Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.

1 files changed, 201 insertions, 0 deletions

diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
new file mode 100644
index 000000000000..838c6b487cc5
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/device.h>
+
+/*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK	0x1
+#define AB8500_SYS_CTRL2_BLOCK	0x2
+#define AB8500_REGU_CTRL1	0x3
+#define AB8500_REGU_CTRL2	0x4
+#define AB8500_USB		0x5
+#define AB8500_TVOUT		0x6
+#define AB8500_DBI		0x7
+#define AB8500_ECI_AV_ACC	0x8
+#define AB8500_RESERVED		0x9
+#define AB8500_GPADC		0xA
+#define AB8500_CHARGER		0xB
+#define AB8500_GAS_GAUGE	0xC
+#define AB8500_AUDIO		0xD
+#define AB8500_INTERRUPT	0xE
+#define AB8500_RTC		0xF
+#define AB8500_MISC		0x10
+#define AB8500_DEVELOPMENT	0x11
+#define AB8500_DEBUG		0x12
+#define AB8500_PROD_TEST	0x13
+#define AB8500_OTP_EMUL		0x15
+
+/*
+ * Interrupts
+ */
+
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0
+#define AB8500_INT_UN_PLUG_TV_DET	1
+#define AB8500_INT_PLUG_TV_DET		2
+#define AB8500_INT_TEMP_WARM		3
+#define AB8500_INT_PON_KEY2DB_F		4
+#define AB8500_INT_PON_KEY2DB_R		5
+#define AB8500_INT_PON_KEY1DB_F		6
+#define AB8500_INT_PON_KEY1DB_R		7
+#define AB8500_INT_BATT_OVV		8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10
+#define AB8500_INT_MAIN_CH_PLUG_DET	11
+#define AB8500_INT_USB_ID_DET_F		12
+#define AB8500_INT_USB_ID_DET_R		13
+#define AB8500_INT_VBUS_DET_F		14
+#define AB8500_INT_VBUS_DET_R		15
+#define AB8500_INT_VBUS_CH_DROP_END	16
+#define AB8500_INT_RTC_60S		17
+#define AB8500_INT_RTC_ALARM		18
+#define AB8500_INT_BAT_CTRL_INDB	20
+#define AB8500_INT_CH_WD_EXP		21
+#define AB8500_INT_VBUS_OVV		22
+#define AB8500_INT_MAIN_CH_DROP_END	23
+#define AB8500_INT_CCN_CONV_ACC		24
+#define AB8500_INT_INT_AUD		25
+#define AB8500_INT_CCEOC		26
+#define AB8500_INT_CC_INT_CALIB		27
+#define AB8500_INT_LOW_BAT_F		28
+#define AB8500_INT_LOW_BAT_R		29
+#define AB8500_INT_BUP_CHG_NOT_OK	30
+#define AB8500_INT_BUP_CHG_OK		31
+#define AB8500_INT_GP_HW_ADC_CONV_END	32
+#define AB8500_INT_ACC_DETECT_1DB_F	33
+#define AB8500_INT_ACC_DETECT_1DB_R	34
+#define AB8500_INT_ACC_DETECT_22DB_F	35
+#define AB8500_INT_ACC_DETECT_22DB_R	36
+#define AB8500_INT_ACC_DETECT_21DB_F	37
+#define AB8500_INT_ACC_DETECT_21DB_R	38
+#define AB8500_INT_GP_SW_ADC_CONV_END	39
+#define AB8500_INT_GPIO6R		40
+#define AB8500_INT_GPIO7R		41
+#define AB8500_INT_GPIO8R		42
+#define AB8500_INT_GPIO9R		43
+#define AB8500_INT_GPIO10R		44
+#define AB8500_INT_GPIO11R		45
+#define AB8500_INT_GPIO12R		46
+#define AB8500_INT_GPIO13R		47
+#define AB8500_INT_GPIO24R		48
+#define AB8500_INT_GPIO25R		49
+#define AB8500_INT_GPIO36R		50
+#define AB8500_INT_GPIO37R		51
+#define AB8500_INT_GPIO38R		52
+#define AB8500_INT_GPIO39R		53
+#define AB8500_INT_GPIO40R		54
+#define AB8500_INT_GPIO41R		55
+#define AB8500_INT_GPIO6F		56
+#define AB8500_INT_GPIO7F		57
+#define AB8500_INT_GPIO8F		58
+#define AB8500_INT_GPIO9F		59
+#define AB8500_INT_GPIO10F		60
+#define AB8500_INT_GPIO11F		61
+#define AB8500_INT_GPIO12F		62
+#define AB8500_INT_GPIO13F		63
+#define AB8500_INT_GPIO24F		64
+#define AB8500_INT_GPIO25F		65
+#define AB8500_INT_GPIO36F		66
+#define AB8500_INT_GPIO37F		67
+#define AB8500_INT_GPIO38F		68
+#define AB8500_INT_GPIO39F		69
+#define AB8500_INT_GPIO40F		70
+#define AB8500_INT_GPIO41F		71
+#define AB8500_INT_ADP_SOURCE_ERROR	72
+#define AB8500_INT_ADP_SINK_ERROR	73
+#define AB8500_INT_ADP_PROBE_PLUG	74
+#define AB8500_INT_ADP_PROBE_UNPLUG	75
+#define AB8500_INT_ADP_SENSE_OFF	76
+#define AB8500_INT_USB_PHY_POWER_ERR	78
+#define AB8500_INT_USB_LINK_STATUS	79
+#define AB8500_INT_BTEMP_LOW		80
+#define AB8500_INT_BTEMP_LOW_MEDIUM	81
+#define AB8500_INT_BTEMP_MEDIUM_HIGH	82
+#define AB8500_INT_BTEMP_HIGH		83
+#define AB8500_INT_USB_CHARGER_NOT_OK	89
+#define AB8500_INT_ID_WAKEUP_R		90
+#define AB8500_INT_ID_DET_R1R		92
+#define AB8500_INT_ID_DET_R2R		93
+#define AB8500_INT_ID_DET_R3R		94
+#define AB8500_INT_ID_DET_R4R		95
+#define AB8500_INT_ID_WAKEUP_F		96
+#define AB8500_INT_ID_DET_R1F		98
+#define AB8500_INT_ID_DET_R2F		99
+#define AB8500_INT_ID_DET_R3F		100
+#define AB8500_INT_ID_DET_R4F		101
+#define AB8500_INT_USB_CHG_DET_DONE	102
+#define AB8500_INT_USB_CH_TH_PROT_F	104
+#define AB8500_INT_USB_CH_TH_PROT_R    105
+#define AB8500_INT_MAIN_CH_TH_PROT_F   106
+#define AB8500_INT_MAIN_CH_TH_PROT_R	107
+#define AB8500_INT_USB_CHARGER_NOT_OKF	111
+
+#define AB8500_NR_IRQS			112
+#define AB8500_NUM_IRQ_REGS		14
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @irq: irq line
+ * @chip_id: chip revision id
+ * @write: register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ */
+struct ab8500 {
+	struct device	*dev;
+	struct mutex	lock;
+	struct mutex	irq_lock;
+
+	int		irq_base;
+	int		irq;
+	u8		chip_id;
+
+	int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
+	int (*read) (struct ab8500 *a8500, u16 addr);
+
+	unsigned long	tx_buf[4];
+	unsigned long	rx_buf[4];
+
+	u8 mask[AB8500_NUM_IRQ_REGS];
+	u8 oldmask[AB8500_NUM_IRQ_REGS];
+};
+
+struct regulator_reg_init;
+struct regulator_init_data;
+struct ab8500_gpio_platform_data;
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ * @num_regulator_reg_init: number of regulator init registers
+ * @regulator_reg_init: regulator init registers
+ * @num_regulator: number of regulators
+ * @regulator: machine-specific constraints for regulators
+ */
+struct ab8500_platform_data {
+	int irq_base;
+	void (*init) (struct ab8500 *);
+	int num_regulator_reg_init;
+	struct ab8500_regulator_reg_init *regulator_reg_init;
+	int num_regulator;
+	struct regulator_init_data *regulator;
+	struct ab8500_gpio_platform_data *gpio;
+};
+
+extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+
+#endif /* MFD_AB8500_H */