Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...

1 files changed, 46 insertions, 26 deletions

diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 560256115b23..db7562d99b95 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_dr.c - dual role switch and host glue layer
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/debugfs.h>
@@ -261,21 +252,22 @@ static void extcon_register_dwork(struct work_struct *work)
  * depending on user input.
  * This is useful in special cases, such as uses TYPE-A receptacle but also
  * wants to support dual-role mode.
- * It generates cable state changes by pulling up/down IDPIN and
- * notifies driver to switch mode by "extcon-usb-gpio".
- * NOTE: when use MICRO receptacle, should not enable this interface.
  */
 static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	if (to_host)
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_ground);
-	else
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_float);
+	if (to_host) {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
+	} else {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
+	}
 }
 
-
 static int ssusb_mode_show(struct seq_file *sf, void *unused)
 {
 	struct ssusb_mtk *ssusb = sf->private;
@@ -388,17 +380,45 @@ static void ssusb_debugfs_exit(struct ssusb_mtk *ssusb)
 	debugfs_remove_recursive(ssusb->dbgfs_root);
 }
 
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode)
+{
+	u32 value;
+
+	value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
+	switch (mode) {
+	case MTU3_DR_FORCE_DEVICE:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_HOST:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG;
+		value &= ~SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_NONE:
+		value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
+}
+
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, extcon_register_dwork);
-
-	if (otg_sx->manual_drd_enabled)
+	if (otg_sx->manual_drd_enabled) {
 		ssusb_debugfs_init(ssusb);
-
-	/* It is enough to delay 1s for waiting for host initialization */
-	schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	} else {
+		INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork,
+				  extcon_register_dwork);
+
+		/*
+		 * It is enough to delay 1s for waiting for
+		 * host initialization
+		 */
+		schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	}
 
 	return 0;
 }
@@ -407,8 +427,8 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	cancel_delayed_work(&otg_sx->extcon_reg_dwork);
-
 	if (otg_sx->manual_drd_enabled)
 		ssusb_debugfs_exit(ssusb);
+	else
+		cancel_delayed_work(&otg_sx->extcon_reg_dwork);
 }