Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

40 files changed, 3833 insertions, 1089 deletions

diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 0ff7fda0742f..4fcec1d793a7 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -760,10 +760,17 @@ static int khvcd(void *unused)
 			if (poll_mask == 0)
 				schedule();
 			else {
+				unsigned long j_timeout;
+
 				if (timeout < MAX_TIMEOUT)
 					timeout += (timeout >> 6) + 1;
 
-				msleep_interruptible(timeout);
+				/*
+				 * We don't use msleep_interruptible otherwise
+				 * "kick" will fail to wake us up
+				 */
+				j_timeout = msecs_to_jiffies(timeout) + 1;
+				schedule_timeout_interruptible(j_timeout);
 			}
 		}
 		__set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 3502a7bbb69e..809920d80a66 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -8,20 +8,11 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
  */
 
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/err.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
 
+#include <asm/dcc.h>
 #include <asm/processor.h>
 
 #include "hvc_console.h"
@@ -30,35 +21,6 @@
 #define DCC_STATUS_RX		(1 << 30)
 #define DCC_STATUS_TX		(1 << 29)
 
-static inline u32 __dcc_getstatus(void)
-{
-	u32 __ret;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
-		: "=r" (__ret) : : "cc");
-
-	return __ret;
-}
-
-
-static inline char __dcc_getchar(void)
-{
-	char __c;
-
-	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
-		: "=r" (__c));
-	isb();
-
-	return __c;
-}
-
-static inline void __dcc_putchar(char c)
-{
-	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
-		: /* no output register */
-		: "r" (c));
-	isb();
-}
-
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
 {
 	int i;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1b2db9a3038c..644ddb841d9f 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -848,13 +848,11 @@ static struct n_hdlc *n_hdlc_alloc(void)
 {
 	struct n_hdlc_buf *buf;
 	int i;
-	struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
+	struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL);
 
 	if (!n_hdlc)
 		return NULL;
 
-	memset(n_hdlc, 0, sizeof(*n_hdlc));
-
 	n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
 	n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
 	n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
@@ -952,8 +950,6 @@ static char hdlc_register_ok[] __initdata =
 	KERN_INFO "N_HDLC line discipline registered.\n";
 static char hdlc_register_fail[] __initdata =
 	KERN_ERR "error registering line discipline: %d\n";
-static char hdlc_init_fail[] __initdata =
-	KERN_INFO "N_HDLC: init failure %d\n";
 
 static int __init n_hdlc_init(void)
 {
@@ -973,8 +969,6 @@ static int __init n_hdlc_init(void)
 	else
 		printk(hdlc_register_fail, status);
 
-	if (status)
-		printk(hdlc_init_fail, status);
 	return status;
 	
 }	/* end of init_module() */
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 2d4bd3929e50..27f7ad6b74c1 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(up, BOTH_EMPTY);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	serial_port_out(port, UART_TX, c);
-	if (c == 10) {
-		wait_for_xmitr(up, BOTH_EMPTY);
-		serial_port_out(port, UART_TX, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
@@ -2338,9 +2333,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * the trigger, or the MCR RTS bit is cleared.  In the case where
 	 * the remote UART is not using CTS auto flow control, we must
 	 * have sufficient FIFO entries for the latency of the remote
-	 * UART to respond.  IOW, at least 32 bytes of FIFO.
+	 * UART to respond.  IOW, at least 32 bytes of FIFO. Also enable
+	 * AFE if hw flow control is supported
 	 */
-	if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
+	if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) ||
+	    (port->flags & UPF_HARD_FLOW)) {
 		up->mcr &= ~UART_MCR_AFE;
 		if (termios->c_cflag & CRTSCTS)
 			up->mcr |= UART_MCR_AFE;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index ab9096dc3849..148ffe4c232f 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -192,21 +192,28 @@ int serial8250_request_dma(struct uart_8250_port *p)
 
 	dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size,
 					&dma->rx_addr, GFP_KERNEL);
-	if (!dma->rx_buf) {
-		dma_release_channel(dma->rxchan);
-		dma_release_channel(dma->txchan);
-		return -ENOMEM;
-	}
+	if (!dma->rx_buf)
+		goto err;
 
 	/* TX buffer */
 	dma->tx_addr = dma_map_single(dma->txchan->device->dev,
 					p->port.state->xmit.buf,
 					UART_XMIT_SIZE,
 					DMA_TO_DEVICE);
+	if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) {
+		dma_free_coherent(dma->rxchan->device->dev, dma->rx_size,
+				  dma->rx_buf, dma->rx_addr);
+		goto err;
+	}
 
 	dev_dbg_ratelimited(p->port.dev, "got both dma channels\n");
 
 	return 0;
+err:
+	dma_release_channel(dma->rxchan);
+	dma_release_channel(dma->txchan);
+
+	return -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(serial8250_request_dma);
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ed3113576740..51b307aab75e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -62,6 +62,70 @@ struct dw8250_data {
 	struct uart_8250_dma	dma;
 };
 
+struct dw8250_acpi_desc {
+	void (*set_termios)(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old);
+};
+
+#define BYT_PRV_CLK			0x800
+#define BYT_PRV_CLK_EN			(1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT		1
+#define BYT_PRV_CLK_N_VAL_SHIFT		16
+#define BYT_PRV_CLK_UPDATE		(1 << 31)
+
+static void byt_set_termios(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	unsigned int m, n;
+	u32 reg;
+
+	/*
+	* For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+	* dividers must be adjusted.
+	*
+	* uartclk = (m / n) * 100 MHz, where m <= n
+	*/
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 2000000:
+	case 4000000:
+		m = 64;
+		n = 100;
+		p->uartclk = 64000000;
+		break;
+	case 3500000:
+		m = 56;
+		n = 100;
+		p->uartclk = 56000000;
+		break;
+	case 1500000:
+	case 3000000:
+		m = 48;
+		n = 100;
+		p->uartclk = 48000000;
+		break;
+	case 2500000:
+		m = 40;
+		n = 100;
+		p->uartclk = 40000000;
+		break;
+	default:
+		m = 2304;
+		n = 3125;
+		p->uartclk = 73728000;
+	}
+
+	/* Reset the clock */
+	reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+	writel(reg, p->membase + BYT_PRV_CLK);
+	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+	writel(reg, p->membase + BYT_PRV_CLK);
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
@@ -278,6 +342,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 {
 	const struct acpi_device_id *id;
 	struct uart_port *p = &up->port;
+	struct dw8250_acpi_desc *acpi_desc;
 
 	dw8250_setup_port(up);
 
@@ -290,14 +355,18 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
 
-	if (!p->uartclk)
-		p->uartclk = (unsigned int)id->driver_data;
-
 	up->dma = &data->dma;
 
 	up->dma->rxconf.src_maxburst = p->fifosize / 4;
 	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
+	acpi_desc = (struct dw8250_acpi_desc *)id->driver_data;
+	if (!acpi_desc)
+		return 0;
+
+	if (acpi_desc->set_termios)
+		p->set_termios = acpi_desc->set_termios;
+
 	return 0;
 }
 
@@ -445,12 +514,16 @@ static const struct of_device_id dw8250_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
+static struct dw8250_acpi_desc byt_8250_desc = {
+	.set_termios = byt_set_termios,
+};
+
 static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT33C4", 0 },
 	{ "INT33C5", 0 },
 	{ "INT3434", 0 },
 	{ "INT3435", 0 },
-	{ "80860F0A", 0 },
+	{ "80860F0A", (kernel_ulong_t)&byt_8250_desc},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index c100d6343d50..cfef801a49d4 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -35,18 +35,8 @@
 #include <linux/serial_8250.h>
 #include <asm/io.h>
 #include <asm/serial.h>
-#ifdef CONFIG_FIX_EARLYCON_MEM
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#endif
 
-struct early_serial8250_device {
-	struct uart_port port;
-	char options[16];		/* e.g., 115200n8 */
-	unsigned int baud;
-};
-
-static struct early_serial8250_device early_device;
+static struct earlycon_device *early_device;
 
 unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
@@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c)
 static void __init early_serial8250_write(struct console *console,
 					const char *s, unsigned int count)
 {
-	struct uart_port *port = &early_device.port;
+	struct uart_port *port = &early_device->port;
 	unsigned int ier;
 
 	/* Save the IER and disable interrupts */
@@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
 	return (port->uartclk / 16) / quot;
 }
 
-static void __init init_port(struct early_serial8250_device *device)
+static void __init init_port(struct earlycon_device *device)
 {
 	struct uart_port *port = &device->port;
 	unsigned int divisor;
@@ -148,128 +138,42 @@ static void __init init_port(struct early_serial8250_device *device)
 	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
-static int __init parse_options(struct early_serial8250_device *device,
-								char *options)
+static int __init early_serial8250_setup(struct earlycon_device *device,
+					 const char *options)
 {
-	struct uart_port *port = &device->port;
-	int mmio, mmio32, length;
-
-	if (!options)
-		return -ENODEV;
-
-	port->uartclk = BASE_BAUD * 16;
-
-	mmio = !strncmp(options, "mmio,", 5);
-	mmio32 = !strncmp(options, "mmio32,", 7);
-	if (mmio || mmio32) {
-		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
-		port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
-					       &options, 0);
-		if (mmio32)
-			port->regshift = 2;
-#ifdef CONFIG_FIX_EARLYCON_MEM
-		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
-					port->mapbase & PAGE_MASK);
-		port->membase =
-			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
-		port->membase += port->mapbase & ~PAGE_MASK;
-#else
-		port->membase = ioremap_nocache(port->mapbase, 64);
-		if (!port->membase) {
-			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
-				__func__,
-			       (unsigned long long) port->mapbase);
-			return -ENOMEM;
-		}
-#endif
-	} else if (!strncmp(options, "io,", 3)) {
-		port->iotype = UPIO_PORT;
-		port->iobase = simple_strtoul(options + 3, &options, 0);
-		mmio = 0;
-	} else
-		return -EINVAL;
-
-	options = strchr(options, ',');
-	if (options) {
-		options++;
-		device->baud = simple_strtoul(options, NULL, 0);
-		length = min(strcspn(options, " ") + 1,
-			     (size_t)(sizeof(device->options)));
-		strlcpy(device->options, options, length);
-	} else {
-		device->baud = probe_baud(port);
-		snprintf(device->options, sizeof(device->options), "%u",
-			device->baud);
-	}
-
-	if (mmio || mmio32)
-		printk(KERN_INFO
-		       "Early serial console at MMIO%s 0x%llx (options '%s')\n",
-			mmio32 ? "32" : "",
-			(unsigned long long)port->mapbase,
-			device->options);
-	else
-		printk(KERN_INFO
-		      "Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
-
-	return 0;
-}
-
-static struct console early_serial8250_console __initdata = {
-	.name	= "uart",
-	.write	= early_serial8250_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static int __init early_serial8250_setup(char *options)
-{
-	struct early_serial8250_device *device = &early_device;
-	int err;
-
-	if (device->port.membase || device->port.iobase)
+	if (!(device->port.membase || device->port.iobase))
 		return 0;
 
-	err = parse_options(device, options);
-	if (err < 0)
-		return err;
+	if (!device->baud)
+		device->baud = probe_baud(&device->port);
 
 	init_port(device);
+
+	early_device = device;
+	device->con->write = early_serial8250_write;
 	return 0;
 }
+EARLYCON_DECLARE(uart8250, early_serial8250_setup);
+EARLYCON_DECLARE(uart, early_serial8250_setup);
 
 int __init setup_early_serial8250_console(char *cmdline)
 {
-	char *options;
-	int err;
+	char match[] = "uart8250";
 
-	options = strstr(cmdline, "uart8250,");
-	if (!options) {
-		options = strstr(cmdline, "uart,");
-		if (!options)
-			return 0;
-	}
+	if (cmdline && cmdline[4] == ',')
+		match[4] = '\0';
 
-	options = strchr(cmdline, ',') + 1;
-	err = early_serial8250_setup(options);
-	if (err < 0)
-		return err;
-
-	register_console(&early_serial8250_console);
-
-	return 0;
+	return setup_earlycon(cmdline, match, early_serial8250_setup);
 }
 
 int serial8250_find_port_for_earlycon(void)
 {
-	struct early_serial8250_device *device = &early_device;
-	struct uart_port *port = &device->port;
+	struct earlycon_device *device = early_device;
+	struct uart_port *port = device ? &device->port : NULL;
 	int line;
 	int ret;
 
-	if (!device->port.membase && !device->port.iobase)
+	if (!port || (!port->membase && !port->iobase))
 		return -ENODEV;
 
 	line = serial8250_find_port(port);
@@ -284,5 +188,3 @@ int serial8250_find_port_for_earlycon(void)
 
 	return ret;
 }
-
-early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b14bcba96c25..33137b3ba94d 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1753,6 +1753,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
+#define PCI_DEVICE_ID_ADVANTECH_PCI3618	0x3618
+#define PCI_DEVICE_ID_ADVANTECH_PCIf618	0xf618
 #define PCI_DEVICE_ID_TITAN_200I	0x8028
 #define PCI_DEVICE_ID_TITAN_400I	0x8048
 #define PCI_DEVICE_ID_TITAN_800I	0x8088
@@ -1778,6 +1780,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH352_2S	0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S	0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF	0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P	0x5053
 #define PCI_DEVICE_ID_WCH_CH353_2S1P	0x7053
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
@@ -2410,6 +2413,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_omegapci_setup,
 	},
+	/* WCH CH353 1S1P card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_1S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
 	/* WCH CH353 2S1P card (16550 clone) */
 	{
 		.vendor         = PCI_VENDOR_ID_WCH,
@@ -3526,6 +3537,7 @@ static const struct pci_device_id blacklist[] = {
 
 	/* multi-io cards handled by parport_serial */
 	{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
 };
 
 /*
@@ -3880,6 +3892,13 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
 		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
 		pbn_b2_8_921600 },
+	/* Advantech also use 0x3618 and 0xf618 */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
 	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 23329918f229..349ee598b34c 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -61,6 +61,7 @@ config SERIAL_8250_CONSOLE
 	bool "Console on 8250/16550 and compatible serial port"
 	depends on SERIAL_8250=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -90,11 +91,6 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
 config SERIAL_8250_GSC
 	tristate
 	depends on SERIAL_8250 && GSC
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5d9b01aa54f4..fb57159bad3a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -7,6 +7,13 @@ if TTY
 menu "Serial drivers"
 	depends on HAS_IOMEM
 
+config SERIAL_EARLYCON
+	bool
+	help
+	  Support for early consoles with the earlycon parameter. This enables
+	  the console before standard serial driver is probed. The console is
+	  enabled when early_param is processed.
+
 source "drivers/tty/serial/8250/Kconfig"
 
 comment "Non-8250 serial port support"
@@ -53,6 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE
 	bool "Support for console on AMBA serial port"
 	depends on SERIAL_AMBA_PL011=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	---help---
 	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
 	  console (the system console is the device which receives all kernel
@@ -65,6 +73,18 @@ config SERIAL_AMBA_PL011_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+config SERIAL_EARLYCON_ARM_SEMIHOST
+	bool "Early console using ARM semihosting"
+	depends on ARM64 || ARM
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using ARM semihosting. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon=smh" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 config SERIAL_SB1250_DUART
 	tristate "BCM1xxx on-chip DUART serial support"
 	depends on SIBYTE_SB1xxx_SOC=y
@@ -97,6 +117,7 @@ config SERIAL_ATMEL
 	bool "AT91 / AT32 on-chip serial port support"
 	depends on ARCH_AT91 || AVR32
 	select SERIAL_CORE
+	select SERIAL_MCTRL_GPIO
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
 	  AT91 and AT32 processors.
@@ -1160,6 +1181,16 @@ config SERIAL_SCCNXP_CONSOLE
 	help
 	  Support for console on SCCNXP serial ports.
 
+config SERIAL_SC16IS7XX
+	tristate "SC16IS7xx serial support"
+	depends on I2C
+	select SERIAL_CORE
+	select REGMAP_I2C if I2C
+	help
+	  This selects support for SC16IS7xx serial ports.
+	  Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+	  SC16IS760 and SC16IS762.
+
 config SERIAL_BFIN_SPORT
 	tristate "Blackfin SPORT emulate UART"
 	depends on BLACKFIN
@@ -1323,7 +1354,7 @@ config SERIAL_IFX6X60
 
 config SERIAL_PCH_UART
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	select SERIAL_CORE
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
@@ -1369,18 +1400,19 @@ config SERIAL_MXS_AUART_CONSOLE
 	  Enable a MXS AUART port to be the system console.
 
 config SERIAL_XILINX_PS_UART
-	tristate "Xilinx PS UART support"
+	tristate "Cadence (Xilinx Zynq) UART support"
 	depends on OF
 	select SERIAL_CORE
 	help
-	  This driver supports the Xilinx PS UART port.
+	  This driver supports the Cadence UART. It is found e.g. in Xilinx
+	  Zynq.
 
 config SERIAL_XILINX_PS_UART_CONSOLE
-	bool "Xilinx PS UART console support"
+	bool "Cadence UART console support"
 	depends on SERIAL_XILINX_PS_UART=y
 	select SERIAL_CORE_CONSOLE
 	help
-	  Enable a Xilinx PS UART port to be the system console.
+	  Enable a Cadence UART port to be the system console.
 
 config SERIAL_AR933X
 	tristate "AR933X serial port support"
@@ -1479,6 +1511,7 @@ config SERIAL_RP2_NR_UARTS
 
 config SERIAL_FSL_LPUART
 	tristate "Freescale lpuart serial port support"
+	depends on HAS_DMA
 	select SERIAL_CORE
 	help
 	  Support for the on-chip lpuart on some Freescale SOCs.
@@ -1508,6 +1541,20 @@ config SERIAL_ST_ASC_CONSOLE
 	depends on SERIAL_ST_ASC=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MEN_Z135
+	tristate "MEN 16z135 Support"
+	select SERIAL_CORE
+	depends on MCB
+	help
+	  Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
+	  on a MCB carrier.
+
+	  This driver can also be build as a module. If so, the module will be called
+	  men_z135_uart.ko
+
 endmenu
 
+config SERIAL_MCTRL_GPIO
+	tristate
+
 endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..0080cc362e09 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -5,6 +5,9 @@
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 obj-$(CONFIG_SERIAL_21285) += 21285.o
 
+obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
+obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+
 # These Sparc drivers have to appear before others such as 8250
 # which share ttySx minor node space.  Otherwise console device
 # names change and other unplesantries.
@@ -48,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
 obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
+obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -87,3 +91,7 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
 obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
+obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
+
+# GPIOLIB helpers for modem control lines
+obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index dacf0a09ab24..ee3d80346780 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -303,7 +303,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 
 	/* Optionally make use of an RX channel as well */
 	chan = dma_request_slave_channel(dev, "rx");
-	
+
 	if (!chan && plat->dma_rx_param) {
 		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
 
@@ -2045,6 +2045,34 @@ static struct console amba_console = {
 };
 
 #define AMBA_CONSOLE	(&amba_console)
+
+static void pl011_putc(struct uart_port *port, int c)
+{
+	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
+		;
+	writeb(c, port->membase + UART01x_DR);
+	while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
+		;
+}
+
+static void pl011_early_write(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, pl011_putc);
+}
+
+static int __init pl011_early_console_setup(struct earlycon_device *device,
+					    const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = pl011_early_write;
+	return 0;
+}
+EARLYCON_DECLARE(pl011, pl011_early_console_setup);
+
 #else
 #define AMBA_CONSOLE	NULL
 #endif
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 53eeea13ff16..3fceae099c44 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -43,6 +43,9 @@
 #include <linux/platform_data/atmel.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/irq.h>
 
 #include <asm/io.h>
 #include <asm/ioctls.h>
@@ -57,6 +60,8 @@
 
 #include <linux/serial_core.h>
 
+#include "serial_mctrl_gpio.h"
+
 static void atmel_start_rx(struct uart_port *port);
 static void atmel_stop_rx(struct uart_port *port);
 
@@ -162,8 +167,10 @@ struct atmel_uart_port {
 	struct circ_buf		rx_ring;
 
 	struct serial_rs485	rs485;		/* rs485 settings */
-	int			rts_gpio;	/* optional RTS GPIO */
+	struct mctrl_gpios	*gpios;
+	int			gpio_irq[UART_GPIO_MAX];
 	unsigned int		tx_done_mask;
+	bool			ms_irq_enabled;
 	bool			is_usart;	/* usart or uart */
 	struct timer_list	uart_timer;	/* uart timer */
 	int (*prepare_rx)(struct uart_port *port);
@@ -237,6 +244,50 @@ static bool atmel_use_dma_rx(struct uart_port *port)
 	return atmel_port->use_dma_rx;
 }
 
+static unsigned int atmel_get_lines_status(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	unsigned int status, ret = 0;
+
+	status = UART_GET_CSR(port);
+
+	mctrl_gpio_get(atmel_port->gpios, &ret);
+
+	if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+						UART_GPIO_CTS))) {
+		if (ret & TIOCM_CTS)
+			status &= ~ATMEL_US_CTS;
+		else
+			status |= ATMEL_US_CTS;
+	}
+
+	if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+						UART_GPIO_DSR))) {
+		if (ret & TIOCM_DSR)
+			status &= ~ATMEL_US_DSR;
+		else
+			status |= ATMEL_US_DSR;
+	}
+
+	if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+						UART_GPIO_RI))) {
+		if (ret & TIOCM_RI)
+			status &= ~ATMEL_US_RI;
+		else
+			status |= ATMEL_US_RI;
+	}
+
+	if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+						UART_GPIO_DCD))) {
+		if (ret & TIOCM_CD)
+			status &= ~ATMEL_US_DCD;
+		else
+			status |= ATMEL_US_DCD;
+	}
+
+	return status;
+}
+
 /* Enable or disable the rs485 support */
 void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 {
@@ -296,17 +347,6 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 	unsigned int mode;
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	/*
-	 * AT91RM9200 Errata #39: RTS0 is not internally connected
-	 * to PA21. We need to drive the pin as a GPIO.
-	 */
-	if (gpio_is_valid(atmel_port->rts_gpio)) {
-		if (mctrl & TIOCM_RTS)
-			gpio_set_value(atmel_port->rts_gpio, 0);
-		else
-			gpio_set_value(atmel_port->rts_gpio, 1);
-	}
-
 	if (mctrl & TIOCM_RTS)
 		control |= ATMEL_US_RTSEN;
 	else
@@ -319,6 +359,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 
 	UART_PUT_CR(port, control);
 
+	mctrl_gpio_set(atmel_port->gpios, mctrl);
+
 	/* Local loopback mode? */
 	mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
 	if (mctrl & TIOCM_LOOP)
@@ -346,7 +388,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
  */
 static u_int atmel_get_mctrl(struct uart_port *port)
 {
-	unsigned int status, ret = 0;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	unsigned int ret = 0, status;
 
 	status = UART_GET_CSR(port);
 
@@ -362,7 +405,7 @@ static u_int atmel_get_mctrl(struct uart_port *port)
 	if (!(status & ATMEL_US_RI))
 		ret |= TIOCM_RI;
 
-	return ret;
+	return mctrl_gpio_get(atmel_port->gpios, &ret);
 }
 
 /*
@@ -449,8 +492,38 @@ static void atmel_stop_rx(struct uart_port *port)
  */
 static void atmel_enable_ms(struct uart_port *port)
 {
-	UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
-			| ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	uint32_t ier = 0;
+
+	/*
+	 * Interrupt should not be enabled twice
+	 */
+	if (atmel_port->ms_irq_enabled)
+		return;
+
+	atmel_port->ms_irq_enabled = true;
+
+	if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+		enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+	else
+		ier |= ATMEL_US_CTSIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+		enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+	else
+		ier |= ATMEL_US_DSRIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+		enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+	else
+		ier |= ATMEL_US_RIIC;
+
+	if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+		enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+	else
+		ier |= ATMEL_US_DCDIC;
+
+	UART_PUT_IER(port, ier);
 }
 
 /*
@@ -1039,11 +1112,31 @@ atmel_handle_status(struct uart_port *port, unsigned int pending,
 static irqreturn_t atmel_interrupt(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned int status, pending, pass_counter = 0;
+	bool gpio_handled = false;
 
 	do {
-		status = UART_GET_CSR(port);
+		status = atmel_get_lines_status(port);
 		pending = status & UART_GET_IMR(port);
+		if (!gpio_handled) {
+			/*
+			 * Dealing with GPIO interrupt
+			 */
+			if (irq == atmel_port->gpio_irq[UART_GPIO_CTS])
+				pending |= ATMEL_US_CTSIC;
+
+			if (irq == atmel_port->gpio_irq[UART_GPIO_DSR])
+				pending |= ATMEL_US_DSRIC;
+
+			if (irq == atmel_port->gpio_irq[UART_GPIO_RI])
+				pending |= ATMEL_US_RIIC;
+
+			if (irq == atmel_port->gpio_irq[UART_GPIO_DCD])
+				pending |= ATMEL_US_DCDIC;
+
+			gpio_handled = true;
+		}
 		if (!pending)
 			break;
 
@@ -1523,6 +1616,45 @@ static void atmel_get_ip_name(struct uart_port *port)
 	}
 }
 
+static void atmel_free_gpio_irq(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	enum mctrl_gpio_idx i;
+
+	for (i = 0; i < UART_GPIO_MAX; i++)
+		if (atmel_port->gpio_irq[i] >= 0)
+			free_irq(atmel_port->gpio_irq[i], port);
+}
+
+static int atmel_request_gpio_irq(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	int *irq = atmel_port->gpio_irq;
+	enum mctrl_gpio_idx i;
+	int err = 0;
+
+	for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
+		if (irq[i] < 0)
+			continue;
+
+		irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
+		err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH,
+				  "atmel_serial", port);
+		if (err)
+			dev_err(port->dev, "atmel_startup - Can't get %d irq\n",
+				irq[i]);
+	}
+
+	/*
+	 * If something went wrong, rollback.
+	 */
+	while (err && (--i >= 0))
+		if (irq[i] >= 0)
+			free_irq(irq[i], port);
+
+	return err;
+}
+
 /*
  * Perform initialization and enable port for reception
  */
@@ -1539,6 +1671,7 @@ static int atmel_startup(struct uart_port *port)
 	 * handle an unexpected interrupt
 	 */
 	UART_PUT_IDR(port, -1);
+	atmel_port->ms_irq_enabled = false;
 
 	/*
 	 * Allocate the IRQ
@@ -1551,6 +1684,13 @@ static int atmel_startup(struct uart_port *port)
 	}
 
 	/*
+	 * Get the GPIO lines IRQ
+	 */
+	retval = atmel_request_gpio_irq(port);
+	if (retval)
+		goto free_irq;
+
+	/*
 	 * Initialize DMA (if necessary)
 	 */
 	atmel_init_property(atmel_port, pdev);
@@ -1568,7 +1708,7 @@ static int atmel_startup(struct uart_port *port)
 	}
 
 	/* Save current CSR for comparison in atmel_tasklet_func() */
-	atmel_port->irq_status_prev = UART_GET_CSR(port);
+	atmel_port->irq_status_prev = atmel_get_lines_status(port);
 	atmel_port->irq_status = atmel_port->irq_status_prev;
 
 	/*
@@ -1614,6 +1754,11 @@ static int atmel_startup(struct uart_port *port)
 	}
 
 	return 0;
+
+free_irq:
+	free_irq(port->irq, port);
+
+	return retval;
 }
 
 /*
@@ -1661,9 +1806,12 @@ static void atmel_shutdown(struct uart_port *port)
 	atmel_port->rx_ring.tail = 0;
 
 	/*
-	 * Free the interrupt
+	 * Free the interrupts
 	 */
 	free_irq(port->irq, port);
+	atmel_free_gpio_irq(port);
+
+	atmel_port->ms_irq_enabled = false;
 }
 
 /*
@@ -2324,6 +2472,26 @@ static int atmel_serial_resume(struct platform_device *pdev)
 #define atmel_serial_resume NULL
 #endif
 
+static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
+{
+	enum mctrl_gpio_idx i;
+	struct gpio_desc *gpiod;
+
+	p->gpios = mctrl_gpio_init(dev, 0);
+	if (IS_ERR_OR_NULL(p->gpios))
+		return -1;
+
+	for (i = 0; i < UART_GPIO_MAX; i++) {
+		gpiod = mctrl_gpio_to_gpiod(p->gpios, i);
+		if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+			p->gpio_irq[i] = gpiod_to_irq(gpiod);
+		else
+			p->gpio_irq[i] = -EINVAL;
+	}
+
+	return 0;
+}
+
 static int atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *port;
@@ -2359,25 +2527,11 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	port = &atmel_ports[ret];
 	port->backup_imr = 0;
 	port->uart.line = ret;
-	port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
-	if (pdata)
-		port->rts_gpio = pdata->rts_gpio;
-	else if (np)
-		port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
-
-	if (gpio_is_valid(port->rts_gpio)) {
-		ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
-		if (ret) {
-			dev_err(&pdev->dev, "error requesting RTS GPIO\n");
-			goto err;
-		}
-		/* Default to 1 as RTS is active low */
-		ret = gpio_direction_output(port->rts_gpio, 1);
-		if (ret) {
-			dev_err(&pdev->dev, "error setting up RTS GPIO\n");
-			goto err;
-		}
-	}
+
+	ret = atmel_init_gpios(port, &pdev->dev);
+	if (ret < 0)
+		dev_err(&pdev->dev, "%s",
+			"Failed to initialize GPIOs. The serial port may not work as expected");
 
 	ret = atmel_init_port(port, pdev);
 	if (ret)
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 7d76214612c7..aa60e6d13eca 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -971,7 +971,7 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
  * Note that this is called with interrupts already disabled
  */
 static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
-		const char *string, u_int count)
+		const char *string, u_int count, bool handle_linefeed)
 {
 	unsigned int i;
 	cbd_t __iomem *bdp, *bdbase;
@@ -1013,7 +1013,7 @@ static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
 			bdp++;
 
 		/* if a LF, also do CR... */
-		if (*string == 10) {
+		if (handle_linefeed && *string == 10) {
 			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
 				;
 
@@ -1111,7 +1111,7 @@ static void cpm_put_poll_char(struct uart_port *port,
 	static char ch[2];
 
 	ch[0] = (char)c;
-	cpm_uart_early_write(pinfo, ch, 1);
+	cpm_uart_early_write(pinfo, ch, 1, false);
 }
 #endif /* CONFIG_CONSOLE_POLL */
 
@@ -1275,7 +1275,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&pinfo->port.lock, flags);
 	}
 
-	cpm_uart_early_write(pinfo, s, count);
+	cpm_uart_early_write(pinfo, s, count, true);
 
 	if (unlikely(nolock)) {
 		local_irq_restore(flags);
diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c
new file mode 100644
index 000000000000..383db10fbb49
--- /dev/null
+++ b/drivers/tty/serial/earlycon-arm-semihost.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEMIHOST_SWI	"0xab"
+#else
+#define SEMIHOST_SWI	"0x123456"
+#endif
+
+/*
+ * Semihosting-based debug console
+ */
+static void smh_putc(struct uart_port *port, int c)
+{
+#ifdef CONFIG_ARM64
+	asm volatile("mov  x1, %0\n"
+		     "mov  x0, #3\n"
+		     "hlt  0xf000\n"
+		     : : "r" (&c) : "x0", "x1", "memory");
+#else
+	asm volatile("mov  r1, %0\n"
+		     "mov  r0, #3\n"
+		     "svc  " SEMIHOST_SWI "\n"
+		     : : "r" (&c) : "r0", "r1", "memory");
+#endif
+}
+
+static void smh_write(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+	uart_console_write(&dev->port, s, n, smh_putc);
+}
+
+int __init early_smh_setup(struct earlycon_device *device, const char *opt)
+{
+	device->con->write = smh_write;
+	return 0;
+}
+EARLYCON_DECLARE(smh, early_smh_setup);
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
new file mode 100644
index 000000000000..c92e83088adb
--- /dev/null
+++ b/drivers/tty/serial/earlycon.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * Based on 8250 earlycon:
+ * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/fixmap.h>
+#endif
+
+#include <asm/serial.h>
+
+static struct console early_con = {
+	.name =		"earlycon",
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
+	.index =	-1,
+};
+
+static struct earlycon_device early_console_dev = {
+	.con = &early_con,
+};
+
+static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
+{
+	void __iomem *base;
+#ifdef CONFIG_FIX_EARLYCON_MEM
+	set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK);
+	base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+	base += paddr & ~PAGE_MASK;
+#else
+	base = ioremap(paddr, size);
+#endif
+	if (!base)
+		pr_err("%s: Couldn't map 0x%llx\n", __func__,
+		       (unsigned long long)paddr);
+
+	return base;
+}
+
+static int __init parse_options(struct earlycon_device *device,
+				char *options)
+{
+	struct uart_port *port = &device->port;
+	int mmio, mmio32, length;
+	unsigned long addr;
+
+	if (!options)
+		return -ENODEV;
+
+	mmio = !strncmp(options, "mmio,", 5);
+	mmio32 = !strncmp(options, "mmio32,", 7);
+	if (mmio || mmio32) {
+		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+		options += mmio ? 5 : 7;
+		addr = simple_strtoul(options, NULL, 0);
+		port->mapbase = addr;
+		if (mmio32)
+			port->regshift = 2;
+	} else if (!strncmp(options, "io,", 3)) {
+		port->iotype = UPIO_PORT;
+		options += 3;
+		addr = simple_strtoul(options, NULL, 0);
+		port->iobase = addr;
+		mmio = 0;
+	} else if (!strncmp(options, "0x", 2)) {
+		port->iotype = UPIO_MEM;
+		addr = simple_strtoul(options, NULL, 0);
+		port->mapbase = addr;
+	} else {
+		return -EINVAL;
+	}
+
+	port->uartclk = BASE_BAUD * 16;
+
+	options = strchr(options, ',');
+	if (options) {
+		options++;
+		device->baud = simple_strtoul(options, NULL, 0);
+		length = min(strcspn(options, " ") + 1,
+			     (size_t)(sizeof(device->options)));
+		strlcpy(device->options, options, length);
+	}
+
+	if (mmio || mmio32)
+		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+			mmio32 ? "32" : "",
+			(unsigned long long)port->mapbase,
+			device->options);
+	else
+		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
+			port->iobase,
+			device->options);
+
+	return 0;
+}
+
+int __init setup_earlycon(char *buf, const char *match,
+			  int (*setup)(struct earlycon_device *, const char *))
+{
+	int err;
+	size_t len;
+	struct uart_port *port = &early_console_dev.port;
+
+	if (!buf || !match || !setup)
+		return 0;
+
+	len = strlen(match);
+	if (strncmp(buf, match, len))
+		return 0;
+	if (buf[len] && (buf[len] != ','))
+		return 0;
+
+	buf += len + 1;
+
+	err = parse_options(&early_console_dev, buf);
+	/* On parsing error, pass the options buf to the setup function */
+	if (!err)
+		buf = NULL;
+
+	if (port->mapbase)
+		port->membase = earlycon_map(port->mapbase, 64);
+
+	early_console_dev.con->data = &early_console_dev;
+	err = setup(&early_console_dev, buf);
+	if (err < 0)
+		return err;
+	if (!early_console_dev.con->write)
+		return -ENODEV;
+
+	register_console(early_console_dev.con);
+	return 0;
+}
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index c167a710dc39..b373f6416e8c 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -842,6 +842,7 @@ static void __exit efm32_uart_exit(void)
 	platform_driver_unregister(&efm32_uart_driver);
 	uart_unregister_driver(&efm32_uart_reg);
 }
+module_exit(efm32_uart_exit);
 
 MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
 MODULE_DESCRIPTION("EFM32 UART/USART driver");
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3b6c1a2e25de..e2f93874989b 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -116,7 +116,7 @@
 #define UCR3_DSR	(1<<10) /* Data set ready */
 #define UCR3_DCD	(1<<9)	/* Data carrier detect */
 #define UCR3_RI		(1<<8)	/* Ring indicator */
-#define UCR3_TIMEOUTEN	(1<<7)	/* Timeout interrupt enable */
+#define UCR3_ADNIMP	(1<<7)	/* Autobaud Detection Not Improved */
 #define UCR3_RXDSEN	(1<<6)	/* Receive status interrupt enable */
 #define UCR3_AIRINTEN	(1<<5)	/* Async IR wake interrupt enable */
 #define UCR3_AWAKEN	(1<<4)	/* Async wake interrupt enable */
@@ -444,6 +444,10 @@ static void imx_stop_rx(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR2);
 	writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+
+	/* disable the `Receiver Ready Interrrupt` */
+	temp = readl(sport->port.membase + UCR1);
+	writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
 }
 
 /*
@@ -1070,7 +1074,7 @@ static void imx_disable_dma(struct imx_port *sport)
 static int imx_startup(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	int retval;
+	int retval, i;
 	unsigned long flags, temp;
 
 	retval = clk_prepare_enable(sport->clk_per);
@@ -1098,17 +1102,15 @@ static int imx_startup(struct uart_port *port)
 
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
-	if (USE_IRDA(sport)) {
-		/* reset fifo's and state machines */
-		int i = 100;
-		temp = readl(sport->port.membase + UCR2);
-		temp &= ~UCR2_SRST;
-		writel(temp, sport->port.membase + UCR2);
-		while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
-		    (--i > 0)) {
-			udelay(1);
-		}
-	}
+	/* Reset fifo's and state machines */
+	i = 100;
+
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~UCR2_SRST;
+	writel(temp, sport->port.membase + UCR2);
+
+	while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
+		udelay(1);
 
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
@@ -1163,18 +1165,9 @@ static int imx_startup(struct uart_port *port)
 		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
-	if (USE_IRDA(sport)) {
-		/* clear RX-FIFO */
-		int i = 64;
-		while ((--i > 0) &&
-			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
-			barrier();
-		}
-	}
-
 	if (!is_imx1_uart(sport)) {
 		temp = readl(sport->port.membase + UCR3);
-		temp |= IMX21_UCR3_RXDMUXSEL;
+		temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
 		writel(temp, sport->port.membase + UCR3);
 	}
 
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 5f673b7ca50e..cfadf2971b12 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -44,13 +44,22 @@ MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)");
 
 static bool kgdb_nmi_tty_enabled;
 
+static int kgdb_nmi_console_setup(struct console *co, char *options)
+{
+	/* The NMI console uses the dbg_io_ops to issue console messages. To
+	 * avoid duplicate messages during kdb sessions we must inform kdb's
+	 * I/O utilities that messages sent to the console will automatically
+	 * be displayed on the dbg_io.
+	 */
+	dbg_io_ops->is_console = true;
+
+	return 0;
+}
+
 static void kgdb_nmi_console_write(struct console *co, const char *s, uint c)
 {
 	int i;
 
-	if (!kgdb_nmi_tty_enabled || atomic_read(&kgdb_active) >= 0)
-		return;
-
 	for (i = 0; i < c; i++)
 		dbg_io_ops->write_char(s[i]);
 }
@@ -65,6 +74,7 @@ static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx)
 
 static struct console kgdb_nmi_console = {
 	.name	= "ttyNMI",
+	.setup  = kgdb_nmi_console_setup,
 	.write	= kgdb_nmi_console_write,
 	.device	= kgdb_nmi_console_device,
 	.flags	= CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED,
@@ -80,29 +90,10 @@ static struct console kgdb_nmi_console = {
 
 struct kgdb_nmi_tty_priv {
 	struct tty_port port;
-	struct tasklet_struct tlet;
+	struct timer_list timer;
 	STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo;
 };
 
-static struct kgdb_nmi_tty_priv *kgdb_nmi_port_to_priv(struct tty_port *port)
-{
-	return container_of(port, struct kgdb_nmi_tty_priv, port);
-}
-
-/*
- * Our debugging console is polled in a tasklet, so we'll check for input
- * every tick. In HZ-less mode, we should program the next tick.  We have
- * to use the lowlevel stuff as no locks should be grabbed.
- */
-#ifdef CONFIG_HIGH_RES_TIMERS
-static void kgdb_tty_poke(void)
-{
-	tick_program_event(ktime_get(), 0);
-}
-#else
-static inline void kgdb_tty_poke(void) {}
-#endif
-
 static struct tty_port *kgdb_nmi_port;
 
 static void kgdb_tty_recv(int ch)
@@ -113,14 +104,13 @@ static void kgdb_tty_recv(int ch)
 	if (!kgdb_nmi_port || ch < 0)
 		return;
 	/*
-	 * Can't use port->tty->driver_data as tty might be not there. Tasklet
+	 * Can't use port->tty->driver_data as tty might be not there. Timer
 	 * will check for tty and will get the ref, but here we don't have to
 	 * do that, and actually, we can't: we're in NMI context, no locks are
 	 * possible.
 	 */
-	priv = kgdb_nmi_port_to_priv(kgdb_nmi_port);
+	priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port);
 	kfifo_in(&priv->fifo, &c, 1);
-	kgdb_tty_poke();
 }
 
 static int kgdb_nmi_poll_one_knock(void)
@@ -204,7 +194,8 @@ static void kgdb_nmi_tty_receiver(unsigned long data)
 	struct kgdb_nmi_tty_priv *priv = (void *)data;
 	char ch;
 
-	tasklet_schedule(&priv->tlet);
+	priv->timer.expires = jiffies + (HZ/100);
+	add_timer(&priv->timer);
 
 	if (likely(!kgdb_nmi_tty_enabled || !kfifo_len(&priv->fifo)))
 		return;
@@ -216,18 +207,22 @@ static void kgdb_nmi_tty_receiver(unsigned long data)
 
 static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty)
 {
-	struct kgdb_nmi_tty_priv *priv = tty->driver_data;
+	struct kgdb_nmi_tty_priv *priv =
+	    container_of(port, struct kgdb_nmi_tty_priv, port);
 
 	kgdb_nmi_port = port;
-	tasklet_schedule(&priv->tlet);
+	priv->timer.expires = jiffies + (HZ/100);
+	add_timer(&priv->timer);
+
 	return 0;
 }
 
 static void kgdb_nmi_tty_shutdown(struct tty_port *port)
 {
-	struct kgdb_nmi_tty_priv *priv = port->tty->driver_data;
+	struct kgdb_nmi_tty_priv *priv =
+	    container_of(port, struct kgdb_nmi_tty_priv, port);
 
-	tasklet_kill(&priv->tlet);
+	del_timer(&priv->timer);
 	kgdb_nmi_port = NULL;
 }
 
@@ -246,7 +241,7 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
 		return -ENOMEM;
 
 	INIT_KFIFO(priv->fifo);
-	tasklet_init(&priv->tlet, kgdb_nmi_tty_receiver, (unsigned long)priv);
+	setup_timer(&priv->timer, kgdb_nmi_tty_receiver, (unsigned long)priv);
 	tty_port_init(&priv->port);
 	priv->port.ops = &kgdb_nmi_tty_port_ops;
 	tty->driver_data = priv;
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
new file mode 100644
index 000000000000..c9d18548783a
--- /dev/null
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -0,0 +1,867 @@
+/*
+ * MEN 16z135 High Speed UART
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/tty_flip.h>
+#include <linux/bitops.h>
+#include <linux/mcb.h>
+
+#define MEN_Z135_MAX_PORTS		12
+#define MEN_Z135_BASECLK		29491200
+#define MEN_Z135_FIFO_SIZE		1024
+#define MEN_Z135_NUM_MSI_VECTORS	2
+#define MEN_Z135_FIFO_WATERMARK		1020
+
+#define MEN_Z135_STAT_REG		0x0
+#define MEN_Z135_RX_RAM			0x4
+#define MEN_Z135_TX_RAM			0x400
+#define MEN_Z135_RX_CTRL		0x800
+#define MEN_Z135_TX_CTRL		0x804
+#define MEN_Z135_CONF_REG		0x808
+#define MEN_Z135_UART_FREQ		0x80c
+#define MEN_Z135_BAUD_REG		0x810
+#define MENZ135_TIMEOUT			0x814
+
+#define MEN_Z135_MEM_SIZE		0x818
+
+#define IS_IRQ(x) ((x) & 1)
+#define IRQ_ID(x) (((x) >> 1) & 7)
+
+#define MEN_Z135_IER_RXCIEN BIT(0)		/* RX Space IRQ */
+#define MEN_Z135_IER_TXCIEN BIT(1)		/* TX Space IRQ */
+#define MEN_Z135_IER_RLSIEN BIT(2)		/* Receiver Line Status IRQ */
+#define MEN_Z135_IER_MSIEN  BIT(3)		/* Modem Status IRQ */
+#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN		\
+				| MEN_Z135_IER_RLSIEN	\
+				| MEN_Z135_IER_MSIEN	\
+				| MEN_Z135_IER_TXCIEN)
+
+#define MEN_Z135_MCR_DTR	BIT(24)
+#define MEN_Z135_MCR_RTS	BIT(25)
+#define MEN_Z135_MCR_OUT1	BIT(26)
+#define MEN_Z135_MCR_OUT2	BIT(27)
+#define MEN_Z135_MCR_LOOP	BIT(28)
+#define MEN_Z135_MCR_RCFC	BIT(29)
+
+#define MEN_Z135_MSR_DCTS	BIT(0)
+#define MEN_Z135_MSR_DDSR	BIT(1)
+#define MEN_Z135_MSR_DRI	BIT(2)
+#define MEN_Z135_MSR_DDCD	BIT(3)
+#define MEN_Z135_MSR_CTS	BIT(4)
+#define MEN_Z135_MSR_DSR	BIT(5)
+#define MEN_Z135_MSR_RI		BIT(6)
+#define MEN_Z135_MSR_DCD	BIT(7)
+
+#define MEN_Z135_LCR_SHIFT 8	/* LCR shift mask */
+
+#define MEN_Z135_WL5 0		/* CS5 */
+#define MEN_Z135_WL6 1		/* CS6 */
+#define MEN_Z135_WL7 2		/* CS7 */
+#define MEN_Z135_WL8 3		/* CS8 */
+
+#define MEN_Z135_STB_SHIFT 2	/* Stopbits */
+#define MEN_Z135_NSTB1 0
+#define MEN_Z135_NSTB2 1
+
+#define MEN_Z135_PEN_SHIFT 3	/* Parity enable */
+#define MEN_Z135_PAR_DIS 0
+#define MEN_Z135_PAR_ENA 1
+
+#define MEN_Z135_PTY_SHIFT 4	/* Parity type */
+#define MEN_Z135_PTY_ODD 0
+#define MEN_Z135_PTY_EVN 1
+
+#define MEN_Z135_LSR_DR BIT(0)
+#define MEN_Z135_LSR_OE BIT(1)
+#define MEN_Z135_LSR_PE BIT(2)
+#define MEN_Z135_LSR_FE BIT(3)
+#define MEN_Z135_LSR_BI BIT(4)
+#define MEN_Z135_LSR_THEP BIT(5)
+#define MEN_Z135_LSR_TEXP BIT(6)
+#define MEN_Z135_LSR_RXFIFOERR BIT(7)
+
+#define MEN_Z135_IRQ_ID_MST 0
+#define MEN_Z135_IRQ_ID_TSA 1
+#define MEN_Z135_IRQ_ID_RDA 2
+#define MEN_Z135_IRQ_ID_RLS 3
+#define MEN_Z135_IRQ_ID_CTI 6
+
+#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
+
+#define BYTES_TO_ALIGN(x) ((x) & 0x3)
+
+static int line;
+
+static int txlvl = 5;
+module_param(txlvl, int, S_IRUGO);
+MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)");
+
+static int rxlvl = 6;
+module_param(rxlvl, int, S_IRUGO);
+MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)");
+
+static int align;
+module_param(align, int, S_IRUGO);
+MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
+
+struct men_z135_port {
+	struct uart_port port;
+	struct mcb_device *mdev;
+	unsigned char *rxbuf;
+	u32 stat_reg;
+	spinlock_t lock;
+};
+#define to_men_z135(port) container_of((port), struct men_z135_port, port)
+
+/**
+ * men_z135_reg_set() - Set value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to set
+ */
+static inline void men_z135_reg_set(struct men_z135_port *uart,
+				u32 addr, u32 val)
+{
+	struct uart_port *port = &uart->port;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&uart->lock, flags);
+
+	reg = ioread32(port->membase + addr);
+	reg |= val;
+	iowrite32(reg, port->membase + addr);
+
+	spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_reg_clr() - Unset value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to clear
+ */
+static inline void men_z135_reg_clr(struct men_z135_port *uart,
+				u32 addr, u32 val)
+{
+	struct uart_port *port = &uart->port;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&uart->lock, flags);
+
+	reg = ioread32(port->membase + addr);
+	reg &= ~val;
+	iowrite32(reg, port->membase + addr);
+
+	spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_handle_modem_status() - Handle change of modem status
+ * @port: The UART port
+ *
+ * Handle change of modem status register. This is done by reading the "delta"
+ * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
+ */
+static void men_z135_handle_modem_status(struct men_z135_port *uart)
+{
+	if (uart->stat_reg & MEN_Z135_MSR_DDCD)
+		uart_handle_dcd_change(&uart->port,
+				uart->stat_reg & ~MEN_Z135_MSR_DCD);
+	if (uart->stat_reg & MEN_Z135_MSR_DCTS)
+		uart_handle_cts_change(&uart->port,
+				uart->stat_reg & ~MEN_Z135_MSR_CTS);
+}
+
+static void men_z135_handle_lsr(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	u8 lsr;
+
+	lsr = (uart->stat_reg >> 16) & 0xff;
+
+	if (lsr & MEN_Z135_LSR_OE)
+		port->icount.overrun++;
+	if (lsr & MEN_Z135_LSR_PE)
+		port->icount.parity++;
+	if (lsr & MEN_Z135_LSR_FE)
+		port->icount.frame++;
+	if (lsr & MEN_Z135_LSR_BI) {
+		port->icount.brk++;
+		uart_handle_break(port);
+	}
+}
+
+/**
+ * get_rx_fifo_content() - Get the number of bytes in RX FIFO
+ * @uart: The UART port
+ *
+ * Read RXC register from hardware and return current FIFO fill size.
+ */
+static u16 get_rx_fifo_content(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	u32 stat_reg;
+	u16 rxc;
+	u8 rxc_lo;
+	u8 rxc_hi;
+
+	stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+	rxc_lo = stat_reg >> 24;
+	rxc_hi = (stat_reg & 0xC0) >> 6;
+
+	rxc = rxc_lo | (rxc_hi << 8);
+
+	return rxc;
+}
+
+/**
+ * men_z135_handle_rx() - RX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ * Copy from RX FIFO and acknowledge number of bytes copied.
+ */
+static void men_z135_handle_rx(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	struct tty_port *tport = &port->state->port;
+	int copied;
+	u16 size;
+	int room;
+
+	size = get_rx_fifo_content(uart);
+
+	if (size == 0)
+		return;
+
+	/* Avoid accidently accessing TX FIFO instead of RX FIFO. Last
+	 * longword in RX FIFO cannot be read.(0x004-0x3FF)
+	 */
+	if (size > MEN_Z135_FIFO_WATERMARK)
+		size = MEN_Z135_FIFO_WATERMARK;
+
+	room = tty_buffer_request_room(tport, size);
+	if (room != size)
+		dev_warn(&uart->mdev->dev,
+			"Not enough room in flip buffer, truncating to %d\n",
+			room);
+
+	if (room == 0)
+		return;
+
+	memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room);
+	/* Be sure to first copy all data and then acknowledge it */
+	mb();
+	iowrite32(room, port->membase +  MEN_Z135_RX_CTRL);
+
+	copied = tty_insert_flip_string(tport, uart->rxbuf, room);
+	if (copied != room)
+		dev_warn(&uart->mdev->dev,
+			"Only copied %d instead of %d bytes\n",
+			copied, room);
+
+	port->icount.rx += copied;
+
+	tty_flip_buffer_push(tport);
+
+}
+
+/**
+ * men_z135_handle_tx() - TX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ */
+static void men_z135_handle_tx(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	u32 txc;
+	u32 wptr;
+	int qlen;
+	int n;
+	int txfree;
+	int head;
+	int tail;
+	int s;
+
+	if (uart_circ_empty(xmit))
+		goto out;
+
+	if (uart_tx_stopped(port))
+		goto out;
+
+	if (port->x_char)
+		goto out;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	/* calculate bytes to copy */
+	qlen = uart_circ_chars_pending(xmit);
+	if (qlen <= 0)
+		goto out;
+
+	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+	txc = (wptr >> 16) & 0x3ff;
+	wptr &= 0x3ff;
+
+	if (txc > MEN_Z135_FIFO_WATERMARK)
+		txc = MEN_Z135_FIFO_WATERMARK;
+
+	txfree = MEN_Z135_FIFO_WATERMARK - txc;
+	if (txfree <= 0) {
+		pr_err("Not enough room in TX FIFO have %d, need %d\n",
+			txfree, qlen);
+		goto irq_en;
+	}
+
+	/* if we're not aligned, it's better to copy only 1 or 2 bytes and
+	 * then the rest.
+	 */
+	if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr))
+		n = 4 - BYTES_TO_ALIGN(wptr);
+	else if (qlen > txfree)
+		n = txfree;
+	else
+		n = qlen;
+
+	if (n <= 0)
+		goto irq_en;
+
+	head = xmit->head & (UART_XMIT_SIZE - 1);
+	tail = xmit->tail & (UART_XMIT_SIZE - 1);
+
+	s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
+	n = min(n, s);
+
+	memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
+	xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1);
+	mmiowb();
+
+	iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
+
+	port->icount.tx += n;
+
+irq_en:
+	if (!uart_circ_empty(xmit))
+		men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+	else
+		men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+
+out:
+	return;
+
+}
+
+/**
+ * men_z135_intr() - Handle legacy IRQs
+ * @irq: The IRQ number
+ * @data: Pointer to UART port
+ *
+ * Check IIR register to see which tasklet to start.
+ */
+static irqreturn_t men_z135_intr(int irq, void *data)
+{
+	struct men_z135_port *uart = (struct men_z135_port *)data;
+	struct uart_port *port = &uart->port;
+	int irq_id;
+
+	uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+	/* IRQ pending is low active */
+	if (IS_IRQ(uart->stat_reg))
+		return IRQ_NONE;
+
+	irq_id = IRQ_ID(uart->stat_reg);
+	switch (irq_id) {
+	case MEN_Z135_IRQ_ID_MST:
+		men_z135_handle_modem_status(uart);
+		break;
+	case MEN_Z135_IRQ_ID_TSA:
+		men_z135_handle_tx(uart);
+		break;
+	case MEN_Z135_IRQ_ID_CTI:
+		dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
+		/* Fallthrough */
+	case MEN_Z135_IRQ_ID_RDA:
+		/* Reading data clears RX IRQ */
+		men_z135_handle_rx(uart);
+		break;
+	case MEN_Z135_IRQ_ID_RLS:
+		men_z135_handle_lsr(uart);
+		break;
+	default:
+		dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * men_z135_request_irq() - Request IRQ for 16z135 core
+ * @uart: z135 private uart port structure
+ *
+ * Request an IRQ for 16z135 to use. First try using MSI, if it fails
+ * fall back to using legacy interrupts.
+ */
+static int men_z135_request_irq(struct men_z135_port *uart)
+{
+	struct device *dev = &uart->mdev->dev;
+	struct uart_port *port = &uart->port;
+	int err = 0;
+
+	err = request_irq(port->irq, men_z135_intr, IRQF_SHARED,
+			"men_z135_intr", uart);
+	if (err)
+		dev_err(dev, "Error %d getting interrupt\n", err);
+
+	return err;
+}
+
+/**
+ * men_z135_tx_empty() - Handle tx_empty call
+ * @port: The UART port
+ *
+ * This function tests whether the TX FIFO and shifter for the port
+ * described by @port is empty.
+ */
+static unsigned int men_z135_tx_empty(struct uart_port *port)
+{
+	u32 wptr;
+	u16 txc;
+
+	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+	txc = (wptr >> 16) & 0x3ff;
+
+	if (txc == 0)
+		return TIOCSER_TEMT;
+	else
+		return 0;
+}
+
+/**
+ * men_z135_set_mctrl() - Set modem control lines
+ * @port: The UART port
+ * @mctrl: The modem control lines
+ *
+ * This function sets the modem control lines for a port described by @port
+ * to the state described by @mctrl
+ */
+static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	u32 conf_reg = 0;
+
+	if (mctrl & TIOCM_RTS)
+		conf_reg |= MEN_Z135_MCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		conf_reg |= MEN_Z135_MCR_DTR;
+	if (mctrl & TIOCM_OUT1)
+		conf_reg |= MEN_Z135_MCR_OUT1;
+	if (mctrl & TIOCM_OUT2)
+		conf_reg |= MEN_Z135_MCR_OUT2;
+	if (mctrl & TIOCM_LOOP)
+		conf_reg |= MEN_Z135_MCR_LOOP;
+
+	men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg);
+}
+
+/**
+ * men_z135_get_mctrl() - Get modem control lines
+ * @port: The UART port
+ *
+ * Retruns the current state of modem control inputs.
+ */
+static unsigned int men_z135_get_mctrl(struct uart_port *port)
+{
+	unsigned int mctrl = 0;
+	u32 stat_reg;
+	u8 msr;
+
+	stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+
+	msr = ~((stat_reg >> 8) & 0xff);
+
+	if (msr & MEN_Z135_MSR_CTS)
+		mctrl |= TIOCM_CTS;
+	if (msr & MEN_Z135_MSR_DSR)
+		mctrl |= TIOCM_DSR;
+	if (msr & MEN_Z135_MSR_RI)
+		mctrl |= TIOCM_RI;
+	if (msr & MEN_Z135_MSR_DCD)
+		mctrl |= TIOCM_CAR;
+
+	return mctrl;
+}
+
+/**
+ * men_z135_stop_tx() - Stop transmitting characters
+ * @port: The UART port
+ *
+ * Stop transmitting characters. This might be due to CTS line becomming
+ * inactive or the tty layer indicating we want to stop transmission due to
+ * an XOFF character.
+ */
+static void men_z135_stop_tx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+}
+
+/**
+ * men_z135_start_tx() - Start transmitting characters
+ * @port: The UART port
+ *
+ * Start transmitting character. This actually doesn't transmit anything, but
+ * fires off the TX tasklet.
+ */
+static void men_z135_start_tx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_handle_tx(uart);
+}
+
+/**
+ * men_z135_stop_rx() - Stop receiving characters
+ * @port: The UART port
+ *
+ * Stop receiving characters; the port is in the process of being closed.
+ */
+static void men_z135_stop_rx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN);
+}
+
+/**
+ * men_z135_enable_ms() - Enable Modem Status
+ * port:
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_enable_ms(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
+static int men_z135_startup(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	int err;
+	u32 conf_reg = 0;
+
+	err = men_z135_request_irq(uart);
+	if (err)
+		return -ENODEV;
+
+	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+
+	/* Activate all but TX space available IRQ */
+	conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN;
+	conf_reg &= ~(0xff << 16);
+	conf_reg |= (txlvl << 16);
+	conf_reg |= (rxlvl << 20);
+
+	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+	return 0;
+}
+
+static void men_z135_shutdown(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	u32 conf_reg = 0;
+
+	conf_reg |= MEN_Z135_ALL_IRQS;
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg);
+
+	free_irq(uart->port.irq, uart);
+}
+
+static void men_z135_set_termios(struct uart_port *port,
+				struct ktermios *termios,
+				struct ktermios *old)
+{
+	unsigned int baud;
+	u32 conf_reg;
+	u32 bd_reg;
+	u32 uart_freq;
+	u8 lcr;
+
+	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+	lcr = LCR(conf_reg);
+
+	/* byte size */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr |= MEN_Z135_WL5;
+		break;
+	case CS6:
+		lcr |= MEN_Z135_WL6;
+		break;
+	case CS7:
+		lcr |= MEN_Z135_WL7;
+		break;
+	case CS8:
+		lcr |= MEN_Z135_WL8;
+		break;
+	}
+
+	/* stop bits */
+	if (termios->c_cflag & CSTOPB)
+		lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT;
+
+	/* parity */
+	if (termios->c_cflag & PARENB) {
+		lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT;
+
+		if (termios->c_cflag & PARODD)
+			lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT;
+		else
+			lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT;
+	} else
+		lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
+
+	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
+	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+	uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ);
+	if (uart_freq == 0)
+		uart_freq = MEN_Z135_BASECLK;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
+
+	spin_lock(&port->lock);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	bd_reg = uart_freq / (4 * baud);
+	iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_unlock(&port->lock);
+}
+
+static const char *men_z135_type(struct uart_port *port)
+{
+	return KBUILD_MODNAME;
+}
+
+static void men_z135_release_port(struct uart_port *port)
+{
+	iounmap(port->membase);
+	port->membase = NULL;
+
+	release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+}
+
+static int men_z135_request_port(struct uart_port *port)
+{
+	int size = MEN_Z135_MEM_SIZE;
+
+	if (!request_mem_region(port->mapbase, size, "men_z135_port"))
+		return -EBUSY;
+
+	port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+	if (port->membase == NULL) {
+		release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void men_z135_config_port(struct uart_port *port, int type)
+{
+	port->type = PORT_MEN_Z135;
+	men_z135_request_port(port);
+}
+
+static int men_z135_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	return -EINVAL;
+}
+
+static struct uart_ops men_z135_ops = {
+	.tx_empty = men_z135_tx_empty,
+	.set_mctrl = men_z135_set_mctrl,
+	.get_mctrl = men_z135_get_mctrl,
+	.stop_tx = men_z135_stop_tx,
+	.start_tx = men_z135_start_tx,
+	.stop_rx = men_z135_stop_rx,
+	.enable_ms = men_z135_enable_ms,
+	.startup = men_z135_startup,
+	.shutdown = men_z135_shutdown,
+	.set_termios = men_z135_set_termios,
+	.type = men_z135_type,
+	.release_port = men_z135_release_port,
+	.request_port = men_z135_request_port,
+	.config_port = men_z135_config_port,
+	.verify_port = men_z135_verify_port,
+};
+
+static struct uart_driver men_z135_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = KBUILD_MODNAME,
+	.dev_name = "ttyHSU",
+	.major = 0,
+	.minor = 0,
+	.nr = MEN_Z135_MAX_PORTS,
+};
+
+/**
+ * men_z135_probe() - Probe a z135 instance
+ * @mdev: The MCB device
+ * @id: The MCB device ID
+ *
+ * men_z135_probe does the basic setup of hardware resources and registers the
+ * new uart port to the tty layer.
+ */
+static int men_z135_probe(struct mcb_device *mdev,
+			const struct mcb_device_id *id)
+{
+	struct men_z135_port *uart;
+	struct resource *mem;
+	struct device *dev;
+	int err;
+
+	dev = &mdev->dev;
+
+	uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL);
+	if (!uart)
+		return -ENOMEM;
+
+	uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!uart->rxbuf)
+		return -ENOMEM;
+
+	mem = &mdev->mem;
+
+	mcb_set_drvdata(mdev, uart);
+
+	uart->port.uartclk = MEN_Z135_BASECLK * 16;
+	uart->port.fifosize = MEN_Z135_FIFO_SIZE;
+	uart->port.iotype = UPIO_MEM;
+	uart->port.ops = &men_z135_ops;
+	uart->port.irq = mcb_get_irq(mdev);
+	uart->port.iotype = UPIO_MEM;
+	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	uart->port.line = line++;
+	uart->port.dev = dev;
+	uart->port.type = PORT_MEN_Z135;
+	uart->port.mapbase = mem->start;
+	uart->port.membase = NULL;
+	uart->mdev = mdev;
+
+	spin_lock_init(&uart->port.lock);
+	spin_lock_init(&uart->lock);
+
+	err = uart_add_one_port(&men_z135_driver, &uart->port);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	free_page((unsigned long) uart->rxbuf);
+	dev_err(dev, "Failed to add UART: %d\n", err);
+
+	return err;
+}
+
+/**
+ * men_z135_remove() - Remove a z135 instance from the system
+ *
+ * @mdev: The MCB device
+ */
+static void men_z135_remove(struct mcb_device *mdev)
+{
+	struct men_z135_port *uart = mcb_get_drvdata(mdev);
+
+	line--;
+	uart_remove_one_port(&men_z135_driver, &uart->port);
+	free_page((unsigned long) uart->rxbuf);
+}
+
+static const struct mcb_device_id men_z135_ids[] = {
+	{ .device = 0x87 },
+};
+MODULE_DEVICE_TABLE(mcb, men_z135_ids);
+
+static struct mcb_driver mcb_driver = {
+	.driver = {
+		.name = "z135-uart",
+		.owner = THIS_MODULE,
+	},
+	.probe = men_z135_probe,
+	.remove = men_z135_remove,
+	.id_table = men_z135_ids,
+};
+
+/**
+ * men_z135_init() - Driver Registration Routine
+ *
+ * men_z135_init is the first routine called when the driver is loaded. All it
+ * does is register with the legacy MEN Chameleon subsystem.
+ */
+static int __init men_z135_init(void)
+{
+	int err;
+
+	err = uart_register_driver(&men_z135_driver);
+	if (err) {
+		pr_err("Failed to register UART: %d\n", err);
+		return err;
+	}
+
+	err = mcb_register_driver(&mcb_driver);
+	if  (err) {
+		pr_err("Failed to register MCB driver: %d\n", err);
+		uart_unregister_driver(&men_z135_driver);
+		return err;
+	}
+
+	return 0;
+}
+module_init(men_z135_init);
+
+/**
+ * men_z135_exit() - Driver Exit Routine
+ *
+ * men_z135_exit is called just before the driver is removed from memory.
+ */
+static void __exit men_z135_exit(void)
+{
+	mcb_unregister_driver(&mcb_driver);
+	uart_unregister_driver(&men_z135_driver);
+}
+module_exit(men_z135_exit);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MEN 16z135 High Speed UART");
+MODULE_ALIAS("mcb:16z135");
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 7fd6aaaacd8e..be127d0da32c 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -29,7 +29,7 @@
 #include <asm/irq.h>
 #include <asm/parisc-device.h>
 
-#ifdef CONFIG_MAGIC_SYSRQ
+#if defined(CONFIG_SERIAL_MUX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #include <linux/sysrq.h>
 #define SUPPORT_SYSRQ
 #endif
@@ -613,7 +613,7 @@ static void __exit mux_exit(void)
 {
 	/* Delete the Mux timer. */
 	if(port_cnt > 0) {
-		del_timer(&mux_timer);
+		del_timer_sync(&mux_timer);
 #ifdef CONFIG_SERIAL_MUX_CONSOLE
 		unregister_console(&mux_console);
 #endif
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 99246606a256..68d4455f3cf9 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -173,6 +173,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	{
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
+		port.type = port_type;
 		port8250.port = port;
 
 		if (port.fifosize)
@@ -182,6 +183,10 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 					  "auto-flow-control"))
 			port8250.capabilities |= UART_CAP_AFE;
 
+		if (of_property_read_bool(ofdev->dev.of_node,
+					  "has-hw-flow-control"))
+			port8250.port.flags |= UPF_HARD_FLOW;
+
 		ret = serial8250_register_8250_port(&port8250);
 		break;
 	}
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 08b6b9419f0d..d017cec8a34a 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -163,10 +163,6 @@ struct uart_omap_port {
 	u8			wakeups_enabled;
 	u32			features;
 
-	int			DTR_gpio;
-	int			DTR_inverted;
-	int			DTR_active;
-
 	struct serial_rs485	rs485;
 	int			rts_gpio;
 
@@ -184,8 +180,6 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 /* Forward declaration of functions */
 static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
 
-static struct workqueue_struct *serial_omap_uart_wq;
-
 static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
 {
 	offset <<= up->port.regshift;
@@ -398,11 +392,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
 			break;
 	} while (--count > 0);
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
-		spin_unlock(&up->port.lock);
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&up->port);
-		spin_lock(&up->port.lock);
-	}
 
 	if (uart_circ_empty(xmit))
 		serial_omap_stop_tx(&up->port);
@@ -697,16 +688,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	serial_out(up, UART_MCR, up->mcr);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
-
-	if (gpio_is_valid(up->DTR_gpio) &&
-	    !!(mctrl & TIOCM_DTR) != up->DTR_active) {
-		up->DTR_active = !up->DTR_active;
-		if (gpio_cansleep(up->DTR_gpio))
-			schedule_work(&up->qos_work);
-		else
-			gpio_set_value(up->DTR_gpio,
-				       up->DTR_active != up->DTR_inverted);
-	}
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -850,9 +831,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
 						qos_work);
 
 	pm_qos_update_request(&up->pm_qos_request, up->latency);
-	if (gpio_is_valid(up->DTR_gpio))
-		gpio_set_value_cansleep(up->DTR_gpio,
-					up->DTR_active != up->DTR_inverted);
 }
 
 static void
@@ -1420,7 +1398,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case TIOCSRS485:
-		if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+		if (copy_from_user(&rs485conf, (void __user *) arg,
 					sizeof(rs485conf)))
 			return -EFAULT;
 
@@ -1428,7 +1406,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
 		break;
 
 	case TIOCGRS485:
-		if (copy_to_user((struct serial_rs485 *) arg,
+		if (copy_to_user((void __user *) arg,
 					&(to_uart_omap_port(port)->rs485),
 					sizeof(rs485conf)))
 			return -EFAULT;
@@ -1614,7 +1592,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	/* check for tx enable gpio */
 	up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
 	if (gpio_is_valid(up->rts_gpio)) {
-		ret = gpio_request(up->rts_gpio, "omap-serial");
+		ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
 		if (ret < 0)
 			return ret;
 		ret = gpio_direction_output(up->rts_gpio,
@@ -1644,10 +1622,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 
 static int serial_omap_probe(struct platform_device *pdev)
 {
-	struct uart_omap_port	*up;
-	struct resource		*mem, *irq;
 	struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
-	int ret, uartirq = 0, wakeirq = 0;
+	struct uart_omap_port *up;
+	struct resource *mem;
+	void __iomem *base;
+	int uartirq = 0;
+	int wakeirq = 0;
+	int ret;
 
 	/* The optional wakeirq may be specified in the board dts file */
 	if (pdev->dev.of_node) {
@@ -1658,48 +1639,19 @@ static int serial_omap_probe(struct platform_device *pdev)
 		omap_up_info = of_get_uart_port_info(&pdev->dev);
 		pdev->dev.platform_data = omap_up_info;
 	} else {
-		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-		if (!irq) {
-			dev_err(&pdev->dev, "no irq resource?\n");
-			return -ENODEV;
-		}
-		uartirq = irq->start;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
-
-	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
-				pdev->dev.driver->name)) {
-		dev_err(&pdev->dev, "memory region already claimed\n");
-		return -EBUSY;
-	}
-
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
-		if (ret < 0)
-			return ret;
-		ret = gpio_direction_output(omap_up_info->DTR_gpio,
-					    omap_up_info->DTR_inverted);
-		if (ret < 0)
-			return ret;
+		uartirq = platform_get_irq(pdev, 0);
+		if (uartirq < 0)
+			return -EPROBE_DEFER;
 	}
 
 	up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
 	if (!up)
 		return -ENOMEM;
 
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		up->DTR_gpio = omap_up_info->DTR_gpio;
-		up->DTR_inverted = omap_up_info->DTR_inverted;
-	} else
-		up->DTR_gpio = -EINVAL;
-	up->DTR_active = 0;
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	up->dev = &pdev->dev;
 	up->port.dev = &pdev->dev;
@@ -1733,14 +1685,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
-	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
-						resource_size(mem));
-	if (!up->port.membase) {
-		dev_err(&pdev->dev, "can't ioremap UART\n");
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
+	up->port.membase = base;
 	up->port.flags = omap_up_info->flags;
 	up->port.uartclk = omap_up_info->uartclk;
 	if (!up->port.uartclk) {
@@ -1754,12 +1699,12 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
 	pm_qos_add_request(&up->pm_qos_request,
 		PM_QOS_CPU_DMA_LATENCY, up->latency);
-	serial_omap_uart_wq = create_singlethread_workqueue(up->name);
 	INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
 
 	platform_set_drvdata(pdev, up);
 	if (omap_up_info->autosuspend_timeout == 0)
 		omap_up_info->autosuspend_timeout = -1;
+
 	device_init_wakeup(up->dev, true);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev,
@@ -1786,7 +1731,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 err_add_port:
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-err_ioremap:
 err_rs485:
 err_port_line:
 	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0931b3fe9edf..0cb6a8e52bd0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -257,6 +257,8 @@ struct eg20t_port {
 	dma_addr_t			rx_buf_dma;
 
 	struct dentry	*debugfs;
+#define IRQ_NAME_SIZE 17
+	char				irq_name[IRQ_NAME_SIZE];
 
 	/* protect the eg20t_port private structure and io access to membase */
 	spinlock_t lock;
@@ -1343,7 +1345,7 @@ static int pch_uart_startup(struct uart_port *port)
 		return ret;
 
 	ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
-			KBUILD_MODNAME, priv);
+			priv->irq_name, priv);
 	if (ret < 0)
 		return ret;
 
@@ -1588,13 +1590,8 @@ static void pch_uart_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(priv, UART_LSR_THRE);
 	/*
 	 * Send the character out.
-	 * If a LF, also do CR...
 	 */
 	iowrite8(c, priv->membase + PCH_UART_THR);
-	if (c == 10) {
-		wait_for_xmitr(priv, UART_LSR_THRE);
-		iowrite8(13, priv->membase + PCH_UART_THR);
-	}
 
 	/*
 	 * Finally, wait for transmitter to become empty
@@ -1818,6 +1815,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.line = board->line_no;
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
+	snprintf(priv->irq_name, IRQ_NAME_SIZE,
+		 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
+		 priv->port.line);
+
 	spin_lock_init(&priv->port.lock);
 
 	pci_set_drvdata(pdev, priv);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index f9f20f383760..9e7ee39f8b2a 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -711,13 +711,8 @@ static void serial_pxa_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(up);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	serial_out(up, UART_TX, c);
-	if (c == 10) {
-		wait_for_xmitr(up);
-		serial_out(up, UART_TX, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 1f5505e7f90d..329337711bb0 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -53,6 +53,29 @@
 
 #include "samsung.h"
 
+#if	defined(CONFIG_SERIAL_SAMSUNG_DEBUG) &&	\
+	defined(CONFIG_DEBUG_LL) &&		\
+	!defined(MODULE)
+
+extern void printascii(const char *);
+
+__printf(1, 2)
+static void dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vscnprintf(buff, sizeof(buf), fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+#else
+#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
+#endif
+
 /* UART name and device definitions */
 
 #define S3C24XX_SERIAL_NAME	"ttySAC"
@@ -468,8 +491,8 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	int ret;
 
-	dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
-	    port->mapbase, port->membase);
+	dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
+	    port, (unsigned long long)port->mapbase, port->membase);
 
 	rx_enabled(port) = 1;
 
@@ -514,8 +537,8 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	int ret;
 
-	dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n",
-	    port->mapbase, port->membase);
+	dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
+	    port, (unsigned long long)port->mapbase, port->membase);
 
 	wr_regl(port, S3C64XX_UINTM, 0xf);
 
@@ -1160,7 +1183,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		return -EINVAL;
 	}
 
-	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+	dbg("resource %pR)\n", res);
 
 	port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
 	if (!port->membase) {
@@ -1203,7 +1226,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		wr_regl(port, S3C64XX_UINTSP, 0xf);
 	}
 
-	dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+	dbg("port: map=%08x, mem=%p, irq=%d (%d,%d), clock=%u\n",
 	    port->mapbase, port->membase, port->irq,
 	    ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8827e5424cef..eb071dd19b2d 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -1,3 +1,6 @@
+#ifndef __SAMSUNG_H
+#define __SAMSUNG_H
+
 /*
  * Driver for Samsung SoC onboard UARTs.
  *
@@ -77,24 +80,4 @@ struct s3c24xx_uart_port {
 #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
 #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
 
-#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
-    defined(CONFIG_DEBUG_LL) && \
-    !defined(MODULE)
-
-extern void printascii(const char *);
-
-static void dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-#else
-#define dbg(x...) do { } while (0)
 #endif
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
new file mode 100644
index 000000000000..1b6a77c4b2cb
--- /dev/null
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -0,0 +1,1277 @@
+/*
+ * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint
+ * Author: Jon Ringle <jringle@gridpoint.com>
+ *
+ *  Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+
+#define SC16IS7XX_NAME			"sc16is7xx"
+
+/* SC16IS7XX register definitions */
+#define SC16IS7XX_RHR_REG		(0x00) /* RX FIFO */
+#define SC16IS7XX_THR_REG		(0x00) /* TX FIFO */
+#define SC16IS7XX_IER_REG		(0x01) /* Interrupt enable */
+#define SC16IS7XX_IIR_REG		(0x02) /* Interrupt Identification */
+#define SC16IS7XX_FCR_REG		(0x02) /* FIFO control */
+#define SC16IS7XX_LCR_REG		(0x03) /* Line Control */
+#define SC16IS7XX_MCR_REG		(0x04) /* Modem Control */
+#define SC16IS7XX_LSR_REG		(0x05) /* Line Status */
+#define SC16IS7XX_MSR_REG		(0x06) /* Modem Status */
+#define SC16IS7XX_SPR_REG		(0x07) /* Scratch Pad */
+#define SC16IS7XX_TXLVL_REG		(0x08) /* TX FIFO level */
+#define SC16IS7XX_RXLVL_REG		(0x09) /* RX FIFO level */
+#define SC16IS7XX_IODIR_REG		(0x0a) /* I/O Direction
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOSTATE_REG		(0x0b) /* I/O State
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOINTENA_REG		(0x0c) /* I/O Interrupt Enable
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOCONTROL_REG		(0x0e) /* I/O Control
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_EFCR_REG		(0x0f) /* Extra Features Control */
+
+/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */
+#define SC16IS7XX_TCR_REG		(0x06) /* Transmit control */
+#define SC16IS7XX_TLR_REG		(0x07) /* Trigger level */
+
+/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
+#define SC16IS7XX_DLL_REG		(0x00) /* Divisor Latch Low */
+#define SC16IS7XX_DLH_REG		(0x01) /* Divisor Latch High */
+
+/* Enhanced Register set: Only if (LCR == 0xBF) */
+#define SC16IS7XX_EFR_REG		(0x02) /* Enhanced Features */
+#define SC16IS7XX_XON1_REG		(0x04) /* Xon1 word */
+#define SC16IS7XX_XON2_REG		(0x05) /* Xon2 word */
+#define SC16IS7XX_XOFF1_REG		(0x06) /* Xoff1 word */
+#define SC16IS7XX_XOFF2_REG		(0x07) /* Xoff2 word */
+
+/* IER register bits */
+#define SC16IS7XX_IER_RDI_BIT		(1 << 0) /* Enable RX data interrupt */
+#define SC16IS7XX_IER_THRI_BIT		(1 << 1) /* Enable TX holding register
+						  * interrupt */
+#define SC16IS7XX_IER_RLSI_BIT		(1 << 2) /* Enable RX line status
+						  * interrupt */
+#define SC16IS7XX_IER_MSI_BIT		(1 << 3) /* Enable Modem status
+						  * interrupt */
+
+/* IER register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_IER_SLEEP_BIT		(1 << 4) /* Enable Sleep mode */
+#define SC16IS7XX_IER_XOFFI_BIT		(1 << 5) /* Enable Xoff interrupt */
+#define SC16IS7XX_IER_RTSI_BIT		(1 << 6) /* Enable nRTS interrupt */
+#define SC16IS7XX_IER_CTSI_BIT		(1 << 7) /* Enable nCTS interrupt */
+
+/* FCR register bits */
+#define SC16IS7XX_FCR_FIFO_BIT		(1 << 0) /* Enable FIFO */
+#define SC16IS7XX_FCR_RXRESET_BIT	(1 << 1) /* Reset RX FIFO */
+#define SC16IS7XX_FCR_TXRESET_BIT	(1 << 2) /* Reset TX FIFO */
+#define SC16IS7XX_FCR_RXLVLL_BIT	(1 << 6) /* RX Trigger level LSB */
+#define SC16IS7XX_FCR_RXLVLH_BIT	(1 << 7) /* RX Trigger level MSB */
+
+/* FCR register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_FCR_TXLVLL_BIT	(1 << 4) /* TX Trigger level LSB */
+#define SC16IS7XX_FCR_TXLVLH_BIT	(1 << 5) /* TX Trigger level MSB */
+
+/* IIR register bits */
+#define SC16IS7XX_IIR_NO_INT_BIT	(1 << 0) /* No interrupts pending */
+#define SC16IS7XX_IIR_ID_MASK		0x3e     /* Mask for the interrupt ID */
+#define SC16IS7XX_IIR_THRI_SRC		0x02     /* TX holding register empty */
+#define SC16IS7XX_IIR_RDI_SRC		0x04     /* RX data interrupt */
+#define SC16IS7XX_IIR_RLSE_SRC		0x06     /* RX line status error */
+#define SC16IS7XX_IIR_RTOI_SRC		0x0c     /* RX time-out interrupt */
+#define SC16IS7XX_IIR_MSI_SRC		0x00     /* Modem status interrupt
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_IIR_INPIN_SRC		0x30     /* Input pin change of state
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_IIR_XOFFI_SRC		0x10     /* Received Xoff */
+#define SC16IS7XX_IIR_CTSRTS_SRC	0x20     /* nCTS,nRTS change of state
+						  * from active (LOW)
+						  * to inactive (HIGH)
+						  */
+/* LCR register bits */
+#define SC16IS7XX_LCR_LENGTH0_BIT	(1 << 0) /* Word length bit 0 */
+#define SC16IS7XX_LCR_LENGTH1_BIT	(1 << 1) /* Word length bit 1
+						  *
+						  * Word length bits table:
+						  * 00 -> 5 bit words
+						  * 01 -> 6 bit words
+						  * 10 -> 7 bit words
+						  * 11 -> 8 bit words
+						  */
+#define SC16IS7XX_LCR_STOPLEN_BIT	(1 << 2) /* STOP length bit
+						  *
+						  * STOP length bit table:
+						  * 0 -> 1 stop bit
+						  * 1 -> 1-1.5 stop bits if
+						  *      word length is 5,
+						  *      2 stop bits otherwise
+						  */
+#define SC16IS7XX_LCR_PARITY_BIT	(1 << 3) /* Parity bit enable */
+#define SC16IS7XX_LCR_EVENPARITY_BIT	(1 << 4) /* Even parity bit enable */
+#define SC16IS7XX_LCR_FORCEPARITY_BIT	(1 << 5) /* 9-bit multidrop parity */
+#define SC16IS7XX_LCR_TXBREAK_BIT	(1 << 6) /* TX break enable */
+#define SC16IS7XX_LCR_DLAB_BIT		(1 << 7) /* Divisor Latch enable */
+#define SC16IS7XX_LCR_WORD_LEN_5	(0x00)
+#define SC16IS7XX_LCR_WORD_LEN_6	(0x01)
+#define SC16IS7XX_LCR_WORD_LEN_7	(0x02)
+#define SC16IS7XX_LCR_WORD_LEN_8	(0x03)
+#define SC16IS7XX_LCR_CONF_MODE_A	SC16IS7XX_LCR_DLAB_BIT /* Special
+								* reg set */
+#define SC16IS7XX_LCR_CONF_MODE_B	0xBF                   /* Enhanced
+								* reg set */
+
+/* MCR register bits */
+#define SC16IS7XX_MCR_DTR_BIT		(1 << 0) /* DTR complement
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MCR_RTS_BIT		(1 << 1) /* RTS complement */
+#define SC16IS7XX_MCR_TCRTLR_BIT	(1 << 2) /* TCR/TLR register enable */
+#define SC16IS7XX_MCR_LOOP_BIT		(1 << 4) /* Enable loopback test mode */
+#define SC16IS7XX_MCR_XONANY_BIT	(1 << 5) /* Enable Xon Any
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+#define SC16IS7XX_MCR_IRDA_BIT		(1 << 6) /* Enable IrDA mode
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+#define SC16IS7XX_MCR_CLKSEL_BIT	(1 << 7) /* Divide clock by 4
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+
+/* LSR register bits */
+#define SC16IS7XX_LSR_DR_BIT		(1 << 0) /* Receiver data ready */
+#define SC16IS7XX_LSR_OE_BIT		(1 << 1) /* Overrun Error */
+#define SC16IS7XX_LSR_PE_BIT		(1 << 2) /* Parity Error */
+#define SC16IS7XX_LSR_FE_BIT		(1 << 3) /* Frame Error */
+#define SC16IS7XX_LSR_BI_BIT		(1 << 4) /* Break Interrupt */
+#define SC16IS7XX_LSR_BRK_ERROR_MASK	0x1E     /* BI, FE, PE, OE bits */
+#define SC16IS7XX_LSR_THRE_BIT		(1 << 5) /* TX holding register empty */
+#define SC16IS7XX_LSR_TEMT_BIT		(1 << 6) /* Transmitter empty */
+#define SC16IS7XX_LSR_FIFOE_BIT		(1 << 7) /* Fifo Error */
+
+/* MSR register bits */
+#define SC16IS7XX_MSR_DCTS_BIT		(1 << 0) /* Delta CTS Clear To Send */
+#define SC16IS7XX_MSR_DDSR_BIT		(1 << 1) /* Delta DSR Data Set Ready
+						  * or (IO4)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DRI_BIT		(1 << 2) /* Delta RI Ring Indicator
+						  * or (IO7)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DCD_BIT		(1 << 3) /* Delta CD Carrier Detect
+						  * or (IO6)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_CTS_BIT		(1 << 0) /* CTS */
+#define SC16IS7XX_MSR_DSR_BIT		(1 << 1) /* DSR (IO4)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_RI_BIT		(1 << 2) /* RI (IO7)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_CD_BIT		(1 << 3) /* CD (IO6)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DELTA_MASK	0x0F     /* Any of the delta bits! */
+
+/*
+ * TCR register bits
+ * TCR trigger levels are available from 0 to 60 characters with a granularity
+ * of four.
+ * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is
+ * no built-in hardware check to make sure this condition is met. Also, the TCR
+ * must be programmed with this condition before auto RTS or software flow
+ * control is enabled to avoid spurious operation of the device.
+ */
+#define SC16IS7XX_TCR_RX_HALT(words)	((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TCR_RX_RESUME(words)	((((words) / 4) & 0x0f) << 4)
+
+/*
+ * TLR register bits
+ * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
+ * FIFO Control Register (FCR) are used for the transmit and receive FIFO
+ * trigger levels. Trigger levels from 4 characters to 60 characters are
+ * available with a granularity of four.
+ *
+ * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the
+ * trigger level setting defined in FCR. If TLR has non-zero trigger level value
+ * the trigger level defined in FCR is discarded. This applies to both transmit
+ * FIFO and receive FIFO trigger level setting.
+ *
+ * When TLR is used for RX trigger level control, FCR[7:6] should be left at the
+ * default state, that is, '00'.
+ */
+#define SC16IS7XX_TLR_TX_TRIGGER(words)	((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TLR_RX_TRIGGER(words)	((((words) / 4) & 0x0f) << 4)
+
+/* IOControl register bits (Only 750/760) */
+#define SC16IS7XX_IOCONTROL_LATCH_BIT	(1 << 0) /* Enable input latching */
+#define SC16IS7XX_IOCONTROL_GPIO_BIT	(1 << 1) /* Enable GPIO[7:4] */
+#define SC16IS7XX_IOCONTROL_SRESET_BIT	(1 << 3) /* Software Reset */
+
+/* EFCR register bits */
+#define SC16IS7XX_EFCR_9BIT_MODE_BIT	(1 << 0) /* Enable 9-bit or Multidrop
+						  * mode (RS485) */
+#define SC16IS7XX_EFCR_RXDISABLE_BIT	(1 << 1) /* Disable receiver */
+#define SC16IS7XX_EFCR_TXDISABLE_BIT	(1 << 2) /* Disable transmitter */
+#define SC16IS7XX_EFCR_AUTO_RS485_BIT	(1 << 4) /* Auto RS485 RTS direction */
+#define SC16IS7XX_EFCR_RTS_INVERT_BIT	(1 << 5) /* RTS output inversion */
+#define SC16IS7XX_EFCR_IRDA_MODE_BIT	(1 << 7) /* IrDA mode
+						  * 0 = rate upto 115.2 kbit/s
+						  *   - Only 750/760
+						  * 1 = rate upto 1.152 Mbit/s
+						  *   - Only 760
+						  */
+
+/* EFR register bits */
+#define SC16IS7XX_EFR_AUTORTS_BIT	(1 << 6) /* Auto RTS flow ctrl enable */
+#define SC16IS7XX_EFR_AUTOCTS_BIT	(1 << 7) /* Auto CTS flow ctrl enable */
+#define SC16IS7XX_EFR_XOFF2_DETECT_BIT	(1 << 5) /* Enable Xoff2 detection */
+#define SC16IS7XX_EFR_ENABLE_BIT	(1 << 4) /* Enable enhanced functions
+						  * and writing to IER[7:4],
+						  * FCR[5:4], MCR[7:5]
+						  */
+#define SC16IS7XX_EFR_SWFLOW3_BIT	(1 << 3) /* SWFLOW bit 3 */
+#define SC16IS7XX_EFR_SWFLOW2_BIT	(1 << 2) /* SWFLOW bit 2
+						  *
+						  * SWFLOW bits 3 & 2 table:
+						  * 00 -> no transmitter flow
+						  *       control
+						  * 01 -> transmitter generates
+						  *       XON2 and XOFF2
+						  * 10 -> transmitter generates
+						  *       XON1 and XOFF1
+						  * 11 -> transmitter generates
+						  *       XON1, XON2, XOFF1 and
+						  *       XOFF2
+						  */
+#define SC16IS7XX_EFR_SWFLOW1_BIT	(1 << 1) /* SWFLOW bit 2 */
+#define SC16IS7XX_EFR_SWFLOW0_BIT	(1 << 0) /* SWFLOW bit 3
+						  *
+						  * SWFLOW bits 3 & 2 table:
+						  * 00 -> no received flow
+						  *       control
+						  * 01 -> receiver compares
+						  *       XON2 and XOFF2
+						  * 10 -> receiver compares
+						  *       XON1 and XOFF1
+						  * 11 -> receiver compares
+						  *       XON1, XON2, XOFF1 and
+						  *       XOFF2
+						  */
+
+/* Misc definitions */
+#define SC16IS7XX_FIFO_SIZE		(64)
+#define SC16IS7XX_REG_SHIFT		2
+
+struct sc16is7xx_devtype {
+	char	name[10];
+	int	nr_gpio;
+	int	nr_uart;
+};
+
+struct sc16is7xx_one {
+	struct uart_port		port;
+	struct work_struct		tx_work;
+	struct work_struct		md_work;
+
+	struct serial_rs485		rs485;
+};
+
+struct sc16is7xx_port {
+	struct uart_driver		uart;
+	struct sc16is7xx_devtype	*devtype;
+	struct regmap			*regmap;
+	struct mutex			mutex;
+	struct clk			*clk;
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip		gpio;
+#endif
+	unsigned char			buf[SC16IS7XX_FIFO_SIZE];
+	struct sc16is7xx_one		p[0];
+};
+
+#define to_sc16is7xx_one(p,e)	((container_of((p), struct sc16is7xx_one, e)))
+
+static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int val = 0;
+
+	regmap_read(s->regmap,
+		    (reg << SC16IS7XX_REG_SHIFT) | port->line, &val);
+
+	return val;
+}
+
+static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	regmap_write(s->regmap,
+		     (reg << SC16IS7XX_REG_SHIFT) | port->line, val);
+}
+
+static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
+				  u8 mask, u8 val)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	regmap_update_bits(s->regmap,
+			   (reg << SC16IS7XX_REG_SHIFT) | port->line,
+			   mask, val);
+}
+
+
+static void sc16is7xx_power(struct uart_port *port, int on)
+{
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_IER_SLEEP_BIT,
+			      on ? 0 : SC16IS7XX_IER_SLEEP_BIT);
+}
+
+static const struct sc16is7xx_devtype sc16is74x_devtype = {
+	.name		= "SC16IS74X",
+	.nr_gpio	= 0,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is750_devtype = {
+	.name		= "SC16IS750",
+	.nr_gpio	= 8,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is752_devtype = {
+	.name		= "SC16IS752",
+	.nr_gpio	= 8,
+	.nr_uart	= 2,
+};
+
+static const struct sc16is7xx_devtype sc16is760_devtype = {
+	.name		= "SC16IS760",
+	.nr_gpio	= 8,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is762_devtype = {
+	.name		= "SC16IS762",
+	.nr_gpio	= 8,
+	.nr_uart	= 2,
+};
+
+static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg >> SC16IS7XX_REG_SHIFT) {
+	case SC16IS7XX_RHR_REG:
+	case SC16IS7XX_IIR_REG:
+	case SC16IS7XX_LSR_REG:
+	case SC16IS7XX_MSR_REG:
+	case SC16IS7XX_TXLVL_REG:
+	case SC16IS7XX_RXLVL_REG:
+	case SC16IS7XX_IOSTATE_REG:
+		return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
+{
+	switch (reg >> SC16IS7XX_REG_SHIFT) {
+	case SC16IS7XX_RHR_REG:
+		return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static int sc16is7xx_set_baud(struct uart_port *port, int baud)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	u8 lcr;
+	u8 prescaler = 0;
+	unsigned long clk = port->uartclk, div = clk / 16 / baud;
+
+	if (div > 0xffff) {
+		prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
+		div /= 4;
+	}
+
+	lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
+
+	/* Open the LCR divisors for configuration */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	/* Enable enhanced features */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+			     SC16IS7XX_EFR_ENABLE_BIT);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Put LCR back to the normal mode */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_CLKSEL_BIT,
+			      prescaler);
+
+	/* Open the LCR divisors for configuration */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_A);
+
+	/* Write the new divisor */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
+	sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Put LCR back to the normal mode */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	return DIV_ROUND_CLOSEST(clk / 16, div);
+}
+
+static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
+				unsigned int iir)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int lsr = 0, ch, flag, bytes_read, i;
+	bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false;
+
+	if (unlikely(rxlen >= sizeof(s->buf))) {
+		dev_warn_ratelimited(port->dev,
+				     "Port %i: Possible RX FIFO overrun: %d\n",
+				     port->line, rxlen);
+		port->icount.buf_overrun++;
+		/* Ensure sanity of RX level */
+		rxlen = sizeof(s->buf);
+	}
+
+	while (rxlen) {
+		/* Only read lsr if there are possible errors in FIFO */
+		if (read_lsr) {
+			lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+			if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT))
+				read_lsr = false; /* No errors left in FIFO */
+		} else
+			lsr = 0;
+
+		if (read_lsr) {
+			s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
+			bytes_read = 1;
+		} else {
+			regcache_cache_bypass(s->regmap, true);
+			regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG,
+					s->buf, rxlen);
+			regcache_cache_bypass(s->regmap, false);
+			bytes_read = rxlen;
+		}
+
+		lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+		port->icount.rx++;
+		flag = TTY_NORMAL;
+
+		if (unlikely(lsr)) {
+			if (lsr & SC16IS7XX_LSR_BI_BIT) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (lsr & SC16IS7XX_LSR_PE_BIT)
+				port->icount.parity++;
+			else if (lsr & SC16IS7XX_LSR_FE_BIT)
+				port->icount.frame++;
+			else if (lsr & SC16IS7XX_LSR_OE_BIT)
+				port->icount.overrun++;
+
+			lsr &= port->read_status_mask;
+			if (lsr & SC16IS7XX_LSR_BI_BIT)
+				flag = TTY_BREAK;
+			else if (lsr & SC16IS7XX_LSR_PE_BIT)
+				flag = TTY_PARITY;
+			else if (lsr & SC16IS7XX_LSR_FE_BIT)
+				flag = TTY_FRAME;
+			else if (lsr & SC16IS7XX_LSR_OE_BIT)
+				flag = TTY_OVERRUN;
+		}
+
+		for (i = 0; i < bytes_read; ++i) {
+			ch = s->buf[i];
+			if (uart_handle_sysrq_char(port, ch))
+				continue;
+
+			if (lsr & port->ignore_status_mask)
+				continue;
+
+			uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch,
+					 flag);
+		}
+		rxlen -= bytes_read;
+	}
+
+	tty_flip_buffer_push(&port->state->port);
+}
+
+static void sc16is7xx_handle_tx(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int txlen, to_send, i;
+
+	if (unlikely(port->x_char)) {
+		sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		return;
+
+	/* Get length of data pending in circular buffer */
+	to_send = uart_circ_chars_pending(xmit);
+	if (likely(to_send)) {
+		/* Limit to size of TX FIFO */
+		txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+		to_send = (to_send > txlen) ? txlen : to_send;
+
+		/* Add data to send */
+		port->icount.tx += to_send;
+
+		/* Convert to linear buffer */
+		for (i = 0; i < to_send; ++i) {
+			s->buf[i] = xmit->buf[xmit->tail];
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		}
+		regcache_cache_bypass(s->regmap, true);
+		regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send);
+		regcache_cache_bypass(s->regmap, false);
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
+{
+	struct uart_port *port = &s->p[portno].port;
+
+	do {
+		unsigned int iir, msr, rxlen;
+
+		iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
+		if (iir & SC16IS7XX_IIR_NO_INT_BIT)
+			break;
+
+		iir &= SC16IS7XX_IIR_ID_MASK;
+
+		switch (iir) {
+		case SC16IS7XX_IIR_RDI_SRC:
+		case SC16IS7XX_IIR_RLSE_SRC:
+		case SC16IS7XX_IIR_RTOI_SRC:
+		case SC16IS7XX_IIR_XOFFI_SRC:
+			rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+			if (rxlen)
+				sc16is7xx_handle_rx(port, rxlen, iir);
+			break;
+
+		case SC16IS7XX_IIR_CTSRTS_SRC:
+			msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG);
+			uart_handle_cts_change(port,
+					       !!(msr & SC16IS7XX_MSR_CTS_BIT));
+			break;
+		case SC16IS7XX_IIR_THRI_SRC:
+			mutex_lock(&s->mutex);
+			sc16is7xx_handle_tx(port);
+			mutex_unlock(&s->mutex);
+			break;
+		default:
+			dev_err_ratelimited(port->dev,
+					    "Port %i: Unexpected interrupt: %x",
+					    port->line, iir);
+			break;
+		}
+	} while (1);
+}
+
+static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+{
+	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+	int i;
+
+	for (i = 0; i < s->uart.nr; ++i)
+		sc16is7xx_port_irq(s, i);
+
+	return IRQ_HANDLED;
+}
+
+static void sc16is7xx_wq_proc(struct work_struct *ws)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
+	struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
+
+	mutex_lock(&s->mutex);
+	sc16is7xx_handle_tx(&one->port);
+	mutex_unlock(&s->mutex);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port* port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+	struct circ_buf *xmit = &one->port.state->xmit;
+
+	/* handle rs485 */
+	if (one->rs485.flags & SER_RS485_ENABLED) {
+		/* do nothing if current tx not yet completed */
+		int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+		if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
+			return;
+
+		if (uart_circ_empty(xmit) &&
+		    (one->rs485.delay_rts_after_send > 0))
+			mdelay(one->rs485.delay_rts_after_send);
+	}
+
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_IER_THRI_BIT,
+			      0);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port* port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT;
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_LSR_DR_BIT,
+			      0);
+}
+
+static void sc16is7xx_start_tx(struct uart_port *port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	/* handle rs485 */
+	if ((one->rs485.flags & SER_RS485_ENABLED) &&
+	    (one->rs485.delay_rts_before_send > 0)) {
+		mdelay(one->rs485.delay_rts_before_send);
+	}
+
+	if (!work_pending(&one->tx_work))
+		schedule_work(&one->tx_work);
+}
+
+static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
+{
+	unsigned int lvl, lsr;
+
+	lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+	lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+
+	return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
+{
+	/* DCD and DSR are not wired and CTS/RTS is handled automatically
+	 * so just indicate DSR and CAR asserted
+	 */
+	return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sc16is7xx_md_proc(struct work_struct *ws)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work);
+
+	sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_LOOP_BIT,
+			      (one->port.mctrl & TIOCM_LOOP) ?
+				      SC16IS7XX_MCR_LOOP_BIT : 0);
+}
+
+static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	schedule_work(&one->md_work);
+}
+
+static void sc16is7xx_break_ctl(struct uart_port *port, int break_state)
+{
+	sc16is7xx_port_update(port, SC16IS7XX_LCR_REG,
+			      SC16IS7XX_LCR_TXBREAK_BIT,
+			      break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0);
+}
+
+static void sc16is7xx_set_termios(struct uart_port *port,
+				  struct ktermios *termios,
+				  struct ktermios *old)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int lcr, flow = 0;
+	int baud;
+
+	/* Mask termios capabilities we don't support */
+	termios->c_cflag &= ~CMSPAR;
+
+	/* Word size */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr = SC16IS7XX_LCR_WORD_LEN_5;
+		break;
+	case CS6:
+		lcr = SC16IS7XX_LCR_WORD_LEN_6;
+		break;
+	case CS7:
+		lcr = SC16IS7XX_LCR_WORD_LEN_7;
+		break;
+	case CS8:
+		lcr = SC16IS7XX_LCR_WORD_LEN_8;
+		break;
+	default:
+		lcr = SC16IS7XX_LCR_WORD_LEN_8;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+		break;
+	}
+
+	/* Parity */
+	if (termios->c_cflag & PARENB) {
+		lcr |= SC16IS7XX_LCR_PARITY_BIT;
+		if (!(termios->c_cflag & PARODD))
+			lcr |= SC16IS7XX_LCR_EVENPARITY_BIT;
+	}
+
+	/* Stop bits */
+	if (termios->c_cflag & CSTOPB)
+		lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */
+
+	/* Set read status mask */
+	port->read_status_mask = SC16IS7XX_LSR_OE_BIT;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= SC16IS7XX_LSR_PE_BIT |
+					  SC16IS7XX_LSR_FE_BIT;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= SC16IS7XX_LSR_BI_BIT;
+
+	/* Set status ignore mask */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNBRK)
+		port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT;
+	if (!(termios->c_cflag & CREAD))
+		port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	/* Configure flow control */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]);
+	sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]);
+	if (termios->c_cflag & CRTSCTS)
+		flow |= SC16IS7XX_EFR_AUTOCTS_BIT |
+			SC16IS7XX_EFR_AUTORTS_BIT;
+	if (termios->c_iflag & IXON)
+		flow |= SC16IS7XX_EFR_SWFLOW3_BIT;
+	if (termios->c_iflag & IXOFF)
+		flow |= SC16IS7XX_EFR_SWFLOW1_BIT;
+
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Update LCR register */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	/* Get baud rate generator configuration */
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 4 / 0xffff,
+				  port->uartclk / 16);
+
+	/* Setup baudrate generator */
+	baud = sc16is7xx_set_baud(port, baud);
+
+	/* Update timeout according to new baud rate */
+	uart_update_timeout(port, termios->c_cflag, baud);
+}
+
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+static void sc16is7xx_config_rs485(struct uart_port *port,
+				   struct serial_rs485 *rs485)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	one->rs485 = *rs485;
+
+	if (one->rs485.flags & SER_RS485_ENABLED) {
+		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT);
+	} else {
+		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
+				      0);
+	}
+}
+#endif
+
+static int sc16is7xx_ioctl(struct uart_port *port, unsigned int cmd,
+			   unsigned long arg)
+{
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+	struct serial_rs485 rs485;
+
+	switch (cmd) {
+	case TIOCSRS485:
+		if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
+			return -EFAULT;
+
+		sc16is7xx_config_rs485(port, &rs485);
+		return 0;
+	case TIOCGRS485:
+		if (copy_to_user((void __user *)arg,
+				 &(to_sc16is7xx_one(port, port)->rs485),
+				 sizeof(rs485)))
+			return -EFAULT;
+		return 0;
+	default:
+		break;
+	}
+#endif
+
+	return -ENOIOCTLCMD;
+}
+
+static int sc16is7xx_startup(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int val;
+
+	sc16is7xx_power(port, 1);
+
+	/* Reset FIFOs*/
+	val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT;
+	sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val);
+	udelay(5);
+	sc16is7xx_port_write(port, SC16IS7XX_FCR_REG,
+			     SC16IS7XX_FCR_FIFO_BIT);
+
+	/* Enable EFR */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	regcache_cache_bypass(s->regmap, true);
+
+	/* Enable write access to enhanced features and internal clock div */
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+			     SC16IS7XX_EFR_ENABLE_BIT);
+
+	/* Enable TCR/TLR */
+	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_TCRTLR_BIT,
+			      SC16IS7XX_MCR_TCRTLR_BIT);
+
+	/* Configure flow control levels */
+	/* Flow control halt level 48, resume level 24 */
+	sc16is7xx_port_write(port, SC16IS7XX_TCR_REG,
+			     SC16IS7XX_TCR_RX_RESUME(24) |
+			     SC16IS7XX_TCR_RX_HALT(48));
+
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Now, initialize the UART */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
+
+	/* Enable the Rx and Tx FIFO */
+	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+			      SC16IS7XX_EFCR_RXDISABLE_BIT |
+			      SC16IS7XX_EFCR_TXDISABLE_BIT,
+			      0);
+
+	/* Enable RX, TX, CTS change interrupts */
+	val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT |
+	      SC16IS7XX_IER_CTSI_BIT;
+	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val);
+
+	return 0;
+}
+
+static void sc16is7xx_shutdown(struct uart_port *port)
+{
+	/* Disable all interrupts */
+	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
+	/* Disable TX/RX */
+	sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG,
+			     SC16IS7XX_EFCR_RXDISABLE_BIT |
+			     SC16IS7XX_EFCR_TXDISABLE_BIT);
+
+	sc16is7xx_power(port, 0);
+}
+
+static const char *sc16is7xx_type(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL;
+}
+
+static int sc16is7xx_request_port(struct uart_port *port)
+{
+	/* Do nothing */
+	return 0;
+}
+
+static void sc16is7xx_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_SC16IS7XX;
+}
+
+static int sc16is7xx_verify_port(struct uart_port *port,
+				 struct serial_struct *s)
+{
+	if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX))
+		return -EINVAL;
+	if (s->irq != port->irq)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void sc16is7xx_pm(struct uart_port *port, unsigned int state,
+			 unsigned int oldstate)
+{
+	sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0);
+}
+
+static void sc16is7xx_null_void(struct uart_port *port)
+{
+	/* Do nothing */
+}
+
+static const struct uart_ops sc16is7xx_ops = {
+	.tx_empty	= sc16is7xx_tx_empty,
+	.set_mctrl	= sc16is7xx_set_mctrl,
+	.get_mctrl	= sc16is7xx_get_mctrl,
+	.stop_tx	= sc16is7xx_stop_tx,
+	.start_tx	= sc16is7xx_start_tx,
+	.stop_rx	= sc16is7xx_stop_rx,
+	.enable_ms	= sc16is7xx_null_void,
+	.break_ctl	= sc16is7xx_break_ctl,
+	.startup	= sc16is7xx_startup,
+	.shutdown	= sc16is7xx_shutdown,
+	.set_termios	= sc16is7xx_set_termios,
+	.type		= sc16is7xx_type,
+	.request_port	= sc16is7xx_request_port,
+	.release_port	= sc16is7xx_null_void,
+	.config_port	= sc16is7xx_config_port,
+	.verify_port	= sc16is7xx_verify_port,
+	.ioctl		= sc16is7xx_ioctl,
+	.pm		= sc16is7xx_pm,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned int val;
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
+
+	return !!(val & BIT(offset));
+}
+
+static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+			      val ? BIT(offset) : 0);
+}
+
+static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip,
+					  unsigned offset)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0);
+
+	return 0;
+}
+
+static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
+					   unsigned offset, int val)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+			      val ? BIT(offset) : 0);
+	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
+			      BIT(offset));
+
+	return 0;
+}
+#endif
+
+static int sc16is7xx_probe(struct device *dev,
+			   struct sc16is7xx_devtype *devtype,
+			   struct regmap *regmap, int irq, unsigned long flags)
+{
+	unsigned long freq, *pfreq = dev_get_platdata(dev);
+	struct clk *clk;
+	int i, ret;
+	struct sc16is7xx_port *s;
+
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* Alloc port structure */
+	s = devm_kzalloc(dev, sizeof(*s) +
+			 sizeof(struct sc16is7xx_one) * devtype->nr_uart,
+			 GFP_KERNEL);
+	if (!s) {
+		dev_err(dev, "Error allocating port structure\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		if (pfreq)
+			freq = *pfreq;
+		else
+			return PTR_ERR(clk);
+	} else {
+		freq = clk_get_rate(clk);
+	}
+
+	s->regmap = regmap;
+	s->devtype = devtype;
+	dev_set_drvdata(dev, s);
+
+	/* Register UART driver */
+	s->uart.owner		= THIS_MODULE;
+	s->uart.dev_name	= "ttySC";
+	s->uart.nr		= devtype->nr_uart;
+	ret = uart_register_driver(&s->uart);
+	if (ret) {
+		dev_err(dev, "Registering UART driver failed\n");
+		goto out_clk;
+	}
+
+#ifdef CONFIG_GPIOLIB
+	if (devtype->nr_gpio) {
+		/* Setup GPIO cotroller */
+		s->gpio.owner		 = THIS_MODULE;
+		s->gpio.dev		 = dev;
+		s->gpio.label		 = dev_name(dev);
+		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
+		s->gpio.get		 = sc16is7xx_gpio_get;
+		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+		s->gpio.set		 = sc16is7xx_gpio_set;
+		s->gpio.base		 = -1;
+		s->gpio.ngpio		 = devtype->nr_gpio;
+		s->gpio.can_sleep	 = 1;
+		ret = gpiochip_add(&s->gpio);
+		if (ret)
+			goto out_uart;
+	}
+#endif
+
+	mutex_init(&s->mutex);
+
+	for (i = 0; i < devtype->nr_uart; ++i) {
+		/* Initialize port data */
+		s->p[i].port.line	= i;
+		s->p[i].port.dev	= dev;
+		s->p[i].port.irq	= irq;
+		s->p[i].port.type	= PORT_SC16IS7XX;
+		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
+		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
+		s->p[i].port.iotype	= UPIO_PORT;
+		s->p[i].port.uartclk	= freq;
+		s->p[i].port.ops	= &sc16is7xx_ops;
+		/* Disable all interrupts */
+		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
+		/* Disable TX/RX */
+		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG,
+				     SC16IS7XX_EFCR_RXDISABLE_BIT |
+				     SC16IS7XX_EFCR_TXDISABLE_BIT);
+		/* Initialize queue for start TX */
+		INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
+		/* Initialize queue for changing mode */
+		INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
+		/* Register port */
+		uart_add_one_port(&s->uart, &s->p[i].port);
+		/* Go to suspend mode */
+		sc16is7xx_power(&s->p[i].port, 0);
+	}
+
+	/* Setup interrupt */
+	ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
+					IRQF_ONESHOT | flags, dev_name(dev), s);
+	if (!ret)
+		return 0;
+
+	mutex_destroy(&s->mutex);
+
+#ifdef CONFIG_GPIOLIB
+	if (devtype->nr_gpio)
+		WARN_ON(gpiochip_remove(&s->gpio));
+
+out_uart:
+#endif
+	uart_unregister_driver(&s->uart);
+
+out_clk:
+	if (!IS_ERR(s->clk))
+		clk_disable_unprepare(s->clk);
+
+	return ret;
+}
+
+static int sc16is7xx_remove(struct device *dev)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(dev);
+	int i, ret = 0;
+
+#ifdef CONFIG_GPIOLIB
+	if (s->devtype->nr_gpio) {
+		ret = gpiochip_remove(&s->gpio);
+		if (ret)
+			return ret;
+	}
+#endif
+
+	for (i = 0; i < s->uart.nr; i++) {
+		cancel_work_sync(&s->p[i].tx_work);
+		cancel_work_sync(&s->p[i].md_work);
+		uart_remove_one_port(&s->uart, &s->p[i].port);
+		sc16is7xx_power(&s->p[i].port, 0);
+	}
+
+	mutex_destroy(&s->mutex);
+	uart_unregister_driver(&s->uart);
+	if (!IS_ERR(s->clk))
+		clk_disable_unprepare(s->clk);
+
+	return ret;
+}
+
+static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
+	{ .compatible = "nxp,sc16is740",	.data = &sc16is74x_devtype, },
+	{ .compatible = "nxp,sc16is741",	.data = &sc16is74x_devtype, },
+	{ .compatible = "nxp,sc16is750",	.data = &sc16is750_devtype, },
+	{ .compatible = "nxp,sc16is752",	.data = &sc16is752_devtype, },
+	{ .compatible = "nxp,sc16is760",	.data = &sc16is760_devtype, },
+	{ .compatible = "nxp,sc16is762",	.data = &sc16is762_devtype, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids);
+
+static struct regmap_config regcfg = {
+	.reg_bits = 7,
+	.pad_bits = 1,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = sc16is7xx_regmap_volatile,
+	.precious_reg = sc16is7xx_regmap_precious,
+};
+
+static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
+			       const struct i2c_device_id *id)
+{
+	struct sc16is7xx_devtype *devtype;
+	unsigned long flags = 0;
+	struct regmap *regmap;
+
+	if (i2c->dev.of_node) {
+		const struct of_device_id *of_id =
+				of_match_device(sc16is7xx_dt_ids, &i2c->dev);
+
+		devtype = (struct sc16is7xx_devtype *)of_id->data;
+	} else {
+		devtype = (struct sc16is7xx_devtype *)id->driver_data;
+		flags = IRQF_TRIGGER_FALLING;
+	}
+
+	regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
+			      (devtype->nr_uart - 1);
+	regmap = devm_regmap_init_i2c(i2c, &regcfg);
+
+	return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags);
+}
+
+static int sc16is7xx_i2c_remove(struct i2c_client *client)
+{
+	return sc16is7xx_remove(&client->dev);
+}
+
+static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
+	{ "sc16is74x",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is750",	(kernel_ulong_t)&sc16is750_devtype, },
+	{ "sc16is752",	(kernel_ulong_t)&sc16is752_devtype, },
+	{ "sc16is760",	(kernel_ulong_t)&sc16is760_devtype, },
+	{ "sc16is762",	(kernel_ulong_t)&sc16is762_devtype, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
+
+static struct i2c_driver sc16is7xx_i2c_uart_driver = {
+	.driver = {
+		.name		= SC16IS7XX_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(sc16is7xx_dt_ids),
+	},
+	.probe		= sc16is7xx_i2c_probe,
+	.remove		= sc16is7xx_i2c_remove,
+	.id_table	= sc16is7xx_i2c_id_table,
+};
+module_i2c_driver(sc16is7xx_i2c_uart_driver);
+MODULE_ALIAS("i2c:sc16is7xx");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
+MODULE_DESCRIPTION("SC16IS7XX serial driver");
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index a447f71538ef..5443b46345ed 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -474,9 +474,7 @@ static void sccnxp_timer(unsigned long data)
 	sccnxp_handle_events(s);
 	spin_unlock_irqrestore(&s->lock, flags);
 
-	if (!timer_pending(&s->timer))
-		mod_timer(&s->timer, jiffies +
-			  usecs_to_jiffies(s->pdata.poll_time_us));
+	mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us));
 }
 
 static irqreturn_t sccnxp_ist(int irq, void *dev_id)
@@ -674,6 +672,8 @@ static void sccnxp_set_termios(struct uart_port *port,
 	port->ignore_status_mask = 0;
 	if (termios->c_iflag & IGNBRK)
 		port->ignore_status_mask |= SR_BRK;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= SR_PE;
 	if (!(termios->c_cflag & CREAD))
 		port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b68550d95a40..fbf6c5ad222f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -174,8 +174,12 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 			if (tty->termios.c_cflag & CBAUD)
 				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
-
-		if (tty_port_cts_enabled(port)) {
+		/*
+		 * if hw support flow control without software intervention,
+		 * then skip the below check
+		 */
+		if (tty_port_cts_enabled(port) &&
+		    !(uport->flags & UPF_HARD_FLOW)) {
 			spin_lock_irq(&uport->lock);
 			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
 				tty->hw_stopped = 1;
@@ -2239,6 +2243,9 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
 		return;
 
 	port = state->uart_port;
+
+	if (ch == '\n')
+		port->ops->poll_put_char(port, '\r');
 	port->ops->poll_put_char(port, ch);
 }
 #endif
@@ -2772,7 +2779,9 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 
 	uport->icount.cts++;
 
-	if (tty_port_cts_enabled(port)) {
+	/* skip below code if the hw flow control is supported */
+	if (tty_port_cts_enabled(port) &&
+	    !(uport->flags & UPF_HARD_FLOW)) {
 		if (tty->hw_stopped) {
 			if (status) {
 				tty->hw_stopped = 0;
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
new file mode 100644
index 000000000000..bf9560ffe3f4
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -0,0 +1,143 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <uapi/asm-generic/termios.h>
+
+#include "serial_mctrl_gpio.h"
+
+struct mctrl_gpios {
+	struct gpio_desc *gpio[UART_GPIO_MAX];
+};
+
+static const struct {
+	const char *name;
+	unsigned int mctrl;
+	bool dir_out;
+} mctrl_gpios_desc[UART_GPIO_MAX] = {
+	{ "cts", TIOCM_CTS, false, },
+	{ "dsr", TIOCM_DSR, false, },
+	{ "dcd", TIOCM_CD, false, },
+	{ "rng", TIOCM_RNG, false, },
+	{ "rts", TIOCM_RTS, true, },
+	{ "dtr", TIOCM_DTR, true, },
+	{ "out1", TIOCM_OUT1, true, },
+	{ "out2", TIOCM_OUT2, true, },
+};
+
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+	enum mctrl_gpio_idx i;
+
+	if (IS_ERR_OR_NULL(gpios))
+		return;
+
+	for (i = 0; i < UART_GPIO_MAX; i++)
+		if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+		    mctrl_gpios_desc[i].dir_out)
+			gpiod_set_value(gpios->gpio[i],
+					!!(mctrl & mctrl_gpios_desc[i].mctrl));
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_set);
+
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+				      enum mctrl_gpio_idx gidx)
+{
+	if (!IS_ERR_OR_NULL(gpios) && !IS_ERR_OR_NULL(gpios->gpio[gidx]))
+		return gpios->gpio[gidx];
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
+
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+	enum mctrl_gpio_idx i;
+
+	/*
+	 * return it unchanged if the structure is not allocated
+	 */
+	if (IS_ERR_OR_NULL(gpios))
+		return *mctrl;
+
+	for (i = 0; i < UART_GPIO_MAX; i++) {
+		if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+		    !mctrl_gpios_desc[i].dir_out) {
+			if (gpiod_get_value(gpios->gpio[i]))
+				*mctrl |= mctrl_gpios_desc[i].mctrl;
+			else
+				*mctrl &= ~mctrl_gpios_desc[i].mctrl;
+		}
+	}
+
+	return *mctrl;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_get);
+
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+	struct mctrl_gpios *gpios;
+	enum mctrl_gpio_idx i;
+	int err;
+
+	gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
+	if (!gpios)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < UART_GPIO_MAX; i++) {
+		gpios->gpio[i] = devm_gpiod_get_index(dev,
+						      mctrl_gpios_desc[i].name,
+						      idx);
+
+		/*
+		 * The GPIOs are maybe not all filled,
+		 * this is not an error.
+		 */
+		if (IS_ERR_OR_NULL(gpios->gpio[i]))
+			continue;
+
+		if (mctrl_gpios_desc[i].dir_out)
+			err = gpiod_direction_output(gpios->gpio[i], 0);
+		else
+			err = gpiod_direction_input(gpios->gpio[i]);
+		if (err) {
+			dev_dbg(dev, "Unable to set direction for %s GPIO",
+				mctrl_gpios_desc[i].name);
+			devm_gpiod_put(dev, gpios->gpio[i]);
+			gpios->gpio[i] = NULL;
+		}
+	}
+
+	return gpios;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_init);
+
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+	enum mctrl_gpio_idx i;
+
+	if (IS_ERR_OR_NULL(gpios))
+		return;
+
+	for (i = 0; i < UART_GPIO_MAX; i++)
+		if (!IS_ERR_OR_NULL(gpios->gpio[i]))
+			devm_gpiod_put(dev, gpios->gpio[i]);
+	devm_kfree(dev, gpios);
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_free);
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
new file mode 100644
index 000000000000..400ba0494a17
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SERIAL_MCTRL_GPIO__
+#define __SERIAL_MCTRL_GPIO__
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+
+enum mctrl_gpio_idx {
+	UART_GPIO_CTS,
+	UART_GPIO_DSR,
+	UART_GPIO_DCD,
+	UART_GPIO_RNG,
+	UART_GPIO_RI = UART_GPIO_RNG,
+	UART_GPIO_RTS,
+	UART_GPIO_DTR,
+	UART_GPIO_OUT1,
+	UART_GPIO_OUT2,
+	UART_GPIO_MAX,
+};
+
+/*
+ * Opaque descriptor for modem lines controlled by GPIOs
+ */
+struct mctrl_gpios;
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Set state of the modem control output lines via GPIOs.
+ */
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl);
+
+/*
+ * Get state of the modem control output lines from GPIOs.
+ * The mctrl flags are updated and returned.
+ */
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl);
+
+/*
+ * Returns the associated struct gpio_desc to the modem line gidx
+ */
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+				      enum mctrl_gpio_idx gidx);
+
+/*
+ * Request and set direction of modem control lines GPIOs.
+ * devm_* functions are used, so there's no need to call mctrl_gpio_free().
+ * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
+ * allocation error.
+ */
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
+
+/*
+ * Free the mctrl_gpios structure.
+ * Normally, this function will not be called, as the GPIOs will
+ * be disposed of by the resource management code.
+ */
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios);
+
+#else /* GPIOLIB */
+
+static inline
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+}
+
+static inline
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+	return *mctrl;
+}
+
+static inline
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+				      enum mctrl_gpio_idx gidx)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+}
+
+#endif /* GPIOLIB */
+
+#endif
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 90a080b1f9ee..60f49b9d7e39 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -535,13 +535,8 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
 	wait_for_xmitr(up);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	sio_out(up, TXX9_SITFIFO, c);
-	if (c == 10) {
-		wait_for_xmitr(up);
-		sio_out(up, TXX9_SITFIFO, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 68b0fd4b9a6a..1f2be48c92ce 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -358,9 +358,11 @@ static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id)
 {
 	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
 	struct uart_port *port = &sirfport->port;
+	spin_lock(&port->lock);
 	if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled)
 		uart_handle_cts_change(port,
 				!gpio_get_value(sirfport->cts_gpio));
+	spin_unlock(&port->lock);
 	return IRQ_HANDLED;
 }
 
@@ -428,10 +430,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
 	sirfport->rx_io_count += rx_count;
 	port->icount.rx += rx_count;
 
-	spin_unlock(&port->lock);
-	tty_flip_buffer_push(&port->state->port);
-	spin_lock(&port->lock);
-
 	return rx_count;
 }
 
@@ -465,6 +463,7 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
 	struct circ_buf *xmit = &port->state->xmit;
 	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	xmit->tail = (xmit->tail + sirfport->transfer_size) &
 				(UART_XMIT_SIZE - 1);
 	port->icount.tx += sirfport->transfer_size;
@@ -473,10 +472,9 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
 	if (sirfport->tx_dma_addr)
 		dma_unmap_single(port->dev, sirfport->tx_dma_addr,
 				sirfport->transfer_size, DMA_TO_DEVICE);
-	spin_lock_irqsave(&sirfport->tx_lock, flags);
 	sirfport->tx_dma_state = TX_DMA_IDLE;
 	sirfsoc_uart_tx_with_dma(sirfport);
-	spin_unlock_irqrestore(&sirfport->tx_lock, flags);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void sirfsoc_uart_insert_rx_buf_to_tty(
@@ -489,7 +487,6 @@ static void sirfsoc_uart_insert_rx_buf_to_tty(
 	inserted = tty_insert_flip_string(tport,
 		sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count);
 	port->icount.rx += inserted;
-	tty_flip_buffer_push(tport);
 }
 
 static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index)
@@ -525,7 +522,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 	unsigned long flags;
 	struct dma_tx_state tx_state;
 
-	spin_lock_irqsave(&sirfport->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
 		sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
@@ -541,12 +538,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
 			SIRFUART_IO_MODE);
-	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
-	spin_lock(&port->lock);
 	sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
-	spin_unlock(&port->lock);
 	if (sirfport->rx_io_count == 4) {
-		spin_lock_irqsave(&sirfport->rx_lock, flags);
 		sirfport->rx_io_count = 0;
 		wr_regl(port, ureg->sirfsoc_int_st_reg,
 				uint_st->sirfsoc_rx_done);
@@ -557,11 +550,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 		else
 			wr_regl(port, SIRFUART_INT_EN_CLR,
 					uint_en->sirfsoc_rx_done_en);
-		spin_unlock_irqrestore(&sirfport->rx_lock, flags);
-
 		sirfsoc_uart_start_next_rx_dma(port);
 	} else {
-		spin_lock_irqsave(&sirfport->rx_lock, flags);
 		wr_regl(port, ureg->sirfsoc_int_st_reg,
 				uint_st->sirfsoc_rx_done);
 		if (!sirfport->is_marco)
@@ -571,8 +561,9 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 		else
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 					uint_en->sirfsoc_rx_done_en);
-		spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 	}
+	spin_unlock_irqrestore(&port->lock, flags);
+	tty_flip_buffer_push(&port->state->port);
 }
 
 static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
@@ -581,8 +572,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 	struct dma_tx_state tx_state;
-	spin_lock(&sirfport->rx_lock);
-
 	dmaengine_tx_status(sirfport->rx_dma_chan,
 		sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state);
 	dmaengine_terminate_all(sirfport->rx_dma_chan);
@@ -595,7 +584,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
 	else
 		wr_regl(port, SIRFUART_INT_EN_CLR,
 				uint_en->sirfsoc_rx_timeout_en);
-	spin_unlock(&sirfport->rx_lock);
 	tasklet_schedule(&sirfport->rx_tmo_process_tasklet);
 }
 
@@ -659,7 +647,6 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
 		intr_status &= port->read_status_mask;
 		uart_insert_char(port, intr_status,
 					uint_en->sirfsoc_rx_oflow_en, 0, flag);
-		tty_flip_buffer_push(&state->port);
 	}
 recv_char:
 	if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) &&
@@ -684,6 +671,9 @@ recv_char:
 			sirfsoc_uart_pio_rx_chars(port,
 					SIRFSOC_UART_IO_RX_MAX_CNT);
 	}
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(&state->port);
+	spin_lock(&port->lock);
 	if (intr_status & uint_st->sirfsoc_txfifo_empty) {
 		if (sirfport->tx_dma_chan)
 			sirfsoc_uart_tx_with_dma(sirfport);
@@ -702,6 +692,7 @@ recv_char:
 		}
 	}
 	spin_unlock(&port->lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -713,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 	unsigned long flags;
 	struct dma_tx_state tx_state;
-	spin_lock_irqsave(&sirfport->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
 			sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
@@ -726,17 +717,20 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
 			sirfport->rx_completed++;
 		sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
 	}
-	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
+	spin_unlock_irqrestore(&port->lock, flags);
+	tty_flip_buffer_push(&port->state->port);
 }
 
 static void sirfsoc_uart_rx_dma_complete_callback(void *param)
 {
 	struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
-	spin_lock(&sirfport->rx_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sirfport->port.lock, flags);
 	sirfport->rx_issued++;
 	sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT;
-	spin_unlock(&sirfport->rx_lock);
 	tasklet_schedule(&sirfport->rx_dma_complete_tasklet);
+	spin_unlock_irqrestore(&sirfport->port.lock, flags);
 }
 
 /* submit rx dma task into dmaengine */
@@ -745,18 +739,14 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	unsigned long flags;
 	int i;
-	spin_lock_irqsave(&sirfport->rx_lock, flags);
 	sirfport->rx_io_count = 0;
 	wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 		rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
 		~SIRFUART_IO_MODE);
-	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
 		sirfsoc_rx_submit_one_dma_desc(port, i);
 	sirfport->rx_completed = sirfport->rx_issued = 0;
-	spin_lock_irqsave(&sirfport->rx_lock, flags);
 	if (!sirfport->is_marco)
 		wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) |
@@ -764,7 +754,6 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
 	else
 		wr_regl(port, ureg->sirfsoc_int_en_reg,
 			SIRFUART_RX_DMA_INT_EN(port, uint_en));
-	spin_unlock_irqrestore(&sirfport->rx_lock, flags);
 }
 
 static void sirfsoc_uart_start_rx(struct uart_port *port)
@@ -1228,7 +1217,7 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
 	while (rd_regl(port,
 		ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line))
 		cpu_relax();
-	wr_regb(port, ureg->sirfsoc_tx_fifo_data, ch);
+	wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
 }
 
 static void sirfsoc_uart_console_write(struct console *co, const char *s,
@@ -1369,8 +1358,6 @@ usp_no_flow_control:
 		ret = -EFAULT;
 		goto err;
 	}
-	spin_lock_init(&sirfport->rx_lock);
-	spin_lock_init(&sirfport->tx_lock);
 	tasklet_init(&sirfport->rx_dma_complete_tasklet,
 			sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport);
 	tasklet_init(&sirfport->rx_tmo_process_tasklet,
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 8a6eddad2f3c..69a62ebd3afc 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -424,8 +424,6 @@ struct sirfsoc_uart_port {
 	struct dma_chan			*tx_dma_chan;
 	dma_addr_t			tx_dma_addr;
 	struct dma_async_tx_descriptor	*tx_dma_desc;
-	spinlock_t			rx_lock;
-	spinlock_t			tx_lock;
 	struct tasklet_struct		rx_dma_complete_tasklet;
 	struct tasklet_struct		rx_tmo_process_tasklet;
 	unsigned int			rx_io_count;
@@ -441,9 +439,7 @@ struct sirfsoc_uart_port {
 
 /* Register Access Control */
 #define portaddr(port, reg)		((port)->membase + (reg))
-#define rd_regb(port, reg)		(__raw_readb(portaddr(port, reg)))
 #define rd_regl(port, reg)		(__raw_readl(portaddr(port, reg)))
-#define wr_regb(port, reg, val)		__raw_writeb(val, portaddr(port, reg))
 #define wr_regl(port, reg, val)		__raw_writel(val, portaddr(port, reg))
 
 /* UART Port Mask */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index dd3a96e07026..c7f61ac27132 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -194,9 +194,9 @@ static inline u32 asc_txfifo_is_empty(struct uart_port *port)
 	return asc_in(port, ASC_STA) & ASC_STA_TE;
 }
 
-static inline int asc_txfifo_is_full(struct uart_port *port)
+static inline u32 asc_txfifo_is_half_empty(struct uart_port *port)
 {
-	return asc_in(port, ASC_STA) & ASC_STA_TF;
+	return asc_in(port, ASC_STA) & ASC_STA_THE;
 }
 
 static inline const char *asc_port_name(struct uart_port *port)
@@ -628,7 +628,7 @@ static int asc_get_poll_char(struct uart_port *port)
 
 static void asc_put_poll_char(struct uart_port *port, unsigned char c)
 {
-	while (asc_txfifo_is_full(port))
+	while (!asc_txfifo_is_half_empty(port))
 		cpu_relax();
 	asc_out(port, ASC_TXBUF, c);
 }
@@ -783,7 +783,7 @@ static void asc_console_putchar(struct uart_port *port, int ch)
 	unsigned int timeout = 1000000;
 
 	/* Wait for upto 1 second in case flow control is stopping us. */
-	while (--timeout && asc_txfifo_is_full(port))
+	while (--timeout && !asc_txfifo_is_half_empty(port))
 		udelay(1);
 
 	asc_out(port, ASC_TXBUF, ch);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 5f90ef24d475..dce27f34937e 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -418,14 +418,23 @@ static struct uart_ops ulite_ops = {
 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 static void ulite_console_wait_tx(struct uart_port *port)
 {
-	int i;
 	u8 val;
-
-	/* Spin waiting for TX fifo to have space available */
-	for (i = 0; i < 100000; i++) {
+	unsigned long timeout;
+
+	/*
+	 * Spin waiting for TX fifo to have space available.
+	 * When using the Microblaze Debug Module this can take up to 1s
+	 */
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (1) {
 		val = uart_in32(ULITE_STATUS, port);
 		if ((val & ULITE_STATUS_TXFULL) == 0)
 			break;
+		if (time_after(jiffies, timeout)) {
+			dev_warn(port->dev,
+				 "timeout waiting for TX buffer empty\n");
+			break;
+		}
 		cpu_relax();
 	}
 }
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f619ad5b5eae..8809775e2ba3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,7 +1,7 @@
 /*
- * Xilinx PS UART driver
+ * Cadence UART driver (found in Xilinx Zynq)
  *
- * 2011 - 2013 (C) Xilinx Inc.
+ * 2011 - 2014 (C) Xilinx Inc.
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General Public
@@ -9,6 +9,9 @@
  * either version 2 of the License, or (at your option) any
  * later version.
  *
+ * This driver has originally been pushed by Xilinx using a Zynq-branding. This
+ * still shows in the naming of this file, the kconfig symbols and some symbols
+ * in the code.
  */
 
 #if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -28,16 +31,16 @@
 #include <linux/of.h>
 #include <linux/module.h>
 
-#define XUARTPS_TTY_NAME	"ttyPS"
-#define XUARTPS_NAME		"xuartps"
-#define XUARTPS_MAJOR		0	/* use dynamic node allocation */
-#define XUARTPS_MINOR		0	/* works best with devtmpfs */
-#define XUARTPS_NR_PORTS	2
-#define XUARTPS_FIFO_SIZE	64	/* FIFO size */
-#define XUARTPS_REGISTER_SPACE	0xFFF
+#define CDNS_UART_TTY_NAME	"ttyPS"
+#define CDNS_UART_NAME		"xuartps"
+#define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
+#define CDNS_UART_MINOR		0	/* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS	2
+#define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
+#define CDNS_UART_REGISTER_SPACE	0xFFF
 
-#define xuartps_readl(offset)		ioread32(port->membase + offset)
-#define xuartps_writel(val, offset)	iowrite32(val, port->membase + offset)
+#define cdns_uart_readl(offset)		ioread32(port->membase + offset)
+#define cdns_uart_writel(val, offset)	iowrite32(val, port->membase + offset)
 
 /* Rx Trigger level */
 static int rx_trigger_level = 56;
@@ -49,77 +52,62 @@ static int rx_timeout = 10;
 module_param(rx_timeout, uint, S_IRUGO);
 MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
 
-/********************************Register Map********************************/
-/** UART
- *
- * Register offsets for the UART.
- *
- */
-#define XUARTPS_CR_OFFSET	0x00  /* Control Register [8:0] */
-#define XUARTPS_MR_OFFSET	0x04  /* Mode Register [10:0] */
-#define XUARTPS_IER_OFFSET	0x08  /* Interrupt Enable [10:0] */
-#define XUARTPS_IDR_OFFSET	0x0C  /* Interrupt Disable [10:0] */
-#define XUARTPS_IMR_OFFSET	0x10  /* Interrupt Mask [10:0] */
-#define XUARTPS_ISR_OFFSET	0x14  /* Interrupt Status [10:0]*/
-#define XUARTPS_BAUDGEN_OFFSET	0x18  /* Baud Rate Generator [15:0] */
-#define XUARTPS_RXTOUT_OFFSET	0x1C  /* RX Timeout [7:0] */
-#define XUARTPS_RXWM_OFFSET	0x20  /* RX FIFO Trigger Level [5:0] */
-#define XUARTPS_MODEMCR_OFFSET	0x24  /* Modem Control [5:0] */
-#define XUARTPS_MODEMSR_OFFSET	0x28  /* Modem Status [8:0] */
-#define XUARTPS_SR_OFFSET	0x2C  /* Channel Status [11:0] */
-#define XUARTPS_FIFO_OFFSET	0x30  /* FIFO [15:0] or [7:0] */
-#define XUARTPS_BAUDDIV_OFFSET	0x34  /* Baud Rate Divider [7:0] */
-#define XUARTPS_FLOWDEL_OFFSET	0x38  /* Flow Delay [15:0] */
-#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse
-						Width [15:0] */
-#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse
-						Width [7:0] */
-#define XUARTPS_TXWM_OFFSET	0x44  /* TX FIFO Trigger Level [5:0] */
-
-/** Control Register
- *
- * The Control register (CR) controls the major functions of the device.
- *
- * Control Register Bit Definitions
- */
-#define XUARTPS_CR_STOPBRK	0x00000100  /* Stop TX break */
-#define XUARTPS_CR_STARTBRK	0x00000080  /* Set TX break */
-#define XUARTPS_CR_TX_DIS	0x00000020  /* TX disabled. */
-#define XUARTPS_CR_TX_EN	0x00000010  /* TX enabled */
-#define XUARTPS_CR_RX_DIS	0x00000008  /* RX disabled. */
-#define XUARTPS_CR_RX_EN	0x00000004  /* RX enabled */
-#define XUARTPS_CR_TXRST	0x00000002  /* TX logic reset */
-#define XUARTPS_CR_RXRST	0x00000001  /* RX logic reset */
-#define XUARTPS_CR_RST_TO	0x00000040  /* Restart Timeout Counter */
-
-/** Mode Register
- *
+/* Register offsets for the UART. */
+#define CDNS_UART_CR_OFFSET		0x00  /* Control Register */
+#define CDNS_UART_MR_OFFSET		0x04  /* Mode Register */
+#define CDNS_UART_IER_OFFSET		0x08  /* Interrupt Enable */
+#define CDNS_UART_IDR_OFFSET		0x0C  /* Interrupt Disable */
+#define CDNS_UART_IMR_OFFSET		0x10  /* Interrupt Mask */
+#define CDNS_UART_ISR_OFFSET		0x14  /* Interrupt Status */
+#define CDNS_UART_BAUDGEN_OFFSET	0x18  /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT_OFFSET		0x1C  /* RX Timeout */
+#define CDNS_UART_RXWM_OFFSET		0x20  /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR_OFFSET	0x24  /* Modem Control */
+#define CDNS_UART_MODEMSR_OFFSET	0x28  /* Modem Status */
+#define CDNS_UART_SR_OFFSET		0x2C  /* Channel Status */
+#define CDNS_UART_FIFO_OFFSET		0x30  /* FIFO */
+#define CDNS_UART_BAUDDIV_OFFSET	0x34  /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL_OFFSET	0x38  /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH_OFFSET	0x3C  /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH_OFFSET	0x40  /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM_OFFSET		0x44  /* TX FIFO Trigger Level */
+
+/* Control Register Bit Definitions */
+#define CDNS_UART_CR_STOPBRK	0x00000100  /* Stop TX break */
+#define CDNS_UART_CR_STARTBRK	0x00000080  /* Set TX break */
+#define CDNS_UART_CR_TX_DIS	0x00000020  /* TX disabled. */
+#define CDNS_UART_CR_TX_EN	0x00000010  /* TX enabled */
+#define CDNS_UART_CR_RX_DIS	0x00000008  /* RX disabled. */
+#define CDNS_UART_CR_RX_EN	0x00000004  /* RX enabled */
+#define CDNS_UART_CR_TXRST	0x00000002  /* TX logic reset */
+#define CDNS_UART_CR_RXRST	0x00000001  /* RX logic reset */
+#define CDNS_UART_CR_RST_TO	0x00000040  /* Restart Timeout Counter */
+
+/*
+ * Mode Register:
  * The mode register (MR) defines the mode of transfer as well as the data
  * format. If this register is modified during transmission or reception,
  * data validity cannot be guaranteed.
- *
- * Mode Register Bit Definitions
- *
  */
-#define XUARTPS_MR_CLKSEL		0x00000001  /* Pre-scalar selection */
-#define XUARTPS_MR_CHMODE_L_LOOP	0x00000200  /* Local loop back mode */
-#define XUARTPS_MR_CHMODE_NORM		0x00000000  /* Normal mode */
+#define CDNS_UART_MR_CLKSEL		0x00000001  /* Pre-scalar selection */
+#define CDNS_UART_MR_CHMODE_L_LOOP	0x00000200  /* Local loop back mode */
+#define CDNS_UART_MR_CHMODE_NORM	0x00000000  /* Normal mode */
 
-#define XUARTPS_MR_STOPMODE_2_BIT	0x00000080  /* 2 stop bits */
-#define XUARTPS_MR_STOPMODE_1_BIT	0x00000000  /* 1 stop bit */
+#define CDNS_UART_MR_STOPMODE_2_BIT	0x00000080  /* 2 stop bits */
+#define CDNS_UART_MR_STOPMODE_1_BIT	0x00000000  /* 1 stop bit */
 
-#define XUARTPS_MR_PARITY_NONE		0x00000020  /* No parity mode */
-#define XUARTPS_MR_PARITY_MARK		0x00000018  /* Mark parity mode */
-#define XUARTPS_MR_PARITY_SPACE		0x00000010  /* Space parity mode */
-#define XUARTPS_MR_PARITY_ODD		0x00000008  /* Odd parity mode */
-#define XUARTPS_MR_PARITY_EVEN		0x00000000  /* Even parity mode */
+#define CDNS_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
+#define CDNS_UART_MR_PARITY_MARK	0x00000018  /* Mark parity mode */
+#define CDNS_UART_MR_PARITY_SPACE	0x00000010  /* Space parity mode */
+#define CDNS_UART_MR_PARITY_ODD		0x00000008  /* Odd parity mode */
+#define CDNS_UART_MR_PARITY_EVEN	0x00000000  /* Even parity mode */
 
-#define XUARTPS_MR_CHARLEN_6_BIT	0x00000006  /* 6 bits data */
-#define XUARTPS_MR_CHARLEN_7_BIT	0x00000004  /* 7 bits data */
-#define XUARTPS_MR_CHARLEN_8_BIT	0x00000000  /* 8 bits data */
+#define CDNS_UART_MR_CHARLEN_6_BIT	0x00000006  /* 6 bits data */
+#define CDNS_UART_MR_CHARLEN_7_BIT	0x00000004  /* 7 bits data */
+#define CDNS_UART_MR_CHARLEN_8_BIT	0x00000000  /* 8 bits data */
 
-/** Interrupt Registers
- *
+/*
+ * Interrupt Registers:
  * Interrupt control logic uses the interrupt enable register (IER) and the
  * interrupt disable register (IDR) to set the value of the bits in the
  * interrupt mask register (IMR). The IMR determines whether to pass an
@@ -127,65 +115,65 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
  * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
  * interrupt. IMR and ISR are read only, and IER and IDR are write only.
  * Reading either IER or IDR returns 0x00.
- *
  * All four registers have the same bit definitions.
  */
-#define XUARTPS_IXR_TOUT	0x00000100 /* RX Timeout error interrupt */
-#define XUARTPS_IXR_PARITY	0x00000080 /* Parity error interrupt */
-#define XUARTPS_IXR_FRAMING	0x00000040 /* Framing error interrupt */
-#define XUARTPS_IXR_OVERRUN	0x00000020 /* Overrun error interrupt */
-#define XUARTPS_IXR_TXFULL	0x00000010 /* TX FIFO Full interrupt */
-#define XUARTPS_IXR_TXEMPTY	0x00000008 /* TX FIFO empty interrupt */
-#define XUARTPS_ISR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt */
-#define XUARTPS_IXR_RXTRIG	0x00000001 /* RX FIFO trigger interrupt */
-#define XUARTPS_IXR_RXFULL	0x00000004 /* RX FIFO full interrupt. */
-#define XUARTPS_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
-#define XUARTPS_IXR_MASK	0x00001FFF /* Valid bit mask */
+#define CDNS_UART_IXR_TOUT	0x00000100 /* RX Timeout error interrupt */
+#define CDNS_UART_IXR_PARITY	0x00000080 /* Parity error interrupt */
+#define CDNS_UART_IXR_FRAMING	0x00000040 /* Framing error interrupt */
+#define CDNS_UART_IXR_OVERRUN	0x00000020 /* Overrun error interrupt */
+#define CDNS_UART_IXR_TXFULL	0x00000010 /* TX FIFO Full interrupt */
+#define CDNS_UART_IXR_TXEMPTY	0x00000008 /* TX FIFO empty interrupt */
+#define CDNS_UART_ISR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt */
+#define CDNS_UART_IXR_RXTRIG	0x00000001 /* RX FIFO trigger interrupt */
+#define CDNS_UART_IXR_RXFULL	0x00000004 /* RX FIFO full interrupt. */
+#define CDNS_UART_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
+#define CDNS_UART_IXR_MASK	0x00001FFF /* Valid bit mask */
 
 /* Goes in read_status_mask for break detection as the HW doesn't do it*/
-#define XUARTPS_IXR_BRK		0x80000000
+#define CDNS_UART_IXR_BRK	0x80000000
 
-/** Channel Status Register
- *
+/*
+ * Channel Status Register:
  * The channel status register (CSR) is provided to enable the control logic
  * to monitor the status of bits in the channel interrupt status register,
  * even if these are masked out by the interrupt mask register.
  */
-#define XUARTPS_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
-#define XUARTPS_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
-#define XUARTPS_SR_TXFULL	0x00000010 /* TX FIFO full */
-#define XUARTPS_SR_RXTRIG	0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
+#define CDNS_UART_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
+#define CDNS_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
+#define CDNS_UART_SR_RXTRIG	0x00000001 /* Rx Trigger */
 
 /* baud dividers min/max values */
-#define XUARTPS_BDIV_MIN	4
-#define XUARTPS_BDIV_MAX	255
-#define XUARTPS_CD_MAX		65535
+#define CDNS_UART_BDIV_MIN	4
+#define CDNS_UART_BDIV_MAX	255
+#define CDNS_UART_CD_MAX	65535
 
 /**
- * struct xuartps - device data
- * @port		Pointer to the UART port
- * @refclk		Reference clock
- * @aperclk		APB clock
- * @baud		Current baud rate
- * @clk_rate_change_nb	Notifier block for clock changes
+ * struct cdns_uart - device data
+ * @port:		Pointer to the UART port
+ * @uartclk:		Reference clock
+ * @pclk:		APB clock
+ * @baud:		Current baud rate
+ * @clk_rate_change_nb:	Notifier block for clock changes
  */
-struct xuartps {
+struct cdns_uart {
 	struct uart_port	*port;
-	struct clk		*refclk;
-	struct clk		*aperclk;
+	struct clk		*uartclk;
+	struct clk		*pclk;
 	unsigned int		baud;
 	struct notifier_block	clk_rate_change_nb;
 };
-#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
+#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
+		clk_rate_change_nb);
 
 /**
- * xuartps_isr - Interrupt handler
+ * cdns_uart_isr - Interrupt handler
  * @irq: Irq number
  * @dev_id: Id of the port
  *
- * Returns IRQHANDLED
- **/
-static irqreturn_t xuartps_isr(int irq, void *dev_id)
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
 {
 	struct uart_port *port = (struct uart_port *)dev_id;
 	unsigned long flags;
@@ -198,43 +186,42 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 	/* Read the interrupt status register to determine which
 	 * interrupt(s) is/are active.
 	 */
-	isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
+	isrstatus = cdns_uart_readl(CDNS_UART_ISR_OFFSET);
 
 	/*
 	 * There is no hardware break detection, so we interpret framing
 	 * error with all-zeros data as a break sequence. Most of the time,
 	 * there's another non-zero byte at the end of the sequence.
 	 */
-
-	if (isrstatus & XUARTPS_IXR_FRAMING) {
-		while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
-					XUARTPS_SR_RXEMPTY)) {
-			if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
-				port->read_status_mask |= XUARTPS_IXR_BRK;
-				isrstatus &= ~XUARTPS_IXR_FRAMING;
+	if (isrstatus & CDNS_UART_IXR_FRAMING) {
+		while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+					CDNS_UART_SR_RXEMPTY)) {
+			if (!cdns_uart_readl(CDNS_UART_FIFO_OFFSET)) {
+				port->read_status_mask |= CDNS_UART_IXR_BRK;
+				isrstatus &= ~CDNS_UART_IXR_FRAMING;
 			}
 		}
-		xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_FRAMING, CDNS_UART_ISR_OFFSET);
 	}
 
 	/* drop byte with parity error if IGNPAR specified */
-	if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
-		isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
+	if (isrstatus & port->ignore_status_mask & CDNS_UART_IXR_PARITY)
+		isrstatus &= ~(CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT);
 
 	isrstatus &= port->read_status_mask;
 	isrstatus &= ~port->ignore_status_mask;
 
-	if ((isrstatus & XUARTPS_IXR_TOUT) ||
-		(isrstatus & XUARTPS_IXR_RXTRIG)) {
+	if ((isrstatus & CDNS_UART_IXR_TOUT) ||
+		(isrstatus & CDNS_UART_IXR_RXTRIG)) {
 		/* Receive Timeout Interrupt */
-		while ((xuartps_readl(XUARTPS_SR_OFFSET) &
-			XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
-			data = xuartps_readl(XUARTPS_FIFO_OFFSET);
+		while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+			CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+			data = cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 
 			/* Non-NULL byte after BREAK is garbage (99%) */
 			if (data && (port->read_status_mask &
-						XUARTPS_IXR_BRK)) {
-				port->read_status_mask &= ~XUARTPS_IXR_BRK;
+						CDNS_UART_IXR_BRK)) {
+				port->read_status_mask &= ~CDNS_UART_IXR_BRK;
 				port->icount.brk++;
 				if (uart_handle_break(port))
 					continue;
@@ -258,16 +245,17 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 
 			port->icount.rx++;
 
-			if (isrstatus & XUARTPS_IXR_PARITY) {
+			if (isrstatus & CDNS_UART_IXR_PARITY) {
 				port->icount.parity++;
 				status = TTY_PARITY;
-			} else if (isrstatus & XUARTPS_IXR_FRAMING) {
+			} else if (isrstatus & CDNS_UART_IXR_FRAMING) {
 				port->icount.frame++;
 				status = TTY_FRAME;
-			} else if (isrstatus & XUARTPS_IXR_OVERRUN)
+			} else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
 				port->icount.overrun++;
+			}
 
-			uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
+			uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
 					data, status);
 		}
 		spin_unlock(&port->lock);
@@ -276,10 +264,10 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 	}
 
 	/* Dispatch an appropriate handler */
-	if ((isrstatus & XUARTPS_IXR_TXEMPTY) == XUARTPS_IXR_TXEMPTY) {
+	if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
 		if (uart_circ_empty(&port->state->xmit)) {
-			xuartps_writel(XUARTPS_IXR_TXEMPTY,
-						XUARTPS_IDR_OFFSET);
+			cdns_uart_writel(CDNS_UART_IXR_TXEMPTY,
+						CDNS_UART_IDR_OFFSET);
 		} else {
 			numbytes = port->fifosize;
 			/* Break if no more data available in the UART buffer */
@@ -287,12 +275,12 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 				if (uart_circ_empty(&port->state->xmit))
 					break;
 				/* Get the data from the UART circular buffer
-				 * and write it to the xuartps's TX_FIFO
+				 * and write it to the cdns_uart's TX_FIFO
 				 * register.
 				 */
-				xuartps_writel(
+				cdns_uart_writel(
 					port->state->xmit.buf[port->state->xmit.
-					tail], XUARTPS_FIFO_OFFSET);
+					tail], CDNS_UART_FIFO_OFFSET);
 
 				port->icount.tx++;
 
@@ -300,7 +288,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 				 * the buffer if it reaches limit.
 				 */
 				port->state->xmit.tail =
-					(port->state->xmit.tail + 1) & \
+					(port->state->xmit.tail + 1) &
 						(UART_XMIT_SIZE - 1);
 			}
 
@@ -310,7 +298,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 		}
 	}
 
-	xuartps_writel(isrstatus, XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(isrstatus, CDNS_UART_ISR_OFFSET);
 
 	/* be sure to release the lock and tty before leaving */
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -319,13 +307,13 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 }
 
 /**
- * xuartps_calc_baud_divs - Calculate baud rate divisors
+ * cdns_uart_calc_baud_divs - Calculate baud rate divisors
  * @clk: UART module input clock
  * @baud: Desired baud rate
  * @rbdiv: BDIV value (return value)
  * @rcd: CD value (return value)
  * @div8: Value for clk_sel bit in mod (return value)
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	was too much error, zero if no valid divisors are found.
  *
  * Formula to obtain baud rate is
@@ -338,8 +326,8 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
  *			baud rate generate register
  *			baud rate clock divisor register
  */
-static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
-		u32 *rbdiv, u32 *rcd, int *div8)
+static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
+		unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
 {
 	u32 cd, bdiv;
 	unsigned int calc_baud;
@@ -347,16 +335,16 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
 	unsigned int bauderror;
 	unsigned int besterror = ~0;
 
-	if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
+	if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
 		*div8 = 1;
 		clk /= 8;
 	} else {
 		*div8 = 0;
 	}
 
-	for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
+	for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
 		cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
-		if (cd < 1 || cd > XUARTPS_CD_MAX)
+		if (cd < 1 || cd > CDNS_UART_CD_MAX)
 			continue;
 
 		calc_baud = clk / (cd * (bdiv + 1));
@@ -381,47 +369,47 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
 }
 
 /**
- * xuartps_set_baud_rate - Calculate and set the baud rate
+ * cdns_uart_set_baud_rate - Calculate and set the baud rate
  * @port: Handle to the uart port structure
  * @baud: Baud rate to set
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	   was too much error, zero if no valid divisors are found.
  */
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
+static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
 		unsigned int baud)
 {
 	unsigned int calc_baud;
 	u32 cd = 0, bdiv = 0;
 	u32 mreg;
 	int div8;
-	struct xuartps *xuartps = port->private_data;
+	struct cdns_uart *cdns_uart = port->private_data;
 
-	calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+	calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
 			&div8);
 
 	/* Write new divisors to hardware */
-	mreg = xuartps_readl(XUARTPS_MR_OFFSET);
+	mreg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
 	if (div8)
-		mreg |= XUARTPS_MR_CLKSEL;
+		mreg |= CDNS_UART_MR_CLKSEL;
 	else
-		mreg &= ~XUARTPS_MR_CLKSEL;
-	xuartps_writel(mreg, XUARTPS_MR_OFFSET);
-	xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
-	xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
-	xuartps->baud = baud;
+		mreg &= ~CDNS_UART_MR_CLKSEL;
+	cdns_uart_writel(mreg, CDNS_UART_MR_OFFSET);
+	cdns_uart_writel(cd, CDNS_UART_BAUDGEN_OFFSET);
+	cdns_uart_writel(bdiv, CDNS_UART_BAUDDIV_OFFSET);
+	cdns_uart->baud = baud;
 
 	return calc_baud;
 }
 
 #ifdef CONFIG_COMMON_CLK
 /**
- * xuartps_clk_notitifer_cb - Clock notifier callback
+ * cdns_uart_clk_notitifer_cb - Clock notifier callback
  * @nb:		Notifier block
  * @event:	Notify event
  * @data:	Notifier data
- * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ * Return:	NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
  */
-static int xuartps_clk_notifier_cb(struct notifier_block *nb,
+static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
 		unsigned long event, void *data)
 {
 	u32 ctrl_reg;
@@ -429,35 +417,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 	int locked = 0;
 	struct clk_notifier_data *ndata = data;
 	unsigned long flags = 0;
-	struct xuartps *xuartps = to_xuartps(nb);
+	struct cdns_uart *cdns_uart = to_cdns_uart(nb);
 
-	port = xuartps->port;
+	port = cdns_uart->port;
 	if (port->suspended)
 		return NOTIFY_OK;
 
 	switch (event) {
 	case PRE_RATE_CHANGE:
 	{
-		u32 bdiv;
-		u32 cd;
+		u32 bdiv, cd;
 		int div8;
 
 		/*
 		 * Find out if current baud-rate can be achieved with new clock
 		 * frequency.
 		 */
-		if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
-					&bdiv, &cd, &div8))
+		if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
+					&bdiv, &cd, &div8)) {
+			dev_warn(port->dev, "clock rate change rejected\n");
 			return NOTIFY_BAD;
+		}
 
-		spin_lock_irqsave(&xuartps->port->lock, flags);
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		/* Disable the TX and RX to set baud rate */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
-				XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
 
 		return NOTIFY_OK;
 	}
@@ -467,25 +456,25 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 		 * frequency.
 		 */
 
-		spin_lock_irqsave(&xuartps->port->lock, flags);
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		locked = 1;
 		port->uartclk = ndata->new_rate;
 
-		xuartps->baud = xuartps_set_baud_rate(xuartps->port,
-				xuartps->baud);
+		cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
+				cdns_uart->baud);
 		/* fall through */
 	case ABORT_RATE_CHANGE:
 		if (!locked)
-			spin_lock_irqsave(&xuartps->port->lock, flags);
+			spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		/* Set TX/RX Reset */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-				XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		while (xuartps_readl(XUARTPS_CR_OFFSET) &
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+		while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
 			cpu_relax();
 
 		/*
@@ -493,14 +482,13 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 		 * enable bit and RX enable bit to enable the transmitter and
 		 * receiver.
 		 */
-		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
-		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-		xuartps_writel(
-			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
-			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+		cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
 
 		return NOTIFY_OK;
 	default:
@@ -509,40 +497,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 }
 #endif
 
-/*----------------------Uart Operations---------------------------*/
-
 /**
- * xuartps_start_tx -  Start transmitting bytes
+ * cdns_uart_start_tx -  Start transmitting bytes
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_start_tx(struct uart_port *port)
+ */
+static void cdns_uart_start_tx(struct uart_port *port)
 {
 	unsigned int status, numbytes = port->fifosize;
 
 	if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
 		return;
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 	/* Set the TX enable bit and clear the TX disable bit to enable the
 	 * transmitter.
 	 */
-	xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
-		XUARTPS_CR_OFFSET);
-
-	while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET)
-		& XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
+	cdns_uart_writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+		CDNS_UART_CR_OFFSET);
 
+	while (numbytes-- && ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+				CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
 		/* Break if no more data available in the UART buffer */
 		if (uart_circ_empty(&port->state->xmit))
 			break;
 
 		/* Get the data from the UART circular buffer and
-		 * write it to the xuartps's TX_FIFO register.
+		 * write it to the cdns_uart's TX_FIFO register.
 		 */
-		xuartps_writel(
+		cdns_uart_writel(
 			port->state->xmit.buf[port->state->xmit.tail],
-			XUARTPS_FIFO_OFFSET);
+			CDNS_UART_FIFO_OFFSET);
 		port->icount.tx++;
 
 		/* Adjust the tail of the UART buffer and wrap
@@ -551,94 +535,90 @@ static void xuartps_start_tx(struct uart_port *port)
 		port->state->xmit.tail = (port->state->xmit.tail + 1) &
 					(UART_XMIT_SIZE - 1);
 	}
-	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_ISR_OFFSET);
 	/* Enable the TX Empty interrupt */
-	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_IER_OFFSET);
 
 	if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 }
 
 /**
- * xuartps_stop_tx - Stop TX
+ * cdns_uart_stop_tx - Stop TX
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_tx(struct uart_port *port)
+ */
+static void cdns_uart_stop_tx(struct uart_port *port)
 {
 	unsigned int regval;
 
-	regval = xuartps_readl(XUARTPS_CR_OFFSET);
-	regval |= XUARTPS_CR_TX_DIS;
+	regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	regval |= CDNS_UART_CR_TX_DIS;
 	/* Disable the transmitter */
-	xuartps_writel(regval, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
 }
 
 /**
- * xuartps_stop_rx - Stop RX
+ * cdns_uart_stop_rx - Stop RX
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_rx(struct uart_port *port)
+ */
+static void cdns_uart_stop_rx(struct uart_port *port)
 {
 	unsigned int regval;
 
-	regval = xuartps_readl(XUARTPS_CR_OFFSET);
-	regval |= XUARTPS_CR_RX_DIS;
+	regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	regval |= CDNS_UART_CR_RX_DIS;
 	/* Disable the receiver */
-	xuartps_writel(regval, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
 }
 
 /**
- * xuartps_tx_empty -  Check whether TX is empty
+ * cdns_uart_tx_empty -  Check whether TX is empty
  * @port: Handle to the uart port structure
  *
- * Returns TIOCSER_TEMT on success, 0 otherwise
- **/
-static unsigned int xuartps_tx_empty(struct uart_port *port)
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
 {
 	unsigned int status;
 
-	status = xuartps_readl(XUARTPS_ISR_OFFSET) & XUARTPS_IXR_TXEMPTY;
+	status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
 	return status ? TIOCSER_TEMT : 0;
 }
 
 /**
- * xuartps_break_ctl - Based on the input ctl we have to start or stop
+ * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
  *			transmitting char breaks
  * @port: Handle to the uart port structure
  * @ctl: Value based on which start or stop decision is taken
- *
- **/
-static void xuartps_break_ctl(struct uart_port *port, int ctl)
+ */
+static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
 {
 	unsigned int status;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 
 	if (ctl == -1)
-		xuartps_writel(XUARTPS_CR_STARTBRK | status,
-					XUARTPS_CR_OFFSET);
+		cdns_uart_writel(CDNS_UART_CR_STARTBRK | status,
+					CDNS_UART_CR_OFFSET);
 	else {
-		if ((status & XUARTPS_CR_STOPBRK) == 0)
-			xuartps_writel(XUARTPS_CR_STOPBRK | status,
-					 XUARTPS_CR_OFFSET);
+		if ((status & CDNS_UART_CR_STOPBRK) == 0)
+			cdns_uart_writel(CDNS_UART_CR_STOPBRK | status,
+					 CDNS_UART_CR_OFFSET);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_set_termios - termios operations, handling data length, parity,
+ * cdns_uart_set_termios - termios operations, handling data length, parity,
  *				stop bits, flow control, baud rate
  * @port: Handle to the uart port structure
  * @termios: Handle to the input termios structure
  * @old: Values of the previously saved termios structure
- *
- **/
-static void xuartps_set_termios(struct uart_port *port,
+ */
+static void cdns_uart_set_termios(struct uart_port *port,
 				struct ktermios *termios, struct ktermios *old)
 {
 	unsigned int cval = 0;
@@ -649,81 +629,79 @@ static void xuartps_set_termios(struct uart_port *port,
 	spin_lock_irqsave(&port->lock, flags);
 
 	/* Empty the receive FIFO 1st before making changes */
-	while ((xuartps_readl(XUARTPS_SR_OFFSET) &
-		 XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
-		xuartps_readl(XUARTPS_FIFO_OFFSET);
+	while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+		 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+		cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 	}
 
 	/* Disable the TX and RX to set baud rate */
-	xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-			(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
 	/*
 	 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
 	 * min and max baud should be calculated here based on port->uartclk.
 	 * this way we get a valid baud and can safely call set_baud()
 	 */
-	minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
-	maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
+	minbaud = port->uartclk /
+			((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
+	maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
 	baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
-	baud = xuartps_set_baud_rate(port, baud);
+	baud = cdns_uart_set_baud_rate(port, baud);
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
 
-	/*
-	 * Update the per-port timeout.
-	 */
+	/* Update the per-port timeout. */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
 	/* Set TX/RX Reset */
-	xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-			(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-	ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-
-	/* Clear the RX disable and TX disable bits and then set the TX enable
+	/*
+	 * Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
 	 */
-	xuartps_writel(
-		(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
-			| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+	ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+	cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 
-	port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
-			XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
+	port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
 	port->ignore_status_mask = 0;
 
 	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= XUARTPS_IXR_PARITY |
-		XUARTPS_IXR_FRAMING;
+		port->read_status_mask |= CDNS_UART_IXR_PARITY |
+		CDNS_UART_IXR_FRAMING;
 
 	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= XUARTPS_IXR_PARITY |
-			XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+		port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
 
 	/* ignore all characters if CREAD is not set */
 	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= XUARTPS_IXR_RXTRIG |
-			XUARTPS_IXR_TOUT | XUARTPS_IXR_PARITY |
-			XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+		port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
 
-	mode_reg = xuartps_readl(XUARTPS_MR_OFFSET);
+	mode_reg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
 
 	/* Handling Data Size */
 	switch (termios->c_cflag & CSIZE) {
 	case CS6:
-		cval |= XUARTPS_MR_CHARLEN_6_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_6_BIT;
 		break;
 	case CS7:
-		cval |= XUARTPS_MR_CHARLEN_7_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_7_BIT;
 		break;
 	default:
 	case CS8:
-		cval |= XUARTPS_MR_CHARLEN_8_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_8_BIT;
 		termios->c_cflag &= ~CSIZE;
 		termios->c_cflag |= CS8;
 		break;
@@ -731,134 +709,135 @@ static void xuartps_set_termios(struct uart_port *port,
 
 	/* Handling Parity and Stop Bits length */
 	if (termios->c_cflag & CSTOPB)
-		cval |= XUARTPS_MR_STOPMODE_2_BIT; /* 2 STOP bits */
+		cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
 	else
-		cval |= XUARTPS_MR_STOPMODE_1_BIT; /* 1 STOP bit */
+		cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
 
 	if (termios->c_cflag & PARENB) {
 		/* Mark or Space parity */
 		if (termios->c_cflag & CMSPAR) {
 			if (termios->c_cflag & PARODD)
-				cval |= XUARTPS_MR_PARITY_MARK;
+				cval |= CDNS_UART_MR_PARITY_MARK;
 			else
-				cval |= XUARTPS_MR_PARITY_SPACE;
+				cval |= CDNS_UART_MR_PARITY_SPACE;
 		} else {
 			if (termios->c_cflag & PARODD)
-				cval |= XUARTPS_MR_PARITY_ODD;
+				cval |= CDNS_UART_MR_PARITY_ODD;
 			else
-				cval |= XUARTPS_MR_PARITY_EVEN;
+				cval |= CDNS_UART_MR_PARITY_EVEN;
 		}
 	} else {
-		cval |= XUARTPS_MR_PARITY_NONE;
+		cval |= CDNS_UART_MR_PARITY_NONE;
 	}
 	cval |= mode_reg & 1;
-	xuartps_writel(cval, XUARTPS_MR_OFFSET);
+	cdns_uart_writel(cval, CDNS_UART_MR_OFFSET);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_startup - Called when an application opens a xuartps port
+ * cdns_uart_startup - Called when an application opens a cdns_uart port
  * @port: Handle to the uart port structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_startup(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_startup(struct uart_port *port)
 {
 	unsigned int retval = 0, status = 0;
 
-	retval = request_irq(port->irq, xuartps_isr, 0, XUARTPS_NAME,
+	retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
 								(void *)port);
 	if (retval)
 		return retval;
 
 	/* Disable the TX and RX */
-	xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
-						XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+						CDNS_UART_CR_OFFSET);
 
 	/* Set the Control Register with TX/RX Enable, TX/RX Reset,
 	 * no break chars.
 	 */
-	xuartps_writel(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST,
-				XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
+				CDNS_UART_CR_OFFSET);
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 
 	/* Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
 	 */
-	xuartps_writel((status & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
-			| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN |
-			XUARTPS_CR_STOPBRK), XUARTPS_CR_OFFSET);
+	cdns_uart_writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
+			| (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
+			CDNS_UART_CR_STOPBRK), CDNS_UART_CR_OFFSET);
 
 	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
 	 * no parity.
 	 */
-	xuartps_writel(XUARTPS_MR_CHMODE_NORM | XUARTPS_MR_STOPMODE_1_BIT
-		| XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
-		 XUARTPS_MR_OFFSET);
+	cdns_uart_writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
+		| CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
+		 CDNS_UART_MR_OFFSET);
 
 	/*
 	 * Set the RX FIFO Trigger level to use most of the FIFO, but it
 	 * can be tuned with a module parameter
 	 */
-	xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+	cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
 
 	/*
 	 * Receive Timeout register is enabled but it
 	 * can be tuned with a module parameter
 	 */
-	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+	cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 
 	/* Clear out any pending interrupts before enabling them */
-	xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(cdns_uart_readl(CDNS_UART_ISR_OFFSET),
+			CDNS_UART_ISR_OFFSET);
 
 	/* Set the Interrupt Registers with desired interrupts */
-	xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
-		XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
-		XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY |
+		CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN |
+		CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
+		CDNS_UART_IER_OFFSET);
 
 	return retval;
 }
 
 /**
- * xuartps_shutdown - Called when an application closes a xuartps port
+ * cdns_uart_shutdown - Called when an application closes a cdns_uart port
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_shutdown(struct uart_port *port)
+ */
+static void cdns_uart_shutdown(struct uart_port *port)
 {
 	int status;
 
 	/* Disable interrupts */
-	status = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(status, XUARTPS_IDR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(status, CDNS_UART_IDR_OFFSET);
 
 	/* Disable the TX and RX */
-	xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
-				 XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+				 CDNS_UART_CR_OFFSET);
 	free_irq(port->irq, port);
 }
 
 /**
- * xuartps_type - Set UART type to xuartps port
+ * cdns_uart_type - Set UART type to cdns_uart port
  * @port: Handle to the uart port structure
  *
- * Returns string on success, NULL otherwise
- **/
-static const char *xuartps_type(struct uart_port *port)
+ * Return: string on success, NULL otherwise
+ */
+static const char *cdns_uart_type(struct uart_port *port)
 {
-	return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL;
+	return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
 }
 
 /**
- * xuartps_verify_port - Verify the port params
+ * cdns_uart_verify_port - Verify the port params
  * @port: Handle to the uart port structure
  * @ser: Handle to the structure whose members are compared
  *
- * Returns 0 if success otherwise -EINVAL
- **/
-static int xuartps_verify_port(struct uart_port *port,
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_verify_port(struct uart_port *port,
 					struct serial_struct *ser)
 {
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
@@ -875,187 +854,170 @@ static int xuartps_verify_port(struct uart_port *port,
 }
 
 /**
- * xuartps_request_port - Claim the memory region attached to xuartps port,
- *				called when the driver adds a xuartps port via
+ * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
+ *				called when the driver adds a cdns_uart port via
  *				uart_add_one_port()
  * @port: Handle to the uart port structure
  *
- * Returns 0, -ENOMEM if request fails
- **/
-static int xuartps_request_port(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_request_port(struct uart_port *port)
 {
-	if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE,
-					 XUARTPS_NAME)) {
+	if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
+					 CDNS_UART_NAME)) {
 		return -ENOMEM;
 	}
 
-	port->membase = ioremap(port->mapbase, XUARTPS_REGISTER_SPACE);
+	port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
 	if (!port->membase) {
 		dev_err(port->dev, "Unable to map registers\n");
-		release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+		release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
 		return -ENOMEM;
 	}
 	return 0;
 }
 
 /**
- * xuartps_release_port - Release the memory region attached to a xuartps
- *				port, called when the driver removes a xuartps
- *				port via uart_remove_one_port().
+ * cdns_uart_release_port - Release UART port
  * @port: Handle to the uart port structure
  *
- **/
-static void xuartps_release_port(struct uart_port *port)
+ * Release the memory region attached to a cdns_uart port. Called when the
+ * driver removes a cdns_uart port via uart_remove_one_port().
+ */
+static void cdns_uart_release_port(struct uart_port *port)
 {
-	release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+	release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
 	iounmap(port->membase);
 	port->membase = NULL;
 }
 
 /**
- * xuartps_config_port - Configure xuartps, called when the driver adds a
- *				xuartps port
+ * cdns_uart_config_port - Configure UART port
  * @port: Handle to the uart port structure
  * @flags: If any
- *
- **/
-static void xuartps_config_port(struct uart_port *port, int flags)
+ */
+static void cdns_uart_config_port(struct uart_port *port, int flags)
 {
-	if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0)
+	if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
 		port->type = PORT_XUARTPS;
 }
 
 /**
- * xuartps_get_mctrl - Get the modem control state
- *
+ * cdns_uart_get_mctrl - Get the modem control state
  * @port: Handle to the uart port structure
  *
- * Returns the modem control state
- *
- **/
-static unsigned int xuartps_get_mctrl(struct uart_port *port)
+ * Return: the modem control state
+ */
+static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
 {
 	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 }
 
-static void xuartps_set_mctrl(struct uart_port *port, unsigned int mctrl)
+static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	/* N/A */
 }
 
-static void xuartps_enable_ms(struct uart_port *port)
+static void cdns_uart_enable_ms(struct uart_port *port)
 {
 	/* N/A */
 }
 
 #ifdef CONFIG_CONSOLE_POLL
-static int xuartps_poll_get_char(struct uart_port *port)
+static int cdns_uart_poll_get_char(struct uart_port *port)
 {
 	u32 imr;
 	int c;
 
 	/* Disable all interrupts */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/* Check if FIFO is empty */
-	if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
+	if (cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY)
 		c = NO_POLL_CHAR;
 	else /* Read a character */
-		c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
+		c = (unsigned char) cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 
 	/* Enable interrupts */
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	return c;
 }
 
-static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
+static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
 {
 	u32 imr;
 
 	/* Disable all interrupts */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/* Wait until FIFO is empty */
-	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+	while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
 		cpu_relax();
 
 	/* Write a character */
-	xuartps_writel(c, XUARTPS_FIFO_OFFSET);
+	cdns_uart_writel(c, CDNS_UART_FIFO_OFFSET);
 
 	/* Wait until FIFO is empty */
-	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+	while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
 		cpu_relax();
 
 	/* Enable interrupts */
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	return;
 }
 #endif
 
-/** The UART operations structure
- */
-static struct uart_ops xuartps_ops = {
-	.set_mctrl	= xuartps_set_mctrl,
-	.get_mctrl	= xuartps_get_mctrl,
-	.enable_ms	= xuartps_enable_ms,
-
-	.start_tx	= xuartps_start_tx,	/* Start transmitting */
-	.stop_tx	= xuartps_stop_tx,	/* Stop transmission */
-	.stop_rx	= xuartps_stop_rx,	/* Stop reception */
-	.tx_empty	= xuartps_tx_empty,	/* Transmitter busy? */
-	.break_ctl	= xuartps_break_ctl,	/* Start/stop
-						 * transmitting break
-						 */
-	.set_termios	= xuartps_set_termios,	/* Set termios */
-	.startup	= xuartps_startup,	/* App opens xuartps */
-	.shutdown	= xuartps_shutdown,	/* App closes xuartps */
-	.type		= xuartps_type,		/* Set UART type */
-	.verify_port	= xuartps_verify_port,	/* Verification of port
-						 * params
-						 */
-	.request_port	= xuartps_request_port,	/* Claim resources
-						 * associated with a
-						 * xuartps port
-						 */
-	.release_port	= xuartps_release_port,	/* Release resources
-						 * associated with a
-						 * xuartps port
-						 */
-	.config_port	= xuartps_config_port,	/* Configure when driver
-						 * adds a xuartps port
-						 */
+static struct uart_ops cdns_uart_ops = {
+	.set_mctrl	= cdns_uart_set_mctrl,
+	.get_mctrl	= cdns_uart_get_mctrl,
+	.enable_ms	= cdns_uart_enable_ms,
+	.start_tx	= cdns_uart_start_tx,
+	.stop_tx	= cdns_uart_stop_tx,
+	.stop_rx	= cdns_uart_stop_rx,
+	.tx_empty	= cdns_uart_tx_empty,
+	.break_ctl	= cdns_uart_break_ctl,
+	.set_termios	= cdns_uart_set_termios,
+	.startup	= cdns_uart_startup,
+	.shutdown	= cdns_uart_shutdown,
+	.type		= cdns_uart_type,
+	.verify_port	= cdns_uart_verify_port,
+	.request_port	= cdns_uart_request_port,
+	.release_port	= cdns_uart_release_port,
+	.config_port	= cdns_uart_config_port,
 #ifdef CONFIG_CONSOLE_POLL
-	.poll_get_char	= xuartps_poll_get_char,
-	.poll_put_char	= xuartps_poll_put_char,
+	.poll_get_char	= cdns_uart_poll_get_char,
+	.poll_put_char	= cdns_uart_poll_put_char,
 #endif
 };
 
-static struct uart_port xuartps_port[2];
+static struct uart_port cdns_uart_port[2];
 
 /**
- * xuartps_get_port - Configure the port from the platform device resource
- *			info
+ * cdns_uart_get_port - Configure the port from platform device resource info
+ * @id: Port id
  *
- * Returns a pointer to a uart_port or NULL for failure
- **/
-static struct uart_port *xuartps_get_port(void)
+ * Return: a pointer to a uart_port or NULL for failure
+ */
+static struct uart_port *cdns_uart_get_port(int id)
 {
 	struct uart_port *port;
-	int id;
 
-	/* Find the next unused port */
-	for (id = 0; id < XUARTPS_NR_PORTS; id++)
-		if (xuartps_port[id].mapbase == 0)
-			break;
+	/* Try the given port id if failed use default method */
+	if (cdns_uart_port[id].mapbase != 0) {
+		/* Find the next unused port */
+		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
+			if (cdns_uart_port[id].mapbase == 0)
+				break;
+	}
 
-	if (id >= XUARTPS_NR_PORTS)
+	if (id >= CDNS_UART_NR_PORTS)
 		return NULL;
 
-	port = &xuartps_port[id];
+	port = &cdns_uart_port[id];
 
 	/* At this point, we've got an empty uart_port struct, initialize it */
 	spin_lock_init(&port->lock);
@@ -1065,50 +1027,46 @@ static struct uart_port *xuartps_get_port(void)
 	port->type	= PORT_UNKNOWN;
 	port->iotype	= UPIO_MEM32;
 	port->flags	= UPF_BOOT_AUTOCONF;
-	port->ops	= &xuartps_ops;
-	port->fifosize	= XUARTPS_FIFO_SIZE;
+	port->ops	= &cdns_uart_ops;
+	port->fifosize	= CDNS_UART_FIFO_SIZE;
 	port->line	= id;
 	port->dev	= NULL;
 	return port;
 }
 
-/*-----------------------Console driver operations--------------------------*/
-
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
- * xuartps_console_wait_tx - Wait for the TX to be full
+ * cdns_uart_console_wait_tx - Wait for the TX to be full
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_console_wait_tx(struct uart_port *port)
+ */
+static void cdns_uart_console_wait_tx(struct uart_port *port)
 {
-	while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)
-				!= XUARTPS_SR_TXEMPTY)
+	while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)
+				!= CDNS_UART_SR_TXEMPTY)
 		barrier();
 }
 
 /**
- * xuartps_console_putchar - write the character to the FIFO buffer
+ * cdns_uart_console_putchar - write the character to the FIFO buffer
  * @port: Handle to the uart port structure
  * @ch: Character to be written
- *
- **/
-static void xuartps_console_putchar(struct uart_port *port, int ch)
+ */
+static void cdns_uart_console_putchar(struct uart_port *port, int ch)
 {
-	xuartps_console_wait_tx(port);
-	xuartps_writel(ch, XUARTPS_FIFO_OFFSET);
+	cdns_uart_console_wait_tx(port);
+	cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET);
 }
 
 /**
- * xuartps_console_write - perform write operation
- * @port: Handle to the uart port structure
+ * cdns_uart_console_write - perform write operation
+ * @co: Console handle
  * @s: Pointer to character array
  * @count: No of characters
- **/
-static void xuartps_console_write(struct console *co, const char *s,
+ */
+static void cdns_uart_console_write(struct console *co, const char *s,
 				unsigned int count)
 {
-	struct uart_port *port = &xuartps_port[co->index];
+	struct uart_port *port = &cdns_uart_port[co->index];
 	unsigned long flags;
 	unsigned int imr, ctrl;
 	int locked = 1;
@@ -1119,49 +1077,45 @@ static void xuartps_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&port->lock, flags);
 
 	/* save and disable interrupt */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/*
 	 * Make sure that the tx part is enabled. Set the TX enable bit and
 	 * clear the TX disable bit to enable the transmitter.
 	 */
-	ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
-	xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
-		XUARTPS_CR_OFFSET);
+	ctrl = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	cdns_uart_writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+		CDNS_UART_CR_OFFSET);
 
-	uart_console_write(port, s, count, xuartps_console_putchar);
-	xuartps_console_wait_tx(port);
+	uart_console_write(port, s, count, cdns_uart_console_putchar);
+	cdns_uart_console_wait_tx(port);
 
-	xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(ctrl, CDNS_UART_CR_OFFSET);
 
-	/* restore interrupt state, it seems like there may be a h/w bug
-	 * in that the interrupt enable register should not need to be
-	 * written based on the data sheet
-	 */
-	xuartps_writel(~imr, XUARTPS_IDR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	/* restore interrupt state */
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	if (locked)
 		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_console_setup - Initialize the uart to default config
+ * cdns_uart_console_setup - Initialize the uart to default config
  * @co: Console handle
  * @options: Initial settings of uart
  *
- * Returns 0, -ENODEV if no device
- **/
-static int __init xuartps_console_setup(struct console *co, char *options)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int __init cdns_uart_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port = &xuartps_port[co->index];
+	struct uart_port *port = &cdns_uart_port[co->index];
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 
-	if (co->index < 0 || co->index >= XUARTPS_NR_PORTS)
+	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
 		return -EINVAL;
 
 	if (!port->mapbase) {
@@ -1175,55 +1129,53 @@ static int __init xuartps_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-static struct uart_driver xuartps_uart_driver;
+static struct uart_driver cdns_uart_uart_driver;
 
-static struct console xuartps_console = {
-	.name	= XUARTPS_TTY_NAME,
-	.write	= xuartps_console_write,
+static struct console cdns_uart_console = {
+	.name	= CDNS_UART_TTY_NAME,
+	.write	= cdns_uart_console_write,
 	.device	= uart_console_device,
-	.setup	= xuartps_console_setup,
+	.setup	= cdns_uart_console_setup,
 	.flags	= CON_PRINTBUFFER,
 	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
-	.data	= &xuartps_uart_driver,
+	.data	= &cdns_uart_uart_driver,
 };
 
 /**
- * xuartps_console_init - Initialization call
+ * cdns_uart_console_init - Initialization call
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int __init xuartps_console_init(void)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int __init cdns_uart_console_init(void)
 {
-	register_console(&xuartps_console);
+	register_console(&cdns_uart_console);
 	return 0;
 }
 
-console_initcall(xuartps_console_init);
+console_initcall(cdns_uart_console_init);
 
 #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
 
-/** Structure Definitions
- */
-static struct uart_driver xuartps_uart_driver = {
-	.owner		= THIS_MODULE,		/* Owner */
-	.driver_name	= XUARTPS_NAME,		/* Driver name */
-	.dev_name	= XUARTPS_TTY_NAME,	/* Node name */
-	.major		= XUARTPS_MAJOR,	/* Major number */
-	.minor		= XUARTPS_MINOR,	/* Minor number */
-	.nr		= XUARTPS_NR_PORTS,	/* Number of UART ports */
+static struct uart_driver cdns_uart_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= CDNS_UART_NAME,
+	.dev_name	= CDNS_UART_TTY_NAME,
+	.major		= CDNS_UART_MAJOR,
+	.minor		= CDNS_UART_MINOR,
+	.nr		= CDNS_UART_NR_PORTS,
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
-	.cons		= &xuartps_console,	/* Console */
+	.cons		= &cdns_uart_console,
 #endif
 };
 
 #ifdef CONFIG_PM_SLEEP
 /**
- * xuartps_suspend - suspend event
+ * cdns_uart_suspend - suspend event
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
-static int xuartps_suspend(struct device *device)
+static int cdns_uart_suspend(struct device *device)
 {
 	struct uart_port *port = dev_get_drvdata(device);
 	struct tty_struct *tty;
@@ -1242,23 +1194,24 @@ static int xuartps_suspend(struct device *device)
 	 * Call the API provided in serial_core.c file which handles
 	 * the suspend.
 	 */
-	uart_suspend_port(&xuartps_uart_driver, port);
+	uart_suspend_port(&cdns_uart_uart_driver, port);
 	if (console_suspend_enabled && !may_wake) {
-		struct xuartps *xuartps = port->private_data;
+		struct cdns_uart *cdns_uart = port->private_data;
 
-		clk_disable(xuartps->refclk);
-		clk_disable(xuartps->aperclk);
+		clk_disable(cdns_uart->uartclk);
+		clk_disable(cdns_uart->pclk);
 	} else {
 		unsigned long flags = 0;
 
 		spin_lock_irqsave(&port->lock, flags);
 		/* Empty the receive FIFO 1st before making changes */
-		while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
-			xuartps_readl(XUARTPS_FIFO_OFFSET);
+		while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+					CDNS_UART_SR_RXEMPTY))
+			cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 		/* set RX trigger level to 1 */
-		xuartps_writel(1, XUARTPS_RXWM_OFFSET);
+		cdns_uart_writel(1, CDNS_UART_RXWM_OFFSET);
 		/* disable RX timeout interrups */
-		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IDR_OFFSET);
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
@@ -1266,12 +1219,12 @@ static int xuartps_suspend(struct device *device)
 }
 
 /**
- * xuartps_resume - Resume after a previous suspend
+ * cdns_uart_resume - Resume after a previous suspend
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
-static int xuartps_resume(struct device *device)
+static int cdns_uart_resume(struct device *device)
 {
 	struct uart_port *port = dev_get_drvdata(device);
 	unsigned long flags = 0;
@@ -1289,87 +1242,95 @@ static int xuartps_resume(struct device *device)
 	}
 
 	if (console_suspend_enabled && !may_wake) {
-		struct xuartps *xuartps = port->private_data;
+		struct cdns_uart *cdns_uart = port->private_data;
 
-		clk_enable(xuartps->aperclk);
-		clk_enable(xuartps->refclk);
+		clk_enable(cdns_uart->pclk);
+		clk_enable(cdns_uart->uartclk);
 
 		spin_lock_irqsave(&port->lock, flags);
 
 		/* Set TX/RX Reset */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-				XUARTPS_CR_OFFSET);
-		while (xuartps_readl(XUARTPS_CR_OFFSET) &
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+		while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
 			cpu_relax();
 
 		/* restore rx timeout value */
-		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+		cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 		/* Enable Tx/Rx */
-		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-		xuartps_writel(
-			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
-			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
 		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
 		spin_lock_irqsave(&port->lock, flags);
 		/* restore original rx trigger level */
-		xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+		cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
 		/* enable RX timeout interrupt */
-		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IER_OFFSET);
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
-	return uart_resume_port(&xuartps_uart_driver, port);
+	return uart_resume_port(&cdns_uart_uart_driver, port);
 }
 #endif /* ! CONFIG_PM_SLEEP */
 
-static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
+static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
+		cdns_uart_resume);
 
-/* ---------------------------------------------------------------------
- * Platform bus binding
- */
 /**
- * xuartps_probe - Platform driver probe
+ * cdns_uart_probe - Platform driver probe
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_probe(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_probe(struct platform_device *pdev)
 {
-	int rc;
+	int rc, id;
 	struct uart_port *port;
 	struct resource *res, *res2;
-	struct xuartps *xuartps_data;
+	struct cdns_uart *cdns_uart_data;
 
-	xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
+	cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
 			GFP_KERNEL);
-	if (!xuartps_data)
+	if (!cdns_uart_data)
 		return -ENOMEM;
 
-	xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
-	if (IS_ERR(xuartps_data->aperclk)) {
-		dev_err(&pdev->dev, "aper_clk clock not found.\n");
-		return PTR_ERR(xuartps_data->aperclk);
+	cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(cdns_uart_data->pclk)) {
+		cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
+		if (!IS_ERR(cdns_uart_data->pclk))
+			dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
 	}
-	xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
-	if (IS_ERR(xuartps_data->refclk)) {
-		dev_err(&pdev->dev, "ref_clk clock not found.\n");
-		return PTR_ERR(xuartps_data->refclk);
+	if (IS_ERR(cdns_uart_data->pclk)) {
+		dev_err(&pdev->dev, "pclk clock not found.\n");
+		return PTR_ERR(cdns_uart_data->pclk);
 	}
 
-	rc = clk_prepare_enable(xuartps_data->aperclk);
+	cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+	if (IS_ERR(cdns_uart_data->uartclk)) {
+		cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
+		if (!IS_ERR(cdns_uart_data->uartclk))
+			dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
+	}
+	if (IS_ERR(cdns_uart_data->uartclk)) {
+		dev_err(&pdev->dev, "uart_clk clock not found.\n");
+		return PTR_ERR(cdns_uart_data->uartclk);
+	}
+
+	rc = clk_prepare_enable(cdns_uart_data->pclk);
 	if (rc) {
-		dev_err(&pdev->dev, "Unable to enable APER clock.\n");
+		dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
 		return rc;
 	}
-	rc = clk_prepare_enable(xuartps_data->refclk);
+	rc = clk_prepare_enable(cdns_uart_data->uartclk);
 	if (rc) {
 		dev_err(&pdev->dev, "Unable to enable device clock.\n");
-		goto err_out_clk_dis_aper;
+		goto err_out_clk_dis_pclk;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1385,15 +1346,19 @@ static int xuartps_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_COMMON_CLK
-	xuartps_data->clk_rate_change_nb.notifier_call =
-			xuartps_clk_notifier_cb;
-	if (clk_notifier_register(xuartps_data->refclk,
-				&xuartps_data->clk_rate_change_nb))
+	cdns_uart_data->clk_rate_change_nb.notifier_call =
+			cdns_uart_clk_notifier_cb;
+	if (clk_notifier_register(cdns_uart_data->uartclk,
+				&cdns_uart_data->clk_rate_change_nb))
 		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
 #endif
+	/* Look for a serialN alias */
+	id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (id < 0)
+		id = 0;
 
 	/* Initialize the port structure */
-	port = xuartps_get_port();
+	port = cdns_uart_get_port(id);
 
 	if (!port) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
@@ -1407,11 +1372,11 @@ static int xuartps_probe(struct platform_device *pdev)
 		port->mapbase = res->start;
 		port->irq = res2->start;
 		port->dev = &pdev->dev;
-		port->uartclk = clk_get_rate(xuartps_data->refclk);
-		port->private_data = xuartps_data;
-		xuartps_data->port = port;
+		port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+		port->private_data = cdns_uart_data;
+		cdns_uart_data->port = port;
 		platform_set_drvdata(pdev, port);
-		rc = uart_add_one_port(&xuartps_uart_driver, port);
+		rc = uart_add_one_port(&cdns_uart_uart_driver, port);
 		if (rc) {
 			dev_err(&pdev->dev,
 				"uart_add_one_port() failed; err=%i\n", rc);
@@ -1422,103 +1387,89 @@ static int xuartps_probe(struct platform_device *pdev)
 
 err_out_notif_unreg:
 #ifdef CONFIG_COMMON_CLK
-	clk_notifier_unregister(xuartps_data->refclk,
-			&xuartps_data->clk_rate_change_nb);
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
 #endif
 err_out_clk_disable:
-	clk_disable_unprepare(xuartps_data->refclk);
-err_out_clk_dis_aper:
-	clk_disable_unprepare(xuartps_data->aperclk);
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+err_out_clk_dis_pclk:
+	clk_disable_unprepare(cdns_uart_data->pclk);
 
 	return rc;
 }
 
 /**
- * xuartps_remove - called when the platform driver is unregistered
+ * cdns_uart_remove - called when the platform driver is unregistered
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_remove(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct xuartps *xuartps_data = port->private_data;
+	struct cdns_uart *cdns_uart_data = port->private_data;
 	int rc;
 
-	/* Remove the xuartps port from the serial core */
+	/* Remove the cdns_uart port from the serial core */
 #ifdef CONFIG_COMMON_CLK
-	clk_notifier_unregister(xuartps_data->refclk,
-			&xuartps_data->clk_rate_change_nb);
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
 #endif
-	rc = uart_remove_one_port(&xuartps_uart_driver, port);
+	rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
 	port->mapbase = 0;
-	clk_disable_unprepare(xuartps_data->refclk);
-	clk_disable_unprepare(xuartps_data->aperclk);
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+	clk_disable_unprepare(cdns_uart_data->pclk);
 	return rc;
 }
 
 /* Match table for of_platform binding */
-static struct of_device_id xuartps_of_match[] = {
+static struct of_device_id cdns_uart_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
+	{ .compatible = "cdns,uart-r1p8", },
 	{}
 };
-MODULE_DEVICE_TABLE(of, xuartps_of_match);
+MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
 
-static struct platform_driver xuartps_platform_driver = {
-	.probe   = xuartps_probe,		/* Probe method */
-	.remove  = xuartps_remove,		/* Detach method */
+static struct platform_driver cdns_uart_platform_driver = {
+	.probe   = cdns_uart_probe,
+	.remove  = cdns_uart_remove,
 	.driver  = {
 		.owner = THIS_MODULE,
-		.name = XUARTPS_NAME,		/* Driver name */
-		.of_match_table = xuartps_of_match,
-		.pm = &xuartps_dev_pm_ops,
+		.name = CDNS_UART_NAME,
+		.of_match_table = cdns_uart_of_match,
+		.pm = &cdns_uart_dev_pm_ops,
 		},
 };
 
-/* ---------------------------------------------------------------------
- * Module Init and Exit
- */
-/**
- * xuartps_init - Initial driver registration call
- *
- * Returns whether the registration was successful or not
- **/
-static int __init xuartps_init(void)
+static int __init cdns_uart_init(void)
 {
 	int retval = 0;
 
-	/* Register the xuartps driver with the serial core */
-	retval = uart_register_driver(&xuartps_uart_driver);
+	/* Register the cdns_uart driver with the serial core */
+	retval = uart_register_driver(&cdns_uart_uart_driver);
 	if (retval)
 		return retval;
 
 	/* Register the platform driver */
-	retval = platform_driver_register(&xuartps_platform_driver);
+	retval = platform_driver_register(&cdns_uart_platform_driver);
 	if (retval)
-		uart_unregister_driver(&xuartps_uart_driver);
+		uart_unregister_driver(&cdns_uart_uart_driver);
 
 	return retval;
 }
 
-/**
- * xuartps_exit - Driver unregistration call
- **/
-static void __exit xuartps_exit(void)
+static void __exit cdns_uart_exit(void)
 {
-	/* The order of unregistration is important. Unregister the
-	 * UART driver before the platform driver crashes the system.
-	 */
-
 	/* Unregister the platform driver */
-	platform_driver_unregister(&xuartps_platform_driver);
+	platform_driver_unregister(&cdns_uart_platform_driver);
 
-	/* Unregister the xuartps driver */
-	uart_unregister_driver(&xuartps_uart_driver);
+	/* Unregister the cdns_uart driver */
+	uart_unregister_driver(&cdns_uart_uart_driver);
 }
 
-module_init(xuartps_init);
-module_exit(xuartps_exit);
+module_init(cdns_uart_init);
+module_exit(cdns_uart_exit);
 
-MODULE_DESCRIPTION("Driver for PS UART");
+MODULE_DESCRIPTION("Driver for Cadence UART");
 MODULE_AUTHOR("Xilinx Inc.");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 2978ca596a7f..610b720d3b91 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -179,7 +179,6 @@ struct uni_pagedir {
 	unsigned long	sum;
 	unsigned char	*inverse_translations[4];
 	u16		*inverse_trans_unicode;
-	int		readonly;
 };
 
 static struct uni_pagedir *dflt;
@@ -262,7 +261,7 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
 	int m;
 	if (glyph < 0 || glyph >= MAX_GLYPH)
 		return 0;
-	else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc))
+	else if (!(p = *conp->vc_uni_pagedir_loc))
 		return glyph;
 	else if (use_unicode) {
 		if (!p->inverse_trans_unicode)
@@ -287,7 +286,7 @@ static void update_user_maps(void)
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
 		if (!vc_cons_allocated(i))
 			continue;
-		p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
+		p = *vc_cons[i].d->vc_uni_pagedir_loc;
 		if (p && p != q) {
 			set_inverse_transl(vc_cons[i].d, p, USER_MAP);
 			set_inverse_trans_unicode(vc_cons[i].d, p);
@@ -418,10 +417,10 @@ void con_free_unimap(struct vc_data *vc)
 {
 	struct uni_pagedir *p;
 
-	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+	p = *vc->vc_uni_pagedir_loc;
 	if (!p)
 		return;
-	*vc->vc_uni_pagedir_loc = 0;
+	*vc->vc_uni_pagedir_loc = NULL;
 	if (--p->refcount)
 		return;
 	con_release_unimap(p);
@@ -436,7 +435,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
 		if (!vc_cons_allocated(i))
 			continue;
-		q = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
+		q = *vc_cons[i].d->vc_uni_pagedir_loc;
 		if (!q || q == p || q->sum != p->sum)
 			continue;
 		for (j = 0; j < 32; j++) {
@@ -459,7 +458,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
 		}
 		if (j == 32) {
 			q->refcount++;
-			*conp->vc_uni_pagedir_loc = (unsigned long)q;
+			*conp->vc_uni_pagedir_loc = q;
 			con_release_unimap(p);
 			kfree(p);
 			return 1;
@@ -500,10 +499,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
 {
 	struct uni_pagedir *p, *q;
 
-	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-	if (p && p->readonly)
-		return -EIO;
-
+	p = *vc->vc_uni_pagedir_loc;
 	if (!p || --p->refcount) {
 		q = kzalloc(sizeof(*p), GFP_KERNEL);
 		if (!q) {
@@ -512,7 +508,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
 			return -ENOMEM;
 		}
 		q->refcount=1;
-		*vc->vc_uni_pagedir_loc = (unsigned long)q;
+		*vc->vc_uni_pagedir_loc = q;
 	} else {
 		if (p == dflt) dflt = NULL;
 		p->refcount++;
@@ -536,19 +532,13 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 	int err = 0, err1, i;
 	struct uni_pagedir *p, *q;
 
+	if (!ct)
+		return 0;
+
 	console_lock();
 
 	/* Save original vc_unipagdir_loc in case we allocate a new one */
-	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-	if (p->readonly) {
-		console_unlock();
-		return -EIO;
-	}
-	
-	if (!ct) {
-		console_unlock();
-		return 0;
-	}
+	p = *vc->vc_uni_pagedir_loc;
 	
 	if (p->refcount > 1) {
 		int j, k;
@@ -564,7 +554,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 		 * Since refcount was > 1, con_clear_unimap() allocated a
 		 * a new uni_pagedir for this vc.  Re: p != q
 		 */
-		q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+		q = *vc->vc_uni_pagedir_loc;
 
 		/*
 		 * uni_pgdir is a 32*32*64 table with rows allocated
@@ -586,7 +576,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 					err1 = con_insert_unipair(q, l, p2[k]);
 					if (err1) {
 						p->refcount++;
-						*vc->vc_uni_pagedir_loc = (unsigned long)p;
+						*vc->vc_uni_pagedir_loc = p;
 						con_release_unimap(q);
 						kfree(q);
 						console_unlock();
@@ -655,12 +645,12 @@ int con_set_default_unimap(struct vc_data *vc)
 	struct uni_pagedir *p;
 
 	if (dflt) {
-		p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+		p = *vc->vc_uni_pagedir_loc;
 		if (p == dflt)
 			return 0;
 
 		dflt->refcount++;
-		*vc->vc_uni_pagedir_loc = (unsigned long)dflt;
+		*vc->vc_uni_pagedir_loc = dflt;
 		if (p && !--p->refcount) {
 			con_release_unimap(p);
 			kfree(p);
@@ -674,7 +664,7 @@ int con_set_default_unimap(struct vc_data *vc)
 	if (err)
 		return err;
     
-	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+	p = *vc->vc_uni_pagedir_loc;
 	q = dfont_unitable;
 	
 	for (i = 0; i < 256; i++)
@@ -685,7 +675,7 @@ int con_set_default_unimap(struct vc_data *vc)
 		}
 			
 	if (con_unify_unimap(vc, p)) {
-		dflt = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+		dflt = *vc->vc_uni_pagedir_loc;
 		return err;
 	}
 
@@ -713,9 +703,9 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
 	if (*dst_vc->vc_uni_pagedir_loc == *src_vc->vc_uni_pagedir_loc)
 		return 0;
 	con_free_unimap(dst_vc);
-	q = (struct uni_pagedir *)*src_vc->vc_uni_pagedir_loc;
+	q = *src_vc->vc_uni_pagedir_loc;
 	q->refcount++;
-	*dst_vc->vc_uni_pagedir_loc = (long)q;
+	*dst_vc->vc_uni_pagedir_loc = q;
 	return 0;
 }
 EXPORT_SYMBOL(con_copy_unimap);
@@ -737,7 +727,7 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 
 	ect = 0;
 	if (*vc->vc_uni_pagedir_loc) {
-		p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+		p = *vc->vc_uni_pagedir_loc;
 		for (i = 0; i < 32; i++)
 		if ((p1 = p->uni_pgdir[i]))
 			for (j = 0; j < 32; j++)
@@ -810,7 +800,7 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
 	if (!*conp->vc_uni_pagedir_loc)
 		return -3;
 
-	p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc;  
+	p = *conp->vc_uni_pagedir_loc;
 	if ((p1 = p->uni_pgdir[ucs >> 11]) &&
 	    (p2 = p1[(ucs >> 6) & 0x1f]) &&
 	    (h = p2[ucs & 0x3f]) < MAX_GLYPH)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 3ad0b61e35b4..5e0f6ff2e2f5 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -735,7 +735,7 @@ static void visual_init(struct vc_data *vc, int num, int init)
 	vc->vc_num = num;
 	vc->vc_display_fg = &master_display_fg;
 	vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir;
-	vc->vc_uni_pagedir = 0;
+	vc->vc_uni_pagedir = NULL;
 	vc->vc_hi_font_mask = 0;
 	vc->vc_complement_mask = 0;
 	vc->vc_can_do_color = 0;
@@ -1231,6 +1231,52 @@ static void default_attr(struct vc_data *vc)
 	vc->vc_color = vc->vc_def_color;
 }
 
+struct rgb { u8 r; u8 g; u8 b; };
+
+struct rgb rgb_from_256(int i)
+{
+	struct rgb c;
+	if (i < 8) {            /* Standard colours. */
+		c.r = i&1 ? 0xaa : 0x00;
+		c.g = i&2 ? 0xaa : 0x00;
+		c.b = i&4 ? 0xaa : 0x00;
+	} else if (i < 16) {
+		c.r = i&1 ? 0xff : 0x55;
+		c.g = i&2 ? 0xff : 0x55;
+		c.b = i&4 ? 0xff : 0x55;
+	} else if (i < 232) {   /* 6x6x6 colour cube. */
+		c.r = (i - 16) / 36 * 85 / 2;
+		c.g = (i - 16) / 6 % 6 * 85 / 2;
+		c.b = (i - 16) % 6 * 85 / 2;
+	} else                  /* Grayscale ramp. */
+		c.r = c.g = c.b = i * 10 - 2312;
+	return c;
+}
+
+static void rgb_foreground(struct vc_data *vc, struct rgb c)
+{
+	u8 hue, max = c.r;
+	if (c.g > max)
+		max = c.g;
+	if (c.b > max)
+		max = c.b;
+	hue = (c.r > max/2 ? 4 : 0)
+	    | (c.g > max/2 ? 2 : 0)
+	    | (c.b > max/2 ? 1 : 0);
+	if (hue == 7 && max <= 0x55)
+		hue = 0, vc->vc_intensity = 2;
+	else
+		vc->vc_intensity = (max > 0xaa) + 1;
+	vc->vc_color = (vc->vc_color & 0xf0) | hue;
+}
+
+static void rgb_background(struct vc_data *vc, struct rgb c)
+{
+	/* For backgrounds, err on the dark side. */
+	vc->vc_color = (vc->vc_color & 0x0f)
+		| (c.r&0x80) >> 1 | (c.g&0x80) >> 2 | (c.b&0x80) >> 3;
+}
+
 /* console_lock is held */
 static void csi_m(struct vc_data *vc)
 {
@@ -1302,8 +1348,7 @@ static void csi_m(struct vc_data *vc)
 			case 27:
 				vc->vc_reverse = 0;
 				break;
-			case 38:
-			case 48: /* ITU T.416
+			case 38: /* ITU T.416
 				  * Higher colour modes.
 				  * They break the usual properties of SGR codes
 				  * and thus need to be detected and ignored by
@@ -1315,15 +1360,41 @@ static void csi_m(struct vc_data *vc)
 				i++;
 				if (i > vc->vc_npar)
 					break;
-				if (vc->vc_par[i] == 5)      /* 256 colours */
-					i++;                 /* ubiquitous */
-				else if (vc->vc_par[i] == 2) /* 24 bit colours */
-					i += 3;              /* extremely rare */
+				if (vc->vc_par[i] == 5 &&  /* 256 colours */
+				    i < vc->vc_npar) {     /* ubiquitous */
+					i++;
+					rgb_foreground(vc,
+						rgb_from_256(vc->vc_par[i]));
+				} else if (vc->vc_par[i] == 2 &&  /* 24 bit */
+				           i <= vc->vc_npar + 3) {/* extremely rare */
+					struct rgb c = {r:vc->vc_par[i+1],
+							g:vc->vc_par[i+2],
+							b:vc->vc_par[i+3]};
+					rgb_foreground(vc, c);
+					i += 3;
+				}
 				/* Subcommands 3 (CMY) and 4 (CMYK) are so insane
-				 * that detecting them is not worth the few extra
-				 * bytes of kernel's size.
+				 * there's no point in supporting them.
 				 */
 				break;
+			case 48:
+				i++;
+				if (i > vc->vc_npar)
+					break;
+				if (vc->vc_par[i] == 5 &&  /* 256 colours */
+				    i < vc->vc_npar) {
+					i++;
+					rgb_background(vc,
+						rgb_from_256(vc->vc_par[i]));
+				} else if (vc->vc_par[i] == 2 && /* 24 bit */
+				           i <= vc->vc_npar + 3) {
+					struct rgb c = {r:vc->vc_par[i+1],
+							g:vc->vc_par[i+2],
+							b:vc->vc_par[i+3]};
+					rgb_background(vc, c);
+					i += 3;
+				}
+				break;
 			case 39:
 				vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
 				break;