summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtlwifi/rtl8192ce
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2010-12-21 19:40:40 -0600
committerJohn W. Linville <linville@tuxdriver.com>2010-12-22 15:43:31 -0500
commite6d8a817d00793eecd063b1548bbc954ab62b124 (patch)
tree3a39436d74d406d43f2443548b59d6773b2b442a /drivers/net/wireless/rtlwifi/rtl8192ce
parent40d70dd12200ffeacfe9caaa8242e3ad2995bb5d (diff)
downloadtalos-op-linux-e6d8a817d00793eecd063b1548bbc954ab62b124.tar.gz
talos-op-linux-e6d8a817d00793eecd063b1548bbc954ab62b124.zip
rtlwifi: rtl8192ce: Fix driver problem when radio switch off at module load
If the radio enable switch is off when the driver is loaded, it is not possible to get radio output until the driver is unloaded and reloaded with the switch on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192ce')
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192ce/hw.c11
1 files changed, 0 insertions, 11 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 1266dbe44176..1c41a0c93506 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -962,17 +962,6 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
rtl_cam_reset_all_entry(hw);
rtl92ce_enable_hw_security_config(hw);
ppsc->rfpwr_state = ERFON;
- tmp_u1b = rtl_read_byte(rtlpriv, REG_MAC_PINMUX_CFG)&(~BIT(3));
- rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, tmp_u1b);
- tmp_u1b = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
- ppsc->rfoff_reason |= (tmp_u1b & BIT(3)) ? 0 : RF_CHANGE_BY_HW;
- if (ppsc->rfoff_reason > RF_CHANGE_BY_PS)
- rtl_ps_set_rf_state(hw, ERFOFF, ppsc->rfoff_reason, true);
- else {
- ppsc->rfpwr_state = ERFON;
- ppsc->rfoff_reason = 0;
- rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
- }
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
_rtl92ce_enable_aspm_back_door(hw);
rtlpriv->intf_ops->enable_aspm(hw);
OpenPOWER on IntegriCloud