Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 14 insertions, 32 deletions

diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 066cb89376de..cec8871b77f9 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -394,7 +394,7 @@ static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
 
 	if (reg & FUSB300_EPSET0_STL) {
 		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
-		reg &= ~FUSB300_EPSET0_STL;
+		reg |= FUSB300_EPSET0_STL_CLR;
 		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
 	}
 }
@@ -930,33 +930,33 @@ static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
 
 	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
 		FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
+	return;
+
 IDMA_RESET:
-	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0,
-		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0);
+	reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0);
 }
 
-static void  fusb300_set_idma(struct fusb300_ep *ep,
+static void fusb300_set_idma(struct fusb300_ep *ep,
 			struct fusb300_request *req)
 {
-	dma_addr_t d;
-
-	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE);
+	int ret;
 
-	if (dma_mapping_error(NULL, d)) {
-		printk(KERN_DEBUG "dma_mapping_error\n");
+	ret = usb_gadget_map_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
+	if (ret)
 		return;
-	}
-
-	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE);
 
 	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
 		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
 
-	fusb300_fill_idma_prdtbl(ep, d, req->req.length);
+	fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length);
 	/* check idma is done */
 	fusb300_wait_idma_finished(ep);
 
-	dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
+	usb_gadget_unmap_request(&ep->fusb300->gadget,
+			&req->req, DMA_TO_DEVICE);
 }
 
 static void in_ep_fifo_handler(struct fusb300_ep *ep)
@@ -1316,7 +1316,6 @@ static int fusb300_udc_start(struct usb_gadget *g,
 	/* hook up the driver */
 	driver->driver.bus = NULL;
 	fusb300->driver = driver;
-	fusb300->gadget.dev.driver = &driver->driver;
 
 	return 0;
 }
@@ -1327,7 +1326,6 @@ static int fusb300_udc_stop(struct usb_gadget *g,
 	struct fusb300 *fusb300 = to_fusb300(g);
 
 	driver->unbind(&fusb300->gadget);
-	fusb300->gadget.dev.driver = NULL;
 
 	init_controller(fusb300);
 	fusb300->driver = NULL;
@@ -1422,14 +1420,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 
 	fusb300->gadget.ops = &fusb300_gadget_ops;
 
-	device_initialize(&fusb300->gadget.dev);
-
-	dev_set_name(&fusb300->gadget.dev, "gadget");
-
 	fusb300->gadget.max_speed = USB_SPEED_HIGH;
-	fusb300->gadget.dev.parent = &pdev->dev;
-	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	fusb300->gadget.dev.release = pdev->dev.release;
 	fusb300->gadget.name = udc_name;
 	fusb300->reg = reg;
 
@@ -1478,19 +1469,10 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_udc;
 
-	ret = device_add(&fusb300->gadget.dev);
-	if (ret) {
-		pr_err("device_add error (%d)\n", ret);
-		goto err_add_device;
-	}
-
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 
 	return 0;
 
-err_add_device:
-	usb_del_gadget_udc(&fusb300->gadget);
-
 err_add_udc:
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);