Merge tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Here are a bunch of USB patches for 3.3-rc1.

Nothing major, largest thing here is the removal of some drivers that
did not work at all.  Other than that, the normal collection of bugfixes
and new device ids.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits)
  uwb & wusb: fix kconfig error
  USB: Realtek cr: fix autopm scheduling while atomic
  USB: ftdi_sio: Add more identifiers
  xHCI: Cleanup isoc transfer ring when TD length mismatch found
  usb: musb: omap2430: minor cleanups.
  qcaux: add more Pantech UML190 and UML290 ports
  Revert "drivers: usb: Fix dependency for USB_HWA_HCD"
  usb: mv-otg - Fix build if CONFIG_USB is not set
  USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE
  usb: add support for STA2X11 host driver
  drivers: usb: Fix dependency for USB_HWA_HCD
  kernel-doc: fix new warning in usb.h
  USB: OHCI: fix new compiler warnings
  usb: serial: kobil_sct: fix compile warning:
  drivers/usb/host/ehci-fsl.c: add missing iounmap
  USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core
  USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
  USB: cdc-wdm: use two mutexes to allow simultaneous read and write
  USB: cdc-wdm: updating desc->length must be protected by spin_lock
  USB: usbsevseg: fix max length
  ...

5 files changed, 25 insertions, 5 deletions

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e90344a17631..b556a72264d1 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	 */
 	if (pdata->init && pdata->init(pdev)) {
 		retval = -ENODEV;
-		goto err3;
+		goto err4;
 	}
 
 	/* Enable USB controller, 83xx or 8536 */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d343ac..01bb7241d6ef 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 
 	/* Serial Bus Release Number is at PCI 0x60 offset */
 	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+		ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
 
 	/* Keep this around for a while just in case some EHCI
 	 * implementation uses legacy PCI PM support.  This test
@@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
+	}, {
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+	.driver_data = (unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 5179fcd73d8a..e4bcb62b930a 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
 		ohci_dbg(ohci,format, ## arg ); \
 	} while (0);
 
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+	do { \
+		unsigned s_len; \
+		s_len = scnprintf(*next, *size, format, ## arg); \
+		*size -= s_len; *next += s_len; \
+	} while (0);
+
 
 static void ohci_dump_intr_mask (
 	struct ohci_hcd *ohci,
@@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 
 	/* dump driver info, then registers in spec order */
 
-	ohci_dbg_sw (ohci, &next, &size,
+	ohci_dbg_nosw(ohci, &next, &size,
 		"bus %s, device %s\n"
 		"%s\n"
 		"%s\n",
@@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 
 	/* hcca */
 	if (ohci->hcca)
-		ohci_dbg_sw (ohci, &next, &size,
+		ohci_dbg_nosw(ohci, &next, &size,
 			"hcca frame 0x%04x\n", ohci_frame_no(ohci));
 
 	/* other registers mostly affect frame timings */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810cc2d3..1843bb68ac7c 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB OHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b90e1386418b..b62037bff688 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
  *
  * Returns a zero-based port number, which is suitable for indexing into each of
  * the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
  */
 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		struct xhci_hcd *xhci, u32 port_id)
@@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_set_link_state(xhci, port_array, faked_port_index,
 						XDEV_U0);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index);
+					faked_port_index + 1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto cleanup;
@@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		/* Check TD length */
 		if (running_total != td_len) {
 			xhci_err(xhci, "ISOC TD length unmatch\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto cleanup;
 		}
 	}