[PATCH] powerpc: Merge elf.h

ppc/ppc64: Merge elf.h into include/asm-powerpc

Merge elf.h into a single include file for 32 and 64-bit ppc platforms. This
patch has been tested on 32-bit and built on 64-bit platforms.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 151 deletions

diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h
deleted file mode 100644
index c25cc35e6ab5..000000000000
--- a/include/asm-ppc/elf.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifndef __PPC_ELF_H
-#define __PPC_ELF_H
-
-/*
- * ELF register definitions..
- */
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/cputable.h>
-#include <asm/auxvec.h>
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE		0
-#define R_PPC_ADDR32		1	/* 32bit absolute address */
-#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-#define R_PPC_ADDR16		3	/* 16bit absolute address */
-#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN	8
-#define R_PPC_ADDR14_BRNTAKEN	9
-#define R_PPC_REL24		10	/* PC relative 26 bit */
-#define R_PPC_REL14		11	/* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN	12
-#define R_PPC_REL14_BRNTAKEN	13
-#define R_PPC_GOT16		14
-#define R_PPC_GOT16_LO		15
-#define R_PPC_GOT16_HI		16
-#define R_PPC_GOT16_HA		17
-#define R_PPC_PLTREL24		18
-#define R_PPC_COPY		19
-#define R_PPC_GLOB_DAT		20
-#define R_PPC_JMP_SLOT		21
-#define R_PPC_RELATIVE		22
-#define R_PPC_LOCAL24PC		23
-#define R_PPC_UADDR32		24
-#define R_PPC_UADDR16		25
-#define R_PPC_REL32		26
-#define R_PPC_PLT32		27
-#define R_PPC_PLTREL32		28
-#define R_PPC_PLT16_LO		29
-#define R_PPC_PLT16_HI		30
-#define R_PPC_PLT16_HA		31
-#define R_PPC_SDAREL16		32
-#define R_PPC_SECTOFF		33
-#define R_PPC_SECTOFF_LO	34
-#define R_PPC_SECTOFF_HI	35
-#define R_PPC_SECTOFF_HA	36
-/* Keep this the last entry.  */
-#define R_PPC_NUM		37
-
-#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
-#define ELF_NFPREG	33	/* includes fpscr */
-#define ELF_NVRREG	33	/* includes vscr */
-#define ELF_NEVRREG	34	/* includes acc (as 2) */
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_ARCH	EM_PPC
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-
-/* General registers */
-typedef unsigned long elf_greg_t;
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-/* Floating point registers */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/* Altivec registers */
-typedef __vector128 elf_vrreg_t;
-typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
-
-#ifdef __KERNEL__
-
-struct task_struct;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-
-#define elf_check_arch(x) ((x)->e_machine == EM_PPC)
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (0x08000000)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-#define ELF_CORE_COPY_REGS(gregs, regs)				\
-	memcpy((gregs), (regs), sizeof(struct pt_regs));	\
-	memset((char *)(gregs) + sizeof(struct pt_regs), 0,	\
-	       sizeof(elf_gregset_t) - sizeof(struct pt_regs));
-
-#define ELF_CORE_COPY_TASK_REGS(t, elfregs)			\
-	((t)->thread.regs?					\
-	 ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0)
-
-extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
-#define ELF_CORE_COPY_FPREGS(t, fpu)	dump_task_fpu((t), (fpu))
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  This could be done in userspace,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(cur_cpu_spec[0]->cpu_user_features)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM	(NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-extern int dcache_bsize;
-extern int icache_bsize;
-extern int ucache_bsize;
-
-/*
- * The requirements here are:
- * - keep the final alignment of sp (sp & 0xf)
- * - make sure the 32-bit value at the first 16 byte aligned position of
- *   AUXV is greater than 16 for glibc compatibility.
- *   AT_IGNOREPPC is used for that.
- * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
- *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
- */
-#define ARCH_DLINFO							\
-do {									\
-	/* Handle glibc compatibility. */				\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	/* Cache size items */						\
-	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
-	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
-	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
- } while (0)
-
-#endif /* __KERNEL__ */
-#endif