0x21,
+	MAX77693_PMIC_REG_INTSRC			= 0x22,
+	MAX77693_PMIC_REG_INTSRC_MASK			= 0x23,
+	MAX77693_PMIC_REG_TOPSYS_INT			= 0x24,
+	MAX77693_PMIC_REG_TOPSYS_INT_MASK		= 0x26,
+	MAX77693_PMIC_REG_TOPSYS_STAT			= 0x28,
+	MAX77693_PMIC_REG_MAINCTRL1			= 0x2A,
+	MAX77693_PMIC_REG_LSCNFG			= 0x2B,
+
+	MAX77693_CHG_REG_CHG_INT			= 0xB0,
+	MAX77693_CHG_REG_CHG_INT_MASK			= 0xB1,
+	MAX77693_CHG_REG_CHG_INT_OK			= 0xB2,
+	MAX77693_CHG_REG_CHG_DETAILS_00			= 0xB3,
+	MAX77693_CHG_REG_CHG_DETAILS_01			= 0xB4,
+	MAX77693_CHG_REG_CHG_DETAILS_02			= 0xB5,
+	MAX77693_CHG_REG_CHG_DETAILS_03			= 0xB6,
+	MAX77693_CHG_REG_CHG_CNFG_00			= 0xB7,
+	MAX77693_CHG_REG_CHG_CNFG_01			= 0xB8,
+	MAX77693_CHG_REG_CHG_CNFG_02			= 0xB9,
+	MAX77693_CHG_REG_CHG_CNFG_03			= 0xBA,
+	MAX77693_CHG_REG_CHG_CNFG_04			= 0xBB,
+	MAX77693_CHG_REG_CHG_CNFG_05			= 0xBC,
+	MAX77693_CHG_REG_CHG_CNFG_06			= 0xBD,
+	MAX77693_CHG_REG_CHG_CNFG_07			= 0xBE,
+	MAX77693_CHG_REG_CHG_CNFG_08			= 0xBF,
+	MAX77693_CHG_REG_CHG_CNFG_09			= 0xC0,
+	MAX77693_CHG_REG_CHG_CNFG_10			= 0xC1,
+	MAX77693_CHG_REG_CHG_CNFG_11			= 0xC2,
+	MAX77693_CHG_REG_CHG_CNFG_12			= 0xC3,
+	MAX77693_CHG_REG_CHG_CNFG_13			= 0xC4,
+	MAX77693_CHG_REG_CHG_CNFG_14			= 0xC5,
+	MAX77693_CHG_REG_SAFEOUT_CTRL			= 0xC6,
+
+	MAX77693_PMIC_REG_END,
+};
+
+/* Slave addr = 0x4A: MUIC */
+enum max77693_muic_reg {
+	MAX77693_MUIC_REG_ID		= 0x00,
+	MAX77693_MUIC_REG_INT1		= 0x01,
+	MAX77693_MUIC_REG_INT2		= 0x02,
+	MAX77693_MUIC_REG_INT3		= 0x03,
+	MAX77693_MUIC_REG_STATUS1	= 0x04,
+	MAX77693_MUIC_REG_STATUS2	= 0x05,
+	MAX77693_MUIC_REG_STATUS3	= 0x06,
+	MAX77693_MUIC_REG_INTMASK1	= 0x07,
+	MAX77693_MUIC_REG_INTMASK2	= 0x08,
+	MAX77693_MUIC_REG_INTMASK3	= 0x09,
+	MAX77693_MUIC_REG_CDETCTRL1	= 0x0A,
+	MAX77693_MUIC_REG_CDETCTRL2	= 0x0B,
+	MAX77693_MUIC_REG_CTRL1		= 0x0C,
+	MAX77693_MUIC_REG_CTRL2		= 0x0D,
+	MAX77693_MUIC_REG_CTRL3		= 0x0E,
+
+	MAX77693_MUIC_REG_END,
+};
+
+/* Slave addr = 0x90: Haptic */
+enum max77693_haptic_reg {
+	MAX77693_HAPTIC_REG_STATUS		= 0x00,
+	MAX77693_HAPTIC_REG_CONFIG1		= 0x01,
+	MAX77693_HAPTIC_REG_CONFIG2		= 0x02,
+	MAX77693_HAPTIC_REG_CONFIG_CHNL		= 0x03,
+	MAX77693_HAPTIC_REG_CONFG_CYC1		= 0x04,
+	MAX77693_HAPTIC_REG_CONFG_CYC2		= 0x05,
+	MAX77693_HAPTIC_REG_CONFIG_PER1		= 0x06,
+	MAX77693_HAPTIC_REG_CONFIG_PER2		= 0x07,
+	MAX77693_HAPTIC_REG_CONFIG_PER3		= 0x08,
+	MAX77693_HAPTIC_REG_CONFIG_PER4		= 0x09,
+	MAX77693_HAPTIC_REG_CONFIG_DUTY1	= 0x0A,
+	MAX77693_HAPTIC_REG_CONFIG_DUTY2	= 0x0B,
+	MAX77693_HAPTIC_REG_CONFIG_PWM1		= 0x0C,
+	MAX77693_HAPTIC_REG_CONFIG_PWM2		= 0x0D,
+	MAX77693_HAPTIC_REG_CONFIG_PWM3		= 0x0E,
+	MAX77693_HAPTIC_REG_CONFIG_PWM4		= 0x0F,
+	MAX77693_HAPTIC_REG_REV			= 0x10,
+
+	MAX77693_HAPTIC_REG_END,
+};
+
+enum max77693_irq_source {
+	LED_INT = 0,
+	TOPSYS_INT,
+	CHG_INT,
+	MUIC_INT1,
+	MUIC_INT2,
+	MUIC_INT3,
+
+	MAX77693_IRQ_GROUP_NR,
+};
+
+enum max77693_irq {
+	/* PMIC - FLASH */
+	MAX77693_LED_IRQ_FLED2_OPEN,
+	MAX77693_LED_IRQ_FLED2_SHORT,
+	MAX77693_LED_IRQ_FLED1_OPEN,
+	MAX77693_LED_IRQ_FLED1_SHORT,
+	MAX77693_LED_IRQ_MAX_FLASH,
+
+	/* PMIC - TOPSYS */
+	MAX77693_TOPSYS_IRQ_T120C_INT,
+	MAX77693_TOPSYS_IRQ_T140C_INT,
+	MAX77693_TOPSYS_IRQ_LOWSYS_INT,
+
+	/* PMIC - Charger */
+	MAX77693_CHG_IRQ_BYP_I,
+	MAX77693_CHG_IRQ_THM_I,
+	MAX77693_CHG_IRQ_BAT_I,
+	MAX77693_CHG_IRQ_CHG_I,
+	MAX77693_CHG_IRQ_CHGIN_I,
+
+	/* MUIC INT1 */
+	MAX77693_MUIC_IRQ_INT1_ADC,
+	MAX77693_MUIC_IRQ_INT1_ADC_LOW,
+	MAX77693_MUIC_IRQ_INT1_ADC_ERR,
+	MAX77693_MUIC_IRQ_INT1_ADC1K,
+
+	/* MUIC INT2 */
+	MAX77693_MUIC_IRQ_INT2_CHGTYP,
+	MAX77693_MUIC_IRQ_INT2_CHGDETREUN,
+	MAX77693_MUIC_IRQ_INT2_DCDTMR,
+	MAX77693_MUIC_IRQ_INT2_DXOVP,
+	MAX77693_MUIC_IRQ_INT2_VBVOLT,
+	MAX77693_MUIC_IRQ_INT2_VIDRM,
+
+	/* MUIC INT3 */
+	MAX77693_MUIC_IRQ_INT3_EOC,
+	MAX77693_MUIC_IRQ_INT3_CGMBC,
+	MAX77693_MUIC_IRQ_INT3_OVP,
+	MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR,
+	MAX77693_MUIC_IRQ_INT3_CHG_ENABLED,
+	MAX77693_MUIC_IRQ_INT3_BAT_DET,
+
+	MAX77693_IRQ_NR,
+};
+
+struct max77693_dev {
+	struct device *dev;
+	struct i2c_client *i2c;		/* 0xCC , PMIC, Charger, Flash LED */
+	struct i2c_client *muic;	/* 0x4A , MUIC */
+	struct i2c_client *haptic;	/* 0x90 , Haptic */
+	struct mutex iolock;
+
+	int type;
+
+	struct regmap *regmap;
+	struct regmap *regmap_muic;
+	struct regmap *regmap_haptic;
+
+	struct irq_domain *irq_domain;
+
+	int irq;
+	int irq_gpio;
+	bool wakeup;
+	struct mutex irqlock;
+	int irq_masks_cur[MAX77693_IRQ_GROUP_NR];
+	int irq_masks_cache[MAX77693_IRQ_GROUP_NR];
+};
+
+enum max77693_types {
+	TYPE_MAX77693,
+};
+
+extern int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest);
+extern int max77693_bulk_read(struct regmap *map, u8 reg, int count,
+				u8 *buf);
+extern int max77693_write_reg(struct regmap *map, u8 reg, u8 value);
+extern int max77693_bulk_write(struct regmap *map, u8 reg, int count,
+				u8 *buf);
+extern int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask);
+
+extern int max77693_irq_init(struct max77693_dev *max77686);
+extern void max77693_irq_exit(struct max77693_dev *max77686);
+extern int max77693_irq_resume(struct max77693_dev *max77686);
+
+#endif /*  __LINUX_MFD_MAX77693_PRIV_H */
diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h
new file mode 100644
index 000000000000..1d28ae90384e
--- /dev/null
+++ b/include/linux/mfd/max77693.h
@@ -0,0 +1,36 @@
+/*
+ * max77693.h - Driver for the Maxim 77693
+ *
+ *  Copyright (C) 2012 Samsung Electrnoics
+ *  SangYoung Son <hello.son@samsung.com>
+ *
+ * This program is not provided / owned by Maxim Integrated Products.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * This driver is based on max8997.h
+ *
+ * MAX77693 has PMIC, Charger, Flash LED, Haptic, MUIC devices.
+ * The devices share the same I2C bus and included in
+ * this mfd driver.
+ */
+
+#ifndef __LINUX_MFD_MAX77693_H
+#define __LINUX_MFD_MAX77693_H
+
+struct max77693_platform_data {
+	int wakeup;
+};
+#endif	/* __LINUX_MFD_MAX77693_H */
diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h
new file mode 100644
index 000000000000..d179227e866f
--- /dev/null
+++ b/include/linux/mfd/sta2x11-mfd.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 2009-2011 Wind River Systems, Inc.
+ * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated
+ * functions in one PCI endpoint functions. This driver simply
+ * registers the platform devices in this iomemregion and exports a few
+ * functions to access common registers
+ */
+
+#ifndef __STA2X11_MFD_H
+#define __STA2X11_MFD_H
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/*
+ * The MFD PCI block includes the GPIO peripherals and other register blocks.
+ * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".)
+ */
+#define GSTA_GPIO_PER_BLOCK	32
+#define GSTA_NR_BLOCKS		4
+#define GSTA_NR_GPIO		(GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS)
+
+/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */
+struct sta2x11_gpio_pdata {
+	unsigned pinconfig[GSTA_NR_GPIO];
+};
+
+/* Macros below lifted from sh_pfc.h, with minor differences */
+#define PINMUX_TYPE_NONE		0
+#define PINMUX_TYPE_FUNCTION		1
+#define PINMUX_TYPE_OUTPUT_LOW		2
+#define PINMUX_TYPE_OUTPUT_HIGH		3
+#define PINMUX_TYPE_INPUT		4
+#define PINMUX_TYPE_INPUT_PULLUP	5
+#define PINMUX_TYPE_INPUT_PULLDOWN	6
+
+/* Give names to GPIO pins, like PXA does, taken from the manual */
+#define STA2X11_GPIO0			0
+#define STA2X11_GPIO1			1
+#define STA2X11_GPIO2			2
+#define STA2X11_GPIO3			3
+#define STA2X11_GPIO4			4
+#define STA2X11_GPIO5			5
+#define STA2X11_GPIO6			6
+#define STA2X11_GPIO7			7
+#define STA2X11_GPIO8_RGBOUT_RED7	8
+#define STA2X11_GPIO9_RGBOUT_RED6	9
+#define STA2X11_GPIO10_RGBOUT_RED5	10
+#define STA2X11_GPIO11_RGBOUT_RED4	11
+#define STA2X11_GPIO12_RGBOUT_RED3	12
+#define STA2X11_GPIO13_RGBOUT_RED2	13
+#define STA2X11_GPIO14_RGBOUT_RED1	14
+#define STA2X11_GPIO15_RGBOUT_RED0	15
+#define STA2X11_GPIO16_RGBOUT_GREEN7	16
+#define STA2X11_GPIO17_RGBOUT_GREEN6	17
+#define STA2X11_GPIO18_RGBOUT_GREEN5	18
+#define STA2X11_GPIO19_RGBOUT_GREEN4	19
+#define STA2X11_GPIO20_RGBOUT_GREEN3	20
+#define STA2X11_GPIO21_RGBOUT_GREEN2	21
+#define STA2X11_GPIO22_RGBOUT_GREEN1	22
+#define STA2X11_GPIO23_RGBOUT_GREEN0	23
+#define STA2X11_GPIO24_RGBOUT_BLUE7	24
+#define STA2X11_GPIO25_RGBOUT_BLUE6	25
+#define STA2X11_GPIO26_RGBOUT_BLUE5	26
+#define STA2X11_GPIO27_RGBOUT_BLUE4	27
+#define STA2X11_GPIO28_RGBOUT_BLUE3	28
+#define STA2X11_GPIO29_RGBOUT_BLUE2	29
+#define STA2X11_GPIO30_RGBOUT_BLUE1	30
+#define STA2X11_GPIO31_RGBOUT_BLUE0	31
+#define STA2X11_GPIO32_RGBOUT_VSYNCH	32
+#define STA2X11_GPIO33_RGBOUT_HSYNCH	33
+#define STA2X11_GPIO34_RGBOUT_DEN	34
+#define STA2X11_GPIO35_ETH_CRS_DV	35
+#define STA2X11_GPIO36_ETH_TXD1		36
+#define STA2X11_GPIO37_ETH_TXD0		37
+#define STA2X11_GPIO38_ETH_TX_EN	38
+#define STA2X11_GPIO39_MDIO		39
+#define STA2X11_GPIO40_ETH_REF_CLK	40
+#define STA2X11_GPIO41_ETH_RXD1		41
+#define STA2X11_GPIO42_ETH_RXD0		42
+#define STA2X11_GPIO43_MDC		43
+#define STA2X11_GPIO44_CAN_TX		44
+#define STA2X11_GPIO45_CAN_RX		45
+#define STA2X11_GPIO46_MLB_DAT		46
+#define STA2X11_GPIO47_MLB_SIG		47
+#define STA2X11_GPIO48_SPI0_CLK		48
+#define STA2X11_GPIO49_SPI0_TXD		49
+#define STA2X11_GPIO50_SPI0_RXD		50
+#define STA2X11_GPIO51_SPI0_FRM		51
+#define STA2X11_GPIO52_SPI1_CLK		52
+#define STA2X11_GPIO53_SPI1_TXD		53
+#define STA2X11_GPIO54_SPI1_RXD		54
+#define STA2X11_GPIO55_SPI1_FRM		55
+#define STA2X11_GPIO56_SPI2_CLK		56
+#define STA2X11_GPIO57_SPI2_TXD		57
+#define STA2X11_GPIO58_SPI2_RXD		58
+#define STA2X11_GPIO59_SPI2_FRM		59
+#define STA2X11_GPIO60_I2C0_SCL		60
+#define STA2X11_GPIO61_I2C0_SDA		61
+#define STA2X11_GPIO62_I2C1_SCL		62
+#define STA2X11_GPIO63_I2C1_SDA		63
+#define STA2X11_GPIO64_I2C2_SCL		64
+#define STA2X11_GPIO65_I2C2_SDA		65
+#define STA2X11_GPIO66_I2C3_SCL		66
+#define STA2X11_GPIO67_I2C3_SDA		67
+#define STA2X11_GPIO68_MSP0_RCK		68
+#define STA2X11_GPIO69_MSP0_RXD		69
+#define STA2X11_GPIO70_MSP0_RFS		70
+#define STA2X11_GPIO71_MSP0_TCK		71
+#define STA2X11_GPIO72_MSP0_TXD		72
+#define STA2X11_GPIO73_MSP0_TFS		73
+#define STA2X11_GPIO74_MSP0_SCK		74
+#define STA2X11_GPIO75_MSP1_CK		75
+#define STA2X11_GPIO76_MSP1_RXD		76
+#define STA2X11_GPIO77_MSP1_FS		77
+#define STA2X11_GPIO78_MSP1_TXD		78
+#define STA2X11_GPIO79_MSP2_CK		79
+#define STA2X11_GPIO80_MSP2_RXD		80
+#define STA2X11_GPIO81_MSP2_FS		81
+#define STA2X11_GPIO82_MSP2_TXD		82
+#define STA2X11_GPIO83_MSP3_CK		83
+#define STA2X11_GPIO84_MSP3_RXD		84
+#define STA2X11_GPIO85_MSP3_FS		85
+#define STA2X11_GPIO86_MSP3_TXD		86
+#define STA2X11_GPIO87_MSP4_CK		87
+#define STA2X11_GPIO88_MSP4_RXD		88
+#define STA2X11_GPIO89_MSP4_FS		89
+#define STA2X11_GPIO90_MSP4_TXD		90
+#define STA2X11_GPIO91_MSP5_CK		91
+#define STA2X11_GPIO92_MSP5_RXD		92
+#define STA2X11_GPIO93_MSP5_FS		93
+#define STA2X11_GPIO94_MSP5_TXD		94
+#define STA2X11_GPIO95_SDIO3_DAT3	95
+#define STA2X11_GPIO96_SDIO3_DAT2	96
+#define STA2X11_GPIO97_SDIO3_DAT1	97
+#define STA2X11_GPIO98_SDIO3_DAT0	98
+#define STA2X11_GPIO99_SDIO3_CLK	99
+#define STA2X11_GPIO100_SDIO3_CMD	100
+#define STA2X11_GPIO101			101
+#define STA2X11_GPIO102			102
+#define STA2X11_GPIO103			103
+#define STA2X11_GPIO104			104
+#define STA2X11_GPIO105_SDIO2_DAT3	105
+#define STA2X11_GPIO106_SDIO2_DAT2	106
+#define STA2X11_GPIO107_SDIO2_DAT1	107
+#define STA2X11_GPIO108_SDIO2_DAT0	108
+#define STA2X11_GPIO109_SDIO2_CLK	109
+#define STA2X11_GPIO110_SDIO2_CMD	110
+#define STA2X11_GPIO111			111
+#define STA2X11_GPIO112			112
+#define STA2X11_GPIO113			113
+#define STA2X11_GPIO114			114
+#define STA2X11_GPIO115_SDIO1_DAT3	115
+#define STA2X11_GPIO116_SDIO1_DAT2	116
+#define STA2X11_GPIO117_SDIO1_DAT1	117
+#define STA2X11_GPIO118_SDIO1_DAT0	118
+#define STA2X11_GPIO119_SDIO1_CLK	119
+#define STA2X11_GPIO120_SDIO1_CMD	120
+#define STA2X11_GPIO121			121
+#define STA2X11_GPIO122			122
+#define STA2X11_GPIO123			123
+#define STA2X11_GPIO124			124
+#define STA2X11_GPIO125_UART2_TXD	125
+#define STA2X11_GPIO126_UART2_RXD	126
+#define STA2X11_GPIO127_UART3_TXD	127
+
+/*
+ * The APB bridge has its own registers, needed by our users as well.
+ * They are accessed with the following read/mask/write function.
+ */
+u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val);
+
+/* CAN and MLB */
+#define APBREG_BSR	0x00	/* Bridge Status Reg */
+#define APBREG_PAER	0x08	/* Peripherals Address Error Reg */
+#define APBREG_PWAC	0x20	/* Peripheral Write Access Control reg */
+#define APBREG_PRAC	0x40	/* Peripheral Read Access Control reg */
+#define APBREG_PCG	0x60	/* Peripheral Clock Gating Reg */
+#define APBREG_PUR	0x80	/* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG	0xA0	/* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_CAN	(1 << 1)
+#define APBREG_MLB	(1 << 3)
+
+/* SARAC */
+#define APBREG_BSR_SARAC     0x100 /* Bridge Status Reg */
+#define APBREG_PAER_SARAC    0x108 /* Peripherals Address Error Reg */
+#define APBREG_PWAC_SARAC    0x120 /* Peripheral Write Access Control reg */
+#define APBREG_PRAC_SARAC    0x140 /* Peripheral Read Access Control reg */
+#define APBREG_PCG_SARAC     0x160 /* Peripheral Clock Gating Reg */
+#define APBREG_PUR_SARAC     0x180 /* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_SARAC	(1 << 2)
+
+/*
+ * The system controller has its own registers. Some of these are accessed
+ * by out users as well, using the following read/mask/write/function
+ */
+u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val);
+
+#define SCTL_SCCTL		0x00	/* System controller control register */
+#define SCTL_ARMCFG		0x04	/* ARM configuration register */
+#define SCTL_SCPLLCTL		0x08	/* PLL control status register */
+#define SCTL_SCPLLFCTRL		0x0c	/* PLL frequency control register */
+#define SCTL_SCRESFRACT		0x10	/* PLL fractional input register */
+#define SCTL_SCRESCTRL1		0x14	/* Peripheral reset control 1 */
+#define SCTL_SCRESXTRL2		0x18	/* Peripheral reset control 2 */
+#define SCTL_SCPEREN0		0x1c	/* Peripheral clock enable register 0 */
+#define SCTL_SCPEREN1		0x20	/* Peripheral clock enable register 1 */
+#define SCTL_SCPEREN2		0x24	/* Peripheral clock enable register 2 */
+#define SCTL_SCGRST		0x28	/* Peripheral global reset */
+#define SCTL_SCPCIPMCR1		0x30	/* PCI power management control 1 */
+#define SCTL_SCPCIPMCR2		0x34	/* PCI power management control 2 */
+#define SCTL_SCPCIPMSR1		0x38	/* PCI power management status 1 */
+#define SCTL_SCPCIPMSR2		0x3c	/* PCI power management status 2 */
+#define SCTL_SCPCIPMSR3		0x40	/* PCI power management status 3 */
+#define SCTL_SCINTREN		0x44	/* Interrupt enable */
+#define SCTL_SCRISR		0x48	/* RAW interrupt status */
+#define SCTL_SCCLKSTAT0		0x4c	/* Peripheral clocks status 0 */
+#define SCTL_SCCLKSTAT1		0x50	/* Peripheral clocks status 1 */
+#define SCTL_SCCLKSTAT2		0x54	/* Peripheral clocks status 2 */
+#define SCTL_SCRSTSTA		0x58	/* Reset status register */
+
+#define SCTL_SCRESCTRL1_USB_PHY_POR	(1 << 0)
+#define SCTL_SCRESCTRL1_USB_OTG	(1 << 1)
+#define SCTL_SCRESCTRL1_USB_HRST	(1 << 2)
+#define SCTL_SCRESCTRL1_USB_PHY_HOST	(1 << 3)
+#define SCTL_SCRESCTRL1_SATAII	(1 << 4)
+#define SCTL_SCRESCTRL1_VIP		(1 << 5)
+#define SCTL_SCRESCTRL1_PER_MMC0	(1 << 6)
+#define SCTL_SCRESCTRL1_PER_MMC1	(1 << 7)
+#define SCTL_SCRESCTRL1_PER_GPIO0	(1 << 8)
+#define SCTL_SCRESCTRL1_PER_GPIO1	(1 << 9)
+#define SCTL_SCRESCTRL1_PER_GPIO2	(1 << 10)
+#define SCTL_SCRESCTRL1_PER_GPIO3	(1 << 11)
+#define SCTL_SCRESCTRL1_PER_MTU0	(1 << 12)
+#define SCTL_SCRESCTRL1_KER_SPI0	(1 << 13)
+#define SCTL_SCRESCTRL1_KER_SPI1	(1 << 14)
+#define SCTL_SCRESCTRL1_KER_SPI2	(1 << 15)
+#define SCTL_SCRESCTRL1_KER_MCI0	(1 << 16)
+#define SCTL_SCRESCTRL1_KER_MCI1	(1 << 17)
+#define SCTL_SCRESCTRL1_PRE_HSI2C0	(1 << 18)
+#define SCTL_SCRESCTRL1_PER_HSI2C1	(1 << 19)
+#define SCTL_SCRESCTRL1_PER_HSI2C2	(1 << 20)
+#define SCTL_SCRESCTRL1_PER_HSI2C3	(1 << 21)
+#define SCTL_SCRESCTRL1_PER_MSP0	(1 << 22)
+#define SCTL_SCRESCTRL1_PER_MSP1	(1 << 23)
+#define SCTL_SCRESCTRL1_PER_MSP2	(1 << 24)
+#define SCTL_SCRESCTRL1_PER_MSP3	(1 << 25)
+#define SCTL_SCRESCTRL1_PER_MSP4	(1 << 26)
+#define SCTL_SCRESCTRL1_PER_MSP5	(1 << 27)
+#define SCTL_SCRESCTRL1_PER_MMC	(1 << 28)
+#define SCTL_SCRESCTRL1_KER_MSP0	(1 << 29)
+#define SCTL_SCRESCTRL1_KER_MSP1	(1 << 30)
+#define SCTL_SCRESCTRL1_KER_MSP2	(1 << 31)
+
+#define SCTL_SCPEREN0_UART0		(1 << 0)
+#define SCTL_SCPEREN0_UART1		(1 << 1)
+#define SCTL_SCPEREN0_UART2		(1 << 2)
+#define SCTL_SCPEREN0_UART3		(1 << 3)
+#define SCTL_SCPEREN0_MSP0		(1 << 4)
+#define SCTL_SCPEREN0_MSP1		(1 << 5)
+#define SCTL_SCPEREN0_MSP2		(1 << 6)
+#define SCTL_SCPEREN0_MSP3		(1 << 7)
+#define SCTL_SCPEREN0_MSP4		(1 << 8)
+#define SCTL_SCPEREN0_MSP5		(1 << 9)
+#define SCTL_SCPEREN0_SPI0		(1 << 10)
+#define SCTL_SCPEREN0_SPI1		(1 << 11)
+#define SCTL_SCPEREN0_SPI2		(1 << 12)
+#define SCTL_SCPEREN0_I2C0		(1 << 13)
+#define SCTL_SCPEREN0_I2C1		(1 << 14)
+#define SCTL_SCPEREN0_I2C2		(1 << 15)
+#define SCTL_SCPEREN0_I2C3		(1 << 16)
+#define SCTL_SCPEREN0_SVDO_LVDS		(1 << 17)
+#define SCTL_SCPEREN0_USB_HOST		(1 << 18)
+#define SCTL_SCPEREN0_USB_OTG		(1 << 19)
+#define SCTL_SCPEREN0_MCI0		(1 << 20)
+#define SCTL_SCPEREN0_MCI1		(1 << 21)
+#define SCTL_SCPEREN0_MCI2		(1 << 22)
+#define SCTL_SCPEREN0_MCI3		(1 << 23)
+#define SCTL_SCPEREN0_SATA		(1 << 24)
+#define SCTL_SCPEREN0_ETHERNET		(1 << 25)
+#define SCTL_SCPEREN0_VIC		(1 << 26)
+#define SCTL_SCPEREN0_DMA_AUDIO		(1 << 27)
+#define SCTL_SCPEREN0_DMA_SOC		(1 << 28)
+#define SCTL_SCPEREN0_RAM		(1 << 29)
+#define SCTL_SCPEREN0_VIP		(1 << 30)
+#define SCTL_SCPEREN0_ARM		(1 << 31)
+
+#define SCTL_SCPEREN1_UART0		(1 << 0)
+#define SCTL_SCPEREN1_UART1		(1 << 1)
+#define SCTL_SCPEREN1_UART2		(1 << 2)
+#define SCTL_SCPEREN1_UART3		(1 << 3)
+#define SCTL_SCPEREN1_MSP0		(1 << 4)
+#define SCTL_SCPEREN1_MSP1		(1 << 5)
+#define SCTL_SCPEREN1_MSP2		(1 << 6)
+#define SCTL_SCPEREN1_MSP3		(1 << 7)
+#define SCTL_SCPEREN1_MSP4		(1 << 8)
+#define SCTL_SCPEREN1_MSP5		(1 << 9)
+#define SCTL_SCPEREN1_SPI0		(1 << 10)
+#define SCTL_SCPEREN1_SPI1		(1 << 11)
+#define SCTL_SCPEREN1_SPI2		(1 << 12)
+#define SCTL_SCPEREN1_I2C0		(1 << 13)
+#define SCTL_SCPEREN1_I2C1		(1 << 14)
+#define SCTL_SCPEREN1_I2C2		(1 << 15)
+#define SCTL_SCPEREN1_I2C3		(1 << 16)
+#define SCTL_SCPEREN1_USB_PHY		(1 << 17)
+
+#endif /* __STA2X11_MFD_H */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 8516fd1eaabc..f8d5b4d5843f 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -117,7 +117,7 @@ struct matrix_keymap_data;
  * @no_autorepeat: disable key autorepeat
  */
 struct stmpe_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
+	const struct matrix_keymap_data *keymap_data;
 	unsigned int debounce_ms;
 	unsigned int scan_count;
 	bool no_autorepeat;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 1c6c2860d1a6..dd8dc0a6c462 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -18,6 +18,7 @@
 #define __LINUX_MFD_TPS65910_H
 
 #include <linux/gpio.h>
+#include <linux/regmap.h>
 
 /* TPS chip id list */
 #define TPS65910			0
@@ -783,6 +784,18 @@
 #define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3		0x4
 #define TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP		0x8
 
+/*
+ * Sleep keepon data: Maintains the state in sleep mode
+ * @therm_keepon: Keep on the thermal monitoring in sleep state.
+ * @clkout32k_keepon: Keep on the 32KHz clock output in sleep state.
+ * @i2chs_keepon: Keep on high speed internal clock in sleep state.
+ */
+struct tps65910_sleep_keepon_data {
+	unsigned therm_keepon:1;
+	unsigned clkout32k_keepon:1;
+	unsigned i2chs_keepon:1;
+};
+
 /**
  * struct tps65910_board
  * Board platform data may be used to initialize regulators.
@@ -794,6 +807,8 @@ struct tps65910_board {
 	int irq_base;
 	int vmbch_threshold;
 	int vmbch2_threshold;
+	bool en_dev_slp;
+	struct tps65910_sleep_keepon_data *slp_keepon;
 	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
 	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
 	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
@@ -809,16 +824,14 @@ struct tps65910 {
 	struct regmap *regmap;
 	struct mutex io_mutex;
 	unsigned int id;
-	int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
-	int (*write)(struct tps65910 *tps65910, u8 reg, int size, void *src);
 
 	/* Client devices */
 	struct tps65910_pmic *pmic;
 	struct tps65910_rtc *rtc;
 	struct tps65910_power *power;
 
-	/* GPIO Handling */
-	struct gpio_chip gpio;
+	/* Device node parsed board data */
+	struct tps65910_board *of_plat_data;
 
 	/* IRQ Handling */
 	struct mutex irq_lock;
@@ -826,6 +839,7 @@ struct tps65910 {
 	int irq_base;
 	int irq_num;
 	u32 irq_mask;
+	struct irq_domain *domain;
 };
 
 struct tps65910_platform_data {
@@ -833,9 +847,6 @@ struct tps65910_platform_data {
 	int irq_base;
 };
 
-int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
-int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
-void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base);
 int tps65910_irq_init(struct tps65910 *tps65910, int irq,
 		struct tps65910_platform_data *pdata);
 int tps65910_irq_exit(struct tps65910 *tps65910);
@@ -845,4 +856,28 @@ static inline int tps65910_chip_id(struct tps65910 *tps65910)
 	return tps65910->id;
 }
 
+static inline int tps65910_reg_read(struct tps65910 *tps65910, u8 reg,
+		unsigned int *val)
+{
+	return regmap_read(tps65910->regmap, reg, val);
+}
+
+static inline int tps65910_reg_write(struct tps65910 *tps65910, u8 reg,
+		unsigned int val)
+{
+	return regmap_write(tps65910->regmap, reg, val);
+}
+
+static inline int tps65910_reg_set_bits(struct tps65910 *tps65910, u8 reg,
+		u8 mask)
+{
+	return regmap_update_bits(tps65910->regmap, reg, mask, mask);
+}
+
+static inline int tps65910_reg_clear_bits(struct tps65910 *tps65910, u8 reg,
+		u8 mask)
+{
+	return regmap_update_bits(tps65910->regmap, reg, mask, 0);
+}
+
 #endif /*  __LINUX_MFD_TPS65910_H */
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index b15b5f03f5c4..6659487c31e7 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -27,6 +27,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
+#include <linux/regulator/consumer.h>
 
 #define TWL6040_REG_ASICID		0x01
 #define TWL6040_REG_ASICREV		0x02
@@ -203,6 +204,7 @@ struct regmap;
 struct twl6040 {
 	struct device *dev;
 	struct regmap *regmap;
+	struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
 	struct mutex mutex;
 	struct mutex io_mutex;
 	struct mutex irq_mutex;
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 4b1211859f74..4a3b83a77614 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -17,6 +17,7 @@
 
 #include <linux/completion.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/regmap.h>
 
@@ -338,6 +339,7 @@
 #define WM831X_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
 
 struct regulator_dev;
+struct irq_domain;
 
 #define WM831X_NUM_IRQ_REGS 5
 #define WM831X_NUM_GPIO_REGS 16
@@ -367,7 +369,7 @@ struct wm831x {
 
 	int irq;  /* Our chip IRQ */
 	struct mutex irq_lock;
-	int irq_base;
+	struct irq_domain *irq_domain;
 	int irq_masks_cur[WM831X_NUM_IRQ_REGS];   /* Currently active value */
 	int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
 
@@ -382,7 +384,8 @@ struct wm831x {
 
 	/* Used by the interrupt controller code to post writes */
 	int gpio_update[WM831X_NUM_GPIO_REGS];
-	bool gpio_level[WM831X_NUM_GPIO_REGS];
+	bool gpio_level_high[WM831X_NUM_GPIO_REGS];
+	bool gpio_level_low[WM831X_NUM_GPIO_REGS];
 
 	struct mutex auxadc_lock;
 	struct list_head auxadc_pending;
@@ -417,6 +420,11 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq);
 void wm831x_irq_exit(struct wm831x *wm831x);
 void wm831x_auxadc_init(struct wm831x *wm831x);
 
+static inline int wm831x_irq(struct wm831x *wm831x, int irq)
+{
+	return irq_create_mapping(wm831x->irq_domain, irq);
+}
+
 extern struct regmap_config wm831x_regmap_config;
 
 #endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 98fcc977e82b..9192b6404a73 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -602,6 +602,7 @@ extern const u16 wm8352_mode2_defaults[];
 extern const u16 wm8352_mode3_defaults[];
 
 struct wm8350;
+struct regmap;
 
 struct wm8350_hwmon {
 	struct platform_device *pdev;
@@ -612,13 +613,7 @@ struct wm8350 {
 	struct device *dev;
 
 	/* device IO */
-	union {
-		struct i2c_client *i2c_client;
-		struct spi_device *spi_device;
-	};
-	int (*read_dev)(struct wm8350 *wm8350, char reg, int size, void *dest);
-	int (*write_dev)(struct wm8350 *wm8350, char reg, int size,
-			 void *src);
+	struct regmap *regmap;
 	u16 *reg_cache;
 
 	struct mutex auxadc_mutex;
diff --git a/include/linux/mfd/wm8400-private.h b/include/linux/mfd/wm8400-private.h
index 0147b6968510..2de565b94d0c 100644
--- a/include/linux/mfd/wm8400-private.h
+++ b/include/linux/mfd/wm8400-private.h
@@ -24,19 +24,14 @@
 #include <linux/mfd/wm8400.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
-
-struct regmap;
+#include <linux/regmap.h>
 
 #define WM8400_REGISTER_COUNT 0x55
 
 struct wm8400 {
 	struct device *dev;
-
-	struct mutex io_lock;
 	struct regmap *regmap;
 
-	u16 reg_cache[WM8400_REGISTER_COUNT];
-
 	struct platform_device regulators[6];
 };
 
@@ -930,6 +925,11 @@ struct wm8400 {
 
 u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg);
 int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data);
-int wm8400_set_bits(struct wm8400 *wm8400, u8 reg, u16 mask, u16 val);
+
+static inline int wm8400_set_bits(struct wm8400 *wm8400, u8 reg,
+				  u16 mask, u16 val)
+{
+	return regmap_update_bits(wm8400->regmap, reg, mask, val);
+}
 
 #endif
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 6695c3ec4518..1f173306bf05 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -57,6 +57,7 @@ struct wm8994 {
 
 	enum wm8994_type type;
 	int revision;
+	int cust_id;
 
 	struct device *dev;
 	struct regmap *regmap;
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index 86e6a032a078..053548961c15 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -2212,6 +2212,9 @@
 /*
  * R256 (0x100) - Chip Revision
  */
+#define WM8994_CUST_ID_MASK                     0xFF00  /* CUST_ID - [15:8] */
+#define WM8994_CUST_ID_SHIFT                         8  /* CUST_ID - [15:8] */
+#define WM8994_CUST_ID_WIDTH                         8  /* CUST_ID - [15:8] */
 #define WM8994_CHIP_REV_MASK                    0x000F  /* CHIP_REV - [3:0] */
 #define WM8994_CHIP_REV_SHIFT                        0  /* CHIP_REV - [3:0] */
 #define WM8994_CHIP_REV_WIDTH                        4  /* CHIP_REV - [3:0] */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3329965ed63f..ab741b0d0074 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2506,6 +2506,7 @@
 #define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
+#define PCI_DEVICE_ID_INTEL_CENTERTON_ILB	0x0c60
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
 #define PCI_DEVICE_ID_INTEL_82573E_SOL	0x1085
 #define PCI_DEVICE_ID_INTEL_82573L_SOL	0x108F